Recently multi-lower layer mount support allow upperdir and workdir
to be omitted, then cause overlayfs can be mount with only one
lowerdir directory. This action make no sense and have potential risk.
This patch check the total number of lower directories to prevent
mounting overlayfs with only one directory.
Also, an error message is added to indicate lower directories exceed
OVL_MAX_STACK limit.
Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Overlayfs should print an error message if an incorrect mount option
is caught like other filesystems.
After this patch, improper option input could be clearly known.
Reported-by: Fabian Sturm <fabian.sturm@aduu.de>
Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
It's possible that "fl" won't point at a valid lock at this point, so
use "victim" instead which is either a valid lock or NULL.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
With FAN_ONDIR set, the user can end up getting events, which it hasn't
marked. This was revealed with fanotify04 testcase failure on
Linux-4.0-rc1, and is a regression from 3.19, revealed with 66ba93c0d7
("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask").
# /opt/ltp/testcases/bin/fanotify04
[ ... ]
fanotify04 7 TPASS : event generated properly for type 100000
fanotify04 8 TFAIL : fanotify04.c:147: got unexpected event 30
fanotify04 9 TPASS : No event as expected
The testcase sets the adds the following marks : FAN_OPEN | FAN_ONDIR for
a fanotify on a dir. Then does an open(), followed by close() of the
directory and expects to see an event FAN_OPEN(0x20). However, the
fanotify returns (FAN_OPEN|FAN_CLOSE_NOWRITE(0x10)). This happens due to
the flaw in the check for event_mask in fanotify_should_send_event() which
does:
if (event_mask & marks_mask & ~marks_ignored_mask)
return true;
where, event_mask == (FAN_ONDIR | FAN_CLOSE_NOWRITE),
marks_mask == (FAN_ONDIR | FAN_OPEN),
marks_ignored_mask == 0
Fix this by masking the outgoing events to the user, as we already take
care of FAN_ONDIR and FAN_EVENT_ON_CHILD.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck
during recovery at mount time. The code path that caused the deadlock was
as follows:
nilfs_fill_super()
load_nilfs()
nilfs_salvage_orphan_logs()
* Do roll-forwarding, attach segment constructor for recovery,
and kick it.
nilfs_segctor_thread()
nilfs_segctor_thread_construct()
* A lock is held with nilfs_transaction_lock()
nilfs_segctor_do_construct()
nilfs_segctor_drop_written_files()
iput()
iput_final()
write_inode_now()
writeback_single_inode()
__writeback_single_inode()
do_writepages()
nilfs_writepage()
nilfs_construct_dsync_segment()
nilfs_transaction_lock() --> deadlock
This can happen if commit 7ef3ff2fea ("nilfs2: fix deadlock of segment
constructor over I_SYNC flag") is applied and roll-forward recovery was
performed at mount time. The roll-forward recovery can happen if datasync
write is done and the file system crashes immediately after that. For
instance, we can reproduce the issue with the following steps:
< nilfs2 is mounted on /nilfs (device: /dev/sdb1) >
# dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync
# dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k
count=1 && reboot -nfh
< the system will immediately reboot >
# mount -t nilfs2 /dev/sdb1 /nilfs
The deadlock occurs because iput() can run segment constructor through
writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags. The
above commit changed segment constructor so that it calls iput()
asynchronously for inodes with i_nlink == 0, but that change was
imperfect.
This fixes the another deadlock by deferring iput() in segment constructor
even for the case that mount is not finished, that is, for the case that
MS_ACTIVE flag is not set.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that making this feature ro_compat isn't quite enough to
prevent accidental corruption on mount from older kernels. Ocfs2 (like
other file systems) will process orphaned inodes even when the user mounts
in 'ro' mode. So for the case of a filesystem not knowing the append_dio
feature, mounting the filesystem could result in orphaned-for-dio files
being deleted, which we clearly don't want.
So instead, turn this into an incompat flag.
Btw, this is kind of my fault - initially I asked that we add a flag to
cover the feature and even suggested that we use an ro flag. It wasn't
until I was looking through our commits for v4.0-rc1 that I realized we
actually want this to be incompat.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull btrfs fixes from Chris Mason:
"Outside of misc fixes, Filipe has a few fsync corners and we're
pulling in one more of Josef's fixes from production use here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref.
