This makes it a little easier to follow what is happening in debugfs.
Additionally is also useful in facilitating work to add autodisable
muxes because the control name is already used for the mux widget and
thus shouldn't be reused for the autodisable widget.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The memory subsystem is pretty chatty on failure no need to have local
OOM messages as well.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
All drivers have the same line at the end of the set_bias_level callback to
update the bias_level state. Move this update into
snd_soc_dapm_force_bias_level() and remove them from the drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently drivers are responsible for managing the bias_level field of
their DAPM context. The DAPM state itself is managed by the DAPM core
though and the core has certain expectations on how and when the bias_level
field should be updated. If drivers don't adhere to these undefined
behavior can occur.
This patch adds a few helper functions for manipulating the DAPM context
state, each function with a description on when it should be used and what
its effects are. This will also help us to move more of the bias_level
management from drivers to the DAPM core.
For convenience also add snd_soc_codec_* wrappers around these helpers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the registration of a debugfs directory fails this is treated as a
non-fatal error in ASoC and operation continues as normal. This means we
need to be careful and check if the parent debugfs directory exists if we
try to register a debugfs file or sub-directory. Otherwise we might end up
passing NULL for the parent and the file or directory will be registered in
the top-level debugfs directory.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit c66150824b ("ASoC: dapm: add code to configure dai link
parameters") introduced the following build warning:
sound/soc/soc-dapm.c: In function 'snd_soc_dapm_new_pcm':
sound/soc/soc-dapm.c:3389:4: warning: passing argument 1 of 'snprintf'
discards 'const' qualifier from pointer target type
snprintf(w_param_text[count], len,
This patch fixes this by switching to using devm_kasprintf. This also
saves a couple of lines of code.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dai-link params for codec-codec links were fixed. The fixed
link between codec and another chip which may be another codec,
baseband, bluetooth codec etc may require run time configuaration
changes. This change provides an optional alsa control to select
one of the params from a list of params.
Signed-off-by: Nikesh Oswal <nikesh@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_codec() is a extremely simple function and inlining it
typically results in less code than necessary for calling the non-inlined
version of the function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of calling device_create_file() manually, assign the static
attribute group entries at the device registration. This simplifies
the error handling and avoids the possible races.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no more users of this field left so it can finally be removed.
New users should use snd_soc_dapm_to_codec(w->dapm);
The reason why it is removed is because it doesn't fit to well anymore in
the componentized ASoC hierarchy, where DAPM works on the snd_soc_component
level. And the alternative of snd_soc_dapm_to_codec(w->dapm) typically
generates the same amount of code, so there is really no reason to keep it.
For automatic conversion the following coccinelle semantic patch can be used:
// <smpl>
@@
struct snd_soc_dapm_widget *w;
@@
-w->codec
+snd_soc_dapm_to_codec(w->dapm)
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The only user of the async I/O support in ASoC is SPI which was using it to
avoid needless context thrashing and minimise controller runtime PM bounces.
The SPI framework has now been enhanced so that even normal spi_sync() calls
won't suffer these effects so we don't need to handle this in ASoC and in
fact it can be more efficient not to since we don't need to set up and tear
down the buffers needed to manage asynchronous I/O.
The async completions that DAPM does are left in place so drivers can use
them, they are very cheap if there is no asynchronous work queued.
Signed-off-by: Mark Brown <broonie@kernel.org>
For legacy reasons the ASoC framework assumes that a CODEC INPUT or OUTPUT
widget that is not explicitly connected to a external source or sink is
potentially connected to a source or a sink and hence the framework treats
the widget itself as source (for INPUT) or sink (for OUTPUT). For this
reason a INPUT or OUTPUT widget that is really not connected needs to be
explicitly marked as so.
Setting the card's fully_routed flag will cause the ASoC core, once that all
widgets and routes have been registered, to go through the list of all
widgets and mark all INPUT and OUTPUT that are not externally connected as
non-connected. This essentially negates the default behaviour of treating
INPUT or OUTPUT widgets without external routes as sources or sinks.
This patch takes a different approach while getting the same result. Instead
of first marking INPUT and OUTPUT widgets as sinks/sources and then later
marking them as non-connected, just never mark them as a sink or a source if
the fully_routed flag is set on a card.
This requires a lot less code and also results in a slightly faster card
initialization since there is no need to iterate over all widgets and check
whether the INPUT and OUTPUT widgets are connected or not.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The connected flag of a widget only affects widgets that are either a source
or a sink. The MICBIAS widget is a simple pass-through widget though and
hence its behavior is the same regardless of whether the connected flag is
set or not.
