The patch "Btrfs: fix protection between send and root deletion"
(18f687d538) does not actually prevent to delete the snapshot
and just takes care during background cleaning, but this seems rather
user unfriendly, this patch implements the idea presented in
http://www.spinics.net/lists/linux-btrfs/msg30813.html
- add an internal root_item flag to denote a dead root
- check if the send_in_progress is set and refuse to delete, otherwise
set the flag and proceed
- check the flag in send similar to the btrfs_root_readonly checks, for
all involved roots
The root lookup in send via btrfs_read_fs_root_no_name will check if the
root is really dead or not. If it is, ENOENT, aborted send. If it's
alive, it's protected by send_in_progress, send can continue.
CC: Miao Xie <miaox@cn.fujitsu.com>
CC: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This ioctl provides basic info about the filesystem that can be obtained
in other ways (eg. sysfs), there's no reason to restrict it to
CAP_SYSADMIN.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This ioctl provides basic info about the devices that can be obtained in
other ways (eg. sysfs), there's no reason to restrict it to
CAP_SYSADMIN.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Provide the basic information about filesystem through the ioctl:
* b-tree node size (same as leaf size)
* sector size
* expected alignment of CLONE_RANGE and EXTENT_SAME ioctl arguments
Backward compatibility: if the values are 0, kernel does not provide
this information, the applications should ignore them.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull two btrfs fixes from Chris Mason:
"This has two fixes that we've been testing for 3.16, but since both
are safe and fix real bugs, it makes sense to send for 3.15 instead"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: send, fix incorrect ref access when using extrefs
Btrfs: fix EIO on reading file after ioctl clone works on it
For inline data extent, we need to make its length aligned, otherwise,
we can get a phantom extent map which confuses readpages() to return -EIO.
This can be detected by xfstests/btrfs/035.
Reported-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: limit the path size in send to PATH_MAX
Btrfs: correctly set profile flags on seqlock retry
Btrfs: use correct key when repeating search for extent item
Btrfs: fix inode caching vs tree log
Btrfs: fix possible memory leaks in open_ctree()
Btrfs: avoid triggering bug_on() when we fail to start inode caching task
Btrfs: move btrfs_{set,clear}_and_info() to ctree.h
btrfs: replace error code from btrfs_drop_extents
btrfs: Change the hole range to a more accurate value.
btrfs: fix use-after-free in mount_subvol()
There's a case which clone does not handle and used to BUG_ON instead,
(testcase xfstests/btrfs/035), now returns EINVAL. This error code is
confusing to the ioctl caller, as it normally signifies errorneous
arguments.
Change it to ENOPNOTSUPP which allows a fall back to copy instead of
clone. This does not affect the common reflink operation.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull second set of btrfs updates from Chris Mason:
"The most important changes here are from Josef, fixing a btrfs
regression in 3.14 that can cause corruptions in the extent allocation
tree when snapshots are in use.
Josef also fixed some deadlocks in send/recv and other assorted races
when balance is running"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (23 commits)
Btrfs: fix compile warnings on on avr32 platform
btrfs: allow mounting btrfs subvolumes with different ro/rw options
btrfs: export global block reserve size as space_info
btrfs: fix crash in remount(thread_pool=) case
Btrfs: abort the transaction when we don't find our extent ref
Btrfs: fix EINVAL checks in btrfs_clone
Btrfs: fix unlock in __start_delalloc_inodes()
Btrfs: scrub raid56 stripes in the right way
Btrfs: don't compress for a small write
Btrfs: more efficient io tree navigation on wait_extent_bit
Btrfs: send, build path string only once in send_hole
btrfs: filter invalid arg for btrfs resize
Btrfs: send, fix data corruption due to incorrect hole detection
Btrfs: kmalloc() doesn't return an ERR_PTR
Btrfs: fix snapshot vs nocow writting
btrfs: Change the expanding write sequence to fix snapshot related bug.
btrfs: make device scan less noisy
btrfs: fix lockdep warning with reclaim lock inversion
Btrfs: hold the commit_root_sem when getting the commit root during send
Btrfs: remove transaction from send
...
Introduce a block group type bit for a global reserve and fill the space
info for SPACE_INFO ioctl. This should replace the newly added ioctl
(01e219e806) to get just the 'size' part
of the global reserve, while the actual usage can be now visible in the
'btrfs fi df' output during ENOSPC stress.
The unpatched userspace tools will show the blockgroup as 'unknown'.
CC: Jeff Mahoney <jeffm@suse.com>
CC: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_drop_extents can now return -EINVAL, but only one caller
in btrfs_clone was checking for it. This adds it to the
caller for inline extents, which is where we really need it.
Signed-off-by: Chris Mason <clm@fb.com>
Originally following cmds will work:
# btrfs fi resize -10A <mnt>
# btrfs fi resize -10Gaha <mnt>
Filter the arg by checking the return pointer of memparse.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The error handling was copy and pasted from memdup_user(). It should be
checking for NULL obviously.
Fixes: abccd00f8a ('btrfs: Fix 32/64-bit problem with BTRFS_SET_RECEIVED_SUBVOL ioctl')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs changes from Chris Mason:
"This is a pretty long stream of bug fixes and performance fixes.
Qu Wenruo has replaced the btrfs async threads with regular kernel
workqueues. We'll keep an eye out for performance differences, but
it's nice to be using more generic code for this.
