Commit Graph

401 Commits

Author SHA1 Message Date
Arnd Bergmann
5b02ee3d21 asm-generic: merge branch 'master' of torvalds/linux-2.6
Fixes a merge conflict against the x86 tree caused by a fix to
atomic.h which I renamed to atomic_long.h.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-12 11:32:58 +02:00
Paul Mundt
19470e185a sh: Wire up sys_perf_counter_open.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-12 01:33:22 +03:00
Arnd Bergmann
5b17e1cd89 asm-generic: rename page.h and uaccess.h
The current asm-generic/page.h only contains the get_order
function, and asm-generic/uaccess.h only implements
unaligned accesses. This renames the file to getorder.h
and uaccess-unaligned.h to make room for new page.h
and uaccess.h file that will be usable by all simple
(e.g. nommu) architectures.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11 21:02:17 +02:00
Arnd Bergmann
72099ed271 asm-generic: rename atomic.h to atomic-long.h
The existing asm-generic/atomic.h only defines the
atomic_long type. This renames it to atomic-long.h
so we have a place to add a truly generic atomic.h
that can be used on all non-SMP systems.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 21:02:17 +02:00
Arnd Bergmann
c31ae4bb4a asm-generic: introduce asm/bitsperlong.h
This provides a reliable way for asm-generic/types.h and other
files to find out if it is running on a 32 or 64 bit platform.

We cannot use CONFIG_64BIT for this in headers that are included
from user space because CONFIG symbols are not available there.
We also cannot do it inside of asm/types.h because some headers
need the word size but cannot include types.h.

The solution is to introduce a new header <asm/bitsperlong.h>
that defines both __BITS_PER_LONG for user space and
BITS_PER_LONG for usage in the kernel. The asm-generic
version falls back to 32 bit unless the architecture overrides
it, which I did for all 64 bit platforms.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11 21:02:14 +02:00
Arnd Bergmann
63b852a6b6 asm-generic: rename termios.h, signal.h and mman.h
The existing asm-generic versions are incomplete and included
by some architectures. New architectures should be able
to use a generic version, so rename the existing files and
change all users, which lets us add the new files.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11 21:01:52 +02:00
Paul Mundt
6a1555fdde sh: Wire up sys_rt_tgsigqueueinfo.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:38:05 +03:00
Aoi Shinkai
4c7c997886 sh: Fix sh4a llsc-based cmpxchg()
This fixes up a typo in the ll/sc based cmpxchg code which apparently
wasn't getting a lot of testing due to the swapped old/new pair. With
that fixed up, the ll/sc code also starts using it and provides its own
atomic_add_unless().

Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:31:55 +03:00
Magnus Damm
098dee99d1 sh: add enable()/disable()/set_rate() to div6 code
This patch updates the div6 clock helper code to add support
for enable(), disable() and set_rate() callbacks.

Needed by the camera clock enabling board code on Migo-R.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:12:58 +03:00
Magnus Damm
ed740cb9b7 sh: sh7722 mode pin definitions
This patch adds sh7722 mode pin and pin function
controller comments.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:09:19 +03:00
Magnus Damm
36e5b26bda sh: sh7724 mode pin comments
This patch adds comments for the sh7724 mode pins
and pin function controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:09:12 +03:00
Magnus Damm
e4218ef506 sh: sh7723 mode pin V2
This patch is sh7723 mode pin V2. Mode pins and
pin function controller comments are added.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:09:01 +03:00
Magnus Damm
0d4fdbb64f sh: rework mode pin code
This patch reworks the mode pin code to keep the pin
definitions in one place. The mode pins values are now
the value of the bit instead of bit number.

With this patch in place the sh7785 header file contains
mode pin comments. The sh7785 clock code and the sh7785lcr
board code are updated to reflect the new shared mode pins.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:08:53 +03:00
Magnus Damm
2693e2740d sh: clock div6 helper code
This patch adds div6 clock helper code. The div6 clocks
are simply 6-bit divide-by-n modules where n is 1 to 64.

Needed for vclk on sh7722, sh7723, sh7343 and sh7366.
sh7724 needs this even more for vclk, fclka, fclkb,
irdaclk and spuclk.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:07:13 +03:00
Paul Mundt
cf9fe114e3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-11 09:01:14 +03:00
Magnus Damm
48c72fccbf sh: 16-bit get_unaligned() sh4a fix
This patch fixes the 16-bit case of the sh4a specific
unaligned access implementation. Without this patch
the 16-bit version of sh4a get_unaligned() results in
a 32-bit read which may read more data than intended
and/or cross page boundaries.

Unbreaks mtd NOR write handling on Migo-R.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-04 20:20:24 +09:00
Kuninori Morimoto
d974ac24b7 sh: add RAMCR definition for sh4
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02 12:12:53 +09:00
Magnus Damm
a1153e27ee sh: shared div4 clock code
Add shared code for 4-bit divisor clocks.

Processor specific code can use SH_CLK_DIV4()
to initialize div4 clocks, and then use
sh_clk_div4_register() for registration.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01 18:07:37 +09:00
Magnus Damm
6881e8bf3d sh: shared mstp32 clock code
Add shared 32-bit module stop bit clock support.

Processor specific code can use SH_CLK_MSTP32()
to initialize module stop bit clocks, and then
use sh_clk_mstp32() for registration.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01 18:05:37 +09:00
Magnus Damm
4a44b32969 sh: sh7785 mode pin definitions
This patch adds sh7785 mode pin definitions. Mode pins and
pin function controller comments are added as well.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01 15:56:00 +09:00
Magnus Damm
eb9b9b56ee sh: boot word / mode pin support V2
Add mode pin support for the SuperH architecture V2.

With this patch applied the board code can add their
own function to export the cpu mode pin configuration.
In most cases this will be a constant bitmap, but
boards that allow reading this from a register can
instead read out the pin state from hardware.

The code warns if a pin is tested but no board specific
mode pin function has been provided.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01 15:44:49 +09:00
Oskar Schirmer
c3dc5bec05 flat: fix data sections alignment
The flat loader uses an architecture's flat_stack_align() to align the
stack but assumes word-alignment is enough for the data sections.

However, on the Xtensa S6000 we have registers up to 128bit width
which can be used from userspace and therefor need userspace stack and
data-section alignment of at least this size.

This patch drops flat_stack_align() and uses the same alignment that
is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's
not defined by the architecture.