Hence there is not much point in trying to automatically mark MICBIAS
widgets as non-connected, so just remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The card field of the snd_soc_dai field is very rarely used. We can use
dai->component->card instead and remove the card field from the snd_soc_dai
struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we cache the number of input and output paths going to/from a
widget only within a power update sequence. But not in between power update
sequences.
But we know how changes to the DAPM graph affect the number of input (form a
source) and output (to a sink) paths of a widget and only need to
recalculate them if a operation has been performed that might have changed
them.
* Adding/removing or connecting/disconnecting a path means that the for
the source of the path the number of output paths can change and for
the sink the number of input paths can change.
* Connecting/disconnecting a widget has the same effect has connecting/
disconnecting all paths of the widget. So for the widget itself the
number of inputs and outputs can change, for all sinks of the widget
the number of inputs can change and for all sources of the widget the
number of outputs can change.
* Activating/Deactivating a stream can either change the number of
outputs on the sources of the widget associated with the stream or the
number of inputs on the sinks.
Instead of always invalidating all cached numbers of input and output paths
for each power up or down sequence this patch restructures the code to only
invalidate the cached numbers when a operation that might change them has
been performed. This can greatly reduce the number of DAPM power checks for
some very common operations.
Since per DAPM operation typically only either change the number of inputs
or outputs the number of path checks is reduced by at least 50%. The number
of neighbor checks is also reduced about the same percentage, but since the
number of neighbors encountered when walking from sink to source is not the
same as when walking from source to sink the actual numbers will slightly
vary from card to card (e.g. for a mixer we see 1 neighbor when walking from
source to sink, but the number of inputs neighbors when walking from source
to sink).
Bigger improvements can be observed for widgets with multiple connected
inputs and output (e.g. mixers probably being the most widespread form of
this). Previously we had to re-calculate the number of inputs and outputs
on all input and output paths. With this change we only have to re-calculate
the number of outputs on the input path that got changed and the number of
inputs on the output paths.
E.g. imagine the following example:
A --> B ----.
v
M --> N --> Z <-- S <-- R
|
v
X
Widget Z has multiple input paths, if any change was made that cause Z to be
marked as dirty the power state of Z has to be re-computed. This requires to
know the number of inputs and outputs of Z, which requires to know the
number of inputs and outputs of all widgets on all paths from or to Z.
Previously this meant re-computing all inputs and outputs of all the path
going into or out of Z. With this patch in place only paths that actually
have changed need to be re-computed.
If the system is idle (or the part of the system affected by the changed
path) the number of path checks drops to either 0 or 1, regardless of how
large or complex the DAPM context is. 0 if there is no connected sink and no
connected source. 1 if there is either a connected source or sink, but not
both. The number of neighbor checks again will scale accordingly and will be
a constant number that is the number of inputs or outputs of the widget for
which we did the path check.
When loading a state file or switching between different profiles typically
multiple mixer and mux settings are changed, so we see the benefit of this
patch multiplied for these kinds of operations.
Testing with the ADAU1761 shows the following changes in DAPM stats for
changing a single Mixer switch for a Mixer with 5 inputs while the DAPM
context is idle.
Power Path Neighbour
Before: 2 12 30
After: 2 1 2
For the same switch, but with a active playback stream the stat changed are
as follows.
Power Path Neighbour
Before: 10 20 54
After: 10 7 21
Cumulative numbers for switching the audio profile which changes 7 controls
while the system is idle:
Power Path Neighbour
Before: 16 80 170
After: 16 7 23
Cumulative numbers for switching the audio profile which changes 7 controls
while playback is active:
Power Path Neighbour
Before: 51 123 273
After: 51 29 109
Starting (or stopping) the playback stream:
Power Path Neighbour
Before: 34 34 117
After: 34 17 69
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Supply widgets are somewhat special and not all kinds of paths to or from
supply widgets make sense. This patch adds a few sanity checks that errors
out during the path instantiation for those invalid paths. This will prevent
drivers to depend on weird behavior resulting from such paths as well as
will allow the DAPM algorithms to assume that they never see such paths.
This patch adds checks for the following three invalid types of paths:
* A path with a non-supply widget as a source connected to a supply
widget as a sink. Such a path has no effect on either of the two
connected widgets.
