Commit Graph

1615 Commits

Author SHA1 Message Date
Luis Henriques
503f82a993 ceph: support copy_file_range file operation
This commit implements support for the copy_file_range syscall in cephfs.
It is implemented using the RADOS 'copy-from' operation, which allows to
do a remote object copy, without the need to download/upload data from/to
the OSDs.

Some manual copy may however be required if the source/destination file
offsets aren't object aligned or if the copy length is smaller than the
object size.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:24 +02:00
Luis Henriques
2ee9dd958d ceph: add non-blocking parameter to ceph_try_get_caps()
ceph_try_get_caps currently calls try_get_cap_refs with the nonblock
parameter always set to 'true'.  This change adds a new parameter that
allows to set it's value.  This will be useful for a follow-up patch that
will need to get two sets of capabilities for two different inodes without
risking a deadlock.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:23 +02:00
Ilya Dryomov
0d9c1ab3be libceph: preallocate message data items
Currently message data items are allocated with ceph_msg_data_create()
in setup_request_data() inside send_request().  send_request() has never
been allowed to fail, so each allocation is followed by a BUG_ON:

  data = ceph_msg_data_create(...);
  BUG_ON(!data);

It's been this way since support for multiple message data items was
added in commit 6644ed7b7e ("libceph: make message data be a pointer")
in 3.10.

There is no reason to delay the allocation of message data items until
the last possible moment and we certainly don't need a linked list of
them as they are only ever appended to the end and never erased.  Make
ceph_msg_new2() take max_data_items and adapt the rest of the code.

Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov
26f887e0a3 libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known.  In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov
61d2f85504 ceph: num_ops is off by one in ceph_aio_retry_work()
Two OSD op slots are allocated, but only one is ever used.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Xuehan Xu
6680288441 ceph: set timeout conditionally in __cap_delay_requeue
__cap_delay_requeue could be invoked through ceph_check_caps when there
exists caps that needs to be sent and are delayed by "i_hold_caps_min"
or "i_hold_caps_max". If __cap_delay_requeue sets timeout unconditionally,
there could be a chance that some "wanted" caps can not be release for a
long since their timeouts are reset every time they get delayed.

Fixes: http://tracker.ceph.com/issues/36369
Signed-off-by: Xuehan Xu <xuxuehan@360.cn>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Ilya Dryomov
894868330a libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()
Because send_mds_reconnect() wants to send a message with a pagelist
and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
consumes a ref which is then put in ceph_msg_data_destroy().  This
makes managing pagelists in the OSD client (where they are wrapped in
ceph_osd_data) unnecessarily hard because the handoff only happens in
ceph_osdc_start_request() instead of when the pagelist is passed to
ceph_osd_data_pagelist_init().  I counted several memory leaks on
various error paths.

Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
ceph_osd_data.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Ilya Dryomov
33165d4723 libceph: introduce ceph_pagelist_alloc()
struct ceph_pagelist cannot be embedded into anything else because it
has its own refcount.  Merge allocation and initialization together.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Luis Henriques
bddff633ab ceph: only allow punch hole mode in fallocate
Current implementation of cephfs fallocate isn't correct as it doesn't
really reserve the space in the cluster, which means that a subsequent
call to a write may actually fail due to lack of space.  In fact, it is
currently possible to fallocate an amount space that is larger than the
free space in the cluster.  It has behaved this way since the initial
commit ad7a60de88 ("ceph: punch hole support").

Since there's no easy solution to fix this at the moment, this patch
simply removes support for all fallocate operations but
FALLOC_FL_PUNCH_HOLE (which implies FALLOC_FL_KEEP_SIZE).

Link: https://tracker.ceph.com/issues/36317
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Yan, Zheng
fce7a9744b ceph: refactor ceph_sync_read()
Avoid allocating memory for the entire user request: striped_read()
does a synchronous OSD request per object, so it doesn't need more than
object size worth of pages at a time.

[ Preserve the comment, changelog. ]

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Yan, Zheng
74c9e6bf4c ceph: check if LOOKUPNAME request was aborted when filling trace
d_lookup()/d_alloc() require parent inode locked. Parent inode is
not locked if request is aborted.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Yan, Zheng
c58f450bd6 ceph: fix dentry leak in ceph_readdir_prepopulate
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Yan, Zheng
efe328230d Revert "ceph: fix dentry leak in splice_dentry()"
This reverts commit 8b8f53af1e.

splice_dentry() is used by three places. For two places, req->r_dentry
is passed to splice_dentry(). In the case of error, req->r_dentry does
not get updated. So splice_dentry() should not drop reference.

Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Chengguang Xu
5da207993e ceph: check snap first in ceph_set_acl()
Do the snap check first in ceph_set_acl(), so we can avoid
unnecessary operations when the inode has snap.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Chengguang Xu
3167893ae6 ceph: reset cap hold timeout only for requeued inode
__cap_delay_requeue() only requeue inode which does not
have CEPH_I_FLUSH flag, so avoid reset cap hold timeout
for that inode.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:19 +02:00
Ilya Dryomov
8aaff15168 ceph: avoid a use-after-free in ceph_destroy_options()
syzbot reported a use-after-free in ceph_destroy_options(), called from
ceph_mount().  The problem was that create_fs_client() consumed the opt
pointer on some errors, but not on all of them.  Make sure it always
consumes both libceph and ceph options.

Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-09-06 16:18:04 +02:00
Linus Torvalds
0a78ac4b9b The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).  Also included
 y2038 conversion patches from Arnd, a pile of miscellaneous fixes from
 Chengguang and Zheng's feature bit infrastructure for the filesystem.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlt62CkTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzizfhB/0c/rz6frunc6EcZMWuBNzlOIOktJ/m
 MEbPGjCxMAsmidO1rqHHYF4iEN5hr+3AWTbtIL2m6wkqYVdg3FjmNaAYB27AdQMG
 kH9bLfrKIew72/NZqXfm25yjY/86kIt8t91kay4Lchc97tSYhnFSnku7iAX2HTND
 TMhq/1O/GvEyw/RmqnenJEQqFJvKnfgPPQm6W8sM2bH0T5j+EXmDT/Rv+90LogFR
 J4+pZkHqDfvyMb1WJ5MkumohytbRVzRNKcMpOvjquJSqUgtgZa2JdrIsypDqSNKY
 nUT6jGGlxoSbHCqRwDJoFEJOlh5A9RwKqYxNuM2a/vs9u7HpvdCK/Iah
 =AtgY
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The main things are support for cephx v2 authentication protocol and
  basic support for rbd images within namespaces (myself).

  Also included are y2038 conversion patches from Arnd, a pile of
  miscellaneous fixes from Chengguang and Zheng's feature bit
  infrastructure for the filesystem"

* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
  ceph: don't drop message if it contains more data than expected
  ceph: support cephfs' own feature bits
  crush: fix using plain integer as NULL warning
  libceph: remove unnecessary non NULL check for request_key
  ceph: refactor error handling code in ceph_reserve_caps()
  ceph: refactor ceph_unreserve_caps()
  ceph: change to void return type for __do_request()
  ceph: compare fsc->max_file_size and inode->i_size for max file size limit
  ceph: add additional size check in ceph_setattr()
  ceph: add additional offset check in ceph_write_iter()
  ceph: add additional range check in ceph_fallocate()
  ceph: add new field max_file_size in ceph_fs_client
  libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
  libceph: check authorizer reply/challenge length before reading
  libceph: implement CEPHX_V2 calculation mode
  libceph: add authorizer challenge
  libceph: factor out encrypt_authorizer()
  libceph: factor out __ceph_x_decrypt()
  libceph: factor out __prepare_write_connect()
  libceph: store ceph_auth_handshake pointer in ceph_connection
  ...
2018-08-20 18:26:55 -07:00
Linus Torvalds
a66b4cd1e7 Merge branch 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs open-related updates from Al Viro:

 - "do we need fput() or put_filp()" rules are gone - it's always fput()
   now. We keep track of that state where it belongs - in ->f_mode.

 - int *opened mess killed - in finish_open(), in ->atomic_open()
   instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().

 - alloc_file() wrappers with saner calling conventions are introduced
   (alloc_file_clone() and alloc_file_pseudo()); callers converted, with
   much simplification.

 - while we are at it, saner calling conventions for path_init() and
   link_path_walk(), simplifying things inside fs/namei.c (both on
   open-related paths and elsewhere).

* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  few more cleanups of link_path_walk() callers
  allow link_path_walk() to take ERR_PTR()
  make path_init() unconditionally paired with terminate_walk()
  document alloc_file() changes
  make alloc_file() static
  do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
  new helper: alloc_file_clone()
  create_pipe_files(): switch the first allocation to alloc_file_pseudo()
  anon_inode_getfile(): switch to alloc_file_pseudo()
  hugetlb_file_setup(): switch to alloc_file_pseudo()
  ocxlflash_getfile(): switch to alloc_file_pseudo()
  cxl_getfile(): switch to alloc_file_pseudo()
  ... and switch shmem_file_setup() to alloc_file_pseudo()
  __shmem_file_setup(): reorder allocations
  new wrapper: alloc_file_pseudo()
  kill FILE_{CREATED,OPENED}
  switch atomic_open() and lookup_open() to returning 0 in all success cases
  document ->atomic_open() changes
  ->atomic_open(): return 0 in all success cases
  get rid of 'opened' in path_openat() and the helpers downstream
  ...
2018-08-13 19:58:36 -07:00
Yan, Zheng
0fcf6c02b2 ceph: don't drop message if it contains more data than expected
Later version mds may encode more data into messages.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:44 +02:00
Yan, Zheng
342ce1823e ceph: support cephfs' own feature bits
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:44 +02:00
Chengguang Xu
e5bc08d09f ceph: refactor error handling code in ceph_reserve_caps()
Call new helper __ceph_unreserve_caps() to reduce duplicated code.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:44 +02:00
Chengguang Xu
7bf8f736c8 ceph: refactor ceph_unreserve_caps()
The code of ceph_unreserve_caps() and error handling in
ceph_reserve_caps() are duplicated, so introduce a helper
__ceph_unreserve_caps() to reduce duplicated code.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:43 +02:00
Chengguang Xu
d554849290 ceph: change to void return type for __do_request()
We do not check return code for __do_request() in all callers,
so change to void return type.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:43 +02:00
Chengguang Xu
9da12e3a7d ceph: compare fsc->max_file_size and inode->i_size for max file size limit
In ceph_llseek(), we compare fsc->max_file_size and inode->i_size to
choose max file size limit.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:43 +02:00
Chengguang Xu
36a4c72d1c ceph: add additional size check in ceph_setattr()
ceph_setattr() finally calls vfs function inode_newsize_ok()
to do offset validation and that is based on sb->s_maxbytes.
Because we set sb->s_maxbytes to MAX_LFS_FILESIZE to through
VFS check and do proper offset validation in cephfs level,
we need adding proper offset validation before calling
inode_newsize_ok().

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:43 +02:00
Chengguang Xu
8687a3e2c7 ceph: add additional offset check in ceph_write_iter()
If the offset is larger or equal to both real file size and
max file size, then return -EFBIG.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:28 +02:00
Chengguang Xu
0671e9968d ceph: add additional range check in ceph_fallocate()
If the range is larger than both real file size and limit of
max file size, then return -EFBIG.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:28 +02:00
Chengguang Xu
719784ba70 ceph: add new field max_file_size in ceph_fs_client
In order to not bother to VFS and other specific filesystems,
we decided to do offset validation inside ceph kernel client,
so just simply set sb->s_maxbytes to MAX_LFS_FILESIZE so that
it can successfully pass VFS check. We add new field max_file_size
in ceph_fs_client to store real file size limit and doing proper
check based on it.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:27 +02:00
Ilya Dryomov
6daca13d2e libceph: add authorizer challenge
When a client authenticates with a service, an authorizer is sent with
a nonce to the service (ceph_x_authorize_[ab]) and the service responds
with a mutation of that nonce (ceph_x_authorize_reply).  This lets the
client verify the service is who it says it is but it doesn't protect
against a replay: someone can trivially capture the exchange and reuse
the same authorizer to authenticate themselves.

Allow the service to reject an initial authorizer with a random
challenge (ceph_x_authorize_challenge).  The client then has to respond
with an updated authorizer proving they are able to decrypt the
service's challenge and that the new authorizer was produced for this
specific connection instance.

The accepting side requires this challenge and response unconditionally
if the client side advertises they have CEPHX_V2 feature bit.

This addresses CVE-2018-1128.

