There is no pci_cfg_access_unlocked(). I think the author meant
pci_cfg_access_unlock().
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Currently devm_request_irq() is being called before base, PCI fields of
dra7xx_pcie structure are populated. It is called even before
pm_runtime_enable() and pm_runtime_get_sync() are called. This will lead
to exceptions if in case an interrupt is triggered before the all of the
above are done. Hence push the devm_request_irq() call to the end of the
probe.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
No functional change. Rename dw_pcie_writel_unroll/dw_pcie_readl_unroll to
dw_pcie_writel_ob_unroll/dw_pcie_readl_ob_unroll respectively as these
functions are used to perform only outbound configurations. Also move
these _unroll configurations to a separate function.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously dbi accessors can be used to access data of size 4 bytes. But
there might be situations (like accessing MSI_MESSAGE_CONTROL in order to
set/get the number of required MSI interrupts in EP mode) where dbi
accessors must be used to access data of size 2. This is in preparation
for adding endpoint mode support to designware driver.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
dwc has 2 dbi address space labeled dbics and dbics2. The existing helper
to access dbi address space can access only dbics. However dbics2 has to
be accessed for programming the BAR registers in the case of EP mode. This
is in preparation for adding EP mode support to dwc driver.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Populate cpu_addr_fixup ops to extract the least 28 bits of the
corresponding CPU address.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Populate cpu_addr_fixup ops to extract the least 28 bits of the
corresponding CPU address.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Some platforms (like dra7xx) require only the least 28 bits of the
corresponding 32 bit CPU address to be programmed in the address
translation unit. This modified address is stored in io_base/mem_base/
cfg0_base/cfg1_base in dra7xx_pcie_host_init(). While this is okay for
host mode where the address range is fixed, device mode requires different
addresses to be programmed based on the host buffer address. Add a new
ops to get the least 28 bits of the corresponding 32 bit CPU address and
invoke it before programming the address translation unit.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
The bug is that "val" is unsigned long but we only initialize 32 bits of
it. Then we test "if (val)" and that might be true not because we set the
bits but because some were never initialized.
Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use "continue" to skip rest of the loop when possible to save an indent
level. No functional change intended.
Suggested-by: walter harms <wharms@bfs.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Fix a crash from dereferencing a NULL dw_pcie_ops pointer. For example,
on ARTPEC-6:
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = c0204000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-next-20170321 #1
Hardware name: Axis ARTPEC-6 Platform
task: db098000 task.stack: db096000
PC is at dw_pcie_writel_dbi+0x2c/0xd0
Prior to 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into
host-only and core structures"), every driver had a struct pcie_host_ops
with function pointers, typically used as:
if (pp->ops->readl_rc)
return pp->ops->readl_rc(...);
442ec4c04d12 split struct pcie_host_ops into two pieces: struct
dw_pcie_host_ops and struct dw_pcie_ops, so the above became:
if (pci->ops->readl_dbi)
return pci->ops->readl_dbi(...);
But pcie-artpec6.c and pcie-designware-plat.c don't need the dw_pcie_ops
pointers and didn't supply a pci->ops struct, which leads to NULL pointer
dereferences.
Supply an empty struct dw_pcie_ops to avoid the NULL pointer dereferences.
[bhelgaas: changelog]
Fixes: 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Without PCI_HOST_COMMON support enabled, we get a link error:
drivers/pci/dwc/built-in.o: In function `hisi_pcie_map_bus':
pcie-hisi.c:(.text+0x8860): undefined reference to `pci_ecam_map_bus'
drivers/pci/dwc/built-in.o: In function `hisi_pcie_almost_ecam_probe':
pcie-hisi.c:(.text+0x88b4): undefined reference to `pci_host_common_probe'
Add an explicit 'select', as the other users have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Rockchip Root Ports support either 64 or 128 byte Read Completion Boundary
(RCB). Set the RCB bit in the Link Control register to indicate this.
