mirror of
https://github.com/FEX-Emu/linux.git
synced 2025-01-15 06:00:41 +00:00
10211 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
8f28472a73 |
USB patches for 4.12-rc1
Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to the Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvEIQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yny4gCePCXxnrQdMWE+IMXf1H1hMubLkVkAn0ZWgQkq BspgO7ZmGb+9Fpf6YvNz =nwAu -----END PGP SIGNATURE----- Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ... |
||
Linus Torvalds
|
2bd8040174 |
This is the bulk of GPIO changes for the v4.12 kernel cycle:
Core changes - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZCusBAAoJEEEQszewGV1zengP/i3YgmSXJdaf26t/NxG3klU3 qx3akdQ3gEQ6BOlIY7Ew+b6qgMJynYNZa1trZgqTgLxPEKWjidyCgz+LHQ0OY+ir a7x6wr+gBj5WlgV+nBjVs4l6W8pVKCfnap/04OPEQDpxZOHs2LU5pqxxUZ9AxkKS urDFMDX55baFviQ+xAuHgamok87YoGP36A/e/fHIBepZmnochf0mCcPfIh0t8lRh s2x29PN5ZFRkl403RzjZfVCEMr9bMnSqmDquvPO++Kq0bL+3rOhuMErocd1Bg8ao LxBktkryujTaw699xK7Rq5SwcnOAPpaBY4NTmwsIJvAJuCh7qLy9JxQSBsSOT2bx 61NWUt5T/Xsi0ECYZM4YvsNpUP6XrpSTyG3c8T3fY9vXYLNKZBv1ht6OODpLeuke DxULAWP+DdzUS8a3qfKQvIJzSTloU31a1MBG58DWNJ072EQfa2YNaVE75VQk/z5/ 0xZbSHdPY/0Xgx8ltpKu37bSO676JiVQZZ1HEAuti4h21+USYueYD2L8/Bx4k9e/ 4UaOcw3MaCDHP/sf5hg17kQBjhhS0lV9Zv6H9QbHZUocJTJlIU+vXtgkQlrfi3n8 8j5m+ywVarmLtPqg1j2rqcw7LBCPe0qRXH3e5X/YmNMc3rH9bQz4cTo8ZSN9r8zS c17zGbbAqlGsBkpFAbQz =DGPb -----END PGP SIGNATURE----- Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ... |
||
Linus Torvalds
|
16a12fa9ae |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov: - a big update from Mauro converting input documentation to ReST format - Synaptics PS/2 is now aware of SMBus companion devices, which means that we can now use native RMI4 protocol to handle touchpads, instead of relying on legacy PS/2 mode. - we removed support from BMA180 accelerometer from input devices as it is now handled properly by IIO - update to TSC2007 to corretcly report pressure - other miscellaneous driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits) Input: ar1021_i2c - use BIT to check for a bit Input: twl4030-pwrbutton - use input_set_capability() helper Input: twl4030-pwrbutton - use correct device for irq request Input: ar1021_i2c - enable touch mode during open Input: add uinput documentation dt-bindings: input: add bindings document for ar1021_i2c driver dt-bindings: input: rotary-encoder: fix typo Input: xen-kbdfront - add module parameter for setting resolution ARM: pxa/raumfeld: fix compile error in rotary controller resources Input: xpad - do not suggest writing to Dominic Input: xpad - don't use literal blocks inside footnotes Input: xpad - note that usb/devices is now at /sys/kernel/debug/ Input: docs - freshen up introduction Input: docs - split input docs into kernel- and user-facing Input: docs - note that MT-A protocol is obsolete Input: docs - update joystick documentation a bit Input: docs - remove disclaimer/GPL notice Input: fix "Game console" heading level in joystick documentation Input: rotary-encoder - remove references to platform data from docs Input: move documentation for Amiga CD32 ... |
||
Linus Torvalds
|
d25e436c4b |
spi: Updates for v4.12
There's quite a lot of small driver specific fixes and enhancements in this release but the main activity has been around the loopback and spidev test drivers which is good to see as it should hopefully help improve the quality of all the drivers as people start to make use of the new code: - Additional tests in the loopback test driver for vmalloc() compatibility and around delays together with fixes for existing tests. - Support for testing continuous data transfer for use in soak testing. - Device property support for board info platforms. - Support for registering empty sets of devices via board info (useful when writing code to enumerate hardware automatically). -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlkJ81ETHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0HQZB/9IO6RQmdIU8A2s0xBaXOI64uE9ajFQ aPcwtWwpsAyxSHYtDbsPrcVuLTaJm3q+ldNJt7stYTkRG7R5W6bx+oiJOx1VdkbY QJiUQUYNpAj5H0EIPocTFct8Yq+SfVtEeEwAuEnu/DouTXLPSoxoQ0dua+iyesxL ZF6T+/zyRyj+zoijHGbYQEDs6jKuZudtMzQAFoJEalr3ywEDyBMUghXbkfk1qJd4 9XD1Vr4wFUYJ/7yPdwzfhG8u8FHmIBob3L2w6MPvNB961lnaQUCxuRKy3cJZrQM8 fn3WJAzrnsA6SOTM+rskWhWh4j0t26XgY/xCsEdiE+XGIh6Sd1RPQuJM =e4MH -----END PGP SIGNATURE----- Merge tag 'spi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "There's quite a lot of small driver specific fixes and enhancements in this release but the main activity has been around the loopback and spidev test drivers which is good to see as it should hopefully help improve the quality of all the drivers as people start to make use of the new code: - Additional tests in the loopback test driver for vmalloc() compatibility and around delays together with fixes for existing tests. - Support for testing continuous data transfer for use in soak testing. - Device property support for board info platforms. - Support for registering empty sets of devices via board info (useful when writing code to enumerate hardware automatically)" * tag 'spi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits) spi: cadence: Allow for GPIO pins to be used as chipselects spi-imx: Implements handling of the SPI_READY mode flag. spi: tegra: fix spelling mistake: "trasfer" -> "transfer" spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble spi: Add can_dma like interface for spi_flash_read spi: dw: Disable clock after unregistering the host spi: double time out tolerance spi: atmel: add deepest PM support to SAMA5D2 spi: atmel: factorize reusable code for SPI controller init spi: orion: add LSB support spi: pl022: don't use uninitialized variable spi: loopback-test: fix spelling mistake: "minimam" -> "minimum" spi: dynamycally allocated message initialization spi: spi-ti-qspi: Remove unused dma_dev variable spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer spi: spi-ti-qspi: Use dma_engine wrapper for dma memcpy call spi: spidev_test: add option to continuously transfer data spi: loopback-test: fix potential integer overflow on multiple spi: sun6i: update max transfer size reported spi: pl022: Document property values ... |
||
Linus Torvalds
|
a90f0e9ebb |
regulator: Updates for v4.12
Quite a lot going on with the regulator API for this release, much more in the core than in the drivers for a change: - Fixes for voltage change propagation through dumb power switches. - A notification when regulators are enabled. - A new settling time property for regulators where the time taken to move to a new voltage is not related to the size of the change. - Some reorganization of the Arizona drivers in preparation for sharing the code with the next generation devices they've been integrated with. - Support for newer Freescale chips in the Anatop regulator. - A new driver for voltage controlled regulators to cope with some exciting ChromeOS hardware designs. - Support for Rohm BD9571MWV-M and TI TPS65132. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlkJ72cTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0KfMB/9zutY/L8UyJ40ZOIn4mgfUiWuzTrMP lFWlHyRtt0gz6pHlZtaslDUMpp95R/BchE3fNfvmi1VHAAL8yt+edlMniPmVLG+M 09CSr27n0Vk8uk8DIpZNzzPc/Rxp0tfa59/+e01yV69s3x/j0yoFXGxHPbco2zT/ EVSYgQf5yXgAu4qG/htLm0AEQyHvfnMiGvd2Z3xU+kE1BOv617ATmYBdvkZLOKDO f7QqVK/POkVmDDh3p+qOUYa1+su6icpe3O2bYeWc/x50gxXx+ouxdtmqLSpPoWZz ox+1S1Mv32UC5q9NMF2lz1o0SK8VNLVVTQHr9x57IbXCyIBl84e+6JES =6YOx -----END PGP SIGNATURE----- Merge tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a lot going on with the regulator API for this release, much more in the core than in the drivers for a change: - Fixes for voltage change propagation through dumb power switches. - A notification when regulators are enabled. - A new settling time property for regulators where the time taken to move to a new voltage is not related to the size of the change. - Some reorganization of the Arizona drivers in preparation for sharing the code with the next generation devices they've been integrated with. - Support for newer Freescale chips in the Anatop regulator. - A new driver for voltage controlled regulators to cope with some exciting ChromeOS hardware designs. - Support for Rohm BD9571MWV-M and TI TPS65132" * tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (51 commits) regulator: Add ROHM BD9571MWV-M PMIC regulator driver regulator: arizona-ldo1: Factor out generic initialization regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona regulator: arizona-ldo1: Move pdata into a separate structure regulator: arizona-micsupp: Factor out generic initialization regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona regulator: arizona-micsupp: Move pdata into a separate structure regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators regulator: anatop: make regulator name property required regulator: tps65023: Fix inverted core enable logic. regulator: anatop: make sure regulator name is properly defined regulator: core: Allow dummy regulators for supplies regulator: core: Only propagate voltage changes to if it can change voltages regulator: vctrl: Fix out of bounds array access for vctrl->vtable regulator: tps65132: fix platform_no_drv_owner.cocci warnings regulator: tps65132: Fix off-by-one for .max_register setting regulator: anatop: set default voltage selector for pcie regulator: tps65132: add device-tree binding regulator: tps65132: add regulator driver for TI TPS65132 regulator: anatop: remove unneeded name field of struct anatop_regulator ... |
||
Linus Torvalds
|
14b730723a |
Merge branch 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wilfram Sang: "I2C has the following updates for you: - an immutable cross-subsystem branch fixing PMIC access on Intel Baytrail - bigger driver updates to the designware, meson, exynos5 drivers - new i2c_acpi_new_device() function to create devices from ACPI - struct i2c_driver has now a flag 'disable_i2c_core_irq_mapping' to allow custom IRQ mapping in case the default does not fit - mux subsystem centralized error messages in its core - new driver for ltc4306 i2c mux - usual set of small updates" * 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits) i2c: thunderx: Enable HWMON class probing i2c: rcar: clarify PM handling with more comments i2c: rcar: fix resume by always initializing registers before transfer i2c: tegra: fix spelling mistake: "contoller" -> "controller" i2c: exynos5: use core helper to get driver data i2c: exynos5: de-duplicate error logs on clock setup i2c: exynos5: simplify clock frequency handling i2c: exynos5: simplify timings calculation i2c: designware-baytrail: fix potential null pointer dereference on dev i2c: designware: Get selected speed mode sda-hold-time via ACPI [media] cx231xx: stop double error reporting i2c: core: Allow drivers to disable i2c-core irq mapping i2c: core: Add new i2c_acpi_new_device helper function i2c: core: Allow getting ACPI info by index i2c: img-scb: use setup_timer i2c: i2c-scmi: add a MS HID i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch dt-bindings: i2c: mux: ltc4306: Add dt-bindings for I2C multiplexer/switch i2c: mux: reg: stop double error reporting i2c: mux: pinctrl: stop double error reporting ... |
||
Linus Torvalds
|
d26f552ebb |
- New Drivers
- Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) - New Device Support - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich - New Functionality - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic - Fix-ups - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core - Bug Fixes - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZAdDwAAoJEFGvii+H/HdhViMQAJ7Of3xKiS/P1d7RiOhs2OMY 41R4GojoY2QSurndIbV/PBUbNMlJiqvIawbFCBz7rAZnIv6NatFQGCQnATci8iDV tFxz2m705ifstSQTWUr2ykRdNUdKkShLPHdbjs0ZbpV6Xa5tIXT0U7WpdDr+J51B 422JHx8tVFrktkYCjg7VASKU9hzz8iRSbdpfu6ZitTT3yrr5Ivl0gaCCmXVyWTsF fy8DFvEpsAS1pToXGGeZHueTDIgePyEjwT+By6TuDvkObxvCbVrdhKrJnORfHRKx +aidbb4E8/ZNYmRERwl4VkAR7y2tenQat/Si+4rtwYHNTcapjjpdEElQTKkIAUpy L5Y9Ai0/ihDXpCPmMnf7omnt3qxAltE4voUk2WUIxDOiaFl6XwyxFPDoy5l8T2IM i1akRFss/lov9r3dWzxApTdMNwEdeXnHbZgW60h6RHyCH3dqfN3dFcfu9IX/ua01 HHI4ltkmaokXJmwvpa+/oVxGAfcoS5AGRw1uRfIN1fbjIxEeRS4I8iogqneVQ5GJ D766JIhuf1KKBIWu5DYwfCyTgSdBnEt/J/vTIe4zOZrBk/StbeygWfhUMRSutglK eORpwzsX8DnS4SYRErCcRRlePB/NU2GvmHOXSApSem9ifHx8sQGM7QZt2am5JYRp q/6gViepBHxrA8Xv6mWJ =SHiw -----END PGP SIGNATURE----- Merge tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) New Device Support: - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich New Functionality: - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic Fix-ups: - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core Bug Fixes: - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts" * tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) input: touchscreen: mxs-lradc: || vs && typos dt-bindings: Add AXP803's regulator info mfd: axp20x: Support AXP803 variant dt-bindings: Add device tree binding for X-Powers AXP803 PMIC dt-bindings: Make AXP20X compatible strings one per line mfd: intel_soc_pmic_core: Fix unchecked return value mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable() mfd: omap-usb-tll: Configure ULPIAUTOIDLE mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode mfd: palmas: Fixed spelling mistake in error message mfd: lpc_ich: Add support for Intel Gemini Lake SoC mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth mfd: intel_soc_pmic: Fix a mess with compilation units mfd: exynos-lpass: Add runtime PM support mfd: exynos-lpass: Add missing remove() function mfd: exynos-lpass: Add support for clocks mfd: exynos-lpass: Remove pad retention control iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs mfd: cpcap: Fix bad use of IRQ sense register mfd: cpcap: Use ack_invert interrupts ... |
||
Linus Torvalds
|
e897f267c5 |
- New Drivers
- Arctic Sand ARC2C0608 LED Backlight -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZAdHKAAoJEFGvii+H/HdhooAP/3CTa+8+94T97DU/o4crK5w1 W9tMDDdmes0qM4SR37PJDM2HGDt9sprAPvhdhgpPUnm+MR0RYhj4dxxmX7D3sV+y GNM0E4hofYfdWiNeSLOPA3c5PT+UaRCjei8wMrFMNYf0JouGFqOSQnhBy6K+W4hs k1onp9hm8FoxiZqxaaITIt2Q/nllWPkUyitU5MfzB5DPKkDQygtAUWRFgh+ItLJf Hf7Qy30E8EASoncgH28glh7JCVyXpd7/ldUBM/zslw3V1oBdZ3TX3XDyg9NootA7 szfQ0kM7tgXZXgu6klZVxezIUm/T7dnWyL2ScMyANj6l2jgNZ/uwzYYmGauHAcFl zWkit6+9D9ZKXMnrxq3cP2rJ6NryJOa+0yGl0mJ7EWfIB/4cXbt6JRVcF3rFfBzg EndvUTJsIwlDIgoj+IREF6FD4oyLRC7YE3HAa65Hn7rxilxej3Q8uPJ8n0AzxbBK 8sbypPCU40kJg9N5gSPIdUHEIynYicO/K/4invnF8nQc4915Nr0pnUsrI5xiwHez 9qRVaTpaTuf5mARRjBaX0qDRz2ssccOET4hpFiXumSWhKjanOqQ3k9o2QE6qTbor FIt7Ik6jabXzqC+ZuEalxhjvRCHC8FguCWCCanwFeMe6dB0COY2hzidukUPQuTgd LgcqrMKt1Kj674e7DenB =qfK6 -----END PGP SIGNATURE----- Merge tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight update from Lee Jones: "New Arctic Sand ARC2C0608 LED Backlight driver" * tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: Add support for Arctic Sand LED backlight driver chips dt-bindings: backlight: arcxcnn: Supply bindings for Arctic Sand backlight |
||
Linus Torvalds
|
221656e7c4 |
sound updates for 4.12-rc1
