Commit Graph

3119 Commits

Author SHA1 Message Date
Hirokazu Takata
1343f776c5 [PATCH] m32r: NONCACHE_OFFSET in _port2addr
Change _port2addr() not to add NONCACHE_OFFSET.  Adding NONCACHE_OFFSET
requires needless address adjusting by a driver using ioremap() like a
SMC91x driver.

Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:16 -08:00
Hirokazu Takata
c978b0179b [PATCH] m32r: fix #if warnings
Fix warnings for #if directives.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:15 -08:00
Hirokazu Takata
baa0b84f10 [PATCH] m32r: remove unused instructions
Remove unused instructions for debugging.

Signed-off-by: Naoto Sugai <sugai@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:15 -08:00
Rafael J. Wysocki
2c1b4a5ca4 [PATCH] swsusp: rework memory freeing on resume
The following patch makes swsusp use the PG_nosave and PG_nosave_free flags to
mark pages that should be freed in case of an error during resume.

This allows us to simplify the code and to use swsusp_free() in all of the
swsusp's resume error paths, which makes them actually work.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:14 -08:00
Ashok Raj
1aa1a9f98f [PATCH] create and destroy cache sysfs entries based on cpu notifiers
cpu cache entries should be populated only when cpu is online and removed
when they are logically offlined.

Without which entries are not removed when cpu is offlined, or dont appear
when we boot with maxcpus=1 and then kick the rest of the cpus via echo 1
to the sysfs online file.

- Changed __devinit to __cpuinit for consistency.
- Changed sysfs_driver_register to register_cpu_notifier.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Zwane Mwaikambo <zwane@holomorphy.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:14 -08:00
Magnus Damm
5d35704028 [PATCH] i386: srat on non-acpi hw fix
This patch adds a check for the return value of acpi_find_root_pointer().
Without this patch systems without ACPI support such as QEMU crashes when
booting a NUMA kernel with CONFIG_ACPI_SRAT=y.

Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Eric W. Biederman
6c180d94ab [PATCH] i386 mpparse: Only ignore lapic information we can't store
After staring at mpparse.c for a little longer I noticed that when we hit
our limit of num_processors we are filtering out information about other
processors that we can still store.

This patch just reorders the code so we store everything we can.

This should avoid the incorrect warning about our boot CPU not being listed
by the BIOS that we are now getting in the kexec on panic case, and it
should allow us to detect all apicid conflicts even when our physical
number of cpus exceeds maxcpus.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Vivek Goyal
009b29d90f [PATCH] kdump/i386: apic verification failure fix
o Removes the unnecessary call to local_irq_disable().

o Kdump was failing while second kernel was coming up. Check for presence
  of boot cpu apic id was failing in (apic_id_registered), hence hitting
  BUG().

o This should not have failed because before calling setup_local_APIC(), it is
  ensured that even if BIOS has not reported boot cpu, then hard set the
  prence of it. Problem happens because of usage of hard_smp_processor_id()
  which is hardcoded to zero in case of non SMP kernel. In kdump case second
  kernel can boot on a cpu whose boot cpu id is not zero.

o Using boot_cpu_physical_apicid instead to hard set the presence of boot cpu.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Brian Gerst
c531178157 [PATCH] Clean up mtrr compat ioctl code
Handle 32-bit mtrr ioctls in the mtrr driver instead of the ia32
compatability layer.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Kamble, Nitin A
daedb82d6b [PATCH] x86: vmx cpu feature detection
If VMX feature is available in the CPU, this patch will make it visible in
the /proc/cpuinfo with the cpuid detection.

Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Eric W. Biederman
3d1675b41b [PATCH] i386 kexec-on-panic: Don't shutdown the apics.
It is dangerous to shutdown the apics in machine_crash_shutdown.

With my previous patch to initialize apics in init_IRQ we should be able to
boot a kernel without this.  As long as we reinitialize the APICs we don't
care what state they were in during bootup.

