Commit Graph

30471 Commits

Author SHA1 Message Date
David S. Miller
7089fdd814 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains two Netfilter fixes for your net
tree, they are:

* Fix endianness in nft_reject, the NFTA_REJECT_TYPE netlink attributes
  was not converted to network byte order as needed by all nfnetlink
  subsystems, from Eric Leblond.

* Restrict SYNPROXY target to INPUT and FORWARD chains, this avoid a
  possible crash due to misconfigurations, from Patrick McHardy.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17 15:06:20 -05:00
Sasha Levin
37ab4fa784 net: unix: allow bind to fail on mutex lock
This is similar to the set_peek_off patch where calling bind while the
socket is stuck in unix_dgram_recvmsg() will block and cause a hung task
spew after a while.

This is also the last place that did a straightforward mutex_lock(), so
there shouldn't be any more of these patches.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17 15:04:42 -05:00
Eric Dumazet
e47eb5dfb2 udp: ipv4: do not use sk_dst_lock from softirq context
Using sk_dst_lock from softirq context is not supported right now.

Instead of adding BH protection everywhere,
udp_sk_rx_dst_set() can instead use xchg(), as suggested
by David.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 9750223102 ("udp: ipv4: must add synchronization in udp_sk_rx_dst_set()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17 14:50:58 -05:00
wangweidong
9bd7d20c45 sctp: loading sctp when load sctp_probe
when I modprobe sctp_probe, it failed with "FATAL: ". I found that
sctp should load before sctp_probe register jprobe. So I add a
sctp_setup_jprobe for loading 'sctp' when first failed to register
jprobe, just do this similar to dccp_probe.

v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-16 20:04:27 -05:00
Linus Torvalds
4a251dd29c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
    figure out why it breaks things.

 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
    was basically doing "x == x", from Dave Jones.

 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
    Sebastian Siewior.

 4) Blackhole and prohibit routes in ipv6 were not doing the right thing
    because their ->input and ->output methods were not being assigned
    correctly.  Now they behave properly like their ipv4 counterparts.
    From Kamala R.

 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
    really do not support this feature and will send garbage packets if
    fed fraglist SKBs.  From Eric Dumazet.

 6) Fix long standing user triggerable BUG_ON over loopback in RDS
    protocol stack, from Venkat Venkatsubra.

 7) Several not so common code paths can potentially try to invoke
    packet scheduler actions that might be NULL without checking.  Shore
    things up by either 1) defining a method as mandatory and erroring
    on registration if that method is NULL 2) defininig a method as
    optional and the registration function hooks up a default
    implementation when NULL is seen.  From Jamal Hadi Salim.

 8) Fix fragment detection in xen-natback driver, from Paul Durrant.

 9) Kill dangling enter_memory_pressure method in cg_proto ops, from
    Eric W Biederman.

10) SKBs that traverse namespaces should have their local_df cleared,
    from Hannes Frederic Sowa.

11) IOCB file position is not being updated by macvtap_aio_read() and
    tun_chr_aio_read().  From Zhi Yong Wu.

12) Don't free virtio_net netdev before releasing all of the NAPI
    instances.  From Andrey Vagin.

13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.

14) IPv6 routes that are no cached routes should not count against the
    garbage collection limits.  We had this almost right, but were
    missing handling addrconf generated routes properly.  From Hannes
    Frederic Sowa.

15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
    route info when they are called, from Stefan Tomanek.

16) TUN and MACVTAP have had truncated packet signalling for some time,
    fix from Jason Wang.

17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.

18) xen-netback does not interpret the NAPI budget properly for TX work,
    fix from Paul Durrant.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
  igb: Fix for issue where values could be too high for udelay function.
  i40e: fix null dereference
  xen-netback: fix gso_prefix check
  net: make neigh_priv_len in struct net_device 16bit instead of 8bit
  drivers: net: cpsw: fix for cpsw crash when build as modules
  xen-netback: napi: don't prematurely request a tx event
  xen-netback: napi: fix abuse of budget
  sch_tbf: use do_div() for 64-bit divide
  udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
  net:fec: remove duplicate lines in comment about errata ERR006358
  Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
  8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
  xen-netback: make sure skb linear area covers checksum field
  net: smc91x: Fix device tree based configuration so it's usable
  udp: ipv4: fix potential use after free in udp_v4_early_demux()
  macvtap: signal truncated packets
  tun: unbreak truncated packet signalling
  net: sched: htb: fix the calculation of quantum
  net: sched: tbf: fix the calculation of max_size
  micrel: add support for KSZ8041RNLI
  ...
2013-12-15 11:56:47 -08:00
Eric Leblond
a3adadf301 netfilter: nft_reject: fix endianness in dump function
The dump function in nft_reject_ipv4 was not converting a u32
field to network order before sending it to userspace, this
needs to happen for consistency with other nf_tables and
nfnetlink subsystems.

Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-12 09:37:39 +01:00
Yang Yingliang
d55d282e6a sch_tbf: use do_div() for 64-bit divide
It's doing a 64-bit divide which is not supported
on 32-bit architectures in psched_ns_t2l(). The
correct way to do this is to use do_div().

It's introduced by commit cc106e441a
("net: sched: tbf: fix the calculation of max_size")

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 22:53:26 -05:00
Eric Dumazet
9750223102 udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
Unlike TCP, UDP input path does not hold the socket lock.

Before messing with sk->sk_rx_dst, we must use a spinlock, otherwise
multiple cpus could leak a refcount.

This patch also takes care of renewing a stale dst entry.
(When the sk->sk_rx_dst would not be used by IP early demux)

Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 20:21:10 -05:00
Eric Dumazet
610438b744 udp: ipv4: fix potential use after free in udp_v4_early_demux()
pskb_may_pull() can reallocate skb->head, we need to move the
initialization of iph and uh pointers after its call.

Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 16:10:14 -05:00
Yang Yingliang
1598f7cb47 net: sched: htb: fix the calculation of quantum
Now, 32bit rates may be not the true rate.
So use rate_bytes_ps which is from
max(rate32, rate64) to calcualte quantum.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 15:08:41 -05:00
Yang Yingliang
cc106e441a net: sched: tbf: fix the calculation of max_size
Current max_size is caluated from rate table. Now, the rate table
has been replaced and it's wrong to caculate max_size based on this
rate table. It can lead wrong calculation of max_size.

The burst in kernel may be lower than user asked, because burst may gets
some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s")
and it seems we cannot avoid this loss. Burst's value(max_size) based on
rate table may be equal user asked. If a packet's length is max_size, this
packet will be stalled in tbf_dequeue() because its length is above the
burst in kernel so that it cannot get enough tokens. The max_size guards
against enqueuing packet sizes above q->buffer "time" in tbf_enqueue().

To make consistent with the calculation of tokens, this patch add a helper
psched_ns_t2l() to calculate burst(max_size) directly to fix this problem.

After this fix, we can support to using 64bit rates to calculate burst as well.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 15:08:41 -05:00
Patrick McHardy
f01b3926ee netfilter: SYNPROXY target: restrict to INPUT/FORWARD
Fix a crash in synproxy_send_tcp() when using the SYNPROXY target in the
PREROUTING chain caused by missing routing information.

Reported-by: Nicki P. <xastx@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-11 11:30:25 +01:00
Eric Dumazet
8afdd99a13 udp: ipv4: fix an use after free in __udp4_lib_rcv()
Dave Jones reported a use after free in UDP stack :

