Conversion of nr_bounce to a per zone counter
nr_bounce is only used for proc output. So it could be left as an event
counter. However, the event counters may not be accurate and nr_bounce is
categorizing types of pages in a zone. So we really need this to also be a
per zone counter.
[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conversion of nr_unstable to a per zone counter
We need to do some special modifications to the nfs code since there are
multiple cases of disposition and we need to have a page ref for proper
accounting.
This converts the last critical page state of the VM and therefore we need to
remove several functions that were depending on GET_PAGE_STATE_LAST in order
to make the kernel compile again. We are only left with event type counters
in page state.
[akpm@osdl.org: bugfixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conversion of nr_writeback to per zone counter.
This removes the last page_state counter from arch/i386/mm/pgtable.c so we
drop the page_state from there.
[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This makes nr_dirty a per zone counter. Looping over all processors is
avoided during writeback state determination.
The counter aggregation for nr_dirty had to be undone in the NFS layer since
we summed up the page counts from multiple zones. Someone more familiar with
NFS should probably review what I have done.
[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conversion of nr_page_table_pages to a per zone counter
[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Allows reclaim to access counter without looping over processor counts.
- Allows accurate statistics on how many pages are used in a zone by
the slab. This may become useful to balance slab allocations over
various zones.
[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The current NR_FILE_MAPPED is used by zone reclaim and the dirty load
calculation as the number of mapped pagecache pages. However, that is not
true. NR_FILE_MAPPED includes the mapped anonymous pages. This patch
separates those and therefore allows an accurate tracking of the anonymous
pages per zone.
It then becomes possible to determine the number of unmapped pages per zone
and we can avoid scanning for unmapped pages if there are none.
Also it may now be possible to determine the mapped/unmapped ratio in
get_dirty_limit. Isnt the number of anonymous pages irrelevant in that
calculation?
Note that this will change the meaning of the number of mapped pages reported
in /proc/vmstat /proc/meminfo and in the per node statistics. This may affect
user space tools that monitor these counters! NR_FILE_MAPPED works like
NR_FILE_DIRTY. It is only valid for pagecache pages.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently a single atomic variable is used to establish the size of the page
cache in the whole machine. The zoned VM counters have the same method of
implementation as the nr_pagecache code but also allow the determination of
the pagecache size per zone.
Remove the special implementation for nr_pagecache and make it a zoned counter
named NR_FILE_PAGES.
Updates of the page cache counters are always performed with interrupts off.
We can therefore use the __ variant here.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nr_mapped is important because it allows a determination of how many pages of
a zone are not mapped, which would allow a more efficient means of determining
when we need to reclaim memory in a zone.
We take the nr_mapped field out of the page state structure and define a new
per zone counter named NR_FILE_MAPPED (the anonymous pages will be split off
from NR_MAPPED in the next patch).
We replace the use of nr_mapped in various kernel locations. This avoids the
looping over all processors in try_to_free_pages(), writeback, reclaim (swap +
zone reclaim).
[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the i386 VDSO down into a vma and thus randomize it.
Besides the security implications, this feature also helps debuggers, which
can COW a vma-backed VDSO just like a normal DSO and can thus do
single-stepping and other debugging features.
It's good for hypervisors (Xen, VMWare) too, which typically live in the same
high-mapped address space as the VDSO, hence whenever the VDSO is used, they
get lots of guest pagefaults and have to fix such guest accesses up - which
slows things down instead of speeding things up (the primary purpose of the
VDSO).
There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support
for older glibcs that still rely on a prelinked high-mapped VDSO. Newer
distributions (using glibc 2.3.3 or later) can turn this option off. Turning
it off is also recommended for security reasons: attackers cannot use the
predictable high-mapped VDSO page as syscall trampoline anymore.
There is a new vdso=[0|1] boot option as well, and a runtime
/proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned
on/off.
(This version of the VDSO-randomization patch also has working ELF
coredumping, the previous patch crashed in the coredumping code.)
This code is a combined work of the exec-shield VDSO randomization
code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell
started this patch and i completed it.
[akpm@osdl.org: cleanups]
[akpm@osdl.org: compile fix]
[akpm@osdl.org: compile fix 2]
[akpm@osdl.org: compile fix 3]
[akpm@osdl.org: revernt MAXMEM change]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Cc: Gerd Hoffmann <kraxel@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Below is a patch to add a new /proc/self/attr/sockcreate A process may write a
context into this interface and all subsequent sockets created will be labeled
with that context. This is the same idea as the fscreate interface where a
process can specify the label of a file about to be created. At this time one
envisioned user of this will be xinetd. It will be able to better label
sockets for the actual services. At this time all sockets take the label of
the creating process, so all xinitd sockets would just be labeled the same.
