Commit Graph

3208 Commits

Author SHA1 Message Date
Stephen Rothwell
9e4859ef54 [POWERPC] FWNMI is only used on pSeries
This saves 4k on non pSeries builds (except for iSeries where it saves
almost 4k).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Stephen Rothwell
ee7a76da1e [POWERPC] Size swapper_pg_dir correctly
David Gibson pointed out that swapper_pg_dir actually need to be
PGD_TABLE_SIZE bytes long not PAGE_SIZE.  This actually saves 64k in
the bss for a kernel ppc64_defconfig built with CONFIG_PPC_64K_PAGES.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Stephen Rothwell
19a8d97d89 [POWERPC] Remove cmd_line from head*.S
It is just a C char array, so declare it thusly.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Stephen Rothwell
7b2c3c5b1d [POWERPC] Fix section mismatch in PCI code
Create a helper function (alloc_maybe_bootmem) that is marked __init_refok
to limit the chances of mistakenly referring to other __init routines.

WARNING: vmlinux.o(.text+0x2a9c4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.update_dn_pci_info' and '.pci_dn_reconfig_notifier')
WARNING: vmlinux.o(.text+0x36430): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.mpic_msi_init_allocator' and '.find_ht_magic_addr')
WARNING: vmlinux.o(.text+0x5e804): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x5e8e8): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x5e968): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Domen Puncer
ee983079ce [POWERPC] MPC5200 low power mode
Low-power mode implementation for Lite5200b.
Some I/O registers are also saved here.

A recent U-Boot that supports this (lite5200b_PM_config) is needed.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Michael Ellerman
104f0cc2dc [POWERPC] spufs: Add DEFINE_SPUFS_ATTRIBUTE()
This patch adds DEFINE_SPUFS_ATTRIBUTE(), a wrapper around
DEFINE_SIMPLE_ATTRIBUTE which does the specified locking for the get
routine for us.

Unfortunately we need two get routines (a locked and unlocked version) to
support the coredump code.  This hides one of those (the locked version)
inside the macro foo.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
9e25ae6d91 [POWERPC] spufs: Respect RLIMIT_CORE in spu coredump code
Currently the spu coredump code doesn't respect the ulimit, it should.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
7af1443a9d [POWERPC] spufs: Handle errors in SPU coredump code, and support coredump to a pipe
Rework spufs_coredump_extra_notes_write() to check for and return errors.

If we're coredumping to a pipe we can't trust file->f_pos, we need to
maintain the foffset value passed to us. The cleanest way to do this is
to have the low level write routine increment foffset when we've
successfully written.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
e55014923e [POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.

Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.

Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.

Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.

We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works).  So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.

It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
48cad41f7e [POWERPC] spufs: Combine spufs_coredump_calls with spufs_calls
Because spufs might be built as a module, we can't have other parts of the
kernel calling directly into it, we need stub routines that check first if the
module is loaded.

Currently we have two structures which hold callbacks for these stubs, the
syscalls are in spufs_calls and the coredump calls are in spufs_coredump_calls.
In both cases the logic for registering/unregistering is essentially the same,
so we can simplify things by combining the two.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
78810ff672 [POWERPC] spufs: Add contents of npc file to SPU coredumps
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
74de08bc10 [POWERPC] spufs: Internal __spufs_get_foo() routines should take a spu_context *
The SPUFS attribute get routines take a void * because the generic attribute
code doesn't know what sort of data it's passing around.

However our internal __spufs_get_foo() routines can take a spu_context *
directly, which saves plonking it in and out of a void * again.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:18 +10:00
Michael Ellerman
936d5bf1d7 [POWERPC] spufs: Get rid of spufs_coredump_num_notes, it's not needed if we NULL terminate
The spufs_coredump_read array is NULL terminated, and we also store the size.
We only need one or the other, and the other arrays in file.c are NULL
terminated, so do that.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:18 +10:00
Michael Ellerman
c1a72173ab [POWERPC] spufs: Don't return -ENOSYS as extra notes size if spufs is not loaded
Because the SPU coredump code might be built as part of a module (spufs),
we have a stub which is called by the coredump code, this routine then calls
into spufs if it's loaded.

Unfortunately the stub returns -ENOSYS if spufs is not loaded, which is
interpreted by the coredump code as an extra note size of -38 bytes. This
leads to a corrupt core dump.

If spufs is not loaded there will be no SPU ELF notes to write, and so the
extra notes size will be == 0.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:18 +10:00
Michael Ellerman
59000b53c7 [POWERPC] spufs: Correctly calculate the size of the local-store to dump
The routine to dump the local store, __spufs_mem_read(), does not take the
spu_lslr_RW value into account - so we shouldn't check it when we're
calculating the size either.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:18 +10:00
Michael Ellerman
d464fb4410 [POWERPC] spufs: Write some SPU coredump values as ASCII
Unfortunately GDB expects some of the SPU coredump values to be identical
in format to what is found in spufs. This means we need to dump some of
the values as ASCII strings, not the actual values.

Because we don't know what the values will be, we always print the values
with the format "0x%.16lx", that way we know the result will be 19 bytes.

do_coredump_read() doesn't take a __user buffer, so remove the annotation,
and because we know that it's safe to just snprintf() directly to it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:18 +10:00
Michael Ellerman
4fca9c4250 [POWERPC] spufs: Use computed sizes/#defines rather than literals in SPU coredump code
The spufs_coredump_reader array contains the size of the data that will be
returned by the read routine.  Currently these are specified as literals,
and though some are obvious, sizeof(u32) == 4, others are not, 69 * 8 ==  ???

Instead, use sizeof() whatever type is returned by each routine, or in
the case of spufs_mem_read() the #define LS_SIZE.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Michael Ellerman
9a5080f11d [POWERPC] spufs: Call spu_acquire_saved() before calculating the SPU note sizes
It makes sense to stop the SPU processes as soon as possible.  Also if we
dont acquire_saved() I think there's a possibility that the value in
csa.priv2.spu_lslr_RW won't be accurate.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Michael Ellerman
f9b7bbe7a8 [POWERPC] spufs: Remove ctx_info and ctx_info_list
Remove the ctx_info struct entirely, and also the ctx_info_list.  This
fixes a race where two processes can clobber each other's ctx_info structs.

Instead of using the list, we just repeat the search through the file
descriptor table.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Michael Ellerman
a595ed662c [POWERPC] spufs: Extract the file descriptor search logic in SPU coredump code
Extract the logic for searching through the file descriptors for spu contexts
into a separate routine, coredump_next_context(), so we can use it elsewhere
in future.  In the process we flatten the for loop, and move the NOSCHED test
into coredump_next_context().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Jeremy Kerr
c70d4ca52b [POWERPC] cell: Remove DEBUG for SPU callbacks
We don't want SPE programs to be able to flood the kernel log by
invoking the SPE callback handler, so don't enable DEBUG for
spu_callbacks.c by default.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Jeremy Kerr
05a059f329 [POWERPC] spufs: Fix restore_decr_wrapped() to match CBE Handbook
Based on an original patch from Masato Noguchi
<Masato.Noguchi@jp.sony.com>.

We're currently not restoring the SPE decrementer as specified by the
CBE handbook. This change fixes our implementation to match, and makes
the function read more like the docs.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Jeremy Kerr
98f06978ff [POWERPC] cell: Unify spufs syscall path
At present, a built-in spufs will not use the spufs_calls callbacks, but
directly call sys_spu_create.  This saves us an indirect branch, but
means we have duplicated functions - one for CONFIG_SPU_FS=y and one for
=m.

This change unifies the spufs syscall path, and provides access to the
spufs_calls structure through a get/put pair.  At present, the only user
of the spufs_calls structure is spu_syscalls.c, but this will facilitate
adding the coredump calls later.

Everyone likes numbers, right?  Here's a before/after comparison with
CONFIG_SPU_FS=y, doing spu_create(); close(); 64k times.