* Paths with a connected() callback that have a non-supply widget as the
source. The DAPM algorithm only uses the conneceted() callback for
supply widget power checks. And since it prevents caching of the DAPM
state there is no intention to make it more generic as it has
negative performance implications.
* Paths which connect a supply to a mixer or mux via a control. Controls
are only meant to affect the routing of audio data.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The state of endpoint widgets is affected by that card's power state.
Endpoint widgets that do no have the ignore_suspend flag set will be
considered inactive during suspend. So they have to be re-checked and marked
dirty after the card's power state changes. Currently the input and output
widgets are marked dirty instead, this works most of the time since
typically a path from one endpoint to another will go via a input or output
widget. But marking the endpoints dirty is technically more correct and will
also work for odd corner cases.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Supply widgets do not count towards the input and output widgets of their
neighbors and for supply widgets themselves we do not care for the number
of input or output paths. This means that a path that connects to a supply
widget effectively behaves the same as a path that as the weak property set.
This patch adds a new path flag that gets set to true when the path is
connected to at least one supply widget. If a path with the flag set is
encountered in is_connected_{input,output}_ep() is is skipped in the same
way that weak paths are skipped. This slightly brings down the number of
path checks.
Since both the weak and the supply flag are implemented as bitfields which
are stored in the same word there is no runtime overhead due to checking
both rather than just one and also the size of the path struct is not
increased by this patch. Another advantage is that we do not have to handle
supply widgets in is_connected_{input,output}_ep() anymore since it will
never be called for supply widgets. The only exception is from
dapm_widget_power_read_file() where a check is added to special case supply
widgets.
Testing with the ADAU1761, which has a handful of supply widgets, shows the
following changes in the DAPM stats for a playback stream start.
Power Path Neighbour
Before: 34 78 117
After: 34 48 117
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM widgets can be classified into four categories:
* supply: Supply widgets do not affect the power state of their
non-supply widget neighbors and unlike other widgets a
supply widget is not powered up when it is on an active
path, but when at least on of its neighbors is powered up.
* source: A source is a widget that receives data from outside the
DAPM graph or generates data. This can for example be a
microphone, the playback DMA or a signal generator. A source
widget will be considered powered up if there is an active
path to a sink widget.
* sink: A sink is a widget that transmits data to somewhere outside
of the DAPM graph. This can e.g. be a speaker or the capture
DMA. A sink widget will be considered powered up if there is
an active path from a source widget.
* normal: Normal widgets are widgets not covered by the categories
above. A normal widget will be considered powered up if it
is on an active path between a source widget and a sink
widget.
The way the number of input and output paths for a widget is calculated
depends on its category. There are a bunch of factors which decide which
category a widget is. Currently there is no formal classification of these
categories and we calculate the category of the widget based on these
factors whenever we want to know it. This is at least once for every widget
during each power update sequence. The factors which determine the category
of the widgets are mostly static though and if at all change rather seldom.
This patch introduces three new per widget flags, one for each of non-normal
widgets categories. Instead of re-computing the category each time we want
to know them the flags will be checked. For the majority of widgets the
category is solely determined by the widget id, which means it never changes
and only has to be set once when the widget is created. The only widgets
with dynamic categories are:
snd_soc_dapm_dai_out: Is considered a sink iff the capture stream is
active, otherwise normal.
snd_soc_dapm_dai_in: Is considered a source iff the playback stream
is active, otherwise normal.
snd_soc_dapm_input: Is considered a sink iff it has no outgoing
paths, otherwise normal.
snd_soc_dapm_output: Is considered a source iff it has no incoming
paths, otherwise normal.
snd_soc_dapm_line: Is considered a sink iff it has no outgoing paths
and is considered a source iff it has no incoming paths,
otherwise normal.
For snd_soc_dapm_dai_out/snd_soc_dapm_dai_in widgets the category will be
updated when a stream is started or stopped. For the other dynamic widgets
the category will be updated when a path connecting to it is added or
removed.
Introducing those new widget categories allows to make
is_connected_{output,input}_ep, which are among the hottest paths of the
DAPM algorithm, more generic and significantly shorter.
The before and after sizes for is_connected_{output,input}_ep are:
On ARM (defconfig + CONFIG_SND_SOC):
function old new delta
is_connected_output_ep 480 340 -140
is_connected_input_ep 456 352 -104
On amd64 (defconfig + CONFIG_SND_SOC):
function old new delta
is_connected_output_ep 579 427 -152
is_connected_input_ep 563 427 -136
Which is about a 25%-30% decrease, other architectures are expected to have
similar numbers. At the same time the size of the snd_soc_dapm_widget struct
does not change since the new flags are stored in the same word as the
existing flags.