We still have some corruption fixes and other patches coming in for
the merge window, but this batch is tested and ready to go"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
Btrfs: fix a crash of clone with inline extents's split
btrfs: fix uninit variable warning
Btrfs: take into account total references when doing backref lookup
Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
Btrfs: fix incremental send's decision to delay a dir move/rename
Btrfs: remove unnecessary inode generation lookup in send
Btrfs: fix race when updating existing ref head
btrfs: Add trace for btrfs_workqueue alloc/destroy
Btrfs: less fs tree lock contention when using autodefrag
Btrfs: return EPERM when deleting a default subvolume
Btrfs: add missing kfree in btrfs_destroy_workqueue
Btrfs: cache extent states in defrag code path
Btrfs: fix deadlock with nested trans handles
Btrfs: fix possible empty list access when flushing the delalloc inodes
Btrfs: split the global ordered extents mutex
Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
Btrfs: reclaim delalloc metadata more aggressively
Btrfs: remove unnecessary lock in may_commit_transaction()
Btrfs: remove the unnecessary flush when preparing the pages
Btrfs: just do dirty page flush for the inode with compression before direct IO
...
xfstests's btrfs/035 triggers a BUG_ON, which we use to detect the split
of inline extents in __btrfs_drop_extents().
For inline extents, we cannot duplicate another EXTENT_DATA item, because
it breaks the rule of inline extents, that is, 'start offset' needs to be 0.
We have set limitations for the source inode's compressed inline extents,
because it needs to decompress and recompress. Now the destination inode's
inline extents also need similar limitations.
With this, xfstests btrfs/035 doesn't run into panic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When finding new extents during an autodefrag, don't do so many fs tree
lookups to find an extent with a size smaller then the target treshold.
Instead, after each fs tree forward search immediately unlock upper
levels and process the entire leaf while holding a read lock on the leaf,
since our leaf processing is very fast.
This reduces lock contention, allowing for higher concurrency when other
tasks want to write/update items related to other inodes in the fs tree,
as we're not holding read locks on upper tree levels while processing the
leaf and we do less tree searches.
Test:
sysbench --test=fileio --file-num=512 --file-total-size=16G \
--file-test-mode=rndrw --num-threads=32 --file-block-size=32768 \
--file-rw-ratio=3 --file-io-mode=sync --max-time=1800 \
--max-requests=10000000000 [prepare|run]
(fileystem mounted with -o autodefrag, averages of 5 runs)
Before this change: 58.852Mb/sec throughtput, read 77.589Gb, written 25.863Gb
After this change: 63.034Mb/sec throughtput, read 83.102Gb, written 27.701Gb
Test machine: quad core intel i5-3570K, 32Gb of RAM, SSD.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
The error message is confusing:
# btrfs sub delete /mnt/mysub/
Delete subvolume '/mnt/mysub'
ERROR: cannot delete '/mnt/mysub' - Directory not empty
The error message does not make sense to me: It's not about deleting a
directory but it's a subvolume, and it doesn't matter if the subvolume is
empty or not.
Maybe EPERM or is more appropriate in this case, combined with an explanatory
kernel log message. (e.g. "subvolume with ID 123 cannot be deleted because
it is configured as default subvolume.")
Reported-by: Koen De Wit <koen.de.wit@oracle.com>
Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When locking file ranges in the inode's io_tree, cache the first
extent state that belongs to the target range, so that when unlocking
the range we don't need to search in the io_tree again, reducing cpu
time and making and therefore holding the io_tree's lock for a shorter
period.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
We needn't flush all delalloc inodes when we doesn't get s_umount lock,
or we would make the tasks wait for a long time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
If the snapshot creation happened after the nocow write but before the dirty
data flush, we would fail to flush the dirty data because of no space.
So we must keep track of when those nocow write operations start and when they
end, if there are nocow writers, the snapshot creators must wait. In order
to implement this function, I introduce btrfs_{start, end}_nocow_write(),
which is similar to mnt_{want,drop}_write().
These two functions are only used for nocow file write operations.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
When using prealloc extents, a file defragment operation may actually
fragment the file and increase the amount of data space used by the file.
This change fixes that behaviour.
Example:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt
$ cd /mnt
$ xfs_io -f -c 'falloc 0 1048576' foobar && sync
$ xfs_io -c 'pwrite -S 0xff -b 100000 5000 100000' foobar
$ xfs_io -c 'pwrite -S 0xac -b 100000 200000 100000' foobar
$ xfs_io -c 'pwrite -S 0xe1 -b 100000 900000 100000' foobar && sync
Before defragmenting the file:
$ btrfs filesystem df /mnt
Data, single: total=8.00MiB, used=1.25MiB
System, DUP: total=8.00MiB, used=16.00KiB
System, single: total=4.00MiB, used=0.00
Metadata, DUP: total=1.00GiB, used=112.00KiB
Metadata, single: total=8.00MiB, used=0.00
$ btrfs-debug-tree /dev/sdb3
(...)
item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
prealloc data disk byte 12845056 nr 1048576
prealloc data offset 0 nr 4096
item 7 key (257 EXTENT_DATA 4096) itemoff 15757 itemsize 53
extent data disk byte 12845056 nr 1048576
extent data offset 4096 nr 102400 ram 1048576
extent compression 0
item 8 key (257 EXTENT_DATA 106496) itemoff 15704 itemsize 53
prealloc data disk byte 12845056 nr 1048576
prealloc data offset 106496 nr 90112
item 9 key (257 EXTENT_DATA 196608) itemoff 15651 itemsize 53
extent data disk byte 12845056 nr 1048576
extent data offset 196608 nr 106496 ram 1048576
extent compression 0
item 10 key (257 EXTENT_DATA 303104) itemoff 15598 itemsize 53
prealloc data disk byte 12845056 nr 1048576
prealloc data offset 303104 nr 593920
item 11 key (257 EXTENT_DATA 897024) itemoff 15545 itemsize 53
extent data disk byte 12845056 nr 1048576
extent data offset 897024 nr 106496 ram 1048576
extent compression 0
item 12 key (257 EXTENT_DATA 1003520) itemoff 15492 itemsize 53
prealloc data disk byte 12845056 nr 1048576
prealloc data offset 1003520 nr 45056
(...)