Before:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.075s
	user    0m0.146s
	sys     0m23.925s

After:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.777s
	user    0m0.141s
	sys     0m24.631s

So, we're adding around 11us per syscall, at the benefit of having
only one syscall path.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Andre Detsch
36ddbb1380 [POWERPC] spufs: Fix race condition on gang->aff_ref_spu
Affinity reference point location (gang->aff_ref_spu) is reset
when the whole gang is descheduled. However, the last member of
a gang can be descheduled while we are trying to schedule another
member of the gang. This was leading to a race condition, and
the code was using gang->aff_ref_spu in an unsafe manner.

By holding the gang->aff_mutex a little bit longer, and increment
gang->aff_sched_count (which controls when gang->aff_ref_spu
should be reset) a little bit earlier, the problem is fixed.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Sebastian Siewior
8b0d3121a0 [POWERPC] spufs: Make isolated loader properly aligned
According to the comment in spufs_init_isolated_loader(), the isolated
loader should be aligned on a 16 byte boundary.
ARCH_{KMALLOC,SLAB}_MINALIGN is not defined so only 8 byte alignment is
guaranteed.

This enforces alignment via __get_free_pages.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Jeremy Kerr
6232a74f25 [POWERPC] spufs: Remove spu_harvest
Based on an initial patch from Sebastian Siewior
<sebastian@breakpoint.cc>

spu_harvest isn't used, remove it.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Jeremy Kerr
1e8b0f6d1b [POWERPC] spufs: Remove asmlinkage from do_spu_create
do_spu_create doesn't need the asmlinkage qualifier; remove it.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Sebastian Siewior
1238819a41 [POWERPC] spufs: Make file-internal functions & variables static
There are a few symbols used only in one file within spufs; this change
makes them static where suitable.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Michael Neuling
00efee7d5d [POWERPC] Remove barriers from the SLB shadow buffer update
After talking to an IBM POWER hypervisor (PHYP) design and development
guy, there seems to be no need for memory barriers when updating the SLB
shadow buffer provided we only update it from the current CPU, which we
do.

Also, these guys see no need in the future for these barriers.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 14:40:54 +10:00
Jesper Juhl
61a564fd2e [POWERPC] Don't cast kmalloc return value in ibmebus.c
kmalloc() returns a void pointer so there is absolutely no need to
cast it in ibmebus_chomp().

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 14:40:54 +10:00
Anton Vorontsov
8237bf080e [POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stub
Enabled using SPI controller on the MPC832x RDB board.  We currently use
a modalias of "spidev" as a place holder (replace with "mmc_spie") until
the mmc_spi driver support is merged in.

This gets us the ability to test SPI until then.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:54:13 -05:00
Anton Vorontsov
26f6cb9993 [POWERPC] fsl_soc: add support for fsl_spi
Add helper function to setup SPI bus/device information

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:54:09 -05:00
Kumar Gala
748a768384 [POWERPC] Fix modpost warnings from head*.S on ppc32
We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:36 -05:00
Kumar Gala
5e14d21e3f [POWERPC] Add cpu feature for SPE handling
Make it so that SPE support can be determined at runtime.  This is similiar
to how we handle AltiVec.  This allows us to have SPE support built in and
work on processors with and without SPE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:30 -05:00
Kumar Gala
d8f1324a50 [POWERPC] 83xx: Removed PCI exclude of PHB
Now that the generic code doesn't assign resources for Freescale
PHBs we dont have to explicitly exclude it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:26 -05:00
Kumar Gala
1b3c5cdab4 [POWERPC] Move PCI nodes to be sibilings with SOC nodes
Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:22 -05:00
Kumar Gala
f0c8ac8083 [POWERPC] DTS cleanup
Removed the following cruft from .dts files:
* 32-bit in cpu node -- doesn't exist in any spec and not used by kernel
* removed built-in (chrp legacy)
* Removed #interrupt-cells in places they don't need to be set
* Fixed ranges on lite5200*
* Removed clock-frequency from i8259 pic node, not sure where this came from
* Removed big-endian from i8259 pic nodes, this was just bogus

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:16 -05:00
Kumar Gala
5d54ddcbcf [POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS port
Added basic board port for MPC8572 DS reference platform that is
similiar to the MPC8544/33 DS reference platform in uniprocessor mode.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:54 -05:00
Kumar Gala
26caeb2ee1 [POWERPC] Handle alignment faults on SPE load/store instructions
This adds code to handle alignment traps generated by the following
SPE (signal processing engine) load/store instructions, by emulating
the instruction in the kernel (as is done for other instructions that
generate alignment traps):

evldd[x]         Vector Load Double Word into Double Word [Indexed]
evldw[x]         Vector Load Double into Two Words [Indexed]
evldh[x]         Vector Load Double into Four Half Words [Indexed]
evlhhesplat[x]   Vector Load Half Word into Half Words Even and Splat [Indexed]
evlhhousplat[x]  Vector Load Half Word into Half Word Odd Unsigned and Splat [Indexed]
evlhhossplat[x]  Vector Load Half Word into Half Word Odd Signed and Splat [Indexed]
evlwhe[x]        Vector Load Word into Two Half Words Even [Indexed]
evlwhou[x]       Vector Load Word into Two Half Words Odd Unsigned (zero-extended) [Indexed]
evlwhos[x]       Vector Load Word into Two Half Words Odd Signed (with sign extension) [Indexed]
evlwwsplat[x]    Vector Load Word into Word and Splat [Indexed]
evlwhsplat[x]    Vector Load Word into Two Half Words and Splat [Indexed]
evstdd[x]        Vector Store Double of Double [Indexed]
evstdw[x]        Vector Store Double of Two Words [Indexed]
evstdh[x]        Vector Store Double of Four Half Words [Indexed]
evstwhe[x]       Vector Store Word of Two Half Words from Even [Indexed]
evstwho[x]       Vector Store Word of Two Half Words from Odd [Indexed]
evstwwe[x]       Vector Store Word of Word from Even [Indexed]
evstwwo[x]       Vector Store Word of Word from Odd [Indexed]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:48 -05:00
Scott Wood
f923473611 [POWERPC] fsl_soc.c cleanup
1. Update the way get_brgfreq() finds things in the device tree.

It now uses names that are less namespace polluting.  The old names
are supported until all boards are converted.

2. "size" is changed from unsigned int to int, to match what
of_get_property() expects.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:43 -05:00
Jon Loeliger
683d00b03e [POWERPC] 85xx: Remove unnecessary loops_per_jiffy initialization code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:36 -05:00
Jon Loeliger
d347b3291b [POWERPC] 86xx: Remove unnecessary loops_per_jiffy initialization code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:32 -05:00
Guennadi Liakhovetski
7f2862c345 [POWERPC] linkstation updates
1. Fix RTC type - it is a rs5c372a, not rs5c372b
2. Configure both UART interrupts edge-triggered
3. Add a license header to ls_uart.c
4. Check for running on linkstation in a late_initcall() function. Needed
   for multiplatform builds, even though linkstation doesn't support them
   yet
5. Remove unneeded #include from linkstation.c

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:27 -05:00
Kumar Gala
7f50382dc8 [POWERPC] 85xx: Clean up from 85xx_ds rename
Renamed functions in 85xx_ds from 8544 to 85xx.

Kept an unique machine def/probe for the MPC8544 DS board to
handle some subtle differences between the future board based
on the DS platform.

Also fixed building w/o CONFIG_PCI and minor whitespace fixes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13 15:45:03 -05:00
Kumar Gala
16d24060d1 [POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.c
Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more
generic in prep for other boards based on the same platform.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13 15:43:48 -05:00
Geoff Levand
75cdff9242 [POWERPC] PS3: Enhance storage probe debug output
Add some more info to the PS3 storage probe debug output.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:26 +10:00
Jeremy Kerr
85d02924a3 [POWERPC] PS3: Fix CONFIG_SMP=n, CONFIG_KEXEC=y build
Currently, the ps3 kernel fails to build without smp but with kexec, as
ps3_kexec_cpu_down needs ps3_smp_cleanup_cpu, which isn't defined on UP
kernels. This change adds an empty ps3_smp_cleanup_cpu for UP kernels.