It also fixes m32r which was obviously kaput, aligning an
uninitialized stack entry instead of the stack pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Paul Mundt
464c9e1037 Merge branch 'sh/clkfwk' 2009-05-26 23:50:40 +09:00
Paul Mundt
b7e2ac6194 sh: pci: Disable MWI and make pci_dma_burst_advice() a bit more accurate.
None of the SH PCI controllers support MWI, it is always treated as a
direct memory write, so simply disable it outright. In the case of the
PCI cache line size, consult that for the pci_dma_burst_advice()
strategy, and switch over to PCI_DMA_BURST_MULTIPLE, as PPC64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26 23:13:13 +09:00
Magnus Damm
61ce5393e4 sh: remove clk_ops->build_rate_table()
This patch removes the ->build_rate_table() callback,
->recalc() may instead be used for this purpose.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26 17:08:45 +09:00
Magnus Damm
c94a85746f sh: add shared clock framework frequency table code
Add SuperH-specific clock framework helper functions:
- clk_rate_table_build() - build cpufreq table from divisors/multipliers
- clk_rate_table_round() - use cpufreq table to find matching frequency

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26 17:08:39 +09:00
Kuninori Morimoto
287c129716 sh: Add ms7724se (SH7724) board support
This adds preliminary support for the ms7724se solution engine board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26 17:01:47 +09:00
Paul Mundt
62fad39be0 sh: Add a NR_IRQS_LEGACY for external IRQ0-7.
This adds a NR_IRQS_LEGACY definition, which will be used by sparse irq.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 13:50:18 +09:00
Paul Mundt
62669e61a5 sh: mach-hp6xx: Fix up the hp6xx build for hd64461 changes.
Fixes several compile errors due to the recent hd64461 I/O base changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-20 11:27:13 +09:00
Paul Mundt
bec36eca6f sh: hd64461: Fix up I/O base register offsets.
hd64461 is mapped in a fixed location, so the I/O base itself is fairly
meaningless as a configuration item. Additionally, this makes it
impossible to share hd64461 code alongside generic drivers (in the case
of sh_dac_audio), so simply make it commonly defined and permit the
mach_is_foo() logic to work out the proper semantics.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-15 12:03:04 +09:00
Paul Mundt
549b5e358d sh: clkfwk: Add MSTP bits to SH7785 clock framework.
This plugs in all of the MSTP functions in to the clock framework,
and hands them off to the platform devices that want them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14 17:38:46 +09:00
Paul Mundt
cedcf3366f sh: clkfwk: Map tree hierarchy in debugfs.
This adopts the OMAP clock framework debugfs bits and replaces the aging
procfs bits. The procfs clocks entry was primarily a debugging aid, and
used to be tied in to cpuinfo before the clock list grew too unweildly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 21:51:28 +09:00
Paul Mundt
cc96eace48 sh: clkfwk: rate table construction and rounding for SH7785.
This adds support for constructing a rate table by looking at potential
divisors for a specified clock. Each FQRMR clock is given its own table.
Presently each table is rebuilt when the parent propagates down a new
rate, so some more logic needs to be added to do this more intelligently.

Additionally, a fairly generic round_rate() implementation is then
layered on top of it, which subsequently provides us with cpufreq support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 20:28:15 +09:00
Paul Mundt
a77b5ac0ea sh: clkfwk: Update SH7785 for refactored clock framework.
This updates the SH7785 CPU code as well as the SH7785LCR board support
code for making use of the newly refactored clock framework. Support for
the legacy CPG clocks is dropped at this point, with the extal frequency
fed in from the board code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 17:55:00 +09:00
Paul Mundt
253b0887b3 sh: clkfwk: Rework legacy CPG clock handling.
This moves out the old legacy CPG clocks to their own file, and converts
over the existing users. With these clocks going away and each CPU
dealing with them on their own, CPUs can gradually move over to the new
interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 17:38:11 +09:00
Paul Mundt
fd5b12458b Merge branch 'master' into sh/clkfwk 2009-05-12 19:54:36 +09:00
Paul Mundt
8be5f1a68f sh: Kill off the remnants of the old timer code.
Now with all of the TMU users moved over to the new TMU driver, and the
old TMU driver killed off, the left-over infrastructure can go along
with it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 19:53:55 +09:00
Magnus Damm
f19900b2e6 sh: remove old TMU driver
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c)

As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU
and configure timer channel using platform data.

If multiple TMU channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_tmu.0" to select the first channel.

To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 19:53:14 +09:00
Paul Mundt
0dae89572c sh: clkfwk: Wire up clk_get_sys() support.
This stubs in clk_get_sys() from the ARM clkdev implementation.
Tentatively conver the clk_get() lookup code to use this, and once the
rest of the in-tree users are happy with this, it can replace the
fallback lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 06:18:09 +09:00
Paul Mundt
007e8363b6 sh: clkfwk: Kill off clk_recalc_rate().
The only user for this is the SH-Mobile r_clk, which is now added as a
root clock and can be kicked via propagate_rate() as usual. Given that,
there is no longer any need for the special clk_recalc_rate(), so we kill
it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 06:05:32 +09:00
Paul Mundt
aa87aa343f sh: clkfwk: Improve the generic clk_set_parent() implementation.
This causes the generic clk_set_parent() implementation to be a bit more
intelligent. A clk_reparent() is added to move the clock over to the new
parent's sibling list, which then allows the generic rate propagation
code to succeed. This also becomes a nop if the new and old parents are
unchanged.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 05:51:05 +09:00
Paul Mundt
ae891a4264 sh: clkfwk: Fix up the clk_enable() error path.
There are a couple of instances where a clk_enable() can fail, which the
SH-Mobile code presently handles, but doesn't get reported all the way
back up. This fixes up the return type so the errors make it all the way
down to the drivers.

Additionally, we now also error out properly if the parent enable fails.
Prep work for aggressively turning off unused clocks on boot.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 05:30:10 +09:00
Paul Mundt
154502e160 sh: clkfwk: Convert SH-Mobile CPUs to use CLK_ENABLE_ON_INIT.
Kill off all of the clk_always_enabled leftovers and use the new flag
directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 05:18:13 +09:00
Paul Mundt
4ff29ff8e8 sh: clkfwk: Consolidate the ALWAYS_ENABLED / NEEDS_INIT mess.
There is no real distinction here in behaviour, either a clock needs to
be enabled on initialiation or not. The ALWAYS_ENABLED flag was always
intended to only apply to clocks that were physically always on and could
simply not be disabled at all from software. Unfortunately over time this
was abused and the meaning became a bit blurry.

So, we kill off both of all of those paths now, as well as the newer
NEEDS_INIT flag, and consolidate on a CLK_ENABLE_ON_INIT. Clocks that
need to be enabled on initialization can set this, and it will purposely
enable them and bump the refcount up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 05:14:53 +09:00
Paul Mundt
b1f6cfe48c sh: clkfwk: refactor rate propagation.
This resyncs the rate propagation strategy with the scheme used by the
OMAP clock framework. Child clocks are tracked on a list under each
parent and propagation happens there specifically rather than constantly
iterating over the global clock list.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 04:27:43 +09:00
Paul Mundt
a02cb230bb sh: clkfwk: Add a followparent_recalc() helper.
This adds a followparent_recalc() helper for clocks that just follow the
parent's rate. Switch over the few CPUs that use this scheme for some of
their clocks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 03:50:44 +09:00
Paul Mundt
b68d820143 sh: clkfwk: Make recalc return an unsigned long.
This is prep work for cleaning up some of the rate propagation bits.
Trivial conversion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 03:45:08 +09:00
Yoshihiro Shimoda
7bce6c2740 sh: sh7785lcr: fix I2C device address map for 32-bit mode
This fixes up the broken I2C offset in 32-bit mode.
The cause is because the board datasheet had a mistake.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11 16:56:16 +09:00
Paul Mundt
567bb8fd47 sh: Fix up R0 dependence in __arch_swab16/32.
There is nothing in these routines that inherently depends on R0 use.
Given that these routines are inlined, it is rather easy to blow up the
compiler by exhausting the spill class when performing a 64-bit swab.