Btrfs: fix data loss in the fast fsync path
Btrfs: remove extra run_delayed_refs in update_cowonly_root
Btrfs: incremental send, don't rename a directory too soon
btrfs: fix lost return value due to variable shadowing
Btrfs: do not ignore errors from btrfs_lookup_xattr in do_setxattr
Btrfs: fix off-by-one logic error in btrfs_realloc_node
Btrfs: add missing inode update when punching hole
Btrfs: abort the transaction if we fail to update the free space cache inode
Btrfs: fix fsync race leading to ordered extent memory leaks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ND3k
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.0-3' of git://git.samba.org/jlayton/linux
Pull file locking fix from Jeff Layton:
"Just a single patch to fix a memory leak that Daniel Wagner discovered
while doing some testing with leases"
* tag 'locks-v4.0-3' of git://git.samba.org/jlayton/linux:
locks: fix fasync_struct memory leak in lease upgrade/downgrade handling
Highlights include:
- Fix a regression in the NFSv4 open state recovery code
- Fix a regression in the NFSv4 close code
- Fix regressions and side-effects of the loop-back mounted NFS fixes
in 3.18, that cause the NFS read() syscall to return EBUSY.
- Fix regressions around the readdirplus code and how it interacts with
the VFS lazy unmount changes that went into v3.18.
- Fix issues with out-of-order RPC call replies replacing updated
attributes with stale ones (particularly after a truncate()).
- Fix an underflow checking issue with RPC/RDMA credits
- Fix a number of issues with the NFSv4 delegation return/free code.
- Fix issues around stale NFSv4.1 leases when doing a mount
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qMB7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Fix a regression in the NFSv4 open state recovery code
- Fix a regression in the NFSv4 close code
- Fix regressions and side-effects of the loop-back mounted NFS fixes
in 3.18, that cause the NFS read() syscall to return EBUSY.
- Fix regressions around the readdirplus code and how it interacts
with the VFS lazy unmount changes that went into v3.18.
- Fix issues with out-of-order RPC call replies replacing updated
attributes with stale ones (particularly after a truncate()).
- Fix an underflow checking issue with RPC/RDMA credits
- Fix a number of issues with the NFSv4 delegation return/free code.
- Fix issues around stale NFSv4.1 leases when doing a mount"
* tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4.1: Clear the old state by our client id before establishing a new lease
NFSv4: Fix a race in NFSv4.1 server trunking discovery
NFS: Don't write enable new pages while an invalidation is proceeding
NFS: Fix a regression in the read() syscall
NFSv4: Ensure we skip delegations that are already being returned
NFSv4: Pin the superblock while we're returning the delegation
NFSv4: Ensure we honour NFS_DELEGATION_RETURNING in nfs_inode_set_delegation()
NFSv4: Ensure that we don't reap a delegation that is being returned
NFS: Fix stateid used for NFS v4 closes
NFSv4: Don't call put_rpccred() under the rcu_read_lock()
NFS: Don't require a filehandle to refresh the inode in nfs_prime_dcache()
NFSv3: Use the readdir fileid as the mounted-on-fileid
NFS: Don't invalidate a submounted dentry in nfs_prime_dcache()
NFSv4: Set a barrier in the update_changeattr() helper
NFS: Fix nfs_post_op_update_inode() to set an attribute barrier
NFS: Remove size hack in nfs_inode_attrs_need_update()
NFSv4: Add attribute update barriers to delegreturn and pNFS layoutcommit
NFS: Add attribute update barriers to NFS writebacks
NFS: Set an attribute barrier on all updates
NFS: Add attribute update barriers to nfs_setattr_update_inode()
...
Improper arithmetics when calculting the address of the extended ref could
lead to an out of bounds memory read and kernel panic.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Chris Mason <clm@fb.com>
When using the fast file fsync code path we can miss the fact that new
writes happened since the last file fsync and therefore return without
waiting for the IO to finish and write the new extents to the fsync log.
Here's an example scenario where the fsync will miss the fact that new
file data exists that wasn't yet durably persisted:
1. fs_info->last_trans_committed == N - 1 and current transaction is
transaction N (fs_info->generation == N);
2. do a buffered write;
3. fsync our inode, this clears our inode's full sync flag, starts
an ordered extent and waits for it to complete - when it completes
at btrfs_finish_ordered_io(), the inode's last_trans is set to the
value N (via btrfs_update_inode_fallback -> btrfs_update_inode ->
btrfs_set_inode_last_trans);
4. transaction N is committed, so fs_info->last_trans_committed is now
set to the value N and fs_info->generation remains with the value N;
5. do another buffered write, when this happens btrfs_file_write_iter
sets our inode's last_trans to the value N + 1 (that is
fs_info->generation + 1 == N + 1);
6. transaction N + 1 is started and fs_info->generation now has the
value N + 1;
7. transaction N + 1 is committed, so fs_info->last_trans_committed
is set to the value N + 1;
8. fsync our inode - because it doesn't have the full sync flag set,
we only start the ordered extent, we don't wait for it to complete
(only in a later phase) therefore its last_trans field has the
value N + 1 set previously by btrfs_file_write_iter(), and so we
have:
inode->last_trans <= fs_info->last_trans_committed
(N + 1) (N + 1)
Which made us not log the last buffered write and exit the fsync
handler immediately, returning success (0) to user space and resulting
in data loss after a crash.