A 128 byte RCB significantly improves performance of NVMe with libaio.
[bhelgaas: changelog]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Per Intel Specification Update 335553-002 (see link below), some 82579
network adapters advertise a Function Level Reset (FLR) capability, but
they can hang when an FLR is triggered.
To reproduce the problem, attach the device to a VM, then detach and try to
attach again.
Add a quirk to prevent the use of FLR on these devices.
[bhelgaas: changelog, comments]
Link: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/82579lm-82579v-gigabit-network-connection-spec-update.pdf
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
SZ_16M PEM resource size includes PEM-specific register and its children
resources. Reservation of the whole SZ_16M range leads to child device
driver failure when pcieport driver is requesting resources:
pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed
So we cannot reserve full 16M here and instead we want to reserve
PEM-specific register only which is SZ_64K.
At the end increase PEM resource to SZ_16M since this is what
thunder_pem_init() call expects for proper initialization.
Fixes: 9abb27c7594a ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller")
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.10+
Only apply the Cavium ACS quirk to devices with ID in the range
0xa000-0xa0ff. These are the on-chip PCI devices for CN81xx/CN83xx/CN88xx.
Fixes: b404bcfbf035 ("PCI: Add ACS quirk for all Cavium devices")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Manish Jaggi <mjaggi@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Detect on probe whether a PCI device is part of a Thunderbolt controller.
Intel uses a Vendor-Specific Extended Capability (VSEC) with ID 0x1234
on such devices. Detect presence of this VSEC and cache it in a newly
added is_thunderbolt bit in struct pci_dev.
Also, add a helper to check whether a given PCI device is situated on a
Thunderbolt daisy chain (i.e., below a PCI device with is_thunderbolt
set).
The necessity arises from the following:
* If an external Thunderbolt GPU is connected to a dual GPU laptop,
that GPU is currently registered with vga_switcheroo even though it
can neither drive the laptop's panel nor be powered off by the
platform. To vga_switcheroo it will appear as if two discrete
GPUs are present. As a result, when the external GPU is runtime
suspended, vga_switcheroo will cut power to the internal discrete GPU
which may not be runtime suspended at all at this moment. The
solution is to not register external GPUs with vga_switcheroo, which
necessitates a way to recognize if they're on a Thunderbolt daisy
chain.
* Dual GPU MacBook Pros introduced 2011+ can no longer switch external
DisplayPort ports between GPUs. (They're no longer just used for DP
but have become combined DP/Thunderbolt ports.) The driver to switch
the ports, drivers/platform/x86/apple-gmux.c, needs to detect presence
of a Thunderbolt controller and, if found, keep external ports
permanently switched to the discrete GPU.
v2: Make kerneldoc for pci_is_thunderbolt_attached() more precise,
drop portion of commit message pertaining to separate series.
(Bjorn Helgaas)
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Amir Levy <amir.jer.levy@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/0ab165a4a35c0b60f29d4c306c653ead14fcd8f9.1489145162.git.lukas@wunner.de
If the PCI device is disconnected, return false immediately from
pci_device_is_present(). pci_device_is_present() uses the bus accessors,
so the early return in the device accessors doesn't help here.
Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
Check the device connected state prior to executing device shutdown
operations or writing MSI messages so that tear down on disconnected
devices completes quicker.
Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
If we've detected the PCI device is disconnected, there is no need to
attempt to access its config space since we know the operation will fail.
Make all the config reads and writes return -ENODEV error immediately when
in such a state.
If a caller requests a config read to a disconnected device, return a data
value of all 1's. This is the same as what hardware is expected to return
when accessing a removed device, but software can do this faster without
relying on hardware.
Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
Add a new state to pci_dev to be set when it is unexpectedly disconnected.
The PCI driver tear down functions can observe this new device state so
they may skip operations that will fail.