Link: http://tracker.ceph.com/issues/24836
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:24 +02:00
Souptick Joarder
24499847e4 ceph: adding new return type vm_fault_t
Use new return type vm_fault_t for page_mkwrite
and fault handler.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:20 +02:00
Arnd Bergmann
0ed1e90a09 ceph: use timespec64 for r_stamp
The ceph_mds_request stamp still uses the deprecated timespec structure,
this converts it over as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:19 +02:00
Arnd Bergmann
fac02ddf91 libceph: use timespec64 for r_mtime
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.

[ Remove now redundant ts variable in writepage_nounlock(). ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:14 +02:00
Arnd Bergmann
9bbeab41ce ceph: use timespec64 for inode timestamp
Since the vfs structures are all using timespec64, we can now
change the internal representation, using ceph_encode_timespec64 and
ceph_decode_timespec64.

In case of ceph_aux_inode however, we need to avoid doing a memcmp()
on uninitialized padding data, so the members of the i_mtime field get
copied individually into 64-bit integers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:12 +02:00
Arnd Bergmann
63ecae7e43 ceph: stop using current_kernel_time()
ceph_mdsc_create_request() is one of the last callers of the
deprecated current_kernel_time() as well as timespec_trunc().

This changes it to use the timespec64 based interfaces instead,
though we still need to convert the result until we are ready to
change over req->r_stamp.

The output of the two functions, ktime_get_coarse_real_ts64() and
current_kernel_time() is the same coarse-granular timestamp,
the only difference here is that ktime_get_coarse_real_ts64()
doesn't overflow in 2038.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:12 +02:00
Chengguang Xu
67fcd15140 ceph: add d_drop for some error cases in ceph_symlink()
When file num exceeds quota limit, should call d_drop to drop
dentry from cache as well.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:12 +02:00
Chengguang Xu
0459871c49 ceph: add d_drop for some error cases in ceph_mknod()
When file num exceeds quota limit or fails from ceph_per_init_acls()
should call d_drop to drop dentry from cache as well.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:12 +02:00
Chengguang Xu
61ad36d47d ceph: return errors from posix_acl_equiv_mode() correctly
In order to return correct error code should replace variable ret
using err in error case.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:12 +02:00
Yan, Zheng
dfeb84d4ad ceph: fix incorrect use of strncpy
GCC8 prints following warning:

 fs/ceph/mds_client.c:3683:2: warning: ‘strncpy’ output may be truncated
 copying 64 bytes from a string of length 64 [-Wstringop-truncation]

[ Change to strscpy() while at it. ]

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Ilya Dryomov
2f56b6bae7 libceph: amend "bad option arg" error message
Don't mention "mount" -- in the rbd case it is "mapping".

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Chengguang Xu
93d35c754d ceph: restore ctime as well in the case of restoring old mode
It's better to restore ctime as well in the case of restoring old mode
in ceph_set_acl().

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Chengguang Xu
f017754d69 ceph: add retry logic for error -ERANGE in ceph_get_acl()
When the size of acl extended attribution is larger than pre-allocated
value buffer size, we will hit error '-ERANGE' and it's probabaly caused
by concurrent get/set acl from different clients. In this case, current
logic just sets acl to NULL so that we cannot get proper information but
the operation looks successful.

This patch adds retry logic for error -ERANGE and return -EIO if fail
from the retry. Additionally, print real errno when failing from
__ceph_getxattr().

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Al Viro
44907d7900 get rid of 'opened' argument of ->atomic_open() - part 3
now it can be done...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:20 -04:00
Al Viro
be12af3ef5 getting rid of 'opened' argument of ->atomic_open() - part 1
'opened' argument of finish_open() is unused.  Kill it.

Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:19 -04:00
Al Viro
73a09dd943 introduce FMODE_CREATED and switch to it
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now).  IMA is another one (here and everywhere)...

Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:18 -04:00
Yan, Zheng
8b8f53af1e ceph: fix dentry leak in splice_dentry()
In any case, d_splice_alias() does not drop reference of original
dentry.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-26 18:42:44 +02:00
Linus Torvalds
7a932516f5 vfs/y2038: inode timestamps conversion to timespec64
This is a late set of changes from Deepa Dinamani doing an automated
 treewide conversion of the inode and iattr structures from 'timespec'
 to 'timespec64', to push the conversion from the VFS layer into the
 individual file systems.
 
