Add clues about what the SMALL and SPECIAL flags do.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reducing the size of struct printf_spec is a good thing because multiple
instances are commonly passed on stack.
It's possible for type to be u8 and field_width to be s8, but this is
likely small enough for now.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This should allow the removal of the #defines and uses
of NIPQUAD and NIPQUAD_FMT
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: Josip Rodin <joy@entuzijast.net>
Cc: Joe Perches <joe@perches.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Mon, 2010-01-04 at 23:43 +0000, Maciej W. Rozycki wrote:
> The example below shows an address, and the sequence of bits or symbols
> that would be transmitted when the address is used in the Source Address
> or Destination Address fields on the MAC header. The transmission line
> shows the address bits in the order transmitted, from left to right. For
> IEEE 802 LANs these correspond to actual bits on the medium. The FDDI
> symbols line shows how the FDDI PHY sends the address bits as encoded
> symbols.
>
> MSB: 35:7B:12:00:00:01
> Canonical: AC-DE-48-00-00-80
> Transmission: 00110101 01111011 00010010 00000000 00000000 00000001
> FDDI Symbols: 35 7B 12 00 00 01"
>
> Please note that this address has its group bit clear.
>
> This notation is also defined in the "FDDI MEDIA ACCESS CONTROL-2
> (MAC-2)" (X3T9/92-120) document although that book does not have a need
> to use the MSB form and it's skipped.
Adds 6 bytes to object size for x86
New:
$ size lib/vsprintf.o
text data bss dec hex filename
8664 0 2 8666 21da lib/vsprintf.o
$ size lib/vsprintf.o
text data bss dec hex filename
8658 0 2 8660 21d4 lib/vsprintf.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These were added in
9ac6e44 (lib/vsprintf.c: add %pU to print UUID/GUIDs)
c7dabef (vsprintf: use %pR, %pr instead of %pRt, %pRf)
8a27f7c (lib/vsprintf.c: Add "%pI6c" - print pointer as compressed ipv6 address)
4aa9960 (printk: add %I4, %I6, %i4, %i6 format specifiers)
dd45c9c (printk: add %pM format specifier for MAC addresses)
but only added comments to pointer() not vsnprintf() that is refered to by
printk's comments.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joe Perches <joe@perches.com>
Cc: Jens Rosenboom <jens@mcbone.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UUID/GUIDs are somewhat common in kernel source.
Standardize the printed style of UUID/GUIDs by using
another extension to %p.
%pUb: 01020304-0506-0708-090a-0b0c0d0e0f10
%pUB: 01020304-0506-0708-090A-0B0C0D0E0F10 (upper case)
%pUl: 04030201-0605-0807-090a-0b0c0d0e0f10
%pUL: 04030201-0605-0807-090A-0B0C0D0E0F10 (upper case)
%pU defaults to %pUb
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.
It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
text data bss dec hex filename
64688 584 592 65864 10148 (TOTALS-BEFORE)
64641 584 592 65817 10119 (TOTALS-AFTER)
Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".
Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
drivers/leds/led-class.c
drivers/leds/ledtrig-timer.c
drivers/video/output.c
@@
expression str;
@@
( // ignore skip_spaces cases
while (*str && isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The difference between simple_strtoul() and simple_strtoull() is just
the size of the variable used to keep track of the sum of characters
converted to numbers:
unsigned long simple_strtoul() {...}
unsigned long long simple_strtoull(){...}
Both are same size on my Core 2/gcc 4.4.1.
Overflow condition is not checked on both functions, so an extremely large
string can break these functions so that they don't even notice it.
As we do not care for overflowing on these functions, always keep the sum
using the larger variable around (unsigned long long) on simple_strtoull()
and cast it to (unsigned long) on simple_strtoul(), which then becomes
just a wrapper around simple_strtoull().
Code size decreases by 304 bytes:
text data bss dec hex filename
15534 0 8 15542 3cb6 vsprintf.o (ex lib/lib.a-BEFORE)
15230 0 8 15238 3b86 vsprintf.o (ex lib/lib.a-AFTER)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When converting more caller sites, the inline decision will be left up to gcc.