This can actually be triggered deterministically and the following excerpt
from a testcase I made for xfstests triggers the issue. It moves a dummy
file across directories and then fsyncs the old parent directory - this
is just to trigger a transaction commit, so moving files around isn't
directly related to the issue but it was chosen because running 'sync' for
example does more than just committing the current transaction, as it
flushes/waits for all file data to be persisted. The issue can also happen
at random periods, since the transaction kthread periodicaly commits the
current transaction (about every 30 seconds by default).
The body of the test is:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our main test file 'foo', the one we check for data loss.
# By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync'
# bit from its flags (btrfs inode specific flags).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \
-c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io
# Now create one other file and 2 directories. We will move this second file
# from one directory to the other later because it forces btrfs to commit its
# currently open transaction if we fsync the old parent directory. This is
# necessary to trigger the data loss bug that affected btrfs.
mkdir $SCRATCH_MNT/testdir_1
touch $SCRATCH_MNT/testdir_1/bar
mkdir $SCRATCH_MNT/testdir_2
# Make sure everything is durably persisted.
sync
# Write more 8Kb of data to our file.
$XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io
# Move our 'bar' file into a new directory.
mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar
# Fsync our first directory. Because it had a file moved into some other
# directory, this made btrfs commit the currently open transaction. This is
# a condition necessary to trigger the data loss bug.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1
# Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of
# data we wrote previously to be persisted and available if a crash happens.
# This did not happen with btrfs, because of the transaction commit that
# happened when we fsynced the parent directory.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now check that all data we wrote before are available.
echo "File content after log replay:"
od -t x1 $SCRATCH_MNT/foo
status=0
exit
The expected golden output for the test, which is what we get with this
fix applied (or when running against ext3/4 and xfs), is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 8192/8192 bytes at offset 8192
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0040000
Without this fix applied, the output shows the test file does not have
the second 8Kb extent that we successfully fsynced:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 8192/8192 bytes at offset 8192
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
So fix this by skipping the fsync only if we're doing a full sync and
if the inode's last_trans is <= fs_info->last_trans_committed, or if
the inode is already in the log. Also remove setting the inode's
last_trans in btrfs_file_write_iter since it's useless/unreliable.
Also because btrfs_file_write_iter no longer sets inode->last_trans to
fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't
bail out if last_trans is 0, otherwise something as simple as the following
example wouldn't log the second write on the last fsync:
1. write to file
2. fsync file
3. fsync file
|--> btrfs_inode_in_log() returns true and it set last_trans to 0
4. write to file
|--> btrfs_file_write_iter() no longers sets last_trans, so it
remained with a value of 0
5. fsync
|--> inode->last_trans == 0, so it bails out without logging the
second write
A test case for xfstests will be sent soon.
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 8634b51f6c (locks: convert lease handling to file_lock_context)
introduced a regression in the handling of lease upgrade/downgrades.
In the event that we already have a lease on a file and are going to
either upgrade or downgrade it, we skip doing any list insertion or
deletion and simply re-call lm_setup on the existing lease.
As of commit 8634b51f6c however, we end up calling lm_setup on the
lease that was passed in, instead of on the existing lease. This causes
us to leak the fasync_struct that was allocated in the event that there
was not already an existing one (as it always appeared that there
wasn't one).
Fixes: 8634b51f6c (locks: convert lease handling to file_lock_context)
Reported-and-Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
- The eCryptfs ioctl handling functions should only pass known-good ioctl
commands to the lower filesystem
- A static checker found a potential buffer overflow. Upon inspection, it is
not triggerable due to input validation performed on the mount parameters.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4fdp
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-4.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Fixes for proper ioctl handling and an untriggerable buffer overflow
- The eCryptfs ioctl handling functions should only pass known-good
ioctl commands to the lower filesystem
- A static checker found a potential buffer overflow. Upon
inspection, it is not triggerable due to input validation performed
on the mount parameters"
* tag 'ecryptfs-4.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: don't pass fs-specific ioctl commands through
eCryptfs: ensure copy to crypt_stat->cipher does not overrun
If the call to exchange-id returns with the EXCHGID4_FLAG_CONFIRMED_R flag
set, then that means our lease was established by a previous mount instance.