I tested this by creating a tcp sender and listener. The sender was able to
write to this new proc file and then create sockets with the specified label.
I am able to be sure the new label was used since the avc denial messages
kicked out by the kernel included both the new security permission
setsockcreate and all the socket denials were for the new label, not the label
of the running process.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Try to make next_tid() a bit more readable and deletes unnecessary
"pid_alive(pos)" check.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
first_tid:
/* If nr exceeds the number of threads there is nothing todo */
if (nr) {
if (nr >= get_nr_threads(leader))
goto done;
}
This is not reliable: sub-threads can exit after this check, so the
'for' loop below can overlap and proc_task_readdir() can return an
already filldir'ed dirents.
for (; pos && pid_alive(pos); pos = next_thread(pos)) {
if (--nr > 0)
continue;
Off-by-one error, will return 'leader' when nr == 1.
This patch tries to fix these problems and simplify the code.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is just like my previous removal of tasklist_lock from first_tgid, and
next_tgid. It simply had to wait until it was rcu safe to walk the thread
list.
This should be the last instance of the tasklist_lock in proc. So user
processes should not be able to influence the tasklist lock hold times.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In process of getting proc_fd_access_allowed to work it has developed a few
warts. In particular the special case that always allows introspection and
the special case to allow inspection of kernel threads.
The special case for introspection is needed for /proc/self/mem.
The special case for kernel threads really should be overridable
by security modules.
So consolidate these checks into ptrace.c:may_attach().
The check to always allow introspection is trivial.
The check to allow access to kernel threads, and zombies is a little
trickier. mem_read and mem_write already verify an mm exists so it isn't
needed twice. proc_fd_access_allowed only doesn't want a check to verify
task->mm exits, s it prevents all access to kernel threads. So just move
the task->mm check into ptrace_attach where it is needed for practical
reasons.
I did a quick audit and none of the security modules in the kernel seem to
care if they are passed a task without an mm into security_ptrace. So the
above move should be safe and it allows security modules to come up with
more restrictive policy.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since 2.2 we have been doing a chroot check to see if it is appropriate to
return a read or follow one of these magic symlinks. The chroot check was
asking a question about the visibility of files to the calling process and
it was actually checking the destination process, and not the files
themselves. That test was clearly bogus.
In my first pass through I simply fixed the test to check the visibility of
the files themselves. That naive approach to fixing the permissions was
too strict and resulted in cases where a task could not even see all of
it's file descriptors.
What has disturbed me about relaxing this check is that file descriptors
are per-process private things, and they are occasionaly used a user space
capability tokens. Looking a little farther into the symlink path on /proc
I did find userid checks and a check for capability (CAP_DAC_OVERRIDE) so
there were permissions checking this.
But I was still concerned about privacy. Besides /proc there is only one
other way to find out this kind of information, and that is ptrace. ptrace
has been around for a long time and it has a well established security
model.
So after thinking about it I finally realized that the permission checks
that make sense are the permission checks applied to ptrace_attach. The
checks are simple per process, and won't cause nasty surprises for people
coming from less capable unices.
Unfortunately there is one case that the current ptrace_attach test does
not cover: Zombies and kernel threads. Single stepping those kinds of
processes is impossible. Being able to see which file descriptors are open
on these tasks is important to lsof, fuser and friends. So for these
special processes I made the rule you can't find out unless you have
CAP_SYS_PTRACE.
These proc permission checks should now conform to the principle of least
surprise. As well as using much less code to implement :)
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code doesn't need to sleep to when making this check so I can just do the
comparison and not worry about the reference counts.
TODO: While looking at this I realized that my original cleanup did not push
the permission check far enough down into the stack. The call of
proc_check_dentry_visible needs to move out of the generic proc
readlink/follow link code and into the individual get_link instances.
Otherwise the shared resources checks are not quite correct (shared
files_struct does not require a shared fs_struct), and there are races with
unshare.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Incrementally update my proc-dont-lock-task_structs-indefinitely patches so
that they work with struct pid instead of struct task_ref.
Mostly this is a straight 1-1 substitution.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Every inode in /proc holds a reference to a struct task_struct. If a
directory or file is opened and remains open after the the task exits this
pinning continues. With 8K stacks on a 32bit machine the amount pinned per
file descriptor is about 10K.
Normally I would figure a reasonable per user process limit is about 100
processes. With 80 processes, with a 1000 file descriptors each I can trigger
the 00M killer on a 32bit kernel, because I have pinned about 800MB of useless
data.
This patch replaces the struct task_struct pointer with a pointer to a struct
task_ref which has a struct task_struct pointer. The so the pinning of dead
tasks does not happen.