This should make machine_crash_shutdown noticeably more reliable.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Eric W. Biederman
f2b36db692 [PATCH] i386: move apic init in init_IRQs
All kinds of ugliness exists because we don't initialize
the apics during init_IRQs.
- We calibrate jiffies in non apic mode even when we are using apics.
- We have to have special code to initialize the apics when non-smp.
- The legacy i8259 must exist and be setup correctly, even
  when we won't use it past initialization.
- The kexec on panic code must restore the state of the io_apics.
- init/main.c needs a special case for !smp smp_init on x86

In addition to pure code movement I needed a couple
of non-obvious changes:
- Move setup_boot_APIC_clock into APIC_late_time_init for
  simplicity.
- Use cpu_khz to generate a better approximation of loops_per_jiffies
  so I can verify the timer interrupt is working.
- Call setup_apic_nmi_watchdog again after cpu_khz is initialized on
  the boot cpu.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Eric W. Biederman
29b70081f7 [PATCH] i386 nmi_watchdog: Merge check_nmi_watchdog fixes from x86_64
The per cpu nmi watchdog timer is based on an event counter.  idle cpus
don't generate events so the NMI watchdog doesn't fire and the test to see
if the watchdog is working fails.

- Add nmi_cpu_busy so idle cpus don't mess up the test.
- kmalloc prev_nmi_count to keep kernel stack usage bounded.
- Improve the error message on failure so there is enough
  information to debug problems.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00
Eric W. Biederman
fcfd636a72 [PATCH] i386 io_apic.c: Memorize at bootup where the i8259 is connected
Currently we attempt to restore virtual wire mode on reboot, which only
works if we can figure out where the i8259 is connected.  This is very
useful when we kexec another kernel and likely helpful when dealing with a
BIOS that make assumptions about how the system is setup.

Since the acpi MADT table does not provide the location where the i8259 is
connected we have to look at the hardware to figure it out.

Most systems have the i8259 connected the local apic of the cpu so won't be
affected but people running Opteron and some serverworks chipsets should be
able to use kexec now.

In addition this patch removes the hard coded assumption that the io_apic
that delivers isa interrups is always known to the kernel as io_apic 0.  As
there does not appear to be anything to guarantee that assumption is true.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Natalie.Protasevich@unisys.com
9338316c93 [PATCH] ES7000 platform update
This is platform code update for ES7000: disables IRQ overrides for the
recent ES7000 (Rascal/Zorro), cleans up the compile warning.  The patch
only affects the ES7000 subarch.

Signed-off-by: <Natalie.Protasevich@unisys.com>
Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Venkatesh Pallipadi
30037f66ce [PATCH] x86: when L3 is present show its size in /proc/cpuinfo
The code that prints the cache size assumes that L3 always lives in chipset
and is shared across CPUs.  Which is not really true.

I think all the cachesizes reported by cpuid are in the processor itself.
The attached patch changes the code to reflect that.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Dave Hansen
f014a556e7 [PATCH] fixup bogus e820 entry with mem=
This was reported because someone was getting oopses reading /proc/iomem.
It was tracked down to a zero-sized 'struct resource' entry which was
located right at 4GB.

You need two conditions to hit this bug: a BIOS E820_RAM area starting at
exactly the boundary where you specify mem= (to get a zero-sized entry),
and for the legacy_init_iomem_resources() loop to skip that resource (which
only happens at exactly 4G).

I think the killing zero-sized e820 entry is the easiest way to fix this.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
aleksey_gorelov@phoenix.com
750deaa402 [PATCH] asus vt8235 router buggy bios workaround
Hopefully fix http://bugzilla.kernel.org/show_bug.cgi?id=5235

Similar problem has been reported before here:
http://groups.google.com/group/linux.kernel/browse_thread/thread/def4ca19dbc3cd4/5cffbf349f2c87a4?tvc=2&q=Aleksey+Gorelov&hl=en#5cffbf349f2c87a4
and was related to bug in BIOS reporting 82C686 router compatible to 586.

I suspect BIOS on this board has similar issue: reports VT8235 router to be
compatible with 586 one - which is obviously not true.  Patch from the link
above has already incorporated in both 2.6 & 2.4 series, but might not work
in this particular case.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Venkatesh Pallipadi
434440a280 [PATCH] x86: bug fix in P6 Machine check initialization
Make P6 MCA initialization code complaint with guidelines in IA-32 SDM
Vol3.  Bank 0 control register should not be set by OS and clear status
registers on all banks on reset.