Booted on ps3.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
Olof Johansson
0d72ba930c [POWERPC] Add workaround for MPICs with broken register reads
Some versions of PWRficient 1682M have an interrupt controller in which
the first register in each pair for interrupt sources doesn't always
read with the right polarity/sense values.

To work around this, keep a software copy of the register instead.  Since
it's not modified from the mpic itself, it's a feasible solution.  Still,
keep it under a config option to avoid wasting memory on other platforms.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
David Gibson
2099172d61 [POWERPC] Document and implement an improved flash device binding for powerpc
This replaces the binding for flash chips in booting-without-of.txt
with an clarified and improved version.  It also makes
drivers/mtd/maps/physmap_of.c recognize this new binding.  Finally it
revises the Ebony device tree source to use the new binding as an
example.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
Linas Vepstas
3c607ce2a3 [POWERPC] setup_64.c and prom.c comment cleanup
Grammatical corrections to comments.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:24 +10:00
Linas Vepstas
70c6cc37db [POWERPC] prom.c whitespace cleanup
Whitespace cleanup: badly indented lines.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:24 +10:00
Linas Vepstas
e788ff13be [POWERPC] prom_init whitespace cleanup, typo fix
Whitespace cleanup: badly indented lines.
Typo in comment.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:24 +10:00
Scott Wood
bde6c6e16a [POWERPC] Check _PAGE_RW and _PAGE_PRESENT on kernel addresses
Previously, the TLB miss handlers assumed that pages above KERNELBASE are
always present and read/write.  This assumption is false in the case of
CONFIG_DEBUG_PAGEALLOC.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
Scott Wood
96ebc3bfb6 [POWERPC] bootwrapper: Only print MAC addresses when the node is actually present
Some firmwares (such as PlanetCore) only provide a base MAC address, and
expect the kernel to set certain bits to generate the addresses for the
other ports.  As such, MAC addresses are generated that may not correspond
to actual hardware.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
Scott Wood
21f3fe2f7a [POWERPC] bootwrapper: Add get_path()
This will be used by the PlanetCore firmware support to construct
a linux,stdout-path from the serial node that it finds.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
Scott Wood
9de782770b [POWERPC] bootwrapper: Add strtoull()
This will be needed by PlanetCore firmware support.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
Scott Wood
4674f2f339 [POWERPC] bootwrapper: flatdevtree fixes
1. ft_create_node was returning the internal pointer rather than a phandle.
2. ft_find_device_rel was treating a "top" phandle of NULL as an error,
rather than as the root of the tree.  The old, absolute ft_find_device
is removed, and the relative version is renamed to ft_find_device().

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
Olof Johansson
6bcc4c0175 [POWERPC] Remove warning in arch/powerpc/kernel/sysfs.c
Fixes:

arch/powerpc/kernel/sysfs.c: In function 'cpu_add_sysdev_attr_group':
arch/powerpc/kernel/sysfs.c:388: warning: ignoring return value of
	'sysfs_create_group', declared with attribute warn_unused_result

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:22 +10:00
Olof Johansson
a416561bf7 [POWERPC] Move lowlevel runlatch calls under cpu feature control
There's no need to call the runlatch on functions on processors that
don't implement them (CPU_FTR_CTRL).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:22 +10:00
Olof Johansson
01f1c735f5 [POWERPC] Remove unused platform_machine_check()
Remove leftover cruft from ARCH=ppc.

There are no users of platform_machine_check() in ARCH=powerpc, and none
should be added (they should use ppc_md.machine_check_handler instead).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:22 +10:00
Olof Johansson
3850169dbd [POWERPC] pasemi: Move pasemi_idle_init() to late_initcall()
Move pasemi_idle_init() to be a late_initcall instead of being called from
setup_arch().  This way the cpufreq driver has a chance to initialize and
save away the boot time astate before we go to idle for the first time.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:22 +10:00
Olof Johansson
cd7834167f [POWERPC] pasemi: Print more information at machine check
Add printout of some SoC error status registers, and dump the SLB contents
for those machine check events where it makes sense.

Since we can't go about and ioremap registers at machine check time,
and we generally want to do as little as possible to print out the
information, pre-build a table of the registers to dump and their address
in the common PCI config space range.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Olof Johansson
2e1957fd47 [POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=y
Export some of the implementation-specific registers via sysfs.
Useful when debugging, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Olof Johansson
4d442331e5 [POWERPC] pasemi: Add workaround for erratum 5945
Erratum 5945 causes some of the registers on the PCIe root ports to
not read correctly.  Do a small dance to avoid this: Write an unused
register, read the value and write it back.  Thankfully this is not in
a hot code path.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Olof Johansson
68c8404c74 [POWERPC] pasemi: Add pasemi_pci_getcfgaddr()
Add pasemi_pci_getcfgaddr(), to get the remapped address of a specific
config register for a PCI device.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Olof Johansson
a302cb9d95 [POWERPC] Export new __io{re,un}map_at() symbols
Export new __io{re,un}map_at() symbols so modules can use them.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Michael Ellerman
60b332e755 [POWERPC] Export virq mapping via debugfs
This adds a debugfs file "powerpc/virq_mapping", which shows the virtual
to real mapping of irq numbers.  Enable it with CONFIG_VIRQ_DEBUG.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Chen Gong <G.Chen@freescale.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Michael Ellerman
7866291d4c [POWERPC] Initialise hwirq for legacy irqs
Although no one uses the hwirq value for legacy irqs at the moment, we
should really setup the correct value in the irq_map.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Michael Ellerman
6815800601 [POWERPC] Provide a default irq_host match, which matches on an exact of_node
The most common match semantic is an exact match based on the device node.
So provide a default implementation that does this, and hook it up if no
match routine is specified.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Michael Ellerman
8528ab84eb [POWERPC] Invert null match behaviour for irq_hosts
Currently if you don't specify a match callback for your irq_host it's
assumed you match everything. This is a kind of opt-out approach, and
turns out to be the exception rather than the rule.

So change the semantics to be opt-in, ie. you don't match anything unless
you provide a match callback.  This in itself isn't very useful, but will
allow us to provide a default match implementation in a subsequent patch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Michael Ellerman
52964f87c6 [POWERPC] Add an optional device_node pointer to the irq_host
The majority of irq_host implementations (3 out of 4) are associated
with a device_node, and need to stash it somewhere. Rather than having
it somewhere different for each host, add an optional device_node pointer
to the irq_host structure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
David Gibson
0ae0b54565 [POWERPC] Move bootwrapper's strchr() and strncmp() from .h to string.S
Currently the bootwrapper has implementations of strchr() and
strncmp(), but they're inlines in flatdevtree_env.h, rather than in
string.S with all the rest of the string functions.  This moves
them to string.S.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:19 +10:00
Linas Vepstas
768cc2d3b2 [POWERPC] IOMMU virtual merge is no longer experimental
Per conversations with BenH, IOMMU virtual merging should no longer
be considered to be an "experimental" feature.  In particular,
CONFIG_VMERGE has been set to "y" in the defconfigs for quite a while.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

----
 arch/powerpc/Kconfig |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:19 +10:00
Paul Mackerras
b2315372ea Merge branch 'linux-2.6' into for-2.6.24 2007-09-14 01:24:25 +10:00
Linus Torvalds
c87ce65868 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Move serial_dev_init to device_initcall()
  [POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue
  [POWERPC] cpm2: Fix off-by-one error in setbrg().
  [PPC] 8xx: Fix r3 trashing due to 8MB TLB page instantiation
  [POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCI
2007-09-12 12:23:51 -07:00
Olof Johansson
ee56c47440 [POWERPC] Move serial_dev_init to device_initcall()
With the I/O space rewrite by BenH, the legacy_serial serial_dev_init()
initcall is now called before I/O space is setup, but it's dependent on
it being available.