The code now has to contend with the fact that the task may now exit at any
time. Which is a little but not muh more complicated.
With this change it takes about 1000 processes each opening up 1000 file
descriptors before I can trigger the OOM killer. Much better.
[mlp@google.com: task_mmu small fixes]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Paul Jackson <pj@sgi.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Albert Cahalan <acahalan@gmail.com>
Signed-off-by: Prasanna Meda <mlp@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently in /proc at several different places we define buffers to hold a
process id, or a file descriptor . In most of them we use either a hard coded
number or a different define. Modify them all to use PROC_NUMBUF, so the code
has a chance of being maintained.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Like the bug Oleg spotted in first_tid there was also a small off by one
error in first_tgid, when a seek was done on the /proc directory. This
fixes that and changes the code structure to make it a little more obvious
what is going on.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since we no longer need the tasklist_lock for get_task_struct the lookup
methods no longer need the tasklist_lock.
This just depends on my previous patch that makes get_task_struct() rcu
safe.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We don't need the tasklist_lock to safely iterate through processes
anymore.
This depends on my previous to task patches that make get_task_struct rcu
safe, and that make next_task() rcu safe. I haven't gotten
first_tid/next_tid yet only because next_thread is missing an
rcu_dereference.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There are a couple of problems this patch addresses.
- /proc/<tgid>/task currently does not work correctly if you stop reading
in the middle of a directory.
- /proc/ currently requires a full pass through the task list with
the tasklist lock held, to determine there are no more processes to read.
- The hand rolled integer to string conversion does not properly running
out of buffer space.
- We seem to be batching reading of pids from the tasklist without reason,
and complicating the logic of the code.
This patch addresses that by changing how tasks are processed. A
first_<task_type> function is built that handles restarts, and a
next_<task_type> function is built that just advances to the next task.
first_<task_type> when it detects a restart usually uses find_task_by_pid. If
that doesn't work because there has been a seek on the directory, or we have
already given a complete directory listing, it first checks the number tasks
of that type, and only if we are under that count does it walk through all of
the tasks to find the one we are interested in.
The code that fills in the directory is simpler because there is only a single
for loop.
The hand rolled integer to string conversion is replaced by snprintf which
should handle the the out of buffer case correctly.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
proc_lookup and task exiting are not synchronized, although some of the
previous code may have suggested that. Every time before we reuse a dentry
namei.c calls d_op->derevalidate which prevents us from reusing a stale dcache
entry. Unfortunately it does not prevent us from returning a stale dcache
entry. This race has been explicitly plugged in proc_pid_lookup but there is
nothing to confine it to just that proc lookup function.
So to prevent the race I call revalidate explictily in all of the proc lookup
functions after I call d_add, and report an error if the revalidate does not
succeed.
Years ago Al Viro did something similar but those changes got lost in the
churn.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To keep the dcache from filling up with dead /proc entries we flush them on
process exit. However over the years that code has gotten hairy with a
dentry_pointer and a lock in task_struct and misdocumented as a correctness
feature.
I have rewritten this code to look and see if we have a corresponding entry in
the dcache and if so flush it on process exit. This removes the extra fields
in the task_struct and allows me to trivially handle the case of a
/proc/<tgid>/task/<pid> entry as well as the current /proc/<pid> entries.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
All of the functions for proc_maps_operations are already defined in
task_mmu.c so move the operations structure to keep the functionality
together.
Since task_nommu.c implements a dummy version of /proc/<pid>/maps give it a
simplified version of proc_maps_operations that it can modify to best suit its
needs.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use getattr to get an accurate link count when needed. This is cheaper and
more accurate than trying to derive it by walking the thread list of a
process.
Especially as it happens when needed stat instead of at readdir time.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Long ago and far away in 2.2 we started checking to ensure the files we
displayed in /proc were visible to the current process. It was an
unsophisticated time and no one was worried about functions full of FIXMES in
a stable kernel. As time passed the function became sacred and was enshrined
in the shrine of how things have always been. The fixes came in but only to
keep the function working no one really remembering or documenting why we did
things that way.
The intent and the functionality make a lot of sense. Don't let /proc be an
access point for files a process can see no other way. The implementation
however is completely wrong.
We are currently checking the root directories of the two processes, we are
not checking the actual file descriptors themselves.
We are strangely checking with a permission method instead of just when we use
the data.
This patch fixes the logic to actually check the file descriptors and make a
note that implementing a permission method for this part of /proc almost
certainly indicates a bug in the reasoning.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The inode operations only exist to support the proc_permission function.
Currently mem_read and mem_write have all the same permission checks as
ptrace. The fs check makes no sense in this context, and we can trivially get
around it by calling ptrace.