This presently manifests itself as the following:

CC      fs/ocfs2/suballoc.o
fs/ocfs2/suballoc.c: In function 'ocfs2_reserve_suballoc_bits':
fs/ocfs2/suballoc.c:638: error: unrecognizable insn:
(insn 2793 1230 1231 103 arch/sh/include/asm/swab.h:33 (set (reg:HI 853)
        (subreg:HI (reg:SI 149 macl) 2)) -1 (expr_list:REG_DEAD (reg:SI 149 macl)
        (nil)))
fs/ocfs2/suballoc.c:638: internal compiler error: in extract_insn, at recog.c:1991

This patch switches over to using an arbitrarily assigned register instead.

While the same issue does not exist in the SH-5 case, there is likewise no harm
in having an alternate register used for the byterev/shari pair.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 14:25:39 +09:00
Paul Mundt
2bcfffa423 sh: Rename opcode_t to insn_size_t.
This is now clashing with a driver, so just rename it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09 16:02:08 +09:00
Paul Mundt
6dbe47a170 sh: Provide __read_{read,write}sl() definitions for sh64.
These are presently only defined for sh32, use the plain unoptimized
versions for sh64. Fixes up smsc911x build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09 14:44:30 +09:00
Kieran Bingham
e73173dbe5 sh: Fix UBC setup and registers for SH2A
Signed-off-by: Kieran Bingham <kieranbingham@gmail.com>
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09 00:09:21 +09:00
Kieran Bingham
be6514c629 sh: Add in some ptrace definitions from GDB.
Plugs in PT_TEXT_END_ADDR/PT_TEXT_ADDR/PT_DATA_ADDR/PT_TEXT_LEN
definitions.

Signed-off-by: Kieran Bingham <kieranbingham@gmail.com>
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09 00:06:03 +09:00
Magnus Damm
4f5ecaa054 sh: clock framework update, fix count and kill off kref
This patch updates the clock framework use count code.
With this patch the enable() and disable() callbacks
only get called when counting from and to zero.
While at it the kref stuff gets replaced with an int.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 17:46:22 +09:00
Paul Mundt
5ac5496411 sh: Kill off dead handle_timer_tick() code.
Nothing is using this anymore now that we have fully converted to generic
time, so kill it off completely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 16:44:00 +09:00
Paul Mundt
c51279ec0d sh: Kill off unused SH-5 irq_describe cruft.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07 18:17:20 +09:00
Paul Mundt
0fb849b9d7 sh: Integrate the SH-5 onchip_remap() more coherently.
Presently this is special-cased for early initialization. While there are
situations where these static early initializations are still necessary,
with minor changes it is possible to use this for the regular ioremap
implementation as well. This allows us to kill off the special-casing for
the remap completely and to start tidying up all of the SH-5
special-casing in drivers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07 18:10:27 +09:00
Paul Mundt
ee1acbfabd sh: Handle shm_align_mask also for HAVE_ARCH_UNMAPPED_AREA_TOPDOWN.
Presently shm_align_mask is only looked at for the bottom up case, but we
still want this for proper colouring constraints in the topdown case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07 16:38:16 +09:00
Paul Mundt
dec56e6312 sh: Kill off the now unused ARCH_USES_GETTIMEOFFSET code.
Now that the stragglers (MTU2/CMT/etc.) have been rewritten and we are
selecting both GENERIC_TIME and GENERIC_CLOCKEVENTS, the get_offset()
timer op is completely unused. As a result, we are now able to kill off
the ARCH_USES_GETTIMEOFFSET references.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 18:18:14 +09:00
Magnus Damm
3280c8865e sh: remove old MTU2 driver
This patch removes the old MTU2 driver (CONFIG_SH_MTU2/timer-mtu2.c)

As replacement, select the sh_cmt driver with CONFIG_SH_TIMER_MTU2
and configure timer channel using platform data.

If multiple MTU channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_mtu2.0" to select the first channel.

To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 17:40:13 +09:00
john stultz
7563431107 time: sh: convert to use arch_getoffset() infrastructure
Convert sh to use GENERIC_TIME via the arch_getoffset() infrastructure.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 17:32:55 +09:00
Paul Mundt
66fdc95172 Merge branch 'timers/clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip 2009-05-03 17:24:55 +09:00
Magnus Damm
f425752fc6 sh: remove old CMT driver
This patch removes the old CMT driver (CONFIG_SH_CMT/timer-cmt.c)

As replacement, select the sh_cmt driver with CONFIG_SH_TIMER_CMT
and configure timer channel using platform data.

If multiple CMT channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_cmt.0" to select the first channel.

To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-30 13:21:14 +09:00
Magnus Damm
e6be3a2586 sh: pass through ioremap() for non-mmu processors.
All 32-bit SuperH processors currently go through __ioremap_mode()
and check for IO_TRAPPED and directly mapped segments. With this
patch we simplify the MMU less case with a pass through version of
 __ioremap_mode() which just returns the physical address.

The effects of this is change are:
 - fix non-MMU ioremap() of high address hardware blocks (sh7203 CMT)
 - make sure IO_TRAPPED is not selected

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-30 12:56:37 +09:00
Paul Mundt
47c8a08bbe sh: rtc-generic support.
This adds rtc-generic support for SUPERH32.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-27 17:34:39 +09:00
Paul Mundt
ecd4ca52bf sh: Fix up unsigned syscall_nr in SH-5 pt_regs.
syscall_nr is presently defined as unsigned in the SH-5 pt_regs,
while the syscall restarting code wants it to be signed. Fix this
up, and bring it in line with the other SH parts.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-27 17:05:38 +09:00
Paul Mundt
339b042bb4 Merge branches 'sh/stable-updates' and 'sh/pci-rework' 2009-04-27 09:45:43 +09:00
Paul Mundt
3e98f9f15e sh: pci: Fix up the build for CONFIG_PCI=n.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-24 15:39:39 +09:00
Paul Mundt
805fcc8899 sh: pci: Kill off the last remnants of the now unused pci-auto code.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:46:42 +09:00
Paul Mundt
3444f5ec49 sh: pci: Tidy up the dreamcast PCI support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 20:22:05 +09:00
Paul Mundt
5ba7205fc4 sh: pci: Kill off the now unused hose->io_base.
Nothing is using this any more, so kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:00:32 +09:00
Paul Mundt
09cfeb133e sh: pci: Track io and mem_offset per-channel.
This implements a per-hose offset for I/O and mem resources.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:42:00 +09:00
Paul Mundt
e79066a659 sh: pci: New-style controller registration.
This moves off of the board_pci_channels[] approach for bus registration
and over to a cleaner register_pci_controller(), all derived from the
MIPS code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:29:22 +09:00
Paul Mundt
99f95f1178 sh: pci: Rework fixed region checks in ioremap().
Not all PCI channels have non-translatable memory windows, this is a
special property of the on-chip PCIC with its 0xfd00... mapping, handle
this explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:24:57 +09:00
Paul Mundt
0bb34a6bf1 sh: pci: Consolidate pci_iomap() and use the generic I/O base.
This consolidates the pci_iomap() definitions and reworks how the I/O
port base is handled. PCI channels can register their own I/O map base,
or if none is provided, the system-wide generic I/O base is used instead.