This will prevent false MCE alarms on the systems that has some non-MCE
information left-over in MC0_STATUS on reboot.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Zachary Amsden
251e6912df [PATCH] x86: add an accessor function for getting the per-CPU gdt
Add an accessor function for getting the per-CPU gdt.  Callee must already
have the CPU.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Zachary Amsden
72e12b76fe [PATCH] x86: bogus tls from gdt
The per-CPU initialization code is copying in bogus data into
thread->tls_array.  Note that it copies &per_cpu(cpu_gdt_table, cpu), not
&per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN).  That is totally broken
and unnecessary.  Make the initialization explicitly NULL.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Natalie Protasevich
9f40a72a7e [PATCH] x86: hot plug CPU to support physical add of new processors
The patch allows physical bring-up of new processors (not initially present
in the configuration) from facilities such as driver/utility implemented on
a platform.  The actual method of making processors available is up to the
platform implementation.

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Zwane Mwaikambo <zwane@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Siddha, Suresh B
d16aafff25 [PATCH] intel_cacheinfo: remove MAX_CACHE_LEAVES limit
Initial internal version of Venki's cpuid(4) deterministic cache parameter
identification patch used static arrays of size MAX_CACHE_LEAVES.  Final patch
which made to the base used dynamic array allocation, with this
MAX_CACHE_LEAVES limit hunk still in place.

cpuid(4) already has a mechanism to find out the number of cache levels
implemented and there is no need for this hardcoded MAX_CACHE_LEAVES limit.

So remove the MAX_CACHE_LEAVES limit from the routine which calculates the
number of cache levels using cpuid(4)

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:11 -08:00
Bart Oldeman
d5cd4aadd3 [PATCH] x86: initialise tss->io_bitmap_owner to something
There exists a field io_bitmap_owner in the TSS that is only checked, but
never set to anything else but NULL.

Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:11 -08:00
Shaohua Li
08967f941a [PATCH] FPU context corrupted after resume
mxcsr_feature_mask_init isn't needed in suspend/resume time (we can use
boot time mask).  And actually it's harmful, as it clear task's saved
fxsave in resume.  This bug is widely seen by users using zsh.

(akpm: my eyes.  Fixed some surrounding whitespace mess)

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:11 -08:00
Jan Beulich
8896fab35e [PATCH] x86: cmpxchg improvements
This adjusts i386's cmpxchg patterns so that

- for word and long cmpxchg-es the compiler can utilize all possible
  registers

- cmpxchg8b gets disabled when the minimum specified hardware architectur
  doesn't support it (like was already happening for the byte, word, and
  long ones).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:11 -08:00
Mathieu Desnoyers
dacb16b1a0 [PATCH] i386 and x86_64 TSC set_cyc2ns_scale imprecision
I just found out that some precision is unnecessarily lost in the
arch/i386/kernel/timers/timer_tsc.c:set_cyc2ns_scale function.  It uses a
cpu_mhz parameter when it could use a cpu_khz.  In the specific case of an
Intel P4 running at 3001.171 Mhz, the truncation to 3001 Mhz leads to an
imprecision of 19 microseconds per second : this is very sad for a timer with
nearly nanosecond accuracy.

Fix the x86_64 architecture too.

Cc: george anzinger <george@mvista.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:11 -08:00
Brian Gerst
0d078f6f96 [PATCH] CONFIG_IA32
Add CONFIG_X86_32 for i386.  This allows selecting options that only apply
to 32-bit systems.

(X86 && !X86_64) becomes X86_32
(X86 ||  X86_64) becomes X86

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:10 -08:00
Deepak Saxena
5ecdb02c9d [ARM] fix ixp2x00 defconfig NR_UARTS options
IXDP2[48]00 have only 1 UART on the board.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 23:36:37 +00:00
Nicolas Pitre
f741a1aab5 [ARM] 3049/1: More optimized libgcc functions
Patch from Nicolas Pitre

This patch gets rid of the last C implementations of needed libgcc
functions for the kernel, replacing them with optimized assembly
versions.

Those functions are:

__ashldi3
__ashrdi3
__lshrdi3
__muldi3
__ucmpdi2

The first 3 were lifted from gcc, the other two were written from scratch.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 23:08:03 +00:00
Russell King
cb7610d018 [ARM] Clean up dmabounce
Encapsulate pool data into dmabounce_pool.  Only account successful
allocations.  Use dma_mapping_error().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 21:12:08 +00:00
Russell King
b4c2803ca8 [ARM] Make v6 copypage function static and cleanup pgprots
We know what pgprot we're going to use, so don't #define it.  Also,
since we select the nonaliasing/aliasing copypage implementation at
run time, there's no point having it globally visible.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 19:03:21 +00:00
Russell King
d362979aa2 [ARM] Re-organise die()
Provide __die() which can be called from various contexts to provide
an oops report.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 19:01:43 +00:00
Richard Purdie
dc07845d0c [ARM] 3069/1: Add spitz irda platform support
Patch from Richard Purdie