The pciehp and pcie-dpc drivers are aware when the link is down, so these
set the flag when their handlers detect the device is disconnected.
Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
Replace the inline PCI device config read and write accessors with exported
functions. This is preparing for these functions to make use of private
data.
Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
It seems on later Armada 38x, the slot clock configuration bit is not
read-only, but can be written. This means that our RW1C protection ends up
clearing this bit when the link control register is written.
Adjust the mask so that we only avoid writing '1' bits to the RW1C bits of
this register (bits 15 and 14 of the link status) rather than masking out
all the status register bits.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a host bridge driver for the Faraday Technology FPPCI100 host bridge,
used for Cortina Systems Gemini SoC (SL3516) PCI Host Bridge.
This code is inspired by the out-of-tree OpenWRT patch and then extensively
rewritten for device tree and using the modern helpers to cut down and
modernize the code to all new PCI frameworks. A driver exists in U-Boot as
well.
Tested on the ITian Square One SQ201 NAS with the following result in the
boot log (trimmed to relevant parts):
OF: PCI: host bridge /soc/pci@50000000 ranges:
OF: PCI: IO 0x50000000..0x500fffff -> 0x00000000
OF: PCI: MEM 0x58000000..0x5fffffff -> 0x58000000
ftpci100 50000000.pci: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0x58000000-0x5fffffff]
ftpci100 50000000.pci:
DMA MEM1 BASE: 0x0000000000000000 -> 0x0000000007ffffff config 00070000
ftpci100 50000000.pci:
DMA MEM2 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000
ftpci100 50000000.pci:
DMA MEM3 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
pci 0000:00:0c.0: BAR 0: assigned [mem 0x58000000-0x58007fff]
pci 0000:00:09.2: BAR 0: assigned [mem 0x58008000-0x580080ff]
pci 0000:00:09.0: BAR 4: assigned [io 0x1000-0x101f]
pci 0000:00:09.1: BAR 4: assigned [io 0x1020-0x103f]
pci 0000:00:09.0: enabling device (0140 -> 0141)
pci 0000:00:09.0: HCRESET not completed yet!
pci 0000:00:09.1: enabling device (0140 -> 0141)
pci 0000:00:09.1: HCRESET not completed yet!
pci 0000:00:09.2: enabling device (0140 -> 0142)
rt61pci 0000:00:0c.0: enabling device (0140 -> 0142)
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected -
rt: 2561, rf: 0003, rev: 000c
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:09.2: EHCI Host Controller
ehci-pci 0000:00:09.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:09.2: irq 125, io mem 0x58008000
ehci-pci 0000:00:09.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:09.0: UHCI Host Controller
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:09.0: HCRESET not completed yet!
uhci_hcd 0000:00:09.0: irq 123, io base 0x00001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
uhci_hcd 0000:00:09.1: UHCI Host Controller
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:09.1: HCRESET not completed yet!
uhci_hcd 0000:00:09.1: irq 124, io base 0x00001020
hub 3-0:1.0: USB hub found
hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
scsi 0:0:0:0: Direct-Access USB Flash Disk 1.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 7900336 512-byte logical blocks: (4.04 GB/3.77 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI removable disk
ieee80211 phy0: rt2x00lib_request_firmware: Info -
Loading firmware file 'rt2561s.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info -
Firmware detected - version: 0.8
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
$ lspci
00:00.0 Class 0600: 159b:4321
00:09.2 Class 0c03: 1106:3104
00:09.0 Class 0c03: 1106:3038
00:09.1 Class 0c03: 1106:3038
00:0c.0 Class 0280: 1814:0301
$ cat /proc/interrupts
CPU0
123: 0 PCI 0 Edge uhci_hcd:usb2
124: 0 PCI 1 Edge uhci_hcd:usb3
125: 159 PCI 2 Edge ehci_hcd:usb1
126: 1082 PCI 3 Edge rt61pci
$ cat /proc/iomem
50000000-500000ff : /soc/pci@50000000
58000000-5fffffff : Gemini PCI MEM
58000000-58007fff : 0000:00:0c.0
58000000-58007fff : 0000:00:0c.0
58008000-580080ff : 0000:00:09.2
58008000-580080ff : ehci_hcd
The EHCI USB hub works fine; I can mount and manage files and the IRQs just
keep ticking up. I can issue iwlist wlan0 scanning and see all the WLANs
here. I don't have wpa_supplicant so have not tried connecting to them.
