Commit Graph

10 Commits

Author SHA1 Message Date
Tom Tucker
cec56c8ff5 svcrdma: Cleanup sparse warnings in the svcrdma module
The svcrdma transport was un-marshalling requests in-place. This resulted
in sparse warnings due to __beXX data containing both NBO and HBO data.

The code has been restructured to do byte-swapping as the header is
parsed instead of when the header is validated immediately after receipt.

Also moved extern declarations for the workqueue and memory pools to the
private header file.

Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-02-17 18:38:50 -05:00
Linus Torvalds
28890d3598 Merge branch 'nfs-for-3.1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'nfs-for-3.1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
  NFSv4: Don't use the delegation->inode in nfs_mark_return_delegation()
  nfs: don't use d_move in nfs_async_rename_done
  RDMA: Increasing RPCRDMA_MAX_DATA_SEGS
  SUNRPC: Replace xprt->resend and xprt->sending with a priority queue
  SUNRPC: Allow caller of rpc_sleep_on() to select priority levels
  SUNRPC: Support dynamic slot allocation for TCP connections
  SUNRPC: Clean up the slot table allocation
  SUNRPC: Initalise the struct xprt upon allocation
  SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot
  pnfs: simplify pnfs files module autoloading
  nfs: document nfsv4 sillyrename issues
  NFS: Convert nfs4_set_ds_client to EXPORT_SYMBOL_GPL
  SUNRPC: Convert the backchannel exports to EXPORT_SYMBOL_GPL
  SUNRPC: sunrpc should not explicitly depend on NFS config options
  NFS: Clean up - simplify the switch to read/write-through-MDS
  NFS: Move the pnfs write code into pnfs.c
  NFS: Move the pnfs read code into pnfs.c
  NFS: Allow the nfs_pageio_descriptor to signal that a re-coalesce is needed
  NFS: Use the nfs_pageio_descriptor->pg_bsize in the read/write request
  NFS: Cache rpc_ops in struct nfs_pageio_descriptor
  ...
2011-07-27 13:23:02 -07:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Steve Dickson
2773395b34 RDMA: Increasing RPCRDMA_MAX_DATA_SEGS
Our performance team has noticed that increasing
RPCRDMA_MAX_DATA_SEGS from 8 to 64 significantly
increases throughput when using the RDMA transport.

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-25 14:54:31 -04:00
Tom Tucker
5c635e09ce RPCRDMA: Fix FRMR registration/invalidate handling.
When the rpc_memreg_strategy is 5, FRMR are used to map RPC data.
This mode uses an FRMR to map the RPC data, then invalidates
(i.e. unregisers) the data in xprt_rdma_free. These FRMR are used
across connections on the same mount, i.e. if the connection goes
away on an idle timeout and reconnects later, the FRMR are not
destroyed and recreated.

This creates a problem for transport errors because the WR that
invalidate an FRMR may be flushed (i.e. fail) leaving the
FRMR valid. When the FRMR is later used to map an RPC it will fail,
tearing down the transport and starting over. Over time, more and
more of the FRMR pool end up in the wrong state resulting in
seemingly random disconnects.

This fix keeps track of the FRMR state explicitly by setting it's
state based on the successful completion of a reg/inv WR. If the FRMR
is ever used and found to be in the wrong state, an invalidate WR
is prepended, re-syncing the FRMR state and avoiding the connection loss.

Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11 15:39:27 -05:00
Tom Talpey
5675add36e RPC/RDMA: harden connection logic against missing/late rdma_cm upcalls.
Add defensive timeouts to wait_for_completion() calls in RDMA
address resolution, and make them interruptible. Fix the timeout
units to milliseconds (formerly jiffies) and move to private header.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10 15:13:31 -04:00
Tom Talpey
9191ca3b38 RPC/RDMA: adhere to protocol for unpadded client trailing write chunks.
The RPC/RDMA protocol allows clients and servers to avoid RDMA
operations for data which is purely the result of XDR padding.
On the client, automatically insert the necessary padding for
such server replies, and optionally don't marshal such chunks.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10 15:12:33 -04:00
Tom Talpey
575448bd36 RPC/RDMA: suppress retransmit on RPC/RDMA clients.
An RPC/RDMA client cannot retransmit on an unbroken connection,
doing so violates its flow control with the server.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10 15:10:36 -04:00
Tom Talpey
fe9053b30b RPC/RDMA: add data types and new FRMR memory registration enum.
Internal RPC/RDMA structure updates in preparation for FRMR support.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10 15:09:24 -04:00
\"Talpey, Thomas\
f58851e6b0 RPCRDMA: rpc rdma transport switch
This implements the configuration and building of the core transport
switch implementation of the rpcrdma transport. Stubs are provided for
the rpcrdma protocol handling, and the infiniband/iwarp verbs interface.
These are provided in following patches.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:18:03 -04:00