Pull networking updates from David Miller:
"Most notable changes in here:
1) By far the biggest accomplishment, thanks to a large range of
contributors, is the addition of multi-send for transmit. This is
the result of discussions back in Chicago, and the hard work of
several individuals.
Now, when the ->ndo_start_xmit() method of a driver sees
skb->xmit_more as true, it can choose to defer the doorbell
telling the driver to start processing the new TX queue entires.
skb->xmit_more means that the generic networking is guaranteed to
call the driver immediately with another SKB to send.
There is logic added to the qdisc layer to dequeue multiple
packets at a time, and the handling mis-predicted offloads in
software is now done with no locks held.
Finally, pktgen is extended to have a "burst" parameter that can
be used to test a multi-send implementation.
Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
virtio_net
Adding support is almost trivial, so export more drivers to
support this optimization soon.
I want to thank, in no particular or implied order, Jesper
Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
David Tat, Hannes Frederic Sowa, and Rusty Russell.
2) PTP and timestamping support in bnx2x, from Michal Kalderon.
3) Allow adjusting the rx_copybreak threshold for a driver via
ethtool, and add rx_copybreak support to enic driver. From
Govindarajulu Varadarajan.
4) Significant enhancements to the generic PHY layer and the bcm7xxx
driver in particular (EEE support, auto power down, etc.) from
Florian Fainelli.
5) Allow raw buffers to be used for flow dissection, allowing drivers
to determine the optimal "linear pull" size for devices that DMA
into pools of pages. The objective is to get exactly the
necessary amount of headers into the linear SKB area pre-pulled,
but no more. The new interface drivers use is eth_get_headlen().
From WANG Cong, with driver conversions (several had their own
by-hand duplicated implementations) by Alexander Duyck and Eric
Dumazet.
6) Support checksumming more smoothly and efficiently for
encapsulations, and add "foo over UDP" facility. From Tom
Herbert.
7) Add Broadcom SF2 switch driver to DSA layer, from Florian
Fainelli.
8) eBPF now can load programs via a system call and has an extensive
testsuite. Alexei Starovoitov and Daniel Borkmann.
9) Major overhaul of the packet scheduler to use RCU in several major
areas such as the classifiers and rate estimators. From John
Fastabend.
10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
Duyck.
11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
Dumazet.
12) Add Datacenter TCP congestion control algorithm support, From
Florian Westphal.
13) Reorganize sk_buff so that __copy_skb_header() is significantly
faster. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
netlabel: directly return netlbl_unlabel_genl_init()
net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
net: description of dma_cookie cause make xmldocs warning
cxgb4: clean up a type issue
cxgb4: potential shift wrapping bug
i40e: skb->xmit_more support
net: fs_enet: Add NAPI TX
net: fs_enet: Remove non NAPI RX
r8169:add support for RTL8168EP
net_sched: copy exts->type in tcf_exts_change()
wimax: convert printk to pr_foo()
af_unix: remove 0 assignment on static
ipv6: Do not warn for informational ICMP messages, regardless of type.
Update Intel Ethernet Driver maintainers list
bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
tipc: fix bug in multicast congestion handling
net: better IFF_XMIT_DST_RELEASE support
net/mlx4_en: remove NETDEV_TX_BUSY
3c59x: fix bad split of cpu_to_le32(pci_map_single())
net: bcmgenet: fix Tx ring priority programming
...
These are changes for drivers that are intimately tied to some SoC
and for some reason could not get merged through the respective
subsystem maintainer tree.
Most of the new code is for the Keystone Navigator driver, which is
new base support that is going to be needed for their hardware
accelerated network driver and other units.
Most of the commits are for moving old code around from at91 and omap
for things that are done in device drivers nowadays.
- at91: move reset, poweroff, memory and clocksource code into drivers
directories
- socfpga: add edac driver (through arm-soc, as requested by Boris)
- omap: move omap-intc code to drivers/irqchip
- sunxi: added an RTC driver for sun6i
- omap: mailbox driver related changes
- keystone: support for the "Navigator" component
- versatile: new reboot, led and soc drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=POJD
-----END PGP SIGNATURE-----
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are changes for drivers that are intimately tied to some SoC and
for some reason could not get merged through the respective subsystem
maintainer tree.
Most of the new code is for the Keystone Navigator driver, which is
new base support that is going to be needed for their hardware
accelerated network driver and other units.
Most of the commits are for moving old code around from at91 and omap
for things that are done in device drivers nowadays.