It was a relatively calm development cycle, and no scaring changes are seen in both core and driver sides. Here are some highlights: ASoC: - A new API for hooking up jacks more generically and easily - Card longname is set based on DMI for a unique UCM profile - Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213 HD-audio: - Many new quirks to support headset for various devices (mostly ASUS ones) as usual - Support for dual codecs on some Gigabyte mobos and Lenovo laptop - Improvement on PCM position reporting for Skylake and newer FireWire: - New drivers for MOTU and RME Fireface series - Updates for Digidesign Digi00x and TASCAM series - Support for tracepoints Others: - USB-audio: improved support for quirk_alias option - Cleanups, constification allover the places -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlkIphEOHHRpd2FpQHN1 c2UuZGUACgkQbDGAVD0pKaQwjg//axvFHHVIJGkwL628pfWSVJN7+gTlKkeBPBcn NtaOOC7aM5IhkvYGxrq5e55cRFDMt4tvVloGLXu593gzDoN0JYUSCVYcctqklKa8 nbHeasZgnVwmQHf/44oajiT++UElxH/i4q/kz91ZuYmNVUgh6syH3o04T9UBZA6k rxv4MbMctUf1SYwbZVMzPLWXsSCwmaWsUimhi9WiDRzSE1bGI46nJtPbDF5jXhlR 83Dsp1lp5tQXXAeYksjx+yUtQMRpY85zsQj1NJ/izrD1fjWnXquaRlDZwcIOWCio 3Vz87liQyIEldY7FHL64igo8SIMeypPhRUFfxugSn9iTqeuWaXFyJNQwo0aENDZH RMUmqAutiik2MEXMN0fAAgj3GcxbSVgYK/EfmzHNlrDAtdbgBm+ArIhS67Ue9vPi emb6+/STUI7rmH8+RFBvQ/Xz3mpa791z+jVuidTKoEgYJ5/M1Ql8Ucoja74UXj4m QjNe+CBO6GXcAOlBNeMZ7PMpQrR14Hl386fusLG2JXRLR8p0SmO4Klt8PrBy/Obh 4bE0/EWK/e5XbXVX+8QyDOtt9cFsAYZJqbpDr9Enft3LJcid6gmiJZGuZ1i+Iv1d L2lYkFQkLI/bjf5xGsamK2pB9xQzOSa7u6Q+q4iBXuVYjDpoKz59l6siwRuuJLMX c+QfQgY= =8RhW -----END PGP SIGNATURE----- Merge tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It was a relatively calm development cycle, and no scaring changes are seen in both core and driver sides. Here are some highlights: ASoC: - A new API for hooking up jacks more generically and easily - Card longname is set based on DMI for a unique UCM profile - Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213 HD-audio: - Many new quirks to support headset for various devices (mostly ASUS ones) as usual - Support for dual codecs on some Gigabyte mobos and Lenovo laptop - Improvement on PCM position reporting for Skylake and newer FireWire: - New drivers for MOTU and RME Fireface series - Updates for Digidesign Digi00x and TASCAM series - Support for tracepoints Others: - USB-audio: improved support for quirk_alias option - Cleanups, constification allover the places" * tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits) ASoC: codec: wm8960: Relax bit clock computation when using PLL ASoC: codec: wm9860: avoid maybe-uninitialized warning ASoC: nau8824: leave Class D gain at chip default ASoC: nau8824: rename controls to match DAPM controls ASoC: Intel: Skylake: Return negative error code ASoC: Intel: Skylake: Fix unused variable warning ASoC: Intel: Skylake: fix uninitialized pointer use ASoC: sti: Fix error handling if of_clk_get() fails ASoC: cs4271: configure reset GPIO as output ASoC: dwc: Disallow building designware_pcm as a module ALSA: ali5451: fix spelling mistake in "ali_capture_preapre" ASoC: stm32: add SAI driver ASoC: stm32: add bindings for SAI ASoC: Intel: Skylake: Add loadable module support on KBL platform ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version ASoC: Intel: Skylake: Register dsp_fw_ops for kabylake ASoC: Intel: Skylake: Modify arguments to reuse module transfer function ASoC: Intel: Skylake: Commonize library load ASoC: Intel: Skylake: Move sst common initialization to a helper function ASoC: nau8824: new driver ... |
||
Linus Torvalds
|
2f34c1231b |
main drm pull request for 4.12 kernel
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZCTzvAAoJEAx081l5xIa+9kcQAJsQiija4/7QGx6IzakOMqjx WulJ3zYG/cU/HLwCBcuWRDF6wAj+7iWNeLCPmolHwEazcI8tQVdgMlWtbdMbDh8U ckzD3FBXsEVfIfab+u6tyoUkm3l/VDhMXbjkUK7NTo/+dkRqe5LuFfZPCGN09jft Y+5salkRXzDhXPSFsqmjfzhx1v7PTgf0a5HUenKWEWOv+sJQaW4/iPvcDSIcg5qR l9WjAqro1NpFYhUodnh6DkLeledL1U5whdtp/yvrUAck8y+WP/jwGYmQ7pZ0UkQm f0M3kV6K67ox9eqN++jsGX5o8sB1qF01Uh95kBAnyzYzsw4ZlMCx6pV7PDX+J88M UBNMEqX10hrLkNJA9lGjPWx+/6fudcwg9anKvTRO3Uyx7MbYoJAgjzAM+yBqqtV0 8Otxa4Bw0V2pmUD+0lqJDERRvE77VCXkLb8SaI5lQo0MHpQqT2cZA+GD+B+rZHO6 Ie5LDFY87vM2GG1IECufG+xOa3v6sn2FfQ1ouu1KNGKOAMBKcQCQyQx3kGVuNW2i HDACVXALJgXdRlVLm4jydOCZdRoguX7AWmRjtdwxgaO+lBcGfLhkXdjLQ7Ho+29p 32ArJfkZPfA53vMB6lHxAfbtrs1q2RzyVnPHj/KqeJnGZbABKTsF2HQ5BQc4Xq/J mqXoz6Oubdvk4Pwyx7Ne =UxFF -----END PGP SIGNATURE----- Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux Pull drm u pdates from Dave Airlie: "This is the main drm pull request for v4.12. Apart from two fixes pulls, everything should have been in drm-next for at least 2 weeks. The biggest thing in here is AMD released the public headers for their upcoming VEGA GPUs. These as always are quite a sizeable chunk of header files. They've also added initial non-display support for those GPUs, though they aren't available in production yet. Otherwise it's pretty much normal. New bridge drivers: - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++ - generic LVDS bridge support. Core: - Displayport link train failure reporting to userspace - debugfs interface cleaned up - subsystem TODO in kerneldoc now - Extended fbdev support (flipping and vblank wait) - drm_platform removed - EDP CRC support in helper - HF-VSDB SCDC support in EDID parser - Lots of code cleanups and header extraction - Thunderbolt external GPU awareness - Atomic helper improvements - Documentation improvements panel: - Sitronix and Samsung new panel support amdgpu: - Preliminary vega10 support - Multi-level page table support - GPU sensor support for userspace - PRT support for sparse buffers - SR-IOV improvements - Non-contig VRAM CPU mapping i915: - Atomic modesetting enabled by default on Gen5+ - LSPCON improvements - Atomic state handling for cdclk - GPU reset improvements - In-kernel unit tests - Geminilake improvements and color manager support - Designware i2c fixes - vblank evasion improvements - Hotplug safe connector iterators - GVT scheduler QoS support - GVT Kabylake support nouveau: - Acceleration support for Pascal (GP10x). - Rearchitecture of code handling proprietary signed firmware - Fix GTX 970 with odd MMU configuration - GP10B support - GP107 acceleration support vmwgfx: - Atomic modesetting support for vmwgfx omapdrm: - Support for render nodes - Refactor omapdss code - Fix some probe ordering issues - Fix too dark RGB565 rendering sunxi: - prelim rework for multiple pipes. mali-dp: - Color management support - Plane scaling - Power management improvements imx-drm: - Prefetch Resolve Engine/Gasket on i.MX6QP - Deferred plane disabling - Separate alpha support mediatek: - Mediatek SoC MT2701 support rcar-du: - Gen3 HDMI support msm: - 4k support for newer chips - OPP bindings for gpu - prep work for per-process pagetables vc4: - HDMI audio support - fixes qxl: - minor fixes. dw-hdmi: - PHY improvements - CSC fixes - Amlogic GX SoC support" * tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits) drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr() drm/nouveau/kms: Increase max retries in scanout position queries. drm/nouveau/bios/bitP: check that table is long enough for optional pointers drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine drm: mali-dp: use div_u64 for expensive 64-bit divisions drm/i915: Confirm the request is still active before adding it to the await drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio drm/i915/selftests: Allocate inode/file dynamically drm/i915: Fix system hang with EI UP masked on Haswell drm/i915: checking for NULL instead of IS_ERR() in mock selftests drm/i915: Perform link quality check unconditionally during long pulse drm/i915: Fix use after free in lpe_audio_platdev_destroy() drm/i915: Use the right mapping_gfp_mask for final shmem allocation drm/i915: Make legacy cursor updates more unsynced drm/i915: Apply a cond_resched() to the saturated signaler drm/i915: Park the signaler before sleeping drm: mali-dp: Check the mclk rate and allow up/down scaling drm: mali-dp: Enable image enhancement when scaling drm: mali-dp: Add plane upscaling support ... |
