When EXT_DEBUG is enabled I received the following compile warning on
PPC64:
CC [M] fs/ext4/inode.o
CC [M] fs/ext4/extents.o
fs/ext4/extents.c: In function ‘ext4_ext_rm_leaf’:
fs/ext4/extents.c:2097: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘ext4_lblk_t’
fs/ext4/extents.c: In function ‘ext4_ext_get_blocks’:
fs/ext4/extents.c:2789: warning: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘long unsigned int’
fs/ext4/extents.c:2852: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘ext4_lblk_t’
fs/ext4/extents.c:2953: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘unsigned int’
CC [M] fs/ext4/migrate.o
The patch fixes compile warning.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Index: linux-2.6.31-rc4/fs/ext4/extents.c
===================================================================
Currently the group preallocation code tries to find a large (512)
free block from which to do per-cpu group allocation for small files.
The problem with this scheme is that it leaves the filesystem horribly
fragmented. In the worst case, if the filesystem is unmounted and
remounted (after a system shutdown, for example) we forget the fact
that wee were using a particular (now-partially filled) 512 block
extent. So the next time we try to allocate space for a small file,
we will find *another* completely free 512 block chunk to allocate
small files. Given that there are 32,768 blocks in a block group,
after 64 iterations of "mount, write one 4k file in a directory,
unmount", the block group will have 64 files, each separated by 511
blocks, and the block group will no longer have any free 512
completely free chunks of blocks for group preallocation space.
So if we try to allocate blocks for a file that has been closed, such
that we know the final size of the file, and the filesystem is not
busy, avoid using group preallocation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logic around sbi->s_mb_last_group and sbi->s_mb_last_start was all
screwed up. These fields were getting unconditionally all the time,
set even when stream allocation had not taken place, and if they were
being used when the file was smaller than s_mb_stream_request, which
is when the allocation should _not_ be doing stream allocation.
Fix this by determining whether or not we stream allocation should
take place once, in ext4_mb_group_or_file(), and setting a flag which
gets used in ext4_mb_regular_allocator() and ext4_mb_use_best_found().
This simplifies the code and assures that we are consistently using
(or not using) the stream allocation logic.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
move_extent_par_page calls a_ops->write_begin() to increase journal
handler's reference count. However, if either mext_replace_branches()
or ext4_get_block fails, the increased reference count isn't
decreased. This will cause a later attempt to umount of the fs to hang
forever. The patch addresses the issue by calling ext4_journal_stop()
if page is not NULL (which means a_ops->write_end() isn't invoked).
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When compiling with EXT4FS_DEBUG on, gcc will complain with following warnings:
linux-2.6/fs/ext4/ialloc.c: In function ‘ext4_count_free_inodes’:
linux-2.6/fs/ext4/ialloc.c:1192: warning: format ‘%lu’ expects type
‘long unsigned int’, but argument 2 has type ‘ext4_group_t’
So add a type cast to suppress it.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When MB_DEBUG is enabled, we get some compile warnings because
ext4_group_t is unsigned int. This patch fixes them.
Signed-off-by Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After the patch I posted last week regarding buffer head ref leaks in
no-journal mode, I looked at all the code that uses buffer heads and
searched for more potential leaks.
The patch below fixes the issues I found; these can occur even when a
journal is present.
The change to inode.c fixes a double release if
ext4_journal_get_create_access() fails.
The changes to namei.c are more complicated. add_dirent_to_buf() will
release the input buffer head EXCEPT when it returns -ENOSPC. There are
some callers of this routine that don't always do the brelse() in the event
that -ENOSPC is returned. Unfortunately, to put this fix into ext4_add_entry()
required capturing the return value of make_indexed_dir() and
add_dirent_to_buf().
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to check to make sure a journal is present before checking the
journal flags in ext4_decode_error().
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The allocation of the ext4_group_info array was moved to a new
function ext4_mb_add_group_info() in commit 5f21b0e6 so that online
resize would use a common (and correct) codepath. Unfortunately, the
call to the new ext4_mb_add_group_info() function was added without
removing the code which originally allocated the array. This caused a
memory leak each time an ext4 filesystem was mounted.
The fix is simple; remove the code that did the original allocation,
since it is no longer needed.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The syncing is now properly handled by generic_file_aio_write() so
no special ext4 code is needed.