Add spitz irda platform support

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 14:50:25 +00:00
Richard Purdie
ca1140b57d [ARM] 3068/1: Add corgi irda platform support
Patch from Richard Purdie

Add corgi irda platform support

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 14:38:53 +00:00
Richard Purdie
8e4b8715d8 [ARM] 3067/1: Add poodle irda platform support
Patch from Richard Purdie

Add poodle irda platform support

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 14:38:52 +00:00
Paul Mackerras
5f6b5b973a powerpc: Fix time setting bug on 32-bit
This fixes a bug where settimeofday would set the wrong parameters
in do_gtod, resulting in gettimeofday returning a value about 4
hours after the correct time.  The bug was that we divided a
negative 64-bit value with do_div, which treated it as unsigned
and gave us a result that was approximately 1.8e10 too large
(since the divisor was 1e9).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-30 22:55:52 +11:00
Dave Hansen
bb7e7e032d [PATCH] memory hotplug: ppc64 specific hot-add functions
Here is a set of ppc64 specific patches that at least allow
compilation/booting with the following configurations:

FLATMEM
SPARSEMEN
SPARSEMEM + MEMORY_HOTPLUG

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:45 -07:00
Dave Hansen
05039b9263 [PATCH] memory hotplug: i386 addition functions
Adds the necessary for non-NUMA hot-add of highmem to an existing zone on
i386.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:45 -07:00
Dave Hansen
208d54e551 [PATCH] memory hotplug locking: node_size_lock
pgdat->node_size_lock is basically only neeeded in one place in the normal
code: show_mem(), which is the arch-specific sysrq-m printing function.

Strictly speaking, the architectures not doing memory hotplug do no need this
locking in show_mem().  However, they are all included for completeness.  This
should also make any future consolidation of all of the implementations a
little more straightforward.

This lock is also held in the sparsemem code during a memory removal, as
sections are invalidated.  This is the place there pfn_valid() is made false
for a memory area that's being removed.  The lock is only required when doing
pfn_valid() operations on memory which the user does not already have a
reference on the page, such as in show_mem().

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Hugh Dickins
4c21e2f244 [PATCH] mm: split page table lock
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.

This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock.  (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)

In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.

Splitting the lock is not quite for free: another cacheline access.  Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS.  But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.

There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Hugh Dickins
b38c6845b6 [PATCH] mm: uml kill unused
In worrying over the various pte operations in different architectures, I came
across some unused functions in UML: remove mprotect_kernel_vm,
protect_vm_page and addr_pte.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Hugh Dickins
8f5cd76c18 [PATCH] mm: uml pte atomicity
There's usually a good reason when a pte is examined without the lock; but it
makes me nervous when the pointer is dereferenced more than once.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Hugh Dickins
a7e4705b24 [PATCH] mm: cris v32 mmu_context_lock
The cris v32 switch_mm guards get_mmu_context with next->page_table_lock: good
it's not really SMP yet, since get_mmu_context messes with global variables
affecting other mms.  Replace by global mmu_context_lock.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Hugh Dickins
92dc6fcc84 [PATCH] mm: parisc pte atomicity
There's a worrying function translation_exists in parisc cacheflush.h,
unaffected by split ptlock since flush_dcache_page is using it on some other
mm, without any relevant lock.  Oh well, make it a slightly more robust by
factoring the pfn check within it.  And it looked liable to confuse a
camouflaged swap or file entry with a good pte: fix that too.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Hugh Dickins
69b0475456 [PATCH] mm: arm ready for split ptlock
Prepare arm for the split page_table_lock: three issues.

Signal handling's preserve and restore of iwmmxt context currently involves
reading and writing that context to and from user space, while holding
page_table_lock to secure the user page(s) against kswapd.  If we split the
lock, then the structure might span two pages, secured by to read into and
write from a kernel stack buffer, copying that out and in without locking (the
structure is 160 bytes in size, and here we're near the top of the kernel
stack).  Or would the overhead be noticeable?

arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of
pte_offset_map and mm-wide page_table_lock; and strictly, it should now also
take mmap_sem before descending to pmd, to guard against another thread
munmapping, and the page table pulled out beneath this thread.