Ensure that we detect this situation, and that we clear the state held by
that mount.
Reported-by: Jorge Mora <Jorge.Mora@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do not want to allow a race with another NFS mount to cause
nfs41_walk_client_list() to establish a lease on our nfs_client before
we're done checking for trunking.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull nfsd fixes from Bruce Fields:
"Three miscellaneous bugfixes, most importantly the clp->cl_revoked
bug, which we've seen several reports of people hitting"
* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
sunrpc: integer underflow in rsc_parse()
nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
svcrpc: fix memory leak in gssp_accept_sec_context_upcall
nfs_vm_page_mkwrite() should wait until the page cache invalidation
is finished. This is the second patch in a 2 patch series to deprecate
the NFS client's reliance on nfs_release_page() in the context of
nfs_invalidate_mapping().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When invalidating the page cache for a regular file, we want to first
sync all dirty data to disk and then call invalidate_inode_pages2().
The latter relies on nfs_launder_page() and nfs_release_page() to deal
respectively with dirty pages, and unstable written pages.
When commit 9590544694 ("NFS: avoid deadlocks with loop-back mounted
NFS filesystems.") changed the behaviour of nfs_release_page(), then it
made it possible for invalidate_inode_pages2() to fail with an EBUSY.
Unfortunately, that error is then propagated back to read().
Let's therefore work around the problem for now by protecting the call
to sync the data and invalidate_inode_pages2() so that they are atomic
w.r.t. the addition of new writes.
Later on, we can revisit whether or not we still need nfs_launder_page()
and nfs_release_page().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
eCryptfs can't be aware of what to expect when after passing an
arbitrary ioctl command through to the lower filesystem. The ioctl
command may trigger an action in the lower filesystem that is
incompatible with eCryptfs.
One specific example is when one attempts to use the Btrfs clone
ioctl command when the source file is in the Btrfs filesystem that
eCryptfs is mounted on top of and the destination fd is from a new file
created in the eCryptfs mount. The ioctl syscall incorrectly returns
success because the command is passed down to Btrfs which thinks that it
was able to do the clone operation. However, the result is an empty
eCryptfs file.
This patch allows the trim, {g,s}etflags, and {g,s}etversion ioctl
commands through and then copies up the inode metadata from the lower
inode to the eCryptfs inode to catch any changes made to the lower
inode's metadata. Those five ioctl commands are mostly common across all
filesystems but the whitelist may need to be further pruned in the
future.
https://bugzilla.kernel.org/show_bug.cgi?id=93691https://launchpad.net/bugs/1305335
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Rocko <rockorequin@hotmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: stable@vger.kernel.org # v2.6.36+: c43f7b8 eCryptfs: Handle ioctl calls with unlocked and compat functions
In nfs_client_return_marked_delegations() and nfs_delegation_reap_unclaimed()
we want to optimise the loop traversal by skipping delegations that are
already in the process of being returned.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch ensures that the superblock doesn't go ahead and disappear
underneath us while the state manager thread is returning delegations.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that nfs_inode_set_delegation() doesn't inadvertently detach a
delegation that is already in the process of being returned.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
After 566fcec60 the client uses the "current stateid" from the
nfs4_state structure to close a file. This could potentially contain a
delegation stateid, which is disallowed by the protocol and causes
servers to return NFS4ERR_BAD_STATEID. This patch restores the
(correct) behavior of sending the open stateid to close a file.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 566fcec60 (NFSv4: Fix an atomicity problem in CLOSE)
Signed-off-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There's one more case where we can't issue a rename operation for a
directory as soon as we process it. We used to delay directory renames
only if they have some ancestor directory with a higher inode number
that got renamed too, but there's another case where we need to delay
the rename too - when a directory A is renamed to the old name of a
directory B but that directory B has its rename delayed because it
has now (in the send root) an ancestor with a higher inode number that
was renamed. If we don't delay the directory rename in this case, the
receiving end of the send stream will attempt to rename A to the old
name of B before B got renamed to its new name, which results in a
"directory not empty" error. So fix this by delaying directory renames
for this case too.
Steps to reproduce:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/a
$ mkdir /mnt/b
$ mkdir /mnt/c
$ touch /mnt/a/file
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/c /mnt/x
$ mv /mnt/a /mnt/x/y
$ mv /mnt/b /mnt/a
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 -f /tmp/1.send
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.send
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ btrfs receive /mnt2 -f /tmp/1.send
$ btrfs receive /mnt2 -f /tmp/2.send
ERROR: rename b -> a failed. Directory not empty
A test case for xfstests follows soon.