- at91: move reset, poweroff, memory and clocksource code into
drivers directories
- socfpga: add edac driver (through arm-soc, as requested by Boris)
- omap: move omap-intc code to drivers/irqchip
- sunxi: added an RTC driver for sun6i
- omap: mailbox driver related changes
- keystone: support for the "Navigator" component
- versatile: new reboot, led and soc drivers"
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
bus: arm-ccn: Fix spurious warning message
leds: add device tree bindings for register bit LEDs
soc: add driver for the ARM RealView
power: reset: driver for the Versatile syscon reboot
leds: add a driver for syscon-based LEDs
drivers/soc: ti: fix build break with modules
MAINTAINERS: Add Keystone Multicore Navigator drivers entry
soc: ti: add Keystone Navigator DMA support
Documentation: dt: soc: add Keystone Navigator DMA bindings
soc: ti: add Keystone Navigator QMSS driver
Documentation: dt: soc: add Keystone Navigator QMSS bindings
rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
rtc: sun6i: Add sun6i RTC driver
irqchip: omap-intc: remove unnecessary comments
irqchip: omap-intc: correct maximum number or MIR registers
irqchip: omap-intc: enable TURBO idle mode
irqchip: omap-intc: enable IP protection
irqchip: omap-intc: remove unnecesary of_address_to_resource() call
irqchip: omap-intc: comment style cleanup
irqchip: omap-intc: minor improvement to omap_irq_pending()
...
As usual, this is the largest branch, though this time a little under
half of the total changes with 307 individual non-merge changesets.
The largest changes are the addition of new machines, in particular
the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
for the old i.MX1 platform.
Other changes include
- at91: various sam9 and sama5 updates
- exynos: much extended Peach Pi/Pit (Chromebook 2) support
- keystone: new peripherals
- meson: added DT for meson6 SoC
- mvebu: new device support for Armada 370/375
- qcom: improved support for IPQ8064 and MSM8x60
- rockchip: much improved support for rk3288
- shmobile: lots of updates all over the place
- sunxi: dts license change
- sunxi: more a23 device support
- vexpress: CLCD DT description
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=2Sq1
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, this is the largest branch, though this time a little under
half of the total changes with 307 individual non-merge changesets.
The largest changes are the addition of new machines, in particular
the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
for the old i.MX1 platform.
Other changes include
- at91: various sam9 and sama5 updates
- exynos: much extended Peach Pi/Pit (Chromebook 2) support
- keystone: new peripherals
- meson: added DT for meson6 SoC
- mvebu: new device support for Armada 370/375
- qcom: improved support for IPQ8064 and MSM8x60
- rockchip: much improved support for rk3288
- shmobile: lots of updates all over the place
- sunxi: dts license change
- sunxi: more a23 device support
- vexpress: CLCD DT description"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits)
ARM: DTS: meson: update DTSI to add watchdog node
ARM: dts: keystone-k2l: fix mdio io start address
ARM: dts: keystone-k2e: fix mdio io start address
ARM: dts: keystone-k2e: update usb1 node for dma properties
ARM: dts: keystone: fix io range for usb_phy0
Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
Revert "ARM: dts: hix5hd2: add wdg node"
ARM: dts: add rk3288 i2s controller
ARM: vexpress: Add CLCD Device Tree properties
ARM: bcm2835: add I2S pinctrl to device tree
ARM: meson: documentation: add bindings documentation
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
ARM: dts: mt6589: Change compatible string for GIC
ARM: dts: mediatek: Add compatible property for aquaris5
ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
ARM: dts: mt6589: Fix typo in GIC unit address
ARM: dts: Build dtb for Mediatek board
ARM: dts: keystone: fix bindings for pcie and usb clock nodes
ARM: dts: keystone: k2l: Fix chip selects for SPI devices
ARM: dts: keystone: add dsp gpio controllers nodes
...
New and updated SoC support. Among the things new for this release are:
- at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3
- bcm: Added support for BCM63XX family of DSL SoCs
- hisi: Added support for HiP04 server-class SoC
- meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
- shmobile: added support for new r8a7794 (R-Car E2) automotive SoC
Noteworthy changes to existing SoC support are:
- imx: convert i.MX1 to device tree
- omap: lots of power management work
- omap: base support to enable moving to standard UART driver
- shmobile: lots of progress for multiplatform support, still ongoing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ZHtj
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Arnd Bergmann:
"New and updated SoC support. Among the things new for this release
are:
- at91: Added support for the new SAMA5D4 SoC, following the earlier
SAMA5D3
- bcm: Added support for BCM63XX family of DSL SoCs
- hisi: Added support for HiP04 server-class SoC
- meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
- shmobile: added support for new r8a7794 (R-Car E2) automotive SoC
Noteworthy changes to existing SoC support are:
- imx: convert i.MX1 to device tree
- omap: lots of power management work
- omap: base support to enable moving to standard UART driver
- shmobile: lots of progress for multiplatform support, still
ongoing"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
ARM: hisi: depend on ARCH_MULTI_V7
CNS3xxx: Fix debug UART.