Updated two comments in fault-armv.c.  adjust_pte is interesting, since its
modification of a pte in one part of the mm depends on the lock held when
calling update_mmu_cache for a pte in some other part of that mm.  This can't
be done with a split page_table_lock (and we've already taken the lowest lock
in the hierarchy here): so we'll have to disable split on arm, unless
CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Hugh Dickins
60ec558549 [PATCH] mm: i386 sh sh64 ready for split ptlock
Use pte_offset_map_lock, instead of pte_offset_map (or inappropriate
pte_offset_kernel) and mm-wide page_table_lock, in sundry arch places.

The i386 vm86 mark_screen_rdonly: yes, there was and is an assumption that the
screen fits inside the one page table, as indeed it does.

The sh __do_page_fault: which handles both kernel faults (without lock) and
user mm faults (locked - though it set_pte without locking before).

The sh64 flush_cache_range and helpers: which wrongly thought callers held
page_table_lock before (only its tlb_start_vma did, and no longer does so);
moved the flush loop down, and adjusted the large versus small range decision
to consider a range which spans page tables as large.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:41 -07:00
Hugh Dickins
c34d1b4d16 [PATCH] mm: kill check_user_page_readable
check_user_page_readable is a problematic variant of follow_page.  It's used
only by oprofile's i386 and arm backtrace code, at interrupt time, to
establish whether a userspace stackframe is currently readable.

This is problematic, because we want to push the page_table_lock down inside
follow_page, and later split it; whereas oprofile is doing a spin_trylock on
it (in the i386 case, forgotten in the arm case), and needs that to pin
perhaps two pages spanned by the stackframe (which might be covered by
different locks when we split).

I think oprofile is going about this in the wrong way: it doesn't need to know
the area is readable (neither i386 nor arm uses read protection of user
pages), it doesn't need to pin the memory, it should simply
__copy_from_user_inatomic, and see if that succeeds or not.  Sorry, but I've
not got around to devising the sparse __user annotations for this.

Then we can eliminate check_user_page_readable, and return to a single
follow_page without the __follow_page variants.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:41 -07:00
Hugh Dickins
663b97f7ef [PATCH] mm: flush_tlb_range outside ptlock
There was one small but very significant change in the previous patch:
mprotect's flush_tlb_range fell outside the page_table_lock: as it is in 2.4,
but that doesn't prove it safe in 2.6.

On some architectures flush_tlb_range comes to the same as flush_tlb_mm, which
has always been called from outside page_table_lock in dup_mmap, and is so
proved safe.  Others required a deeper audit: I could find no reliance on
page_table_lock in any; but in ia64 and parisc found some code which looks a
bit as if it might want preemption disabled.  That won't do any actual harm,
so pending a decision from the maintainers, disable preemption there.

Remove comments on page_table_lock from flush_tlb_mm, flush_tlb_range and
flush_tlb_page entries in cachetlb.txt: they were rather misleading (what
generic code does is different from what usually happens), the rules are now
changing, and it's not yet clear where we'll end up (will the generic
tlb_flush_mmu happen always under lock?  never under lock?  or sometimes under
and sometimes not?).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:40 -07:00
Hugh Dickins
b462705ac6 [PATCH] mm: arches skip ptlock
Convert those few architectures which are calling pud_alloc, pmd_alloc,
pte_alloc_map on a user mm, not to take the page_table_lock first, nor drop it
after.  Each of these can continue to use pte_alloc_map, no need to change
over to pte_alloc_map_lock, they're neither racy nor swappable.

In the sparc64 io_remap_pfn_range, flush_tlb_range then falls outside of the
page_table_lock: that's okay, on sparc64 it's like flush_tlb_mm, and that has
always been called from outside of page_table_lock in dup_mmap.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:40 -07:00
Hugh Dickins
872fec16d9 [PATCH] mm: init_mm without ptlock
First step in pushing down the page_table_lock.  init_mm.page_table_lock has
been used throughout the architectures (usually for ioremap): not to serialize
kernel address space allocation (that's usually vmlist_lock), but because
pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it.

Reverse that: don't lock or unlock init_mm.page_table_lock in any of the
architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take
and drop it when allocating a new one, to check lest a racing task already
did.  Similarly no page_table_lock in vmalloc's map_vm_area.

Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle
user mms, which are converted only by a later patch, for now they have to lock
differently according to whether or not it's init_mm.

