Ingo Molnar reported the following kmemcheck warning when running both
kmemleak and kmemcheck enabled:
PM: Adding info for No Bus:vcsa7
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory
(f6f6e1a4)
d873f9f600000000c42ae4c1005c87f70000000070665f666978656400000000
i i i i u u u u i i i i i i i i i i i i i i i i i i i i i u u u
^
Pid: 3091, comm: kmemleak Not tainted (2.6.31-rc7-tip #1303) P4DC6
EIP: 0060:[<c110301f>] EFLAGS: 00010006 CPU: 0
EIP is at scan_block+0x3f/0xe0
EAX: f40bd700 EBX: f40bd780 ECX: f16b46c0 EDX: 00000001
ESI: f6f6e1a4 EDI: 00000000 EBP: f10f3f4c ESP: c2605fcc
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: e89a4844 CR3: 30ff1000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff4ff0 DR7: 00000400
[<c110313c>] scan_object+0x7c/0xf0
[<c1103389>] kmemleak_scan+0x1d9/0x400
[<c1103a3c>] kmemleak_scan_thread+0x4c/0xb0
[<c10819d4>] kthread+0x74/0x80
[<c10257db>] kernel_thread_helper+0x7/0x3c
[<ffffffff>] 0xffffffff
kmemleak: 515 new suspected memory leaks (see
/sys/kernel/debug/kmemleak)
kmemleak: 42 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
The problem here is that kmemleak will scan partially initialized
objects that makes kmemcheck complain. Fix that up by skipping
uninitialized memory regions when kmemcheck is enabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Introducing printing of the objects hex dump to the seq file.
The number of lines to be printed is limited to HEX_MAX_LINES
to prevent seq file spamming. The actual number of printed
bytes is less than or equal to (HEX_MAX_LINES * HEX_ROW_SIZE).
(slight adjustments by Catalin Marinas)
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch sets the min_count for alloc_bootmem objects to 0 so that
they are never reported as leaks. This is because many of these blocks
are only referred via the physical address which is not looked up by
kmemleak.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Before slab is initialised, kmemleak save the allocations in an early
log buffer. They are later recorded as normal memory allocations. This
patch adds the stack trace saving to the early log buffer, otherwise the
information shown for such objects only refers to the kmemleak_init()
function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This buffer isn't needed after kmemleak was initialised so it can be
freed together with the .init.data section. This patch also marks
functions conditionally accessing the early log variables with __ref.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
By writing dump=<addr> to the kmemleak file, kmemleak will look up an
object with that address and dump the information it has about it to
syslog. This is useful in debugging memory leaks.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If the object size is bigger than a predefined value (4K in this case),
release the object lock during scanning and call cond_resched().
Re-acquire the lock after rescheduling and test whether the object is
still valid.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
An mlocked page might lose the isolatation race. This causes the page to
clear PG_mlocked while it remains in a VM_LOCKED vma. This means it can
be put onto the [in]active list. We can rescue it by using try_to_unmap()
in shrink_page_list().
But now, As Wu Fengguang pointed out, vmscan has a bug. If the page has
PG_referenced, it can't reach try_to_unmap() in shrink_page_list() but is
put into the active list. If the page is referenced repeatedly, it can
remain on the [in]active list without being moving to the unevictable
list.
This patch fixes it.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <<kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: use the right flag for get_vm_area()
percpu, sparc64: fix sparse possible cpu map handling
init: set nr_cpu_ids before setup_per_cpu_areas()
If node_load[] is cleared everytime build_zonelists() is
called,node_load[] will have no help to find the next node that should
appear in the given node's fallback list.
Because of the bug, zonelist's node_order is not calculated as expected.
This bug affects on big machine, which has asynmetric node distance.
[synmetric NUMA's node distance]
0 1 2
0 10 12 12
1 12 10 12
2 12 12 10
[asynmetric NUMA's node distance]
0 1 2
0 10 12 20
1 12 10 14
2 20 14 10
This (my bug) is very old but no one has reported this for a long time.
Maybe because the number of asynmetric NUMA is very small and they use
cpuset for customizing node memory allocation fallback.
[akpm@linux-foundation.org: fix CONFIG_NUMA=n build]
Signed-off-by: Bo Liu <bo-liu@hotmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to the POSIX (1003.1-2008), the file descriptor shall have been
opened with read permission, regardless of the protection options specified to
mmap(). The ltp test cases mmap06/07 need this.