Reported-by: Ames Cornish <ames@cornishes.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
A block-local variable stores error code but btrfs_get_blocks_direct may
not return it in the end as there's a ret defined in the function scope.
CC: <stable@vger.kernel.org> # 3.6+
Fixes: d187663ef2 ("Btrfs: lock extents as we map them in DIO")
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The return value from btrfs_lookup_xattr() can be a pointer encoding an
error, therefore deal with it. This fixes commit 5f5bc6b1e2
("Btrfs: make xattr replace operations atomic").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The end_slot variable actually matches the number of pointers in the
node and not the last slot (which is 'nritems - 1'). Therefore in order
to check that the current slot in the for loop doesn't match the last
one, the correct logic is to check if 'i' is less than 'end_slot - 1'
and not 'end_slot - 2'.
Fix this and set end_slot to be 'nritems - 1', as it's less confusing
since the variable name implies it's inclusive rather then exclusive.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When punching a file hole if we endup only zeroing parts of a page,
because the start offset isn't a multiple of the sector size or the
start offset and length fall within the same page, we were not updating
the inode item. This prevented an fsync from doing anything, if no other
file changes happened in the current transaction, because the fields
in btrfs_inode used to check if the inode needs to be fsync'ed weren't
updated.
This issue is easy to reproduce and the following excerpt from the
xfstest case I made shows how to trigger it:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file.
$XFS_IO_PROG -f -c "pwrite -S 0x22 -b 16K 0 16K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Fsync the file, this makes btrfs update some btrfs inode specific fields
# that are used to track if the inode needs to be written/updated to the fsync
# log or not. After this fsync, the new values for those fields indicate that
# a subsequent fsync does not need to touch the fsync log.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Force a commit of the current transaction. After this point, any operation
# that modifies the data or metadata of our file, should update those fields in
# the btrfs inode with values that make the next fsync operation write to the
# fsync log.
sync
# Punch a hole in our file. This small range affects only 1 page.
# This made the btrfs hole punching implementation write only some zeroes in
# one page, but it did not update the btrfs inode fields used to determine if
# the next fsync needs to write to the fsync log.
$XFS_IO_PROG -c "fpunch 8000 4K" $SCRATCH_MNT/foo
# Another variation of the previously mentioned case.
$XFS_IO_PROG -c "fpunch 15000 100" $SCRATCH_MNT/foo
# Now fsync the file. This was a no-operation because the previous hole punch
# operation didn't update the inode's fields mentioned before, so they remained
# with the values they had after the first fsync - that is, they indicate that
# it is not needed to write to fsync log.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
echo "File content before:"
od -t x1 $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Enable writes and mount the fs. This makes the fsync log replay code run.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Because the last fsync didn't do anything, here the file content matched what
# it was after the first fsync, before the holes were punched, and not what it
# was after the holes were punched.
echo "File content after:"
od -t x1 $SCRATCH_MNT/foo
This issue has been around since 2012, when the punch hole implementation
was added, commit 2aaa665581 ("Btrfs: add hole punching").
A test case for xfstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Our gluster boxes were hitting a problem where they'd run out of space when
updating the block group cache and therefore wouldn't be able to update the free
space inode. This is a problem because this is how we invalidate the cache and
protect ourselves from errors further down the stack, so if this fails we have
to abort the transaction so we make sure we don't end up with stale free space
cache. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can have multiple fsync operations against the same file during the
same transaction and they can collect the same ordered extents while they
don't complete (still accessible from the inode's ordered tree). If this
happens, those ordered extents will never get their reference counts
decremented to 0, leading to memory leaks and inode leaks (an iput for an
ordered extent's inode is scheduled only when the ordered extent's refcount
drops to 0). The following sequence diagram explains this race:
CPU 1 CPU 2
btrfs_sync_file()
btrfs_sync_file()
mutex_lock(inode->i_mutex)
btrfs_log_inode()
btrfs_get_logged_extents()
--> collects ordered extent X
--> increments ordered
extent X's refcount
btrfs_submit_logged_extents()
mutex_unlock(inode->i_mutex)
mutex_lock(inode->i_mutex)
btrfs_sync_log()
btrfs_wait_logged_extents()
--> list_del_init(&ordered->log_list)
btrfs_log_inode()
btrfs_get_logged_extents()
--> Adds ordered extent X
to logged_list because
at this point:
list_empty(&ordered->log_list)
&& test_bit(BTRFS_ORDERED_LOGGED,
&ordered->flags) == 0
--> Increments ordered extent
X's refcount
--> check if ordered extent's io is
finished or not, start it if
necessary and wait for it to finish
--> sets bit BTRFS_ORDERED_LOGGED
on ordered extent X's flags
and adds it to trans->ordered
btrfs_sync_log() finishes
btrfs_submit_logged_extents()
btrfs_log_inode() finishes
mutex_unlock(inode->i_mutex)
btrfs_sync_file() finishes
btrfs_sync_log()
btrfs_wait_logged_extents()
--> Sees ordered extent X has the
bit BTRFS_ORDERED_LOGGED set in
its flags
--> X's refcount is untouched
btrfs_sync_log() finishes
btrfs_sync_file() finishes
btrfs_commit_transaction()
--> called by transaction kthread for e.g.