Note: that since the per widget 'ext' flag was only used to decide whether a
snd_soc_dapm_input or snd_soc_dapm_output widget was a source or a sink it
is now unused and can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Controls on a path only have an effect if the sink on the path is either a
mixer or mux widget. Currently we sort of silently ignore controls on other
paths, but since they don't do anything having them on other paths does not
make much sense and it is probably safe to assume that if we see such a path
it is a mistake in the driver that registered the path. This patch modifies
snd_soc_dapm_add_path() to report an error if a path with and control is
encountered where we didn't expect a control. This also allows to simplify
the code quite a bit.
The patch also moves the connecting of the path lists out of
dapm_connect_mux() and dapm_connect_mixer() into snd_soc_dapm_add_path().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Paths that are directly connected to a MUX widget are not affected by
changes to the MUX's control. Rather than checking if a path is directly
connected each time the MUX is updated do it only once when MUX is created.
We can also remove the check for e->texts[mux] != NULL, since if that
condition was true the code would have had already crashed much earlier (And
generally speaking if a enum's 'texts' entry is NULL it's a bug in the
driver).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rework soc_dapm_{mixer,mux}_update_power() to only mark a path dirty if the
connect state if the path has actually changed. This avoids unnecessary
power state checks for the widgets involved.
Also factor out the common code that is involved in this into a helper
function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'walked' flag was used to avoid walking paths that have already been
walked. But since we started caching the number of inputs and outputs of a
path we never actually get into a situation where we try to walk a path that
has the 'walked' flag set.
There are two cases in which we can end up walking a path multiple times
within a single run of is_connected_output_ep() or is_connected_input_ep().
1) If a path splits up and rejoins later:
.--> C ---v
A -> B E --> F
'--> D ---^
When walking from A to F we'll end up at E twice, once via C and once via D.
But since we do a depth first search we'll fully discover the path and
initialize the number of outputs/inputs of the widget the first time we get
there. The second time we get there we'll use the cached value and not
bother to check any of the paths again. So we'll never see a path where
'walked' is set in this case.
2) If there is a circle:
A --> B <-- C <-.--> F
'--> D ---'
When walking from A to F we'll end up twice at B. But since there is a
circle the 'walking' flag will still be set on B once we get there the
second time. This means we won't look at any of it's outgoing paths. So in
this case we won't ever see a path where 'walked' is set either.
So it is safe to remove the flag. This on one hand means we remove some
always true checks from one of the hottest paths of the DAPM algorithm and
on the other hand means we do not have to do the tedious clearing of the
flag after checking the number inputs or outputs of a widget.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_adc_check_power() checks if the widget is active, if yes it only checks
whether there are any connected input paths. Otherwise it calls
dapm_generic_check_power() which will check for both connected input and
output paths. But the function that checks for connected output paths will
return true if the widget is a active sink. Which means the generic power
check function will work just fine and there is no need for a special power
check function.
The same applies for dapm_dac_check_power(), but with input and output paths
reversed.
This patch removes both dapm_adc_check_power() and dapm_dac_check_power()
and replace their usage with dapm_generic_check_power().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
A path has always a valid source and a valid sink otherwise we wouldn't add
it in the first place. Hence all tests that check if sink/source is non NULL
always evaluate to true and can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each widget has a list of all the paths that it is connected to. There is no
need to iterate over all paths when we are only interested in the paths of a
specific widget.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Both path->name and e->texts[i] have type const char*, so the cast is
slightly confusing and certainly unnecessary.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Coverity spotted the following possible use-after-free condition in
dapm_create_or_share_mixmux_kcontrol():
If kcontrol is NULL, and (wname_in_long_name && kcname_in_long_name)
validates to true, 'name' will be set to an allocated string, and be
freed a few lines later via the 'long_name' alias. 'name', however,
is used by dev_err() in case snd_ctl_add() fails.