ARM: at91: fix nommu build regression
ARM: meson: add basic support for MesonX SoCs
ARM: meson: debug: add debug UART for earlyprintk support
irq: Export handle_fasteoi_irq
ARM: mediatek: Add earlyprintk support for mt6589
ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
ARM: debug: fix alphanumerical order on debug uarts
ARM: at91: document Atmel SMART compatibles
ARM: at91: add sama5d4 support to sama5_defconfig
ARM: at91: dt: add device tree file for SAMA5D4ek board
ARM: at91: dt: add device tree file for SAMA5D4 SoC
ARM: at91: SAMA5D4 SoC detection code and low level routines
ARM: at91: introduce basic SAMA5D4 support
clk: at91: add a driver for the h32mx clock
ARM: pxa3xx: provide specific platform_devices for all ssp ports
ARM: pxa: ssp: provide platform_device_id for PXA3xx
ARM: OMAP4+: Remove static iotable mappings for SRAM
ARM: OMAP4+: Move SRAM data to DT
...
This time around, the cleanup branch contains mostly code removal. A number
of board files for at91, imx and msm have become obsolete because of the
DT conversion and are now ready to be removed. The OMAP platform has
traditionally had its own DMA engine abstraction and as this is being
phased out, a lot of the original code is now unused and can be removed
as well.
S3C24xx can be simplified now that the restart code is a proper device
driver.
Finally, a number of cleanups in shmobile are done to prepare for
the addition of new code in other branches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Af7T
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"This time around, the cleanup branch contains mostly code removal. A
number of board files for at91, imx and msm have become obsolete
because of the DT conversion and are now ready to be removed. The
OMAP platform has traditionally had its own DMA engine abstraction and
as this is being phased out, a lot of the original code is now unused
and can be removed as well.
S3C24xx can be simplified now that the restart code is a proper device
driver.
Finally, a number of cleanups in shmobile are done to prepare for the
addition of new code in other branches"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91: Remove the support for the RSI EWS board
arm: mach-omap2: Convert pr_warning to pr_warn
ARM: OMAP: Remove unused pieces of legacy DMA API
ARM: at91: remove board file for Acme Systems Fox G20
ARM: orion5x: Convert pr_warning to pr_warn
ARM: S3C24XX: remove separate restart code
ARM: EXYNOS: Do not calculate boot address twice
ARM: sunxi: Remove sun4i reboot code from mach directory
ARM: imx: Remove mach-mxt_td60 board file
ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
ARM: shmobile: r8a7740: Clean up pm domain table
ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
ARM: shmobile: sh7372: Make domain_devices[] static __initdata
ARM: shmobile: mackerel: Make domain_devices[] static __initdata
clocksource: tcb_clksrc: sanitize IRQ request
ARM: at91/tclib: mask interruptions at shutdown and probe
ARM: at91/tclib: move initialization from alloc to probe
ARM: at91/tclib: prefer using of devm_* functions
ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
ARM: shmobile: r8a7791 is now called "R-Car M2-W"
...
These are bug fixes for harmless problems that were not important
enough to get fixed in 3.17. The majority of these are OMAP specific,
but there are also a couple for Marvell mvebu, cns3xxx, and others,
as well as some updates for the MAINTAINERS file.
In particular, Robert Jarzmik and Daniel Mack now volunteered to help
out maintaining the PXA platform, Krzysztof Halasa took over the
cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
meson platform, and Matthias Brugger is now listed for the mediatek
platform he recently contributed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Smzi
-----END PGP SIGNATURE-----
Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
"These are bug fixes for harmless problems that were not important
enough to get fixed in 3.17. The majority of these are OMAP specific,
but there are also a couple for Marvell mvebu, cns3xxx, and others, as
well as some updates for the MAINTAINERS file.
In particular, Robert Jarzmik and Daniel Mack now volunteered to help
out maintaining the PXA platform, Krzysztof Halasa took over the
cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
meson platform, and Matthias Brugger is now listed for the mediatek
platform he recently contributed"
* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
MAINTAINERS: update Shawn's email address
MAINTAINERS: condense some Tegra related entries
MAINTAINERS: add Alexandre Courbot for Tegra
MAINTAINERS: CNS3xxx and IXP4xx update.
MAINTAINERS: Add maintainers entry for Mediatek SoCs
arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500
MAINTAINERS: add a third maintainer to mach-bcm
CNS3xxx: Fix PCIe read size limit.
CNS3xxx: Fix logical PCIe topology.
CNS3xxx: Fix debug UART.
MAINTAINERS: Add entry for the Amlogic MesonX SoCs
MAINTAINERS: update ARM pxa maintainers
ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
ARM: Kirkwood: Fix DT based DSA.