||
Linus Torvalds
|
7af4c727c7 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID subsystem updates from Jiri Kosina: - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been growing dramatically during past years, so the time has come to switch over the default, and perform the pro-active reading only in cases where it's really needed (multitouch, wacom). The only place where this behavior is (in some form) preserved is hiddev so that we don't introduce userspace-visible change of behavior. From Benjamin Tissoires - HID++ support for power_supply / baterry reporting. From Benjamin Tissoires and Bastien Nocera - Vast improvements / rework of DS3 and DS4 in Sony driver. From Roderick Colenbrander - Improvment (in terms of getting closer to the Microsoft's interpretation of slightly ambiguous specification) of logical range interpretation in case null-state is set in the rdesc. From Valtteri Heikkilä and Tomasz Kramkowski - A lot of newly supported device IDs and small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits) HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch HID: asus: support backlight on USB keyboards HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq HID: wacom: generic: sync pad events only for actual packets HID: sony: remove redundant check for -ve err HID: sony: Make sure to unregister sensors on failure HID: sony: Make DS4 bt poll interval adjustable HID: sony: Set proper bit flags on DS4 output report HID: sony: DS4 use brighter LED colors HID: sony: Improve navigation controller axis/button mapping HID: sony: Use DS3 MAC address as unique identifier on USB HID: logitech-hidpp: add a sysfs file to tell we support power_supply HID: logitech-hidpp: enable HID++ 1.0 battery reporting HID: logitech-hidpp: add support for battery status for the K750 HID: logitech-hidpp: battery: provide CAPACITY_LEVEL HID: logitech-hidpp: rename battery level into capacity HID: logitech-hidpp: battery: provide ONLINE property HID: logitech-hidpp: notify battery on connect HID: logitech-hidpp: return an error if the queried feature is not present HID: logitech-hidpp: create the battery for all types of HID++ devices ... |
||
Linus Torvalds
|
68fed41e0f |
This is the bulk of pin control changes for the v4.12 cycle:
Core changes: - Add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - A whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - Switch meson driver to get the GPIO ranges from the device tree. - Input schmitt trigger support on the Rockchip driver. - Enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - Name the Qualcomm QDF2xxx GPIO lines. - Support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - Pad retention support for the Samsung Exynos 5433. - Handle suspend-to-ram in the AT91-pio4 driver. - Pin configuration support in the Aspeed driver. Cleanups: - The final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZCG0aAAoJEEEQszewGV1zBpcP/37y0m2ZFIqVJrqlPKVeZbRa aYwsbY3l9OGeocLXSRWaqLJkwJ+WaG8ascoXHLMgk4jFC2CutwUea0fzhy9Li2VO Sqd/BN9iNd/g2lTf8o37NM5qYF5IvStZu12DzFPRFpec6pEiYOHVmRiSlIK5lREG v/NGNAIzLPH59jRHA17sLT1lkHmiT43S4Gm38nvpar8vfO+2UkAwGVPQPC8dGuL9 gydMLLtx3d1SzWqicbMSICa/F7kjWz5I4jL6KM7ohVGXgDn8tdZk+7rERfBD9qoR eDNPZvXajaC6y3S3h6Ynv094X30w3VA0xtj9kPVhJsS1yUlVli5GlC3WHPArwrRQ sXx29UsdTmAjzHHns4OZfxKnEVvHbXtW1XmX+ks248f/k8hCVWpQA9ZENvVHjLvu NkDwXOmTWOxjutDveZqm7RM6z+99+lRgzLgwB3GMENIUC8ohH79W/R9GYHvrqOZI hWX+G/q3nnnW3cIPc15rN2MC3fkjE2mdFC0N+/kDlKtzPabCS8U6JZsfQDulX5m1 I2xF2DY+1WWCy1mMDpyTdYNDlkOGU8j/N5MXx9z1629m+vjg0KZo35+mGwJh5mA1 gQ6rI3DdhS5qVK2Gj/joYkwQ1cKpdEtljlpI9A+WdXx1eO7RKVK1m1fxbd8c47L/ I0qdXsL66ZtiKDOIDPau =BCaA -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.12 cycle. The extra week before the merge window actually resulted in some of the type of fixes that usually arrive after the merge window already starting to trickle in from eager developers using -next, I'm impressed. I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal with the onset of Samsung patches. It works great. Apart from that it is a boring round, just incremental updates and fixes all over the place, no serious core changes or anything exciting like that. The most pleasing to see is Julia Cartwrights work to audit the irqchip-providing drivers for realtime locking compliance. It's one of those "I should really get around to looking into that" things that have been on my TODO list since forever. Summary: Core changes: - add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - a whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - switch meson driver to get the GPIO ranges from the device tree. - input schmitt trigger support on the Rockchip driver. - enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - name the Qualcomm QDF2xxx GPIO lines. - support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - pad retention support for the Samsung Exynos 5433. - handle suspend-to-ram in the AT91-pio4 driver. - pin configuration support in the Aspeed driver. Cleanups: - the final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent" * tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: artpec6: Fix return value check in artpec6_pmx_probe() pinctrl: artpec6: Remove .owner field for driver pinctrl: tegra: xusb: Silence sparse warnings ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller" pinctrl: make artpec6 explicitly non-modular pinctrl: aspeed: g5: Add pinconf support pinctrl: aspeed: g4: Add pinconf support pinctrl: aspeed: Add core pinconf support pinctrl: aspeed: Document pinconf in devicetree bindings pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl pinctrl: stm32: Add STM32F469 MCU support Documentation: dt: Remove ngpios from stm32-pinctrl binding pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: add possibility to use gpio-ranges to declare bank range pinctrl: armada-37xx: Add gpio support pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers pinctrl: core: Make pinctrl_init_controller() static pinctrl: generic: Add bi-directional and output-enable ... |
||
Linus Torvalds
|
be580e7522 |
MMC core:
- Continue to re-factor code to prepare for eMMC CMDQ and blkmq support - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support - Add helper functions to manage temporary enable/disable of eMMC CMDQ - Improve wait-busy detection for SDIO MMC host: - cavium: Add driver to support Cavium controllers - cavium: Extend Cavium driver to support Octeon SOCs and ThunderX SOCs - bcm2835: Add new driver for Broadcom BCM2835 controller - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller - sdhci-tegra: Add support for the Tegra186 variant - sdhci-of-esdhc: Support for UHS-I SD cards - sdhci-of-esdhc: Support for eMMC HS200 cards - sdhci-cadence: Add eMMC HS400 enhanced strobe support - sdhci-esdhc-imx: Reset tuning circuit when needed - sdhci-pci: Modernize and clean-up some PM related code - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers - sdhci: Re-factoring and modernizations - sdhci: Optimize delay loops - sdhci: Improve register dump print format - sdhci: Add support for the Command Queue Engine - meson-gx: Various improvements and clean-ups - meson-gx: Add support for CMD23 - meson-gx: Basic tuning support to avoid CRC errors - s3cmci: Enable probing via DT - mediatek: Improve tuning support for eMMC HS200 and HS400 mode - tmio: Improve DMA support - tmio: Use correct response for CMD12 - dw_mmc: Minor improvements and clean-ups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZCF8JAAoJEP4mhCVzWIwpjikP/iLwYZOP+aNl1wvHXJ7/UtOB bonqPPRLfW6mJkiphZyjnf3ZldS8DoUYp1Jh8gVsWoOPZhFuzAyFTGRJA5t0sEtH WzV0X72qzfDESekP1KGZZPQSfqfo/UnIEwa7U0Rlw8jlpvVsbXimqw54e+hCE0n8 bhZjQihxOkXofCMnS4CxFJwbSCNEkdw6cMgNk72P8KAQllbOA3UbOurAbRUT0I6S 