btrfs_wait_pending_ordered()
--> waits for ordered extent X to
complete
--> decrements ordered extent X's
refcount by 1 only, corresponding
to the increment done by the fsync
task ran by CPU 1
In the scenario of the above diagram, after the transaction commit,
the ordered extent will remain with a refcount of 1 forever, leaking
the ordered extent structure and preventing the i_count of its inode
from ever decreasing to 0, since the delayed iput is scheduled only
when the ordered extent's refcount drops to 0, preventing the inode
from ever being evicted by the VFS.
Fix this by using the flag BTRFS_ORDERED_LOGGED differently. Use it to
mean that an ordered extent is already being processed by an fsync call,
which will attach it to the current transaction, preventing it from being
collected by subsequent fsync operations against the same inode.
This race was introduced with the following change (added in 3.19 and
backported to stable 3.18 and 3.17):
Btrfs: make sure logged extents complete in the current transaction V3
commit 50d9aa99bd
I ran into this issue while running xfstests/generic/113 in a loop, which
failed about 1 out of 10 runs with the following warning in dmesg:
[ 2612.440038] WARNING: CPU: 4 PID: 22057 at fs/btrfs/disk-io.c:3558 free_fs_root+0x36/0x133 [btrfs]()
[ 2612.442810] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop processor parport_pc parport psmouse therma
l_sys i2c_piix4 serio_raw pcspkr evdev microcode button i2c_core ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic virtio_pci ata_piix virtio_ring libata virtio flo
ppy e1000 scsi_mod [last unloaded: btrfs]
[ 2612.452711] CPU: 4 PID: 22057 Comm: umount Tainted: G W 3.19.0-rc5-btrfs-next-4+ #1
[ 2612.454921] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[ 2612.457709] 0000000000000009 ffff8801342c3c78 ffffffff8142425e ffff88023ec8f2d8
[ 2612.459829] 0000000000000000 ffff8801342c3cb8 ffffffff81045308 ffff880046460000
[ 2612.461564] ffffffffa036da56 ffff88003d07b000 ffff880046460000 ffff880046460068
[ 2612.463163] Call Trace:
[ 2612.463719] [<ffffffff8142425e>] dump_stack+0x4c/0x65
[ 2612.464789] [<ffffffff81045308>] warn_slowpath_common+0xa1/0xbb
[ 2612.466026] [<ffffffffa036da56>] ? free_fs_root+0x36/0x133 [btrfs]
[ 2612.467247] [<ffffffff810453c5>] warn_slowpath_null+0x1a/0x1c
[ 2612.468416] [<ffffffffa036da56>] free_fs_root+0x36/0x133 [btrfs]
[ 2612.469625] [<ffffffffa036f2a7>] btrfs_drop_and_free_fs_root+0x93/0x9b [btrfs]
[ 2612.471251] [<ffffffffa036f353>] btrfs_free_fs_roots+0xa4/0xd6 [btrfs]
[ 2612.472536] [<ffffffff8142612e>] ? wait_for_completion+0x24/0x26
[ 2612.473742] [<ffffffffa0370bbc>] close_ctree+0x1f3/0x33c [btrfs]
[ 2612.475477] [<ffffffff81059d1d>] ? destroy_workqueue+0x148/0x1ba
[ 2612.476695] [<ffffffffa034e3da>] btrfs_put_super+0x19/0x1b [btrfs]
[ 2612.477911] [<ffffffff81153e53>] generic_shutdown_super+0x73/0xef
[ 2612.479106] [<ffffffff811540e2>] kill_anon_super+0x13/0x1e
[ 2612.480226] [<ffffffffa034e1e3>] btrfs_kill_super+0x17/0x23 [btrfs]
[ 2612.481471] [<ffffffff81154307>] deactivate_locked_super+0x3b/0x50
[ 2612.482686] [<ffffffff811547a7>] deactivate_super+0x3f/0x43
[ 2612.483791] [<ffffffff8116b3ed>] cleanup_mnt+0x59/0x78
[ 2612.484842] [<ffffffff8116b44c>] __cleanup_mnt+0x12/0x14
[ 2612.485900] [<ffffffff8105d019>] task_work_run+0x8f/0xbc
[ 2612.486960] [<ffffffff810028d8>] do_notify_resume+0x5a/0x6b
[ 2612.488083] [<ffffffff81236e5b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 2612.489333] [<ffffffff8142a17f>] int_signal+0x12/0x17
[ 2612.490353] ---[ end trace 54a960a6bdcb8d93 ]---
[ 2612.557253] VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds. Have a nice day...