ARM: OMAP2+: make of_device_ids const
ARM: omap2: make arrays containing machine compatible strings const
ARM: LPC32xx: Fix reset function
ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
...
Conflicts:
drivers/net/usb/r8152.c
net/netfilter/nfnetlink.c
Both r8152 and nfnetlink conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Armada XP
- Add HW datasheet references to docs
- Armada 370
- Change internal registers to 0xf1000000 for Armada 370 RD board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Cjp7
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu DT changes for v3.18 (round 2)" from Jason Cooper:
- Armada XP
- Add HW datasheet references to docs
- Armada 370
- Change internal registers to 0xf1000000 for Armada 370 RD board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: switch the Armada 370 RD board to internal registers at 0xf1000000
Documentation: arm: add hardware datasheet reference for Marvell Armada XP
The K2L MDIO io space has different start address.
Hence, fix it to be 0x26200f00 according to TRM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The K2E MDIO io space has different start address.
Hence, fix it to be 0x24200f00 according to TRM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Such configuration applied for USB0 devices, but It's missed for
USB1 device which is present only in K2E SoC - hence apply it.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The IO range size is set incorrectly for USB PHY0 deivice
it should be 24 instead of 32. Otherwise, It causes
USB PHY1 probing failure.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This patch enables the Ethernet port on the Marvell Berlin2Q DMP board.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the Ethernet node, enabling the network unit on Berlin
BG2Q SoCs.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are 2 MACIDs stored in the control module of the am33xx. These are
read by the cpsw driver if no valid MACID was found in the devicetree.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's our last set of fixes for 3.17. Most of these are for TI platforms,
fixing some noisy Kconfig issues, runtime clock and power issues on
several platforms and NAND timings on DRA7.
There are also a couple of bug fixes for i.MX, one for QCOM and a small
fix to avoid section mismatch noise on PXA.
Diffstat looks large, partially due to some tables being updated and
thus touching many lines. The qcom gsbi change also restructures clock
management a bit and thus touches a bunch of lines.
All in all, a bit more changes than we'd like at this point, but nothing
stands out as risky either so it seems like the right thing to send it
up now instead of holding it to the merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=K6xV
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Here's our last set of fixes for 3.17. Most of these are for TI
platforms, fixing some noisy Kconfig issues, runtime clock and power
issues on several platforms and NAND timings on DRA7.
There are also a couple of bug fixes for i.MX, one for QCOM and a
small fix to avoid section mismatch noise on PXA.
Diffstat looks large, partially due to some tables being updated and
thus touching many lines. The qcom gsbi change also restructures
clock management a bit and thus touches a bunch of lines.
All in all, a bit more changes than we'd like at this point, but
nothing stands out as risky either so it seems like the right thing to
send it up now instead of holding it to the merge window"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
drivers/soc: qcom: do not disable the iface clock in probe
ARM: imx: fix .is_enabled() of shared gate clock
ARM: OMAP3: Fix I/O chain clock line assertion timed out error
ARM: keystone: dts: fix bindings for pcie and usb clock nodes
bus: omap_l3_noc: Fix connID for OMAP4
ARM: DT: imx53: fix lvds channel 1 port
ARM: dts: cm-t54: fix serial console power supply.
ARM: dts: dra7-evm: Fix NAND GPMC timings
ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init
ARM: OMAP: Fix Kconfig warning for omap1
Enable gcov support for ARM based on original patches by David
Singleton and George G. Davis
Riku - updated to patch to current mainline kernel. The patch
has been submitted in 2010, 2012 - for symmetry, now in 2014 too.
https://lwn.net/Articles/390419/http://marc.info/?l=linux-arm-kernel&m=133823081813044
v2: remove arch/arm/kernel from gcov disabled files
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Apparently most of the newly added nodes had the same problem,
so instead of reverting the individual patches, this undoes
the effect of the merge and backs out all of them at once.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 610bd8722ef40b649b51f01045c5d1903f41b583.
"ARM: dts: hix5hd2: add wdg node" causes a build breakage due to
an undefined constatns:
Error: arch/arm/boot/dts/hisi-x5hd2.dtsi:374.22-23 syntax error
(Don't you just looove the dtc error messages? They are so informative!)
