In hists browser, press hotkey 'a' to annotate current symbol.
Now it causes segment fault if 'a' is pressed on a null symbol.
Here are 2 small bugs:
- In perf_evsel__hists_browse, the condition check after 'a' is pressed
is not correct, we should check ->sym instead of ->map.
- In symbol__tui_annotate we must check whether sym is NULL or not
before getting annotation structure.
This patch fixes above 2 small bugs.
Link: http://lkml.kernel.org/r/1302244286.4106.36.camel@minggr.sh.intel.com
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix this:
util/cgroup.c: In function ‘open_cgroup’:
util/cgroup.c:16:16: error: ‘saved_ptr’ may be used uninitialized in this function
util/cgroup.c:16:16: note: ‘saved_ptr’ was declared here
Apparently newer GCC (4.6) can figure out that this variable is properly
initialized - but some versions of GCC (such as 4.5.2) need help.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, fpu: Fix FPU exception handling on non-SSE systems
x86, hibernate: Initialize mmu_cr4_features during boot
x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
x86: visws: Fixup irq overhaul fallout
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Clean up rebalance_domains() load-balance interval calculation
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix cpumask leak in __setup_irq()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix listing incorrect line number with inline function
perf probe: Fix to find recursively inlined function
perf probe: Fix multiple --vars options behavior
perf probe: Fix to remove redundant close
perf probe: Fix to ensure function declared file
Fix a bug showing incorrect line number when a probe is put on the head of an
inline function. This patch updates find_perf_probe_point() and introduces new
rules to get correct line number.
- If debuginfo doesn't have a correct file name, we shouldn't return line
number too, because, without file name, line number is meaningless.
- If the address is in a function, it stores the function name and the offset
from the function entry.
- If the address is on a line, it tries to get the relative line number from
the function entry line, except for the address is same as the entry
address of the function (in this case, the relative line number should
be 0).
- If the address is in an inline function entry (call-site), it uses the
inline function call line number as the line on which the address is.
- If the address is in an inline function body, it stores the inline
function name and offset from the inline function call site instead of the
(non-inlined) function.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092605.2132.11629.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix die_find_inlinefunc() to return correct innermost inlined function
at given address. Without this fix, it returns the outermost inlined
function.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092559.2132.78634.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a bug that perf-probe fails to initialize libdwfl and shows incorrect error
when user gives multiple --vars options.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092553.2132.42691.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since dwfl_end() closes given fd with dwfl, caller doesn't need to close its fd
when finishing process.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092547.2132.93728.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to ensure function declared file matches given file name. This fixes
a potential bug.
As I've commented on Lin Ming's fastpath enhancement, decl_file should
be checked on each probe point if user gives a probe point as func@file.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092541.2132.3584.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pick up these two commits from Arnaldo's perf/core tree:
ca6a42586f: perf tools: Emit clearer message for sys_perf_event_open ENOENT return
c286c419c7: perf tools: Fixup exit path when not able to open events
As they are really fixes we want to have sooner than laer.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the following build error:
GEN python/perf.so
In file included from util/evsel.h:10,
from util/python.c:6:
util/hist.h:106:18: error: newt.h: No such file or directory
error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1
make: *** [python/perf.so] Error 1
by passing BASIC_CFLAGS to setup.py. BASIC_CFLAGS variable contains
the -DNO_NEWT_SUPPORT switch which prevents building python c
extension with newt.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20110329180236.GA19366@erda.amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If symbol_conf.priv_size is not a multiple of "sizeof(u64)" we'll bus
error on sparc64 in symbol__new because the "struct symbol *" pointer
is computed by adding symbol_conf.priv_size to the memory allocated.
We cannot isolate the fix to symbol__new and symbol__delete since the
private area is computed by subtracting the priv_size value from a
"struct symbol" pointer, so then the private area can still be
potentially unaligned.
So, simply align the symbol_conf.priv_size value in symbol__init()
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110328.175849.112593455.davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
v3 -> v2:
- Make pubname_search_cb more generic
- Add fastpath to find_probes also
v2 -> v1:
- Don't compare file names with cu_find_realpath(...), instead, compare
them with the name returned by dwarf_decl_file(sp_die)
The vmlinux file may have thousands of CUs.
We can lookup function name from .debug_pubnames section
to avoid the slow loop on CUs.
1. Improvement data for find_line_range
./perf stat -e cycles -r 10 -- ./perf probe -k /home/mlin/vmlinux \
-s /home/mlin/linux-2.6 \
--line csum_partial_copy_to_user > tmp.log
before patch applied
=====================
847,988,276 cycles
0.355075856 seconds time elapsed
after patch applied
=====================
206,102,622 cycles
0.086883555 seconds time elapsed
2. Improvement data for find_probes
./perf stat -e cycles -r 10 -- ./perf probe -k /home/mlin/vmlinux \
-s /home/mlin/linux-2.6 \
--vars csum_partial_copy_to_user > tmp.log
before patch applied
=====================
848,490,844 cycles
0.355307901 seconds time elapsed
after patch applied
=====================
205,684,469 cycles
0.086694010 seconds time elapsed
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
LKML-Reference: <1301041668.14111.52.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have to deal with the TUI mode in perf top, so that we don't end up
with a garbled screen when, say, a non root user on a machine with a
paranoid setting (the default) tries to use 'perf top'.
Introduce a ui__warning_paranoid() routine shared by top and record that
tells the user the valid values for /proc/sys/kernel/perf_event_paranoid.
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf can't currently trace into the vsyscall page. It looks like it was
meant to work.
Tested on 2.6.38 and today's -git.
The bug is easy to reproduce. Compile this:
int main()
{
int i;
struct timespec t;
for(i = 0; i < 10000000; i++)
clock_gettime(CLOCK_MONOTONIC, &t);
return 0;
}
and run it through perf record; perf report. The top entry shows
"[unknown]" and you can't zoom in.
It looks like there are two issues. The first is a that a test for user
mode executing in kernel space is backwards. (That's the first hunk
below). The second (I think) is that something's wrong with the code
that generates lots of little struct dso objects for different sections
-- when it runs on vmlinux it results in bogus long_name values which
cause objdump to fail.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LPU-Reference: <AANLkTikxSw5+wJZUWNz++nL7mgivCh_Zf=2Kq6=f9Ce_@mail.gmail.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The original intent of the code was to repeat the search with
want_symtab = 0. But as the code stands now, we never hit the "default"
case of the switch statement. Which means we never repeat the search.
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Arun Sharma <asharma@fb.com>
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The a1645ce1 changeset:
"perf: 'perf kvm' tool for monitoring guest performance from host"
Added a field to struct build_id_event that broke the file format.
Since the kernel build-id is the first entry, process the table using
the old format if the well known '[kernel.kallsyms]' string for the
kernel build-id has the first 4 characters chopped off (where the pid_t
sits).
Reported-by: Han Pingtian <phan@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.
Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some versions of grep don't treat '\s' properly. When building perf on such
systems and using a kernel tarball the perf version is unable to be determined
from the main kernel Makefile and the user is left with a version of '..'.
Replacing the use of '\s' with '[[:space:]]', which should work in all grep
versions, gives a usable version number.
Reported-by: Tapan Dhimant <tdhimant@akamai.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tapan Dhimant <tdhimant@akamai.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@kernel.org
LKML-Reference: <1300241800-30281-1-git-send-email-johunt@akamai.com>
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (184 commits)
perf probe: Clean up probe_point_lazy_walker() return value
tracing: Fix irqoff selftest expanding max buffer
tracing: Align 4 byte ints together in struct tracer
tracing: Export trace_set_clr_event()
tracing: Explain about unstable clock on resume with ring buffer warning
ftrace/graph: Trace function entry before updating index
ftrace: Add .ref.text as one of the safe areas to trace
tracing: Adjust conditional expression latency formatting.
tracing: Fix event alignment: skb:kfree_skb
tracing: Fix event alignment: mce:mce_record
tracing: Fix event alignment: kvm:kvm_hv_hypercall
tracing: Fix event alignment: module:module_request
tracing: Fix event alignment: ftrace:context_switch and ftrace:wakeup
tracing: Remove lock_depth from event entry
perf header: Stop using 'self'
perf session: Use evlist/evsel for managing perf.data attributes
perf top: Don't let events to eat up whole header line
perf top: Fix events overflow in top command
ring-buffer: Remove unused #include <linux/trace_irq.h>
tracing: Add an 'overwrite' trace_option.