Signed-off-by: Graff Yang <graff.yang@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit 2ff05b2b (oom: move oom_adj value) moveed the oom_adj value to
the mm_struct. It was a very good first step for sanitize OOM.
However Paul Menage reported the commit makes regression to his job
scheduler. Current OOM logic can kill OOM_DISABLED process.
Why? His program has the code of similar to the following.
...
set_oom_adj(OOM_DISABLE); /* The job scheduler never killed by oom */
...
if (vfork() == 0) {
set_oom_adj(0); /* Invoked child can be killed */
execve("foo-bar-cmd");
}
....
vfork() parent and child are shared the same mm_struct. then above
set_oom_adj(0) doesn't only change oom_adj for vfork() child, it's also
change oom_adj for vfork() parent. Then, vfork() parent (job scheduler)
lost OOM immune and it was killed.
Actually, fork-setting-exec idiom is very frequently used in userland program.
We must not break this assumption.
Then, this patch revert commit 2ff05b2b and related commit.
Reverted commit list
---------------------
- commit 2ff05b2b4e (oom: move oom_adj value from task_struct to mm_struct)
- commit 4d8b9135c3 (oom: avoid unnecessary mm locking and scanning for OOM_DISABLE)
- commit 8123681022 (oom: only oom kill exiting tasks with attached memory)
- commit 933b787b57 (mm: copy over oom_adj value at fork time)
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently SELinux enforcement of controls on the ability to map low memory
is determined by the mmap_min_addr tunable. This patch causes SELinux to
ignore the tunable and instead use a seperate Kconfig option specific to how
much space the LSM should protect.
The tunable will now only control the need for CAP_SYS_RAWIO and SELinux
permissions will always protect the amount of low memory designated by
CONFIG_LSM_MMAP_MIN_ADDR.
This allows users who need to disable the mmap_min_addr controls (usual reason
being they run WINE as a non-root user) to do so and still have SELinux
controls preventing confined domains (like a web server) from being able to
map some area of low memory.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
get_vm_area() only accepts VM_* flags, not GFP_*.
And according to the doc of get_vm_area(), here should be
VM_ALLOC.
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
percpu code has been assuming num_possible_cpus() == nr_cpu_ids which
is incorrect if cpu_possible_map contains holes. This causes percpu
code to access beyond allocated memories and vmalloc areas. On a
sparc64 machine with cpus 0 and 2 (u60), this triggers the following
warning or fails boot.
WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240()
Modules linked in:
Call Trace:
[00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240
[00000000004b1840] map_vm_area+0x20/0x60
[00000000004b1950] __vmalloc_area_node+0xd0/0x160
[0000000000593434] deflate_init+0x14/0xe0
[0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0
[00000000005844f0] crypto_alloc_base+0x50/0xa0
[000000000058b898] alg_test_comp+0x18/0x80
[000000000058dad4] alg_test+0x54/0x180
[000000000058af00] cryptomgr_test+0x40/0x60
[0000000000473098] kthread+0x58/0x80
[000000000042b590] kernel_thread+0x30/0x60
[0000000000472fd0] kthreadd+0xf0/0x160
---[ end trace 429b268a213317ba ]---
This patch fixes generic percpu functions and sparc64
setup_per_cpu_areas() so that they handle sparse cpu_possible_map
properly.
Please note that on x86, cpu_possible_map() doesn't contain holes and
thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause
any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
clean up type-casting twice. "size_t" is typedef as "unsigned long" in
64-bit system, and "unsigned int" in 32-bit system, and the intermediate
cast to 'long' is pointless.
Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At first, init_task's mems_allowed is initialized as this.
init_task->mems_allowed == node_state[N_POSSIBLE]
And cpuset's top_cpuset mask is initialized as this
top_cpuset->mems_allowed = node_state[N_HIGH_MEMORY]
Before 2.6.29:
policy's mems_allowed is initialized as this.
1. update tasks->mems_allowed by its cpuset->mems_allowed.
2. policy->mems_allowed = nodes_and(tasks->mems_allowed, user's mask)
Updating task's mems_allowed in reference to top_cpuset's one.
cpuset's mems_allowed is aware of N_HIGH_MEMORY, always.
In 2.6.30: After commit 58568d2a82
("cpuset,mm: update tasks' mems_allowed in time"), policy's mems_allowed
is initialized as this.