It decreases code size:
text data bss dec hex filename
15710 0 8 15718 3d66 vsprintf.o (ex lib/lib.a-BEFORE)
15534 0 8 15542 3cb6 vsprintf.o (ex lib/lib.a-AFTER)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup by moving variables closer to the scope where they're used in fact.
Also, remove unneeded ones.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional change, just refactor the code so that it avoid checking
"if (hi)" two times in a sequence, taking advantage of previous check made.
It also reduces code size:
text data bss dec hex filename
15726 0 8 15734 3d76 vsprintf.o (ex lib/lib.a-BEFORE)
15710 0 8 15718 3d66 vsprintf.o (ex lib/lib.a-AFTER)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It decreases code size as well:
text data bss dec hex filename
15758 0 8 15766 3d96 vsprintf.o (ex lib/lib.a-BEFORE)
15726 0 8 15734 3d76 vsprintf.o (ex lib/lib.a-TOLOWER)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most relevant complaints were addressed.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset reduces lib/lib.a code size by 482 bytes on my Core 2 with
gcc 4.4.1 even considering that it exports a newly defined function
skip_spaces() to drivers:
text data bss dec hex filename
64867 840 592 66299 102fb (TOTALS-lib.a-BEFORE)
64641 584 592 65817 10119 (TOTALS-lib.a-AFTER)
and implements some code tidy up.
Besides reducing lib.a size, it converts many in-tree drivers to use the
newly defined function, which makes another small reduction on kernel size
overall when those drivers are used.
This patch:
Change "<NULL>" to "(null)", unifying 3 equal strings.
glibc also uses "(null)" for the same purpose.
It decreases code size by 7 bytes:
text data bss dec hex filename
15765 0 8 15773 3d9d vsprintf.o (ex lib/lib.a-BEFORE)
15758 0 8 15766 3d96 vsprintf.o (ex lib/lib.a-AFTER)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesse accidentally applied v1 [1] of the patchset instead of v2 [2]. This
is the diff between v1 and v2.
The changes in this patch are:
- tidied vsprintf stack buffer to shrink and compute size more
accurately
- use %pR for decoding and %pr for "raw" (with type and flags) instead
of adding %pRt and %pRf
[1] http://lkml.org/lkml/2009/10/6/491
[2] http://lkml.org/lkml/2009/10/13/441
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This adds support for printing struct resource type and flag information.
For example, "%pRt" looks like "[mem 0x80080000000-0x8008001ffff 64bit pref]",
and "%pRf" looks like "[mem 0xff5e2000-0xff5e2007 pref flags 0x1]".
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Print addresses (IO port numbers and memory addresses) in hex, but print
others (IRQs and DMA channels) in decimal. Only print the end if it's
different from the start.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The leading "0x" consumes field width, so leave space for it in addition to
the 4 or 8 hex digits. This means we'll print "0x0000-0x01df" rather than
"0x00-0x1df", for example.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
When using %*s, sscanf should honor conversion specifiers immediately
following the %*s. For example, the following code should find the
position of the end of the string "hello".
int end;
char buf[] = "hello world";
sscanf(buf, "%*s%n", &end);
printf("%d\n", end);
Ideally, sscanf would advance the fmt and str pointers the same as it
would without the *, but the code for that is rather complicated and is
not included in the patch.
Signed-off-by: Andy Spencer <andy753421@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Rosenboom noticed that a possibly unaligned const char*
is cast to a const struct in6_addr *.
Avoid this at the cost of a struct in6_addr copy on the stack.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the duplicate comment of bstr_printf that is the same as the
vsnprintf.
Add the 's' option to the comment for the pointer function. This is
more of an internal function so the little duplication of the comment
here is OK.
Reported-by: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On PowerPC64 function pointers do not point directly at the functions,
but instead point to pointers to the functions. The output of %pF expects
to point to a pointer to the function, whereas %pS will show the function
itself.
mcount returns the direct pointer to the function and not the pointer to
the pointer. Thus %pS must be used to show this. The function tracer
requires printing of the functions without offsets and uses the %pf
instead.
%pF produces run_local_timers+0x4/0x1f
%pf produces just run_local_timers
For PowerPC64, we need to use the direct pointer, and we only have
%pS which will produce .run_local_timers+0x4/0x1f
This patch creates a %ps that matches the %pf as %pS matches %pF.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A printf format specifier which would allow us to print a pure
function name has been suggested by Andrew Morton a couple of
months ago.