Signed-off-by: Olof Johansson <olof@lixom.net>
- mmc pinmux for at91sam9263 was missing
- little fix of the old clock implementation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUIvtbAAoJEAf03oE53VmQMP4H/1e3NM8xP6ePHSDzYW/SyqGx
IdFJwRff/FlHTzx23jND6z9SJDLTDu7NhUtABEsOIN+uJ28Vg9FLSR5+XqOfpbGt
UH9M2Xxla0WClIUzNDcDTyX56vo/TT0M1lnfh7IvP4yR0iWghbvDIWj/4L5Zl52n
bU1Ac+Spz4kuSShb6PSLxWfZXY7rlEFZbdOUd0ju2AqgLGbf+GeEWl4JcyPBb0id
MrS2YN5yO+0Ts72QPX7mSDS+RCzTm5ncIw6aLfgJzC0vWWvV6AXn6w6nYNUm/o4+
BlHZLHYOPVOLoz+uQE9biKcWeZhMR1orWkcIGXxfzao2cOm5WGa3CkuLd+dol2g=
=VQv1
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91 into next/fixes-non-critical
Pull "Fixes non critical for AT91" from Nicolas Ferre:
- mmc pinmux for at91sam9263 was missing
- little fix of the old clock implementation
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91:
ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
- un-use slot-node and deprecate the supports-highspped
for dw-mmc
- remove old USB2 PHY node for exynos5250
- exynos4412-odroid-common
enable PMIC interrupt and i2c improvements
- exynos5250-snow
fold exynos5250-cros-common
update display related nodes
- Peach Pit and Pi
improve power scheme, add support max77802 PMIC,
add hdmi regulators add thermistor, ISL29018 sensor,
set i2c clock at 400kHz, add support Atmel touchpad,
update display related nodes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJUGLrUAAoJEA0Cl+kVi2xqpTgQAKXkcDw25ITAB/50rpnV0oi0
qtM8sUA7MuZgtOA0ymQwV2/xGKei+KKYLT14Sgs8UWvQTGYBpj5p8xug35KP0e7Y
ndpc3I6K9Jx1D3ICu9aEhbuIPNLGxGhxMhcVLrRoH0UTqgQkH2AUpEADuR43HZx7
jD4wyJZtLhnKoiN8mPWto5tHXAUBG4iKHGYGkubfEGZUk1tHCbV6sBi1+6Dmc/gZ
QmBrhbB69iSe2Rvza/s7XCTafV18AW7XiWjm/Un3C4ARdZ28YUD6o0Dqb/ol6Eoc
rmyMxgNUyrabJrvrN9HUi6oXNGWcPl6a3oJoCoL0PL+9ks6pPRST+7rDCN5+a73Z
xlNl1EiiwHpgXbDufQESMglhV63aJ9BCRpYrj3n2nkJc42qyJNfldjMlKacObqKd
4S3sTIpfLI6WAk+7/RL47w9MMZtWtWOnJW4hgZ9OGiaRQe+i3lP2X/KYrsZcu/Zm
ZSMjVSOPc1w+9KxHTbuhsqaHeeDEJRn4eg4xSs6jfCE93l+5qnSQqR0NMQuRtqVk
4cL0AmowQUHX5dImKpBIg+CuMOvTayBG7ZvhPZSMCCDqm3fEhP5rmsh+NL0UozvH
9+j9NZV0ZJ3Y+7xzbkww0K04sNKU9ojcj5GYaNYq0QEOM0DtKBlcdSaVyF4ANtJe
Vv7zahRq1Ub2avVGQYd8
=aaca
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
Pull "Samsung DT update for 3.18" from Kukjin Kim:
- un-use slot-node and deprecate the supports-highspped
for dw-mmc
- remove old USB2 PHY node for exynos5250
- exynos4412-odroid-common
enable PMIC interrupt and i2c improvements
- exynos5250-snow
fold exynos5250-cros-common
update display related nodes
- Peach Pit and Pi
improve power scheme, add support max77802 PMIC,
add hdmi regulators add thermistor, ISL29018 sensor,
set i2c clock at 400kHz, add support Atmel touchpad,
update display related nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: remove old USB2 PHY node for exynos5250
ARM: dts: remove old USB2 PHY node hook for exynos5250-arndale
ARM: dts: update display related nodes for exynos5800-peach-pi
ARM: dts: update display related nodes for exynos5420-peach-pit
ARM: dts: update display related nodes for exynos5250-snow
ARM: dts: Add support Atmel touchpad for exynos5800-peach-pi
ARM: dts: Add support Atmel touchpad for exynos5420-peach-pit
ARM: dts: Set i2c7 clock at 400kHz for exynos based Peach boards
ARM: dts: Add ISL29018 sensor for exynos based Peach boards
ARM: dts: Add thermistor dts fragment used by exynos based Peach boards
ARM: dts: add hdmi regulators for exynos5420-peach-pit
ARM: dts: add hdmi regulators for exynos5800-peach-pi
ARM: dts: Add support max77802 PMIC for exynos based Peach boards
ARM: dts: Improve Peach Pit and Pi power scheme
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
ARM: dts: Fix MMC pinctrl for exynos5250-snow
ARM: dts: ODROID i2c improvements for exynos4412-odroid-common
ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common
Add dt for rk3288 i2s controller, since i2s clock pins and data pins
default to be GPIO, this patch also add pinctrl to mux them.