Now defragmenting the file results in more data space used than before:
$ btrfs filesystem defragment -f foobar && sync
$ btrfs filesystem df /mnt
Data, single: total=8.00MiB, used=1.55MiB
System, DUP: total=8.00MiB, used=16.00KiB
System, single: total=4.00MiB, used=0.00
Metadata, DUP: total=1.00GiB, used=112.00KiB
Metadata, single: total=8.00MiB, used=0.00
And the corresponding file extent items are now no longer perfectly sequential
as before, and we're now needlessly using more space from data block groups:
$ btrfs-debug-tree /dev/sdb3
(...)
item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
extent data disk byte 12845056 nr 1048576
extent data offset 0 nr 4096 ram 1048576
extent compression 0
item 7 key (257 EXTENT_DATA 4096) itemoff 15757 itemsize 53
extent data disk byte 13893632 nr 102400
extent data offset 0 nr 102400 ram 102400
extent compression 0
item 8 key (257 EXTENT_DATA 106496) itemoff 15704 itemsize 53
extent data disk byte 12845056 nr 1048576
extent data offset 106496 nr 90112 ram 1048576
extent compression 0
item 9 key (257 EXTENT_DATA 196608) itemoff 15651 itemsize 53
extent data disk byte 13996032 nr 106496
extent data offset 0 nr 106496 ram 106496
extent compression 0
item 10 key (257 EXTENT_DATA 303104) itemoff 15598 itemsize 53
prealloc data disk byte 12845056 nr 1048576
prealloc data offset 303104 nr 593920
item 11 key (257 EXTENT_DATA 897024) itemoff 15545 itemsize 53
extent data disk byte 14102528 nr 106496
extent data offset 0 nr 106496 ram 106496
extent compression 0
item 12 key (257 EXTENT_DATA 1003520) itemoff 15492 itemsize 53
extent data disk byte 12845056 nr 1048576
extent data offset 1003520 nr 45056 ram 1048576
extent compression 0
(...)
With this change, the above example will no longer cause allocation of new data
space nor change the sequentiality of the file extents, that is, defragment will
be effectless, leaving all extent items pointing to the extent starting at disk
byte 12845056.
In a 20Gb filesystem I had, mounted with the autodefrag option and 20 files of
400Mb each, initially consisting of a single prealloc extent of 400Mb, having
random writes happening at a low rate, lead to a total of over ~17Gb of data
space used, not far from eventually reaching an ENOSPC state.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
When the defrag flag BTRFS_DEFRAG_RANGE_START_IO is set and compression
enabled, we weren't flushing completely, as writing compressed extents
is a 2 steps process, one to compress the data and another one to write
the compressed data to disk.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
The structure for BTRFS_SET_RECEIVED_IOCTL packs differently on 32-bit
and 64-bit systems. This means that it is impossible to use btrfs
receive on a system with a 64-bit kernel and 32-bit userspace, because
the structure size (and hence the ioctl number) is different.
This patch adds a compatibility structure and ioctl to deal with the
above case.
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Josef Bacik <jbacik@fb.com>
EXDEV seems an appropriate error if an operation fails bacause it
crosses file system boundaries.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Pull btrfs fixes from Chris Mason:
"We have a small collection of fixes in my for-linus branch.
The big thing that stands out is a revert of a new ioctl. Users
haven't shipped yet in btrfs-progs, and Dave Sterba found a better way
to export the information"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: use right clone root offset for compressed extents
btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105
Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol
Btrfs: fix max_inline mount option
Btrfs: fix a lockdep warning when cleaning up aborted transaction
Revert "btrfs: add ioctl to export size of global metadata reservation"
This reverts commit 01e219e806.
David Sterba found a different way to provide these features without adding a new
ioctl. We haven't released any progs with this ioctl yet, so I'm taking this out
for now until we finalize things.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
CC: Jeff Mahoney <jeffm@suse.com>
Pull btrfs fixes from Chris Mason:
"This is a small collection of fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix data corruption when reading/updating compressed extents
Btrfs: don't loop forever if we can't run because of the tree mod log
btrfs: reserve no transaction units in btrfs_ioctl_set_features
btrfs: commit transaction after setting label and features
Btrfs: fix assert screwup for the pending move stuff
Added in patch "btrfs: add ioctls to query/change feature bits online"
modifications to superblock don't need to reserve metadata blocks when
starting a transaction.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The set_fslabel ioctl uses btrfs_end_transaction, which means it's
possible that the change will be lost if the system crashes, same for
the newly set features. Let's use btrfs_commit_transaction instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs updates from Chris Mason:
"This is a pretty big pull, and most of these changes have been
floating in btrfs-next for a long time. Filipe's properties work is a
cool building block for inheriting attributes like compression down on
a per inode basis.