...
Newer compilers (gcc 4.6) complains about:
return ret < 0 ?: 0;
For the following reason:
util/probe-finder.c: In function ‘probe_point_lazy_walker’:
util/probe-finder.c:1331:18: error: the omitted middle operand in ?: will always be ‘true’, suggest explicit middle operand [-Werror=parentheses]
And indeed the return value is a somewhat obscure (but correct) value
of 'true', so return 'ret' instead - this is cleaner and unconfuses
GCC as well.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This change does impact output: latency data is trace specific and is
now printed after the common data - comm, tid, cpu, time and event name.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-4-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Next patch moves printing of 'common' data into perf-script which
removes the need for these functions.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-3-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prepare for handling of samples for any event type.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-2-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While going thru each of the sym_entry fields looking to reduce it to
the set of entries needed when in an active symbols list, 'skip' should
really be in symbol, as we set it when loading the symtab.
And the space used by the basic symbol allocation remains the same as
we had 5 bytes of padding.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And the DSO__ORIG_ enum to SYMTAB__, to clarify that this is about from
where the symtab was obtained.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can get it from syme->map->dso->kernel (that should be renamed to
origin, but leave this for another patch).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can get that counter index from perf_top->sym_evsel->idx instead.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of tools/perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing multiple events might force out information about pid/tid/cpu.
Attached patch leaves 30 characters for this info at the expense of the
events' names.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Han Pingtian <phan@redhat.com>
LKML-Reference: <1299528821-17521-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The snprintf function returns number of printed characters even if it
cross the size parameter. So passing enough events via '-e' parameter
will cause segmentation fault.
It's reproduced by following command:
perf top -e `perf list | grep Tracepoint | awk -F'[' '\
{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];\
for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`
Attached patch is adding SNPRINTF macro that provides the overflow check
and returns actuall number of printed characters.
Reported-by: Han Pingtian <phan@redhat.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299528821-17521-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kallsyms has a virtual file name [kernel.kallsyms]. Currently, it can't
be added to buildid cache successfully because the code
(build_id_cache__add_s) tries to resolve [kernel.kallsyms] to a real
absolute pathname and that fails.
Fixes it by not resolving it and just use the name [kernel.kallsyms].
So dir ~/.debug/[kernel.kallsyms] is created.
Original bug report at:
https://lkml.org/lkml/2011/3/1/524
Tested-by: Han Pingtian <phan@redhat.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299165837-27817-1-git-send-email-ming.m.lin@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When multiple events were used in 'perf record', allow the user to
choose which one is wanted before showing the per event histograms.
Annotations will be performed on the chosen event.
Allow going back and forth from event to event quickly using just the
arrow keys and enter.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: William Cohen <wcohen@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.
More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.
But the overall goal/trend is to more uniformly use evsels and evlists.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous situation was to receive an fd from where to read the event
ID.
Spin off a routine for when we have the ID handy, not having to read it
from some fd.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support multiple events we need to do these calcs per 'struct hists'
instance, and it turns out we already do that at:
__hists__add_entry
hists__inc_nr_entries
hists__calc_col_len
for all the unfiltered hist_entry instances we stash in the rb tree, so
trow away the dead code.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TAB/UNTAB were not hotkeys, so didn't exit hists__browse back to
hists__tui_browse_tree, allowing just the first event to be browsed.
Reported-by: William Cohen <wcohen@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: William Cohen <wcohen@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PyVarObject_HEAD_INIT is undefined in python 2.5, resulting
in a build crash:
util/python.c:81: attention : déclaration implicite de la fonction « «PyVarObject_HEAD_INIT» »
util/python.c:82: erreur: request for member «tp_name» in something not a structure or union
util/python.c:117: erreur: request for member «tp_name» in something not a structure or union
util/python.c:146: erreur: request for member «tp_name» in something not a structure or union
util/python.c:177: erreur: request for member «tp_name» in something not a structure or union
util/python.c:290: erreur: request for member «tp_name» in something not a structure or union
util/python.c:359: erreur: request for member «tp_name» in something not a structure or union
util/python.c:532: erreur: request for member «tp_name» in something not a structure or union
util/python.c:761: erreur: request for member «tp_name» in something not a structure or union
error: command 'gcc' failed with exit status 1
make: *** [python/perf.so] Erreur 1
We can fix that by defining PyVarObject_HEAD_INIT as a wrapper on
PyObject_HEAD_INIT, thanks to a trick found on biopython:
d4eaf57946
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
<ctype.h> is included first without _GNU_SOURCE, so it ends up
including <string.h> without declaring strndup(). And further
<string.h> declarations, even with _GNU_SOURCE defined, are
of course without effect.
Therefore:
util/strfilter.c: Dans la fonction «strfilter_node__new» :
util/strfilter.c:134: attention : déclaration implicite de la fonction « «strndup» »
util/strfilter.c:134: attention : incompatible implicit declaration of built-in function «strndup»
make: *** [util/strfilter.o] Erreur 1
Just don't include ctype.h as it doesn't appear to be necessary
anyway.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently set the filters after we mmap the events, this is a
race that let undesired events record themselves in the buffer before
we had the time to set the filters.
So set the filters before they can be recorded. That also librarizes
the filters setting so that filtering can be done more easily
from other tools than perf record later.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
By taking the ui__lock so that no other screen updates take place while
waiting for the user.
That was happening when handling an invalid --vmlinux parameter in 'perf
top --tui', with the screen refresh routine repainting the screen and
removing the warning window.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing a SEGV. An empty list could happen when not being able to resolve
symbols, for instance when --vmlinux invalid-file is used.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ec5761e cset introduced the symfs feature with a bug for loading vmlinux
files that ended up causing this failure:
[root@emilia v2.6.38-rc5+]# strace -e trace=open perf top --vmlinux ./vmlinux 2>&1 | tail -3
open("/./vmlinux", O_RDONLY) = -1 ENOENT (No such file or directory)
./vmlinux with build id b9266bf40e98dadb5d43a2f3e95d3c5d4aff46dc not found, continuing without symbols
The ./vmlinux file can't be used
[root@emilia v2.6.38-rc5+]#
Remove the extra slash, just like is done in the DSO__ORIG_DSO handling in
dso__load() and other parts of the ec5761e cset.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fix is needed for eye of gnome and firefox svg viewers.
Only Inkscape can handle the broken case.
Compare with the other svg_legenda_box declarations, looks
like a typo slipped in at this place.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Needed because we were only showing the title in ui_browser__show,
not in ui_browser__run, and in the run loop we may be calling other
browsers that would then change the title, when we go back to the
previous browser, we need to redraw the title.
We could have done this as the Newt help line, with pop, etc, but I
don't think its worth, doing it explicitely, when needed (some browsers
may not use the title area at all) seems enough/more flexible.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The left key was exiting 'perf top --tui' when it really shouldn't, it
was too easy to leave the live annotation window and then press one too
many <- and get out of the tool altogether.
Do just like the report TUI does, ignore the left key for exit and also
ask the user when pressing ESC if that is really what is wanted.
Reported-by: Mike Galbraith <efault@gmx.de>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In both --tui and --stdio, in 'annotate', 'top', 'report' when trying to
annotate a kernel symbol having just access to a kallsyms file, that
doesn't have the DWARF info needed for annotation.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not a problem when we're not at the bottom of the active symbols
list, so was not noticed, but at the end of the screen it falls apart.
Fix it by adjusting the ui_browser indexes according to the new number
of entries in the rb_tree and by seeking from the start of the rb_tree
to find the new symbol at the top of the screen.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now one has just to press the right key, 'a' or Enter on the main 'perf
top --tui' screen to live annotate the symbol under the cursor.
The annotate window starts centered on the hottest line (the one with
most samples so far) then TAB and shift+TAB can be used to go to the
prev/next hot line.
Pressing 'H' at any point will center again the screen on the hottest
line.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While fixing an error propagating problem in f809b25 I added two
redundant checks.
I did that because I didn't expect the checks to be on the while and for
loop condition expression, where they are tested before we run the loop,
where the 'ret' variable is set.