Tested on RK3288 board.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- introduction of the new SAMA5D4 SoC and associated Evaluation Kit
- low level soc detection and early printk code
- taking advantage of this, documentation of all AT91 SoC DT strings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUIB6OAAoJEAf03oE53VmQL+IIALNg2XPS49u2Y6VMjL3srFLt
7CUdNoGB7GJKoGrIXPSyAhJLkRlWREgRsEk/RSYqfBpyBZV4PIx9R6dIz1L+VxGU
9neXLkZGrYNzN8qJPz82+ARuCXdCF13N8ClVfXkNDhwbDnlbZgTkh4hNV118mKLt
+PF0d3w354ujieUD7D0pOcdRlny487qMNjtc/0U4P+H2sp2EtL0PpFHicn79InPT
V36PpFtUMEgbw2wQPNtlFkjQWstyZ7WJJGUbIX/2P3PASCwKsgrbmkvDvmfp5tUT
FdclJwJnxgcpni2fDvbz8Vq04i3hixl2Olm8tAvIXOI/hdVcurvZSfweJ5BrfDk=
=fMfO
-----END PGP SIGNATURE-----
Merge tag 'at91-soc2' of git://github.com/at91linux/linux-at91 into next/soc
Pull "Second SoC batch for 3.18" from Nicolas Ferre:
- introduction of the new SAMA5D4 SoC and associated Evaluation Kit
- low level soc detection and early printk code
- taking advantage of this, documentation of all AT91 SoC DT strings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-soc2' of git://github.com/at91linux/linux-at91:
ARM: at91: document Atmel SMART compatibles
ARM: at91: add sama5d4 support to sama5_defconfig
ARM: at91: dt: add device tree file for SAMA5D4ek board
ARM: at91: dt: add device tree file for SAMA5D4 SoC
ARM: at91: SAMA5D4 SoC detection code and low level routines
ARM: at91: introduce basic SAMA5D4 support
clk: at91: add a driver for the h32mx clock
start using the SRAM driver for some omaps, and update the
defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iau9
-----END PGP SIGNATURE-----
Merge tag 'soc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "part 2 of omap SoC changes" from Tony Lindgren:
Few hwmod changes to support upcoming 8250 driver with DMA,
start using the SRAM driver for some omaps, and update the
defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'soc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: Remove static iotable mappings for SRAM
ARM: OMAP4+: Move SRAM data to DT
ARM: AM335x: Get rid of unused sram init function
ARM: omap2plus_defconfig: Enable some display features
ARM: omap2plus_defconfig: Enable battery and reset drivers
ARM: omap2plus_defconfig: Add support for distros with systemd
ARM: omap2plus_defconfig: Add cpufreq to defconfig
ARM: omap2plus_defconfig: Shrink with savedefconfig
ARM: OMAP3: Use manual idle for UARTs because of DMA errata
ARM: OMAP2+: Add hwmod flag for HWMOD_RECONFIG_IO_CHAIN
move it to drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUGze9AAoJEBvUPslcq6VzL4oP/3WxH63RYT2eAyYQ8EGEpPiu
puAfHh30Rrc+TH9ir51DbdXbcGnimOsJSHP89oEM309NKsMhezVx7htDAMKGguNt
wH9uU9LSJtoAHiO06wQOQJCho2UCYd6Fywveauhauxw7k9EQ6uHZlN3q/knLH6r2
2eV6E7aHeqwOWFlajOQywICeu7vlmYmEJCdrbcl+GAWzfzH+yiBHfJwzns1RIvmv
A4qBHvbejL2053Iz4BpO+6iGBLfvzCjoNZn37i/Etc32MTf4cVLRXeoqQBTfthxS
27R5CeT+EHTEU9q77uRF3R1t2PzoUZPx04zPEntYsiBLTRtlolbC6WrMAmPNKYS+
ePwkbVNvhapXzKD5SlcaC+8aY29rToF4l7pCh7ARWG2IYMlZNWRgkeQPWS76LF2O
53g/cy+FUaW2WSWjwL/ktnRdv50ShzUngcdaOrztK9mnF8MihlmbZwoTk5JLFQP6
Ick7vc2SVVMP55d7tMhPWH7o07Xc0KvUb3goSvsA4z7KMopaqFAw5s6nZx2QwA6o
LLJNbShIRPrsbi21dohkE/WUUAHFjFsWcckfzK9XKOMM9RRY6usAFVvp3XwM0326
xRcd8vvAb5DP2nbBYxSqLYygCQKG80KlpF9Uvuk3NCK5aPo3gEcJs8/qzv5ZwFjq
DIWYy/AVRYGQhY/8GJUP
=cYAz
-----END PGP SIGNATURE-----
Merge tag 'intc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Merge "part 2 of omap intc changes" from Tony Lindgren:
Second part of omap intc interrupt controller changes to
move it to drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'intc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
irqchip: omap-intc: remove unnecessary comments
irqchip: omap-intc: correct maximum number or MIR registers
irqchip: omap-intc: enable TURBO idle mode
irqchip: omap-intc: enable IP protection
irqchip: omap-intc: remove unnecesary of_address_to_resource() call
irqchip: omap-intc: comment style cleanup
irqchip: omap-intc: minor improvement to omap_irq_pending()
arm: omap: irq: move irq.c to drivers/irqchip/
irqchip: add irq-omap-intc.h header
arm: omap2: n8x0: move i2c devices to DT
... for V2M-P1 motherboard CLCD (limited to 640x480 16bpp and using
dedicated video RAM bank) and for V2P-CA9 (up to 1024x768 16bpp).