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Signed-off-by: Jan Kara <jack@suse.cz>
Don't implement per-filesystem 'extX_permission()' functions that have
to be called for every path component operation, and instead just expose
the actual ACL checking so that the VFS layer can now do it for us.
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix race between write_metadata_buffer and get_write_access
ext4: Fix ext4_mb_initialize_context() to initialize all fields
ext4: fix null handler of ioctls in no journal mode
ext4: Fix buffer head reference leak in no-journal mode
ext4: Move __ext4_journalled_writepage() to avoid forward declaration
ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc
ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation
ext4: Don't look at buffer_heads outside i_size.
ext4: Fix goal inum check in the inode allocator
ext4: fix no journal corruption with locale-gen
ext4: Calculate required journal credits for inserting an extent properly
ext4: Fix truncation of symlinks after failed write
jbd2: Fix a race between checkpointing code and journal_get_write_access()
ext4: Use rcu_barrier() on module unload.
ext4: naturally align struct ext4_allocation_request
ext4: mark several more functions in mballoc.c as noinline
ext4: Fix potential reclaim deadlock when truncating partial block
jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
ext4: Fix type warning on 64-bit platforms in tracing events header
Pavel Roskin pointed out that kmemcheck indicated that
ext4_mb_store_history() was accessing uninitialized values of
ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc
history. Fix this by initializing the entire structure to all zeros
first.
Also, two fields were getting doubly initialized by the caller of
ext4_mb_initialize_context, so remove them for efficiency's sake.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode. Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:
BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000
Oops: 0002 [#1] SMP
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We found a problem with buffer head reference leaks when using an ext4
partition without a journal. In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.
Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem. The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
helpers: get_cached_acl(inode, type), set_cached_acl(inode, type, acl),
forget_cached_acl(inode, type).
ubifs/xattr.c needed includes reordered, the rest is a plain switchover.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Follow-up to "block: enable by default support for large devices
and files on 32-bit archs".
Rename CONFIG_LBD to CONFIG_LBDAF to:
- allow update of existing [def]configs for "default y" change
- reflect that it is used also for large files support nowadays
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem
to do POSIX ACL checks on any files not owned by the caller, and it does
this for every single pathname component that it looks up.
That obviously can be pretty expensive if the filesystem isn't careful
about it, especially with locking. That's doubly sad, since the common
case tends to be that there are no ACL's associated with the files in
question.
ext4 already caches the ACL data so that it doesn't have to look it up
over and over again, but it does so by taking the inode->i_lock spinlock
on every lookup. Which is a noticeable overhead even if it's a private
lock, especially on CPU's where the serialization is expensive (eg Intel
Netburst aka 'P4').
For the special case of not actually having any ACL's, all that locking is
unnecessary. Even if somebody else were to be changing the ACL's on
another CPU, we simply don't care - if we've seen a NULL ACL, we might as
well use it.
So just load the ACL speculatively without any locking, and if it was
NULL, just use it. If it's non-NULL (either because we had a cached
entry, or because the cache hasn't been filled in at all), it means that
we'll need to get the lock and re-load it properly.
(This commit was ported from a patch originally authored by Linus for
ext3.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The VFS handles updating ctime, so we don't need to update the inode's
ctime in ext4_splace_branch() to update the direct or indirect blocks.
This was harmless when we did this in ext3, but in ext4, thanks to
delayed allocation, updating the ctime in ext4_splice_branch() can
cause the ctime to mysteriously jump when the blocks are finally
allocated.
Thanks to Björn Steinbrink for pointing out this problem on the git
mailing list.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch fixes the mmap/truncate race that was fixed for delayed
allocation by merging ext4_{journalled,normal,da}_writepage() into
ext4_writepage().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is possible to see buffer_heads which are not mapped in the
writepage callback in the following scneario (where the fs blocksize
is 1k and the page size is 4k):
1) truncate(f, 1024)
2) mmap(f, 0, 4096)
3) a[0] = 'a'
4) truncate(f, 4096)
5) writepage(...)
Now if we get a writepage callback immediately after (4) and before an
attempt to write at any other offset via mmap address (which implies we
are yet to get a pagefault and do a get_block) what we would have is the
page which is dirty have first block allocated and the other three
buffer_heads unmapped.