Since there's no way to make dependencies between initcalls, we'll just
have to move it to device_initcall(). Yes, it's suboptimal but I'm not
aware of any better solution at this time, and it fixes a regression
from 2.6.22.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-13 04:09:14 +10:00
Kumar Gala
fb4f0e8832 [POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue
Since the ULI1575 has a ISA bus we need to enable the generic ISA dma
support for drivers that might expect it.  Without this we get compile
errors like the following:

ound/built-in.o: In function `claim_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
sound/built-in.o: In function `release_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:195: undefined reference to `dma_spin_lock'
sound/built-in.o: In function `claim_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
sound/built-in.o:/home/galak/git/linux-8572/include/asm/dma.h:195: more undefined references to `dma_spin_lock' follow
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-12 10:41:10 -05:00
Scott Wood
83fcdb4b35 [POWERPC] cpm2: Fix off-by-one error in setbrg().
The hardware adds one to the BRG value to get the divider, so it must
be subtracted by software.  Without this patch, characters will occasionally
be corrupted.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-10 16:02:09 -05:00
Kumar Gala
2af8569dc9 [POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCI
We needed some ifdef CONFIG_PCI protection for pcibios_fixup so we
can build !CONFIG_PCI.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-10 16:00:09 -05:00
Joachim Fenkes
d8612417b2 [POWERPC] ibmebus: Prevent bus_id collisions
Previously, ibmebus derived a device's bus_id from its location code.
The location code is not guaranteed to be unique, so we might get bus_id
collisions if two devices share the same location code.  The OFDT
full_name, however, is unique, so we use that instead (truncating it
on the left if it is too long).

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:37 +10:00
Geert Uytterhoeven
d51dd3de87 [POWERPC] cell/PS3: Ignore storage devices that are still being probed
On PS3, A storage device may show up in the repository before the hypervisor
has finished probing:
  - If its type is not yet known, it shows up as PS3_DEV_TYPE_STOR_DUMMY,
  - If its regions are being probed, it shows up as having zero regions.
If any of these happen, consider the device not yet present.  The storage
probe thread will retry later.

This fixes the timing-dependent problem where a kernel booted from FLASH ROM
sometimes cannot find the hard disk.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:37 +10:00
Jeremy Kerr
ef8034d01a [POWERPC] cell/PS3: Always set master run control bit in mfc_sr1_set
At present, running any SPE program on the ps3 will trigger a BUG_ON
when spufs_run_spu tries to clear the master run control bit, as lv1
does not make the master run control available to Linux.

This change makes SPE apps work again by disabling changes to the
master run control on PS3.  Although we don't have the facility to
disable a SPE with supervisor-level privileges, it's better than
hitting the BUG_ON unconditionally.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:36 +10:00
Masato Noguchi
b7f90a406f [POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 interrupt.
The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt
is edge-triggered.  The current spu interrupt handler assumes this
behavior and does not clear the interrupt status.

The PS3 hypervisor visualizes all SPU interrupts as level, and on return
from the interrupt handler the hypervisor will deliver a new virtual
interrupt for any unmasked interrupts which for which the status has not
been cleared.  This fix clears the interrupt status in the interrupt
handler.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:36 +10:00
Josh Boyer
5326152fa1 [POWERPC] Walnut zImage wrapper
Add zImage wrapper for walnut board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:51:44 -05:00
Josh Boyer
545c069ccd [POWERPC] Walnut board support
Board support for the PPC405 Walnut evaluation board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:51:24 -05:00
Josh Boyer
7f2814d229 [POWERPC] Walnut defconfig
Walnut board defconfig

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:51:08 -05:00
Josh Boyer
8852ab7afc [POWERPC] Walnut DTS
Device tree source file for the PPC405 Walnut evaluation board.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:50:50 -05:00
Josh Boyer
1f6e579521 [POWERPC] Fix bus probe on Bamboo board
Commit 804ace8881 changed the behavior of how compatible nodes are found.
This highlighted a bug on the Bamboo board where it wasn't probing the bus
specified in the DTS file.  We fix it by being explicit about which bus to
probe.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbvear.id.au>
2007-09-07 07:50:26 -05:00
Josh Boyer
c9c6b744d8 [POWERPC] Remove dtc build cruft from DTS files
The patch below removes the dtc incantation instructions from the
in-kernel DTS files.  It's not needed, and is prone to being
out-of-date most of the time.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:49:59 -05:00
Valentine Barshak
606d08bcd6 [POWERPC] PowerPC 440EPx: Sequoia bootwrapper
Bootwrapper code for AMCC PPC440EPx Sequoia.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:49:28 -05:00
Valentine Barshak
15fc993e31 [POWERPC] PowerPC 440EPx: Sequoia board support
AMCC PPC440EPx Sequoia board support.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:49:13 -05:00
Valentine Barshak
38a5d6c9e7 [POWERPC] PowerPC 440EPx: Sequoia defconfig
AMCC PPC440EPx Sequoia default config.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:48:49 -05:00
Valentine Barshak
d60ff95365 [POWERPC] PowerPC 440EPx: Sequoia device tree
AMCC PPC440EPx Sequoia device tree.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:48:17 -05:00
Masakazu Mokuno
fc43dca9e7 [POWERPC] PS3: Fix bug where the major version part is not compared
Fix the bug that the major version part of the firmware version number
is ignored in the comparison done by ps3_compare_firmware_version
because the difference of two 64-bit quantities is returned as an int.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 20:49:41 +10:00
Paul Mackerras
13a6976afd [POWERPC] Update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 16:51:51 +10:00
Andre Detsch
ada83daab3 [POWERPC] spufs: Don't call spu_run_init from spu_reacquire_runnable
This fixes a major bug which was happening when a SPU thread advances
its execution right after being restored to a SPU.  A potentially
outdated NPC value was being (re)written to the SPU.

So, spu_run_init, in this case, was either not doing anything relevant,
or breaking the execution of the SPU thread.

This fixes a common problem of losing a mailbox write when it was done
to a saved context.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 16:27:18 +10:00
Arnd Bergmann
62ee68e3bc [POWERPC] spufs: Fix update of mailbox status register during backed wbox write
When a process writes into the inbound spu mailbox (wbox) while the
context is saved, we accidentally break the contents of the mb_stat_R
register by clearing other entries of the mailbox status register. This
can cause the user side to hang.

This change fixes the problem by only altering the appropriate bits
of the mailbox status register during a backing-store write.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 16:27:18 +10:00
Christian Krafft
aac2e68481 [POWERPC] spu_manage: fix spu_unit_number for celleb device tree
This fixes a regression introduced with 2.6.23-rc4 after on some
confusion about the device tree interfaces.

IBM QS21 device trees provide "physical-id", so we changed the code to
run on that and remain compatible with all IBM machines.

However, the Toshiba Celleb device tree provides the "unit-id" property,
which was in the Linux code, but never used in this way on IBM hardware.

Legacy device tree used the reg property for the physical id of an spe.
This patch fixes find_spu_unit_number to look for the spu id in that order.
The length is checked to avoid misinterpretation in case the attributes
unit-id or reg do not contain the id.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
2007-08-30 01:35:05 +02:00
Kumar Gala
5cc44e086d [POWERPC] Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-29 16:47:38 -05:00
Kumar Gala
0ee6c15e7b [POWERPC] Flush registers to proper task context
When we flush register state for FP, Altivec, or SPE in flush_*_to_thread
we need to respect the task_struct that the caller has passed to us.

Most cases we are called with current, however sometimes (ptrace) we may
be passed a different task_struct.