If sources get muddled, there's a danger that an arch source taking
init_mm.page_table_lock will be mixed with common source also taking it (or
neither take it).  So break the rules and make another change, which should
break the build for such a mismatch: remove the redundant mm arg from
pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13).

Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64
used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to
pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64
map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free
took page_table_lock for no good reason.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:40 -07:00
Hugh Dickins
46dea3d092 [PATCH] mm: ia64 use expand_upwards
ia64 has expand_backing_store function for growing its Register Backing Store
vma upwards.  But more complete code for this purpose is found in the
CONFIG_STACK_GROWSUP part of mm/mmap.c.  Uglify its #ifdefs further to provide
expand_upwards for ia64 as well as expand_stack for parisc.

The Register Backing Store vma should be marked VM_ACCOUNT.  Implement the
intention of growing it only a page at a time, instead of passing an address
outside of the vma to handle_mm_fault, with unknown consequences.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:39 -07:00
Nick Piggin
b5810039a5 [PATCH] core remove PageReserved
Remove PageReserved() calls from core code by tightening VM_RESERVED
handling in mm/ to cover PageReserved functionality.

PageReserved special casing is removed from get_page and put_page.

All setting and clearing of PageReserved is retained, and it is now flagged
in the page_alloc checks to help ensure we don't introduce any refcount
based freeing of Reserved pages.

MAP_PRIVATE, PROT_WRITE of VM_RESERVED regions is tentatively being
deprecated.  We never completely handled it correctly anyway, and is be
reintroduced in future if required (Hugh has a proof of concept).

Once PageReserved() calls are removed from kernel/power/swsusp.c, and all
arch/ and driver code, the Set and Clear calls, and the PG_reserved bit can
be trivially removed.

Last real user of PageReserved is swsusp, which uses PageReserved to
determine whether a struct page points to valid memory or not.  This still
needs to be addressed (a generic page_is_ram() should work).

A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and
thus mapcounted and count towards shared rss).  These writes to the struct
page could cause excessive cacheline bouncing on big systems.  There are a
number of ways this could be addressed if it is an issue.

Signed-off-by: Nick Piggin <npiggin@suse.de>

Refcount bug fix for filemap_xip.c

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:39 -07:00
Hugh Dickins
f9c98d0287 [PATCH] mm: m68k kill stram swap
Please, please now delete the Atari CONFIG_STRAM_SWAP code.  It may be
excellent and ingenious code, but its reference to swap_vfsmnt betrays that it
hasn't been built since 2.5.1 (four years old come December), it's delving
deep into matters which are the preserve of core mm code, its only purpose is
to give the more conscientious mm guys an anxiety attack from time to time;
yet we keep on breaking it more and more.

If you want to use RAM for swap, then if the MTD driver does not already
provide just what you need, I'm sure David could be persuaded to add the
extra.  But you'd also like to be able to allocate extents of that swap for
other use: we can give you a core interface for that if you need.  But unbuilt
for four years suggests to me that there's no need at all.

I cannot swear the patch below won't break your build, but believe so.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:38 -07:00
Hugh Dickins
147efea8eb [PATCH] mm: sh64 hugetlbpage.c
The sh64 hugetlbpage.c seems to be erroneous, left over from a bygone age,
clashing with the common hugetlb.c.  Replace it by a copy of the sh
hugetlbpage.c.  Except, delete that mk_pte_huge macro neither uses.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:38 -07:00
Hugh Dickins
404351e67a [PATCH] mm: mm_init set_mm_counters
How is anon_rss initialized?  In dup_mmap, and by mm_alloc's memset; but
that's not so good if an mm_counter_t is a special type.  And how is rss
initialized?  By set_mm_counter, all over the place.  Come on, we just need to
initialize them both at once by set_mm_counter in mm_init (which follows the
memcpy when forking).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:38 -07:00
Hugh Dickins
fc2acab31b [PATCH] mm: tlb_finish_mmu forget rss
zap_pte_range has been counting the pages it frees in tlb->freed, then
tlb_finish_mmu has used that to update the mm's rss.  That got stranger when I
added anon_rss, yet updated it by a different route; and stranger when rss and
anon_rss became mm_counters with special access macros.  And it would no
longer be viable if we're relying on page_table_lock to stabilize the
mm_counter, but calling tlb_finish_mmu outside that lock.