So remove it from there and leave it just after it is actually set,
eliminating unneded tests.
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel refuses mmapping an event with the inherit flag set for
something that is systemwide (cpu == -1), and the evsel layer got this
reversed at some point, fix it.
The symtom was that the --pid and --tid parameters for 'perf record' and
'perf top' returned with -EINVAL, like:
# /tmp/build-perf/perf record -v -fo/tmp/perf.data -p 1042
Warning: ... trying to fall back to cpu-clock-ticks
Fatal: failed to mmap with 22 (Invalid argument)
Reported-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two hunks in this patch that stops probe processing as soon as one
error is found, breaking out of loops, the other fix an error propagation that
should return a negative error number but instead was returning the result of
"ret < 0", which is 1 and thus made several error checks fail because they test
agains < 0.
The problem could be triggered by asking for a variable that was optimized out,
fact that should stop the whole probe processing but instead was segfaulting
while installing broken probes:
[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
Add new events:
probe:perf_mmap (on perf_mmap:55 with user_lock_limit)
probe:perf_mmap_1 (on perf_mmap:55 with user_lock_limit)
Segmentation fault (core dumped)
[root@emilia ~]# perf probe -l
probe:perf_mmap (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
probe:perf_mmap_1 (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
[root@emilia ~]#
After the fix:
[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
Error: Failed to add events. (-2)
[root@emilia ~]#
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit squashes several commits that remove:
unnecessary uname calls
`sh -c'
BUILT_INS and QUIET_BUILT_IN
They have no effect, and the `fixup-builtins' and `check-builtins.sh'
scripts don't even exist.
RUNTIME_PREFIX
It's currently never anything but unset, and it's apparently
only meaningful when Microsoft Windows is the operating system
(according to the source for git).
TEST_PROGRAMS
EXTRA_PROGRAMS
unused SHELL_PATH_SQ portions
unused test for V=2
useless exports
Only when `V' is undefined (that is, only when the value of `V'
is empty) is `export V' performed, which just has the effect of
placing the empty-valued variable `V' in the environment.
The only other script to make use of `V' is `Documentation/Makefile',
which only checks whether `V' is undefined (that is, whether the value
of `V' is empty); hence, the `export V' has no effect whatsoever.
Similarly, `export QUIET_GEN' is useless because it will only have
a non-empty value when `V' has an empty-value, and when `V' has
an empty-value, `QUIET_GEN' is always explicitly set in every
script in which it is used.
`DESTDIR' is only ever defined by the user via the environment
or the command line, both of which are automatically exported
to sub-make processes. Furthermore, no non-make sub-scripts
make use of `DESTDIR' as an environment variable.
No other scripts use `perfexec_instdir'.
unused QUIET_SUBDIR{0,1}
TAR and RPMBUILD
PTHREAD_LIBS
Maintainer's dist rules and commands
distclean target
Test suite coverage testing
PRINT_DIR and NO_SUBDIR
`configure' target
NO_CURL
@@PERF_VERSION@@ substitution
Without the sed command, all of the rule's commands can be reduced
to a single line that copies a file and sets the permissions properly
in the process.
`make test' echo line
template_instdir
PERF-BUILD-OPTIONS
double-colon rules
The use of double-colon rules seems misguided or vestigial git.
Essentially hard-coded $(SCRIPTS) expansion
Signed-off-by: Michael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While it makes sense that this tool could be used on
other platforms at least to parse data, there doesn't
appear to be any real support for such usage.
This commit squashes several commits that remove:
SNPRINTF_RETURNS_BOGUS
FREAD_READS_DIRECTORIES
NO_D_{INO,TYPE}_IN_DIRENT
NO_STRCASESTR
NO_MEMMEM
NO_STRTOUMAX and NO_STRTOULL
NO_SETENV
NO_UNSETENV
NO_MKDTEMP
NEEDS_LIBICONV
NEEDS_SOCKET
NO_MMAP
NO_PTHREADS
NO_PREAD
NO_TRUSTABLE_FILEMODE
NO_IPV6 and NO_SOCKADDR_STORAGE
NO_ICONV and OLD_ICONV
NO_NSEC, USE_NSEC, and USE_ST_TIMESPEC
NO_ST_BLOCKS_IN_STRUCT_STAT
NO_FINK and NO_DARWIN_PORTS
NO_SYS_SELECT_H
NO_HSTRERROR
DIR_HAS_BSD_GROUP_SEMANTICS and FORCE_DIR_SET_GID
NEEDS_NSL, NO_UINTMAX_T, NO_INET_{N,P}TON
COMPAT_{CFLAGS,OBJS}
Executable extension `X'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).
This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.
This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.
$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011
Performance counter stats for 'date':
568600 cycles:u
2779715 cycles:k
0.001908182 seconds time elapsed
Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d "Add cgroup support" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 023695d cset added a new file, util/cgroup.c, that is referenced from
util/evsel.c, so it needs to be present in util/setup.py so that the python
shared object binding works, fixing this:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/python/
[root@emilia linux]# ./tools/perf/python/twatch.py
Traceback (most recent call last):
File "./tools/perf/python/twatch.py", line 16, in <module>
import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: close_cgroup
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show filename which contains a target function with the function name on
"--lines" mode, because perf-probe just shows the first function even if
there are many same-name functions.
Originally adopted by Franck Bui-Huu's patch which shows file name
instead of function name. I've just modified it to show both of function
name and file name, because of completeness of output.
E.g.)
$ perf probe -L t_show
<t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/ftrace.c:0>
0 static int t_show(struct seq_file *m, void *v)
1 {
2 struct ftrace_iterator *iter = m->private;
...
$ perf probe -L t_show@trace/trace.c
<t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/trace.c:0>
0 static int t_show(struct seq_file *m, void *v)
1 {
struct tracer *t = v;
...
Original-patch-by: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110210090816.1809.43426.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not just for the percentage number, to see the hot lines more easily.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like done on symbol__inc_addr_samples to catch misparsed offsets
from objdump.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui operations so far were used by just one thread, but 'perf top
--tui' now has two threads updating the screen, so we need to use a
mutex to avoid garbling the screen.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixups due to rename of event_t routines from event__ to perf_event__
done in perf/core.
Conflicts:
tools/perf/builtin-record.c
tools/perf/builtin-top.c
tools/perf/util/event.c
tools/perf/util/event.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jeff Moyer reported these messages:
Warning: ... trying to fall back to cpu-clock-ticks
couldn't open /proc/-1/status
couldn't open /proc/-1/maps
[ls output]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (~363 samples) ]
That lead me and David Ahern to see that something was fishy on the thread
synthesizing routines, at least for the case where the workload is started
from 'perf record', as -1 is the default for target_tid in 'perf record --tid'
parameter, so somehow we were trying to synthesize the PERF_RECORD_MMAP and
PERF_RECORD_COMM events for the thread -1, a bug.
So I investigated this and noticed that when we introduced support for
recording a process and its threads using --pid some bugs were introduced and
that the way to fix it was to instead of passing the target_tid to the event
synthesizing routines we should better pass the thread_map that has the list of
threads for a --pid or just the single thread for a --tid.