This showed up when using gdbserver debugging a simple program that used
floating point. When gdb tried to show the FP regs they all showed up as
0, because the child's FP registers were never properly flushed to memory.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-28 21:15:53 -05:00
Paul Mackerras
35438c4327 Merge branch 'linux-2.6' into for-2.6.24 2007-08-28 15:56:11 +10:00
Paul Mackerras
175587cca7 [POWERPC] Fix SLB initialization at boot time
This partially reverts edd0622bd2.

It turns out that the part of that commit that aimed to ensure that we
created an SLB entry for the kernel stack on secondary CPUs when
starting the CPU didn't achieve its aim, and in fact caused a
regression, because get_paca()->kstack is not initialized at the point
where slb_initialize is called.

This therefore just reverts that part of that commit, while keeping
the change to slb_flush_and_rebolt, which is correct and necessary.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:43 +10:00
Arnd Bergmann
b22ddc703c [POWERPC] cell: Update cell_defconfig for 2.6.23
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:27 +10:00
Maxim Shchetynin
b0e81ebb10 [POWERPC] axonram: Do not delete gendisks queue in error path
On exit do not delete gendisk's queue because this is already done by
del_gendisk(). Doing it twice may cause memory damage.

Signed-off-by: Maximilian <maxim@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:27 +10:00
Maxim Shchetynin
fedcd2c53d [POWERPC] axonram: Module modification for latest firmware API changes
Firmware would not deliver two interrupt numbers in device-tree any more
but only one, for correctable ECC, because uncorrectable ECC from now
is handled by firmware itself.
Changes in the axonram module are necessary because in the old version, if
it is not allowed to fetch the second interrupt number from device-tree,
it interpretes this as an error case and exits.

Signed-off-by: Maximilian <maxim@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:27 +10:00
Arnd Bergmann
3addf55c94 [POWERPC] cell: Support pinhole-reset on IBM cell blades
The Cell Broadband Engine has a method of injecting a
system-reset-exception from an external source into the
operating system, which should trigger the regular behaviour
of entering xmon or kdump.

Unfortunately, the exception handler cannot distinguish it from
other interrupt causes by the SRR1 register, which gets used
for this on Power 6 and others.

IBM Blade servers that want to support triggering the
system reset exception using a pinhole button in the front
panel therefore use an extra register to determine the
reset cause.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

--
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:26 +10:00
Christian Krafft
fa7f374bbf [POWERPC] spu_manage: Use newer physical-id attribute
Legacy device tree used the reg property for the physical id of an
spe.  On newer device tree layouts the reg property contains the
"correct" value in the reg attribute.  So there has been intoduced the
"physical-id" on newer devicetree layouts.  The id is stored by
spu_manage into the spu struct as spe_id.  cbe_thermal has been
changed to use the spu->spe_id.  There's no need for the thermal code
to check devicetree attributes for itself.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:26 +10:00
Olof Johansson
dfa70f81a0 [POWERPC] pasemi: Another IOMMU bugfix for 64K PAGE_SIZE
More fallout from the switch from PAGE_SIZE based IOMMU to the native page
size for the driver. By pure luck it happened to work most of the time, since
we end up invalidating the wrong entries in the TLB.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:26 +10:00
Kumar Gala
2f6c9d9610 [POWERPC] Stop include asm-ppc when building ARCH=powerpc for ppc32
We no longer have any dependancies on include/asm-ppc so we can get ride
of the makefile hacks to include it in the build process.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:47:33 -05:00
Kumar Gala
33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00
Kumar Gala
ed16c20da6 [POWERPC] Remove old includes from arch/ppc
Remove includes of files that existed in arch/ppc that we dont need in
arch/powerpc anymore.  The following includes were removed:

 <asm/amigappc.h>
 <asm/bootinfo.h>
 <asm/ppcboot.h>
 <asm/ppc_sys.h>
 <asm/residual.h>
 <asm/m8260_pci.h>

This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be
needed and thus removed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:39:35 -05:00
Stephen Rothwell
5b072ba453 [POWERPC] Exception numbers are not relevant to iSeries
so remove them from the macros.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:36 +10:00
Stephen Rothwell
7180e3e636 [POWERPC] Split out iSeries specific exception macros
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
dc8f571a26 [POWERPC] Move the iSeries exception vectors
out of head_64.S and into platforms/iseries/exception.S

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
f9ff0f3048 [POWERPC] Move the exception macros into a header file
It makes head_64.S a bit more readable and will allow us to move the
iSeries exceptions elsewhere.

This also removes the last line of the comment:

 * The following macros define the code that appears as
 * the prologue to each of the exception handlers.  They
 * are split into two parts to allow a single kernel binary
 * to be used for pSeries and iSeries.
 * LOL.  One day... - paulus

Anything is possible. :-)

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
fc68e8699f [POWERPC] Move iSeries startup code out of head_64.S
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:34 +10:00
Olof Johansson
dc559f7cd5 [POWERPC] Rework SMP timebase handoff for pasemi
Rework timebase handoff to play nice with configurations with more than
2 cores, as well as with CPU hotplug.

Previous scheme just pushed out the current timebase from the giving
core to all cores without caring if they wanted it or not, nor checking
if they'd taken it. The taking side didn't make sure the giving side
had provided a value yet either. In other words, it was completely broken.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:37:11 +10:00
Scott Wood
e5d8d54db2 [POWERPC] bootwrapper: Add PowerQUICC II (82xx with CPM) cuboot support
This allows booting on legacy, non-device-tree aware versions of U-boot.

It also fixes up the hardware to match the PCI and chipselect information
in the device tree, as u-boot is inconsistent in setting these up
correctly (or at all).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:37:09 +10:00
Scott Wood
0b195812df [POWERPC] bootwrapper: Add 8xx cuboot support
This allows booting on legacy, non-device-tree aware versions of U-boot.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:28:59 +10:00
Scott Wood
2f1d489932 [POWERPC] bootwrapper: Move linker symbols into ops.h
Most of these were previously used by numerous C files and
redeclared in each one.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:27:28 +10:00
Scott Wood
d0f53fafc0 [POWERPC] bootwrapper: Add CPM serial driver
This serial port is used on all 8xx, many 82xx, and some 85xx chips.

The driver requires that the port has already been set up by the firmware
and/or platform code.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:26:20 +10:00
Scott Wood
3ee9b7abaf [POWERPC] bootwrapper: Declare udelay() in ops.h
Declarations in various users are removed.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:49 +10:00
Scott Wood
dc4f397d6e [POWERPC] bootwrapper: serial_console_init() fixes
1. Search the entire compatible list for serial devices.

The serial code previously did a simple strcmp on the compatible
node; this fails when the match string is not the first compatible
listed.  Use dt_is_compatible() instead.

2. Don't call serial_edit_cmdline if getc isn't defined.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:48 +10:00
Scott Wood
61d3b949b7 [POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h
U-boots more recent than when ppcboot.h was forked allow the board config
file to enable additional ethernet ports explicitly, rather than
using a hardcoded list of targets.  This allows bootwrapper platform
files to do the same.