 There were no conflicts between this and the contents of linux-next
 until just before the merge window, when we saw multiple problems:
 
 - A minor conflict with my own y2038 fixes, which I could address
   by adding another patch on top here.
 - One semantic conflict with late changes to the NFS tree. I addressed
   this by merging Deepa's original branch on top of the changes that
   now got merged into mainline and making sure the merge commit includes
   the necessary changes as produced by coccinelle.
 - A trivial conflict against the removal of staging/lustre.
 - Multiple conflicts against the VFS changes in the overlayfs tree.
   These are still part of linux-next, but apparently this is no longer
   intended for 4.18 [1], so I am ignoring that part.
 
 As Deepa writes:
 
   The series aims to switch vfs timestamps to use struct timespec64.
   Currently vfs uses struct timespec, which is not y2038 safe.
 
   The series involves the following:
   1. Add vfs helper functions for supporting struct timepec64 timestamps.
   2. Cast prints of vfs timestamps to avoid warnings after the switch.
   3. Simplify code using vfs timestamps so that the actual
      replacement becomes easy.
   4. Convert vfs timestamps to use struct timespec64 using a script.
      This is a flag day patch.
 
   Next steps:
   1. Convert APIs that can handle timespec64, instead of converting
      timestamps at the boundaries.
   2. Update internal data structures to avoid timestamp conversions.
 
 Thomas Gleixner adds:
 
   I think there is no point to drag that out for the next merge window.
   The whole thing needs to be done in one go for the core changes which
   means that you're going to play that catchup game forever. Let's get
   over with it towards the end of the merge window.
 
 [1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbInZAAAoJEGCrR//JCVInReoQAIlVIIMt5ZX6wmaKbrjy9Itf
 MfgbFihQ/djLnuSPVQ3nztcxF0d66BKHZ9puVjz6+mIHqfDvJTRwZs9nU+sOF/T1
 g78fRkM1cxq6ZCkGYAbzyjyo5aC4PnSMP/NQLmwqvi0MXqqrbDoq5ZdP9DHJw39h
 L9lD8FM/P7T29Fgp9tq/pT5l9X8VU8+s5KQG1uhB5hii4VL6pD6JyLElDita7rg+
 Z7/V7jkxIGEUWF7vGaiR1QTFzEtpUA/exDf9cnsf51OGtK/LJfQ0oiZPPuq3oA/E
 LSbt8YQQObc+dvfnGxwgxEg1k5WP5ekj/Wdibv/+rQKgGyLOTz6Q4xK6r8F2ahxs
 nyZQBdXqHhJYyKr1H1reUH3mrSgQbE5U5R1i3My0xV2dSn+vtK5vgF21v2Ku3A1G
 wJratdtF/kVBzSEQUhsYTw14Un+xhBLRWzcq0cELonqxaKvRQK9r92KHLIWNE7/v
 c0TmhFbkZA+zR8HdsaL3iYf1+0W/eYy8PcvepyldKNeW2pVk3CyvdTfY2Z87G2XK
 tIkK+BUWbG3drEGG3hxZ3757Ln3a9qWyC5ruD3mBVkuug/wekbI8PykYJS7Mx4s/
 WNXl0dAL0Eeu1M8uEJejRAe1Q3eXoMWZbvCYZc+wAm92pATfHVcKwPOh8P7NHlfy
 A3HkjIBrKW5AgQDxfgvm
 =CZX2
 -----END PGP SIGNATURE-----

Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
 "This is a late set of changes from Deepa Dinamani doing an automated
  treewide conversion of the inode and iattr structures from 'timespec'
  to 'timespec64', to push the conversion from the VFS layer into the
  individual file systems.

  As Deepa writes:

   'The series aims to switch vfs timestamps to use struct timespec64.
    Currently vfs uses struct timespec, which is not y2038 safe.

    The series involves the following:
    1. Add vfs helper functions for supporting struct timepec64
       timestamps.
    2. Cast prints of vfs timestamps to avoid warnings after the switch.
    3. Simplify code using vfs timestamps so that the actual replacement
       becomes easy.
    4. Convert vfs timestamps to use struct timespec64 using a script.
       This is a flag day patch.