Jeff Mahoney kicked in code to export filesystem info into sysfs.
Otherwise, lots of performance improvements, cleanups and bug fixes.
Looks like there are still a few other small pending incrementals, but
I wanted to get the bulk of this in first"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (149 commits)
Btrfs: fix spin_unlock in check_ref_cleanup
Btrfs: setup inode location during btrfs_init_inode_locked
Btrfs: don't use ram_bytes for uncompressed inline items
Btrfs: fix btrfs_search_slot_for_read backwards iteration
Btrfs: do not export ulist functions
Btrfs: rework ulist with list+rb_tree
Btrfs: fix memory leaks on walking backrefs failure
Btrfs: fix send file hole detection leading to data corruption
Btrfs: add a reschedule point in btrfs_find_all_roots()
Btrfs: make send's file extent item search more efficient
Btrfs: fix to catch all errors when resolving indirect ref
Btrfs: fix protection between walking backrefs and root deletion
btrfs: fix warning while merging two adjacent extents
Btrfs: fix infinite path build loops in incremental send
btrfs: undo sysfs when open_ctree() fails
Btrfs: fix snprintf usage by send's gen_unique_name
btrfs: fix defrag 32-bit integer overflow
btrfs: sysfs: list the NO_HOLES feature
btrfs: sysfs: don't show reserved incompat feature
btrfs: call permission checks earlier in ioctls and return EPERM
...
When defragging a very large file, the cluster variable can wrap its 32-bit
signed int type and become negative, which eventually gets passed to
btrfs_force_ra() as a very large unsigned long value. On 32-bit platforms,
this eventually results in an Oops from the SLAB allocator.
Change the cluster and max_cluster signed int variables to unsigned long to
match the readahead functions. This also allows the min() comparison in
btrfs_defrag_file() to work as intended.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The owner and capability checks in IOC_SUBVOL_SETFLAGS and
SET_RECEIVED_SUBVOL should be called before any other checks are done.
Also unify the error code to EPERM.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, any user can snapshot any subvolume if the path is accessible and
thus indirectly create and keep files he does not own under his direcotries.
This is not possible with traditional directories.
In security context, a user can snapshot root filesystem and pin any
potentially buggy binaries, even if the updates are applied.
All the snapshots are visible to the administrator, so it's possible to
verify if there are suspicious snapshots.
Another more practical problem is that any user can pin the space used
by eg. root and cause ENOSPC.
Original report:
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/484786
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we are looking for file extent items that intersect the cloning
range, for each one that falls completely outside the range, don't
release the path and do another full tree search - just move on
to the next slot and copy the file extent item into our buffer only
if the item intersects the cloning range.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
In the clone ioctl, when the source and target inodes are different,
we can acquire their mutexes in 2 possible different orders. After
we're done cloning, we were releasing the mutexes always in the same
order - the most correct way of doing it is to release them by the
reverse order they were acquired.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't have to keep subvolume's block_rsv during transaction commit,
and within transaction commit, we may also need the free space reclaimed
from this block_rsv to process delayed refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This change adds infrastructure to allow for generic properties for
inodes. Properties are name/value pairs that can be associated with
inodes for different purposes. They are stored as xattrs with the
prefix "btrfs."
Properties can be inherited - this means when a directory inode has
inheritable properties set, these are added to new inodes created
under that directory. Further, subvolumes can also have properties
associated with them, and they can be inherited from their parent
subvolume. Naturally, directory properties have priority over subvolume
properties (in practice a subvolume property is just a regular
property associated with the root inode, objectid 256, of the
subvolume's fs tree).
This change also adds one specific property implementation, named
"compression", whose values can be "lzo" or "zlib" and it's an
inheritable property.
The corresponding changes to btrfs-progs were also implemented.
A patch with xfstests for this feature will follow once there's
agreement on this change/feature.
Further, the script at the bottom of this commit message was used to
do some benchmarks to measure any performance penalties of this feature.
Basically the tests correspond to:
Test 1 - create a filesystem and mount it with compress-force=lzo,
then sequentially create N files of 64Kb each, measure how long it took
to create the files, unmount the filesystem, mount the filesystem and
perform an 'ls -lha' against the test directory holding the N files, and
report the time the command took.
Test 2 - create a filesystem and don't use any compression option when
mounting it - instead set the compression property of the subvolume's
root to 'lzo'. Then create N files of 64Kb, and report the time it took.
The unmount the filesystem, mount it again and perform an 'ls -lha' like
in the former test. This means every single file ends up with a property
(xattr) associated to it.
Test 3 - same as test 2, but uses 4 properties - 3 are duplicates of the
compression property, have no real effect other than adding more work
when inheriting properties and taking more btree leaf space.
Test 4 - same as test 3 but with 10 properties per file.
Results (in seconds, and averages of 5 runs each), for different N
numbers of files follow.
* Without properties (test 1)
file creation time ls -lha time
10 000 files 3.49 0.76
100 000 files 47.19 8.37
1 000 000 files 518.51 107.06
* With 1 property (compression property set to lzo - test 2)
file creation time ls -lha time
10 000 files 3.63 0.93
100 000 files 48.56 9.74
1 000 000 files 537.72 125.11
* With 4 properties (test 3)
file creation time ls -lha time
10 000 files 3.94 1.20
100 000 files 52.14 11.48
1 000 000 files 572.70 142.13
* With 10 properties (test 4)
file creation time ls -lha time
10 000 files 4.61 1.35
100 000 files 58.86 13.83
1 000 000 files 656.01 177.61
The increased latencies with properties are essencialy because of:
*) When creating an inode, we now synchronously write 1 more item
(an xattr item) for each property inherited from the parent dir
(or subvolume). This could be done in an asynchronous way such
as we do for dir intex items (delayed-inode.c), which could help
reduce the file creation latency;
*) With properties, we now have larger fs trees. For this particular
test each xattr item uses 75 bytes of leaf space in the fs tree.