Functionally nothing changes, while this allows us to kill off lots of
I/O address special casing and lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:38:00 +09:00
Paul Mundt
394b6d2fe6 sh: pci: Kill off unused pcibios_fixup().
This is left over cruft that hasn't been used by anything in a long time,
kill off bits that weren't purged previously.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:18:46 +09:00
Paul Mundt
a3c0e0d003 sh: pci: Consolidate pcibios_align_resource() definitions.
This introduces a saner pcibios_align_resource() that can be used
regardless of whether pci-auto or pci-new are being used, and
consolidates it in pci-lib.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:14:29 +09:00
Paul Mundt
9833385131 sh: pci: HAVE_PCI_MMAP support.
Derived from the MIPS version, now uses pgprot_noncached().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 15:51:45 +09:00
Paul Mundt
9ade1217c9 sh: pci: Drop asm-generic/pci.h, so we can use our own fixups.
The new PCI code wants its own bus<->resource mappings instead of the
generic equivalents, so drop the asm-generic include in preparation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 15:38:25 +09:00
Paul Mundt
22fd67c5c9 Merge branches 'sh/earlytimer' and 'sh/shmobile-r2r-staging' 2009-04-19 13:08:33 +09:00
Magnus Damm
87a00dc059 sh: Add plat_early_device_setup()
Add a plat_early_device_setup() function to allow
processor-specific code to register Early Platform Data.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-19 13:06:25 +09:00
Magnus Damm
8ce0143b11 sh: pci io port base address code
Adds a __get_pci_io_base() function which is used to match a port range
against struct pci_channel. This allows us to detect if a port range is
assigned to pci or happens to be legacy port io. While at it, remove unused
cpu-specific cruft.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:14 +09:00
Magnus Damm
ef339f241b sh: pci memory range checking code
This patch changes the code to use __is_pci_memory() instead of
is_pci_memaddr(). __is_pci_memory() loops through all the pci
channels on the system to match memory windows.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:14 +09:00
Magnus Damm
ef53fdeb7e sh: add io_base member to pci_channel
Store the io window base address in struct pci_channel and use that one
instead of SH77xx_PCI_IO_BASE.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
e4c6a3604e sh: add reg_base member to pci_channel
Store the base address of the pci host controller registers in struct
pci_channel and use the address in pci_read_reg() and pci_write_reg().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
b6706ef10f sh: hook in struct pci_channel in sysdata
Store a struct pci_channel pointer in bus->sysdata. This makes whatever
struct pci_channel assigned to a bus available for sh4_pci_read() and
sh4_pci_write(). We also modify PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to
use bus->sysdata - this to gives us support for multiple pci channels.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
d0e3db40e2 sh: add init member to pci_channel data
This patch adds an init callback to struct pci_channel and makes sure
it is initialized properly. Code is added to call this init function
from pcibios_init(). Return values are adjusted and a warning is is
printed if init fails.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:12 +09:00
Kuninori Morimoto
0207a2efb4 sh: Add support for SH7724 (SH-Mobile R2R) CPU subtype.
This implements initial support for the SH-Mobile R2R CPU.
Based on Rev 0.11 of the initial SH7724 hardware manual.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 14:40:56 +09:00
Paul Mundt
f802d969b6 sh: Add support for DMA API debugging.
This wires up support for the generic DMA API debugging.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-09 10:36:54 -07:00
Paul Mundt
b35346fd25 sh: Provide cpumask_of_pcibus() to fix NUMA build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-07 17:11:15 -07:00
Paul Mundt
090fed50ca sh: wire up sys_preadv/sys_pwritev() syscalls.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-06 09:00:16 -07:00
Linus Torvalds
45e36c1666 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: sh7785lcr: Map whole PCI address space.
  sh: Fix up DSP context save/restore.
  sh: Fix up number of on-chip DMA channels on SH7091.
  sh: update defconfigs.
  sh: Kill off broken direct-mapped cache mode.
  sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
  sh: Add a command line option for disabling I/O trapping.
  sh: Select ARCH_HIBERNATION_POSSIBLE.
  sh: migor: Fix up CEU use flags.
  input: migor_ts: add wakeup support
  rtc: rtc-sh: use set_irq_wake()
  input: sh_keysc: use enable/disable_irq_wake()
  sh: intc: set_irq_wake() support
  sh: intc: install enable, disable and shutdown callbacks
  clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
  sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
  sh: Fix up -Wformat-security whining.
  sh: ap325rxa: Add ov772x support, again.
  sh: Sanitize asm/mmu.h for assembly use.
  sh: Tidy up sh7786 pinmux table.
  ...
2009-04-05 11:15:54 -07:00
Michael Trimarchi
01ab10393c sh: Fix up DSP context save/restore.
There were a number of issues with the DSP context save/restore code,
mostly left-over relics from when it was introduced on SH3-DSP with
little follow-up testing, resulting in things like task_pt_dspregs()
referencing incorrect state on the stack.

This follows the MIPS convention of tracking the DSP state in the
thread_struct and handling the state save/restore in switch_to() and
finish_arch_switch() respectively. The regset interface is also updated,
which allows us to finally be rid of task_pt_dspregs() and the special
cased task_pt_regs().

Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-04 11:48:11 -04:00
Robin Holt
f5f7eac41d Allow rwlocks to re-enable interrupts
Pass the original flags to rwlock arch-code, so that it can re-enable
interrupts if implemented for that architecture.

Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs
which just do the same thing as non-flags variants.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:11 -07:00
Paul Mundt
e869a90ee1 sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
cpuidle wants ARCH_HAS_DEFAULT_IDLE defined in order to use the
default idle loop. So, make it accessible and enable it for all
sh machines.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02 13:08:31 +09:00
Paul Mundt
c4361bb64b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-04-02 11:17:41 +09:00
Francesco VIRLINZI
3b4df71b36 sh: Sanitize asm/mmu.h for assembly use.
This patch adds the ifndef __ASSEMBLY__ preprocessor to allow the
defines in the file to be used also in assembly code.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31 07:42:37 +09:00
Kuninori Morimoto
1c58b0b1a1 sh: Tidy up sh7786 pinmux table.
Formatting and typo fix.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31 07:39:51 +09:00
Rusty Russell
0451fb2ebc cpumask: remove node_to_first_cpu
Everyone defines it, and only one person uses it
(arch/mips/sgi-ip27/ip27-nmi.c).  So just open code it there.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-mips@linux-mips.org
2009-03-30 22:05:12 +10:30
David S. Miller
08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Rafael Ignacio Zurita
3bf509230a sh: fix the HD64461 level-triggered interrupts handling
Rework the hd64461 demuxer code to fix the HD64461 level-triggered
interrupts handling, using handle_level_irq() as needed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:57:48 +09:00
Paul Mundt
c20351846e sh: Flush only the needed range when unmapping a VMA.
This follows the ARM change from Aaro Koskinen:

	When unmapping N pages (e.g. shared memory) the amount of TLB
	flushes done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it
	should be N at maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8
	pages, so there is a noticeable performance penalty when
	unmapping a large VMA and the system is spending its time in
	flush_tlb_range().

	The problem is that tlb_end_vma() is always flushing the full VMA
	range. The subrange that needs to be flushed can be calculated by
	tlb_remove_tlb_entry(). This approach was suggested by Hugh
	Dickins, and is also used by other arches.

	The speed increase is roughly 3x for 8M mappings and for larger
	mappings even more.

Bits and peices are taken from the ARM patch as well as the existing
arch/um implementation that is quite similar.

The end result is a significant reduction in both partial and full TLB
flushes initiated through flush_tlb_range().