[ 5059.434216] =========================
[ 5059.434314] [ BUG: held lock freed! ]
[ 5059.434420] 3.13.0-rc3+ #9 Not tainted
[ 5059.434520] -------------------------
[ 5059.434620] named/863 is freeing memory ffff88005e960000-ffff88005e96061f, with a lock still held there!
[ 5059.434815]  (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0
[ 5059.435012] 3 locks held by named/863:
[ 5059.435086]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff8143054d>] __netif_receive_skb_core+0x11d/0x940
[ 5059.435295]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81467a5e>] ip_local_deliver_finish+0x3e/0x410
[ 5059.435500]  #2:  (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0
[ 5059.435734]
stack backtrace:
[ 5059.435858] CPU: 0 PID: 863 Comm: named Not tainted 3.13.0-rc3+ #9 [loadavg: 0.21 0.06 0.06 1/115 1365]
[ 5059.436052] Hardware name:                  /D510MO, BIOS MOPNV10J.86A.0175.2010.0308.0620 03/08/2010
[ 5059.436223]  0000000000000002 ffff88007e203ad8 ffffffff8153a372 ffff8800677130e0
[ 5059.436390]  ffff88007e203b10 ffffffff8108cafa ffff88005e960000 ffff88007b00cfc0
[ 5059.436554]  ffffea00017a5800 ffffffff8141c490 0000000000000246 ffff88007e203b48
[ 5059.436718] Call Trace:
[ 5059.436769]  <IRQ>  [<ffffffff8153a372>] dump_stack+0x4d/0x66
[ 5059.436904]  [<ffffffff8108cafa>] debug_check_no_locks_freed+0x15a/0x160
[ 5059.437037]  [<ffffffff8141c490>] ? __sk_free+0x110/0x230
[ 5059.437147]  [<ffffffff8112da2a>] kmem_cache_free+0x6a/0x150
[ 5059.437260]  [<ffffffff8141c490>] __sk_free+0x110/0x230
[ 5059.437364]  [<ffffffff8141c5c9>] sk_free+0x19/0x20
[ 5059.437463]  [<ffffffff8141cb25>] sock_edemux+0x25/0x40
[ 5059.437567]  [<ffffffff8141c181>] sock_queue_rcv_skb+0x81/0x280
[ 5059.437685]  [<ffffffff8149bd21>] ? udp_queue_rcv_skb+0xd1/0x4b0
[ 5059.437805]  [<ffffffff81499c82>] __udp_queue_rcv_skb+0x42/0x240
[ 5059.437925]  [<ffffffff81541d25>] ? _raw_spin_lock+0x65/0x70
[ 5059.438038]  [<ffffffff8149bebb>] udp_queue_rcv_skb+0x26b/0x4b0
[ 5059.438155]  [<ffffffff8149c712>] __udp4_lib_rcv+0x152/0xb00
[ 5059.438269]  [<ffffffff8149d7f5>] udp_rcv+0x15/0x20
[ 5059.438367]  [<ffffffff81467b2f>] ip_local_deliver_finish+0x10f/0x410
[ 5059.438492]  [<ffffffff81467a5e>] ? ip_local_deliver_finish+0x3e/0x410
[ 5059.438621]  [<ffffffff81468653>] ip_local_deliver+0x43/0x80
[ 5059.438733]  [<ffffffff81467f70>] ip_rcv_finish+0x140/0x5a0
[ 5059.438843]  [<ffffffff81468926>] ip_rcv+0x296/0x3f0
[ 5059.438945]  [<ffffffff81430b72>] __netif_receive_skb_core+0x742/0x940
[ 5059.439074]  [<ffffffff8143054d>] ? __netif_receive_skb_core+0x11d/0x940
[ 5059.442231]  [<ffffffff8108c81d>] ? trace_hardirqs_on+0xd/0x10
[ 5059.442231]  [<ffffffff81430d83>] __netif_receive_skb+0x13/0x60
[ 5059.442231]  [<ffffffff81431c1e>] netif_receive_skb+0x1e/0x1f0
[ 5059.442231]  [<ffffffff814334e0>] napi_gro_receive+0x70/0xa0
[ 5059.442231]  [<ffffffffa01de426>] rtl8169_poll+0x166/0x700 [r8169]
[ 5059.442231]  [<ffffffff81432bc9>] net_rx_action+0x129/0x1e0
[ 5059.442231]  [<ffffffff810478cd>] __do_softirq+0xed/0x240
[ 5059.442231]  [<ffffffff81047e25>] irq_exit+0x125/0x140
[ 5059.442231]  [<ffffffff81004241>] do_IRQ+0x51/0xc0
[ 5059.442231]  [<ffffffff81542bef>] common_interrupt+0x6f/0x6f

We need to keep a reference on the socket, by using skb_steal_sock()
at the right place.

Note that another patch is needed to fix a race in
udp_sk_rx_dst_set(), as we hold no lock protecting the dst.

Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:58:40 -05:00
wangweidong
b486b2289e sctp: fix up a spacing
fix up spacing of proc_sctp_do_hmac_alg for according to the
proc_sctp_do_rto_min[max] in sysctl.c

Suggested-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:54:34 -05:00
wangweidong
4f3fdf3bc5 sctp: add check rto_min and rto_max in sysctl
rto_min should be smaller than rto_max while rto_max should be larger
than rto_min. Add two proc_handler for the checking.

Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:54:34 -05:00
wangweidong
85f935d41a sctp: check the rto_min and rto_max in setsockopt
When we set 0 to rto_min or rto_max, just not change the value. Also
we should check the rto_min > rto_max.

Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:54:34 -05:00
Florent Fourcot
ce7a3bdf18 ipv6: do not erase dst address with flow label destination
This patch is following b579035ff7
	"ipv6: remove old conditions on flow label sharing"

Since there is no reason to restrict a label to a
destination, we should not erase the destination value of a
socket with the value contained in the flow label storage.

This patch allows to really have the same flow label to more
than one destination.

Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:51:00 -05:00
Neil Horman
9f70f46bd4 sctp: properly latch and use autoclose value from sock to association
Currently, sctp associations latch a sockets autoclose value to an association
at association init time, subject to capping constraints from the max_autoclose
sysctl value.  This leads to an odd situation where an application may set a
socket level autoclose timeout, but sliently sctp will limit the autoclose
timeout to something less than that.

Fix this by modifying the autoclose setsockopt function to check the limit, cap
it and warn the user via syslog that the timeout is capped.  This will allow
getsockopt to return valid autoclose timeout values that reflect what subsequent
associations actually use.