This could be less by using a new item for xattr items, instead of
the current btrfs_dir_item, since we could cut the 'location' and
'type' fields (saving 18 bytes) and maybe 'transid' too (saving a
total of 26 bytes per xattr item) from the btrfs_dir_item type.
Also tried batching the xattr insertions (ignoring proper hash
collision handling, since it didn't exist) when creating files that
inherit properties from their parent inode/subvolume, but the end
results were (surprisingly) essentially the same.
Test script:
$ cat test.pl
#!/usr/bin/perl -w
use strict;
use Time::HiRes qw(time);
use constant NUM_FILES => 10_000;
use constant FILE_SIZES => (64 * 1024);
use constant DEV => '/dev/sdb4';
use constant MNT_POINT => '/home/fdmanana/btrfs-tests/dev';
use constant TEST_DIR => (MNT_POINT . '/testdir');
system("mkfs.btrfs", "-l", "16384", "-f", DEV) == 0 or die "mkfs.btrfs failed!";
# following line for testing without properties
#system("mount", "-o", "compress-force=lzo", DEV, MNT_POINT) == 0 or die "mount failed!";
# following 2 lines for testing with properties
system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
system("btrfs", "prop", "set", MNT_POINT, "compression", "lzo") == 0 or die "set prop failed!";
system("mkdir", TEST_DIR) == 0 or die "mkdir failed!";
my ($t1, $t2);
$t1 = time();
for (my $i = 1; $i <= NUM_FILES; $i++) {
my $p = TEST_DIR . '/file_' . $i;
open(my $f, '>', $p) or die "Error opening file!";
$f->autoflush(1);
for (my $j = 0; $j < FILE_SIZES; $j += 4096) {
print $f ('A' x 4096) or die "Error writing to file!";
}
close($f);
}
$t2 = time();
print "Time to create " . NUM_FILES . ": " . ($t2 - $t1) . " seconds.\n";
system("umount", DEV) == 0 or die "umount failed!";
system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
$t1 = time();
system("bash -c 'ls -lha " . TEST_DIR . " > /dev/null'") == 0 or die "ls failed!";
$t2 = time();
print "Time to ls -lha all files: " . ($t2 - $t1) . " seconds.\n";
system("umount", DEV) == 0 or die "umount failed!";
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The local variable 'new_size' comes from userspace. If a large number
was passed, there would be an integer overflow in the following line:
new_size = old_size + new_size;
Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Convert all applicable cases of printk and pr_* to the btrfs_* macros.
Fix all uses of the BTRFS prefix.
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
All the subvolues that are involved in send must be read-only during the
whole operation. The ioctl SUBVOL_SETFLAGS could be used to change the
status to read-write and the result of send stream is undefined if the
data change unexpectedly.
Fix that by adding a refcount for all involved roots and verify that
there's no send in progress during SUBVOL_SETFLAGS ioctl call that does
read-only -> read-write transition.
We need refcounts because there are no restrictions on number of send
parallel operations currently run on a single subvolume, be it source,
parent or one of the multiple clone sources.
Kernel is silent when the RO checks fail and returns EPERM. The same set
of checks is done already in userspace before send starts.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Clean up btrfs_lookup_dentry() to never return NULL, but PTR_ERR(-ENOENT)
instead. This keeps the return value convention consistent.
Callers who use btrfs_lookup_dentry() require a trivial update.
create_snapshot() in particular looks like it can also lose a BUG_ON(!inode)
which is not really needed - there seems less harm in returning ENOENT to
userspace at that point in the stack than there is to crash the machine.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs filesystem df output will show the size of the metadata space
and how much of it is used, and the user assumes that the difference
is all usable space. Since that's not actually the case due to the
global metadata reservation, we should provide the full picture to the
user.
This patch adds an ioctl that exports the size of the global metadata
reservation so that btrfs filesystem df can report it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we have the feature name strings available in the kernel via
the sysfs attributes, we can use them for printing better failure
messages from the ioctl path.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are some feature bits that require no offline setup and can
be enabled online. I've only reviewed extended irefs, but there will
probably be more.
We introduce three new ioctls:
- BTRFS_IOC_GET_SUPPORTED_FEATURES: query the kernel for supported features.
- BTRFS_IOC_GET_FEATURES: query the kernel for enabled features on a per-fs
basis, as well as querying for which features are changeable with mounted.
- BTRFS_IOC_SET_FEATURES: change features on a per-fs basis.
We introduce two new masks per feature set (_SAFE_SET and _SAFE_CLEAR) that
allow us to define which features are safe to change at runtime.
The failure modes for BTRFS_IOC_SET_FEATURES are as follows:
- Enabling a completely unsupported feature: warns and returns -ENOTSUPP
- Enabling a feature that can only be done offline: warns and returns -EPERM
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
* don't assume that ->dest_count won't change between copy_from_user()
and memdup_user()
* use fdget instead of fget
* don't bother comparing superblocks when we'd already compared vfsmounts
* get rid of excessive goto
* use file_inode() instead of open-coding the sucker
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If btrfs_ioctl_snap_destroy blocks on the mutex and the process is
killed, mnt_write count is unbalanced and leads to unmountable
filesystem.