[bhelgaas: fold in %pap change from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Janos Laube <janos.dev@gmail.com>
CC: Paulius Zaleckas <paulius.zaleckas@gmail.com>
CC: Hans Ulli Kroll <ulli.kroll@googlemail.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: Feng-Hsin Chiang <john453@faraday-tech.com>
CC: Greentime Hu <green.hu@gmail.com>
A PCI_EJECT message can arrive at the same time we are calling
pci_scan_child_bus() in the workqueue for the previous PCI_BUS_RELATIONS
message or in create_root_hv_pci_bus(). In this case we could potentially
modify the bus from multiple places.
Properly lock the bus access.
Thanks Dexuan Cui <decui@microsoft.com> for pointing out the race condition
in create_root_hv_pci_bus().
Reported-by: Xiaofeng Wang <xiaofwan@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
hv_pci_devices_present() is called in hv_pci_remove() when we remove a PCI
device from the host, e.g., by disabling SR-IOV on a device. In
hv_pci_remove(), the bus is already removed before the call, so we don't
need to rescan the bus in the workqueue scheduled from
hv_pci_devices_present().
By introducing bus state hv_pcibus_removed, we can avoid this situation.
Reported-by: Xiaofeng Wang <xiaofwan@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
There's no way to get here with 'err != 0'. Just return 0 to be more
obvious and prevent future changes from accidentally erroring out here
without going through the right error paths.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If regulator_get_current_limit() returns 0 or error, return early so the
body of the function doesn't have to be indented as the body of an "if"
statement. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
During early days of PCI quirks support, ThunderX firmware did not provide
PNP0c02 node with PCI configuration space and PEM-specific register ranges.
This means that for legacy FW we are not reserving these resources and
cannot gather PEM-specific resources for further PEM initialization.
To support already deployed legacy FW, calculate PEM-specific ranges and
provide resources reservation as fallback scenario into PEM driver when we
could not gather PEM reg base from ACPI tables.
Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Robert Richter <rrichter@cavium.com>
CC: stable@vger.kernel.org # v4.10+
"CAV" is the only PNP/ACPI hardware ID vendor prefix assigned to Cavium so
fix this as it should be from day one.
Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller")
Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Robert Richter <rrichter@cavium.com>
CC: stable@vger.kernel.org # v4.10+
regulator_get_current_limit() can return negative error codes. We saved
the return value in an unsigned "curr", and a subsequent check interpreted
a negative error code as a positive (invalid) current limit.
Save the return code as a signed value, which avoids messages like this,
seen on Samsung Chromebook Plus:
rockchip-pcie f8000000.pcie: invalid power supply
[bhelgaas: changelog]
Fixes: 4816c4c7b82b ("PCI: rockchip: Provide captured slot power limit and scale")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Use dev_printk() when possible. This makes messages more consistent with
other device-related messages and, in some cases, adds useful information.
This changes messages like this:
Unable to allocate affinity masks, ignoring
to this:
pci 0000:01:00.0: can't allocate MSI affinity masks for 4 vectors
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2+ PCI devices fail to be discovered due to each bus having the same PCI
domain. This is because the domain defined in the device tree file is not
being added due to PCI_DOMAIN not being enabled. So, every PCI bus has a
domain of zero. When PCI_DOMAIN is selected by the Kconfig, it picks up
the domain defined in the device tree file and everything works as
expected.