While were at it, also elimintate the assoc->autoclose variable, it duplicates
whats in the timeout array, which leads to multiple sources for the same
information, that may differ (as the former isn't subject to any capping).  This
gives us the timeout information in a canonical place and saves some space in
the association structure as well.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
CC: Wang Weidong <wangweidong1@huawei.com>
CC: David Miller <davem@davemloft.net>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:41:26 -05:00
Ying Xue
00ede97709 tipc: protect handler_enabled variable with qitem_lock spin lock
'handler_enabled' is a global flag indicating whether the TIPC
signal handling service is enabled or not. The lack of lock
protection for this flag incurs a risk for contention, so that
a tipc_k_signal() call might queue a signal handler to a destroyed
signal queue, with unpredictable results. To correct this, we let
the already existing 'qitem_lock' protect the flag, as it already
does with the queue itself. This way, we ensure that the flag
always is consistent across all cores.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:35:49 -05:00
Jon Paul Maloy
993b858e37 tipc: correct the order of stopping services at rmmod
The 'signal handler' service in TIPC is a mechanism that makes it
possible to postpone execution of functions, by launcing them into
a job queue for execution in a separate tasklet, independent of
the launching execution thread.

When we do rmmod on the tipc module, this service is stopped after
the network service. At the same time, the stopping of the network
service may itself launch jobs for execution, with the risk that these
functions may be scheduled for execution after the data structures
meant to be accessed by the job have already been deleted. We have
seen this happen, most often resulting in an oops.

This commit ensures that the signal handler is the very first to be
stopped when TIPC is shut down, so there are no surprises during
the cleanup of the other services.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:35:49 -05:00
Sasha Levin
12663bfc97 net: unix: allow set_peek_off to fail
unix_dgram_recvmsg() will hold the readlock of the socket until recv
is complete.

In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until
unix_dgram_recvmsg() will complete (which can take a while) without allowing
us to break out of it, triggering a hung task spew.

Instead, allow set_peek_off to fail, this way userspace will not hang.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 21:45:15 -05:00
Stefan Tomanek
673498b8ed inet: fix NULL pointer Oops in fib(6)_rule_suppress
This changes ensures that the routing entry investigated by the suppress
function actually does point to a device struct before following that pointer,
fixing a possible kernel oops situation when verifying the interface group
associated with a routing table entry.

According to Daniel Golle, this Oops can be triggered by a user process trying
to establish an outgoing IPv6 connection while having no real IPv6 connectivity
set up (only autoassigned link-local addresses).

Fixes: 6ef94cfafb ("fib_rules: add route suppression based on ifgroup")

Reported-by: Daniel Golle <daniel.golle@gmail.com>
Tested-by: Daniel Golle <daniel.golle@gmail.com>
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 17:54:23 -05:00
Changli Gao
d323e92cc3 net: drop_monitor: fix the value of maxattr
maxattr in genl_family should be used to save the max attribute
type, but not the max command type. Drop monitor doesn't support
any attributes, so we should leave it as zero.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09 21:10:38 -05:00
Hannes Frederic Sowa
a3300ef4bb ipv6: don't count addrconf generated routes against gc limit
Brett Ciphery reported that new ipv6 addresses failed to get installed
because the addrconf generated dsts where counted against the dst gc
limit. We don't need to count those routes like we currently don't count
administratively added routes.

Because the max_addresses check enforces a limit on unbounded address
generation first in case someone plays with router advertisments, we
are still safe here.

Reported-by: Brett Ciphery <brett.ciphery@windriver.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09 21:00:39 -05:00
David S. Miller
6a46ff87d4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains three Netfilter fixes for your net tree,
they are:

* fix incorrect comparison in the new netnet hash ipset type, from
  Dave Jones.

* fix splat in hashlimit due to missing removal of the content of its
  proc entry in netnamespaces, from Sergey Popovich.

* fix missing rule flushing operation by table in nf_tables. Table
  flushing was already discussed back in October but this got lost and
  no patch has hit the tree to address this issue so far, from me.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09 20:43:21 -05:00
Daniel Borkmann
66e56cd46b packet: fix send path when running with proto == 0
Commit e40526cb20 introduced a cached dev pointer, that gets
hooked into register_prot_hook(), __unregister_prot_hook() to
update the device used for the send path.

We need to fix this up, as otherwise this will not work with
sockets created with protocol = 0, plus with sll_protocol = 0
passed via sockaddr_ll when doing the bind.

So instead, assign the pointer directly. The compiler can inline
these helper functions automagically.

While at it, also assume the cached dev fast-path as likely(),
and document this variant of socket creation as it seems it is
not widely used (seems not even the author of TX_RING was aware
of that in his reference example [1]). Tested with reproducer
from e40526cb20.