3H3+8uKh0fZp3BYGV5y8DxzqIRaCz3ed8TTuGFc3YU8sNGEF67AwcbBzfDaegNsR qNPU12gccOU5IY8gbG/MMoEpSXodEj0RCW2uDqt+QT289eh3SpPLlS2en/iZj4t6 F1xnMEg48GpYJbiB4YImfK49c3RQXAtcdwf/v8SUcE4FUktuOsyQIozMglYIsUd1 fGZ3yr0caRBnwAkbj5GXaG3/VXzMExKYalf990kUuxhHHGuRQLLg0SHkfWNhJNA1 mw0XHXTrC9GO32PPfylgkdGOOCnlP36sbBPhGQqJUH6yeiy1wO4xoCVSO8iVI5J9 8W9BGgSYJRlPaItmH2syQEO9dSRMS5BLy7oICTBn+LsszXwMbuNn6cFBkhF1Xxwy 2MHU+b6EMn4V4qrp0c8gVfMraXkL9H7BwL9aCv1UTuti7d/7NM7G1wNW9qGala3Y 9cU8nzC1A521kfmDNPPO =p+Hb -----END PGP SIGNATURE----- Merge tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support - Add helper functions to manage temporary enable/disable of eMMC CMDQ - Improve wait-busy detection for SDIO MMC host: - cavium: Add driver to support Cavium controllers - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs - bcm2835: Add new driver for Broadcom BCM2835 controller - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller - sdhci-tegra: Add support for the Tegra186 variant - sdhci-of-esdhc: Support for UHS-I SD cards - sdhci-of-esdhc: Support for eMMC HS200 cards - sdhci-cadence: Add eMMC HS400 enhanced strobe support - sdhci-esdhc-imx: Reset tuning circuit when needed - sdhci-pci: Modernize and clean-up some PM related code - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers - sdhci: Re-factoring and modernizations - sdhci: Optimize delay loops - sdhci: Improve register dump print format - sdhci: Add support for the Command Queue Engine - meson-gx: Various improvements and clean-ups - meson-gx: Add support for CMD23 - meson-gx: Basic tuning support to avoid CRC errors - s3cmci: Enable probing via DT - mediatek: Improve tuning support for eMMC HS200 and HS400 mode - tmio: Improve DMA support - tmio: Use correct response for CMD12 - dw_mmc: Minor improvements and clean-ups" * tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits) mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY mmc: sdhci-xenon: Fix the work flow in xenon_remove(). MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data() mmc: cavium: Use module_pci_driver to simplify the code mmc: cavium: Add MMC support for Octeon SOCs. mmc: cavium: Fix detection of block or byte addressing. mmc: core: Export API to allow hosts to get the card address mmc: sdio: Fix sdio wait busy implement limitation mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card clk: apn806: fix spelling mistake: "mising" -> "missing" mmc: sdhci-of-esdhc: add delay between tuning cycles mmc: sdhci: Control the delay between tuning commands mmc: sdhci-of-esdhc: add tuning support mmc: sdhci-of-esdhc: add support for signal voltage switch mmc: sdhci-of-esdhc: add peripheral clock support mmc: sdhci-pci: Allow for 3 bytes from Intel DSM mmc: cavium: Fix a shift wrapping bug ... |
||
Linus Torvalds
|
8d65b08deb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ... |
||
Linus Torvalds
|
5a0387a8a8 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.12: API: - Add batch registration for acomp/scomp - Change acomp testing to non-unique compressed result - Extend algorithm name limit to 128 bytes - Require setkey before accept(2) in algif_aead Algorithms: - Add support for deflate rfc1950 (zlib) Drivers: - Add accelerated crct10dif for powerpc - Add crc32 in stm32 - Add sha384/sha512 in ccp - Add 3des/gcm(aes) for v5 devices in ccp - Add Queue Interface (QI) backend support in caam - Add new Exynos RNG driver - Add ThunderX ZIP driver - Add driver for hardware random generator on MT7623 SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits) crypto: stm32 - Fix OF module alias information crypto: algif_aead - Require setkey before accept(2) crypto: scomp - add support for deflate rfc1950 (zlib) crypto: scomp - allow registration of multiple scomps crypto: ccp - Change ISR handler method for a v5 CCP crypto: ccp - Change ISR handler method for a v3 CCP crypto: crypto4xx - rename ce_ring_contol to ce_ring_control crypto: testmgr - Allow ecb(cipher_null) in FIPS mode Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT" crypto: ccp - Disable interrupts early on unload crypto: ccp - Use only the relevant interrupt bits hwrng: mtk - Add driver for hardware random generator on MT7623 SoC dt-bindings: hwrng: Add Mediatek hardware random generator bindings crypto: crct10dif-vpmsum - Fix missing preempt_disable() crypto: testmgr - replace compression known answer test crypto: acomp - allow registration of multiple acomps hwrng: n2 - Use devm_kcalloc() in n2rng_probe() crypto: chcr - Fix error handling related to 'chcr_alloc_shash' padata: get_next is never NULL crypto: exynos - Add new Exynos RNG driver ... |
||
Jiri Kosina
|
4d6ca227c7 | Merge branch 'for-4.12/asus' into for-linus | ||
Linus Torvalds
|
174ddfd5df |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: "The timer departement delivers: - more year 2038 rework - a massive rework of the arm achitected timer - preparatory patches to allow NTP correction of clock event devices to avoid early expiry - the usual pile of fixes and enhancements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) timer/sysclt: Restrict timer migration sysctl values to 0 and 1 arm64/arch_timer: Mark errata handlers as __maybe_unused Clocksource/mips-gic: Remove redundant non devicetree init MIPS/Malta: Probe gic-timer via devicetree clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver clocksource: arm_arch_timer: add GTDT support for memory-mapped timer acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource: arm_arch_timer: simplify ACPI support code. acpi/arm64: Add GTDT table parse driver clocksource: arm_arch_timer: split MMIO timer probing. clocksource: arm_arch_timer: add structs to describe MMIO timer clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call clocksource: arm_arch_timer: refactor arch_timer_needs_probing clocksource: arm_arch_timer: split dt-only rate handling x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks um/time: Set ->min_delta_ticks and ->max_delta_ticks tile/time: Set ->min_delta_ticks and ->max_delta_ticks score/time: Set ->min_delta_ticks and ->max_delta_ticks ... |
||
Linus Torvalds
|
3cb6653552 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner: "Nothing exciting from the irq side for this merge window: - a new driver for a Mediatek SoC - ACPI support for ARM GICV3 - support for shared nested interrupts - the usual pile of fixes and updates all over te place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) irqchip/mbigen: Fix return value check in mbigen_device_probe() irqchip/mips-gic: Replace static map with dynamic irqchip/mips-gic: Remove device IRQ domain irqchip/mips-gic: Separate IPI reservation & usage tracking genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs genirq: Use cpumask_available() for check of cpumask variable cpumask: Add helper cpumask_available() irqchip/irq-imx-gpcv2: Clear OF_POPULATED flag irqchip/atmel-aic5: Handle suspend to RAM irqchip: Add Mediatek mtk-cirq driver dt-bindings: mtk-cirq: Add binding document irqchip/gic-v3-its: Add IORT hook for platform MSI support irqchip/mbigen: Add ACPI support irqchip/mbigen: Introduce mbigen_of_create_domain() irqchip/mbigen: Drop module owner platform-msi: Make platform_msi_create_device_domain() ACPI aware irqchip/gicv3-its: platform-msi: Scan MADT to create platform msi domain irqchip/gicv3-its: platform-msi: Refactor its_pmsi_init() to prepare for ACPI irqchip/gicv3-its: platform-msi: Refactor its_pmsi_prepare() irqchip/gic-v3-its: Keep the include header files in alphabetic order ... |
||
Linus Torvalds
|
0e285e9088 |
Power management updates for v4.12-rc1