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "ARM: BCM: Broadcom BCM63138 support" from Florian Fainelli:
This patchset adds very minimal support for the BCM63138 SoC which is
a xDSL SoC using a dual Cortex A9 CPU complex.
* tag 'bcm63138-v4' of http://github.com/brcm/linux:
MAINTAINERS: add entry for the Broadcom BCM63xx ARM SoCs
ARM: BCM63XX: add BCM963138DVT Reference platform DTS
ARM: BCM63XX: add BCM63138 minimal Device Tree
ARM: BCM63XX: add low-level UART debug support
ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC
Conflicts:
arch/arm/Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
help reduce use of iomap.h in a future code cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=X2mr
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt
Pull "ARM: tegra: device tree changes for 3.18" from Stephen Warren:
The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
help reduce use of iomap.h in a future code cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: enable PCIe in Jetson TK1 DT
ARM: tegra: add PCIe to Tegra124 DT
ARM: tegra: rely on bootloader pinmux programming on Tegra124
ARM: tegra: add Acer Chromebook 13 device tree
ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi
ARM: tegra: add touchpad to Venice2 DT
ARM: tegra: Add device tree nodes for flow controller
ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
ARM: tegra: Add SATA controller to Tegra124 device tree
- specify DMA channels for USART on sama5d3 and choose peripherals
that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
to use enhancements that will land in drivers during this release
- several new nodes and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUGxCuAAoJEAf03oE53VmQDRYIAIMkFVY9ZfhVDD8BEwOXm5FL
ZECxGAKxzoaN+P5DbDOqCWmW9juxLhJjxPrwmpoYi7ShG5exYGl2jUZiF6fRq/fH
JJgSNKuNCLJbwlVWBo150v+2gRTyew3Pt8ijZWkzK06YPjW8Oxy3c4MjZ+wF2838
k9jv/8dMT52nEr24x9Py0CPYR1Dh+EzFfoIXyJ4XM66CPIFfn4Ds4tz2gRhj7t2Z
8NyGJ/F+fP3HB1ds3nauaS77XkulN5R/odIQchUzu4IO+mEQY9pbeVvyXWv97Y5T
gL9AE5hcSwnE2xrXJGt2l2HV90FZMFU108WIKucca+RPOlfaB25fpMvMm8gAxDA=
=fE/3
-----END PGP SIGNATURE-----
Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dt
Pull "More AT91 DT material for 3.18" from Nicolas Ferre:
- specify DMA channels for USART on sama5d3 and choose peripherals
that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
to use enhancements that will land in drivers during this release
- several new nodes and fixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91sam9m10g45ek add rtc node
ARM: at91/dt: sama5d3: use new pinctrl compatible string
ARM: at91/dt: sama5d3: add the nfc clock
ARM: at91/dt: declare sckc node on at91sam9g45
ARM: at91/dt: Fix typo regarding can0_clk
ARM: at91/dt: at91sam9g20: switch ssc compatible string
ARM: at91/dt: at91sam9rl: switch ssc compatible string
ARM: at91: sama5d3xek: reserve dma channel for audio
ARM: at91: sama5d3: add usart dma configurations
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex
A9 and an ARM Mali-400 GPU.
