TTY layer expects 0 if the ldisc->open operation succeeded.
Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like other mobile broadband device ethernet interfaces, mark the LG
VL600 with the 'wwan' devtype so userspace knows it needs additional
configuration via the AT port before the interface can be used.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike the standard case, disabled anti replay detection needs some
nontrivial extra treatment on ESN. RFC 4303 states:
Note: If a receiver chooses to not enable anti-replay for an SA, then
the receiver SHOULD NOT negotiate ESN in an SA management protocol.
Use of ESN creates a need for the receiver to manage the anti-replay
window (in order to determine the correct value for the high-order
bits of the ESN, which are employed in the ICV computation), which is
generally contrary to the notion of disabling anti-replay for an SA.
So return an error if an ESN state with disabled anti replay detection
is inserted for now and add the extra treatment later if we need it.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As it is, we assign the outer modes output function to the dst entry
when we create the xfrm bundle. This leads to two problems on interfamily
scenarios. We might insert ipv4 packets into ip6_fragment when called
from xfrm6_output. The system crashes if we try to fragment an ipv4
packet with ip6_fragment. This issue was introduced with git commit
ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets
as needed). The second issue is, that we might insert ipv4 packets in
netfilter6 and vice versa on interfamily scenarios.
With this patch we assign the inner mode output function to the dst entry
when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner
mode is used and the right fragmentation and netfilter functions are called.
We switch then to outer mode with the output_finish functions.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 443457242b (factorize sync-rcu call in
unregister_netdevice_many) mistakenly removed one test from dev_close()
Following actions trigger a BUG :
modprobe bonding
modprobe dummy
ifconfig bond0 up
ifenslave bond0 dummy0
rmmod dummy
dev_close() must not close a non IFF_UP device.
With help from Frank Blaschka and Einar EL Lueck
Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reported-by: Einar EL Lueck <ELELUECK@de.ibm.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We occasionally see list corruption using libertas.
While we haven't been able to diagnose this precisely, we have spotted
a possible cause: cmdpendingq is generally modified with driver_lock
held. However, there are a couple of points where this is not the case.
Fix up those operations to execute under the lock, it seems like
the correct thing to do and will hopefully improve the situation.
Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We should not switch to non-IBSS channels when working in IBSS mode,
otherwise there are microcode errors, and after some time system
crashes.
This bug is only observable when software scan is used in IBSS mode,
so should be considered as regression after:
commit 0263aa4529
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue Mar 29 11:24:21 2011 +0200
iwl3945: disable hw scan by default
However IBSS mode check, which this patch add again, was removed by
commit b2f30e8bdd
Author: Johannes Berg <johannes.berg@intel.com>
Date: Thu Jan 21 07:32:20 2010 -0800
iwlwifi: remove IBSS channel sanity check
That commit claim that mac80211 will not use non-IBSS channel in IBSS
mode, what definitely is not true. Bug probably should be fixed in
mac80211, but that will require more work, so better to apply that patch
temporally, and provide proper mac80211 fix latter.
Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=34452
Reported-and-tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: stable@kernel.org # 2.6.38.5+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
during suspend/S3 state drv_flush is called from mac80211 irrespective of
interface count. In ath9k we queue a work in ath9k_flush which we expect
to be cancelled in the drv_stop call back. during suspend process mac80211
calls drv_stop only when the interface count(local->count) is non-zero.
unfortunately when the network manager is enabled, drv_flush is called
while drv_stop is not called as local->count reaches '0'.