- Rework the intel_pstate driver's sysfs interface to make it more straightforward and more intuitive (Rafael Wysocki). - Make intel_pstate support all processors which advertise HWP (hardware-managed P-states) to the kernel in all operation modes and make it use the load-based P-state selection algorithm on a wider range of systems in the active mode (Rafael Wysocki). - Add cpufreq driver for Tegra186 (Mikko Perttunen). - Add support for Gemini Lake SoCs to intel_pstate (David Box). - Add support for MT8176 and MT817x to the Mediatek cpufreq driver and clean up that driver a bit (Daniel Kurtz). - Clean up intel_pstate and optimize it slightly (Rafael Wysocki). - Update the schedutil cpufreq governor, mostly to fix a couple of issues with it related to specific workloads, and rework its sysfs tunable and initialization a bit (Rafael Wysocki, Viresh Kumar). - Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers (Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar, YuanTian Tang). - Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert Uytterhoeven). - Add support for "always on" power domains to the genpd (generic power domains) framework and clean up that code somewhat (Ulf Hansson, Lina Iyer, Viresh Kumar). - Fix minor issues in the powernv cpuidle driver and clean it up (Anton Blanchard, Gautham Shenoy). - Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add an analogous boot-profiling utility called AnalyzeBoot to it (Todd Brandt). - Add rk3328 support to the rockchip-io AVS (Adaptive Voltage Scaling) driver (David Wu). - Fix minor issues in the cpuidle core, the intel_pstate_tracer utility, the devfreq framework and the PM core documentation (Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJZB5gGAAoJEILEb/54YlRx+78QAJRu+xAA9KtW2+loNyV8iBOB EFmQLrvz9jCDyYWsHE5huA1k6EVu5QE74HBfgDn4od9s1VqU1zWdEjqKYiaMwlCt EHxYCZ4YKeF31O3P3CtearBz9IXrckRx/XZ3F1jRsGGWooWv7o3U6PPN9iREmCzi 9dB2j0UD4lCwrnpsDMrJ0GqLu4agn9pcIKDtu4VfszVwYtza0vOQvvlgg1fQS1jX BnNfaxN0lmpSlxDjtWfM//hfLzEWK8NlHiKWJFPnWFxJIAX1QL2QKnznF/Tqi5N5 el9tQXCTRujlD7BLyl6FdsaowbiUUEcMqeh2k01Vz20WSmNDHIpfrV9MtzJ7biUK /DopyShUrpgJclKNF7BARJAJc19+PMkv3HMnOnsnhOsBNBpJjsL6FZPA95MMjI0o xmRQkixl31NWIMk60EIC6PaMLsxjhAWjiYi5D93bzkhnJTnQswvNb4ROPG+X2FCU 6YgBogsYKkqp93TTJ49OFXIvu3o7NwOyEQQW8mnNY8ffaFdWuGzOX4HkOoKHCMTD rT0qT/2q+7LPK87YwTPIVtpGVltnCr/SVI/FtAGXPysyghu2Z+4GGP4eh2+pSAUj 7Dqxdw3q7zs8ou6LOThTyNJrR+N/w1JPloprBleJR3TNcJjOy/SBjfp7yL0uopIK j5exr76ImVq7zzjyrYoa =6M3e -----END PGP SIGNATURE----- Merge tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This time the majority of changes go to the cpufreq subsystem (and to the intel_pstate driver in particular) and there are some updates in the generic power domains framework, cpuidle, tools and a couple of other places. One thing worth mentioning is that the intel_pstate's sysfs interface has been reworked to be more consistent with the general expectations of the cpufreq core and less confusing, hopefully for the better. Also, we have a new cpufreq driver for Tegra186 and new hardware support in intel_pstata and the Mediatek cpufreq driver. Apart from that, the AnalyzeSuspend utility for system suspend profiling gets a companion called AnalyzeBoot for the analogous profiling of system boot and they both go into one place under tools/power/pm-graph/. The rest is mostly fixes, cleanups and code reorganization. Specifics: - Rework the intel_pstate driver's sysfs interface to make it more straightforward and more intuitive (Rafael Wysocki). - Make intel_pstate support all processors which advertise HWP (hardware-managed P-states) to the kernel in all operation modes and make it use the load-based P-state selection algorithm on a wider range of systems in the active mode (Rafael Wysocki). - Add cpufreq driver for Tegra186 (Mikko Perttunen). - Add support for Gemini Lake SoCs to intel_pstate (David Box). - Add support for MT8176 and MT817x to the Mediatek cpufreq driver and clean up that driver a bit (Daniel Kurtz). - Clean up intel_pstate and optimize it slightly (Rafael Wysocki). - Update the schedutil cpufreq governor, mostly to fix a couple of issues with it related to specific workloads, and rework its sysfs tunable and initialization a bit (Rafael Wysocki, Viresh Kumar). - Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers (Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar, YuanTian Tang). - Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert Uytterhoeven). - Add support for "always on" power domains to the genpd (generic power domains) framework and clean up that code somewhat (Ulf Hansson, Lina Iyer, Viresh Kumar). - Fix minor issues in the powernv cpuidle driver and clean it up (Anton Blanchard, Gautham Shenoy). - Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add an analogous boot-profiling utility called AnalyzeBoot to it (Todd Brandt). - Add rk3328 support to the rockchip-io AVS (Adaptive Voltage Scaling) driver (David Wu). - Fix minor issues in the cpuidle core, the intel_pstate_tracer utility, the devfreq framework and the PM core documentation (Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski)" * tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) PM / runtime: Document autosuspend-helper side effects PM / runtime: Fix autosuspend documentation tools: power: pm-graph: Package makefile and man pages tools: power: pm-graph: AnalyzeBoot v2.0 tools: power: pm-graph: AnalyzeSuspend v4.6 cpufreq: Add Tegra186 cpufreq driver cpufreq: imx6q: Fix error handling code cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator cpuidle: powernv: Avoid a branch in the core snooze_loop() loop cpuidle: powernv: Don't continually set thread priority in snooze_loop() cpuidle: powernv: Don't bounce between low and very low thread priority cpuidle: cpuidle-cps: remove unused variable tools/power/x86/intel_pstate_tracer: Adjust directory ownership cpufreq: schedutil: Use policy-dependent transition delays cpufreq: schedutil: Reduce frequencies slower PM / devfreq: Move struct devfreq_governor to devfreq directory PM / Domains: Ignore domain-idle-states that are not compatible cpufreq: intel_pstate: Add support for Gemini Lake powernv-cpuidle: Validate DT property array size ... |
||
Linus Torvalds
|
e69bbe75de |
Merge branch 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "The biggest core change is removal of SCT WRITE SAME support, which never worked properly. Other than that, trivial updates in core code and specific embedded driver updates" * 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: remove SCT WRITE SAME support libata: reject passthrough WRITE SAME requests dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller ata: ahci: add support for DaVinci DM816 SATA controller pata: remove the at91 driver libata: make ata_sg_clean static over again libata: use setup_deferrable_timer ata: allow subsystem to be used on m32r and s390 archs Delete redundant return value check of platform_get_resource() ata: constify of_device_id structures |
||
Linus Torvalds
|
85724edecb |
LED updates for 4.12