1. policy->mems_allowd = nodes_and(task->mems_allowed, user's mask)
Here, if task is in top_cpuset, task->mems_allowed is not updated from
init's one. Assume user excutes command as #numactrl --interleave=all
,....
policy->mems_allowd = nodes_and(N_POSSIBLE, ALL_SET_MASK)
Then, policy's mems_allowd can includes a possible node, which has no pgdat.
MPOL's INTERLEAVE just scans nodemask of task->mems_allowd and access this
directly.
NODE_DATA(nid)->zonelist even if NODE_DATA(nid)==NULL
Then, what's we need is making policy->mems_allowed be aware of
N_HIGH_MEMORY. This patch does that. But to do so, extra nodemask will
be on statck. Because I know cpumask has a new interface of
CPUMASK_ALLOC(), I added it to node.
This patch stands on old behavior. But I feel this fix itself is just a
Band-Aid. But to do fundametal fix, we have to take care of memory
hotplug and it takes time. (task->mems_allowd should be N_HIGH_MEMORY, I
think.)
mpol_set_nodemask() should be aware of N_HIGH_MEMORY and policy's nodemask
should be includes only online nodes.
In old behavior, this is guaranteed by frequent reference to cpuset's
code. Now, most of them are removed and mempolicy has to check it by
itself.
To do check, a few nodemask_t will be used for calculating nodemask. But,
size of nodemask_t can be big and it's not good to allocate them on stack.
Now, cpumask_t has CPUMASK_ALLOC/FREE an easy code for get scratch area.
NODEMASK_ALLOC/FREE shoudl be there.
[akpm@linux-foundation.org: cleanups & tweaks]
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator warns once when an order >= MAX_ORDER is specified.
This is to catch callers of the allocator that are always falling back to
their worst-case when it was not expected. However, there are cases where
the caller is behaving correctly but cannot suppress the warning. This
patch allows the warning to be suppressed by the callers by specifying
__GFP_NOWARN.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit ec64f51545 ("cgroup: fix
frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg)
doesn't return -EBUSY by temporary ref counts. That commit expects all
refs after pre_destroy() is temporary but...it wasn't. Then, rmdir can
wait permanently. This patch tries to fix that and change followings.
- set CGRP_WAIT_ON_RMDIR flag before pre_destroy().
- clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case.
if there are sleeping ones, wakes them up.
- rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set.
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Paul Menage <menage@google.com>
Acked-by: Balbir Sigh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reported in Red Hat bz #509671, i_blocks for files on hugetlbfs get
accounting wrong when doing something like:
$ > foo
$ date > foo
date: write error: Invalid argument
$ /usr/bin/stat foo
File: `foo'
Size: 0 Blocks: 18446744073709547520 IO Block: 2097152 regular
...
This is because hugetlb_unreserve_pages() is unconditionally removing
blocks_per_huge_page(h) on each call rather than using the freed amount.
If there were 0 blocks, it goes negative, resulting in the above.
This is a regression from commit a551643895
("hugetlb: modular state for hugetlb page size")
which did:
- inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed;
+ inode->i_blocks -= blocks_per_huge_page(h);
so just put back the freed multiplier, and it's all happy again.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a task is oom killed and still cannot find memory when trying with
no watermarks, it's better to fail the allocation attempt than to loop
endlessly. Direct reclaim has already failed and the oom killer will
be a no-op since current has yet to die, so there is no other
alternative for allocations that are not __GFP_NOFAIL.
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a post-2.6.24 performace regression caused by
3dfa5721f1 ("page-allocator: preserve PFN
ordering when __GFP_COLD is set").
Narayanan reports "The regression is around 15%. There is no disk controller
as our setup is based on Samsung OneNAND used as a memory mapped device on a
OMAP2430 based board."
The page allocator tries to preserve contiguous PFN ordering when returning
pages such that repeated callers to the allocator have a strong chance of
getting physically contiguous pages, particularly when external fragmentation
is low. However, of the bulk of the allocations have __GFP_COLD set as they
are due to aio_read() for example, then the PFNs are in reverse PFN order.
This can cause performance degration when used with IO controllers that could
have merged the requests.
This patch attempts to preserve the contiguous ordering of PFNs for users of
__GFP_COLD.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reported-by: Narayananu Gopalakrishnan <narayanan.g@samsung.com>
Tested-by: Narayanan Gopalakrishnan <narayanan.g@samsung.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create bdgrab(). This function copies an existing reference to a
block_device. It is safe to call from any context.