So fix this by simply checking for the device presence in the
drv_flush call back in the driver before queueing work or anything else.
this patch fixes the following WARNING
Call Trace:
[<c014c6e2>] warn_slowpath_common+0x72/0xa0
[<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211]
[<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211]
[<c014c75b>] warn_slowpath_fmt+0x2b/0x30
[<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211]
[<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211]
[<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k]
[<c016399e>] run_workqueue+0x8e/0x150
[<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k]
[<c0163ae4>] worker_thread+0x84/0xe0
[<c0167a60>] ? autoremove_wake_function+0x0/0x50
[<c0163a60>] ? worker_thread+0x0/0xe0
[<c01677d4>] kthread+0x74/0x80
[<c0167760>] ? kthread+0x0/0x80
[<c0104087>] kernel_thread_helper+0x7/0x10
---[ end trace 2aff81010df9215b ]---
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When we are disconnecting, we set PS off, but this happens before we
send the deauth/disassoc request. When the deauth/disassoc frames are
sent, we trigger the dynamic ps timer, which then times out and turns
PS back on. Thus, PS remains on after disconnecting, causing problems
when associating again.
This can be fixed by preventing the timer to start when we're not
associated anymore.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: fix race condition in AIL push trigger
xfs: make AIL target updates and compares 32bit safe.
xfs: always push the AIL to the target
xfs: exit AIL push work correctly when AIL is empty
xfs: ensure reclaim cursor is reset correctly at end of AG
This fixes:
alchemy/xxs1500/init.c: In function 'prom_init':
alchemy/xxs1500/init.c:57:17: error: ignoring return value of 'kstrtoul', declared with attribute warn_unused_result
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2340/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
PAGE_SIZE >= 64kb (1 << 16) is too big to be the immediate of the
addiu/daddiu instruction, so, use addu/daddu instruction instead.
The following compiling error is fixed:
AS arch/mips/power/hibernate.o
arch/mips/power/hibernate.S: Assembler messages:
arch/mips/power/hibernate.S:38: Error: expression out of range
make[2]: *** [arch/mips/power/hibernate.o] Error 1
make[1]: *** [arch/mips/power] Error 2
Reported-by: Roman Mamedov <rm@romanrm.ru>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2313/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The code for supporting one-shot mode for the clockevent is already there,
only the feature flag was not set. Setting the one-shot flag allows the
kernel to run in tickless mode.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2261/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/jz4740/dma.o
arch/mips/jz4740/dma.c: In function 'jz4740_dma_chan_irq':
arch/mips/jz4740/dma.c:245:11: error: variable 'status' set but not used [-Werro
r=unused-but-set-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
HOSTCC arch/mips/boot/compressed/calc_vmlinuz_load_addr
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c: In function 'main':
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:35:2: warning: format '%llx' expects type 'long long unsigned int *', but argument 3 has type 'uint64_t *'
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:54:2: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/alchemy/devboards/db1x00/board_setup.o
arch/mips/alchemy/devboards/db1x00/board_setup.c: In function 'board_setup':
arch/mips/alchemy/devboards/db1x00/board_setup.c:130:6: error: variable 'pin_func' set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sgi-ip27/ip27-hubio.o
arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map':
arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sgi-ip27/ip27-hubio.o
arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map':
arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Instead of making each Octeon specific option depend on
CPU_CAVIUM_OCTEON, gate the body of the entire file with
CPU_CAVIUM_OCTEON. With this change, CAVIUM_OCTEON_SPECIFIC_OPTIONS
becomes useless, so get rid of it as well.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2091/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Octeon doesn't use IRQ_CPU, so don't select it.