Fortunately, nothing after the ethernet addresses is of interest to
cuboot platforms, so the inevitable mismatches won't be too catastrophic.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:48 +10:00
Scott Wood
6e913c67b3 [POWERPC] bootwrapper: Add 16-bit I/O, sync(), eieio(), and barrier()
Also, include types.h from io.h, so callers don't have to.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:48 +10:00
Scott Wood
a73ac50c47 [POWERPC] bootwrapper: Add dt_is_compatible()
This can be used rather than doing a simple strcmp, which will fail to
handle multiple compatible entries.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:48 +10:00
Scott Wood
0602801c22 [POWERPC] bootwrapper: dt_xlate_range() bugfixes
1. The check whether ranges fits in the buffer was using elements rather
than bytes.
2. Empty ranges were not properly treated as transparent, and missing
ranges were treated as transparent.
3. The loop terminated when translating from the root rather than to.  Once
bug #2 was fixed, it failed due to a missing ranges in the root node.
4. In decoding the ranges property, the #size-cells used was that of
the parent, not the child.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:48 +10:00
Scott Wood
643d3c139b [POWERPC] bootwrapper: Set timebase_period_ns from dt_fixup_cpu_clocks
This lets udelay() work properly on platforms which use dt_fixup_cpu_clocks.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Scott Wood
44d06ba729 [POWERPC] bootwrapper: Update .gitignore
All cuImage types are ignored, as well as preprocessed .lds files,
and the forthcoming zImage.bin files and embedded planet board images.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Scott Wood
4b218e9bb2 [POWERPC] Whitespace cleanup in arch/powerpc
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Stephen Rothwell
16a15a30f8 [POWERPC] iSeries: Clean up lparmap mess
We need to have xLparMap in head_64.S so that it is at a fixed address
(because the linker will not resolve (address & 0xffffffff) for us).
But the assembler miscalculates the KERNEL_VSID() expressions.  So put
the confusing expressions into asm-offsets.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:46 +10:00
Olaf Hering
556ecf9be6 [POWERPC] Advertise correct IDE mode on Pegasos2
The built-in IDE controller is configured in legacy mode, but the PCI
registers advertise native mode.  Force the PCI class into legacy
mode. This allows pata_via to access two drives.

The Pegasos specific irq enforcement in the via82cxxx driver must stay
because there is apparently no generic way to setup irq per channel.

Tested on Pegasos2 with firmware version 20040810, and two IDE disks.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:46 +10:00
Kumar Gala
15f6ddc7d9 [POWERPC] Fix PCI Device ID for MPC8544/8533 processors
The initial user manuals for MPC8544/8533 had some issues with properly
documenting the device IDs for MPC8544/8533.  These processors are almost
identical and both show up on the reference boards.

Fix up the quirks for PCIe support to handle MPC8533/E.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-21 19:15:31 -05:00
Linus Torvalds
2046219364 Merge branch 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc
* 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  [POWERPC] Fix 8xx compile failure
  [POWERPC] Fix FSL BookE machine check reporting
  [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards
  [POWERPC] Add interrupt resource for RTC CMOS driver
2007-08-20 22:43:18 -07:00
Josh Boyer
2ba4573cda [POWERPC] Bamboo zImage wrapper
Add a bootwrapper for the AMCC 440EP Bamboo Eval board.  This also adds a
common fixup_clock function for all 440EP(x) chips.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:30:32 -05:00
Josh Boyer
8c1449bdb4 [POWERPC] Bamboo board support
Add support for the AMCC Bamboo board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:30:14 -05:00
Josh Boyer
142b58ee56 [POWERPC] Bamboo DTS
AMCC Bamboo board DTS

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-20 07:29:55 -05:00
Josh Boyer
1daa194a87 [POWERPC] Fix 40x build
Remove inclusion of __res on 40x.  We don't need it in arch/powerpc

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:29:36 -05:00
Josh Boyer
aab69292e4 [POWERPC] 40x decrementer fixes
Allow generic_calibrate_decr to work for 40x platforms.  Given that the hardware
behavior is identical, this also changes the set_dec function to reload the PIT
on 40x to match the behavior 44x currently has.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-20 07:29:11 -05:00
Josh Boyer
4d922c8dc3 [POWERPC] 40x MMU
Add MMU definitions for 40x platforms.  Also fixes two warnings in 40x_mmu.c.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:28:48 -05:00
Josh Boyer
e90f3b74d8 [POWERPC] 4xx bootwrapper reworks
Make the fixup_memsize function common for all of 4xx as several chips share
the same SDRAM controller.  Also add functions to reset 40x chips and quiesce
the ethernet.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-20 07:28:30 -05:00
Josh Boyer
869680c16f [POWERPC] Rename 44x bootwrapper
Rename the 44x.c wrapper file to 4xx.c.  This will allow us to add common
functions in a single file that can be shared across all of 4xx.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:28:05 -05:00
Josh Boyer
3cc248ae6e [POWERPC] 4xx Kconfig cleanup
Remove some leftover cruft in the 40x Kconfig file.  Also make sure we
select WANT_DEVICE_TREE for 40x.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:27:42 -05:00
Josh Boyer
15f6527e8e [POWERPC] Rename 4xx paths to 40x
4xx is a bit of a misnomer for certain things, as they really apply to PowerPC
40x only.  Rename some of the files to clean this up.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:27:07 -05:00
Kumar Gala
0af666fa6c [POWERPC] Fix 8xx compile failure
CC      arch/powerpc/sysdev/commproc.o
arch/powerpc/sysdev/fsl_soc.c: In function fsl_pcmcia_of_init:
arch/powerpc/sysdev/fsl_soc.c:1109: error: implicit declaration of function of_platform_device_create

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:33 -05:00
Becky Bruce
86d7a9a9c4 [POWERPC] Fix FSL BookE machine check reporting
Reserved MCSR bits on FSL BookE parts may have spurious values
when mcheck occurs.  Mask these off when printing the MCSR to
avoid confusion.  Also, get rid of the MCSR_GL_CI bit defined
for e500 - this bit doesn't actually have any meaning.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:28 -05:00
Kumar Gala
b66510cb99 [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards
The interrupt routing in the device trees for the ULI M1575 was
inproperly using the interrupt line field as pci function.  Fixed
up the device tree's to actual conform for to specification and
changed the interrupt mapping code so it just uses a static mapping
setup as follows:

PIRQA - IRQ9
PIRQB - IRQ10
PIRQC - IRQ11
PIRQD - IRQ12
USB 1.1 OCHI (1c.0) - IRQ12
USB 1.1 OCHI (1c.1) - IRQ9
USB 1.1 OCHI (1c.2) - IRQ10
USB 1.1 ECHI (1c.3) - IRQ11
LAN (1b.0) - IRQ6
AC97 (1d.0) - IRQ6
Modem (1d.1) - IRQ6
HD Audio (1d.2) - IRQ6
SATA (1f.1) - IRQ5
SMB (1e.1) - IRQ7
PMU (1e.2) - IRQ7
PATA (1f.0) - IRQ14/15

Took the oppurtunity to refactor the code into a single file so we
don't have to duplicate these fixes on the two current boards in the
tree and several forth coming boards that will also need the code.

Fixed RTC support that requires a dummy memory read on the P2P bridge
to unlock the RTC and setup the default of the RTC alarm registers to
match with a basic x86 style CMOS RTC.

Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure
the PCI IO space has been setup properly before we start poking ISA
registers at random locations.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:16 -05:00
Kumar Gala
ada3ea6fcd [POWERPC] Add interrupt resource for RTC CMOS driver
The RTC CMOS driver expects the interrupt to be a resource of the platform
device.  Use a fixed interrupt value of 8 since on PPC if we are using this
its off an i8259 which we ensure has interrupt numbers 0..15.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:18:58 -05:00
Stephen Rothwell
a65517f857 [POWERPC] Remove some duplicate declarations from pmac.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
Guennadi Liakhovetski
e78bb5dc2e [POWERPC] Fix i2c device string format
Use strlcpy() to guarantee strings in i2c device type and driver_name
fields are 0-terminated.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
Stephen Rothwell
750d1d1ca1 [POWERPC] Fix section mismatch in pasemi/iommu.c
These functions are only called by __init functions.

WARNING: vmlinux.o(.text+0x56aa0): Section mismatch: reference to .init.text:.lmb_alloc (between '.iob_init' and '.iommu_init_early_pasemi')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
Stephen Rothwell
124d795d16 [POWERPC] Fix section mismatches in udbg_adb.c
The functions are only called from __init functions.