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Heiko Carstens noticed that btrfs was using empty_zero_page
incorrectly. He explained:
The definition of empty_zero_page is architecture specific. It
is (currently) either a character array, an unsigned long
containing the address of the empty_zero_page, or even worse
only the address of the struct page belonging to the
empty_zero_page.
This commit changes btrfs to use a for-loop instead. On x86
the resulting .ko is smaller, and we're no longer worrying about
how each arch builds its zeros.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
rename the function -- btrfs_start_all_delalloc_inodes(), and make its
name be compatible to btrfs_wait_ordered_roots(), since they are always
used at the same place.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is very likely that there are lots of ordered extents in the filesytem,
if we wait for the completion of all of them when we want to reclaim some
space for the metadata space reservation, we would be blocked for a long
time. The performance would drop down suddenly for a long time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Fix spacing issues detected via checkpatch.pl in accordance with the
kernel style guidelines.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Replace kmalloc(size * nr, ) with kmalloc_array(nr, size), thus making
it easier to check is that the calculation doesn't wrap or return a smaller allocation
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove redundant local zero structure, replacing it by the kernel's
global ZERO_PAGE.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
fs/btrfs/compat.h only contained trivial macro wrappers of drop_nlink()
and inc_nlink(). This doesn't belong in mainline.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Use memdup_user rather than duplicating its implementation
This is a little bit restricted to reduce false positives
The semantic patch that makes this report is available
in scripts/coccinelle/api/memdup_user.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
struct btrfs_ioctl_dev_replace_args memory is leaked if replace is
requested on a read-only filesystem. Fix it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is not used for anything.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused parameter, 'eb'. Unused since introduction in
5f39d397df
Updated to be rebased against current upstream and correct diff supplied this time!
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Currently the fs sync function (super.c:btrfs_sync_fs()) doesn't
wait for delayed work to finish before returning success to the
caller. This change fixes this, ensuring that there's no data loss
if a power failure happens right after fs sync returns success to
the caller and before the next commit happens.
Steps to reproduce the data loss issue:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ perl -e '$d = ("\x41" x 6001); open($f,">","/mnt/btrfs/foobar"); print $f $d; close($f);' && btrfs fi sync /mnt/btrfs
Right after the btrfs fi sync command (a second or 2 for example), power
off the machine and reboot it. The file will be empty, as it can be verified
after mounting the filesystem and through btrfs-debug-tree:
$ btrfs-debug-tree /dev/sdb3 | egrep '\(257 INODE_ITEM 0\) itemoff' -B 3 -A 8
item 3 key (256 DIR_INDEX 2) itemoff 3751 itemsize 36
location key (257 INODE_ITEM 0) type FILE
namelen 6 datalen 0 name: foobar
item 4 key (257 INODE_ITEM 0) itemoff 3591 itemsize 160
inode generation 7 transid 7 size 0 block group 0 mode 100644 links 1
item 5 key (257 INODE_REF 256) itemoff 3575 itemsize 16
inode ref index 2 namelen 6 name: foobar
checksum tree key (CSUM_TREE ROOT_ITEM 0)
leaf 29429760 items 0 free space 3995 generation 7 owner 7
fs uuid 6192815c-af2a-4b75-b3db-a959ffb6166e
chunk uuid b529c44b-938c-4d3d-910a-013b4700bcae
uuid tree key (UUID_TREE ROOT_ITEM 0)
After this patch, the data loss no longer happens after a power failure and
btrfs-debug-tree shows:
$ btrfs-debug-tree /dev/sdb3 | egrep '\(257 INODE_ITEM 0\) itemoff' -B 3 -A 8
item 3 key (256 DIR_INDEX 2) itemoff 3751 itemsize 36
location key (257 INODE_ITEM 0) type FILE
namelen 6 datalen 0 name: foobar
item 4 key (257 INODE_ITEM 0) itemoff 3591 itemsize 160
inode generation 6 transid 6 size 6001 block group 0 mode 100644 links 1
item 5 key (257 INODE_REF 256) itemoff 3575 itemsize 16
inode ref index 2 namelen 6 name: foobar
item 6 key (257 EXTENT_DATA 0) itemoff 3522 itemsize 53
extent data disk byte 12845056 nr 8192
extent data offset 0 nr 8192 ram 8192
extent compression 0
checksum tree key (CSUM_TREE ROOT_ITEM 0)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data
back to it's argument struct. Unfortunately, not all architectures provide
__put_user_unaligned(), so compiles break on them if btrfs is selected.
Instead, just copy the whole struct in / out at the start and end of
operations, respectively.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default
subvolume by passing a subvolume id of 0.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it. However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
now threads can return BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS
as defined in btrfs.h for the dev excl operation error in
the FS, which means with this kernel would stop logging
(almost an user error) into the /var/log/messages
v2: accepts Josef' comment
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The handler for the ioctl BTRFS_IOC_FS_INFO was reading the
number of devices before acquiring the device list mutex.
This could lead to inconsistent results because the update of
the device list and the number of devices counter (amongst other
counters related to the device list) are updated in volumes.c
while holding the device list mutex - except for 2 places, one
was volumes.c:btrfs_prepare_sprout() and the other was
volumes.c:device_list_add().