IRQ_CPU_OCTEON is a completely unused symbol, remove it completely.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2086/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/loongson/common/env.o
arch/mips/loongson/common/env.c: In function 'prom_init_env':
arch/mips/loongson/common/env.c:50:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable]
arch/mips/loongson/common/env.c:51:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable]
arch/mips/loongson/common/env.c:52:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable]
arch/mips/loongson/common/env.c:53:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/jazz/jazzdma.o
arch/mips/jazz/jazzdma.c: In function 'vdma_remap':
arch/mips/jazz/jazzdma.c:214:20: error: variable 'npages' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sni/time.o
arch/mips/sni/time.c: In function 'dosample':
arch/mips/sni/time.c:98:19: error: variable 'lsb' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/mti-malta/malta-int.o
arch/mips/mti-malta/malta-int.c: In function 'mips_pcibios_iack':
arch/mips/mti-malta/malta-int.c:59:6: error: variable 'dummy' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/mti-malta/malta-init.o
arch/mips/mti-malta/malta-init.c: In function 'prom_init':
arch/mips/mti-malta/malta-init.c:196:6: error: variable 'result' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sgi-ip22/ip22-platform.o
arch/mips/sgi-ip22/ip22-platform.c: In function 'sgiseeq_devinit':
arch/mips/sgi-ip22/ip22-platform.c:135:15: error: variable 'tmp' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
While at it rename the variable to pbdma for readability; there is a
local variable tmp of different type being used in two nested blocks.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sgi-ip22/ip22-time.o
arch/mips/sgi-ip22/ip22-time.c: In function 'dosample':
arch/mips/sgi-ip22/ip22-time.c:35:10: error: variable 'lsb' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/mm/tlbex.o
arch/mips/mm/tlbex.c: In function 'build_r4000_tlb_refill_handler':
arch/mips/mm/tlbex.c:1155:22: error: variable 'vmalloc_mode' set but not used [-Werror=unused-but-set-variable]
arch/mips/mm/tlbex.c:1154:28: error: variable 'htlb_info' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/mm/c-r4k.o
arch/mips/mm/c-r4k.c: In function 'probe_scache':
arch/mips/mm/c-r4k.c:1078:6: error: variable 'tmp' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Older GCC versions didn't warn about the unused variable tmp because it was
getting initialized.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The current code is abusing the uasm interface by passing jump target
addresses with high bits set. Mask the addresses to avoid annoying
messages at boot time.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1922/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some cases (e.g. ecryptfs) can call ->dentry_revalidate with NULL
nameidata.
https://bugzilla.kernel.org/show_bug.cgi?id=34732
Tyler Hicks pointed out that this bug was introduced by commit
e7c0a16786 "fuse: make fuse_dentry_revalidate() RCU aware"
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Processes started with kernel_execve from a kernel thread will have
current->mm==NULL. Reading current->mm->context.alloc_pgste will
read a more or less random bit from lowcore in this case. If the
bit turns out to be set the whole process tree started this way
will allocate page table extensions although they have no need
for it.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
oprofile_min_interval and oprofile_max_interval are unsigned, checking
for negative values doesn't work. Change hwsampler_query_min_interval
and hwsampler_query_max_interval to return an unsigned long and
check for a zero value instead.
Reported-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently the diag10() function can only release one page. For exploiters
that have to call diag10 on a contiguous memory region this is suboptimal.
This patch replaces the diag10() function with diag10_range() that is
able to release multiple pages. In addition to that the new function now
allows to release memory with addresses higher than 2047 MiB. This was
due to a restriction of the diagnose implementation under z/VM prior to
release 5.2.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch/s390/kvm/sie64a.S uses the b280 instruction. Tell the builtin
disassembler to handle that code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When starting a new CPU we currently jump to start_secondary() without
setting register 14 (the return address) correctly. Therefore on the stack
frame for start_secondary an invalid return address is stored. This leads
to wrong stack back traces in kernel dumps.
Example:
#00 [1f33fe48] cpu_idle at 10614a
#01 [1f33fe90] start_secondary at 54fa88
#02 [1f33feb8] (null) at 0 <--- invalid
To fix this start_secondary() is called now with basr/brasl that sets
register 14 correctly. The output of the stack backtrace looks then
like the following:
#00 [1f33fe48] cpu_idle at 10614a
#01 [1f33fe90] start_secondary at 54fa88
#02 [1f33feb8] restart_base at 54f41e <--- correct
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The termination of running CQR caused by reserve/release operations
may lead to an IO error if reserve/release is done in a tight loop.
Prevent this by increasing the retry counter after termination.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix initial usecount of attached and assigned storage increments so
they can be set offline.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