Hibernation code wishes to copy a reference to the active swap device.
Right now it calls bdget() under a spinlock, but this is wrong because
bdget() can sleep. It doesn't need a full bdget() because we already
hold a reference to active swap devices (and the spinlock protects
against swapoff).
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()
Upcoming paches to support the new 64-bit "BookE" powerpc architecture
will need to have the virtual address corresponding to PTE page when
freeing it, due to the way the HW table walker works.
Basically, the TLB can be loaded with "large" pages that cover the whole
virtual space (well, sort-of, half of it actually) represented by a PTE
page, and which contain an "indirect" bit indicating that this TLB entry
RPN points to an array of PTEs from which the TLB can then create direct
entries. Thus, in order to invalidate those when PTE pages are deleted,
we need the virtual address to pass to tlbilx or tlbivax instructions.
The old trick of sticking it somewhere in the PTE page struct page sucks
too much, the address is almost readily available in all call sites and
almost everybody implemets these as macros, so we may as well add the
argument everywhere. I added it to the pmd and pud variants for consistency.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV]
Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Remove alloc_bootmem annotations introduced in the past
kmemleak: Add callbacks to the bootmem allocator
kmemleak: Allow partial freeing of memory blocks
kmemleak: Trace the kmalloc_large* functions in slub
kmemleak: Scan objects allocated during a scanning episode
kmemleak: Do not acquire scan_mutex in kmemleak_open()
kmemleak: Remove the reported leaks number limitation
kmemleak: Add more cond_resched() calls in the scanning thread
kmemleak: Renice the scanning thread to +10
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
kmemleak_alloc() calls were added in some places where alloc_bootmem was
called. Since now kmemleak tracks bootmem allocations, these explicit
calls should be run.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
This patch adds kmemleak_alloc/free callbacks to the bootmem allocator.
This would allow scanning of such blocks and help avoiding a whole class
of false positives and more kmemleak annotations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Functions like free_bootmem() are allowed to free only part of a memory
block. This patch adds support for this via the kmemleak_free_part()
callback which removes the original object and creates one or two
additional objects as a result of the memory block split.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
The kmalloc_large() and kmalloc_large_node() functions were missed when
adding the kmemleak hooks to the slub allocator. However, they should be
traced to avoid false positives.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Many of the false positives in kmemleak happen on busy systems where
objects are allocated during a kmemleak scanning episode. These objects
aren't scanned by default until the next memory scan. When such object
is added, for example, at the head of a list, it is possible that all
the other objects in the list become unreferenced until the next scan.
This patch adds checking for newly allocated objects at the end of the
scan and repeats the scanning on these objects. If Linux allocates
new objects at a higher rate than their scanning, it stops after a
predefined number of passes.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Initially, the scan_mutex was acquired in kmemleak_open() and released
in kmemleak_release() (corresponding to /sys/kernel/debug/kmemleak
operations). This was causing some lockdep reports when the file was
closed from a different task than the one opening it. This patch moves
the scan_mutex acquiring in kmemleak_write() or kmemleak_seq_start()
with releasing in kmemleak_seq_stop().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since the leaks are no longer printed to the syslog, there is no point
in keeping this limitation. All the suspected leaks are shown on
/sys/kernel/debug/kmemleak file.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Following recent fix to no longer reschedule in the scan_block()
function, the system may become unresponsive with !PREEMPT. This patch
re-adds the cond_resched() call to scan_block() but conditioned by the
allow_resched parameter.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
SLAB: Fix lockdep annotations
fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b
These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0:
mm/page_alloc.c: In function 'alloc_pages_exact':
mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast
drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff':
drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast
[akpm@linux-foundation.org: fix kernel/perf_counter.c too]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In testing a backport of the write_begin/write_end AOPs, a 10% re-read
regression was noticed when running iozone. This regression was
introduced because the old AOPs would always do a mark_page_accessed(page)
after the commit_write, but when the new AOPs where introduced, the only
place this was kept was in pagecache_write_end().
This patch does the same thing in the generic case as what is done in
pagecache_write_end(), which is just to mark the page accessed before we
do write_end().