Checked in the following ways:
On a 8-way machine run cyclictest:
[root@emilia ~]# perf record cyclictest -a -t -n -p99 -i100 -d50
policy: fifo: loadavg: 0.00 0.13 0.31 2/139 28798
T: 0 (28791) P:99 I:100 C: 25072 Min: 4 Act: 5 Avg: 6 Max: 122
T: 1 (28792) P:98 I:150 C: 16715 Min: 4 Act: 6 Avg: 5 Max: 27
T: 2 (28793) P:97 I:200 C: 12534 Min: 4 Act: 5 Avg: 4 Max: 8
T: 3 (28794) P:96 I:250 C: 10028 Min: 4 Act: 5 Avg: 5 Max: 96
T: 4 (28795) P:95 I:300 C: 8357 Min: 5 Act: 6 Avg: 5 Max: 12
T: 5 (28796) P:94 I:350 C: 7163 Min: 5 Act: 6 Avg: 5 Max: 12
T: 6 (28797) P:93 I:400 C: 6267 Min: 4 Act: 5 Avg: 5 Max: 9
T: 7 (28798) P:92 I:450 C: 5571 Min: 4 Act: 5 Avg: 5 Max: 9
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (~4719 samples) ]
[root@emilia ~]#
This will create one extra thread per CPU:
[root@emilia ~]# tuna -t cyclictest -CP
thread ctxt_switches
pid SCHED_ rtpri affinity voluntary nonvoluntary cmd
28825 OTHER 0 0xff 2169 671 cyclictest
28832 FIFO 93 6 52338 1 cyclictest
28833 FIFO 92 7 46524 1 cyclictest
28826 FIFO 99 0 209360 1 cyclictest
28827 FIFO 98 1 139577 1 cyclictest
28828 FIFO 97 2 104686 0 cyclictest
28829 FIFO 96 3 83751 1 cyclictest
28830 FIFO 95 4 69794 1 cyclictest
28831 FIFO 94 5 59825 1 cyclictest
[root@emilia ~]#
So we should expect only samples for the above 9 threads when using the
--dump-raw-trace|-D perf report switch to look at the column with the tid:
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
629 28825
110 28826
491 28827
308 28828
198 28829
621 28830
225 28831
203 28832
89 28833
[root@emilia ~]#
So for workloads started by 'perf record' seems to work, now for existing workloads,
just run cyclictest first, without 'perf record':
[root@emilia ~]# tuna -t cyclictest -CP
thread ctxt_switches
pid SCHED_ rtpri affinity voluntary nonvoluntary cmd
28859 OTHER 0 0xff 594 200 cyclictest
28864 FIFO 95 4 16587 1 cyclictest
28865 FIFO 94 5 14219 1 cyclictest
28866 FIFO 93 6 12443 0 cyclictest
28867 FIFO 92 7 11062 1 cyclictest
28860 FIFO 99 0 49779 1 cyclictest
28861 FIFO 98 1 33190 1 cyclictest
28862 FIFO 97 2 24895 1 cyclictest
28863 FIFO 96 3 19918 1 cyclictest
[root@emilia ~]#
and then later did:
[root@emilia ~]# perf record --pid 28859 sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data (~1195 samples) ]
[root@emilia ~]#
To collect 3 seconds worth of samples for pid 28859 and its children:
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
15 28859
33 28860
19 28861
13 28862
13 28863
10 28864
11 28865
9 28866
255 28867
[root@emilia ~]#
Works, last thing is to check if looking at just one of those threads also works:
[root@emilia ~]# perf record --tid 28866 sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.006 MB perf.data (~242 samples) ]
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
3 28866
[root@emilia ~]#
Works too.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The live annotation done in 'perf top' needs to limit the context before
lines that aren't filtered out by the min percent filter, if we don't do
that, the screen in a tty often is not enough for showing what is
interesting: lines with hits and a few source code lines before it.
Reported-by: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we'll need it when implementing the live annotate TUI browser.
This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The checks for not using a max_lines parameter were b0rked, problem
introduced in 3653246.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A small fix for when NO_NEWT_SUPPORT is defined.
Add a missing "struct" to the function prototype.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20110207143218.GA31197@kryptos.osrc.amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC 4.6.0 in Fedora rawhide turned up some compile errors in tools/perf
due to the -Werror=unused-but-set-variable flag.
I've gone through and annotated some of the assignments that had side
effects (ie: return value from a function) with the __used annotation,
and in some cases, just removed unused code.
In a few cases, we were assigning something useful, but not using it in
later parts of the function.
kyle@dreadnought:~/src% gcc --version
gcc (GCC) 4.6.0 20110122 (Red Hat 4.6.0-0.3)
Cc: Ingo Molnar <mingo@redhat.com>
LKML-Reference: <20110124161304.GK27353@bombadil.infradead.org>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
[ committer note: Fixed up the annotation fixes, as that code moved recently ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use pid_t data type for target_{pid|tid} vars.
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110205203938.GA15328@hera.kernel.org>
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
[ committer note: those variables are now in struct perf_top, fixed ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Next step: Live TUI annotation in perf top, just press enter on a symbol
line.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because in 'perf top' we'll need to parse just once and then, as samples
come, render multiple times with evolving counter values.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Max line# that should be printed, minimum percentage filter, just like
'perf top', alas, due to it :-)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf annotate tool continues aggregating everything on just one
histograms, but to support the top model add support for one histogram
perf evsel in the evlist.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They will be used by perf top, so that we have just one set of routines
to do annotation.
Rename "struct sym_priv" to "struct annotation", etc, to clarify this
code a bit.
Rename "struct sym_ext" to "struct source_line", to give it a meaningful
name, that clarifies that it is a the result of an addr2line call, that
is sorted by percentage one particular source code line appeared in the
annotation.
And since we're moving things around also rename 'sym_hist->ip' to
'sym_hist->addr' as we want to do data structure annotation at some
point.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From the sym_entry struct, struct symbol already has this field.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduced in: c52b12ed, when this sequence:
count[0] = count[1] = count[2] = 0;
Was replaced with:
aggr->val = 0;
Which is equivalent to zeroing just the first entry in the 'count'
array.
Fix it by zeroing the three entries with:
aggr->val = aggr->ena = aggr->run = 0;
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
> + slsmg_write_nstring(width >= syme->map->dso->long_name_len ?
> + syme->map->dso->long_name :
> + syme->map->dso->short_name, width);
need update macro for that calling
util/ui/browsers/top.c: In function ‘perf_top_browser__write’:
util/ui/browsers/top.c:60:2: error: cast to pointer from integer of different size
util/ui/browsers/top.c:60:2: error: comparison between pointer and integer
util/ui/browsers/top.c:60:2: error: passing argument 1 of ‘SLsmg_write_nstring’ discards qualifiers from pointer target type
/usr/include/slang.h:1728:16: note: expected ‘char *’ but argument is of type ‘const char *’
make: *** [util/ui/browsers/top.o] Error 1
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4D48562B.20006@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Where there are lots of errors related to python methods receiving
'char *' for things like file open mode, which break the build, also
disable strict aliasing and fixup some other warnings. Now builds on
both 32-bit and 64-bit fedora systems.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disabled by default as there are features found in the stdio based one
that aren't implemented, like live annotation, filtering knobs data
entry.
Annotation hopefully will get somehow merged with the 'perf annotate'
code.
To use it:
perf top --tui
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because in tools like 'top' we don't want the pager.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paving the way for a slang browser a la 'perf report --tui'.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't have to pass it around to the several methods that
needs it, simplifying usage.
There is one case where we don't have the thread/cpu map in advance,
which is in the parsing routines used by top, stat, record, that we have
to wait till all options are parsed to know if a cpu or thread list was
passed to then create those maps.
For that case consolidate the cpu and thread map creation via
perf_evlist__create_maps() out of the code in top and record, while also
providing a perf_evlist__set_maps() for cases where multiple evlists
share maps or for when maps that represent CPU sockets, for instance,
get crafted out of topology information or subsets of threads in a
particular application are to be monitored, providing more granularity
in specifying which cpus and threads to monitor.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were on evsel.c because they came from refactoring existing evsel
methods, so, to make reviewing the changes easier, I kept it there, now
its a plain move.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And move the event_t methods to the perf_event__ too.
No code changes, just namespace consistency.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. stash the overwrite mode in struct perf_evlist and act accordingly
in perf_evlist__read_on_cpu, not checking for overwrites and touching
the tail after consuming one event, like perf record does, for instance.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now this function is only used by perf top, that uses PROT_READ
only, i.e. overwrite mode, so no PERF_RECORD_LOST events are generated,
but don't forget those events.
The patch that moved this out of perf top was made so that this routine
could be used by 'perf probe' in the uprobes patchset, so perhaps there
they need to check for LOST events and warn the user, as will be done in
the following patches that will switch 'perf top' to non overwrite mode
(mmap with PROT_READ|PROT_WRITE).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add filters support for available variable list.
Default filter is "!__k???tab_*&!__crc_*" for filtering out
automatically generated symbols.
The format of filter rule is "[!]GLOBPATTERN", so you can use wild
cards. If the filter rule starts with '!', matched variables are filter
out.
e.g.:
# perf probe -V schedule --externs --filter=cpu*
Available variables at schedule
@<schedule+0>
cpumask_var_t cpu_callout_mask
cpumask_var_t cpu_core_map
cpumask_var_t cpu_isolated_map
cpumask_var_t cpu_sibling_map
int cpu_number
long unsigned int* cpu_bit_bitmap
...