Remove the mmu_gather's freed field, let tlb_finish_mmu stick to its own
business, just decrement the rss mm_counter in zap_pte_range (yes, there was
some point to batching the update, and a subsequent patch restores that).  And
forget the anal paranoia of first reading the counter to avoid going negative
- if rss does go negative, just fix that bug.

Remove the mmu_gather's flushes and avoided_flushes from arm and arm26: no use
was being made of them.  But arm26 alone was actually using the freed, in the
way some others use need_flush: give it a need_flush.  arm26 seems to prefer
spaces to tabs here: respect that.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:37 -07:00
Hugh Dickins
4d6ddfa924 [PATCH] mm: tlb_is_full_mm was obscure
tlb_is_full_mm?  What does that mean?  The TLB is full?  No, it means that the
mm's last user has gone and the whole mm is being torn down.  And it's an
inline function because sparc64 uses a different (slightly better)
"tlb_frozen" name for the flag others call "fullmm".

And now the ptep_get_and_clear_full macro used in zap_pte_range refers
directly to tlb->fullmm, which would be wrong for sparc64.  Rather than
correct that, I'd prefer to scrap tlb_is_full_mm altogether, and change
sparc64 to just use the same poor name as everyone else - is that okay?

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:37 -07:00
Hugh Dickins
ab50b8ed81 [PATCH] mm: vm_stat_account unshackled
The original vm_stat_account has fallen into disuse, with only one user, and
only one user of vm_stat_unaccount.  It's easier to keep track if we convert
them all to __vm_stat_account, then free it from its __shackles.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:37 -07:00
Linus Torvalds
be15cd72d2 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-29 14:02:16 -07:00
Nicolas Pitre
37d07b72ef [ARM] 3061/1: cleanup the XIP link address mess
Patch from Nicolas Pitre

Since vmlinux.lds.S is preprocessed, we can use the defines already
present in asm/memory.h (allowed by patch #3060) for the XIP kernel link
address instead of relying on a duplicated Makefile hardcoded value, and
also get rid of its dependency on awk to handle it at the same time.

While at it let's clean XIP stuff even further and make things clearer
in head.S with a nice code reduction.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29 21:44:56 +01:00
Nicolas Pitre
f09b997999 [ARM] 3060/1: allow constants found in asm/memory.h to be used in asm code
Patch from Nicolas Pitre

This patch allows for assorted type of cleanups by letting assembly code
use the same set of defines for constant values and avoid duplicated
definitions that might not always be in sync, or that might simply be
confusing due to the different names for the same thing.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29 21:44:55 +01:00
Ralf Baechle
09af7b443c Update MIPS defconfig files.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:54 +01:00
Arthur Othieno
5ef66935c1 prom_free_prom_memory() returns unsigned long
Some boards declare prom_free_prom_memory as a void function but the
    caller free_initmem() expects a return value.
    
    Fix those up and return 0 instead, just like everyone else does.
    
    Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
    Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:53 +01:00
Ralf Baechle
4b724efdde Get rid of SINGLE_ONLY_FPU. Linux does not support half FPU other than
by emulation of a full FPU.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:52 +01:00
Ralf Baechle
3fccc0150e Fix all the get_user / put_user related sparse warnings.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:52 +01:00
Ralf Baechle
3c5c8f6748 Delete unused ieee754_cname[] and declaration.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:52 +01:00
Ralf Baechle
efec3c4e96 Include for prototypes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:51 +01:00
Ralf Baechle
a663bf906d Protect against multiple inclusion.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:51 +01:00
Ralf Baechle
030274ae03 Remove useless casts of kmalloc return values.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:50 +01:00
Ralf Baechle
e5adb8770e Hack to resolve longstanding prefetch issue
Prefetching may be fatal on some systems if we're prefetching beyond the
end of memory on some systems.  It's also a seriously bad idea on non
dma-coherent systems.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:50 +01:00
Ralf Baechle
7cf8053b8e More foolproofing of the CPU configuration.
Limit the number of cpu type options in the cpu menu to just those
types that are actually available for the select platform.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:49 +01:00
Andrew Isaacson
cb4262481f pci-expmem-hack
CFE 1.2.5 and earlier fails to turn on the ExpMemEn bit in the
PCIFeatureControl register, which means that DMA does not work
beyond physical address 01_0000_0000, ergo to DRAM beyond 1GB.
    
With ExpMemEn turned on, 01_0000_0000-0f_ffff_ffff is mapped,
so DMA works for up to 61 GB of DRAM.
    