Kmemleak confirmed the ordered extent leak (and btrfs inode specific
structures such as delayed nodes):
$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff880154290db0 (size 576):
comm "btrfsck", pid 21980, jiffies 4295542503 (age 1273.412s)
hex dump (first 32 bytes):
01 40 00 00 01 00 00 00 b0 1d f1 4e 01 88 ff ff .@.........N....
00 00 00 00 00 00 00 00 c8 0d 29 54 01 88 ff ff ..........)T....
backtrace:
[<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a
[<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83
[<ffffffff8122fb26>] __radix_tree_create+0x109/0x190
[<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac
[<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs]
[<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs]
[<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs]
[<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs]
[<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs]
[<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed
[<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa
[<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b
[<ffffffff81429e92>] system_call_fastpath+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff88014ef11db0 (size 576):
comm "rm", pid 22009, jiffies 4295542593 (age 1273.052s)
hex dump (first 32 bytes):
02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 c8 1d f1 4e 01 88 ff ff ...........N....
backtrace:
[<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a
[<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83
[<ffffffff8122fb26>] __radix_tree_create+0x109/0x190
[<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac
[<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs]
[<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs]
[<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs]
[<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs]
[<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs]
[<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed
[<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa
[<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b
[<ffffffff81429e92>] system_call_fastpath+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff8800336feda8 (size 584):
comm "aio-stress", pid 22031, jiffies 4295543006 (age 1271.400s)
hex dump (first 32 bytes):
00 40 3e 00 00 00 00 00 00 00 8f 42 00 00 00 00 .@>........B....
00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 ................
backtrace:
[<ffffffff8114eb34>] create_object+0x172/0x29a
[<ffffffff8141d790>] kmemleak_alloc+0x25/0x41
[<ffffffff81141ae6>] kmemleak_alloc_recursive.constprop.52+0x16/0x18
[<ffffffff81145288>] kmem_cache_alloc+0xf7/0x198
[<ffffffffa0389243>] __btrfs_add_ordered_extent+0x43/0x309 [btrfs]
[<ffffffffa038968b>] btrfs_add_ordered_extent_dio+0x12/0x14 [btrfs]
[<ffffffffa03810e2>] btrfs_get_blocks_direct+0x3ef/0x571 [btrfs]
[<ffffffff81181349>] do_blockdev_direct_IO+0x62a/0xb47
[<ffffffff8118189a>] __blockdev_direct_IO+0x34/0x36
[<ffffffffa03776e5>] btrfs_direct_IO+0x16a/0x1e8 [btrfs]
[<ffffffff81100373>] generic_file_direct_write+0xb8/0x12d
[<ffffffffa038615c>] btrfs_file_write_iter+0x24b/0x42f [btrfs]
[<ffffffff8118bb0d>] aio_run_iocb+0x2b7/0x32e
[<ffffffff8118c99a>] do_io_submit+0x26e/0x2ff
[<ffffffff8118ca3b>] SyS_io_submit+0x10/0x12
[<ffffffff81429e92>] system_call_fastpath+0x12/0x17
CC: <stable@vger.kernel.org> # 3.19, 3.18 and 3.17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the server does not return a valid set of attributes that we can
use to either create a file or refresh the inode, then there is no
value in calling nfs_prime_dcache().
However if we're just refreshing the inode using the attributes that
the server returned, then it shouldn't matter whether or not we have
a filehandle, as long as we check the fsid+fileid combination.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we call readdirplus, set the fileid normally returned by readdir
as the mounted-on-fileid, since that is commonly the case if there is
a mountpoint. To ensure that we get it right, we only set the flag if
the readdir fileid differs from the one returned in the readdirplus
attributes.
This again means that we can avoid the issues described in commit
2ef47eb1ae ("NFS: Fix use of nfs_attr_use_mounted_on_fileid()"),
which only fixed NFSv4.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we're traversing a directory which contains a submounted filesystem,
or one that has a referral, the NFS server that is processing the READDIR
request will often return information for the underlying (mounted-on)
directory. It may, or may not, also return filehandle information.