For example, if we have 2 devices, with IDs 1 and 2 and then add
a new device, with ID 3, and while adding the device is in progress
an BTRFS_IOC_FS_INFO ioctl arrives, it could return a number of
devices of 2 and a max dev id of 3. This would be incorrect.
Also, this ioctl handler was reading the fsid while it can be
updated concurrently. This can happen when while a new device is
being added and the current filesystem is in seeding mode.
Example:
$ mkfs.btrfs -f /dev/sdb1
$ mkfs.btrfs -f /dev/sdb2
$ btrfstune -S 1 /dev/sdb1
$ mount /dev/sdb1 /mnt/test
$ btrfs device add /dev/sdb2 /mnt/test
If during the last step a BTRFS_IOC_FS_INFO ioctl was requested, it
could read an fsid that was never valid (some bits part of the old
fsid and others part of the new fsid). Also, it could read a number
of devices that doesn't match the number of devices in the list and
the max device id, as explained before.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Internally, btrfs_header_chunk_tree_uuid() calculates an unsigned long, but
casts it to a pointer, while all callers cast it to unsigned long again.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Internally, btrfs_header_fsid() calculates an unsigned long, but casts
it to a pointer, while all callers cast it to unsigned long again.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
u64 is "unsigned long long" on all architectures now, so there's no need to
cast it when formatting it using the "ll" length modifier.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If you start the replace procedure on a read only filesystem, at
the end the procedure fails to write the updated dev_items to the
chunk tree. The problem is that this error is not indicated except
for a WARN_ON(). If the user now thinks that everything was done
as expected and destroys the source device (with mkfs or with a
hammer). The next mount fails with "failed to read chunk root" and
the filesystem is gone.
This commit adds code to fail the attempt to start the replace
procedure if the filesystem is mounted read-only.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
After we set force_compress with a new value (which was not being done
while holding the inode mutex), if an error happens and we jump to
the label out_ra, the force_compress property of the inode is not set
to BTRFS_COMPRESS_NONE (unlike in the case where no errors happen).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When a new subvolume or snapshot is created, a new UUID item is added
to the UUID tree. Such items are removed when the subvolume is deleted.
The ioctl to set the received subvolume UUID is also touched and will
now also add this received UUID into the UUID tree together with the
ID of the subvolume. The latter is also done when read-only snapshots
are created which inherit all the send/receive information from the
parent subvolume.
User mode programs use the BTRFS_IOC_TREE_SEARCH ioctl to search and
read in the UUID tree.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If the inode ref key was not found and the current leaf slot
was 0 (first item in the leaf) the code would always return
-ENOENT. This was not correct because the desired inode ref
item might be the last item in the previous leaf.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If the path doesn't fit in the input buffer, return ENAMETOOLONG
instead of returning with a success code (0) and a partially
filled and right justified buffer.
Also removed useless buffer pointer check outside the while loop.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Eric pointed out that btrfs will happily allow you to delete the default subvol.
This is a problem obviously since the next time you go to mount the file system
it will freak out because it can't find the root. Fix this by adding a check to
see if our default subvol points to the subvol we are trying to delete, and if
it does not allowing it to happen. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch adds an ioctl, BTRFS_IOC_FILE_EXTENT_SAME which will try to
de-duplicate a list of extents across a range of files.
Internally, the ioctl re-uses code from the clone ioctl. This avoids
rewriting a large chunk of extent handling code.
Userspace passes in an array of file, offset pairs along with a length
argument. The ioctl will then (for each dedupe) do a byte-by-byte comparison
of the user data before deduping the extent. Status and number of bytes
deduped are returned for each operation.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
There's some 250+ lines here that are easily encapsulated into their own
function. I don't change how anything works here, just create and document
the new btrfs_clone() function from btrfs_ioctl_clone() code.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The range locking in btrfs_ioctl_clone is trivially broken out into it's own
function. This reduces the complexity of btrfs_ioctl_clone() by a small bit
and makes that locking code available to future functions in
fs/btrfs/ioctl.c
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_ioctl_get_fslabel() and btrfs_ioctl_set_fslabel()
used root->fs_info->volume_mutex mutex which caused operations
like balance to block set/get label operation until its
completion and generally balance operation takes a long
time to complete, so it will be annoying to the user when
cli appears hung
also this patch will add a bit of optimization within
the btrfs_ioctl_get_falabel() function.
v1->v2:
use fs_info->super_lock instead of uuid_mutex
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.
Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header btrfs_timespec
and other structures.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I recently did some ENOSPC testing that involved filling the disk
while create and removing snapshots in a loop. During the test cycle,
I ran into an ENOSPC when trying to remove a snapshot, leaving the fs
stuck in ENOSPC even after a umount/mount cycle.
This patch allow subvolume removal to fall back onto the global
block reservation in order to succeed when it would have failed
otherwise.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs update from Chris Mason:
"These are the usual mixture of bugs, cleanups and performance fixes.
Miao has some really nice tuning of our crc code as well as our
transaction commits.