The current %pF is very convenient to print a function symbol,
but often we only want to print the name of the function, without
its asm offset.
That's what %pf does in this patch. The lowecase f has been chosen
for its intuitive meaning of a 'weak kind of %pF'.
The support for this new format would be welcome by the tracing code
where the need to print pure function names is often needed. This is
also true for other parts of the kernel:
$ git-grep -E "kallsyms_lookup\(.+?\)"
arch/blackfin/kernel/traps.c: symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
arch/powerpc/xmon/xmon.c: name = kallsyms_lookup(pc, &size, &offset, NULL, tmpstr);
arch/sh/kernel/cpu/sh5/unwind.c: sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf);
arch/x86/kernel/ftrace.c: kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);
kernel/kprobes.c: sym = kallsyms_lookup((unsigned long)p->addr, NULL,
kernel/lockdep.c: return kallsyms_lookup((unsigned long)key, NULL, NULL, NULL, str);
kernel/trace/ftrace.c: kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
kernel/trace/ftrace.c: kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
kernel/trace/ftrace.c: kallsyms_lookup((unsigned long)rec->ops->func, NULL, NULL, NULL, str);
kernel/trace/ftrace.c: kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
kernel/trace/ftrace.c: kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
kernel/trace/ftrace.c: kallsyms_lookup(rec->ip, NULL, NULL, &modname, str);
kernel/trace/ftrace.c: kallsyms_lookup(*ptr, NULL, NULL, NULL, str);
kernel/trace/trace_functions.c: kallsyms_lookup(ip, NULL, NULL, NULL, str);
kernel/trace/trace_output.c: kallsyms_lookup(address, NULL, NULL, NULL, str);
Changes in v2:
- Add the explanation of the %pf role for vsnprintf() and bstr_printf()
- Change the comments by dropping the "asm offset" notion and only
define the %pf against the actual function offset notion.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090415154817.GC5989@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature, extend vsprintf format strings
hh is used as length modifier for signed char or unsigned char.
It is supported by glibc, we add kernel support now.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: torvalds@linux-foundation.org
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49CC9739.30107@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jeremy Fitzhardinge reported:
> Change fef20d9c13, "vsprintf:
> unify the format decoding layer for its 3 users", causes a
> regression in xenbus which results in no devices getting
> attached to a new domain.
%.*s is broken - fix it.
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sitsofe Wheeler found and bisected that while unifying the
vsprintf format decoding in:
fef20d9: vsprintf: unify the format decoding layer for its 3 users
The sign flag has been dropped out in favour of
precise types (ie: LONG/ULONG).
But the format helper number() still needs this flag to keep track of
the signedness unless it will consider all numbers as unsigned.
Also add an explicit cast to int (for %d) while parsing with va_arg()
to ensure the highest bit is well extended on the 64 bits number that
hosts the value in case of negative values.
Reported-Bisected-Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090309201503.GA5010@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
An new optimization is making its way to ftrace. Its purpose is to
make trace_printk() consuming less memory and be faster.
Written by Lai Jiangshan, the approach is to delay the formatting
job from tracing time to output time.
Currently, a call to trace_printk() will format the whole string and
insert it into the ring buffer. Then you can read it on /debug/tracing/trace
file.
The new implementation stores the address of the format string and
the binary parameters into the ring buffer, making the packet more compact
and faster to insert.
Later, when the user exports the traces, the format string is retrieved
with the binary parameters and the formatting job is eventually done.
The new implementation rewrites a lot of format decoding bits from
vsnprintf() function, making now 3 differents functions to maintain
in their duplicated parts of printf format decoding bits.
Suggested by Ingo Molnar, this patch tries to factorize the most
possible common bits from these functions.
The real common part between them is the format decoding. Although
they do somewhat similar jobs, their way to export or import the parameters
is very different. Thus, only the decoding layer is extracted, unless you see
other parts that could be worth factorized.
Changes in V2:
- Address a suggestion from Linus to group the format_decode() parameters inside
a structure.