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110120141539.25915.43401.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ committer note: Removed the elf.h include as it was fixed up in e80711c]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add strfilter for general purpose string filter.
Every filter rules are descrived by glob matching pattern and '!' prefix
which means Logical NOT.
A strfilter consists of those filter rules connected with '&' and '|'.
A set of rules can be folded by using '(' and ')'.
It also accepts spaces around rules and those operators.
Format:
<rule> ::= <glob-exp> | "!" <rule> | <rule> <op> <rule> | "(" <rule> ")"
<op> ::= "&" | "|"
e.g.:
"(add* | del*) & *timer" filter rules pass strings which start with add
or del and end with timer.
This will be used by perf probe --filter.
Changes in V2:
- Fix to check result of strdup() and strfilter__alloc().
- Encapsulate and simplify interfaces as like regex(3).
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110120141530.25915.12673.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the {con,des}structor, as in interpreted language bindings we will
need to go back from the wrapper object to the real thing. In that case
using container_of will save us to have an extra pointer in the perf_evsel
struct.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid linking more stuff in the python binding I'm working on, future
csets will make the sample type be taken from the evsel itself, but for
that we need to first have one file per cpu and per sample_type, not a
single perf.data file.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To untangle it from struct thread handling, that is tied to symbols, etc.
Right now in the python bindings I'm working on I need just a subset of
the util/ files, untangling it allows me to do that.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is needed because it will call parse_event for each tracepoint
name that matches, and we pass the perf_evlist via opt->value.
Problem introduced in 4503fdd where my assumption about opt being
always non NULL made me not look at callers of parse_events outside
builtin-*.c.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce die_walk_lines() for walking on the line list of given die, and use
it in line_range finder and probe point finder.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110113124558.22426.48170.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ committer note: s/%ld/%zd/ for a size_t nlines var that broke f14 x86 build]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some little callchain tree nodes shyly asked me if they can have
sisters.
How cute!
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the callchain API naming more consistent.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That makes the callchain API naming more consistent and
reduce potential naming clashes.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchains are fed with an array of a fixed size.
As a result we iterate over each callchains three times:
- 1st to resolve symbols
- 2nd to filter out context boundaries
- 3rd for the insertion into the tree
This also involves some pairs of memory allocation/deallocation
everytime we insert a callchain, for the filtered out array of
addresses and for the array of symbols that comes along.
Instead, feed the callchains through a linked list with persistent
allocations. It brings several pros like:
- Merge the 1st and 2nd iterations in one. That was possible before
but in a way that would involve allocating an array slightly taller
than necessary because we don't know in advance the number of context
boundaries to filter out.
- Much lesser allocations/deallocations. The linked list keeps
persistent empty entries for the next usages and is extendable at
will.
- Makes it easier for multiple sources of callchains to feed a
stacktrace together. This is deemed to pave the way for cfi based
callchains wherein traditional frame pointer based kernel
stacktraces will precede cfi based user ones, producing an overall
callchain which size is hardly predictable. This requirement
makes the static array obsolete and makes a linked list based
iterator a much more flexible fit.
Basic testing on a big perf file containing callchains (~ 176 MB)
has shown a throughput gain of about 11% with perf report.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used in the upcoming 'perf test' entry for the evlist mmap
routines.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adopting the new model used in 'perf record', where we don't have a map
per thread per cpu, instead we have an mmap per cpu, established on the
first fd for that cpu and ask the kernel using the
PERF_EVENT_IOC_SET_OUTPUT ioctl to send events for the other fds on that
cpu for the one with the mmap.
The methods moved from perf_evsel to perf_evlist, but for easing review
they were modified in place, in evsel.c, the next patch will move the
migrated methods to evlist.c.
With this 'perf top' now uses the same mmap model used by 'perf record'
and the next patches will make 'perf record' use these new routines,
establishing a common codebase for both tools.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code in 'perf top'. Record is next in line.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is a per-cpu attribute, we can't set it up in advance and use it
for all the calls.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_evsel__open now have an extra boolean argument specifying if
event grouping is desired.
The first file descriptor created on a CPU becomes the group leader.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allocating just the space needed for nr_cpus * nr_threads * nr_evsels,
not the MAX_NR_CPUS and counters.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Killing two more perf wide global variables: nr_counters and evsel_list
as a list_head.
There are more operations that will need more fields in perf_evlist,
like the pollfd for polling all the fds in a list of evsel instances.
Use option->value to pass the evsel_list to parse_{events,filters}.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's enough to include the local "debug.h" file to trigger it.
man time reveals this is already declared in glibc:
time - get time in seconds
-> rename the variable.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: arjan@infradead.org
LPU-Reference: <1295620209-13859-2-git-send-email-trenn@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[acme@localhost linux]$ make O=~acme/git/build/perf -C tools/perf
make: Entering directory `/home/acme/git/linux/tools/perf'
Makefile:526: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev
Makefile:582: newt not found, disables TUI support. Please install newt-devel or libnewt-dev
CC /home/acme/git/build/perf/builtin-annotate.o
In file included from builtin-annotate.c:23:
util/parse-events.h:26: warning: declaration of 'evsel_list' shadows a global declaration
util/parse-events.h:12: warning: shadowed declaration is here
make: *** [/home/acme/git/build/perf/builtin-annotate.o] Error 1
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@localhost linux]$ gcc --version | head -1
gcc (GCC) 3.4.6 20060404 (Red Hat 3.4.6-11)
[acme@localhost linux]$
Fix it by renaming the parameter to evlist.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need the definiton for __always_inline in bitops.h to fix the build
on distros where it isn't available or compiler.h doesn't get included
indirectly.
One of the fixes needed to build perf on RHEL4 systems, for instance.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ARM's Thumb mode the bottom bit of the symbol address is set to mark
the function as Thumb; the instructions are in reality 2 or 4 byte on 2
byte alignments, and when the +1 address is used in annotate it causes
objdump to disassemble invalid instructions.
The patch removes that bottom bit during symbol loading.
Many thinks to Dave Martin for comments on an initial version of the
patch.
(For reference this corresponds to this bug
https://bugs.launchpad.net/linux-linaro/+bug/677547 )
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <20110121163922.GA31398@davesworkthinkpad>
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was broken by f006d25 that passed just the event name, not the complete
sys:event that it expected to open the /sys/.../sys/sys:event/id file to get
the id.
Fix it by moving it to after parse_events in cmd_record, as at that point
we can just traverse the evsel_list and use evsel->attr.config +
event_name(evsel) instead of re-opening the /id file.
Reported-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20110117202801.GG2085@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It wasn't accounting the ':' when consuming bytes in the the event
selector string, so parse_events() would fail in this test:
if (!(*str == 0 || *str == ',' || isspace(*str)))
return -1;
as *str would be pointing to '*', the last character in the '-e' arg in:
$ perf record -q -a -D -e sched:sched_* | perf script -i - -s perf-script.py
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this if statement:
if (head + event->header.size >= mmap_size) {
if (mmaps[map_idx]) {
munmap(mmaps[map_idx], mmap_size);
mmaps[map_idx] = NULL;
}
page_offset = page_size * (head / page_size);
file_offset += page_offset;
head -= page_offset;
goto remap;
}
With, for instance, these values:
head=2992
event->header.size=48
mmap_size=3040
We end up endlessly looping back to remap. Off by one.
Problem introduced in 55b4462.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: David Ahern <daahern@cisco.com>
Bisected-by: David Ahern <daahern@cisco.com>
Tested-by: David Ahern <daahern@cisco.com>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And a test for it:
[acme@felicio linux]$ perf test
1: vmlinux symtab matches kallsyms: Ok
2: detect open syscall event: Ok
3: detect open syscall event on all cpus: Ok
[acme@felicio linux]$
Translating C the test does:
1. generates different number of open syscalls on each CPU
by using sched_setaffinity
2. Verifies that the expected number of events is generated
on each CPU
It works as expected.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.
For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:
*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....
The tracepoints are separated by comma, something like this:
$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`
The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:
strncat(filename, orgname, strlen(orgname));
This patch fixes it by calling store_event_type() only when the event name has
been found.
LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like we do at __perf_session__process_events
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.