Fix this by adding a jump label that frees 'long_name' at the end of
the function.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Commit 0bd2ac3dae ("ASoC: Remove CODEC pointer from snd_soc_dapm_context")
introduced regression to snd_soc_dapm_new_controls() when registering a card
with card->dapm_widgets set. Call chain is:
snd_soc_register_card()
-> snd_soc_instantiate_card()
-> snd_soc_dapm_new_controls()
-> snd_soc_dapm_new_control()
Null pointer dereference occurs since card->dapm context doesn't have
associated component. Fix this by setting widget codec pointer
conditionally.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP driver needs to know widget control value in its event handler for
widgets like mixers. This is required in the subsequent patches
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The only remaining user of the CODEC pointer in the DAPM struct is to
initialize the CODEC pointer in the widget struct. The later is scheduled
for removal, but has still a few users left. For now use
dapm->component->codec to initialize it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a substantial amount of drivers that in go to SND_SOC_BIAS_OFF on
suspend and go back to SND_SOC_BIAS_SUSPEND on resume (Often this is even
the only thing done in the suspend and resume handlers). This patch
introduces a new suspend_bias_off flag, which when set by a driver will let
the ASoC core automatically put the device's DAPM context at the
SND_SOC_BIAS_OFF level during suspend. Once the device is resumed the DAPM
context will go back to SND_SOC_BIAS_STANDBY (if the context is idle,
otherwise to SND_SOC_BIAS_ON).
This will allow us to remove a fair bit of duplicated code from the drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
If soc_dapm_read() fails, reg_val will be uninitialized, and bogus
values will be written later:
sound/soc/soc-dapm.c: In function 'snd_soc_dapm_get_enum_double':
sound/soc/soc-dapm.c:2862:15: warning: 'reg_val' may be used uninitialized in this function [-Wmaybe-uninitialized]
unsigned int reg_val, val;
^
Return early on error to fix this.
Introduced by commit ce0fc93ae5 ("ASoC:
Add DAPM support at the component level").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Both the snd_soc_codec and snd_soc_platform struct do have a pointer to the
parent card and both handle this pointer in mostly the same way. This patch
moves the card field to the component level which will allow further code
consolidation between platforms and CODECS.
Since there are only a handful of users of the snd_soc_codec struct's card field
(and none of the snd_soc_platform's) these are update in this patch as well,
which allows it to be removed from the snd_soc_codec struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
It was accidentally added in commit 44ba2641 ("ASoC: dapm: Add support for DAI
multicodec").
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add a function helper to factorize the hw_params code.
Suggested by Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The platform field in the snd_soc_dapm_widget and snd_soc_dapm_context structs
is now unused can be removed. New code that wants to get the platform for a
widget or dapm context should use snd_soc_dapm_to_platform(w->dapm) or
snd_soc_dapm_to_platform(dapm).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch adds full DAPM support at the component level. Previously there was
only full DAPM support for CODECs and partial DAPM support (e.g. no Mixers nor
MUXs) for platforms. Having DAPM support at the component level will allow all
types of components to use DAPM and also help in consolidating the DAPM support
between CODECs and platforms.
Since the DAPM context is directly embedded into the snd_soc_codec and
snd_soc_platform struct and the 'dapm' field is directly referenced in a lot of
drivers moving the field just right now is not possible without causing code
churn. The approach this patch takes is to add two new fields to the component
struct. One field which is the pointer to the actual DAPM context used by the
component and one DAPM context that will be used as the default if no other
context was specified. For CODECs and platforms the pointer is initialized to
point to the CODEC or platform DAPM context. All generic code when referencing
a component's DAPM struct will go via the pointer. This will make it possible to
eventually seamlessly move the DAPM context from snd_soc_codec and
snd_soc_platform struct over once all direct references have been eliminated.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently the DAPM code directly looks at the CODEC driver struct to get a
handle to the set_bias_level() callback. This patch adds a new set_bias_level()
callback to the DAPM context struct. The DAPM code will use this new callback
instead of the CODEC callback. For CODECs the new callback is set up to call the
CODEC specific set_bias_level callback(). Not looking directly at the CODEC
driver struct will allow non CODEC DAPM contexts to implement a set_bias_level()
callback.
This is also similar to how the seq_notifier() and stream_event() callbacks are
currently handled.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently only pins in CODEC DAPM contexts are automatically marked as
non-connected if the card has the fully_routed flag set. This makes sense since
widgets which qualify for auto-disconnection are only found in CODEC DAPM
contexts. But with componentisation this is going to change, so consider all
widgets for auto-disconnection.
Also it is probably faster to walk the widgets list only once rather than once
for each CODEC.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The component struct already has a name and id field which are initialized to
the same values as the same fields in the CODEC and platform structs. So remove
them from the CODEC and platform structs and used the ones from the component
struct instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