 [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap#Example

Fixes: e40526cb20 ("packet: fix use after free race in send path when dev is released")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Salam Noureddine <noureddine@aristanetworks.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09 20:09:20 -05:00
Pablo Neira Ayuso
cf9dc09d09 netfilter: nf_tables: fix missing rules flushing per table
This patch allows you to atomically remove all rules stored in
a table via the NFT_MSG_DELRULE command. You only need to indicate
the specific table and no chain to flush all rules stored in that
table.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-07 22:55:48 +01:00
Sergey Popovich
b4ef4ce093 netfilter: xt_hashlimit: fix proc entry leak in netns destroy path
In (32263dd1b netfilter: xt_hashlimit: fix namespace destroy path)
the hashlimit_net_exit() function is always called right before
hashlimit_mt_destroy() to release netns data. If you use xt_hashlimit
with IPv4 and IPv6 together, this produces the following splat via
netconsole in the netns destroy path:

 Pid: 9499, comm: kworker/u:0 Tainted: G        WC O 3.2.0-5-netctl-amd64-core2
 Call Trace:
  [<ffffffff8104708d>] ? warn_slowpath_common+0x78/0x8c
  [<ffffffff81047139>] ? warn_slowpath_fmt+0x45/0x4a
  [<ffffffff81144a99>] ? remove_proc_entry+0xd8/0x22e
  [<ffffffff810ebbaa>] ? kfree+0x5b/0x6c
  [<ffffffffa043c501>] ? hashlimit_net_exit+0x45/0x8d [xt_hashlimit]
  [<ffffffff8128ab30>] ? ops_exit_list+0x1c/0x44
  [<ffffffff8128b28e>] ? cleanup_net+0xf1/0x180
  [<ffffffff810369fc>] ? should_resched+0x5/0x23
  [<ffffffff8105b8f9>] ? process_one_work+0x161/0x269
  [<ffffffff8105aea5>] ? cwq_activate_delayed_work+0x3c/0x48
  [<ffffffff8105c8c2>] ? worker_thread+0xc2/0x145
  [<ffffffff8105c800>] ? manage_workers.isra.25+0x15b/0x15b
  [<ffffffff8105fa01>] ? kthread+0x76/0x7e
  [<ffffffff813581f4>] ? kernel_thread_helper+0x4/0x10
  [<ffffffff8105f98b>] ? kthread_worker_fn+0x139/0x139
  [<ffffffff813581f0>] ? gs_change+0x13/0x13
 ---[ end trace d8c3cc0ad163ef79 ]---
 ------------[ cut here ]------------
 WARNING: at /usr/src/linux-3.2.52/debian/build/source_netctl/fs/proc/generic.c:849
 remove_proc_entry+0x217/0x22e()
 Hardware name:
 remove_proc_entry: removing non-empty directory 'net/ip6t_hashlimit', leaking at least 'IN-REJECT'

This is due to lack of removal net/ip6t_hashlimit/* entries in
hashlimit_proc_net_exit(), since only IPv4 entries are deleted. Fix
it by always removing the IPv4 and IPv6 entries and their parent
directories in the netns destroy path.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-07 22:46:51 +01:00
Jiri Pirko
859828c0ea br: fix use of ->rx_handler_data in code executed on non-rx_handler path
br_stp_rcv() is reached by non-rx_handler path. That means there is no
guarantee that dev is bridge port and therefore simple NULL check of
->rx_handler_data is not enough. There is need to check if dev is really
bridge port and since only rcu read lock is held here, do it by checking
->rx_handler pointer.

Note that synchronize_net() in netdev_rx_handler_unregister() ensures
this approach as valid.

Introduced originally by:
commit f350a0a873
  "bridge: use rx_handler_data pointer to store net_bridge_port pointer"

Fixed but not in the best way by:
commit b5ed54e94d
  "bridge: fix RCU races with bridge port"

Reintroduced by:
commit 716ec052d2
  "bridge: fix NULL pointer deref of br_port_get_rcu"

Please apply to stable trees as well. Thanks.

RH bugzilla reference: https://bugzilla.redhat.com/show_bug.cgi?id=1025770

Reported-by: Laine Stump <laine@redhat.com>
Debugged-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 15:41:40 -05:00
Hannes Frederic Sowa
239c78db9c net: clear local_df when passing skb between namespaces
We must clear local_df when passing the skb between namespaces as the
packet is not local to the new namespace any more and thus may not get
fragmented by local rules. Fred Templin noticed that other namespaces
do fragment IPv6 packets while forwarding. Instead they should have send
back a PTB.

The same problem should be present when forwarding DF-IPv4 packets
between namespaces.