If this happens, and the lookup in nfs_prime_dcache() returns the
dentry for the submounted directory, the filehandle comparison will
fail, and we call d_invalidate(). Post-commit 8ed936b567
("vfs: Lazily remove mounts on unlinked files and directories."), this
means the entire subtree is unmounted.
The following minimal patch addresses this problem by punting on
the invalidation if there is a submount.
Kudos to Neil Brown <neilb@suse.de> for having tracked down this
issue (see link).
Reported-by: Nix <nix@esperi.org.uk>
Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nix
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that we don't regress the changes that were made to the
directory.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
nfs_post_op_update_inode() is called after a self-induced attribute
update. Ensure that it also sets the barrier.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Prior to this patch, we used to always OK attribute updates that extended
the file size on the assumption that we might be performing writeback.
Now that we have attribute barriers to protect the writeback related updates,
we should remove this hack, as it can cause truncate() operations to
apparently be reverted if/when a readahead or getattr RPC call races
with our on-the-wire SETATTR.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that other operations that race with delegreturn and layoutcommit
cannot revert the attribute updates that were made on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that other operations that race with our write RPC calls
cannot revert the file size updates that were made on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that we update the attribute barrier even if there were no
invalidations, provided that this value is newer than the old one.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that other operations which raced with our setattr RPC call
cannot revert the file attribute changes that were made on the server.
To do so, we artificially bump the attribute generation counter on
the inode so that all calls to nfs_fattr_init() that precede ours
will be dropped.
The motivation for the patch came from Chuck Lever's reports of readaheads
racing with truncate operations and causing the file size to be reverted.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
The O_DIRECT code will grab the inode->i_mutex and flush out buffered
writes, before scheduling a read or a write. However there is no
equivalent in the buffered write code to wait for O_DIRECT to complete.
Fixes a reported issue in xfstests generic/133, when first performing an
O_DIRECT write followed by a buffered write.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
This update contains:
o ensure quota type is reset in on-disk dquots
o fix missing partial EOF block data flush on truncate extension
o fix transaction leak in error handling for new pnfs block layout
support
o add missing target_ip check to RENAME_EXCHANGE
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=kTai
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"These are fixes for regressions/bugs introduced in the 4.0 merge cycle
and problems discovered during the merge window that need to be pushed
back to stable kernels ASAP.
This contains:
- ensure quota type is reset in on-disk dquots
- fix missing partial EOF block data flush on truncate extension
- fix transaction leak in error handling for new pnfs block layout
support
- add missing target_ip check to RENAME_EXCHANGE"
* tag 'xfs-for-linus-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: cancel failed transaction in xfs_fs_commit_blocks()
xfs: Ensure we have target_ip for RENAME_EXCHANGE
xfs: ensure truncate forces zeroed blocks to disk
xfs: Fix quota type in quota structures when reusing quota file
Each inode of nilfs2 stores a root node of a b-tree, and it turned out to
have a memory overrun issue:
Each b-tree node of nilfs2 stores a set of key-value pairs and the number
of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as
a few other "bn_*" members.
Since the value of "bn_nchildren" is used for operations on the key-values
within the b-tree node, it can cause memory access overrun if a large
number is incorrectly set to "bn_nchildren".
For instance, nilfs_btree_node_lookup() function determines the range of
binary search with it, and too large "bn_nchildren" leads
nilfs_btree_node_get_key() in that function to overrun.
As for intermediate b-tree nodes, this is prevented by a sanity check
performed when each node is read from a drive, however, no sanity check
has been done for root nodes stored in inodes.
This patch fixes the issue by adding missing sanity check against b-tree
root nodes so that it's called when on-memory inodes are read from ifile,
inode metadata file.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The share access mode is now specified as an argument in the nfs4_opendata,
and so nfs4_open_recover_helper() needs to call nfs4_map_atomic_open_share()
in order to set it.
Fixes: 6ae373394c ("NFSv4.1: Ask for no delegation on OPEN if using O_DIRECT")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
commit 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is
protected by clp->cl_lock") removed the use of the reaplist to
clean out clp->cl_revoked. It failed to change list_entry() to
walk clp->cl_revoked.next instead of reaplist.next
Fixes: 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock")
Cc: stable@vger.kernel.org
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull btrfs fix from Chris Mason:
"I'm still testing more fixes, but I wanted to get out the fix for the
btrfs raid5/6 memory corruption I mentioned in my merge window pull"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix allocation size calculations in alloc_btrfs_bio