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJZB3/ZAAoJEL1qUBy3i3wm79YP/0lw2TXXpyrVImo9WjR7SUEB XJCQdjvmbxVfPhyb5qzUIRLImQj4RPUzQ/qwnXmj9wmAKd8tlV/3ldg/xopDZXUd XbDrvzsALIXryh6Ajfx4IMRoI7gQcQM82PBETNej2dS+1d1EUwAgoLQm99D6Q66Y mtxdHsgZZkC/yENoFg4C+RS1+29Mb9lCfIJyug/Ram2aytHqkVfHpMQpp233UWgb kkssbvMGCZJWgCS582w+S2MLFsStb1WYiDZcQt5SJSCnzzkvMEbuwHshL+5mQZpT wquY5rgqIkRPt98In+Qj/rMnXetFzbczdIUEtbyyC+PRPElYgQIehzsS8cdaPSCS 98LruhiRoTeYO1gooeGhgUjZkTDH7xOXsDpvCCXlvcwFCCjoYoKHI6Ti/krWEgo5 RAMz5BRGHvGVEAit6faGbpUT0L643g4onT52e+omcfyvzOmOsGO4BN69O9IrvTvd Jxbcj4Zh0uMZyeBvX2L4cg/9BYROhAvGXiuDr8JwOqvCOwCGrTffrFWCb0hOFGZB /JeCyplCDpLHRu4ybPtE1Ele1ylnbJ9ywCoN+VZkpsIpRD+OK4XHiKFjnt55TVXY GDt75r7oeahPXF9/sD31qzxrKCpBw/wkyEB62AxwbBWF9xo2fAv3q7mNGMQztkUy rKgb4bGIRbGFuevXoo9j =gJJi -----END PGP SIGNATURE----- Merge tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New drivers: - add LED support for MT6323 PMIC - add LED support for Motorola CPCAP PMIC New features and improvements: - add LED trigger for all CPUs aggregated which is useful on tiny boards with more CPU cores than LED pins - add OF variants of LED registering functions as a preparation for adding generic support for Device Tree parsing - dell-led improvements and cleanups, followed by moving it to the x86 platform driver subsystem which is a more appropriate place for it - extend pca9532 Device Tree support by adding the LEDs 'default-state' property - extend pca963x Device Tree support by adding nxp,inverted-out property for inverting the polarity of the output - remove ACPI support for lp3952 since it relied on a non-official ACPI IDs" * tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca9532: Extend pca9532 device tree support leds: cpcap: new driver mfd: cpcap: Add missing include dependencies leds: lp3952: Use 'if (ret)' pattern leds: lp3952: Remove ACPI support for lp3952 leds: mt6323: Fix an off by one bug in probe dt-bindings: leds: Add document bindings for leds-mt6323 leds: Add LED support for MT6323 PMIC leds: gpio: use OF variant of LED registering function leds: core: add OF variants of LED registering functions platform/x86: dell-wmi-led: fix coding style issues dell-led: move driver to drivers/platform/x86/dell-wmi-led.c dell-led: remove code related to mic mute LED platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set() dell-led: remove GUID check from dell_micmute_led_set() leds/trigger/cpu: Add LED trigger for all CPUs aggregated |
||
Linus Torvalds
|
477d7caeed |
Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar: - new driver for Broadcom FlexRM controller - constify data structures of callback functions in some drivers - a few bug fixes uncovered by multi-threaded use of mailbox channels in blocking mode * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: handle empty message in tx_tick mailbox: skip complete wait event if timer expired mailbox: always wait in mbox_send_message for blocking Tx mode mailbox: Remove depends on COMPILE_TEST for BCM_FLEXRM_MBOX mailbox: check ->last_tx_done for NULL in case of timer-based polling dt-bindings: Add DT bindings info for FlexRM ring manager mailbox: Add driver for Broadcom FlexRM ring manager dt-bindings: mailbox: Update doc with NSP PDC/mailbox support mailbox: bcm-pdc: Add Northstar Plus support to PDC driver mailbox: constify mbox_chan_ops structures |
||
Linus Torvalds
|
6fb41cbd7d |
A few fixes of things in the IPMI area, the watchdog
would have issues at panic time cause by a recently introduced change, a problem with device numbering, one possible panic in the I2C driver (destined for stable). Nothing earth-shattering, but some things that need to go in. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlkHLe4ACgkQIXnXXONXERctaACgtLPKwEc8IGFcdpQ6njZAJXm/ eNgAoIRDUTO3SstAWVtanbUEG8ao74gB =3InS -----END PGP SIGNATURE----- Merge tag 'for-linux-4.12' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "A few fixes of things in the IPMI area, the watchdog would have issues at panic time cause by a recently introduced change, a problem with device numbering, one possible panic in the I2C driver (destined for stable). Nothing earth-shattering, but some things that need to go in" * tag 'for-linux-4.12' of git://github.com/cminyard/linux-ipmi: ipmi/watchdog: fix wdog hang on panic waiting for ipmi response ipmi_si: use smi_num for init_name ipmi: bt-bmc: Add ast2500 compatible string ACPI / IPMI: change warning to debug on timeout ACPI / IPMI: allow ACPI_IPMI with IPMI_SSIF ipmi_ssif: use setup_timer ipmi: Fix kernel panic at ipmi_ssif_thread() |
||
Linus Torvalds
|
7f2ebde737 |
power supply and reset changes for the v4.12 series
* New drivers - gemini-poweroff - cpcap-charger (for Motorola Droid 4) - battery-lego-ev3 (for LEGO Mindstorms EV3) * New chip/feature support - bq24190-charger: add runtime PM support - bq24190-charger: add bq24192i support - register masking for syscon-poweroff * Misc. small fixes & cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlkG8cIACgkQ2O7X88g7 +po/2RAAhIx/0rvZsrKO3qZdJQxln0CwmJOC/Pv0V582MPLMFbazDA8G6ShQ9zaF cMe8k6Z5JlHWPn7n9Sr8hUGmWkzgzPMNxU7u1fGsPUL3b8e6wiAC7RWhnJAZniqy RfKdAuP9kzLZkksbK8f9fTIgX36ttoNfSmfKBi+jl/pS7sO8sAlxhXrzXJ/lP8Uj 32BnjXFRPzQuwrFguauIVJLYv3PiNG5UkSuRBIzk63OaZ0iK0BoT+gz77N1Y24av TjeWkNrUodTRchh10FkwDxEtmPwTOtYgVNWMpb1CF1jSD9diq5gd8vQowVQBzW9x S5HbuoLq5+LDOGXZf8FUUp7w02fNlpNDxlOFZlrfa0/B+XOCnyVMD2tTOmIOB6j4 fDvrL3Z1K1jXi93QTEnEWWGKpPZo5BNOOHYkdSD1z9tHDBhyliRQ49VJ/huqhTy0 30XbYkiEoVxpoNOUuqj6Pmb47LP1UIAMCbmGHatSBC7FTrxbeB2NcliuLDngVkNv 3xFfeYwCCta1uGdx1AKIKYz4t6rC2PqtQN0iBzUU04MYPibvMejLcZjodqRrecGu HzBsUQahXWd4/itQj4d+8WtNLYSjP5S9kbDuZ2LJg+UOrbdO6BrwUPCfB0HTsAP6 L1C7hBQmFHSn7YtjfBERg3LKV78Be5FUqiYO+jrv/N5iNI7iKrY= =Empl -----END PGP SIGNATURE----- Merge tag 'for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New drivers: - gemini-poweroff - cpcap-charger (for Motorola Droid 4) - battery-lego-ev3 (for LEGO Mindstorms EV3) New chip/feature support: - bq24190-charger: add runtime PM support - bq24190-charger: add bq24192i support - register masking for syscon-poweroff ... and misc small fixes & cleanups * tag 'for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits) power: supply: bq24190_charger: Use new extcon_register_notifier_all() power: supply: bq24190_charger: Longer delay while polling reset flag power: supply: bq24190_charger: Uniform pm_runtime_get() failure handling power: supply: bq24190_charger: Clean up extcon code power: supply: bq24190_charger: Limit over/under voltage fault logging power: supply: New driver for LEGO MINDSTORMS EV3 battery dt-bindings: power: supply: New bindings for LEGO MINDSTORMS EV3 battery power: supply: tps65217: remove debug messages for function calls power: supply: ltc2941-battery-gauge: Add OF device ID table power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding power: supply: charger-manager: simplify return statements power: supply: lp8788: prevent out of bounds array access power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost power: supply: bq24190_charger: Add support for bq24192i power: supply: bq24190_charger: Use i2c-core irq-mapping code power: bq24190_charger: mark PM functions as __maybe_unused power: supply: sbs-charger: simplified bool function power: supply: ab8500: Replaced spaces with tabs in indent power: supply: bq25890: Use gpiod_get() ... |
||
Linus Torvalds
|
cdbfbba98c |
hwmon updates for v4.12
Removed twl4030-madc driver Various minor improvements and fixes in several drivers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZBlqUAAoJEMsfJm/On5mBHigP/jlJ9DNCADg/oK2lqyHugfDH TPk37lBCGYKVVuE4uScpojU9Q/T9aSWtsQPRVJa8FzdVCuPpSfdq5zSOUdv19auR Q/45726UM7scjY+DFxt5Guj+ZR60qL/B9khCq2dCKfDe2eL3plWEyMWsYSyTt1ml EG+w1BbmmsYLLmUIRqy+otn9RqtMZPr0ZwvsBG4y8NCNJYOXDvevhzzp6nkXkupg Gx9SL7XgY9FViKTOubLX+/DANeILDhm5DV7vOL+E28fDHNZPSwQ6pWSIcxUpYFse WPaZAbpMbx39hownGSwt7jTU1m9MjjsTZ4TTVuw+jBymEQiuG8Q9d22kyc3rpiju eb9NR75Qidl5gEaPWhps9iWlabtPN+r90mtIwL4YgjrPeY+nDRRPPvaw3zIZI+iz hx2bMXAvscHQparAQ5NOhaBcsQ12ZL/FNOvTr+rkcqVoGk/psmxJOJOHMZfHk97e B78RdO/e0seJQYpniWPGG+xzbddT6xqMih+xBOaPRlxeAOcvG0M+gz9WhDNq3Dyp MDw+xM0YYhq0OKrZfCU6hi7ZII5TERioPWDkihrZ7/+5/m151oO3YbqpJStqSq04 Q29ASUn2HjI0xxI7XFg8+MlMbhWI2rCNe/p33/OsUlgYYsCFLqnBXjCmuJ45w+0P USEpljqFei6xwjX2B6br =sbJB -----END PGP SIGNATURE----- Merge tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - removed twl4030-madc driver - added ASPEED PWM/fan driver - various minor improvements and fixes in several drivers * tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits) hwmon: (twl4030-madc) drop driver hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macro hwmon: (adt7475) set start bit in probe hwmon: (ina209) Handled signed registers hwmon: (lm87) Add OF device ID table hwmon: (lm87) Remove unused I2C devices driver_data drivers: hwmon: Support for ASPEED PWM/Fan tach Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver hwmon: (lm87) Allow channel data to be set from dts file Documentation: dtb: lm87: Add hwmon binding documentation hwmon: (ads7828) Accept optional parameters from device tree hwmon: (dell-smm) Add Dell XPS 15 9560 into DMI list hwmon: Constify str parameter of hwmon_ops->read_string dt: Add vendor prefix for Sensirion hwmon: (tmp421) Add OF device ID table hwmon: (tmp103) Add OF device ID table hwmon: (tmp102) Add OF device ID table hwmon: (stts751) Add OF device ID table hwmon: (ucd9200) Add OF device ID table hwmon: (ucd9000) Add OF device ID table ... |