Reported-by: Templin, Fred L <Fred.L.Templin@boeing.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 23:42:38 -05:00
Eric W. Biederman
7f2cbdc28c tcp_memcontrol: Cleanup/fix cg_proto->memory_pressure handling.
kill memcg_tcp_enter_memory_pressure.  The only function of
memcg_tcp_enter_memory_pressure was to reduce deal with the
unnecessary abstraction that was tcp_memcontrol.  Now that struct
tcp_memcontrol is gone remove this unnecessary function, the
unnecessary function pointer, and modify sk_enter_memory_pressure to
set this field directly, just as sk_leave_memory_pressure cleas this
field directly.

This fixes a small bug I intruduced when killing struct tcp_memcontrol
that caused memcg_tcp_enter_memory_pressure to never be called and
thus failed to ever set cg_proto->memory_pressure.

Remove the cg_proto enter_memory_pressure function as it now serves
no useful purpose.

Don't test cg_proto->memory_presser in sk_leave_memory_pressure before
clearing it.  The test was originally there to ensure that the pointer
was non-NULL.  Now that cg_proto is not a pointer the pointer does not
matter.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 21:01:01 -05:00
wangweidong
78ac814f12 sctp: disable max_burst when the max_burst is 0
As Michael pointed out that when max_burst is 0, it just disable
max_burst. It declared in rfc6458#section-8.1.24. so add the check
in sctp_transport_burst_limited, when it 0, just do nothing.

Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Suggested-by: Michael Tuexen <Michael.Tuexen@lurchi.franken.de>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:55:54 -05:00
Jamal Hadi Salim
651a6493ae net_sched: Use default action walker methods
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:28:43 -05:00
Jamal Hadi Salim
382ca8a1ad net_sched: Provide default walker function for actions
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:28:42 -05:00
Jamal Hadi Salim
43c00dcf88 net_sched: Use default action lookup functions
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:28:42 -05:00
Jamal Hadi Salim
63ef617465 net_sched: Default action lookup method for actions
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:28:42 -05:00
Jamal Hadi Salim
76c82d7a3d net_sched: Fail if missing mandatory action operation methods
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:28:42 -05:00
Linus Torvalds
29be6345bb NFS client bugfixes
- Stable fix for a NFSv4.1 delegation and state recovery deadlock
 - Stable fix for a loop on irrecoverable errors when returning delegations
 - Fix a 3-way deadlock between layoutreturn, open, and state recovery
 - Update the MAINTAINERS file with contact information for Trond Myklebust
 - Close needs to handle NFS4ERR_ADMIN_REVOKED
 - Enabling v4.2 should not recompile nfsd and lockd
 - Fix a couple of compile warnings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSoLTpAAoJEGcL54qWCgDy2dgQAIKkKAXccg3OG2b1SxJmiaja
 PcrovNmgg3HvYQ7clUMqtrMByiXEpSybl6tAeXYUWE3sS1DISSBVEwO3MoOiASiM
 951Ssx+CoyhsHYo5aH83sUIiWFl/YsRhpKmSr2cdQd13DQTFbPq896k64Inf6L2/
 9fngoqOD7FunQHn8AiVPoDOQzObB0OuKhYCwuwLt47oPiwgmm12JQNCDxU1i4sxb
 lkGUBLkPMs6D5IyI8XHaMyX3+8MvmPiIsjIKaNJRdhkuX/k7ollucTJXyvyEQKK0
 PhBIWyUULmKcAXYwCfHf9UoyGZFvmj47YggyKcBd26OZUEFekcWrULfym46F1xak
 EcO6D4mlTy5i5W0RBqYCj1oGud57rixZBmhLTbeq6sSJaiqBfGEs225Q17H7rsEB
 YIghHiEFNnBmVWELhHxbJHQoY6HOugmZOuc0dxopaikN/7to8gnYoVyTIVlMfe/t
 UNXZoer6GOOohJGtZ7s7v4Al7EzvwnVnBCBklEAKFJ7Ca2LEmq+b58oQW3nJ1mPn
 y4TnihxYXsSEbqy+Lds9rumRhJLG1oVTpwficAm7N3HdK3abzCIPEt6iOHoCmXQz
 J1B4gmwOKsDqVlCSpBsnc3ZiBlSJGOn6MmVQUCNFpzv/DetWn/BxEUPE8cNm8DaI
 WioD0grC0/9bR8oD1m+w
 =UZ51
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 - Stable fix for a NFSv4.1 delegation and state recovery deadlock
 - Stable fix for a loop on irrecoverable errors when returning
   delegations
 - Fix a 3-way deadlock between layoutreturn, open, and state recovery
 - Update the MAINTAINERS file with contact information for Trond
   Myklebust
 - Close needs to handle NFS4ERR_ADMIN_REVOKED
 - Enabling v4.2 should not recompile nfsd and lockd
 - Fix a couple of compile warnings

* tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix do_div() warning by instead using sector_div()
  MAINTAINERS: Update contact information for Trond Myklebust
  NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery
  SUNRPC: do not fail gss proc NULL calls with EACCES
  NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED
  NFSv4: Update list of irrecoverable errors on DELEGRETURN
  NFSv4 wait on recovery for async session errors
  NFS: Fix a warning in nfs_setsecurity
  NFS: Enabling v4.2 should not recompile nfsd and lockd
2013-12-05 13:05:48 -08:00
John W. Linville
aa489f0f26 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-12-05 09:29:56 -05:00
Venkat Venkatsubra
18fc25c94e rds: prevent BUG_ON triggered on congestion update to loopback
After congestion update on a local connection, when rds_ib_xmit returns
less bytes than that are there in the message, rds_send_xmit calls
back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE)
to trigger.

For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually
the message contains 8240 bytes. rds_send_xmit thinks there is more to send
and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header)
=4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k].

The commit 6094628bfd
"rds: prevent BUG_ON triggering on congestion map updates" introduced
this regression. That change was addressing the triggering of a different
BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE:
 	BUG_ON(ret != 0 &&
    		 conn->c_xmit_sg == rm->data.op_nents);
This was the sequence it was going through:
(rds_ib_xmit)
/* Do not send cong updates to IB loopback */
if (conn->c_loopback
   && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) {
  	rds_cong_map_updated(conn->c_fcong, ~(u64) 0);
    	return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES;
}
rds_ib_xmit returns 8240
rds_send_xmit:
  c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time)
   		 = 8192
  c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again
rds_ib_xmit returns 8240
rds_send_xmit:
  c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again
  and so on (c_xmit_data_off 24672,32912,41152,49392,57632)
rds_ib_xmit returns 8240
On this iteration this sequence causes the BUG_ON in rds_send_xmit:
    while (ret) {
    	tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off);
    	[tmp = 65536 - 57632 = 7904]
    	conn->c_xmit_data_off += tmp;
    	[c_xmit_data_off = 57632 + 7904 = 65536]
    	ret -= tmp;
    	[ret = 8240 - 7904 = 336]
    	if (conn->c_xmit_data_off == sg->length) {
    		conn->c_xmit_data_off = 0;
    		sg++;
    		conn->c_xmit_sg++;
    		BUG_ON(ret != 0 &&
    			conn->c_xmit_sg == rm->data.op_nents);
    		[c_xmit_sg = 1, rm->data.op_nents = 1]

What the current fix does:
Since the congestion update over loopback is not actually transmitted
as a message, all that rds_ib_xmit needs to do is let the caller think
the full message has been transmitted and not return partial bytes.
It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb.
And 64Kb+48 when page size is 64Kb.

Reported-by: Josh Hunt <joshhunt00@gmail.com>
Tested-by: Honggang Li <honli@redhat.com>
Acked-by: Bang Nguyen <bang.nguyen@oracle.com>
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-03 11:54:18 -05:00
Kamala R
7150aede5d IPv6: Fixed support for blackhole and prohibit routes
The behaviour of blackhole and prohibit routes has been corrected by setting
the input and output pointers of the dst variable appropriately. For
blackhole routes, they are set to dst_discard and to ip6_pkt_discard and
ip6_pkt_discard_out respectively for prohibit routes.

ipv6: ip6_pkt_prohibit(_out) should not depend on
CONFIG_IPV6_MULTIPLE_TABLES

We need ip6_pkt_prohibit(_out) available without
CONFIG_IPV6_MULTIPLE_TABLES

Signed-off-by: Kamala R <kamala@aristanetworks.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-02 17:14:27 -05:00
François-Xavier Le Bail
57ec0afe29 ipv6: fix third arg of anycast_dst_alloc(), must be bool.
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-02 17:13:25 -05:00
Duan Jiong
30e56918dd ipv6: judge the accept_ra_defrtr before calling rt6_route_rcv
when dealing with a RA message, if accept_ra_defrtr is false,
the kernel will not add the default route, and then deal with
the following route information options. Unfortunately, those
options maybe contain default route, so let's judge the
accept_ra_defrtr before calling rt6_route_rcv.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-02 16:00:38 -05:00
John W. Linville
a59b40b30f Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2013-12-02 13:20:03 -05:00
Linus Torvalds
5fc92de3c7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller:
 "Here is a pile of bug fixes that accumulated while I was in Europe"

 1) In fixing kernel leaks to userspace during copying of socket
    addresses, we broke a case that used to work, namely the user
    providing a buffer larger than the in-kernel generic socket address
    structure.  This broke Ruby amongst other things.  Fix from Dan
    Carpenter.