Josef is peeling off more and more problems related to early enospc,
and has a number of important bug fixes in here too"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (81 commits)
Btrfs: wait ordered range before doing direct io
Btrfs: only do the tree_mod_log_free_eb if this is our last ref
Btrfs: hold the tree mod lock in __tree_mod_log_rewind
Btrfs: make backref walking code handle skinny metadata
Btrfs: fix crash regarding to ulist_add_merge
Btrfs: fix several potential problems in copy_nocow_pages_for_inode
Btrfs: cleanup the code of copy_nocow_pages_for_inode()
Btrfs: fix oops when recovering the file data by scrub function
Btrfs: make the chunk allocator completely tree lockless
Btrfs: cleanup orphaned root orphan item
Btrfs: fix wrong mirror number tuning
Btrfs: cleanup redundant code in btrfs_submit_direct()
Btrfs: remove btrfs_sector_sum structure
Btrfs: check if we can nocow if we don't have data space
Btrfs: stop using try_to_writeback_inodes_sb_nr to flush delalloc
Btrfs: use a percpu to keep track of possibly pinned bytes
Btrfs: check for actual acls rather than just xattrs when caching no acl
Btrfs: move btrfs_truncate_page to btrfs_cont_expand instead of btrfs_truncate
Btrfs: optimize reada_for_balance
Btrfs: optimize read_block_for_search
...
We did not allow file data clone within the same file because of
deadlock issues.
However, we now use nested lock to avoid deadlock between the
parent directory and the child file.
So it's safe to do file clone within the same file when the two
ranges are not overlapped.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
when user runs command btrfs dev del the raid requisite error if any
goes to the /var/log/messages, its not good idea to clutter messages
with these user (knowledge) errors, further user don't have to review
the system messages to know problem with the cli it should be dropped
to the user as part of the cli return.
to bring this feature created a set of the ERROR defined
BTRFS_ERROR_DEV* error codes and created their error string.
I expect this enum to be added with other error which we might
want to communicate to the user land
v3:
moved the code with in the file no logical change
v1->v2:
introduce error codes for the device mgmt usage
v1:
adds a parameter in the ioctl arg struct to carry the error string
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Before applying this patch, we need flush all the delalloc inodes in
the fs when we want to create a snapshot, it wastes time, and make
the transaction commit be blocked for a long time. It means some other
user operation would also be blocked for a long time.
This patch improves this problem, we just flush the delalloc inodes that
in the source trees before snapshot creation, so the transaction commit
will complete quickly.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
btrfs_read_fs_root_no_name() already checks if btrfs_root_refs()
is zero and returns ENOENT in this case. There is no need to do
it again in six places.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We don't need to copy it back to user side as it remains unchanged.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
btrfs_qgroup_wait_for_completion waits until the currently running qgroup
operation completes. It returns immediately when no rescan process is in
progress. This is useful to automate things around the rescan process (e.g.
testing).
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The search ioctl skips items that are too large for a result buffer, but
inline items of a certain size occuring before any search result is
found would trigger an overflow and stop the search entirely.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel de Perthuis <g2p.code+btrfs@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There's a theoretical possibility of reading stale (or even more
theoretically, freed) data from DEV_INFO ioctl when the device would
disappear between an early mutex unlock and data being copied from the
device structure.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.
removed functions:
btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()
btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.
ulist.c functions are left, another patch will take care of those.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If qgroup tracking is out of sync, a rescan operation can be started. It
iterates the complete extent tree and recalculates all qgroup tracking data.
This is an expensive operation and should not be used unless required.
A filesystem under rescan can still be umounted. The rescan continues on the
next mount. Status information is provided with a separate ioctl while a
rescan operation is in progress.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We need such a sanity check for wrong start when we defrag a file, otherwise,
even with a wrong start that's larger than file size, we can end up changing
not only inode's force compress flag but also FS's incompat flags.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Steps to reproduce:
mkfs.btrfs <disk>
mount <disk> <mnt>
btrfs quota enable <mnt>
btrfs sub create <mnt>/subv
btrfs qgroup limit 10K <mnt>/subv
btrfs quota disable <mnt>/subv
It is wrong for qgroup to reserve when disabling quota,
so just use tree_root to avoid edquot when disabling quota.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The subvolume ioctls block on the parent directory mutex that can be
held by other concurrent snapshot activity for a long time. Give the
user at least some chance to get out of this situation by allowing
to send a kill signal.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Pull btrfs fixes from Chris Mason:
"These are scattered fixes and one performance improvement. The
biggest functional change is in how we throttle metadata changes. The
new code bumps our average file creation rate up by ~13% in fs_mark,
and lowers CPU usage.
Stefan bisected out a regression in our allocation code that made
balance loop on extents larger than 256MB."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: improve the delayed inode throttling
Btrfs: fix a mismerge in btrfs_balance()
Btrfs: enforce min_bytes parameter during extent allocation
Btrfs: allow running defrag in parallel to administrative tasks
Btrfs: avoid deadlock on transaction waiting list
Btrfs: do not BUG_ON on aborted situation
Btrfs: do not BUG_ON in prepare_to_reloc
Btrfs: free all recorded tree blocks on error
Btrfs: build up error handling for merge_reloc_roots
Btrfs: check for NULL pointer in updating reloc roots
Btrfs: fix unclosed transaction handler when the async transaction commitment fails
Btrfs: fix wrong handle at error path of create_snapshot() when the commit fails
Btrfs: use set_nlink if our i_nlink is 0
Commit 5ac00add added a testnset mutex and code that disallows
running administrative tasks in parallel. It is prevented that
the device add/delete/balance/replace/resize operations are
started in parallel. By mistake, the defragmentation operation
was included in the check for mutually exclusiveness as well.
This is fixed with this commit.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If the async transaction commitment failed, we need close the
current transaction handler, or the current transaction will be
blocked to commit because of this orphan handler.
We fix the problem by doing sync transaction commitment, that is
to invoke btrfs_commit_transaction().
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