At the same time, the nommu implementation was broken, had a superfluous
cache flush, and subsequently would have triggered a BUG_ON() if a
code-path had triggered it. Tidy this up for correctness and provide a
nopped-out implementation there.

More background on the initial discussion can be found at:

	http://marc.info/?t=123609820900002&r=1&w=2
	http://marc.info/?t=123660375800003&r=1&w=2

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 21:19:49 +09:00
Paul Mundt
8263a67e16 sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.
This adds support for extended ASIDs (up to 16-bits) on newer SH-X3 cores
that implement the PTAEX register and respective functionality. Presently
only the 65nm SH7786 (90nm only supports legacy 8-bit ASIDs).

The main change is in how the PTE is written out when loading the entry
in to the TLB, as well as in how the TLB entry is selectively flushed.

While SH-X2 extended mode splits out the memory-mapped U and I-TLB data
arrays for extra bits, extended ASID mode splits out the address arrays.
While we don't use the memory-mapped data array access, the address
array accesses are necessary for selective TLB flushes, so these are
implemented newly and replace the generic SH-4 implementation.

With this, TLB flushes in switch_mm() are almost non-existent on newer
parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 17:49:49 +09:00
Magnus Damm
7759491274 sh: SuperH Mobile suspend support
This patch contains CONFIG_SUSPEND support to the SuperH
architecture. If enabled, SuperH Mobile processors will
register their suspend callbacks during boot.

To suspend, use "echo mem > /sys/power/state". To allow
wakeup, make sure "/sys/device/platform/../power/wakeup"
contains "enabled". Additional per-device driver patches
are most likely needed.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16 19:52:53 +09:00
Nobuhiro Iwamatsu
039a718ebb sh: Revert CONFIG_NR_ONCHIP_DMA_CHANNELS to MAX_DMA_CHANNELS
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16 19:43:08 +09:00
Francesco VIRLINZI
d680c76ecc sh: clkfwk: add clk_set_parent/clk_get_parent
This patch adds the clk_set_parent/clk_get_parent routines to the sh
clock framework.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-11 17:18:46 +09:00
Nobuhiro Iwamatsu
71b973a42c sh: dma-sh updates for multi IRQ and new SH-4A CPUs.
This adds DMA support for newer SH-4A CPUs, particularly SH7763/64/80/85.

This also enables multi IRQ support for platforms that have multiple
vectors bound to the same IRQ source.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 17:26:49 +09:00
Yoshihiro Shimoda
2f47f44790 sh: Support fixed 32-bit PMB mappings from bootloader.
This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.

P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 15:49:54 +09:00
Magnus Damm
2ef7f0dab6 sh: hibernation support
Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support
to the SuperH architecture.

To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state"
To resume, pass "resume=/dev/sda2" on the kernel command line.

The patch "pm: rework includes, remove arch ifdefs V2" is
needed to allow the generic swsusp code to build properly.

Hibernation is not enabled with this patch though, a patch
setting ARCH_HIBERNATION_POSSIBLE will be submitted later.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 12:55:40 +09:00
Kuninori Morimoto
5ac072e110 sh: Urquell board support.
This adds preliminary support for the SH7786-based Urquell board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 16:22:00 +09:00
Kuninori Morimoto
55ba99eb21 sh: Add support for SH7786 CPU subtype.
This adds preliminary support for the SH7786 CPU subtype.

While this is a dual-core CPU, only UP is supported for now. L2 cache
support is likewise not yet implemented.

More information on this particular CPU subtype is available at:

	http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 15:40:25 +09:00
Paul Mundt
a73090ffaf sh: Disable unsupportable prefetching on SH-3.
The SH-3 does not support 'pref'-based prefetching, only SH-2A and SH-4A
parts do. Remove SH-3 from the list.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27 16:42:05 +09:00
Magnus Damm
0197f21ca5 sh: prefetch early exception data on sh4/sh4a.
Prefetch early exception data. There is unused space in our
exception handler cache line anyway, so this is almost free.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27 16:41:17 +09:00
Magnus Damm
4f099ebb27 sh: remove EXPEVT vector from stack on sh3/sh4/sh4a
Remove EXPEVT vector from the stack, lookup_exception_vector()
for sh3/sh4/sh4a is already using k2 to get the vector.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27 16:26:19 +09:00
Patrick Ohly
cb9eff0978 net: new user space API for time stamping of incoming and outgoing packets
User space can request hardware and/or software time stamping.
Reporting of the result(s) via a new control message is enabled
separately for each field in the message because some of the
fields may require additional computation and thus cause overhead.
User space can tell the different kinds of time stamps apart
and choose what suits its needs.

When a TX timestamp operation is requested, the TX skb will be cloned
and the clone will be time stamped (in hardware or software) and added
to the socket error queue of the skb, if the skb has a socket
associated with it.

The actual TX timestamp will reach userspace as a RX timestamp on the
cloned packet. If timestamping is requested and no timestamping is
done in the device driver (potentially this may use hardware
timestamping), it will be done in software after the device's
start_hard_xmit routine.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:33 -08:00
Magnus Damm
955c077872 sh: rework clocksource and sched_clock
Rework and simplify the sched_clock and clocksource code. Instead
of registering the clocksource in a shared file we move it into the
tmu driver. Also, add code to handle sched_clock in the case of no
clocksource.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 16:44:17 +09:00
Roel Kluin
dc66ff6220 SH: fix start_thread and user_stack_pointer macros
Fix macros start_thread and user_stack_pointer.
When these macros aren't called with a variable named regs as second
argument, this will result in a build failure.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 15:41:15 +09:00
Matt Fleming
84fdf6cda3 sh: Use the atomic_t "counter" member
Now that atomic_t is a generic opaque type for all architectures, it is
unwise to use intimate knowledge of its internals when manipulating it.

Instead of relying on the "counter" member being at offset 0 from the
beginning of an atomic_t, explicitly reference the member. This guards
us from any changes to the layout of the beginning of the atomic_t type.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:57:10 +09:00
Matt Fleming
42990701f9 sh: Relax inline assembly constraints
When dereferencing the memory address contained in a register and
modifying the value at that memory address, the register should not be
listed in the inline asm outputs. The value at the memory address is an
output (which is taken care of with the "memory" clobber), not the register.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:57:09 +09:00
Paul Mundt
e4e3c3f17f Merge branch 'sh/stable-updates' 2009-01-29 11:56:45 +09:00
Takashi Yoshii
c20f326a62 sh: Fix up T-bit error handling in SH-4A mutex fastpath.
This corrects a deadlock encountered on ap325 in the cases where the
mutex is contended and the slow-path needs to be fallen back upon.

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:56:03 +09:00
Paul Mundt
03f07876df sh: Fix up spurious syscall restarting.
The T-bit manipulation for syscall error checking had the side effect of
spuriously returning ERESTART* errno values over EINTR. So, we simplify
the error checking a bit and leave the T-bit alone.

Reported-by: Kaz Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:56:03 +09:00
Magnus Damm
69edbba002 sh: use gpiolib
This patch updates the SuperH gpio code to make use of gpiolib. The
gpiolib callbacks get() and set() are lockless, but we use our own
spinlock for the other operations to make sure hardware register
bitfield accesses stay atomic.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27 14:49:10 +09:00
Magnus Damm
3292094e88 sh: lockless gpio_set_value()
This patch optimizes the gpio data register handling for gpio_set_value().

Instead of using the good old spinlock-plus-read-modify-write strategy
we now use a shadow register and atomic operations.