 2) Fix regression added by byte queue limit support in 8139cp driver,
    from Yang Yingliang.

 3) The addition of MSG_SENDPAGE_NOTLAST buggered up a few sendpage
    implementations, they should just treat it the same as MSG_MORE.
    Fix from Richard Weinberger and Shawn Landden.

 4) Handle icmpv4 errors received on ipv6 SIT tunnels correctly, from
    Oussama Ghorbel.  In particular we should send an ICMPv6 unreachable
    in such situations.

 5) Fix some regressions in the recent genetlink fixes, in particular
    get the pmcraid driver to use the new safer interfaces correctly.
    From Johannes Berg.

 6) macvtap was converted to use a per-cpu set of statistics, but some
    code was still bumping tx_dropped elsewhere.  From Jason Wang.

 7) Fix build failure of xen-netback due to missing include on some
    architectures, from Andy Whitecroft.

 8) macvtap double counts received packets in statistics, fix from Vlad
    Yasevich.

 9) Fix various cases of using *_STATS_BH() when *_STATS() is more
    appropriate.  From Eric Dumazet and Hannes Frederic Sowa.

10) Pktgen ipsec mode doesn't update the ipv4 header length and checksum
    properly after encapsulation.  Fix from Fan Du.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  net/mlx4_en: Remove selftest TX queues empty condition
  {pktgen, xfrm} Update IPv4 header total len and checksum after tranformation
  virtio_net: make all RX paths handle erors consistently
  virtio_net: fix error handling for mergeable buffers
  virtio_net: Fixed a trivial typo (fitler --> filter)
  netem: fix gemodel loss generator
  netem: fix loss 4 state model
  netem: missing break in ge loss generator
  net/hsr: Support iproute print_opt ('ip -details ...')
  net/hsr: Very small fix of comment style.
  MAINTAINERS: Added net/hsr/ maintainer
  ipv6: fix possible seqlock deadlock in ip6_finish_output2
  ixgbe: Make ixgbe_identify_qsfp_module_generic static
  ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default
  ixgbe: ixgbe_fwd_ring_down needs to be static
  e1000: fix possible reset_task running after adapter down
  e1000: fix lockdep warning in e1000_reset_task
  e1000: prevent oops when adapter is being closed and reset simultaneously
  igb: Fixed Wake On LAN support
  inet: fix possible seqlock deadlocks
  ...
2013-12-02 10:09:07 -08:00
Simon Wunderlich
0834ae3c3a mac80211: check csa wiphy flag in ibss before switching
When external CSA IEs are received (beacons or action messages), a
channel switch is triggered as well. This should only be allowed on
devices which actually support channel switches, otherwise disconnect.
(For the corresponding userspace invocation, the wiphy flag is checked
in nl80211).

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02 11:54:13 +01:00
Simon Wunderlich
dda444d524 cfg80211: disable CSA for all drivers
The channel switch announcement code has some major locking problems
which can cause a deadlock in worst case. A series of fixes has been
proposed, but these are non-trivial and need to be tested first.
Therefore disable CSA completely for 3.13.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02 11:53:44 +01:00
fan.du
3868204d6b {pktgen, xfrm} Update IPv4 header total len and checksum after tranformation
commit a553e4a631 ("[PKTGEN]: IPSEC support")
tried to support IPsec ESP transport transformation for pktgen, but acctually
this doesn't work at all for two reasons(The orignal transformed packet has
bad IPv4 checksum value, as well as wrong auth value, reported by wireshark)

- After transpormation, IPv4 header total length needs update,
  because encrypted payload's length is NOT same as that of plain text.

- After transformation, IPv4 checksum needs re-caculate because of payload
  has been changed.

With this patch, armmed pktgen with below cofiguration, Wireshark is able to
decrypted ESP packet generated by pktgen without any IPv4 checksum error or
auth value error.

pgset "flag IPSEC"
pgset "flows 1"

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-01 20:33:52 -05:00
stephen hemminger
eff7979f00 netem: fix gemodel loss generator
Patch from developers of the alternative loss models, downloaded from:
   http://netgroup.uniroma2.it/twiki/bin/view.cgi/Main/NetemCLG

 "in case 2, of the switch we change the direction of the inequality to
  net_random()>clg->a3, because clg->a3 is h in the GE model and when h
  is 0 all packets will be lost."

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-30 12:49:29 -05:00
stephen hemminger
ab6c27be81 netem: fix loss 4 state model
Patch from developers of the alternative loss models, downloaded from:
   http://netgroup.uniroma2.it/twiki/bin/view.cgi/Main/NetemCLG

 "In the case 1 of the switch statement in the if conditions we
   need to add clg->a4 to clg->a1, according to the model."

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-30 12:49:28 -05:00