Will be fixed in CFE 1.2.6 (yet to be released).
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:49 +01:00
Andrew Isaacson
8a1417de9e BCM1480 HT support
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:49 +01:00
Andrew Isaacson
dc41f94f77 Support for the BCM1480 on-chip PCI-X bridge.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:48 +01:00
Andrew Isaacson
a4b5bd9abc SB1 cache exception handling.
Expand SB1 cache error handling by adding SB1_CEX_ALWAYS_FATAL and
SB1_CEX_STALL, allowing configurable behavior on cache errors.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:48 +01:00
Andrew Isaacson
9a6dcea103 Support for BigSur board.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:47 +01:00
Andrew Isaacson
f137e463b5 Add support for BCM1480 family of chips.
- Kconfig and Makefile changes
 - arch/mips/sibyte/bcm1480/
 - changes to sibyte common code to support 1480
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:47 +01:00
Andrew Isaacson
93ce2f524e Add support for SB1A CPU.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:46 +01:00
Andrew Isaacson
d121ced21d Sibyte fixes
Fix typo in cpu_probe_sibyte.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:45 +01:00
Atsushi Nemoto
750ccf687f Fix zero length sys_cacheflush
Cacheflush(0, 0, 0) was crashing the system.  This is because
flush_icache_range(start, end) tries to flushing whole address space
(0 - ~0UL) if both start and end are zero.
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:44 +01:00
Ralf Baechle
f4c72cc737 Get 64-bit right in the kgdb stub.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:43 +01:00
Ralf Baechle
0d507d61cd Sys_lookup_dcookie arguments occupy 4 argument slots.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:43 +01:00
Ralf Baechle
12616ed202 FPU emulator garbage collection.
First argument of fpu_emulator_cop1Handler() was unused.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:43 +01:00
Ralf Baechle
178086c86a Don't print file name and line in die and die_if_kernel.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:42 +01:00
Ralf Baechle
6ec25809c1 Rename page argument of flush_cache_page to something more descriptive.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:42 +01:00
Ralf Baechle
5e83d43054 Sliceup Kconfig; it's grown too large.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:41 +01:00
Ralf Baechle
9383292f17 Date: Fri Jan 14 03:03:23 2005 +0000
Locking cleanups.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:39 +01:00
Ralf Baechle
dbc571690e Fix wrong comment.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:38 +01:00
Ralf Baechle
ec917c2c1a Fixup a few lose ends in explicit support for MIPS R1/R2.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:37 +01:00
Ralf Baechle
f92c1759a4 Document the meaning of the CPU_MIPS32, CPU_MIPS64, CPU_MIPSR1 and
CPU_MIPSR2.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:37 +01:00
Ralf Baechle
101b3531a6 Protect manipulation of c0_status against preemption and multithreading.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:36 +01:00
Ralf Baechle
8afcb5d829 Detect 4KSD and treat it like 4KSc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:36 +01:00
Ralf Baechle
2f69ddccb0 Convert the remaining SPIN_LOCK_UNLOCKED instances to DEFINE_SPINLOCK.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:35 +01:00
Ralf Baechle
57468af326 Define and initialize kdb_lock using DEFINE_SPINLOCK.
Convert kgdb_cpulock into a raw_spinlock_t.
    
SPIN_LOCK_UNLOCKED is deprecated and it's replacement DEFINE_SPINLOCK is
not suitable for arrays of spinlocks.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:35 +01:00
Ralf Baechle
f8bb3af924 Make kgdb_wait static.
Nothing outside gdb-stub.c uses kgdb_wait, so change it's definition to
static.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:34 +01:00
Ralf Baechle
65f1f5a2c3 Don't copy SB1 cache error handler to uncached memory.
This may have made sense on a paranoid day with pass 1 BCM1250 processors
that were throwing cache error exception left and right for no good
reason.  On modern silicion that hardly makes sense and the code had
gotten just an obscurity ...
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:34 +01:00
Ralf Baechle
6aaf7786ed No need to explicitly call __read_64bit_c0_split; __read_64bit_c0_register
will do that itself iff needed.  Fix format string.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:33 +01:00
Andrew Isaacson
46dc3a4a09 Fix stale comment in c-sb1.c.
Signed-Off-By: Andrew Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:33 +01:00
Ralf Baechle
02cf211968 Cleanup the mess in cpu_cache_init.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:32 +01:00