    Next steps:
    1. Convert APIs that can handle timespec64, instead of converting
       timestamps at the boundaries.
    2. Update internal data structures to avoid timestamp conversions'

  Thomas Gleixner adds:

   'I think there is no point to drag that out for the next merge
    window. The whole thing needs to be done in one go for the core
    changes which means that you're going to play that catchup game
    forever. Let's get over with it towards the end of the merge window'"

* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  pstore: Remove bogus format string definition
  vfs: change inode times to use struct timespec64
  pstore: Convert internal records to timespec64
  udf: Simplify calls to udf_disk_stamp_to_time
  fs: nfs: get rid of memcpys for inode times
  ceph: make inode time prints to be long long
  lustre: Use long long type to print inode time
  fs: add timespec64_truncate()
2018-06-15 07:31:07 +09:00
Linus Torvalds
dc594c39f7 The main piece is a set of libceph changes that revamps how OSD
requests are aborted, improving CephFS ENOSPC handling and making
 "umount -f" actually work (Zheng and myself).  The rest is mostly
 mount option handling cleanups from Chengguang and assorted fixes
 from Zheng, Luis and Dongsheng.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJbIkigAAoJEEp/3jgCEfOL3EUH/1s7Ib3FgFzG/SPPKISxZOGr
 ndZGg0rPT9mPIQ4rp6t0z/cDlMrluPmCK3sWrAPe//sZz9iZiuip+mCL0gUFXFNr
 1kL2xDKkJzGxtP3UlUvr5CC6bnxLdeBXJRBDLk/swtphuqArKndlbN/iLZnCZivT
 uJDk+vZTwNJ3UhQP4QdnOQLV60NYs+q4euTqbZF3+pDiRiONbxRfXC3adFsc8zL9
 zlie3CHPbrQHWMsfNvbfM3rBH1WhTwEssDm+IEFlKl19q9SKP2WPZfmBcE1pmZ58
 AhIMoNGdQha1FXS6N96kaPaqFgeysPnEPoyHDqLxsUMKqsvJlOEZsK1jujza4rE=
 =EfXm
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The main piece is a set of libceph changes that revamps how OSD
  requests are aborted, improving CephFS ENOSPC handling and making
  "umount -f" actually work (Zheng and myself).

  The rest is mostly mount option handling cleanups from Chengguang and
  assorted fixes from Zheng, Luis and Dongsheng.

* tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  rbd: flush rbd_dev->watch_dwork after watch is unregistered
  ceph: update description of some mount options
  ceph: show ino32 if the value is different with default
  ceph: strengthen rsize/wsize/readdir_max_bytes validation
  ceph: fix alignment of rasize
  ceph: fix use-after-free in ceph_statfs()
  ceph: prevent i_version from going back
  ceph: fix wrong check for the case of updating link count
  libceph: allocate the locator string with GFP_NOFAIL
  libceph: make abort_on_full a per-osdc setting
  libceph: don't abort reads in ceph_osdc_abort_on_full()
  libceph: avoid a use-after-free during map check
  libceph: don't warn if req->r_abort_on_full is set
  libceph: use for_each_request() in ceph_osdc_abort_on_full()
  libceph: defer __complete_request() to a workqueue
  libceph: move more code into __complete_request()
  libceph: no need to call flush_workqueue() before destruction
  ceph: flush pending works before shutdown super
  ceph: abort osd requests on force umount
  libceph: introduce ceph_osdc_abort_requests()
  ...
2018-06-15 07:24:58 +09:00
Kees Cook
6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Deepa Dinamani
95582b0083 vfs: change inode times to use struct timespec64
struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
  current_time ( ... )
  {
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
  ...
- return timespec_trunc(
+ return timespec64_trunc(
  ... );
  }

@ depends on patch @
identifier xtime;
@@
 struct \( iattr \| inode \| kstat \) {
 ...
-       struct timespec xtime;
+       struct timespec64 xtime;
 ...
 }

@ depends on patch @
identifier t;
@@
 struct inode_operations {
 ...
int (*update_time) (...,
-       struct timespec t,
+       struct timespec64 t,
...);
 ...
 }

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
 fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
 ...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
  ) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
 fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
|
 node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 stat->xtime = node2->i_xtime1;
|
 stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
 node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>
2018-06-05 16:57:31 -07:00
Chengguang Xu
3619aa8b74 ceph: show ino32 if the value is different with default
In current ceph_show_options(), there is no item for showing 'ino32',
so add showing mount option 'ino32' if the value is different with
default.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 20:46:02 +02:00