This improves the bitbanging mmc performance on Migo-R from 26 Kbytes/s
to 40 Kbytes/s.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27 14:49:10 +09:00
Magnus Damm
18801be7f8 sh: make gpio_get/set_value() O(1)
This patch modifies the table based SuperH gpio implementation to
make use of direct table lookups. With this change the functions
gpio_get_value() and gpio_set_value() are O(1).

Tested on Migo-R using bitbanging mmc. Performance is improved from
11 KBytes/s to 26 Kbytes/s.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27 14:49:09 +09:00
Mike Frysinger
c2bcc4a7ff asm-sh/posix_types_{32,64}.h: drop __GLIBC__/__USE_ALL usage
Bring sh in line with all the other ports.  Not sure how sh missed this
change as all the other arches were being updated ...

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:41:21 +09:00
Linus Torvalds
bca268565f Merge branch 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [CVE-2009-0029] s390 specific system call wrappers
  [CVE-2009-0029] System call wrappers part 33
  [CVE-2009-0029] System call wrappers part 32
  [CVE-2009-0029] System call wrappers part 31
  [CVE-2009-0029] System call wrappers part 30
  [CVE-2009-0029] System call wrappers part 29
  [CVE-2009-0029] System call wrappers part 28
  [CVE-2009-0029] System call wrappers part 27
  [CVE-2009-0029] System call wrappers part 26
  [CVE-2009-0029] System call wrappers part 25
  [CVE-2009-0029] System call wrappers part 24
  [CVE-2009-0029] System call wrappers part 23
  [CVE-2009-0029] System call wrappers part 22
  [CVE-2009-0029] System call wrappers part 21
  [CVE-2009-0029] System call wrappers part 20
  [CVE-2009-0029] System call wrappers part 19
  [CVE-2009-0029] System call wrappers part 18
  [CVE-2009-0029] System call wrappers part 17
  [CVE-2009-0029] System call wrappers part 16
  [CVE-2009-0029] System call wrappers part 15
  ...
2009-01-14 19:58:40 -08:00
Harvey Harrison
74d96f0186 byteorder: make swab.h include asm/swab.h like a regular header
Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14 19:56:50 -08:00
Heiko Carstens
1134723e96 [CVE-2009-0029] Remove __attribute__((weak)) from sys_pipe/sys_pipe2
Remove __attribute__((weak)) from common code sys_pipe implemantation.
IA64, ALPHA, SUPERH (32bit) and SPARC (32bit) have own implemantations
with the same name. Just rename them.
For sys_pipe2 there is no architecture specific implementation.

Cc: Richard Henderson <rth@twiddle.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:15 +01:00
David Howells
8feae13110 NOMMU: Make VMAs per MM as for MMU-mode linux
Make VMAs per mm_struct as for MMU-mode linux.  This solves two problems:

 (1) In SYSV SHM where nattch for a segment does not reflect the number of
     shmat's (and forks) done.

 (2) In mmap() where the VMA's vm_mm is set to point to the parent mm by an
     exec'ing process when VM_EXECUTABLE is specified, regardless of the fact
     that a VMA might be shared and already have its vm_mm assigned to another
     process or a dead process.

A new struct (vm_region) is introduced to track a mapped region and to remember
the circumstances under which it may be shared and the vm_list_struct structure
is discarded as it's no longer required.

This patch makes the following additional changes:

 (1) Regions are now allocated with alloc_pages() rather than kmalloc() and
     with no recourse to __GFP_COMP, so the pages are not composite.  Instead,
     each page has a reference on it held by the region.  Anything else that is
     interested in such a page will have to get a reference on it to retain it.
     When the pages are released due to unmapping, each page is passed to
     put_page() and will be freed when the page usage count reaches zero.

 (2) Excess pages are trimmed after an allocation as the allocation must be
     made as a power-of-2 quantity of pages.

 (3) VMAs are added to the parent MM's R/B tree and mmap lists.  As an MM may
     end up with overlapping VMAs within the tree, the VMA struct address is
     appended to the sort key.

 (4) Non-anonymous VMAs are now added to the backing inode's prio list.

 (5) Holes may be punched in anonymous VMAs with munmap(), releasing parts of
     the backing region.  The VMA and region structs will be split if
     necessary.

 (6) sys_shmdt() only releases one attachment to a SYSV IPC shared memory
     segment instead of all the attachments at that addresss.  Multiple
     shmat()'s return the same address under NOMMU-mode instead of different
     virtual addresses as under MMU-mode.

 (7) Core dumping for ELF-FDPIC requires fewer exceptions for NOMMU-mode.

 (8) /proc/maps is now the global list of mapped regions, and may list bits
     that aren't actually mapped anywhere.

 (9) /proc/meminfo gains a line (tagged "MmapCopy") that indicates the amount
     of RAM currently allocated by mmap to hold mappable regions that can't be
     mapped directly.  These are copies of the backing device or file if not
     anonymous.

These changes make NOMMU mode more similar to MMU mode.  The downside is that
NOMMU mode requires some extra memory to track things over NOMMU without this
patch (VMAs are no longer shared, and there are now region structs).

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
2009-01-08 12:04:47 +00:00
Harvey Harrison
1af84a6253 sh: introduce asm/swab.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 18:10:27 -08:00
Matthew Wilcox
ea43546750 atomic_t: unify all arch definitions
The atomic_t type cannot currently be used in some header files because it
would create an include loop with asm/atomic.h.  Move the type definition
to linux/types.h to break the loop.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:10 -08:00
Mike Travis
7eb1955336 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
	arch/x86/kernel/io_apic.c
	kernel/rcuclassic.c
	kernel/sched.c
	kernel/time/tick-sched.c

Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:53:31 +01:00
Rusty Russell
33edcf133b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-12-30 08:02:35 +10:30
Linus Torvalds
1db2a5c11e Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (85 commits)
  [S390] provide documentation for hvc_iucv kernel parameter.
  [S390] convert ctcm printks to dev_xxx and pr_xxx macros.
  [S390] convert zfcp printks to pr_xxx macros.
  [S390] convert vmlogrdr printks to pr_xxx macros.
  [S390] convert zfcp dumper printks to pr_xxx macros.
  [S390] convert cpu related printks to pr_xxx macros.
  [S390] convert qeth printks to dev_xxx and pr_xxx macros.
  [S390] convert sclp printks to pr_xxx macros.
  [S390] convert iucv printks to dev_xxx and pr_xxx macros.
  [S390] convert ap_bus printks to pr_xxx macros.
  [S390] convert dcssblk and extmem printks messages to pr_xxx macros.
  [S390] convert monwriter printks to pr_xxx macros.
  [S390] convert s390 debug feature printks to pr_xxx macros.
  [S390] convert monreader printks to pr_xxx macros.
  [S390] convert appldata printks to pr_xxx macros.
  [S390] convert setup printks to pr_xxx macros.
  [S390] convert hypfs printks to pr_xxx macros.
  [S390] convert time printks to pr_xxx macros.
  [S390] convert cpacf printks to pr_xxx macros.
  [S390] convert cio printks to pr_xxx macros.
  ...
2008-12-28 12:33:21 -08:00
Rusty Russell
7479a2939d cpumask: sh: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask
Impact: New APIs

The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these
return a pointer to a struct cpumask.  Part of removing cpumasks from
the stack.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mundt <lethal@linux-sh.org>
2008-12-26 22:23:39 +10:30
Martin Schwidefsky
fc5243d98a [S390] arch_setup_additional_pages arguments
arch_setup_additional_pages currently gets two arguments, the binary
format descripton and an indication if the process uses an executable
stack or not. The second argument is not used by anybody, it could
be removed without replacement.

What actually does make sense is to pass an indication if the process
uses the elf interpreter or not. The glibc code will not use anything
from the vdso if the process does not use the dynamic linker, so for
statically linked binaries the architecture backend can choose not
to map the vdso.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:54 +01:00
Paul Mundt
5d2685d0b3 sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
We don't really want this enabled by default, but it is still quite
useful for debugging. So, make it conditional and leave it off by
default.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt
0146d78759 sh: mrshpc_setup_windows() needs to be inline.
While no one should be including this file multiple times, flag it
inline anyways just in case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt
073da9c0de sh: Kill off cf-enabler with extreme prejudice.
Now that the rest of the boards that were using cf-enabler "generically"
have switched to setting up their mappings on their own, only the mach-se
boards were left using it. All of the cf-enabler using mach-se boards
use a special initialization of the MRSHPC windows rather than going
through the special PTE as other SH-4 platforms do. This consolidates
the MRSHPC setup logic, hooks it up on the boards that care, and gets rid
of any and all remaining references to cf-enabler.

This has been long overdue, as cf-enabler has been the bane of
arch/sh/kernel for the last 7 years. Good riddance.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt
866ef8f48f sh: mach-edosk7705: Fix up edosk7705 so it all builds again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
2125a46083 sh: Kill off dead mv_init_pci() from machvec.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
7b80fb32b3 sh: Kill off mv_heartbeat() from the machvec.
Nothing is using this any more, so get rid of it before anyone gets the
bright idea to start using it again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt
ca0c14e447 sh: Kill off sh_bios_in_gdb_mode().
With the reworked kgdb support, we always detach and reinitialize the
stub. This was mostly a feature for handoffs between sh-ipl+g and the
kgdb stub, but virtually no sh-ipl+g versions ever had this working
right in the first place.

Given that the sh-ipl+g stubs in general use today don't even support
the GDB stub, and we have already killed off the special casing in the
sh-sci serial driver, kill off this now unused symbol too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt
4466b20cfc sh: Add SH-5 optimized memcpy()/memset()/strcpy()/strlen().
Adopted from the uClibc optimized string versions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt
ab6e570ba3 sh: Generic kgdb stub support.
This migrates from the old bitrotted kgdb stub implementation and moves
to the generic stub. In the process support for SH-2/SH-2A is also added,
which the old stub never provided.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt
d7b01f78a3 sh: Enable HAVE_ARCH_TRACEHOOK for all SH, now that SH-5 supports it too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt
dd76279b47 sh: Provide linux/regset.h interface for SH-5.
Plugs in general and FPU regsets.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt
94e2fb3d3e sh: Provide asm/syscall.h for SH-5.
This provides the asm/syscall.h implementation for sh64 parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt
f15b2dc02f sh: Fix up syscall_get_nr() comment in syscall_32.h.
Residual copy-and-paste damage, fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt
35724a0aed sh: Fix up the cpu_asid() return value on nommu.
This ought to be unsigned long, rather than defaulting to int.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Paul Mundt
06be372454 sh: Fix an off-by-1 check in __mutex_fastpath_unlock().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt
77ba93a7ac sh: Fix up the SH-4A mutex fastpath semantics.
This fixes up the __mutex_fastpath_xxx() routines to match the semantics
noted in the comment. Previously these were looping rather than doing a
single-pass, which is counter-intuitive, as the slow path takes care of
the looping for us in the event of contention.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:52 +09:00
Magnus Damm
3e51762759 sh: move the hp6xx pm code
Move the not-so-generic pm code from arch/sh/kernel/pm.c to the
platform directory together with the rest of the hp6xx pm code.

This is done to let non-hp6xx platforms enable CONFIG_PM.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:52 +09:00
Magnus Damm
21c601bb2e sh: remove ioport cruft and smc91x from se7343
Remove out-of-date se7343 ioport code including some old support
for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical
smc91x that once must have been on a special daughterboard.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm
6aacba72db sh: add st16c2550 devices to se7343
Add 8250 platform data to setup the ST16C2550C chip on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Peter Griffin
2825999e8a sh: Add support for SH7201 CPU subtype.
This patch adds support for the SH-2A FPU based SH7201 processor subtype.

Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:50 +09:00
Paul Mundt
22f131aa8d sh: Provide a dyn_arch_ftrace struct definition.
Needed for dynamic ftrace API changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:50 +09:00
Paul Mundt
eb67cf14ae sh: Consolidate cpu_relax()/cpu_sleep() definitions across _32/_64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:50 +09:00
Paul Mundt
9cfc9a9b6f sh: Add a simple code dumper for SUPERH32 show_regs().
This implements a simple show_code() that is in turn plugged in to
show_regs() to provide minimal code dumping at the end of the trace.

Built on top of a simple instruction disassembler derived from the
binutils opcode table.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:49 +09:00
Paul Mundt
95b781c239 sh: Provide optimized unaligned loads on SH-4A.
This adds support for unaligned loads on SH-4A, using the SH-4A's
neutered movua.l instruction. As movua.l is r0-inspired, stores are
still handled through the packed struct.

Based on asm-generic/unaligned.h by Harvey Harrison.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:48 +09:00
Magnus Damm
716777db72 sh: P4 ioremap pass-through
This patch adds a pass-through case when ioremapping P4 addresses.

Addresses passed to ioremap() should be physical addresses, so the
best option is usually to convert the virtual address to a physical
address before calling ioremap. This will give you a virtual address
in P2 which matches the physical address and this works well for
most internal hardware blocks on the SuperH architecture.

However, some hardware blocks must be accessed through P4. Converting
the P4 address to a physical and then back to a P2 does not work. One
example of this is the sh7722 TMU block, it must be accessed through P4.

Without this patch P4 addresses will be mapped using PTEs which
requires the page allocator to be up and running.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:48 +09:00
Michael Trimarchi
0c9122323a sh: Add SH-4A optimized fastpath mutex implementation.
Add fast mutex path implementation for the SH4A architecture

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:55 +09:00
Steve Glendinning
8085ac7531 sh: Add platform-specific constants for SH7709
I'm using these constants in support of an in-house development board,
and thought they may be useful to other users of SH7709.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:54 +09:00
Paul Mundt
0d5bbe0bc2 sh: Provide optimized non-atomic bitops for SH-2A.
This ties in the new SH-2A 32-bit non-atomic bitops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:54 +09:00
Paul Mundt
16b529d1d7 sh: Convert to generic bitops for IRQ-toggling implementation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:53 +09:00
Matt Fleming
fad57feba7 sh: dynamic ftrace support.
First cut at dynamic ftrace support.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Rusty Russell
968ea6d80e Merge ../linux-2.6-x86
Conflicts:

	arch/x86/kernel/io_apic.c
	kernel/sched.c
	kernel/sched_stats.h
2008-12-13 21:55:51 +10:30
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Ingo Molnar
1c39194878 sched: convert struct root_domain to cpumask_var_t, fix
Mathieu Desnoyers reported this build failure on powerpc:

 kernel/sched.c: In function 'sd_init_NODE':
 kernel/sched.c:7319: error: non-static initialization of a flexible array member
 kernel/sched.c:7319: error: (near initialization for '(anonymous)')

this happens because .span changed to cpumask_var_t, hence
the static CPU_MASK_NONE initializers in the SD_*_INIT
templates are not type-correct anymore.