Changes in v3:
- Address other cleanups suggested by Ingo and Linus such as passing the
printf_spec struct to the format helpers: pointer()/number()/string()
Note that this struct is passed by copy and not by address. This is to
avoid side effects because these functions often change these values and the
changes shoudn't be persistant when a callee helper returns.
It would be too risky.
- Various cleanups (code alignement, switch/case instead of if/else fountains).
- Fix a bug that printed the first format specifier following a %p
Changes in v4:
- drop unapropriate const qualifier loss while casting fmt to a char *
(thanks to Vegard Nossum for having pointed this out).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new APIs for binary trace printk infrastructure
vbin_printf(): write args to binary buffer, string is copied
when "%s" is occurred.
bstr_printf(): read from binary buffer for args and format a string
[fweisbec@gmail.com: rebase]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1236356510-8381-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It decodes "\n" as 0, which is bad, because stray echo into backlight
will turn your backlight off, etc...
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before, when we only ever printed out the pointer value itself, a NULL
pointer would never cause issues and might as well be printed out as
just its numeric value.
However, with the extended %p formats, especially %pR, we might validly
want to print out resources for debugging. And sometimes they don't
even exist, and the resource pointer is just NULL. Print it out as
such, rather than oopsing.
This is a more generic version of a patch done by Trent Piepho (catching
all %p cases rather than just %pR, and using "(null)" instead of
"[NULL]" to match glibc).
Requested-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add %pm to omit the colons when printing a mac address.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
put_dec_trunc prints the digits in reverse order and is reversed
inside number(). Continue using put_dec_trunc, but reverse each quad
in ip4_addr_string.
[Noticed by Julius Volz]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For use in printing IPv4, or IPv6 addresses in the usual way:
%i4 and %I4 are currently equivalent and print the address in
dot-separated decimal x.x.x.x
%I6 prints 16-bit network order hex with colon separators:
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
%i6 omits the colons.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takes a pointer to a IPv6 address and formats it in the usual
colon-separated hex format:
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
Each 16 bit word is printed in network-endian byteorder.
%#p6 is also supported and will omit the colons.
%p6 is a replacement for NIP6_FMT and NIP6()
%#p6 is a replacement for NIP6_SEQFMT and NIP6()
Note that NIP6() took a struct in6_addr whereas this takes a pointer
to a struct in6_addr.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add format specifiers for printing out six colon-separated bytes:
MAC addresses (%pM):
xx:xx:xx:xx:xx:xx
%#pM is also supported and omits the colon separators.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a %pR option to the kernel vsnprintf that prints the range of
addresses inside a struct resource passed by pointer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Open-code them rather than using defining macros. The function bodies are now
next to their kerneldoc comments as a bonus.
Add casts to the signed cases as they call into the unsigned versions.
Avoids the sparse warnings:
lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:249:1: expected unsigned long *res
lib/vsprintf.c:249:1: got long *res
lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:249:1: expected unsigned long *res
lib/vsprintf.c:249:1: got long *res
lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:251:1: expected unsigned long long *res
lib/vsprintf.c:251:1: got long long *res
lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:251:1: expected unsigned long long *res
lib/vsprintf.c:251:1: got long long *res
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove extra lines before the EXPORT_SYMBOL()s
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The default base is 10 unless there is a leading zero, in which
case the base will be guessed as 8.
The base will only be guesed as 16 when the string starts with '0x'
the third character is a valid hex digit.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add documentation in kerneldoc for new printk format extensions
This patch documents the new %pS/%pF options in printk in kernel doc.
Hope I didn't miss any other extension.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was introduced by "vsprintf: add support for '%pS' and '%pF' pointer
formats" in commit 0fe1ef24f7. However,
the current way its coded doesn't work on parisc64. For two reasons: 1)
parisc isn't in the #ifdef and 2) parisc has a different format for
function descriptors
Make dereference_function_descriptor() more accommodating by allowing
architecture overrides. I put the three overrides (for parisc64, ppc64
and ia64) in arch/kernel/module.c because that's where the kernel
internal linker which knows how to deal with function descriptors sits.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix wrong conversion function used by strict_strtou*
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Reported-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They print out a pointer in symbolic format, if possible (ie using
symbolic KALLSYMS information). The '%pS' format is for regular direct
pointers (which can point to data or code and that you find on the stack
during backtraces etc), while '%pF' is for C function pointer types.
On most architectures, the two mean exactly the same thing, but some
architectures use an indirect pointer for C function pointers, where the
function pointer points to a function descriptor (which in turn contains
the actual pointer to the code). The '%pF' code automatically does the
appropriate function descriptor dereference on such architectures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This expands the kernel '%p' handling with an arbitrary alphanumberic
specifier extension string immediately following the '%p'. Right now
it's just being ignored, but the next commit will start adding some
specific pointer type extensions.
NOTE! The reason the extension is appended to the '%p' is to allow
minimal gcc type checking: gcc will still see the '%p' and will check
that the argument passed in is indeed a pointer, and yet will not
complain about the extended information that gcc doesn't understand
about (on the other hand, it also won't actually check that the pointer
type and the extension are compatible).
Alphanumeric characters were chosen because there is no sane existing
use for a string format with a hex pointer representation immediately
followed by alphanumerics (which is what such a format string would have
traditionally resulted in).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The actual code is the same, just split out into a helper function.
This makes it easier to read, and allows for simple future extension
of %p handling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The actual code is the same, just split out into a helper function.
This makes it easier to read, and allows for future sharing of the
string code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lib/vsprintf.c: Fix bug omitting minus sign of numbers (module_param)
Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Cc: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In arch/x86/boot/printf.c gets rid of unused tail of digits: const char
*digits = "0123456789abcdefghijklmnopqrstuvwxyz"; (we are using 0-9a-f
only)
Uses smaller/faster lowercasing (by ORing with 0x20)
if we know that we work on numbers/digits. Makes
strtoul smaller, and also we are getting rid of
static const char small_digits[] = "0123456789abcdefx";
static const char large_digits[] = "0123456789ABCDEFX";
since this works equally well:
static const char digits[16] = "0123456789ABCDEF";
Size savings:
$ size vmlinux.org vmlinux
text data bss dec hex filename
877320 112252 90112 1079684 107984 vmlinux.org
877048 112252 90112 1079412 107874 vmlinux
It may be also a tiny bit faster because code has less
branches now, but I doubt it is measurable.
[ hugh@veritas.com: uppercase pointers fix ]
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently, for every sysfs node, the callers will be responsible for
implementing store operation, so many many callers are doing duplicate
things to validate input, they have the same mistakes because they are
calling simple_strtol/ul/ll/uul, especially for module params, they are
just numeric, but you can echo such values as 0x1234xxx, 07777888 and
1234aaa, for these cases, module params store operation just ignores
succesive invalid char and converts prefix part to a numeric although input
is acctually invalid.
This patch tries to fix the aforementioned issues and implements
strict_strtox serial functions, kernel/params.c uses them to strictly
validate input, so module params will reject such values as 0x1234xxxx and
returns an error:
write error: Invalid argument
Any modules which export numeric sysfs node can use strict_strtox instead of
simple_strtox to reject any invalid input.
Here are some test results:
Before applying this patch:
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000g > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000gggggggg > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 010000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0100008 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 010000aaaaa > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]#
After applying this patch:
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000g > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000gggggggg > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# echo 010000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# echo 0100008 > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# echo 010000aaaaa > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo -n 4096 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]#
[akpm@linux-foundation.org: fix compiler warnings]
[akpm@linux-foundation.org: fix off-by-one found by tiwai@suse.de]
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasprintf pulls in kmalloc which proved to be fatal for at least
bootimage target on alpha.
Move it to a separate file so only users of kasprintf are exposed
to the dependency on kmalloc.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Optimize integer-to-string conversion in vsprintf.c for base 10. This is
by far the most used conversion, and in some use cases it impacts
performance. For example, top reads /proc/$PID/stat for every process, and
with 4000 processes decimal conversion alone takes noticeable time.
Using code from
http://www.cs.uiowa.edu/~jones/bcd/decimal.html
(with permission from the author, Douglas W. Jones)
binary-to-decimal-string conversion is done in groups of five digits at
once, using only additions/subtractions/shifts (with -O2; -Os throws in
some multiply instructions).
On i386 arch gcc 4.1.2 -O2 generates ~500 bytes of code.
This patch is run tested. Userspace benchmark/test is also attached.
I tested it on PIII and AMD64 and new code is generally ~2.5 times
faster. On AMD64:
# ./vsprintf_verify-O2
Original decimal conv: .......... 151 ns per iteration
Patched decimal conv: .......... 62 ns per iteration
Testing correctness
12895992590592 ok... [Ctrl-C]
# ./vsprintf_verify-O2
Original decimal conv: .......... 151 ns per iteration
Patched decimal conv: .......... 62 ns per iteration
Testing correctness
26025406464 ok... [Ctrl-C]
More realistic test: top from busybox project was modified to
report how many us it took to scan /proc (this does not account
any processing done after that, like sorting process list),
and then I test it with 4000 processes:
#!/bin/sh
i=4000
while test $i != 0; do
sleep 30 &
let i--
done
busybox top -b -n3 >/dev/null
on unpatched kernel:
top: 4120 processes took 102864 microseconds to scan
top: 4120 processes took 91757 microseconds to scan
top: 4120 processes took 92517 microseconds to scan
top: 4120 processes took 92581 microseconds to scan
on patched kernel:
top: 4120 processes took 75460 microseconds to scan
top: 4120 processes took 66451 microseconds to scan
top: 4120 processes took 67267 microseconds to scan
top: 4120 processes took 67618 microseconds to scan
The speedup comes from much faster generation of /proc/PID/stat
by sprintf() calls inside the kernel.
Signed-off-by: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* There is no point in having full "0...9a...z" constant vector,
if we use only "0...9a...f" (and "x" for "0x").
* Post-decrement usually needs a few more instructions, so use
pre decrement instead where makes sense:
- while (i < precision--) {
+ while (i <= --precision) {
* if base != 10 (=> base 8 or 16), we can avoid using division
in a loop and use mask/shift, obtaining much faster conversion.
(More complex optimization for base 10 case is in the second patch).
Overall, size vsprintf.o shows ~80 bytes smaller text section
with this patch applied.
Signed-off-by: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I was playing with some code that sometimes got a string where a %n
match should have been done where the input string ended, for example
like this:
sscanf("abc123", "abc%d%n", &a, &n); /* doesn't work */
sscanf("abc123a", "abc%d%n", &a, &n); /* works */
However, the scanf function in the kernel doesn't convert the %n in that
case because it has already matched the complete input after %d and just
completely stops matching then. This patch fixes that.
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a kvasprintf() function to complement kasprintf().
No in-tree users yet, but I have some coming up.
[akpm@linux-foundation.org: EXPORT it]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value of scnprintf() never exceeds @size.
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A variety of (mostly) innocuous fixes to the embedded kernel-doc content in
source files, including:
* make multi-line initial descriptions single line
* denote some function names, constants and structs as such
* change erroneous opening '/*' to '/**' in a few places
* reword some text for clarity
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent vsnprintf() fix introduced an off-by-one, and it's now
possible to overrun the target buffer by one byte.
The "end" pointer points to past the end of the buffer, so if we
have to truncate the result, it needs to be done though "end[-1]".
[ This is just an alternate and simpler patch to one proposed by Andrew
and Jeremy, who actually noticed the problem ]
Acked-by: Andrew Morton <akpm@osdl.org>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement kasprintf, a kernel version of asprintf. This allocates the
memory required for the formatted string, including the trailing '\0'.
Returns NULL on allocation failure.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This change allows callers to use a 0-byte buffer and a NULL buffer pointer
with vsnprintf, so it can be used to determine how large the resulting
formatted string will be.
Previously the code effectively treated a size of 0 as a size of 4G (on
32-bit systems), with other checks preventing it from actually trying to
emit the string - but the terminal \0 would still be written, which would
crash if the buffer is NULL.
This change changes the boundary check so that 'end' points to the putative
location of the terminal '\0', which is only written if size > 0.
vsnprintf still allows the buffer size to be set very large, to allow
unbounded buffer sizes (to implement sprintf, etc).
[akpm@osdl.org: fix long-vs-longlong confusion]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.
In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch. This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other. So if any
hunk rejects or gets in the way of other patches, just drop it. My scripts
will pick it up again in the next round.
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
handling of %t... (ptrdiff_t) in vsnprintf
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