It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.
There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".
This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
builtin-timechart must only pass -e power:xy events if they are supported by
the running kernel, otherwise try to fetch the old power:power{start,end}
events.
For this I added the tiny helper function:
int is_valid_tracepoint(const char *event_string)
to parse-events.[hc], which could be more generic as an interface and support
hardware/software/... events, not only tracepoints, but someone else could
extend that if needed...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While writing the first user of the routines created from the ad-hoc
routines in the existing builtins I noticed that the resulting set of
calls was too long, reduce it by doing some best effort allocations.
Tools that need to operate on multiple threads and cpus should pre-allocate
enough resources by explicitely calling the perf_evsel__alloc_{fd,counters}
methods.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that later, we can pass the thread_map instance instead of
(thread_num, thread_map) for things like perf_evsel__open and friends,
just like was done with cpu_map.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map)
for things like perf_evsel__open and friends.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Abstracting away the loops needed to create the various event fd handlers.
The users have to pass a confiruged perf->evsel.attr field, which is already
usable after perf_evsel__new (constructor) time, using defaults.
Comes out of the ad-hoc routines in builtin-stat, that now uses it.
Fixed a small silly bug where we were die()ing before killing our
children, dysfunctional family this one 8-)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making them hopefully generic enough to be used in 'perf test',
well see.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not really something to be exported from session.c. Rename it to
'readn' as others did in the past.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of ad-hoc code and global arrays with hard coded sizes.
This is the first step on having a library that will be first
used on regression tests in the 'perf test' tool.
[acme@felicio linux]$ size /tmp/perf.before
text data bss dec hex filename
1273776 97384 5104416 6475576 62cf38 /tmp/perf.before
[acme@felicio linux]$ size /tmp/perf.new
text data bss dec hex filename
1275422 97416 1392416 2765254 2a31c6 /tmp/perf.new
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ipchain__fprintf_graph() casts the number of hits in a branch as an
int, which means we lose its highests bits.
This results in meaningless number of callchain hits in perf.data
that have a high number of hits recorded, typically those that have
callchain branches hits appearing more than INT_MAX. This happens
easily as those are pondered by the event period.
Reported-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
After adding probes, perf-probe(1) reports the probes locations which include
filenames for certain cases.
But for short file names (whose length < 32), perf-probe didn't display the
name correctly. It actually skipped the first character.
Here's an example where 'icmp.c' was screwed:
$ perf probe -n -a "icmp.c;sk=*"
Add new events:
probe:icmp_push_reply (on @cmp.c)
probe:icmp_reply (on @cmp.c)
probe:icmp_reply_1 (on @cmp.c)
probe:icmp_send (on @cmp.c)
probe:icmp_send_1 (on @cmp.c)
probe:icmp_error (on @cmp.c)
probe:icmp_error_1 (on @cmp.c)
probe:icmp_error_2 (on @cmp.c)
probe:icmp_error_3 (on @cmp.c)
This patch fixes this bug in synthesize_perf_probe_point().
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <m31v588r9k.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was introduced by commit fde52dbd7f.
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <m3y67hsr0m.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For kallsyms we don't have the symbol address end, so we do an extra pass and
set the symbol end addr as being the start of the next minus one.
But this was being done just after we filtered the symbols of a
particular type (functions, variables), so the symbol end was sometimes
after what it really is.
Fixing up symbol end also was falling apart when we have symbol aliases,
then the end address of all but the last alias was being set to be
before its start.
Fix it up by checking for symbol aliases and making the kallsyms__parse
routine use the next symbol, whatever its type, as the limit for the
previous symbol, passing that end address to the callback.
This was detected by the 'perf test' synthetic paranoid regression
tests, fix it up so that even that case doesn't mislead us.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the libdwfl library before 0.148 fails to analyze live kernel debuginfo,
'perf probe --list' compiled with those old libdwfl sometimes crashes.
To avoid that bug, perf probe does not use libdwfl's live kernel analysis
routine when it is compiled with older libdwfl.
Side effect: perf with older libdwfl doesn't support listing probe in modules
with source code line. Those could be shown by symbol+offset.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20101217131218.24123.62424.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When listing a whole file or a function which is located at the end,
perf-probe -L output wrongly: "Source file is shorter than expected.".
This is because show_one_line() always consider EOF as an error.
This patch fixes this by not considering EOF as an error when dumping
the trailing lines. Otherwise it's still an error and perf-probe still
outputs its warning.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1292854685-8230-6-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The actual file used by 'perf probe -L sched.c' is reported in the ouput
of the command.
But it's simply displayed as it has been given to the command (simply
sched.c) which is too ambiguous to be really usefull since several
sched.c files can be found into the same project and we also don't know
which search path has been used.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1292854685-8230-2-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new lines for error or debug messages, change dwarf related words to more
generic words (or just removed).
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20101217131211.24123.40437.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symfs argument allows analysis of perf.data file using a locally accessible
filesystem tree with debug symbols - e.g., tree created during image builds,
sshfs mount, loop mounted KVM disk images, USB keys, initrds, etc. Anything
with an OS tree can be analyzed from anywhere without the need to populate a
local data store with build-ids.
Commiter notes:
o Fixed up symfs="/" variants handling.
o prefixed DSO__ORIG_GUEST_KMODULE case with symfs too, avoiding use of files
outside the symfs directory.
LKML-Reference: <1291926427-28846-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we are running the new perf on an old kernel without support for
sample_id_all, we should fall back to the old unordered processing of
events. If we didn't than we would *always* process events without
timestamps out of order, whether or not we hit a reordering race. In
other words, instead of there being a chance of not attributing samples
correctly, we would guarantee that samples would not be attributed.
While processing all events without timestamps before events with
timestamps may seem like an intuitive solution, it falls down as
PERF_RECORD_EXIT events would also be processed before any samples.
Even with a workaround for that case, samples before/after an exec would
not be attributed correctly.
This patch allows commands to indicate whether they need to fall back to
unordered processing, so that commands that do not care about timestamps
on every event will not be affected. If we do fallback, this will print
out a warning if report -D was invoked.
This patch adds the test in perf_session__new so that we only need to
test once per session. Commands that do not use an event_ops (such as
record and top) can simply pass NULL in it's place.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291951882-sup-6069@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was broken since link(2) doesn't dereference symbolic
links. Instead 'filename' becomes a symbolic link to the same file
that 'name' refers to.
This had the bad effect to create dangling symlinks in the case that
even can't be removed with perf-buildid-cache(1).
LKML-Reference: <m38vzxxrql.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fail if the kernel image contains no symbol, allowing using other images
in the vmlinux search path that may have a usable symtab.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Francis Moreau <francis.moro@gmail.com>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LPU-Reference: <m3d3p9ydx9.fsf_-_@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Users were not being able to have the explicitely specified vmlinux
pathname used, instead a search on the vmlinux path was always being
made.
Reported-by: Francis Moreau <francis.moro@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Francis Moreau <francis.moro@gmail.com>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LPU-Reference: <m3hbelydz8.fsf_-_@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we check at the beginning of the callers, no need to ask if
dump_trace is set multiple times.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dump code used by perf report -D is scattered all over the place.
Move it to separate functions.
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101207124550.625434869@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the event has no timestamp assigned then the parse code sets it to
~0ULL which causes the ordering code to enqueue it at the end.
Process it right away.
Reported-by: Ian Munsie <imunsie@au1.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101207124550.528788441@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
event__name[] is missing an entry for PERF_RECORD_FINISHED_ROUND, but we
happily access the array from the dump code.
Make event__name[] static and provide an accessor function, fix up all
callers and add the missing string.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101207124550.432593943@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful for analyzing a perf data file on a different system than
the one data was collected on and still include symbols from loaded
kernel modules in the output.
Commiter note: Updated the man page accordingly.
LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were a few stray calloc()'s and malloc()'s which were not having
their return values checked for success.
As the calling code either already coped with failure or didn't actually
care we just return -ENOMEM at that point.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Chris Samuel <chris@csamuel.org>
LKML-Reference: <4CDDF95A.1050400@csamuel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have timestamps on FORK, EXIT, COMM, MMAP events we can
sort everything in time order. This fixes the following observed
problem:
mmap(file1) -> pagefault() -> munmap(file1)
mmap(file2) -> pagefault() -> munmap(file2)
Resulted in decoding both pagefaults in file2 because the file1 map
was already replaced by the file2 map when the map address was
identical.
With all events sorted we decode both pagefaults correctly.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <alpine.LFD.2.00.1012051220450.2653@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new macro OPT_CALLBACK_DEFAULT_NOOPT for parse_options.
It enables to pass the default value (opt->defval) to the callback function
processing options require no argument.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101203035853.7827.17502.stgit@localhost6.localdomain6>
Signed-off-by: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the event that a DSO has not been identified, just print out [unknown]
instead of the instruction pointer as we previously were doing, which is pretty
meaningless for a shared object (at least to the users perspective).
The IP we print out is fairly meaningless in general anyway - it's just one
(the first) of the many addresses that were lumped together as unidentified,
and could span many shared objects and symbols. In reality if we see this
[unknown] output then the report -D output is going to be more useful anyway as
we can see all the different address that it represents.
If we are printing the symbols we are still going to see this IP in that column
anyway since they shouldn't resolve either.
This patch also changes the symbol address printouts so that they print out 0x
before the address, are left aligned, and changes the %L format string (which
relies on a glibc bug) to %ll.
Before:
74.11% :3259 4a6c [k] 4a6c
After:
74.11% :3259 [unknown] [k] 0x4a6c
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291603026-11785-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge reason: This is an older commit under testing that was not pushed yet - merge it.
Also fix up the merge in command-list.txt.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
There are number of issues that prevent the use of multiple tracepoint events
being specified in a -e/--event switch, separated by commas.
For example, perf stat -e irq:irq_handler_entry,irq:irq_handler_exit ... fails
because the tracepoint event parsing code doesn't recognize the comma separator
properly.
This patch corrects those issues.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Michael Ellerman <michaele@au1.ibm.com>
LKML-Reference: <1291156021-17711-1-git-send-email-cjashfor@linux.vnet.ibm.com>
Signed-off-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to check that many times if debug_trace is on.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ordered sample code allocates singular reference objects struct
sample_queue which have 48byte size on 64bit and 20 bytes on 32bit. That's
silly. Allocate ~64k sized chunks and hand them out.
Performance gain: ~ 15%
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.398713983@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the sample queue is flushed we free the sample reference objects. Though
we need to malloc new objects when we process further. Stop the malloc/free
orgy and cache the already allocated object for resuage. Only allocate when
the cache is empty.
Performance gain: ~ 10%
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.338488630@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Profiling perf with perf revealed that a large part of the processing time is
spent in malloc/memcpy/free in the sample ordering code. That code copies the
data from the mmap into malloc'ed memory. That's silly. We can keep the mmap
and just store the pointer in the queuing data structure. For 64 bit this is
not a problem as we map the whole file anyway. On 32bit we keep 8 maps around
and unmap the oldest before mmaping the next chunk of the file.
Performance gain: 2.95s -> 1.23s (Faktor 2.4)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.278787719@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On 64bit we can map the whole file in one go, on 32bit we can at least map
32MB and not map/unmap tiny chunks of the file.
Base the progress bar on 1/16 of the data size.
Preparatory patch to get rid of the malloc/memcpy/free of trace data.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.213687773@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to check twice.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.152886642@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The progress bar is changed when the file offset changes. This happens only
when the next mmap is done. No need to call ui_progress_update() for every
event.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.094836523@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace the pseudo C++ self argument with session and give the mmap related
variables a sensible name. shift is a complete misnomer - it took me several
rounds of cursing to figure out that it's not a shift value.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163820.029687218@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no reason to use a struct sample_event pointer in struct sample_queue
and type cast it when flushing the queue.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163819.969462809@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The homebrewn sort algorithm fails to sort in time order. One of the problem
spots is that it fails to deal with equal timestamps correctly.
My first gut reaction was to replace the fancy list with an rbtree, but the
performance is 3 times worse.
Rewrite it so it works.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101130163819.908482530@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This primarily fixes perf-report, which didn't report the correct type
of event if perf-record was called to record one event different from
'cycles':
$ perf record -e instructions true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB perf.data (~295 samples) ]
$ perf report | head -n1
# Events: 7 cycles
LPU-Reference: <m3mxor6nex.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
On ARM, module symbol start address is ahead of kernel symbol start address, so
we can't suppose that the start address of kernel map always is zero, otherwise
may cause incorrect .start and .end of kernel map (caused by fixup) when there
are modules loaded, then map_groups__find may return incorrect map for symbol
query.
This patch always figures out the start address of kernel map from
/proc/kallsyms if the file is available, so fix the issues on ARM for module
loaded case.
This patch fixes the following issues on ARM when modules are loaded:
- vmlinux symbol can't be found by kallsyms maps doing 'perf test'
- module symbols are parsed mistakenlly when doing 'perf top'/'perf report'
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101125192725.62d31b42@tom-lei>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM, module addresss space is ahead of kernel space, so the module
symbols are handled before kernel symbol in dso__split_kallsyms, then
was causing one map to be created for each kernel symbol.
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101124144540.GB15875@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix it by explaining what can be happening and giving the number of processed
and lost events.
Also holler if unknown events were found, that can be due to processing a
perf.data file collected using a newer tool where newer events got added on
reporting using an older perf tool, that or a bug, so ask for a report to be
made.
Works on both --tui and --stdio.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a 32bit userspace perf is running on a 64bit kernel, the end of the final
map in the kernel would incorrectly be set to 2^32-1 rather than 2^64-1.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290658375-10342-1-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tool developers have to fill in a 'perf_event_ops' method table to
specify how to handle each event, so far the ones that were not
explicitely especified would get a stub that would just discard the
event.
Change that so that tool developers can get the lost event details and
the total number of such events at the end of 'perf report -D' output.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Collecting build-ids for long running sessions may take a long time
because it needs to traverse the whole just collected perf.data stream
of events, marking the DSOs that had hits and then looking for the
.note.gnu.build-id ELF section.
For things like the 'trace' tool that records and right away consumes
the data on systems where its unlikely that the DSOs being monitored
will change while 'trace' runs, it is desirable to remove build id
collection, so add a -B/--no-buildid option to perf record to allow such
use case.
Longer term we'll avoid all this if we, at DSO load time, in the kernel,
take advantage of this slow code path to collect the build-id and stash
it somewhere, so that we can insert it in the PERF_RECORD_MMAP event.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch ports arch/x86/lib/memcpy_64.S to perf bench mem
memcpy for benchmarking memcpy() in userland with tricky and
dirty way.
util/include/asm/cpufeature.h, util/include/asm/dwarf2.h, and
util/include/linux/linkage.h are mostly dummy files with small
wrappers, so that we are able to include memcpy_64.S
unmodified.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: h.mitake@gmail.com
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ma Ling <ling.ma@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1290668693-27068-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At least on ARM, padding is inserted between rb_node and sym in struct
symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
point inside rb_node rather than to the symbol_name_rb_node. Fix this
by converting the code to use container_of().
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101123163106.GA25677@debian>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This change removes the use of hardcoded absolute "/usr/include/elfutils" paths
from the perf build. The problem with hardcoded paths is that it prevents them
from being overridden by $prefix or by -I in CFLAGS (e.g., for cross-compiling
purposes).
Instead, just include the "elfutils/" subdirectory as a relative path when
files are needed from that directory.
Tested by building perf:
- Cross-compiled for ARM on x86_64
- Built natively on x86_64
- Built on x86_64 with /usr/include/elfutils moved to another location
and manually included in CFLAGS
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1289945793-31441-1-git-send-email-rmorell@nvidia.com>
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Free the perf trace name space and rename the trace to 'script' which is a
better match for the scripting engine.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The gcc complains about small auto-var strings being allocated from stack space.
Make them const to avoid this:
| CC util/ui/util.o
| cc1: warnings being treated as errors
| util/ui/util.c: In function ‘ui__dialog_yesno’:
| util/ui/util.c:108: error: not protecting function: no buffer at least 8 bytes long
| make: *** [util/ui/util.o] Error 1
The real bug is in the newtWinChoice() ABI - but that's an
externality we cannot fix here, so we use this workaround.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20101106084724.GA5956@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We want just the script output, not internal details about the record phase.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing the following error on 32-bit arches:
util/probe-finder.c: In function ‘line_range_search_cb’:
util/probe-finder.c:1734: error: format ‘%lx’ expects type ‘long
unsigned int’, but argument 3 has type ‘Dwarf_Off’
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We wrap it in libslang.h because we need to deal with older slang release
where HAVE_LONG_LONG is referenced as:
So we need to define it.