Remove them, as they default to empty anyway.

Also remove them from IA64, MIPS and SH.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 14:14:07 +01:00
Paul Mundt
185aed7557 sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB.
With the PMB enabled, only P1SEG and up are covered by the PMB mappings,
meaning that situations where out-of-bounds physical addresses are read
from will lead to TLB reset after the PMB miss, allowing for use cases
like dd if=/dev/mem to reset the TLB.

Fix this up to make sure the reference is between __MEMORY_START (phys)
and __pa(high_memory). This is coherent across all variants of sh/sh64
with and without MMU, though the PMB bug itself is only applicable to
SH-4A parts.

Reported-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-12 12:53:48 +09:00
Paul Mundt
acca4f4d9b sh: Handle fixmap TLB eviction more coherently.
There was a race in the kmap_coherent() implementation. While we
guarded against preemption, there was nothing preventing eviction of
the pre-faulted fixmap entry from the UTLB. Under certain workloads
this would result in the fixmap entries used for cache colouring being
evicted from the UTLB in the midst of a copy_page().

In addition to pre-faulting, we also make sure to preserve the PTEs
in the kernel page table and introduce a cached PTE for kmap_coherent()
usage. This follows a similar change on MIPS ("[MIPS] Fix aliasing bug
in copy_to_user_page / copy_from_user_page").

Reported-by: Hideo Saito <saito@densan.co.jp>
Reported-by: CHIKAMA Masaki <masaki.chikama@gmail.com>
Tested-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-10 20:00:45 +09:00
Harvey Harrison
1406266732 sh: use the new byteorder headers.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31 16:01:22 +09:00
Paul Mundt
3eeebf17f3 sh: Kill off long-dead HD64465 cchip support.
This code has been dead for many years. The last update it received
was in 2003 in order to update it for the driver model changes, though
it had already been in disarray and unused before that point. The only
boards that ever used this chip have not had users in many years either,
so it is finally safe to just kill it off and move on with life.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28 20:07:44 +09:00
Paul Mundt
b4d36a254f sh: Add on-chip RTC support for SH7722.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28 18:40:19 +09:00
Paul Mundt
e4b41dbd60 sh: asm/gpio.h needs linux/kernel.h for might_sleep()/WARN_ON().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-23 12:37:20 +09:00
Paul Mundt
61dc6eaeef sh: mach-highlander: Handle SCIF pinmuxing on R7785RP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-23 12:35:43 +09:00
Magnus Damm
0835f127e5 sh: sh7785 pinmux support
This patch implements pinmux tables for the sh7785 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-23 11:59:37 +09:00
Magnus Damm
42eed42bac sh: improve pinmux support for single direction pins
This patch improves the support for gpio pins that are hard wired
to either input or output and lack control register association.
A special force enum id is used to allow use without control
register but still mark the gpio pin as input or output.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-22 18:34:16 +09:00
Paul Mundt
c9306f0efb sh: Wire up oops reporting in the die notifier chain.
Commit 3f5a54e371 ("ftrace: dump out ftrace
buffers to console on panic") added an ftrace buffer dumper that hooks
in to the die notifier chain and dumps out data in the oops path.

Unfortunately SH supported ftrace but didn't support DIE_OOPS, so add
that in and get it building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 18:33:36 +09:00
Paul Mundt
5501093784 sh: gpio: Stub in dummy GPIO<->IRQ mapping routines.
IRQ modes are not presently supported, so stub in dummy definitions
for now (taken from linux/gpio.h).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 17:48:40 +09:00
Paul Mundt
10bfc6e190 sh: gpio: Include asm-generic/gpio.h for non-gpiolib stubs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 14:27:05 +09:00
Paul Mundt
40e24c403f sh: Move SH-4 CPU headers down one more level.
These accidentally got placed in to cpu-sh4 instead of cpu-sh4/cpu, push
them down one more level.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 14:30:17 +09:00
Paul Mundt
7639a4541f sh: Migrate common board headers to mach-common/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 13:02:48 +09:00
Paul Mundt
f727565013 sh: Move the CPU definition headers from asm/ to cpu/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 12:04:53 +09:00
Magnus Damm
a30c89ad41 sh: reduce Migo-R smc91x overruns
Improve Migo-R ethernet performance by reducing smc91x overruns.
This is done by enabling SMC91X_NOWAIT and optimizing CS4 setup.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 11:38:35 +09:00
Paul Mundt
9a19eb2a66 sh: Fix up some merge damage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 11:37:58 +09:00
Paul Mundt
4cb40f795a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	Documentation/kernel-parameters.txt
	arch/sh/include/asm/elf.h
2008-10-20 11:17:52 +09:00
Magnus Damm
c9c3c1b74d sh: Add sh7720 pinmux code
This patch adds pinmux and gpio support for the sh7720 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:25 +09:00
Magnus Damm
41e4a9a5e2 sh: Add sh7203 pinmux code
This patch adds pinmux and gpio support for the sh7203 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:18 +09:00
Magnus Damm
0436ec15ae sh: Add sh7723 pinmux code
This patch adds pinmux and gpio support for the sh7723 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:12 +09:00
Magnus Damm
8d7b5b0af7 sh: Add sh7722 pinmux code
This patch adds pinmux and gpio support for the sh7722 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:05 +09:00
Magnus Damm
2967dab1ae sh: GPIO and pinmux base code
This patch adds gpio code together with the pinmux table parser.
In the future we should optimize this and switch back to gpiolib.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:33:50 +09:00
Martin Schwidefsky
0b59268285 [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
The SET_PERSONALITY macro is always called with a second argument of 0.
Remove the ibcs argument and the various tests to set the PER_SVR4
personality.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-16 15:40:05 +02:00
Paul Mundt
14866543ad sh: More I/O routine overhauling.
This tidies up a lot of the PIO/MMIO split. No in-tree platforms were
making use of the MMIO overloading through the machvec (nor have any of
them been in some time), so we just kill all of that off. The ISA I/O
routine wrapping remains unaffected, which remains the only special
casing outside of the iomap API that boards need to think about.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-04 05:25:52 +09:00
Paul Mundt
225c9a8d1d video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.
This provides a workaround for users of sh_mobile_lcdcfb that don't
define HAVE_CLK and have otherwise sane clock initialization.

At the same time, move the sh_mobile_lcdc.h header to include/video/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 16:24:32 +09:00
Paul Mundt
bbfbd8b151 sh: Move the shared INTC code out to drivers/sh/
The INTC code will be re-used across different architectures, so move
this out to drivers/sh/ and include/linux/sh_intc.h respectively.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 16:13:54 +09:00
Paul Mundt
64c9627c26 sh: Fix up the __raw_read/writeX() definitions.
These were doing largely bogus things and using the wrong typing for
the address. Bring these in line with the ARM definitions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 15:12:27 +09:00
Paul Mundt
50b72e600b sh: sh_ksyms_64 needs __strncpy_from_user() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 19:45:16 +09:00
Paul Mundt
88856d67cf sh: Fix up uaccess_64 put/get_user() cast warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 19:43:44 +09:00