Since both PCIE_IPROC_PLATFORM and PCIE_IPROC_BCMA need PCI_DOMAIN, move
it to PCIE_IPROC so it will be automatically selected for both.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Since commit fcc392d501bd2 ("irqchip/armada-370-xp: Use the generic MSI
infrastructure"), the irqchip driver used on Armada 370, XP, 375, 38x, 39x
for the MPIC interrupt controller has been converted to use the generic MSI
infrastructure.
Since this commit, it is no longer registering an msi_controller structure
with the of_pci_msi_chip_add() function. Therefore, having the PCI driver
used on the same platform calling of_pci_find_msi_chip_by_node() is pretty
useless.
The MSI resolution is now done in the generic interrupt resolution code,
since the MSI controller is an irq domain attached to the interrupt
controller node, which is pointed to by the msi-parent DT property in the
PCIe controller node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
The MSI support introduced with the initial Aardvark driver was based
on the msi_controller structure and the of_pci_msi_chip_add() /
of_pci_find_msi_chip_by_node() API, which are being deprecated in
favor of the generic MSI support.
Update the Aardvark driver to use the generic MSI support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
msleep() still sleeps 1 jiffy even when told to sleep for zero
milliseconds. That can end up being 1-2 milliseconds or more. In the
cases of d3_delay and d3cold_delay, that unnecessarily increases suspend
and/or resume latencies.
Do not sleep at all for the respective cases if d3_delay is zero or
d3cold_delay is zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pci_bus_type .shutdown method, pci_device_shutdown(), is called from
device_shutdown() in the kernel restart and shutdown paths.
Previously, pci_device_shutdown() called pci_msi_shutdown() and
pci_msix_shutdown(). This disables MSI and MSI-X, which causes the device
to fall back to raising interrupts via INTx. But the driver is still bound
to the device, it doesn't know about this change, and it likely doesn't
have an INTx handler, so these INTx interrupts cause "nobody cared"
warnings like this:
irq 16: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1
Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/
...
The MSI disabling code was added by d52877c7b1af ("pci/irq: let
pci_device_shutdown to call pci_msi_shutdown v2") because a driver left MSI
enabled and kdump failed because the kexeced kernel wasn't prepared to
receive the MSI interrupts.
Subsequent commits 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even
if kernel doesn't support MSI") and e80e7edc55ba ("PCI/MSI: Initialize MSI
capability for all architectures") changed the kexeced kernel to disable
all MSIs itself so it no longer depends on the crashed kernel to clean up
after itself.
Stop disabling MSI/MSI-X in pci_device_shutdown(). This resolves the
"nobody cared" unhandled IRQ issue above. It also allows PCI serial
devices, which may rely on the MSI interrupts, to continue outputting
messages during reboot/shutdown.
[bhelgaas: changelog, drop pci_msi_shutdown() and pci_msix_shutdown() calls
altogether]
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=187351
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Arcari <darcari@redhat.com>
CC: Myron Stowe <mstowe@redhat.com>
CC: Lukas Wunner <lukas@wunner.de>
CC: Keith Busch <keith.busch@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
The host bridge memory window resource is inserted into the iomem_resource
tree and cannot be deallocated until the host bridge itself is removed.
Previously, the window was on the stack, which meant the iomem_resource
entry pointed into the stack and was corrupted as soon as the probe
function returned, which caused memory corruption and errors like this:
pcie_iproc_bcma bcma0:8: resource collision: [mem 0x40000000-0x47ffffff] conflicts with PCIe MEM space [mem 0x40000000-0x47ffffff]
Move the memory window resource from the stack into struct iproc_pcie so
its lifetime matches that of the host bridge.
Fixes: c3245a566400 ("PCI: iproc: Request host bridge window resources")
Reported-and-tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.8+
We call pcie_aspm_exit_link_state() when we remove a device. If the device
is the last PCIe function to be removed below a bridge and the bridge has
an ASPM link_state struct, we disable ASPM on the link. Disabling ASPM
requires link->downstream (used in pcie_config_aspm_link()).