||
Mark Brown
|
ae53b5dbaf | Merge remote-tracking branch 'regulator/topic/vctrl' into regulator-next | ||
Mark Brown
|
81bc8e386f | Merge remote-tracking branches 'regulator/topic/notifier', 'regulator/topic/pfuze100', 'regulator/topic/settle', 'regulator/topic/tps65132' and 'regulator/topic/twl6030' into regulator-next | ||
Mark Brown
|
0603b37e1e | Merge remote-tracking branches 'regulator/topic/helpers', 'regulator/topic/hi655x', 'regulator/topic/lm363x', 'regulator/topic/ltc3589' and 'regulator/topic/ltc3676' into regulator-next | ||
Mark Brown
|
59e4c636df | Merge remote-tracking branches 'regulator/topic/anatop', 'regulator/topic/arizona', 'regulator/topic/bd9571mvw-m' and 'regulator/topic/const' into regulator-next | ||
Mark Brown
|
20d5c84bef | Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8978' and 'asoc/topic/zte-tdm' into asoc-next | ||
Mark Brown
|
258ced9d08 | Merge remote-tracking branches 'asoc/topic/uda1380', 'asoc/topic/unregister', 'asoc/topic/ux500', 'asoc/topic/wm5100' and 'asoc/topic/wm8903' into asoc-next | ||
Mark Brown
|
65fd5252b4 | Merge remote-tracking branches 'asoc/topic/sta529', 'asoc/topic/sti', 'asoc/topic/stm', 'asoc/topic/sunxi' and 'asoc/topic/tas2552' into asoc-next | ||
Mark Brown
|
ae17a14f14 | Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/simple', 'asoc/topic/sirf' and 'asoc/topic/ssm4567' into asoc-next | ||
Mark Brown
|
fc180c0eaf | Merge remote-tracking branches 'asoc/topic/rockchip', 'asoc/topic/rt5514', 'asoc/topic/rt5645' and 'asoc/topic/rt5677' into asoc-next | ||
Mark Brown
|
757fc30a1a | Merge remote-tracking branches 'asoc/topic/nau8824', 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/qcom' into asoc-next | ||
Mark Brown
|
ccf9fc86d6 | Merge remote-tracking branches 'asoc/topic/max9878', 'asoc/topic/max98927', 'asoc/topic/mtk' and 'asoc/topic/nau8540' into asoc-next | ||
Mark Brown
|
50946b2aec | Merge remote-tracking branches 'asoc/topic/fsl-ssi', 'asoc/topic/hi6220' and 'asoc/topic/imx' into asoc-next | ||
Mark Brown
|
0f57c12ab4 | Merge remote-tracking branches 'asoc/topic/es7134', 'asoc/topic/es8328', 'asoc/topic/fsl', 'asoc/topic/fsl-asrc' and 'asoc/topic/fsl-esai' into asoc-next | ||
Mark Brown
|
99dd3c53f6 | Merge remote-tracking branches 'asoc/topic/cs35l35', 'asoc/topic/cs53l30', 'asoc/topic/da7213', 'asoc/topic/dio2125' and 'asoc/topic/dwc' into asoc-next | ||
Rafael J. Wysocki
|
060d0fbb43 |
Merge branches 'pm-cpuidle', 'pm-core', 'pm-domains', 'pm-avs' and 'pm-devfreq'
* pm-cpuidle: cpuidle: powernv: Avoid a branch in the core snooze_loop() loop cpuidle: powernv: Don't continually set thread priority in snooze_loop() cpuidle: powernv: Don't bounce between low and very low thread priority cpuidle: cpuidle-cps: remove unused variable powernv-cpuidle: Validate DT property array size * pm-core: PM / runtime: Document autosuspend-helper side effects PM / runtime: Fix autosuspend documentation * pm-domains: PM / Domains: Ignore domain-idle-states that are not compatible PM / Domains: Don't warn about IRQ safe device for an always on PM domain PM / Domains: Respect errors from genpd's ->power_off() callback PM / Domains: Enable users of genpd to specify always on PM domains PM / Domains: Clean up code validating genpd's status PM / Domain: remove conditional from error case * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3328 * pm-devfreq: PM / devfreq: Move struct devfreq_governor to devfreq directory |
||
Icenowy Zheng
|
d096ae4bb0 |
dt-bindings: Add AXP803's regulator info
AXP803 have the most regulators in currently supported AXP PMICs. Add info for the regulators in the dt-bindings document. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Icenowy Zheng
|
19b465e956 |
dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
AXP803 is a PMIC produced by Shenzhen X-Powers, with either I2C or RSB bus. Add a compatible for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Icenowy Zheng
|
7366709c5a |
dt-bindings: Make AXP20X compatible strings one per line
In the binding documentation of AXP20X mfd, the compatible strings used to be listed for three per line, which leads to some mess when trying to add AXP803 compatible string (as we have already AXP806 and AXP809 compatibles, which is after AXP803 in ascending order). Make the compatible strings one per line, so that inserting a new compatible string will be directly a new line. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Marek Szyprowski
|
8f1be5bd14 |
mfd: exynos-lpass: Add support for clocks
Exynos LPASS requires some clocks to be enabled to make any access to its registers. This patch adds code for handling such clocks. For current set of registers it is enough to keep sfr0_ctrl clock enabled. Till now it worked only because those clocks were enabled by bootloader and driver probe() happened before they were disabled by clock core because of lack of users. Handling those clocks is also needed to make it possible to enable support for audio power domain. This patch requires adding sfr0_ctrl clock to device tree. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Marek Szyprowski
|
addebf1588 |
mfd: exynos-lpass: Remove pad retention control
Pad retention should be controlled from pin control driver, so remove it from Exynos LPASS driver. After this change, no more access to PMU regmap is needed, so remove also the code for handling PMU regmap. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Quentin Schulz
|
4d5db2a3a2 |
dt-bindings: input: touschcreen: Remove sun4i documentation
This patch removes the sun4i touchscreen controller binding documentation since it has been merged with the sun4i GPADC binding documentation. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Quentin Schulz
|
fe37c4b981 |
dt-bindings: mfd: Add A33 GPADC binding
This patch adds documentation for the A33 GPADC binding. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Steve Twiss
|
e1569fb64e |
dt-bindings: mfd: DA9062/61 MFD binding
Extend existing DA9062 binding information to include the DA9061 PMIC for MFD core and regulators. Add a da9062-onkey link to the existing onkey binding file. Add a da9062-thermal link to the new temperature monitoring binding file. Delete the da9062-watchdog section and replace it with a link to the new DA9061/62 binding information file. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Sean Wang
|
74772a300a |
dt-bindings: mfd: Add the description for LED as the sub module
This patch adds description for LED as the sub-module on MT6397/MT6323 multifunction device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Thor Thayer
|
66da627e0c |
dt-bindings: mfd: Add Altera Arria10 SR Reset Controller bindings
This patch adds documentation for the Altera A10-SR Reset Controller DT bindings. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |