Convert cifs_iovec_read to use async I/O. This also raises the limit on
the rsize for uncached reads. We first allocate a set of pages to hold
the replies, then issue the reads in parallel and then collect the
replies and copy the results into the iovec.
A possible future optimization would be to kmap and inline the iovec
buffers and read the data directly from the socket into that. That would
require some rather complex conversion of the iovec into a kvec however.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
This isn't strictly necessary for the async readpages code, but the
uncached version will need to be able to collect the replies after
issuing the calls. Add a kref to cifs_readdata and use change the
code to take and put references appropriately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cached and uncached reads will need to do different things here to
handle the difference when the pages are in pagecache and not. Abstract
out the function that marshals the page list into a kvec array.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We'll need different completion routines for an uncached read. Allow
the caller to set the one he needs at allocation time. Also, move
most of these functions to file.c so we can make more of them static.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Nalluru reported hitting the BUG_ON(__thread_has_fpu(tsk)) in
arch/x86/kernel/xsave.c:__sanitize_i387_state() during the coredump
of a multi-threaded application.
A look at the exit seqeuence shows that other threads can still be on the
runqueue potentially at the below shown exit_mm() code snippet:
if (atomic_dec_and_test(&core_state->nr_threads))
complete(&core_state->startup);
===> other threads can still be active here, but we notify the thread
===> dumping core to wakeup from the coredump_wait() after the last thread
===> joins this point. Core dumping thread will continue dumping
===> all the threads state to the core file.
for (;;) {
set_task_state(tsk, TASK_UNINTERRUPTIBLE);
if (!self.task) /* see coredump_finish() */
break;
schedule();
}
As some of those threads are on the runqueue and didn't call schedule() yet,
their fpu state is still active in the live registers and the thread
proceeding with the coredump will hit the above mentioned BUG_ON while
trying to dump other threads fpustate to the coredump file.
BUG_ON() in arch/x86/kernel/xsave.c:__sanitize_i387_state() is
in the code paths for processors supporting xsaveopt. With or without
xsaveopt, multi-threaded coredump is broken and maynot contain
the correct fpustate at the time of exit.
In coredump_wait(), wait for all the threads to be come inactive, so
that we are sure all the extended register state is flushed to
the memory, so that it can be reliably copied to the core file.
Reported-by: Suresh Nalluru <suresh@aristanetworks.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1336692811-30576-2-git-send-email-suresh.b.siddha@intel.com
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Old users may not expect EINVAL, and there is no clear user-visibile
behavior change now that we ignore it.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
When we are setting a new layout, fully initialize the structure:
- zero it out
- always set preferred_osd to -1
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
fs/nfs/nfs4namespace.c: In function ‘nfs4_create_sec_client’:
fs/nfs/nfs4namespace.c:171:2: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
Introduced by commit 72de53ec4b
"NFS: Do secinfo as part of lookup"
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch removes the 'dbg_err()' macro and we now use 'ubifs_err()' instead.
The idea of 'dbg_err()' was to compile out some error message to make the
binary a bit smaller - but I think it was a bad idea.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Have the debugging stuff always compiled-in instead. It simplifies maintanance
a lot.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
...and add a "directio" synonym since that's what the manpage has
always advertised.
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This commit re-names all functions which dump something from "dbg_dump_*()" to
"ubifs_dump_*()". This is done for consistency with UBI and because this way it
will be more logical once we remove the debugging sompilation option.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
In case of errors we almost always need the stack dump - it makes no sense
to compile it out. Remove the 'dbg_dump_stack()' function completely.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Since ramoops was converted to pstore, it has nothing to do with character
devices nowadays. Instead, today it is just a RAM backend for pstore.
The patch just moves things around. There are a few changes were needed
because of the move:
1. Kconfig and Makefiles fixups, of course.
2. In pstore/ram.c we have to play a bit with MODULE_PARAM_PREFIX, this
is needed to keep user experience the same as with ramoops driver
(i.e. so that ramoops.foo kernel command line arguments would still
work).
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Marco Stornelli <marco.stornelli@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes function gfs2_adjust_quota so that it properly
returns a good (zero) return code on the normal path through the code.
Without this, mounting GFS2 with -o quota=account periodically gave
this error message: GFS2: fsid=cluster:fs: gfs2_quotad: sync error -5
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The comment is outdated and isn't particularly informative anyway - NULL
meaning the default behavior is very common in kernel. And we really set about
half of entries. So remove the whole comment for ext2_export_ops.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This is based on commit d1f5273e9a
ext4: return 32/64-bit dir name hash according to usage type
by Fan Yong <yong.fan@whamcloud.com>
Traditionally ext2/3/4 has returned a 32-bit hash value from llseek()
to appease NFSv2, which can only handle a 32-bit cookie for seekdir()
and telldir(). However, this causes problems if there are 32-bit hash
collisions, since the NFSv2 server can get stuck resending the same
entries from the directory repeatedly.
Allow ext3 to return a full 64-bit hash (both major and minor) for
telldir to decrease the chance of hash collisions.
This patch does implement a new ext3_dir_llseek op, because with 64-bit
hashes, nfs will attempt to seek to a hash "offset" which is much
larger than ext3's s_maxbytes. So for dx dirs, we call
generic_file_llseek_size() with the appropriate max hash value as the
maximum seekable size. Otherwise we just pass through to
generic_file_llseek().
Patch-updated-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Patch-updated-by: Eric Sandeen <sandeen@redhat.com>
(blame us if something is not correct)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
So far i_mutex was ranking above dqonoff_mutex and i_mutex on quota files
was special and ranking below dqonoff_mutex (and several other locks).
However there's no real need for i_mutex on quota files to be special.
IO on quota files is serialized by dqio_mutex anyway so we don't need to
take i_mutex when writing to quota files. Other places where we take i_mutex
on quota file can accomodate standard i_mutex lock ranking, we only need
to change the lock ranking to be dqonoff_mutex > i_mutex which is a matter
of changing documentation because there's no place which would enforce
ordering in the other direction.
Signed-off-by: Jan Kara <jack@suse.cz>
We don't need i_mutex in ext2_quota_write() because writes to quota file
are serialized by dqio_mutex anyway. Changes to quota files outside of quota
code are forbidded and enforced by NOATIME and IMMUTABLE bits.
Signed-off-by: Jan Kara <jack@suse.cz>
We don't need i_mutex in reiserfs_quota_write() because writes to quota file
are serialized by dqio_mutex anyway. Changes to quota files outside of quota
code are forbidded and enforced by NOATIME and IMMUTABLE bits.
Signed-off-by: Jan Kara <jack@suse.cz>
We don't need i_mutex in ext4_quota_write() because writes to quota file
are serialized by dqio_mutex anyway. Changes to quota files outside of quota
code are forbidded and enforced by NOATIME and IMMUTABLE bits.
Signed-off-by: Jan Kara <jack@suse.cz>
We don't need i_mutex in ext3_quota_write() because writes to quota file
are serialized by dqio_mutex anyway. Changes to quota files outside of quota
code are forbidded and enforced by NOATIME and IMMUTABLE bits.
Signed-off-by: Jan Kara <jack@suse.cz>
When CONFIG_QUOTA_DEBUG is enabled we call inode_get_rsv_space() from
add_dquot_ref() while holding i_lock. But inode_get_rsv_space() is trying
to get i_lock as well resulting in double lock.
Fix the problem by moving inode_get_rsv_space() call out of i_lock.
Reported-and-analyzed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If journal superblock is written only in disk's caches and other transaction
starts reusing space of the transaction cleaned from the log, it can happen
blocks of a new transaction reach the disk before journal superblock. When
power failure happens in such case, subsequent journal replay would still try
to replay the old transaction but some of it's blocks may be already
overwritten by the new transaction. For this reason we must use WRITE_FUA when
updating log tail and we must first write new log tail to disk and update
in-memory information only after that.
Signed-off-by: Jan Kara <jack@suse.cz>
There are some log tail updates that are not protected by j_checkpoint_mutex.
Some of these are harmless because they happen during startup or shutdown but
updates in journal_commit_transaction() and journal_flush() can really race
with other log tail updates (e.g. someone doing journal_flush() with someone
running cleanup_journal_tail()). So protect all log tail updates with
j_checkpoint_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
There are three case of updating journal superblock. In the first case, we want
to mark journal as empty (setting s_sequence to 0), in the second case we want
to update log tail, in the third case we want to update s_errno. Split these
cases into separate functions. It makes the code slightly more straightforward
and later patches will make the distinction even more important.
Signed-off-by: Jan Kara <jack@suse.cz>
- Store uids and gids with kuid_t and kgid_t in struct kstat
- Convert uid and gids to userspace usable values with
from_kuid and from_kgid
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
xfs_sync_worker checks the MS_ACTIVE flag in s_flags to avoid doing
work during mount and unmount. This flag can be cleared by unmount
after the xfs_sync_worker checks it but before the work is completed.
The has caused crashes in the completion handler for the dummy
transaction commited by xfs_sync_worker:
PID: 27544 TASK: ffff88013544e040 CPU: 3 COMMAND: "kworker/3:0"
#0 [ffff88016fdff930] machine_kexec at ffffffff810244e9
#1 [ffff88016fdff9a0] crash_kexec at ffffffff8108d053
#2 [ffff88016fdffa70] oops_end at ffffffff813ad1b8
#3 [ffff88016fdffaa0] no_context at ffffffff8102bd48
#4 [ffff88016fdffaf0] __bad_area_nosemaphore at ffffffff8102c04d
#5 [ffff88016fdffb40] bad_area_nosemaphore at ffffffff8102c12e
#6 [ffff88016fdffb50] do_page_fault at ffffffff813afaee
#7 [ffff88016fdffc60] page_fault at ffffffff813ac635
[exception RIP: xlog_get_lowest_lsn+0x30]
RIP: ffffffffa04a9910 RSP: ffff88016fdffd10 RFLAGS: 00010246
RAX: ffffc90014e48000 RBX: ffff88014d879980 RCX: ffff88014d879980
RDX: ffff8802214ee4c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88016fdffd10 R8: ffff88014d879a80 R9: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8802214ee400
R13: ffff88014d879980 R14: 0000000000000000 R15: ffff88022fd96605
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#8 [ffff88016fdffd18] xlog_state_do_callback at ffffffffa04aa186 [xfs]
#9 [ffff88016fdffd98] xlog_state_done_syncing at ffffffffa04aa568 [xfs]
Protect xfs_sync_worker by using the s_umount semaphore at the read
level to provide exclusion with unmount while work is progressing.
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We aren't allowed to pass NULL pointers to kmem_cache_destroy() so if
both allocations fail, it leads to a NULL dereference.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Teigland <teigland@redhat.com>
C6x userspace supports a shared library mechanism called DSBT for systems with
no MMU. DSBT is similar to FDPIC in allowing shared text segments and private
copies of data segments without an MMU. Both methods access data using a base
register and offset. With FDPIC, the caller of an external function sets up the
base register for the callee. With DSBT, the called function sets up its own
base register. Other details differ but both userspaces need the same thing
from the kernel loader: a map of where each ELF segment was loaded. The FDPIC
loader already provides this, so DSBT just uses it.
This patch enables BINFMT_ELF_FDPIC by default for C6X and provides the
necessary architecture hooks for the generic loader.
Signed-off-by: Mark Salter <msalter@redhat.com>
Obviously we should check for NULL here instead of IS_ERR().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org [3.4]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Most users will use NFS v3 or possibly v4 so this makes it easier for
them.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
With this patch NFS v2 can be disabled during Kconfig. I default the
option to "y" to match the current behavior.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In theory, NFS v3 can have different error versions than NFS v2. v4 is
already using its own nfs4_stat_to_errno() to map error codes, so
rather than create something in the generic client for v2 and v3 to
share I instead give v3 its own function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This allows me to use the filehandle allocated in nfs_fs_mount() for nfs
v4 mounts instead of allocating a new one. Rather than change
nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead
remove the function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This new function chooses between the v2/3 parser and the v4 parser by
filesystem type.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The v2/3 and v4 cases were very similar, with just a few parameters
changed. This makes it easy to share code.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This function returns the same same return type as nfs4_try_mount() so
they two can be more easily substituted.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This field is unconditionally set while parsing mount data, so there is
no need to fill it in here.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At this point, there are only a few small differences between these two
functions. I can set a few function pointers in the nfs_mount_info
struct to get around these differences.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The only difference between nfs_xdev_mount() and nfs4_xdev_mount() is the
clone_super() function called to clone the super block. I can combine
these two functions by using the fill_super field in the mount_info
structure.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs4_remote_mount() function was only slightly different from the
nfs_fs_mount() function used by the generic client. I created a new
nfs_mount_info structure to set different parameters to help combine
these functions.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This flag is numerically equivalent to NFS_MOUNT_UNSHARED, so I can
remove it to make collapsing functions more straightforward.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I intend on creating a single nfs_fs_mount() function used by all our
mount paths. To avoid checking between new mounts and clone mounts, I
instead pass both structures to a new function in super.c that finds the
cache key and then looks up the super cookie.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch splits out the NFS v4 specific functionality of
nfs4_get_root() into its own rpc_op called by the generic client, and
leaves nfs4_proc_get_rootfh() as its own stand alone function. This
also allows me to change nfs4_remote_mount(), nfs4_xdev_mount() and
nfs4_remote_referral_mount() to use the generic client's nfs_get_root()
function. Later patches in this series will collapse these functions
into one common function, so using the same get_root() function
everywhere simplifies future changes.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This function is really getting the root filehandle and not the root
dentry of the filesystem. I also removed the rpc_ops lookup from
nfs4_get_rootfh() under the assumption that if we reach this function
then we already know we are using NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds lseek(2) SEEK_DATA/SEEK_HOLE functionality to xfs.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commit e459df5, 'xfs: move busy extent handling to it's own file'
moved some code from xfs_alloc.c into xfs_extent_busy.c for
convenience in userspace code merges. One of the functions moved is
xfs_extent_busy_trim (formerly xfs_alloc_busy_trim) which is defined
STATIC. Unfortunately this function is still used in xfs_alloc.c, and
this results in an undefined symbol in xfs.ko.
Make xfs_extent_busy_trim not static and add its prototype to
xfs_extent_busy.h.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Rather than specifying XBF_MAPPED for almost all buffers, introduce
XBF_UNMAPPED for the couple of users that use unmapped buffers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we fail to mount the log in xfs_mountfs(), we tear down all the
infrastructure we have already allocated. However, the process of
mounting the log may have progressed to the point of reading,
caching and modifying buffers in memory. Hence before we can free
all the infrastructure, we have to flush and remove all the buffers
from memory.
Problem first reported by Eric Sandeen, later a different incarnation
was reported by Ben Myers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Recent event tracing during a debugging session showed that flags
that define the IO type for a buffer are leaking into the flags on
the buffer incorrectly. Fix the flag exclusion mask in
xfs_buf_alloc() to avoid problems that may be caused by such
leakage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the removal of xfs_rw.h and other changes over time, xfs_bit.h
is being included in many files that don't actually need it. Clean
up the includes as necessary.
Also move the only-used-once xfs_ialloc_find_free() static inline
function out of a header file that is widely included to reduce
the number of needless dependencies on xfs_bit.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_do_force_shutdown now is the only thing in xfs_rw.c. There is no
need to keep it in it's own file anymore, so move it to xfs_fsops.c
next to xfs_fs_goingdown() and kill xfs_rw.c.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The only thing left in xfs_rw.h is a function prototype for an inode
function. Move that to xfs_inode.h, and kill xfs_rw.h.
Also move the function implementing the prototype from xfs_rw.c to
xfs_inode.c so we only have one function left in xfs_rw.c
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
This is the only remaining useful function in xfs_rw.h, so move it
to a header file responsible for block mapping functions that the
callers already include. Soon we can get rid of xfs_rw.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that the busy extent tracking has been moved out of the
allocation files, clean up the namespace it uses to
"xfs_extent_busy" rather than a mix of "xfs_busy" and
"xfs_alloc_busy".
Signed-off-by: Dave Chinner<dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To make it easier to handle userspace code merges, move all the busy
extent handling out of the allocation code and into it's own file.
The userspace code does not need the busy extent code, so this
simplifies the merging of the kernel code into the userspace
xfsprogs library.
Because the busy extent code has been almost completely rewritten
over the past couple of years, also update the copyright on this new
file to include the authors that made all those changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Untangle the header file includes a bit by moving the definition of
xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on
xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include
xfs_ag.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
fsstress has a particular effective way of stopping debug XFS
kernels. We keep seeing assert failures due finding delayed
allocation extents where there should be none. This shows up when
extracting extent maps and we are holding all the locks we should be
to prevent races, so this really makes no sense to see these errors.
After checking that fsstress does not use mmap, it occurred to me
that fsstress uses something that no sane application uses - the
XFS_IOC_ALLOCSP ioctl interfaces for preallocation. These interfaces
do allocation of blocks beyond EOF without using preallocation, and
then call setattr to extend and zero the allocated blocks.
THe problem here is this is a buffered write, and hence the
allocation is a delayed allocation. Unlike the buffered IO path, the
allocation and zeroing are not serialised using the IOLOCK. Hence
the ALLOCSP operation can race with operations holding the iolock to
prevent buffered IO operations from occurring.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Just about all callers of xfs_buf_read() and xfs_buf_get() use XBF_DONTBLOCK.
This is used to make memory allocation use GFP_NOFS rather than GFP_KERNEL to
avoid recursion through memory reclaim back into the filesystem.
All the blocking get calls in growfs occur inside a transaction, even though
they are no part of the transaction, so all allocation will be GFP_NOFS due to
the task flag PF_TRANS being set. The blocking read calls occur during log
recovery, so they will probably be unaffected by converting to GFP_NOFS
allocations.
Hence make XBF_DONTBLOCK behaviour always occur for buffers and kill the flag.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_read_buf() is effectively the same as xfs_trans_read_buf() when called
outside a transaction context. The error handling is slightly different in that
xfs_read_buf stales the errored buffer it gets back, but there is probably good
reason for xfs_trans_read_buf() for doing this.
Hence update xfs_trans_read_buf() to the same error handling as xfs_read_buf(),
and convert all the callers of xfs_read_buf() to use the former function. We can
then remove xfs_read_buf().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Buffers are always returned locked from the lookup routines. Hence
we don't need to tell the lookup routines to return locked buffers,
on to try and lock them. Remove XBF_LOCK from all the callers and
from internal buffer cache usage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_buf_btoc and friends are simple macros that do basic block
to page index conversion and vice versa. These aren't widely used,
and we use open coded masking and shifting everywhere else. Hence
remove the macros and open code the work they do.
Also, use of PAGE_CACHE_{SIZE|SHIFT|MASK} for these macros is now
incorrect - we are using pages directly and not the page cache, so
use PAGE_{SIZE|MASK|SHIFT} instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we pass block counts everywhere, and index buffers by block
number and length in units of blocks, convert the desired IO size
into block counts rather than bytes. Convert the code to use block
counts, and those that need byte counts get converted at the time of
use.
Rename the b_desired_count variable to something closer to it's
purpose - b_io_length - as it is only used to specify the length of
an IO for a subset of the buffer. The only time this is used is for
log IO - both writing iclogs and during log recovery. In all other
cases, the b_io_length matches b_length, and hence a lot of code
confuses the two. e.g. the buf item code uses the io count
exclusively when it should be using the buffer length. Fix these
apprpriately as they are found.
Also, remove the XFS_BUF_{SET_}COUNT() macros that are just wrappers
around the desired IO length. They only serve to make the code
shouty loud, don't actually add any real value, and are often used
incorrectly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we pass block counts everywhere, and index buffers by block
number, track the length of the buffer in units of blocks rather
than bytes. Convert the code to use block counts, and those that
need byte counts get converted at the time of use.
Also, remove the XFS_BUF_{SET_}SIZE() macros that are just wrappers
around the buffer length. They only serve to make the code shouty
loud and don't actually add any real value.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Seeing as we pass block numbers around everywhere in the buffer
cache now, it makes no sense to index everything by byte offset.
Replace all the byte offset indexing with block number based
indexing, and replace all uses of the byte offset with direct
conversion from the block index.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xfs_buf_get/read API is not consistent in the units it uses, and
does not use appropriate or consistent units/types for the
variables.
Convert the API to use disk addresses and block counts for all
buffer get and read calls. Use consistent naming for all the
functions and their declarations, and convert the internal functions
to use disk addresses and block counts to avoid need to convert them
from one type to another and back again.
Fix all the callers to use disk addresses and block counts. In many
cases, this removes an additional conversion from the function call
as the callers already have a block count.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To replace the alloc/memset pair.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Because we no longer use the page cache for buffering, there is no
direct block number to page offset relationship anymore.
xfs_buf_get_pages is still setting up b_offset as if there was some
relationship, and that is leading to incorrectly setting up
*uncached* buffers that don't overwrite b_offset once they've had
pages allocated.
For cached buffers, the first block of the buffer is always at offset
zero into the allocated memory. This is true for sub-page sized
buffers, as well as for multiple-page buffers.
For uncached buffers, b_offset is only non-zero when we are
associating specific memory to the buffers, and that is set
correctly by the code setting up the buffer.
Hence remove the setting of b_offset in xfs_buf_get_pages, because
it is now always the wrong thing to do.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we call xfs_buf_iowait() on a buffer that failed dispatch due to
an IO error, it will wait forever for an Io that does not exist.
This is hndled in xfs_buf_read, but there is other code that calls
xfs_buf_iowait directly that doesn't.
Rather than make the call sites have to handle checking for dispatch
errors and then checking for completion errors, make
xfs_buf_iowait() check for dispatch errors on the buffer before
waiting. This means we handle both dispatch and completion errors
with one set of error handling at the caller sites.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When memory allocation fails to add the page array or tht epages to
a buffer during xfs_buf_get(), the buffer is left in the cache in a
partially initialised state. There is enough state left for the next
lookup on that buffer to find the buffer, and for the buffer to then
be used without finishing the initialisation. As a result, when an
attempt to do IO on the buffer occurs, it fails with EIO because
there are no pages attached to the buffer.
We cannot remove the buffer from the cache immediately and free it,
because there may already be a racing lookup that is blocked on the
buffer lock. Hence the moment we unlock the buffer to then free it,
the other user is woken and we have a use-after-free situation.
To avoid this race condition altogether, allocate the pages for the
buffer before we insert it into the cache. This then means that we
don't have an allocation failure case to deal after the buffer is
already present in the cache, and hence avoid the problem
altogether. In most cases we won't have racing inserts for the same
buffer, and so won't increase the memory pressure allocation before
insertion may entail.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfstest 229 exposes a problem with buffered IO, delayed allocation
and extent size hints. That is when we do delayed allocation during
buffered IO, we reserve space for the extent size hint alignment and
allocate the physical space to align the extent, but we do not zero
the regions of the extent that aren't written by the write(2)
syscall. The result is that we expose stale data in unwritten
regions of the extent size hints.
There are two ways to fix this. The first is to detect that we are
doing unaligned writes, check if there is already a mapping or data
over the extent size hint range, and if not zero the page cache
first before then doing the real write. This can be very expensive
for large extent size hints, especially if the subsequent writes
fill then entire extent size before the data is written to disk.
The second, and simpler way, is simply to turn off delayed
allocation when the extent size hint is set and use preallocation
instead. This results in unwritten extents being laid down on disk
and so only the written portions will be converted. This matches the
behaviour for direct IO, and will also work for the real time
device. The disadvantage of this approach is that for small extent
size hints we can get file fragmentation, but in general extent size
hints are fairly large (e.g. stripe width sized) so this isn't a big
deal.
Implement the second approach as it is simple and effective.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Speculative delayed allocation beyond EOF near the maximum supported
file offset can result in creating delalloc extents beyond
mp->m_maxioffset (8EB). These can never be trimmed during
xfs_free_eof_blocks() because they are beyond mp->m_maxioffset, and
that results in assert failures in xfs_fs_destroy_inode() due to
delalloc blocks still being present. xfstests 071 exposes this
problem.
Limit speculative delalloc to mp->m_maxioffset to avoid this
problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we are doing speculative delayed allocation beyond EOF,
conversion of the region allocated beyond EOF is dependent on the
largest free space extent available. If the largest free extent is
smaller than the delalloc range, then after allocation we leave
a delalloc extent that starts beyond EOF. This extent cannot *ever*
be converted by flushing data, and so will remain there until either
the EOF moves into the extent or it is truncated away.
Hence if xfs_getbmap() runs on such an inode and is asked to return
extents beyond EOF, it will assert fail on this extent even though
there is nothing xfs_getbmap() can do to convert it to a real
extent. Hence we should simply report these delalloc extents rather
than assert that there should be none.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Often mounting small filesystem with small logs will emit a warning
such as:
XFS (vdb): Invalid block length (0x2000) for buffer
during log recovery. This causes tests to randomly fail because this
output causes the clean filesystem checks on test completion to
think the filesystem is inconsistent.
The cause of the error is simply that log recovery is asking for a
buffer size that is larger than the log when zeroing the tail. This
is because the buffer size is rounded up, and if the right head and
tail conditions exist then the buffer size can be larger than the log.
Limit the variable size xlog_get_bp() callers to requesting buffers
smaller than the log.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When a partial write inside EOF fails, it can leave delayed
allocation blocks lying around because they don't get punched back
out. This leads to assert failures like:
XFS: Assertion failed: XFS_FORCED_SHUTDOWN(ip->i_mount) || ip->i_delayed_blks == 0, file: fs/xfs/xfs_super.c, line: 847
when evicting inodes from the cache. This can be trivially triggered
by xfstests 083, which takes between 5 and 15 executions on a 512
byte block size filesystem to trip over this. Debugging shows a
failed write due to ENOSPC calling xfs_vm_write_failed such as:
[ 5012.329024] ino 0xa0026: vwf to 0x17000, sze 0x1c85ae
and no action is taken on it. This leaves behind a delayed
allocation extent that has no page covering it and no data in it:
[ 5015.867162] ino 0xa0026: blks: 0x83 delay blocks 0x1, size 0x2538c0
[ 5015.868293] ext 0: off 0x4a, fsb 0x50306, len 0x1
[ 5015.869095] ext 1: off 0x4b, fsb 0x7899, len 0x6b
[ 5015.869900] ext 2: off 0xb6, fsb 0xffffffffe0008, len 0x1
^^^^^^^^^^^^^^^
[ 5015.871027] ext 3: off 0x36e, fsb 0x7a27, len 0xd
[ 5015.872206] ext 4: off 0x4cf, fsb 0x7a1d, len 0xa
So the delayed allocation extent is one block long at offset
0x16c00. Tracing shows that a bigger write:
xfs_file_buffered_write: size 0x1c85ae offset 0x959d count 0x1ca3f ioflags
allocates the block, and then fails with ENOSPC trying to allocate
the last block on the page, leading to a failed write with stale
delalloc blocks on it.
Because we've had an ENOSPC when trying to allocate 0x16e00, it
means that we are never goinge to call ->write_end on the page and
so the allocated new buffer will not get marked dirty or have the
buffer_new state cleared. In other works, what the above write is
supposed to end up with is this mapping for the page:
+------+------+------+------+------+------+------+------+
UMA UMA UMA UMA UMA UMA UND FAIL
where: U = uptodate
M = mapped
N = new
A = allocated
D = delalloc
FAIL = block we ENOSPC'd on.
and the key point being the buffer_new() state for the newly
allocated delayed allocation block. Except it doesn't - we're not
marking buffers new correctly.
That buffer_new() problem goes back to the xfs_iomap removal days,
where xfs_iomap() used to return a "new" status for any map with
newly allocated blocks, so that __xfs_get_blocks() could call
set_buffer_new() on it. We still have the "new" variable and the
check for it in the set_buffer_new() logic - except we never set it
now!
Hence that newly allocated delalloc block doesn't have the new flag
set on it, so when the write fails we cannot tell which blocks we
are supposed to punch out. WHy do we need the buffer_new flag? Well,
that's because we can have this case:
+------+------+------+------+------+------+------+------+
UMD UMD UMD UMD UMD UMD UND FAIL
where all the UMD buffers contain valid data from a previously
successful write() system call. We only want to punch the UND buffer
because that's the only one that we added in this write and it was
only this write that failed.
That implies that even the old buffer_new() logic was wrong -
because it would result in all those UMD buffers on the page having
set_buffer_new() called on them even though they aren't new. Hence
we shoul donly be calling set_buffer_new() for delalloc buffers that
were allocated (i.e. were a hole before xfs_iomap_write_delay() was
called).
So, fix this set_buffer_new logic according to how we need it to
work for handling failed writes correctly. Also, restore the new
buffer logic handling for blocks allocated via
xfs_iomap_write_direct(), because it should still set the buffer_new
flag appropriately for newly allocated blocks, too.
SO, now we have the buffer_new() being set appropriately in
__xfs_get_blocks(), we can detect the exact delalloc ranges that
we allocated in a failed write, and hence can now do a walk of the
buffers on a page to find them.
Except, it's not that easy. When block_write_begin() fails, it
unlocks and releases the page that we just had an error on, so we
can't use that page to handle errors anymore. We have to get access
to the page while it is still locked to walk the buffers. Hence we
have to open code block_write_begin() in xfs_vm_write_begin() to be
able to insert xfs_vm_write_failed() is the right place.
With that, we can pass the page and write range to
xfs_vm_write_failed() and walk the buffers on the page, looking for
delalloc buffers that are either new or beyond EOF and punch them
out. Handling buffers beyond EOF ensures we still handle the
existing case that xfs_vm_write_failed() handles.
Of special note is the truncate_pagecache() handling - that only
should be done for pages outside EOF - pages within EOF can still
contain valid, dirty data so we must not punch them out of the
cache.
That just leaves the xfs_vm_write_end() failure handling.
The only failure case here is that we didn't copy the entire range,
and generic_write_end() handles that by zeroing the region of the
page that wasn't copied, we don't have to punch out blocks within
the file because they are guaranteed to contain zeros. Hence we only
have to handle the existing "beyond EOF" case and don't need access
to the buffers on the page. Hence it remains largely unchanged.
Note that xfs_getbmap() can still trip over delalloc blocks beyond
EOF that are left there by speculative delayed allocation. Hence
this bug fix does not solve all known issues with bmap vs delalloc,
but it does fix all the the known accidental occurances of the
problem.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_is_delayed_page() checks to see if a page has buffers matching
the given IO type passed in. It does so by walking the buffer heads
on the page and checking if the state flags match the IO type.
However, the "acceptable" variable that is calculated is overwritten
every time a new buffer is checked. Hence if the first buffer on the
page is of the right type, this state is lost if the second buffer
is not of the correct type. This means that xfs_aops_discard_page()
may not discard delalloc regions when it is supposed to, and
xfs_convert_page() may not cluster IO as efficiently as possible.
This problem only occurs on filesystems with a block size smaller
than page size.
Also, rename xfs_is_delayed_page() to xfs_check_page_type() to
better describe what it is doing - it is not delalloc specific
anymore.
The problem was first noticed by Peter Watkins.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Doing background CIL flushes adds significant latency to whatever
async transaction that triggers it. To avoid blocking async
transactions on things like waiting for log buffer IO to complete,
move the CIL push off into a workqueue. By moving the push work
into a workqueue, we remove all the latency that the commit adds
from the foreground transaction commit path. This also means that
single threaded workloads won't do the CIL push procssing, leaving
them more CPU to do more async transactions.
To do this, we need to keep track of the sequence number we have
pushed work for. This avoids having many transaction commits
attempting to schedule work for the same sequence, and ensures that
we only ever have one push (background or forced) in progress at a
time. It also means that we don't need to take the CIL lock in write
mode to check for potential background push races, which reduces
lock contention.
To avoid potential issues with "smart" IO schedulers, don't use the
workqueue for log force triggered flushes. Instead, do them directly
so that the log IO is done directly by the process issuing the log
force and so doesn't get stuck on IO elevator queue idling
incorrectly delaying the log IO from the workqueue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans_ail_delete_bulk() can be called from different contexts so
if the item is not in the AIL we need different shutdown for each
context. Pass in the shutdown method needed so the correct action
can be taken.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Queue delwri buffers on a local on-stack list instead of a per-buftarg one,
and write back the buffers per-process instead of by waking up xfsbufd.
This is now easily doable given that we have very few places left that write
delwri buffers:
- log recovery:
Only done at mount time, and already forcing out the buffers
synchronously using xfs_flush_buftarg
- quotacheck:
Same story.
- dquot reclaim:
Writes out dirty dquots on the LRU under memory pressure. We might
want to look into doing more of this via xfsaild, but it's already
more optimal than the synchronous inode reclaim that writes each
buffer synchronously.
- xfsaild:
This is the main beneficiary of the change. By keeping a local list
of buffers to write we reduce latency of writing out buffers, and
more importably we can remove all the delwri list promotions which
were hitting the buffer cache hard under sustained metadata loads.
The implementation is very straight forward - xfs_buf_delwri_queue now gets
a new list_head pointer that it adds the delwri buffers to, and all callers
need to eventually submit the list using xfs_buf_delwi_submit or
xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are
skipped in xfs_buf_delwri_queue, assuming they already are on another delwri
list. The biggest change to pass down the buffer list was done to the AIL
pushing. Now that we operate on buffers the trylock, push and pushbuf log
item methods are merged into a single push routine, which tries to lock the
item, and if possible add the buffer that needs writeback to the buffer list.
This leads to much simpler code than the previous split but requires the
individual IOP_PUSH instances to unlock and reacquire the AIL around calls
to blocking routines.
Given that xfsailds now also handle writing out buffers, the conditions for
log forcing and the sleep times needed some small changes. The most
important one is that we consider an AIL busy as long we still have buffers
to push, and the other one is that we do increment the pushed LSN for
buffers that are under flushing at this moment, but still count them towards
the stuck items for restart purposes. Without this we could hammer on stuck
items without ever forcing the log and not make progress under heavy random
delete workloads on fast flash storage devices.
[ Dave Chinner:
- rebase on previous patches.
- improved comments for XBF_DELWRI_Q handling
- fix XBF_ASYNC handling in queue submission (test 106 failure)
- rename delwri submit function buffer list parameters for clarity
- xfs_efd_item_push() should return XFS_ITEM_PINNED ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Instead of adding buffers to the delwri list as soon as they are logged,
even if they can't be written until commited because they are pinned
defer adding them to the delwri list until xfsaild pushes them. This
makes the code more similar to other log items and prepares for writing
buffers directly from xfsaild.
The complication here is that we need to fail buffers that were added
but not logged yet in xfs_buf_item_unpin, borrowing code from
xfs_bioerror.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Instead of writing the buffer directly from inside xfs_qm_dqflush return it
to the caller and let the caller decide what to do with the buffer. Also
remove the pincount check in xfs_qm_dqflush that all non-blocking callers
already implement and the now unused flags parameter and the XFS_DQ_IS_DIRTY
check that all callers already perform.
[ Dave Chinner: fixed build error cause by missing '{'. ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Instead of writing the buffer directly from inside xfs_iflush return it to
the caller and let the caller decide what to do with the buffer. Also
remove the pincount check in xfs_iflush that all non-blocking callers already
implement and the now unused flags parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We already flush dirty inodes throug the AIL regularly, there is no reason
to have second thread compete with it and disturb the I/O pattern. We still
do write inodes when doing a synchronous reclaim from the shrinker or during
unmount for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we write back all metadata either synchronously or through
the AIL we can simply implement metadata freezing in terms of
emptying the AIL.
The implementation for this is fairly simply and straight-forward:
A new routine is added that asks the xfsaild to push the AIL to the
end and waits for it to complete and send a wakeup. The routine will
then loop if the AIL is not actually empty, and continue to do so
until the AIL is compeltely empty.
We keep an inode reclaim pass in the freeze process to avoid having
memory pressure have to reclaim inodes that require dirtying the
filesystem to be reclaimed after the freeze has completed. This
means we can also treat unmount in the exact same way as freeze.
As an upside we can now remove the radix tree based inode writeback
and xfs_unmountfs_writesb.
[ Dave Chinner:
- Cleaned up commit message.
- Added inode reclaim passes back into freeze.
- Cleaned up wakeup mechanism to avoid the use of a new
sleep counter variable. ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Provide a variant of xlog_assign_tail_lsn that has the AIL lock already
held. By doing so we do an additional atomic_read + atomic_set under
the lock, which comes down to two instructions.
Switch xfs_trans_ail_update_bulk and xfs_trans_ail_delete_bulk to the
new version to reduce the number of lock roundtrips, and prepare for
a new addition that would require a third lock roundtrip in
xfs_trans_ail_delete_bulk. This addition is also the reason for
slightly rearranging the conditionals and relying on xfs_log_space_wake
for checking that the filesystem has been shut down internally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If a filesystem has been forced shutdown we are never going to write inodes
to disk, which means the inode items will stay in the AIL until we free
the inode. Currently that is not a problem, but a pending change requires us
to empty the AIL before shutting down the filesystem. In that case leaving
the inode in the AIL is lethal. Make sure to remove the log item from the AIL
to allow emptying the AIL on shutdown filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If a filesystem has been forced shutdown we are never going to write dquots
to disk, which means the dquot items will stay in the AIL forever.
Currently that is not a problem, but a pending chance requires us to
empty the AIL before shutting down the filesystem, in which case this
behaviour is lethal. Make sure to remove the log item from the AIL
to allow emptying the AIL on shutdown filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Issuing a block device flush request in transaction context using GFP_KERNEL
directly can cause deadlocks due to memory reclaim recursion. Use GFP_NOFS to
avoid recursion from reclaim context.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
I've been seeing regular ASSERT failures in xfstests when running
fsstress based tests over the past month. xfs_getbmap() has been
failing this test:
XFS: Assertion failed: ((iflags & BMV_IF_DELALLOC) != 0) ||
(map[i].br_startblock != DELAYSTARTBLOCK), file: fs/xfs/xfs_bmap.c,
line: 5650
where it is encountering a delayed allocation extent after writing
all the dirty data to disk and then walking the extent map
atomically by holding the XFS_IOLOCK_SHARED to prevent new delayed
allocation extents from being created.
Test 083 on a 512 byte block size filesystem was used to reproduce
the problem, because it only had a 5s run timeand would usually fail
every 3-4 runs. This test is exercising ENOSPC behaviour by running
fsstress on a nearly full filesystem. The following trace extract
shows the final few events on the inode that tripped the assert:
xfs_ilock: flags ILOCK_EXCL caller xfs_setfilesize
xfs_setfilesize: isize 0x180000 disize 0x12d400 offset 0x17e200 count 7680
file size updated to 0x180000 by IO completion
xfs_ilock: flags ILOCK_EXCL caller xfs_iomap_write_delay
xfs_iext_insert: state idx 3 offset 3072 block 4503599627239432 count 1 flag 0 caller xfs_bmap_add_extent_hole_delay
xfs_get_blocks_alloc: size 0x180000 offset 0x180000 count 512 type startoff 0xc00 startblock -1 blockcount 0x1
xfs_ilock: flags ILOCK_EXCL caller __xfs_get_blocks
delalloc write, adding a single block at offset 0x180000
xfs_delalloc_enospc: isize 0x180000 disize 0x180000 offset 0x180200 count 512
ENOSPC trying to allocate a dellalloc block at offset 0x180200
xfs_ilock: flags ILOCK_EXCL caller xfs_iomap_write_delay
xfs_get_blocks_alloc: size 0x180000 offset 0x180200 count 512 type startoff 0xc00 startblock -1 blockcount 0x2
And succeeding on retry after flushing dirty inodes.
xfs_ilock: flags ILOCK_EXCL caller __xfs_get_blocks
xfs_delalloc_enospc: isize 0x180000 disize 0x180000 offset 0x180400 count 512
ENOSPC trying to allocate a dellalloc block at offset 0x180400
xfs_ilock: flags ILOCK_EXCL caller xfs_iomap_write_delay
xfs_delalloc_enospc: isize 0x180000 disize 0x180000 offset 0x180400 count 512
And failing the retry, giving a real ENOSPC error.
xfs_ilock: flags ILOCK_EXCL caller xfs_vm_write_failed
^^^^^^^^^^^^^^^^^^^
The smoking gun - the write being failed and cleaning up delalloc
blocks beyond EOF allocated by the failed write.
xfs_getattr:
xfs_ilock: flags IOLOCK_SHARED caller xfs_getbmap
xfs_ilock: flags ILOCK_SHARED caller xfs_ilock_map_shared
And that's where we died almost immediately afterwards.
xfs_bmapi_read() found delalloc extent beyond current file in memory
file size. Some debug I added to xfs_getbmap() showed the state just
before the assert failure:
ino 0x80e48: off 0xc00, fsb 0xffffffffffffffff, len 0x1, size 0x180000
start_fsb 0x106, end_fsb 0x638
ino flags 0x2 nex 0xd bmvcnt 0x555, len 0x3c58a6f23c0bf1, start 0xc00
ext 0: off 0x1fc, fsb 0x24782, len 0x254
ext 1: off 0x450, fsb 0x40851, len 0x30
ext 2: off 0x480, fsb 0xd99, len 0x1b8
ext 3: off 0x92f, fsb 0x4099a, len 0x3b
ext 4: off 0x96d, fsb 0x41844, len 0x98
ext 5: off 0xbf1, fsb 0x408ab, len 0xf
which shows that we found a single delalloc block beyond EOF (first
line of output) when we were returning the map for a length
somewhere around 10^16 bytes long (second line), and the on-disk
extents showed they didn't go past EOF (last lines).
Further debug added to xfs_vm_write_failed() showed this happened
when punching out delalloc blocks beyond the end of the file after
the failed write:
[ 132.606693] ino 0x80e48: vwf to 0x181000, sze 0x180000
[ 132.609573] start_fsb 0xc01, end_fsb 0xc08
It punched the range 0xc01 -> 0xc08, but the range we really need to
punch is 0xc00 -> 0xc07 (8 blocks from 0xc00) as this testing was
run on a 512 byte block size filesystem (8 blocks per page).
the punch from is 0xc00. So end_fsb is correct, but start_fsb is
wrong as we punch from start_fsb for (end_fsb - start_fsb) blocks.
Hence we are not punching the delalloc block beyond EOF in the case.
The fix is simple - it's a silly off-by-one mistake in calculating
the range. It's especially silly because the macro used to calculate
the start_fsb already takes into account the case where the inode
size is an exact multiple of the filesystem block size...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For the direct IO write path, we only really need the ilock to be taken in
exclusive mode during IO submission if we need to do extent allocation
instead of all the time.
Change the block mapping code to take the ilock in shared mode for the
initial block mapping, and only retake it exclusively when we actually
have to perform extent allocations. We were already dropping the ilock
for the transaction allocation, so this doesn't introduce new race windows.
Based on an earlier patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Instead of calling xfs_zero_eof with the ilock held only take it internally
for the minimall required critical section around xfs_bmapi_read. This
also requires changing the calling convention for xfs_zero_last_block
slightly. The actual zeroing operation is still serialized by the iolock,
which must be taken exclusively over the call to xfs_zero_eof.
We could in fact use a shared lock for the xfs_bmapi_read calls as long as
the extent list has been read in, but given that we already hold the iolock
exclusively there is little reason to micro optimize this further.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We do not need the ilock for most checks done in the beginning of
xfs_setattr_size. Replace the long critical section before starting the
transaction with a smaller one around xfs_zero_eof and an optional one
inside xfs_qm_dqattach that isn't entered unless using quotas. While
this isn't a big optimization for xfs_setattr_size itself it will allow
pushing the ilock into xfs_zero_eof itself later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
We do not need the ilock for generic_write_checks and the i_size_read,
which are protected by i_mutex and/or iolock, so reduce the ilock
critical section to just the call to xfs_zero_eof.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Check if we actually need to attach a dquot before taking the ilock in
xfs_qm_dqattach. This avoid superflous lock roundtrips for the common cases
of quota support compiled in but not activated on a filesystem and an
inode that already has the dquots attached.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This patch (as1554) fixes a lockdep false-positive report. The
problem arises because lockdep is unable to deal with the
tree-structured locks created by the device core and sysfs.
This particular problem involves a sysfs attribute method that
unregisters itself, not from the device it was called for, but from a
descendant device. Lockdep doesn't understand the distinction and
reports a possible deadlock, even though the operation is safe.
This is the sort of thing that would normally be handled by using a
nested lock annotation; unfortunately it's not feasible to do that
here. There's no sensible way to tell sysfs when attribute removal
occurs in the context of a parent attribute method.
As a workaround, the patch adds a new flag to struct attribute
telling sysfs not to inform lockdep when it acquires a readlock on a
sysfs_dirent instance for the attribute. The readlock is still
acquired, but lockdep doesn't know about it and hence does not
complain about impossible deadlock scenarios.
Also added are macros for static initialization of attribute
structures with the ignore_lockdep flag set. The three offending
attributes in the USB subsystem are converted to use the new macros.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tejun Heo <tj@kernel.org>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a lock ordering deadlock in JFFS2
- Fix an oops in the dataflash driver, triggered by a dummy call to test
whether it has OTP functionality.
- Fix request_mem_region() failure on amsdelta NAND driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAk+vekgACgkQdwG7hYl686N8bQCfdizsFrliKbDW20R/pO66NoAV
aloAn0ln+mwe3rIdNt8qKynW8e8dbudF
=R7XS
-----END PGP SIGNATURE-----
Merge tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtd
Pull three MTD fixes from David Woodhouse:
- Fix a lock ordering deadlock in JFFS2
- Fix an oops in the dataflash driver, triggered by a dummy call to test
whether it has OTP functionality.
- Fix request_mem_region() failure on amsdelta NAND driver.
* tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtd:
mtd: ams-delta: fix request_mem_region() failure
jffs2: Fix lock acquisition order bug in gc path
mtd: fix oops in dataflash driver
* pm-sleep:
PM / Sleep: User space wakeup sources garbage collector Kconfig option
PM / Sleep: Make the limit of user space wakeup sources configurable
PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo
PM / Sleep: Fix a mistake in a conditional in autosleep_store()
epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready
PM / Sleep: Add user space interface for manipulating wakeup sources, v3
PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources
PM / Sleep: Implement opportunistic sleep, v2
PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
PM / Sleep: Change wakeup source statistics to follow Android
PM / Sleep: Use wait queue to signal "no wakeup events in progress"
PM / Sleep: Look for wakeup events in later stages of device suspend
PM / Hibernate: Hibernate/thaw fixes/improvements
The number of bio_get_nr_vecs() is passed down via bio_alloc() to
bvec_alloc_bs(), which fails the bio allocation if
nr_iovecs > BIO_MAX_PAGES. For the underlying caller this causes an
unexpected bio allocation failure.
Limiting to queue_max_segments() is not sufficient, as max_segments
also might be very large.
bvec_alloc_bs(gfp_mask, nr_iovecs, ) => NULL when nr_iovecs > BIO_MAX_PAGES
bio_alloc_bioset(gfp_mask, nr_iovecs, ...)
bio_alloc(GFP_NOIO, nvecs)
xfs_alloc_ioend_bio()
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hi,
We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk. It can
easily be reproduced by doing the following:
[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s
In dmesg, you'll find the following:
squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 43.106012] attempt to access beyond end of device
[ 43.106029] loop0: rw=0, want=277410, limit=277408
[ 43.106039] Buffer I/O error on device loop0, logical block 138704
[ 43.106053] attempt to access beyond end of device
[ 43.106057] loop0: rw=0, want=277412, limit=277408
[ 43.106061] Buffer I/O error on device loop0, logical block 138705
[ 43.106066] attempt to access beyond end of device
[ 43.106070] loop0: rw=0, want=277414, limit=277408
[ 43.106073] Buffer I/O error on device loop0, logical block 138706
[ 43.106078] attempt to access beyond end of device
[ 43.106081] loop0: rw=0, want=277416, limit=277408
[ 43.106085] Buffer I/O error on device loop0, logical block 138707
[ 43.106089] attempt to access beyond end of device
[ 43.106093] loop0: rw=0, want=277418, limit=277408
[ 43.106096] Buffer I/O error on device loop0, logical block 138708
[ 43.106101] attempt to access beyond end of device
[ 43.106104] loop0: rw=0, want=277420, limit=277408
[ 43.106108] Buffer I/O error on device loop0, logical block 138709
[ 43.106112] attempt to access beyond end of device
[ 43.106116] loop0: rw=0, want=277422, limit=277408
[ 43.106120] Buffer I/O error on device loop0, logical block 138710
[ 43.106124] attempt to access beyond end of device
[ 43.106128] loop0: rw=0, want=277424, limit=277408
[ 43.106131] Buffer I/O error on device loop0, logical block 138711
[ 43.106135] attempt to access beyond end of device
[ 43.106139] loop0: rw=0, want=277426, limit=277408
[ 43.106143] Buffer I/O error on device loop0, logical block 138712
[ 43.106147] attempt to access beyond end of device
[ 43.106151] loop0: rw=0, want=277428, limit=277408
[ 43.106154] Buffer I/O error on device loop0, logical block 138713
[ 43.106158] attempt to access beyond end of device
[ 43.106162] loop0: rw=0, want=277430, limit=277408
[ 43.106166] attempt to access beyond end of device
[ 43.106169] loop0: rw=0, want=277432, limit=277408
...
[ 43.106307] attempt to access beyond end of device
[ 43.106311] loop0: rw=0, want=277470, limit=2774
Squashfs manages to read in the end block(s) of the disk during the
mount operation. Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped. Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above. I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.
Cheers,
Jeff
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>
--
Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a second attempt at a patch that adds rgrp information to the
block allocation trace point for GFS2. As suggested, the patch was
modified to list the rgrp information _after_ the fields that exist today.
Again, the reason for this patch is to allow us to trace and debug
problems with the block reservations patch, which is still in the works.
We can debug problems with reservations if we can see what block allocations
result from the block reservations. It may also be handy in figuring out
if there are problems in rgrp free space accounting. In other words,
we can use it to track the rgrp and its free space along side the allocations
that are taking place.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It turns out that the "new" parameter to function gfs2_meta_indirect_buffer
was always being passed in as zero. Therefore, this patch eliminates it
and simplifies the function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This allows comparing hash and len in one operation on 64-bit
architectures. Right now only __d_lookup_rcu() takes advantage of this,
since that is the case we care most about.
The use of anonymous struct/unions hides the alternate 64-bit approach
from most users, the exception being a few cases where we initialize a
'struct qstr' with a static initializer. This makes the problematic
cases use a new QSTR_INIT() helper function for that (but initializing
just the name pointer with a "{ .name = xyzzy }" initializer remains
valid, as does just copying another qstr structure).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers do want to check the dentry length, but some of them can
check the length and the hash together, so doing it in dentry_cmp() can
be counter-productive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 12f8ad4b05 ("vfs: clean up __d_lookup_rcu() and dentry_cmp()
interfaces") did the careful ACCESS_ONCE() of the dentry name only for
the word-at-a-time case, even though the issue is generic.
Admittedly I don't really see gcc ever reloading the value in the middle
of the loop, so the ACCESS_ONCE() protects us from a fairly theoretical
issue. But better safe than sorry.
Also, this consolidates the common parts of the word-at-a-time and
bytewise logic, which includes checking the length. We'll be changing
that later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The check for d_unhashed() is not strictly incorrect, but at the same
time it is also not sensible. The actual dentry removal from the dentry
hash chains is totally asynchronous to the __d_lookup_rcu() logic, and
we depend on __d_drop() updating the sequence number to invalidate any
lookup of an unhashed dentry.
So checking d_unhashed() is not incorrect, but it's not useful either:
the code has to work correctly even without it. So just remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc fixes from Andrew Morton.
* emailed from Andrew Morton <akpm@linux-foundation.org>: (8 patches)
MAINTAINERS: add maintainer for LED subsystem
mm: nobootmem: fix sign extend problem in __free_pages_memory()
drivers/leds: correct __devexit annotations
memcg: free spare array to avoid memory leak
namespaces, pid_ns: fix leakage on fork() failure
hugetlb: prevent BUG_ON in hugetlb_fault() -> hugetlb_cow()
mm: fix division by 0 in percpu_pagelist_fraction()
proc/pid/pagemap: correctly report non-present ptes and holes between vmas
Reset the current pagemap-entry if the current pte isn't present, or if
current vma is over. Otherwise pagemap reports last entry again and
again.
Non-present pte reporting was broken in commit 092b50bacd ("pagemap:
introduce data structure for pagemap entry")
Reporting for holes was broken in commit 5aaabe831e ("pagemap: avoid
splitting thp when reading /proc/pid/pagemap")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reported-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test is always true so it means we revalidate the length every
time, which generates more network traffic. When it is SEEK_SET or
SEEK_CUR, then we don't need to revalidate.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Function rename to ensure that the functionality of nfs_unlock_request()
mirrors that of nfs_lock_request(). Then let nfs_unlock_and_release_request()
do the work of what used to be called nfs_unlock_request()...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
We only have two places where we need to grab a reference when trying
to lock the nfs_page. We're better off making that explicit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
We now hold a reference to the nfs_page across the calls to
nfs_set_page_writeback and nfs_end_page_writeback, and that
means we already have a reference to the struct page.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
We have to unlock the nfs_page before we call nfs_end_page_writeback
to avoid races with functions that expect the page to be unlocked
when PG_locked and PG_writeback are not set.
The problem is that nfs_unlock_request also releases the nfs_page,
causing a deadlock if the release of the nfs_open_context
triggers an iput() while the PG_writeback flag is still set...
The solution is to separate the unlocking and release of the nfs_page,
so that we can do the former before nfs_end_page_writeback and the
latter after.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Since even filemap_flush() needs to lock pages that are dirty, we
cannot risk calling it from the state manager context. Therefore,
we need to move the call to filemap_flush() to
nfs_async_inode_return_delegation().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The assumption is that if you are in a situation where you need to
return the delegation, then you should probably stop caching the
data anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we hold a delegation then we know that it should be safe to continue
to cache the data beyond the close(). However since the process that wrote
the data may die after close(), we may still want to send the data to
server before those RPCSEC_GSS credentials expire. We therefore compromise
by starting writeback to the server, but don't wait for completion.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch removes a redundant metadata block check. See description below.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Conflicts:
drivers/net/ethernet/intel/e1000e/param.c
drivers/net/wireless/iwlwifi/iwl-agn-rx.c
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
drivers/net/wireless/iwlwifi/iwl-trans.h
Resolved the iwlwifi conflict with mainline using 3-way diff posted
by John Linville and Stephen Rothwell. In 'net' we added a bug
fix to make iwlwifi report a more accurate skb->truesize but this
conflicted with RX path changes that happened meanwhile in net-next.
In e1000e a conflict arose in the validation code for settings of
adapter->itr. 'net-next' had more sophisticated logic so that
logic was used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Both of these methods perform similar checks; move that code to a helper
so that we can ensure the checks are consistent.
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
This was an ill-conceived feature that has been removed from Ceph. Do
this gracefully:
- reject attempts to specify a preferred_osd via the ioctl
- stop exposing this information via virtual xattrs
- always fill in -1 for requests, in case we talk to an older server
- don't calculate preferred_osd placements/pgids
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
The locking policy is such that the erase_complete_block spinlock is
nested within the alloc_sem mutex. This fixes a case in which the
acquisition order was erroneously reversed. This issue was caught by
the following lockdep splat:
=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.5 #1
-------------------------------------------------------
jffs2_gcd_mtd6/299 is trying to acquire lock:
(&c->alloc_sem){+.+.+.}, at: [<c01f7714>] jffs2_garbage_collect_pass+0x314/0x890
but task is already holding lock:
(&(&c->erase_completion_lock)->rlock){+.+...}, at: [<c01f7708>] jffs2_garbage_collect_pass+0x308/0x890
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&(&c->erase_completion_lock)->rlock){+.+...}:
[<c008bec4>] validate_chain+0xe6c/0x10bc
[<c008c660>] __lock_acquire+0x54c/0xba4
[<c008d240>] lock_acquire+0xa4/0x114
[<c046780c>] _raw_spin_lock+0x3c/0x4c
[<c01f744c>] jffs2_garbage_collect_pass+0x4c/0x890
[<c01f937c>] jffs2_garbage_collect_thread+0x1b4/0x1cc
[<c0071a68>] kthread+0x98/0xa0
[<c000f264>] kernel_thread_exit+0x0/0x8
-> #0 (&c->alloc_sem){+.+.+.}:
[<c008ad2c>] print_circular_bug+0x70/0x2c4
[<c008c08c>] validate_chain+0x1034/0x10bc
[<c008c660>] __lock_acquire+0x54c/0xba4
[<c008d240>] lock_acquire+0xa4/0x114
[<c0466628>] mutex_lock_nested+0x74/0x33c
[<c01f7714>] jffs2_garbage_collect_pass+0x314/0x890
[<c01f937c>] jffs2_garbage_collect_thread+0x1b4/0x1cc
[<c0071a68>] kthread+0x98/0xa0
[<c000f264>] kernel_thread_exit+0x0/0x8
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&c->erase_completion_lock)->rlock);
lock(&c->alloc_sem);
lock(&(&c->erase_completion_lock)->rlock);
lock(&c->alloc_sem);
*** DEADLOCK ***
1 lock held by jffs2_gcd_mtd6/299:
#0: (&(&c->erase_completion_lock)->rlock){+.+...}, at: [<c01f7708>] jffs2_garbage_collect_pass+0x308/0x890
stack backtrace:
[<c00155dc>] (unwind_backtrace+0x0/0x100) from [<c0463dc0>] (dump_stack+0x20/0x24)
[<c0463dc0>] (dump_stack+0x20/0x24) from [<c008ae84>] (print_circular_bug+0x1c8/0x2c4)
[<c008ae84>] (print_circular_bug+0x1c8/0x2c4) from [<c008c08c>] (validate_chain+0x1034/0x10bc)
[<c008c08c>] (validate_chain+0x1034/0x10bc) from [<c008c660>] (__lock_acquire+0x54c/0xba4)
[<c008c660>] (__lock_acquire+0x54c/0xba4) from [<c008d240>] (lock_acquire+0xa4/0x114)
[<c008d240>] (lock_acquire+0xa4/0x114) from [<c0466628>] (mutex_lock_nested+0x74/0x33c)
[<c0466628>] (mutex_lock_nested+0x74/0x33c) from [<c01f7714>] (jffs2_garbage_collect_pass+0x314/0x890)
[<c01f7714>] (jffs2_garbage_collect_pass+0x314/0x890) from [<c01f937c>] (jffs2_garbage_collect_thread+0x1b4/0x1cc)
[<c01f937c>] (jffs2_garbage_collect_thread+0x1b4/0x1cc) from [<c0071a68>] (kthread+0x98/0xa0)
[<c0071a68>] (kthread+0x98/0xa0) from [<c000f264>] (kernel_thread_exit+0x0/0x8)
This was introduce in '81cfc9f jffs2: Fix serious write stall due to erase'.
Cc: stable@kernel.org [2.6.37+]
Signed-off-by: Josh Cartwright <joshc@linux.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Admittedly this is something that the compiler should be able to just do
for us, but gcc just isn't that smart. And trying to use a structure
initializer (which would get us the right semantics) ends up resulting
in gcc allocating stack space for _two_ 'struct stat', and then copying
one into the other.
So do it by hand - just have a per-architecture macro that initializes
the padding fields. And if the architecture doesn't provide one, fall
back to the old behavior of just doing the whole memset() first.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's an unreadable mess of 32-bit vs 64-bit #ifdef's that mostly follow
a rather simple pattern.
Make a helper #define to handle that pattern, in the process making the
code both shorter and more readable.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull btrfs fixes from Chris Mason:
"The big ones here are a memory leak we introduced in rc1, and a
scheduling while atomic if the transid on disk doesn't match the
transid we expected. This happens for corrupt blocks, or out of date
disks.
It also fixes up the ioctl definition for our ioctl to resolve logical
inode numbers. The __u32 was a merging error and doesn't match what
we ship in the progs."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: avoid sleeping in verify_parent_transid while atomic
Btrfs: fix crash in scrub repair code when device is missing
btrfs: Fix mismatching struct members in ioctl.h
Btrfs: fix page leak when allocing extent buffers
Btrfs: Add properly locking around add_root_to_dirty_list
verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.
But, a few callers are using it with spinlocks held. Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case. This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Doing iput() from flusher thread (writeback_sb_inodes()) can create problems
because iput() can do a lot of work - for example truncate the inode if it's
the last iput on unlinked file. Some filesystems depend on flusher thread
progressing (e.g. because they need to flush delay allocated blocks to reduce
allocation uncertainty) and so flusher thread doing truncate creates
interesting dependencies and possibilities for deadlocks.
We get rid of iput() in flusher thread by using the fact that I_SYNC inode
flag effectively pins the inode in memory. So if we take care to either hold
i_lock or have I_SYNC set, we can get away without taking inode reference
in writeback_sb_inodes().
As a side effect of these changes, we also fix possible use-after-free in
wb_writeback() because inode_wait_for_writeback() call could try to reacquire
i_lock on the inode that was already free.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Currently, I_SYNC can never be set when evict_inode() (and thus
end_writeback()) is called because flusher thread holds inode reference while
inode is under writeback. As a result inode_sync_wait() in those places
currently does nothing. However that is going to change and unveils problems
with calling inode_sync_wait() from end_writeback(). Several filesystems call
end_writeback() after they have deleted the inode (btrfs, gfs2, ...) and other
filesystems (ext3, ext4, reiserfs, ...) can deadlock when waiting for I_SYNC
because they call end_writeback() from within a transaction.
To avoid these issues, we move inode_sync_wait() into evict_inode() before
calling ->evict_inode(). That way we preserve the current property that
->evict_inode() and writeback never run in parallel and all filesystems are
safe.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
The code in writeback_single_inode() is relatively complex. The list requeing
logic makes sense only for flusher thread but not really for sync_inode() or
write_inode_now() callers. Also when we want to get rid of inode references
held by flusher thread, we will need a special I_SYNC handling there.
So separate part of writeback_single_inode() which does the real writeback work
into __writeback_single_inode() and make writeback_single_inode() do only stuff
necessary for callers writing only one inode, moving the special list handling
into writeback_sb_inodes(). As a sideeffect this fixes a possible race where we
could skip some inode during sync(2) because other writer refiled it from b_io
to b_dirty list. Also I_SYNC handling is moved into the callers of
__writeback_single_inode() to make locking easier.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
writeback_single_inode() doesn't need wb->list_lock for anything on entry now.
So remove the requirement. This makes locking of writeback_single_inode()
temporarily awkward (entering with i_lock, returning with i_lock and
wb->list_lock) but it will be sanitized in the next patch.
Also inode_wait_for_writeback() doesn't need wb->list_lock for anything. It was
just taking it to make usage convenient for callers but with
writeback_single_inode() changing it's not very convenient anymore. So remove
the lock from that function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Move inode requeueing after inode has been written out into a separate
function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Instead of clearing I_DIRTY_PAGES and resetting it when we didn't succeed in
writing them all, just clear the bit only when we succeeded writing all the
pages. We also move the clearing of the bit close to other i_state handling to
separate it from writeback list handling. This is desirable because list
handling will differ for flusher thread and other writeback_single_inode()
callers in future. No filesystem plays any tricks with I_DIRTY_PAGES (like
checking it in ->writepages or ->write_inode implementation) so this movement
is safe.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
When writeback_single_inode() is called on inode which has I_SYNC already
set while doing WB_SYNC_NONE, inode is moved to b_more_io list. However
this makes sense only if the caller is flusher thread. For other callers of
writeback_single_inode() it doesn't really make sense and may be even wrong
- flusher thread may be doing WB_SYNC_ALL writeback in parallel.
So we move requeueing from writeback_single_inode() to writeback_sb_inodes().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Move clearing of I_SYNC into inode_sync_complete(). It is more logical to have
clearing of I_SYNC bit and waking of waiters in one place. Also later we will
have two places needing to clear I_SYNC and wake up waiters so this allows them
to use the common helper. Moving of I_SYNC clearing to a later stage of
writeback_single_inode() is safe since we hold i_lock all the time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
When an epoll_event, that has the EPOLLWAKEUP flag set, is ready, a
wakeup_source will be active to prevent suspend. This can be used to
handle wakeup events from a driver that support poll, e.g. input, if
that driver wakes up the waitqueue passed to epoll before allowing
suspend.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The calling conventions for __d_lookup_rcu() and dentry_cmp() are
annoying in different ways, and there is actually one single underlying
reason for both of the annoyances.
The fundamental reason is that we do the returned dentry sequence number
check inside __d_lookup_rcu() instead of doing it in the caller. This
results in two annoyances:
- __d_lookup_rcu() now not only needs to return the dentry and the
sequence number that goes along with the lookup, it also needs to
return the inode pointer that was validated by that sequence number
check.
- and because we did the sequence number check early (to validate the
name pointer and length) we also couldn't just pass the dentry itself
to dentry_cmp(), we had to pass the counted string that contained the
name.
So that sequence number decision caused two separate ugly calling
conventions.
Both of these problems would be solved if we just did the sequence
number check in the caller instead. There's only one caller, and that
caller already has to do the sequence number check for the parent
anyway, so just do that.
That allows us to stop returning the dentry->d_inode in that in-out
argument (pointer-to-pointer-to-inode), so we can make the inode
argument just a regular input inode pointer. The caller can just load
the inode from dentry->d_inode, and then do the sequence number check
after that to make sure that it's synchronized with the name we looked
up.
And it allows us to just pass in the dentry to dentry_cmp(), which is
what all the callers really wanted. Sure, dentry_cmp() has to be a bit
careful about the dentry (which is not stable during RCU lookup), but
that's actually very simple.
And now that dentry_cmp() can clearly see that the first string argument
is a dentry, we can use the direct word access for that, instead of the
careful unaligned zero-padding. The dentry name is always properly
aligned, since it is a single path component that is either embedded
into the dentry itself, or was allocated with kmalloc() (see __d_alloc).
Finally, this also uninlines the nasty slow-case for dentry comparisons:
that one *does* need to do a sequence number check, since it will call
in to the low-level filesystems, and we want to give those a stable
inode pointer and path component length/start arguments. Doing an extra
sequence check for that slow case is not a problem, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ec81aecb29 ("hfs: fix a potential buffer overflow") fixed a few
potential buffer overflows in the hfs filesystem. But as Timo Warns
pointed out, these changes also need to be made on the hfsplus
filesystem as well.
Reported-by: Timo Warns <warns@pre-sense.de>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Sage Weil <sage@newdream.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull CIFS fixes from Steve French.
* git://git.samba.org/sfrench/cifs-2.6:
fs/cifs: fix parsing of dfs referrals
cifs: make sure we ignore the credentials= and cred= options
[CIFS] Update cifs version to 1.78
cifs - check S_AUTOMOUNT in revalidate
cifs: add missing initialization of server->req_lock
cifs: don't cap ra_pages at the same level as default_backing_dev_info
CIFS: Fix indentation in cifs_show_options
Fix that when scrub tries to repair an I/O or checksum error and one of
the devices containing the mirror is missing, it crashes in bio_add_page
because the bdev is a NULL pointer for missing devices.
Reported-by: Marco L. Crociani <marco.crociani@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Fix the size members of btrfs_ioctl_ino_path_args and
btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used
__u64 and the kernel headers used __u32 before.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we happen to alloc a extent buffer and then alloc a page and notice that
page is already attached to an extent buffer, we will only unlock it and
free our existing eb. Any pages currently attached to that eb will be
properly freed, but we don't do the page_cache_release() on the page where
we noticed the other extent buffer which can cause us to leak pages and I
hope cause the weird issues we've been seeing in this area. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
add_root_to_dirty_list happens once at the very beginning of the
transaction, but it is still racey.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Fix the following sparse warnings:
fs/nfs/direct.c:221:6: warning: symbol 'nfs_direct_readpage_release' was
not declared. Should it be static?
fs/nfs/read.c:38:43: warning: non-ANSI function declaration of function
'nfs_readhdr_alloc'
fs/nfs/objlayout/objio_osd.c:214:5: warning: symbol '__alloc_objio_seg'
was not declared. Should it be static?
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Fix the following compile warnings:
fs/nfs/direct.c: In function 'nfs_direct_read_schedule_segment':
fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:352:27: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c: In function 'nfs_direct_write_schedule_segment':
fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:650:27: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
This cleans up the mode setting code when creating inodes. The
SGID bit was being reset by setattr_copy() when the user creating a
subdirectory was not in the owning group. When ACLs are in use this
SGID bit should have been propagated if the ACL allows creation of
a subdirectory. GFS2's behaviour now matches that of the other ACL
supporting filesystems in this regard.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The problem was that the first referral was parsed more than once
and so the caller tried the same referrals multiple times.
The problem was introduced partly by commit
066ce68994,
where 'ref += le16_to_cpu(ref->Size);' got lost,
but that was also wrong...
Cc: <stable@vger.kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Björn Jacke <bj@sernet.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJPnb50AAoJEHm+PkMAQRiGAE0H/A4zFZIUGmF3miKPDYmejmrZ
oVDYxVAu6JHjHWhu8E3VsinvyVscowjV8dr15eSaQzmDmRkSHAnUQ+dB7Di7jLC2
MNopxsWjwyZ8zvvr3rFR76kjbWKk/1GYytnf7GPZLbJQzd51om2V/TY/6qkwiDSX
U8Tt7ihSgHAezefqEmWp2X/1pxDCEt+VFyn9vWpkhgdfM1iuzF39MbxSZAgqDQ/9
JJrBHFXhArqJguhENwL7OdDzkYqkdzlGtS0xgeY7qio2CzSXxZXK4svT6FFGA8Za
xlAaIvzslDniv3vR2ZKd6wzUwFHuynX222hNim3QMaYdXm012M+Nn1ufKYGFxI0=
=4d4w
-----END PGP SIGNATURE-----
Merge tag 'v3.4-rc5' into next
Linux 3.4-rc5
Merge to pull in prerequisite change for Smack:
86812bb0de
Requested by Casey.
It turns out that there are more cases than CONFIG_DEBUG_PAGEALLOC that
can have holes in the kernel address space: it seems to happen easily
with Xen, and it looks like the AMD gart64 code will also punch holes
dynamically.
Actually hitting that case is still very unlikely, so just do the
access, and take an exception and fix it up for the very unlikely case
of it being a page-crosser with no next page.
And hey, this abstraction might even help other architectures that have
other issues with unaligned word accesses than the possible missing next
page. IOW, this could do the byte order magic too.
Peter Anvin fixed a thinko in the shifting for the exception case.
Reported-and-tested-by: Jana Saout <jana@saout.de>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Older mount.cifs programs passed this on to the kernel after parsing
the file. Make sure the kernel ignores that option.
Should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=43195
Cc: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Ronald <ronald645@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When revalidating a dentry, if the inode wasn't known to be a dfs
entry when the dentry was instantiated, such as when created via
->readdir(), the DCACHE_NEED_AUTOMOUNT flag needs to be set on the
dentry in ->d_revalidate().
The false return from cifs_d_revalidate(), due to the inode now
being marked with the S_AUTOMOUNT flag, might not invalidate the
dentry if there is a concurrent unlazy path walk. This is because
the dentry reference count will be at least 2 in this case causing
d_invalidate() to return EBUSY. So the asumption that the dentry
will be discarded then correctly instantiated via ->lookup() might
not hold.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Steve French <smfrench@gmail.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <sfrench@us.ibm.com>
Remove CONFIG_UBIFS_FS_XATTR configuration option and associated
UBIFS_FS_XATTR ifdefs.
Testing:
Tested using integck while using nandsim on x86 & MX28 based
platform with Micron MT29F2G08ABAEAH4 nand.
Signed-off-by: Subodh Nijsure <snijsure@grid-net.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
"heap" is initialized twice. I removed the first one, because it makes
Smatch complain that we use "new_cat" as an offset before checking it.
This doesn't change how the code works, it's just a cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
The conversion of all of the users is not done yet there are too many to change
in one go and leave the code reviewable. For now I change just the header and
a few trivial users and rely on CONFIG_UIDGID_STRICT_TYPE_CHECKS not being set
to ensure that the code will still compile during the transition.
Helper functions i_uid_read, i_uid_write, i_gid_read, i_gid_write are added
so that in most cases filesystems can avoid the complexities of multiple user
namespaces and can concentrate on moving their raw numeric values into and
out of the vfs data structures.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Use uid_eq when comparing kuids
Use gid_eq when comparing kgids
- Use make_kuid(user_ns, 0) to talk about the user_namespace root uid
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
cred.h and a few trivial users of struct cred are changed. The rest of the users
of struct cred are left for other patches as there are too many changes to make
in one go and leave the change reviewable. If the user namespace is disabled and
CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile
and behave correctly.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
As a first step to converting struct cred to be all kuid_t and kgid_t
values convert the group values stored in group_info to always be
kgid_t values. Unless user namespaces are used this change should
have no effect.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Since no one using "dup_name", removed it completely in sysfs_rename.
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Journal recovery from lock_dlm should not be ignored
if there is an unmount in progress. Ignoring it will
causes the recovery to get stuck. The recovery
process will correctly handle an in-progess unmount.
Signed-off-by: David Teigland <teigland@redhat.com>
The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used. This commit
fixes a number of problems, making nodir much more usable.
- Major change to recovery: recover all locks and restart
all in-progress operations after recovery. In some
cases it's not possible to know which in-progess locks
to recover, so recover all. (Most require recovery
in nodir mode anyway since rehashing changes most
master nodes.)
- Change the way nodir mode is enabled, from a command
line mount arg passed through gfs2, into a sysfs
file managed by dlm_controld, consistent with the
other config settings.
- Allow recovering MSTCPY locks on an rsb that has not
yet been turned into a master copy.
- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
from a previous, aborted recovery cycle. Base this
on the local recovery status not being in the state
where any nodes should be sending LOCK messages for the
current recovery cycle.
- Hold rsb lock around dlm_purge_mstcpy_locks() because it
may run concurrently with dlm_recover_master_copy().
- Maintain highbast on process-copy lkb's (in addition to
the master as is usual), because the lkb can switch
back and forth between being a master and being a
process copy as the master node changes in recovery.
- When recovering MSTCPY locks, flag rsb's that have
non-empty convert or waiting queues for granting
at the end of recovery. (Rename flag from LOCKS_PURGED
to RECOVER_GRANT and similar for the recovery function,
because it's not only resources with purged locks
that need grant a grant attempt.)
- Replace a couple of unnecessary assertion panics with
error messages.
Signed-off-by: David Teigland <teigland@redhat.com>
Highlights include:
- Fixes for the NFSv4 security negotiation
- Use the correct hostname when mounting from a private namespace
- NFS net namespace bugfixes for the pipefs filesystem
- NFSv4 GETACL bugfixes
- IPv6 bugfix for NFSv4 referrals
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=vLBv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fixes for the NFSv4 security negotiation
- Use the correct hostname when mounting from a private namespace
- NFS net namespace bugfixes for the pipefs filesystem
- NFSv4 GETACL bugfixes
- IPv6 bugfix for NFSv4 referrals
* tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.1: Use the correct hostname in the client identifier string
SUNRPC: RPC client must use the current utsname hostname string
NFS: get module in idmap PipeFS notifier callback
NFS: Remove unused function nfs_lookup_with_sec()
NFS: Honor the authflavor set in the clone mount data
NFS: Fix following referral mount points with different security
NFS: Do secinfo as part of lookup
NFS: Handle exceptions coming out of nfs4_proc_fs_locations()
NFS: Fix SECINFO_NO_NAME
SUNRPC: traverse clients tree on PipeFS event
SUNRPC: set per-net PipeFS superblock before notification
SUNRPC: skip clients with program without PipeFS entries
SUNRPC: skip dead but not buried clients on PipeFS events
Avoid beyond bounds copy while caching ACL
Avoid reading past buffer when calling GETACL
fix page number calculation bug for block layout decode buffer
NFSv4.1 fix page number calculation bug for filelayout decode buffers
pnfs-obj: Remove unused variable from objlayout_get_deviceinfo()
nfs4: fix referrals on mounts that use IPv6 addrs
This patch eliminates the gfs2_log_element data structure and
rolls its two components into the gfs2_bufdata. This makes the code
easier to understand and makes it easier to migrate to a rbtree
to keep the list sorted.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
While testing, I've found that even when we are able to negotiate a
much larger rsize with the server, on-the-wire reads often end up being
capped at 128k because of ra_pages being capped at that level.
Lifting this restriction gave almost a twofold increase in sequential
read performance on my craptactular KVM test rig with a 1M rsize.
I think this is safe since the actual ra_pages that the VM requests
is run through max_sane_readahead() prior to submitting the I/O. Under
memory pressure we should end up with large readahead requests being
suppressed anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Trivial patch which fixes a misplaced tab in cifs_show_options().
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
While the use of READDIRPLUS is significantly more efficient than
READDIR followed by many LOOKUP calls, it is still less efficient
than just READDIR if the attributes are not required.
This patch tracks when lookups are attempted on the directory,
and uses that information to selectively disable READDIRPLUS
on that directory.
The first 'readdir' call is always served using READDIRPLUS.
Subsequent calls only use READDIRPLUS if there was a successful
lookup or revalidation on a child in the mean time.
Credit for the original idea should go to Neil Brown. See:
http://www.spinics.net/lists/linux-nfs/msg19996.html
However, the implementation in this patch differs from Neil's
in that it focuses on tracking lookups rather than calls to
stat().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Neil Brown <neilb@suse.de>
No attributes are supposed to change during a COMMIT call, so there
is no need to request post-op attributes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't need cache consistency information when we're doing O_DIRECT
writes. Ditto for the case of delegated writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Get rid of the post-op GETATTR on the directory in order to reduce
the amount of processing done on the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Get rid of the post-op GETATTR on the directory in order to reduce
the amount of processing done on the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Get rid of the post-op GETATTR on the directory in order to reduce
the amount of processing done on the server.
The cost is that if we later need to stat() the directory, then we
know that the ctime and mtime are likely to be invalid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that NFSv2 and NFSv3 have simulated change attributes,
instead of using all three of mtime, ctime and change attribute to
manage data cache consistency, we can simplify the code to just use
the change attribute.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the inode is being initialised, there is no point in
setting flags such as NFS_INO_INVALID_ACCESS,
NFS_INO_INVALID_ACL or NFS_INO_INVALID_DATA since there are
no cached access calls, acls or data caches to invalidate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to retrieve cache consistency attributes before
anyone else has a chance to change the inode, we need to
put the GETATTR op _before_ the DELEGRETURN op.
We can then use that as part of a 'nfs_post_op_update_inode_force_wcc()'
call, to ensure that we update the attributes without clearing our
cached data.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