WARNING: vmlinux.o(.text+0x45ed0): Section mismatch: reference to .init.text:.btext_find_display (between '.udbg_adb_init_early' and '.udbg_adb_init')
WARNING: vmlinux.o(.text+0x45f9c): Section mismatch: reference to .init.text:.btext_find_display (between '.udbg_adb_init' and '.udbg_adb_getc_poll')
WARNING: vmlinux.o(.text+0x46000): Section mismatch: reference to .init.text:.find_via_pmu (between '.udbg_adb_init' and '.udbg_adb_getc_poll')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
Stephen Rothwell
109b60f0bc [POWERPC] Fix section mismatch in dart_iommu.c
These functions are only called from __init functions.

WARNING: vmlinux.o(.text+0x398f4): Section mismatch: reference to .init.text:.lmb_alloc (between '.iommu_init_early_dart' and '.pci_dma_bus_setup_dart')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
Stephen Rothwell
d56c3aaa9f [POWERPC] Fix section mismatch in crash_dump.c
WARNING: vmlinux.o(.text+0x23258): Section mismatch: reference to .init.text:.lmb_reserve (between '.reserve_kdump_trampoline' and '.restore_processor_state')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
David Gibson
553fdff633 [POWERPC] Improve robustness of the UIC cascade handler
At present the cascade interrupt handler for the UIC (interrupt
controller on 4xx embedded chips) will misbehave badly if it is called
spuriously - that is if the handler is invoked when no interrupts are
asserted in the child UIC.

Although spurious interrupts shouldn't happen, it's good to behave
robustly if they do.  This patch does so by checking for and ignoring
spurious interrupts.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00
David Gibson
868afce21f [POWERPC] Fix irq flow handler for 4xx UIC
At present the driver for the UIC (the embedded interrupt controller
in 4xx chips) uses the handle_level_irq() flow handler.  It turns out
this does not correctly handle level triggered interrupts on the UIC.

Specifically, acknowledging an irq on the UIC (i.e. clearing the
relevant bit in UIC_SR) will have no effect for a level interrupt
which is still asserted by the external device, even if the irq is
already masked.  Therefore, unlike handle_level_irq() we must ack the
interrupt after invoking the ISR (which should cause the device to
stop asserting the irq) instead of acking it when we mask it, before
the ISR.

This patch implements this change, in a new handle_uic_irq(), a
customised irq flow handler for the UIC.  For edge triggered
interrupts, handle_uic_irq() still uses the old flow - we must ack
edge triggered interrupt before the ISR not after, or we could miss a
second event which occurred between invoking the ISR and acking the
irq.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:05 +10:00
David Gibson
4dc7b4b040 [POWERPC] Fix setting of irq trigger type in UIC driver
The UIC (interrupt controller in 4xx embedded CPUs) driver currently
missets the IRQ_lEVEL flag in desc->status, due to a thinko.  This
patch fixes the bug.

Currently this is only a cosmetic problem (affects the output in
/proc/interrupts), however subsequent patches will use the IRQ_LEVEL
flag to affect flow handling.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:05 +10:00
Stephen Rothwell
e8ff0646e5 [POWERPC] Tidy up CONFIG_PPC_MM_SLICES code
This removes some of the #ifdefs from .c files.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:59 +10:00
Stephen Rothwell
9dfe5c53d0 [POWERPC] Fix non HUGETLB_PAGE build warning
arch/powerpc/mm/mmu_context_64.c: In function 'init_new_context':
arch/powerpc/mm/mmu_context_64.c:31: warning: unused variable 'new_context'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Paul Mackerras
c6d4267ece [POWERPC] Handle alignment faults on new FP load/store instructions
This adds code to handle alignment traps generated by the following
new floating-point load/store instructions, by emulating the
instruction in the kernel (as is done for other instructions that
generate alignment traps):

lfiwax	load floating-point as integer word algebraic indexed
stfiwx	store floating-point as integer word indexed
lfdp	load floating-point double pair
lfdpx	load floating-point double pair indexed
stfdp	store floating-point double pair
stfdpx	store floating-point double pair indexed

All these except stfiwx are new in POWER6.

lfdp/lfdpx/stfdp/stfdpx load and store 16 bytes of memory into an
even/odd FP register pair.  In little-endian mode each 8-byte value is
byte-reversed separately (i.e. not as a 16-byte unit).  lfiwax/stfiwx
load or store the lower 4 bytes of a floating-point register from/to
memory; lfiwax sets the upper 4 bytes of the FP register to the sign
extension of the value loaded.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:55 +10:00
Linas Vepstas
09a54101e1 [POWERPC] pseries: Remove dead EEH video code
Remove dead code, and a misleading comment about EEH checking
for video devices.  The removed code is a left-over from the
olden days where there was concern over how video devices
worked in Linux. We are never going to go that way again,
so kill this.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c |   17 -----------------
 1 file changed, 17 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
0f7f2fb85a [POWERPC] Remove gratuitous reads from powermac pci config space methods
The powermac pci configuration space write methods read the written
location immediately after the write is performed, presumably in order
to flush the write.  However, configuration space writes are not
allowed to be posted, making these reads gratuitous.  Furthermore,
this behavior potentially causes us to violate the PCI PM spec when
changing between e.g. D0 and D3 states, because a delay of up to 10ms
may be required before the OS accesses configuration space after the
write which initiates the transition.

Remove the unnecessary reads from macrisc_write_config,
u3_ht_write_config, and u4_pcie_write_config.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
b139f1fb0f [POWERPC] Remove gratuitous reads from pasemi pci config space methods
The pasemi pci configuration space write method reads the written
location immediately after the write is performed, presumably in order
to flush the write.  However, configuration space writes are not
allowed to be posted, making these reads gratuitous.  Furthermore,
this behavior potentially causes us to violate the PCI PM spec when
changing between e.g. D0 and D3 states, because a delay of up to 10ms
may be required before the OS accesses configuration space after the
write which initiates the transition.

Remove the unnecessary reads from pa_pxp_write_config.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
8935fa0fe6 [POWERPC] tsi108_direct_pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
c78d453b6f [POWERPC] indirect_pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
f1d645f428 [POWERPC] chrp pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
21d8f6c728 [POWERPC] efika rtas_pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:54 +10:00
Nathan Lynch
6127d1c0b0 [POWERPC] null_pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
3fac10e7f5 [POWERPC] powermac pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
1bb8c6216f [POWERPC] pa_pxp_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
2e67d40762 [POWERPC] maple pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
3e02aebbca [POWERPC] celleb_epci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
aec249bc19 [POWERPC] celleb_fake_pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
8674e0c9e5 [POWERPC] rtas_pci_ops: Use named structure member initializers
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Nathan Lynch
1bdb2867e5 [POWERPC] Remove gratuitous reads from maple PCI config space methods
The maple PCI configuration space write methods read the written
location immediately after the write is performed, presumably in order
to flush the write.  However, configuration space writes are not
allowed to be posted, making these reads gratuitous.  Furthermore,
this behavior potentially causes us to violate the PCI PM spec when
changing between e.g. D0 and D3 states, because a delay of up to 10ms
may be required before the OS accesses configuration space after the
write which initiates the transition.  It definitely causes a system
hang for me with a Broadcom 5721 PCIE network adapter, which is fixed
by this change.

Therefore this removes the gratuitous reads from u3_agp_write_config,
u3_ht_write_config, and u4_pcie_write_config.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:53 +10:00
Murali Iyer
96b952dd4b [POWERPC] Export DCR symbols for modules
In order to compile drivers as modules that uses some of the
DCR functions, we need to export the symbols.  Example, EMAC
driver and other drivers that are under development use these
functions.

