AMD chipsets often behave pretty badly regarding the DMA position
reporting. It results in the bad quality audio recording.
Using position_fix=3 works well in general for them, so let's enable
it as default for AMD.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Renamed to Digial SRC Capture Switch for more correct representation.
Also fixed analog volume control on Lola161611 and lola881.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For assuring the synchronized state with the pause operation,
loop over the all linked streams and waits until all get ready
in a loop.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the refcounting for the exclusive SRC control.
Also, fixed the possible stall after PCM pause operations.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added granularity and sample_rate_min module options.
The former controls the h/w access granularity. As default, it's set
to the max value 32.
The latter controls the minimum sample rate in Hz, as default 16000.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use a single BDL for both buffers instead of allocating for each.
Also a few tune-up to avoid the stream stalls in the PCM code and
the prelimianry work for SG-buffer support are added, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The codec proc file becomes a read only that shows the codec widgets
in a text form. A new proc file, codec_rw, is introduced instead for
accessing the Lola verb directly by reading and writing to it.
Also, regs proc file shows the contents of DSD, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a new driver for supporting Digigram Lola PCI-e boards.
Lola has a similar h/w design like HD-audio but with extended verbs.
Thus the driver is written similarly like HD-audio driver in the bus
part. The codec part is rather written in a fixed way specific to the
Lola board because of the verb incompatibility.
The driver provides basic PCM, supporting multi-streams and mixing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix NULL-dereference when try to use alt_playback since those codecs
which support multistreaming playback usually have more than 1 adc but
the driver should create alt_capture when spec->stream_analog_alt_capture
is also defined.
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check of chained fixup list entry was done against the wrong element.
A stupid mistake during refactoring.
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit c6b358748e19ce7e230b0926ac42696bc485a562.
It turned out that there are different pin configurations for this
PCI SSID, including multi-channel modes. And more proper fix for
allowing line-out mutes will come up in 2.6.40 tree, so we won't need
this fixup any more there.
Reported-by: Andrew Clayton <andrew@digital-domain.net>
Reported-by: Emmanuel Benisty <benisty.e@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI SSID is 1025:031c and the codec SSID is 1025:031d,
so the driver mistakes this for a SKU value, but looking at
the numbers, this is obviously wrong.
Cc: stable@kernel.org (2.6.38+)
BugLink: http://bugs.launchpad.net/bugs/761861
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PC Beep was not being reported as enabled on my EeePC 901:
SKU: enable_pcbeep=0x0
Signed-off-by: Daniel Cordero <danielcordero@lavabit.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Auto-Mute Mode control is useful even when only two outputs
(e.g. HP and speaker) are available. Then user can enable/disable
the auto-mute behavior on the fly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not only supporting the line-out automute as additional feature
to the existing headphone automute, now the headphone jack can
mute the line-out alone even without the speaker outs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By popular demands, I add the functionality to mute / unmute the
line-out jacks per the headphone plug / unplug. For achieving this
and keeping the compatibility with the old behavior, the new mixer
enum "Auto-Mute Mode" is added. With this, user can control the
auto-mute behavior either disabled, speaker-only or lineout+speaker.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yet another consolidation of auto-mute functions for the devices
controlling the output muts together with the master mixer switch,
typically found for ALC262 machines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the common helper function and flags to support the auto-mute
per line-out jack detection, and also the mute of line-out jacks.
A few model-specific implementations are replaced with the common
helpers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some models do mute on/off the connected mixer widget for the automatic
muting, instead of controlling the pin widget itself. This patch adds
the implementation of such type of auto-mute in the common helper
function, and reduces the redundant codes for each model preset.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two entry points for the headphone automute functions for
Realtek, alc_automute_amp() and alc_automute_pin(). These call the
same function in the end, so we can basically consolidate these
with a flag in spec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In notify_aa_path_ctls(), adds 'rear mic' item and confirms the A-A
path control existing before notifying card that the A-A path volume
is muted if smart5.1 is enabled.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allow application such as gstreamer and wine which use
snd_pcm_hw_params_set_buffer_time_near() won't fail any more
since sound chips require special containt power 2 period bytes
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support of "Channel Mode" enum control to Realtek
auto-parser. When line-in or mic-in jacks are capable to output and
free DACs are available, the driver allows to switch to multi-channel
mode via "Channel Mode" enum switch, as already implemented in some
preset cases.
Not implemented in all Realtek codecs. Currently, ALC880, 882, 861,
662 and the compatible codecs are supported.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allow alc662_dac_to_mix() and alc662_look_for_dac() to parse
down the selector widget that is found in ALC880-type codecs,
and rename them to alc_auto_*() accordingly.
This is for the next coming multi-io extensions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some motherboards with 5 or 6 audio jacks which had six or eight multiple
channels output, smart5.1 item is no useful and should be removed.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