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: LCDC dcache flush for deferred io
sh: Fix compiler error and include the definition of IS_ERR_VALUE
sh: re-add LCDC fbdev support to the Migo-R defconfig
sh: fix se7724 ceu names
sh: ms7724se: Enable sh_eth in defconfig.
arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons
sh: ms7724se: Add sh_eth support
nommu: provide follow_pfn().
sh: Kill off unused DEBUG_BOOTMEM symbol.
perf_counter tools: add cpu_relax()/rmb() definitions for sh.
sh64: Hook up page fault events for software perf counters.
sh: Hook up page fault events for software perf counters.
sh: make set_perf_counter_pending() static inline.
clocksource: sh_tmu: Make undefined TCOR behaviour less undefined.
One of the kmemleak changes caused the following
scheduling-while-holding-the-tasklist-lock regression on x86:
BUG: sleeping function called from invalid context at mm/kmemleak.c:795
in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak
2 locks held by kmemleak/1737:
#0: (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86
#1: (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c
Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip #59266
Call Trace:
[<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20
[<c102e490>] __might_sleep+0x10a/0x111
[<c10c38d5>] scan_yield+0x17/0x3b
[<c10c3970>] scan_block+0x39/0xd4
[<c10c3bc6>] kmemleak_scan+0x1bb/0x39c
[<c10c4331>] ? kmemleak_scan_thread+0x0/0x86
[<c10c437b>] kmemleak_scan_thread+0x4a/0x86
[<c104d73e>] kthread+0x6e/0x73
[<c104d6d0>] ? kthread+0x0/0x73
[<c100959f>] kernel_thread_helper+0x7/0x10
kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
The bit causing it is highly dubious:
static void scan_yield(void)
{
might_sleep();
if (time_is_before_eq_jiffies(next_scan_yield)) {
schedule();
next_scan_yield = jiffies + jiffies_scan_yield;
}
}
It called deep inside the codepath and in a conditional way,
and that is what crapped up when one of the new scan_block()
uses grew a tasklist_lock dependency.
This minimal patch removes that yielding stuff and adds the
proper cond_resched().
The background scanning thread could probably also be reniced
to +10.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Inform kmemleak about pid_hash
kmemleak: Do not warn if an unknown object is freed
kmemleak: Do not report new leaked objects if the scanning was stopped
kmemleak: Slightly change the policy on newly allocated objects
kmemleak: Do not trigger a scan when reading the debug/kmemleak file
kmemleak: Simplify the reports logged by the scanning thread
kmemleak: Enable task stacks scanning by default
kmemleak: Allow the early log buffer to be configurable.
Nathan reported that
| commit 73d60b7f74
| Author: Yinghai Lu <yinghai@kernel.org>
| Date: Tue Jun 16 15:33:00 2009 -0700
|
| page-allocator: clear N_HIGH_MEMORY map before we set it again
|
| SRAT tables may contains nodes of very small size. The arch code may
| decide to not activate such a node. However, currently the early boot
| code sets N_HIGH_MEMORY for such nodes. These nodes therefore seem to be
| active although these nodes have no present pages.
|
| For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too
unintentionally and incorrectly clears the cpuset.mems cgroup attribute on
an i386 kvm guest, meaning that cpuset.mems can not be used.
Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only.
and need to do save/restore for that in find_zone_movable_pfn
Reported-by: Nathan Lynch <ntl@pobox.com>
Tested-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
balance_dirty_pages can overreact and move all of the dirty pages to
writeback unnecessarily.
balance_dirty_pages makes its decision to throttle based on the number of
dirty plus writeback pages that are over the calculated limit,so it will
continue to move pages even when there are plenty of pages in writeback
and less than the threshold still dirty.
This allows it to overshoot its limits and move all the dirty pages to
writeback while waiting for the drives to catch up and empty the writeback
list.
A simple fio test easily demonstrates this problem.
fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10
This is the simplest fix I could find, but I'm not entirely sure that it
alone will be enough for all cases. But it certainly is an improvement on
my desktop machine writing to 2 disks.
Do we need something more for machines with large arrays where
bdi_threshold * number_of_drives is greater than the dirty_ratio ?
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show_pools() walks the page_list of a pool w/o protection against the list
modifications in alloc/free. Take pool->lock to avoid stomping into
nirvana.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vmap'ed memory blocks are not tracked by kmemleak (yet) but they may be
released with vfree() which is tracked. The corresponding kmemleak
warning is only enabled in debug mode. Future patch will add support for
ioremap and vmap.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If the scanning was stopped with a signal, it is possible that some
objects are left with a white colour (potential leaks) and reported. Add
a check to avoid reporting such objects.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