We previously set link->downstream in pcie_aspm_cap_init(), but only if the
device was not blacklisted. Removing the blacklisted device caused a NULL
pointer dereference in the pcie_aspm_exit_link_state() ->
pcie_config_aspm_link() path:
# echo 1 > /sys/bus/pci/devices/0000\:0b\:00.0/remove
...
BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
IP: pcie_config_aspm_link+0x5d/0x2b0
Call Trace:
pcie_aspm_exit_link_state+0x75/0x130
pci_stop_bus_device+0xa4/0xb0
pci_stop_and_remove_bus_device_locked+0x1a/0x30
remove_store+0x50/0x70
dev_attr_store+0x18/0x30
sysfs_kf_write+0x44/0x60
kernfs_fop_write+0x10e/0x190
__vfs_write+0x28/0x110
? rcu_read_lock_sched_held+0x5d/0x80
? rcu_sync_lockdep_assert+0x2c/0x60
? __sb_start_write+0x173/0x1a0
? vfs_write+0xb3/0x180
vfs_write+0xc4/0x180
SyS_write+0x49/0xa0
do_syscall_64+0xa6/0x1c0
entry_SYSCALL64_slow_path+0x25/0x25
---[ end trace bd187ee0267df5d9 ]---
To avoid this, set link->downstream in alloc_pcie_link_state(), so every
pcie_link_state structure has a valid link->downstream pointer.
[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rajat Jain <rajatja@google.com>
CC: stable@vger.kernel.org
Even when using the PHY framework, we need the elbi_base. Before this
patch, we didn't initialize elbi_base, which caused NULL pointer
dereferences later.
Fixes: e7cd7ef58e1f ("PCI: exynos: Support the PHY generic framework")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Microsemi's "Switchtec" line of PCI switch devices is already well
supported by the kernel with standard PCI switch drivers. However, the
Switchtec device advertises a special management endpoint with a separate
PCI function address and class code. This endpoint enables some additional
functionality which includes:
* Packet and Byte Counters
* Switch Firmware Upgrades
* Event and Error logs
* Querying port link status
* Custom user firmware commands
Add a switchtec kernel module which provides PCI driver that exposes a char
device. The char device provides userspace access to this interface
through read, write and (optionally) poll calls.
A userspace tool and library which utilizes this interface is available
at [1]. This tool takes inspiration (and borrows some code) from
nvme-cli [2]. The tool is largely complete at this time but additional
features may be added in the future.
[1] https://github.com/sbates130272/switchtec-user
[2] https://github.com/linux-nvme/nvme-cli
[Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes]
[Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix
switchtec_dev_open() error handling]
Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Stephen Bates <stephen.bates@microsemi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wei Zhang <wzhang@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hgdy
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix NULL pointer dereferences in many DesignWare-based drivers due to
refactoring error
- fix Altera config write breakage due to my refactoring error
* tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: altera: Fix TLP_CFG_DW0 for TLP write
PCI: dwc: Fix crashes seen due to missing assignments
Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
issues, or parts that were waiting for acks to come in. This pull
request contains:
- Allocation of nvme queues on the right node from Shaohua.
This was ready long before the merge window, but waiting on an ack
from Bjorn on the PCI bit. Now that we have that, the three patches
can go in.
- Two fixes for blk-mq-sched with nvmeof, which uses hctx specific
request allocations. This caused an oops. One part from Sagi, one
part from Omar.
- A loop partition scan deadlock fix from Omar, fixing a regression
in this merge window.
- A three-patch series from Keith, closing up a hole on clearing out
requests on shutdown/resume.
- A stable fix for nbd from Josef, fixing a leak of sockets.
- Two fixes for a regression in this window from Jan, fixing a
problem with one of his earlier patches dealing with queue vs bdi
life times.