In the above case the writepage should go ahead and try to write the
first blocks and clear the page_dirty flag. Further attempts to write
to the page will again create a fault and result in allocating blocks
and marking page dirty. If we don't write any other offset via mmap
address we would still have written the first block to the disk and
rest of the space will be considered as a hole.
So to address this, we change all of the places where we look for
delayed, unmapped, or unwritten buffer heads, and only check for
delayed or unwritten buffer heads instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_mb_free_blocks() was using an "unsigned long" to
pass a block number; this will cause 64-bit block numbers to get
truncated on x86 and other 32-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.
The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.
Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal. This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of using a random number to determine the goal parent grop for
the Orlov top directories, use a hash of the directory name. This
allows for repeatable results when trying to benchmark filesystem
layout algorithms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're running out of space in the mount options word, and
EXT4_MOUNT_ABORT isn't really a mount option, but a run-time flag. So
move it to become EXT4_MF_FS_ABORTED in s_mount_flags.
Also remove bogus ext2_fs.h / ext4.h simultaneous #include protection,
which can never happen.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This field can be very helpful when a system administrator is trying
to sort through large numbers of block devices or filesystem images.
What is stored in this field can be ambiguous if multiple filesystem
namespaces are in play; what we store in practice is the mountpoint
interpreted by the process's namespace which first opens a file in the
filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can only fit 32 options in s_mount_opt because an unsigned long is
32-bits on a x86 machine. So use an unsigned int to save space on
64-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EXT4_IOC_MOVE_EXT exchanges the blocks between orig_fd and donor_fd,
and then write the file data of orig_fd to donor_fd.
ext4_mext_move_extent() is the main fucntion of ext4 online defrag,
and this patch includes all functions related to ext4 online defrag.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Push down lock_super into ->write_super instances and remove it from the
caller.
Following filesystem don't need ->s_lock in ->write_super and are skipped:
* bfs, nilfs2 - no other uses of s_lock and have internal locks in
->write_super
* ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
* reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
->write_super
* xfs - no other uses of s_lock and uses internal lock (buffer lock on
superblock buffer) to serialize ->write_super. Also xfs_fs_write_super
is superflous and will go away in the next merge window
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own. Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").
[folded a build fix from hch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can't run into contention on it. All other callers of lock_super()
either hold s_umount (and we have it exclusive) or hold an active
reference to superblock in question, which prevents the call of
generic_shutdown_super() while the reference is held. So we can
replace lock_super(s) with get_fs_excl() in generic_shutdown_super()
(and corresponding change for unlock_super(), of course).
Since ext4 expects s_lock held for its put_super, take lock_super()
into it. The rest of filesystems do not care at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.
Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.
Exceptions:
- affs already has identical copy & pasted code at the beginning of
affs_put_super so no need to do it twice.
- xfs does the right thing without it and I have changes pending for
the xfs tree touching this are so I don't really need conflicts
here..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
The unitialized bit was not properly getting preserved in in an extent
which is partially truncated because the it was geting set to the
value of the first extent to be removed or truncated as part of the
truncate operation, and if there are multiple extents are getting
removed or modified as part of the truncate operation, it is only the
last extent which will might be partially truncated, and its
uninitalized bit is not necessarily the same as the first extent to be
truncated.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a non-existent file is opened via O_WRONLY|O_CREAT|O_TRUNC, there's
no need to treat this as a true file truncation, so we shouldn't
activate the replace-via-truncate hueristic.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dx_map_entry structure doesn't support over 64KB block size by
current usage of its member("offs"). Because "offs" treats an offset
of copies of the ext4_dir_entry_2 structure as is. This member size is
16 bits. But real offset for over 64KB(256KB) block size needs 18
bits. However, real offset keeps 4 byte boundary, so lower 2 bits is
not used.
Therefore, we do the following to fix this limitation:
For "store":
we divide the real offset by 4 and then store this result to "offs"
member.
For "use":
we multiply "offs" member by 4 and then use this result
as real offset.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In generic_perform_write if we fail to copy the user data we don't
update the inode->i_size. We should truncate the file in the above
case so that we don't have blocks allocated outside inode->i_size. Add
the inode to orphan list in the same transaction as block allocation
This ensures that if we crash in between the recovery would do the
truncate.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We should add inode to the orphan list in the same transaction
as block allocation. This ensures that if we crash after a failed
block allocation and before we do a vmtruncate we don't leak block
(ie block marked as used in bitmap but not claimed by the inode).
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