This patch adds two basic DTSI for the preliminary support of Meson and
Meson6 SoCs. Another DTS is also added for supporting the atv1200 board,
produced by Geniatech inc.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUF7RZAAoJEFBXWFqHsHzOFUgH/i/9xApJoCS4X5HcnS3p0uYO
XLu9qkl4BgvlWTehOQlBBn4Nitv9A2b23BFkZ73+FMiM43NgEXTpitt1oTdO57tA
lmOrtlIeKFGjLLwqBu0WL01VKaH7O6B4Qe09xv/Zx3wz4yYC9l/T23yQ/Z/UFJQT
afqyzMrfzKd0WyE4RsuL/Ir94K9Y0FzWV1u8mhupYlqDdMop27XZRMD2CHs3W9PI
v3c7hjXT4RtLdmvHWUSVg5xwBE7ntYysv7KlEsBebSQ6dkl5vIWDO37yuGQjUAB5
v/Ro63UwM/wPqzq50VESG5c4/OWqz+xLN0r9z+csapDcezO86dCceeek0+qyjvY=
=svCp
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo:
The i.MX device tree changes for 3.18:
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
* tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits)
ARM: dts: imx6: make gpt per clock can be from OSC
ARM: dts: imx: ventana: add canbus support for GW52xx
ARM: dts: imx: ventana: cleanup pinctrl groups
ARM: dts: imx: ventana: configure padconf for all pins
ARM: dts: imx: ventana: use gpio constants
ARM: dts: imx: ventana: remove unused aliases
ARM: dts: imx: ventana: remove unsupported dt nodes
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
ARM: dts: imx28-tx28: use GPIO flags
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
ARM: dts: imx6sl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl-sabresd: Configure the pins locally
ARM: dts: imx28-m28evk: Fix display duplicate name warning
ARM: dts: imx28-tx28: Fix display duplicate name warning
ARM: dts: imx28-m28cu: Fix display duplicate name warning
ARM: dts: imx28-cfa100: Fix display duplicate name warning
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add initial devicetree support for i.MX1
- Support GPT per clock source from OSC for i.MX6
- A couple of parent selection corrections for i.MX6SL clock driver
- Support more chip revision for i.MX6
- Convert pr_warning to pr_warn
- Add exclusive gate clock support
- Add BYPASS support for i.MX6 PLL clocks
- Update i.MX6 clock tree for audio use case
- A couple of VF610 clock driver updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUF672AAoJEFBXWFqHsHzOTXQIAJ0ZTXtzQsJ3gLFU+CwRMm2F
hIzFDNOsRkEYpJaa6AkweBmLyUUdePn9rUVRzCi4P9Ux5uCSU6sd3CPHOykOCrV4
xGXk+hL47IpPNGP1tZ4NU7bVBz4BvrIkLRXBxlO+YZ2ZKf+k8Ma166c3iwYFqpDD
8Fd7SQrKleZiXXDgz6y8SRCsOre3HmmjeJBBHhKuegSRscyh2cYfduBsmr6xTojR
Jzcega1pprb1ojxflMVLHcGRquyYVHaoH65mD4leDhSWa93MZFCOAFCl27qsZNs5
gTlaayqq8ws8aFOXi9OmONSjL+ZBMkf0Jk/QGOo5cLCUKYYv10KK2LXFeBOpg8A=
=yLWI
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Merge "ARM: imx: SoC updates for 3.18" from Shawn Guo:
The i.MX SoC updates for 3.18:
- Add initial devicetree support for i.MX1
- Support GPT per clock source from OSC for i.MX6
- A couple of parent selection corrections for i.MX6SL clock driver
- Support more chip revision for i.MX6
- Convert pr_warning to pr_warn
- Add exclusive gate clock support
- Add BYPASS support for i.MX6 PLL clocks
- Update i.MX6 clock tree for audio use case
- A couple of VF610 clock driver updates
* tag 'imx-soc-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: imx_v6_v7_defconfig updates
ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM
arm: mach-imx: Convert pr_warning to pr_warn
ARM: imx: source gpt per clk from OSC for system timer
ARM: imx: add gpt_3m clk for i.mx6qdl
ARM: imx: fix register offset of pll7_usb_host gate clock
ARM: clk-imx6sl: refine clock tree for SSI
ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver
ARM: imx6sx: add BYPASS support for PLL clocks
ARM: imx6sl: add BYPASS support for PLL clocks
ARM: imx6q: add BYPASS support for PLL clocks
ARM: imx: add an exclusive gate clock type
ARM: clk-imx6q: refine clock tree for SSI
ARM: clk-imx6q: refine clock tree for ASRC
ARM: clk-imx6sl: correct the pxp and epdc axi clock selections
ARM: clk-imx6q: refine clock tree for ESAI
ARM: clk-imx6sl: Select appropriate parents for LCDIF clocks
ARM: clk-imx6sl: Remove csi_lcdif_sels[]
ARM: imx: clk-vf610: Add USBPHY clocks
ARM: imx: add cpufreq support for i.mx6sx
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch changes the compatible string of the GIC to the
new "arm,cortex-a7-gic" which does reflect the actual hardware.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the missing 'compatible' property to device tree root node of
- mt6589-aquaris5.dts
and document the new values.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add boot argument for earlyprintk to the aquaris5 device tree file.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This changes the unit address of the gic node to it's first register area.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek
SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