So simply the code by killing the strange weird case.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
First we can access every /proc/<tgid>/task/<pid> directory as /proc/<pid> so
proc_task_permission is not usefully limiting visibility.
Second having related filesystems information should have nothing to do with
process visibility. kill does not implement any checks like that.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The sole renaming use of proc_inode.type is to discover the file descriptor
number, so just store the file descriptor number and don't wory about
processing this field. This removes any /proc limits on the maximum number of
file descriptors, and clears the path to make the hard coded /proc inode
numbers go away.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently in /proc if the task is dumpable all of files are owned by the tasks
effective users. Otherwise the files are owned by root. Unless it is the
/proc/<tgid>/ or /proc/<tgid>/task/<pid> directory in that case we always make
the directory owned by the effective user.
However the special case for directories is pointless except as a way to read
the effective user, because the permissions on both of those directories are
world readable, and executable.
/proc/<tgid>/status provides a much better way to read a processes effecitve
userid, so it is silly to try to provide that on the directory.
So this patch simplifies the code by removing a pointless special case and
gets us one step closer to being able to remove the hard coded /proc inode
numbers.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The removed fields are already set by proc_alloc_inode. Initializing them in
proc_alloc_inode implies they need it for proper cleanup. At least ei->pde
was not set on all paths making it look like proc_alloc_inode was buggy. So
just remove the redundant assignments.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We already call everything except do_proc_readlink outside of the BKL in
proc_pid_followlink, and there appears to be nothing in do_proc_readlink that
needs any special protection.
So remove this leftover from one of the BKL cleanup efforts.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a /proc/<pid>/attr/keycreate entry that stores the appropriate context for
newly-created keys. Modify the selinux_key_alloc hook to make use of the new
entry. Update the flask headers to include a new "setkeycreate" permission
for processes. Update the flask headers to include a new "create" permission
for keys. Use the create permission to restrict which SIDs each task can
assign to newly-created keys. Add a new parameter to the security hook
"security_key_alloc" to indicate whether it is being invoked by the kernel, or
from userspace. If it is being invoked by the kernel, the security hook
should never fail. Update the documentation to reflect these changes.
Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.
The filesystem is then required to manually set the superblock and root dentry
pointers. For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).
The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.
This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing. In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.
The patch also makes the following changes:
(*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
pointer argument and return an integer, so most filesystems have to change
very little.
(*) If one of the convenience function is not used, then get_sb() should
normally call simple_set_mnt() to instantiate the vfsmount. This will
always return 0, and so can be tail-called from get_sb().
(*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
dcache upon superblock destruction rather than shrink_dcache_anon().
This is required because the superblock may now have multiple trees that
aren't actually bound to s_root, but that still need to be cleaned up. The
currently called functions assume that the whole tree is rooted at s_root,
and that anonymous dentries are not the roots of trees which results in
dentries being left unculled.
However, with the way NFS superblock sharing are currently set to be
implemented, these assumptions are violated: the root of the filesystem is
simply a dummy dentry and inode (the real inode for '/' may well be
inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
with child trees.
[*] Anonymous until discovered from another tree.
(*) The documentation has been adjusted, including the additional bit of
changing ext2_* into foo_* in the documentation.
[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There are places in the kernel where we look up files in fd tables and
access the file structure without holding refereces to the file. So, we
need special care to avoid the race between looking up files in the fd
table and tearing down of the file in another CPU. Otherwise, one might
see a NULL f_dentry or such torn down version of the file. This patch
fixes those special places where such a race may happen.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A couple of /proc/vmcore data structures overflow with 32bit systems having
memory more than 4G. This patch fixes those.
Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
proc_check_chroot() does the check in a very unintuitive way (keeping a
copy of the argument, then modifying the argument), and has uncommented
sideeffects.
Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make baby-simple the code for /proc/devices. Based on the proven design
for /proc/interrupts.
This also fixes the early-termination regression 2.6.16 introduced, as
demonstrated by:
# dd if=/proc/devices bs=1
Character devices:
1 mem
27+0 records in
27+0 records out
This should also work (but is untested) when /proc/devices >4096 bytes,
which I believe is what the original 2.6.16 rewrite fixed.
[akpm@osdl.org: cleanups, simplifications]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark the f_ops members of inodes as const, as well as fix the
ripple-through this causes by places that copy this f_ops and then "do
stuff" with it.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Various dodgy firmware might give us nodes and/or properties in the device
tree with conflicting names. That's generally ok, except for when we export
the device tree via /proc, so check when we're creating the proc device tree
and munge names accordingly.
Tested on a faked device tree with kexec, would be good if someone with
actual bogus firmware could try it, but just for completeness.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