- A fix for a regression with virtio-blk, causing an IO stall if
scheduling is used. From me.
- A fix for an io context lock ordering problem. From me"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Move bdi_unregister() to del_gendisk()
blk-mq: ensure that bd->last is always set correctly
block: don't call ioc_exit_icq() with the queue lock held for blk-mq
block: Initialize bd_bdi on inode initialization
loop: fix LO_FLAGS_PARTSCAN hang
nvme: Complete all stuck requests
blk-mq: Provide freeze queue timeout
blk-mq: Export blk_mq_freeze_queue_wait
nbd: stop leaking sockets
blk-mq: move update of tags->rqs to __blk_mq_alloc_request()
blk-mq: kill blk_mq_set_alloc_data()
blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request
blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset
nvme: allocate nvme_queue in correct node
PCI: add an API to get node from vector
blk-mq: allocate blk_mq_tags and requests in correct node
Next patch will use the API to get the node from vector for nvme device
Signed-off-by: Shaohua Li <shli@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Highlights include:
- An update of the disassembly code used by xmon to the latest versions in
binutils. We've received permission from all the authors of the relevant
binutils changes to relicense their changes to the relevant files from GPLv3
to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg
work to get permission from everyone.
- Addition of the "architected" Power9 CPU table entry, allowing us to boot
in Power9 architected mode under a hypervisor.
- Updates to the Power9 PMU code.
- Implementation of clear_bit_unlock_is_negative_byte() to optimise
unlock_page().
- Freescale updates from Scott: "Highlights include 8xx breakpoints and perf,
t1042rdb display support, and board updates."
Thanks to:
Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller,
Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney,
Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rspd
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"Highlights include:
- an update of the disassembly code used by xmon to the latest
versions in binutils. We've received permission from all the
authors of the relevant binutils changes to relicense their changes
to the relevant files from GPLv3 to GPLv2, for inclusion in Linux.
Thanks to Peter Bergner for doing the leg work to get permission
from everyone.
- addition of the "architected" Power9 CPU table entry, allowing us
to boot in Power9 architected mode under a hypervisor.
- updates to the Power9 PMU code.
- implementation of clear_bit_unlock_is_negative_byte() to optimise
unlock_page().
- Freescale updates from Scott: "Highlights include 8xx breakpoints
and perf, t1042rdb display support, and board updates."
Thanks to:
Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas
Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan,
Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter
Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil
Mehta, Stewart Smith"
* tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
powerpc: Remove leftover cputime_to_nsecs call causing build error
powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU
powerpc/optprobes: Fix TOC handling in optprobes trampoline
powerpc/pseries: Advertise Hot Plug Event support to firmware
cxl: fix nested locking hang during EEH hotplug
powerpc/xmon: Dump memory in CPU endian format
powerpc/pseries: Revert 'Auto-online hotplugged memory'
powerpc/powernv: Make PCI non-optional
powerpc/64: Implement clear_bit_unlock_is_negative_byte()
powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()
powerpc/kernel: Remove error message in pcibios_setup_phb_resources()
powerpc/mm: Fix typo in set_pte_at()
pci/hotplug/pnv-php: Disable MSI and PCI device properly
pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
powerpc: Add POWER9 architected mode to cputable
powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
powerpc/perf: Avoid FAB_*_MATCH checks for power9
powerpc/perf: Add restrictions to PMC5 in power9 DD1
powerpc/perf: Use Instruction Counter value
...
eb5767122feb ("PCI: altera: Simplify TLB_CFG_DW0 usage") used
TLP_FMTTYPE_CFGRD* (instead of TLP_FMTTYPE_CFGWR*) for TLP writes, which
causes writing to configuration space to fail. Fix it by using correct
FMTTYPE for write operation.
Fixes: eb5767122feb ("PCI: altera: Simplify TLB_CFG_DW0 usage")
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.9+