Noticed when rebuilding the perf tools on a RHEL5 machine.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic module probe support on perf probe. This introduces "--module
<MODNAME>" option to perf probe for putting probes and showing lines and
variables in the given module.
Currently, this supports only probing on running modules. Supporting off-line
module probing is the next step.
e.g.)
[show lines]
# ./perf probe --module drm -L drm_vblank_info
<drm_vblank_info:0>
0 int drm_vblank_info(struct seq_file *m, void *data)
1 {
struct drm_info_node *node = (struct drm_info_node *) m->private
3 struct drm_device *dev = node->minor->dev;
...
[show vars]
# ./perf probe --module drm -V drm_vblank_info:3
Available variables at drm_vblank_info:3
@<drm_vblank_info+20>
(unknown_type) data
struct drm_info_node* node
struct seq_file* m
[put a probe]
# ./perf probe --module drm drm_vblank_info:3 node m
Add new event:
probe:drm_vblank_info (on drm_vblank_info:3 with node m)
You can now use it on all perf tools, such as:
perf record -e probe:drm_vblank_info -aR sleep 1
[list probes]
# ./perf probe -l
probe:drm_vblank_info (on drm_vblank_info:3@drivers/gpu/drm/drm_info.c with ...
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101341.3542.71638.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --externs for allowing --vars to show accessible global (externally
defined) variables from a given probe point too.
This will give you a hint which globals can be accessible from the probe point.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101335.3542.31003.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just change the order of function arguments for ease of read; moving optional
bool flag to the last.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101329.3542.51200.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -V (--vars) option for listing accessible local variables at given probe
point. This will help finding which local variables are available for event
arguments.
e.g.)
# perf probe -V call_timer_fn:23
Available variables at call_timer_fn:23
@<run_timer_softirq+345>
function_type* fn
int preempt_count
long unsigned int data
struct list_head work_list
struct list_head* head
struct timer_list* timer
struct tvec_base* base
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101323.3542.40282.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow users to set external defined global variables as event arguments (e.g.
jiffies).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20101021101316.3542.1999.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to check the die's address and search into the die only if it has given
address.
This will avoid finding wrong variables in wrong basic block.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20101021101309.3542.46434.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to get the actual type die of variables by using dwarf_attr_integrate()
which gets attribute from die even if the type die is connected by
DW_AT_abstract_origin.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20101021101302.3542.38549.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Conflicts:
tools/perf/util/ui/browsers/hists.c
Merge reason: fix the conflict and merge in changes for dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Both python_scripting_ops and perl_scripting_ops have two global definitions.
One in trace-event-scripting.c and one in their respective scripting-engine
modules.
The issue is that depending on the linker order one definition or the other
is chosen. One is uninitialized (bss), while the other is initialized. If
the uninitialized version is chosen, then perf does not function properly.
This patch fixes this by adding the extern prefix to the definitions in
trace-event-scripting.c.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4c97e41a.078fd80a.7a8b.3cc9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There a typo in util/ui/browsers/hists.c that leads to a segfault when you
press the 'a' key on a non-resolved symbol (plain hex address).
LKML-Reference: <20100923201901.GE31726@gambetta>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are useless and take away precious columns and lines, so stop using
windows.
One more step in removing newt code, that after all is not being useful
at all for the coalescing TUI model in perf.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100822082003.GB7365@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By returning immediately if it was already initialized, do it as well at
symbol__exit, refusing multiple deinitializations.
This fixes problems in the kmem, sched and timechart commands.
Reported-by: Davidlohr Bueso <dave@gnu.org>
Cc: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
LKML-Reference: AANLkTi=9Cn=R8SPMCRp5z+gEjXbaBHeb-AaOtRbuwwcn@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't make argument names from raw parameters (means the parameters are written
in kprobe-tracer syntax), because the argument syntax may include special
characters. Just leave it, then kprobe-tracer gives a new name.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100827113859.22882.75598.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a bug to support %return probe syntax again. Previous commit 4235b04 has a
bug which disables the %return syntax on perf probe.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100827113852.22882.87447.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Each histogram entry has a callchain root that stores the
callchain samples. However we forgot to initialize the
tracking of children hits of these roots, which then got
random values on their creation.
The root children hits is multiplied by the minimum percentage
of hits provided by the user, and the result becomes the minimum
hits expected from children branches. If the random value due
to the uninitialization is big enough, then this minimum number
of hits can be huge and eventually filter every children branches.
The end result was invisible callchains. All we need to
fix this is to initialize the children hits of the root.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: 2.6.32.x-2.6.35.y <stable@kernel.org>
Given a dso, list the symbols in ascending name order. Needed for
listing available symbols from perf probe.
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Naren A Devaiah <naren.devaiah@in.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100825134329.5447.92261.sendpatchset@localhost6.localdomain6>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When looking at a callchains enabled perf data file one can find it
tiresome to start with all callchains collapsed and then to have to go
one by one expanding them.
So associate 'E' with "Expand all callchains" and 'C' with "Collapse all
callchains".
This way now one can have the top level view and then switch to/from
having all callchains expanded.
More work is needed to allow expanding just from one branch down to its
leaves.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not everytime we show the callchains, removing duplicated initialization
of this field.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its way too stupid to use rb_first() for just caching if there are
children, use the cheaper RB_EMPTY_ROOT() instead.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It wasn't setting the ms.has_children for the hist_entry itself, just
for the callchain
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we sort the histograms by comm, which is the default,
we need to merge some of them, typically different thread
histograms of a same process, or just same comm. But during
this merge, we forgot to merge callchains.
So imagine we have three threads (tids: 1000, 1001, 1002) that
belong to comm "foo".
tid 1000 got 100 events
tid 1001 got 10 events
tid 1002 got 3 events
Once we merge these histograms to get a per comm result, we'll
finally get:
"foo" got 113 events
The problem is if we merge 1000 and 1001 histograms into 1002, then
the end merge result, wrt callchains, will be only callchains that
belong to 1002.
This is because we haven't handled callchains in the merge. Only those
from one of the threads inside a common comm survive.
It means during this merge, we can lose a lot of callchains.
Fix this by implementing callchains merge and apply it on histograms
that collapse.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Do that to start a consistant callchain API namespace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@infradead.org>
In order to implement callchains collapsing, we need to keep
track of the maximum depth in a histogram tree of callchains.
This way we'll avoid allocating an arbitrary temporary buffer
size on callchain merge time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@infradead.org>
Some Linux distributions like ALT Linux provides patched glibc with
contains strlcpy(). It's confilcts with strlcpy() from perf.
Let's add check for strlcpy().
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1282351101-8879-1-git-send-email-kirill@shutemov.name>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes the usual idiom for specifying a series of key codes to exit
ui_browser__run() for specialized processing (search, annotate, etc) or
plain exiting the browser more compact.
It also abstracts away some more libnewt operations. At some point we'll
also replace NEWT_KEY_foo with something that can be mapped to NEWT or,
say, gtk.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make all browsers return the exit key uniformly and remove the
newtExitStruct parameter, removing one more newt specific thing from the
ui API.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Browsers don't have to deal with absolute coordinates, just using (row,
column) and leaving the rest to ui_browser is better and removes one
more UI backend detail from the browsers.
Also shorten the percent_color setting idiom, removing some more direct
libslang calls.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As part of ongoing effort to reduce the coupling with libnewt, browsers
are being changed to return the exit key.
The annotate browser is not returning it as expected by builtin-annotate
when annotating multiple symbols (when 'perf annotate' is called without
specifying a symbol name).
Fix it by returning the exit key and also adding the RIGHT key as a exit
key so that going to the next symbol in the TUI can work again.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit:
de5d9bf: Move list types from <linux/list.h> to <linux/types.h>.
Moved the list head data types out of list.h, breaking the build.
Add them to the perf types.h as well.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To match what is shown when '?' or 'H' is pressed, i.e. the keybind help
window.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