Signed-off-by: Murali Iyer <mniyer@us.ibm.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Linas Vepstas
0f2342c85d [POWERPC] pseries: Eliminate global error_log_cnt variable
Eliminate the use of error_log_cnt as a global var shared across
different directories.  Pass it as a parameter instead.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----

Respin of earlier patch, with the CONFIG_PSERIES junk removed from the
header file.

 arch/powerpc/kernel/nvram_64.c         |   10 +++++-----
 arch/powerpc/platforms/pseries/rtasd.c |    7 ++++---
 include/asm-powerpc/nvram.h            |    6 ++++--
 3 files changed, 13 insertions(+), 10 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Linas Vepstas
79c0108d1b [POWERPC] pseries: Fix jumbled no_logging flag
Get rid of the jumbled usage of the no_logging flag. Its use
spans several directories, and is incorrectly/misleadingly
documented. Instead, two changes:
1) nvram will accept error log as soon as its ready.
2) logging to nvram stops on the first fatal error reported.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/kernel/nvram_64.c         |    8 --------
 arch/powerpc/platforms/pseries/rtasd.c |   14 ++++++--------
 2 files changed, 6 insertions(+), 16 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Linas Vepstas
72755f4407 [POWERPC] Remove nvram forward declarations
Forward declarations serve no purpose in this file.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----

 arch/powerpc/kernel/nvram_64.c |    5 -----
 1 file changed, 5 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Linas Vepstas
4511dad42a [POWERPC] pseries: Simplify rtasd initialization
Simplify rtasd initialization code; this also fixes a buglet,
where the /proc entries weren't being cleaned up in case of
failure.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/rtasd.c |   53 +++++++++++----------------------
 1 file changed, 19 insertions(+), 34 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Linas Vepstas
ba28cc0931 [POWERPC] pseries: Use rtas_token instead of hand-rolled code
The rtas_token() call does the same thing as this hand-rolled code.
This makes the code easier to read.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/rtasd.c |   13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Linas Vepstas
a4fc3a3cea [POWERPC] pseries: Avoid excess rtas_token calls
We don't need to look up the rtas event token once per
cpu per second.  This avoids some misc device-tree lookups
and string ops and so provides some minor performance
improvement.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
Revised commit-log message.

 arch/powerpc/platforms/pseries/rtasd.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Gabriel C
33567a023e [POWERPC] Typo fixes interrrupt -> interrupt
This fixes some interrrupt -> interrupt typos.

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
David Gibson
0d279d4761 [POWERPC] Fixes to allow use of Ebony's flash chips through physmap_of
This patch contains a handful of small fixes to allow the Ebony's
flash to be exposed as MTD devices via the physmap_of driver.
Specifically it:
	- Makes a small addition to the device tree and zImage wrapper
to record the correct address for the flash in the device tree based
on the board switches as reported via an FPGA register.
	- Prohibits building the old hard-coded "Ebony" flash map on
arch/powerpc kernels, in favour of using physmap_of's device tree
based approach.
	- Enables MTD and physmap_of in the Ebony defconfig.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Jesper Juhl
9420dc65ff [POWERPC] Clean out a bunch of duplicate includes
This removes several duplicate includes from arch/powerpc/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Jon Loeliger
2a4a9fbf26 [POWERPC] embedded6xx: Remove unnecessary loops_per_jiffy initialization code
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Jon Loeliger
c3ca32fdb8 [POWERPC] 8xx: Remove unnecessary loops_per_jiffy initialization code
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Jon Loeliger
7888fbf7bb [POWERPC] 52xx: Remove unnecessary loops_per_jiffy initialization code
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Linas Vepstas
0b9369f493 [POWERPC] EEH: Dump PCI bridge status on event
Gather bridge-specific data on EEH events.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
----
 arch/powerpc/platforms/pseries/eeh.c |   27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Linas Vepstas
093eda3ce5 [POWERPC] EEH: Fix PCI bridge handling bug
The EEH code needs to ignore PCI bridges; sort-of.  It was ignoring
them in the wrong place, and thus failing to set up the
PCI_DN(dn)->pcidev pointer.  Imprudent dereferencing of this pointer
would lead to a crash on cards with bridges.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh_cache.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Linas Vepstas
12588da7cb [POWERPC] EEH: Tweak printk message
Print return code to print message.  Also fix whitespace.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Ishizaki Kou
a4ebd01747 [POWERPC] Init markings for celleb
There are some variables and functions that we should place in init
section.  And this patch changes some '__devinit' to '__init', because
the device is platform device and not hot-pluggable.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Ishizaki Kou
b090b3388b [POWERPC] Fix celleb sio section warning
Fix following warning:
WARNING: vmlinux.o(.text+0x45fd4): Section mismatch: reference to .init.text:.early_serial_txx9_setup (between '.txx9_serial_init' and '.txx9_serial_config')

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Ishizaki Kou
e5b9187b16 [POWERPC] Fix celleb pci section warnings
Fix following warnings:
WARNING: vmlinux.o(.text+0x44ad0): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x44dd8): Section mismatch: reference to .init.text:.free_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:50 +10:00
Ilpo Järvinen
2b02d13996 [POWERPC] Fix invalid semicolon after if statement
A similar fix to netfilter from Eric Dumazet inspired me to
look around a bit by using some grep/sed stuff as looking for
this kind of bugs seemed easy to automate.  This is one of them
I found where it looks like this semicolon is not valid.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 10:48:52 +10:00
Geert Uytterhoeven
2de69124e8 [POWERPC] ps3: Fix no storage devices found
Fix probing of PS3 storage devices: in the success case, we should set
`error' to zero, not `result'.

Without this patch no storage devices are found.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
Roland McGrath
55a910a81d [POWERPC] Fix for assembler -g
ppc64 does the unusual thing of using #include on a compiler-generated
assembly file (lparmap.s) from an assembly source file (head_64.S).
This runs afoul of my recent patch to pass -gdwarf2 to the assembler
under CONFIG_DEBUG_INFO.  This patch avoids the problem by disabling
DWARF generation (-g0) when producing lparmap.s.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
David Gibson
aa1cf632bd [POWERPC] Fix small race in 44x tlbie function
The 440 family of processors don't have a tlbie instruction.  So, we
implement TLB invalidates by explicitly searching the TLB with tlbsx.,
then clobbering the relevant entry, if any.  Unfortunately the PID for
the search needs to be stored in the MMUCR register, which is also
used by the TLB miss handler.  Interrupts were enabled in _tlbie(), so
an interrupt between loading the MMUCR and the tlbsx could cause
incorrect search results, and thus a failure to invalide TLB entries
which needed to be invalidated.

This fixes the problem in both arch/ppc and arch/powerpc by inhibiting
interrupts (even critical and debug interrupts) across the relevant
instructions.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
Becky Bruce
fa6b769a8e [POWERPC] Remove unused code causing a compile warning
AFAICT, nobody is using ft_ordered(), and it causes a build warning
to be generated.  This patch cleans that up by removing the function
and the commented-out code that calls it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
Jeremy Kerr
ad941fe4b6 [POWERPC] cell: Fix errno for modular spufs_create with invalid neighbour
At present, spu_create with an invalid neighbo(u)r will return -ENOSYS,
not -EBADF, but only when spufs.o is built as a module.

This change adds the appropriate errno, making the behaviour the same
as the built-in case.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:44 +10:00
Benjamin Herrenschmidt
d1f5a77f2c [POWERPC] Fix size check for hugetlbfs
My "slices" address space management code that was added in the 2.6.22
implementation of get_unmapped_area() doesn't properly check that the
size is a multiple of the requested page size.  This allows userland to
create VMAs that aren't a multiple of the huge page size with hugetlbfs
(since hugetlbfs entirely relies on get_unmapped_area() to do that
checking) which leads to a kernel BUG() when such areas are torn down.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:42 +10:00
Benjamin Herrenschmidt
8f2ea1fd3f [POWERPC] Fix initialization and usage of dma_mask
powerpc has a couple of bugs in the usage of dma_masks that tend to
break when drivers explicitly try to set a 32-bit mask for example.

First, the code that generates the pci devices from the OF device-tree
doesn't initialize the mask properly, then our implementation of
set_dma_mask() was trying to validate the -previous- mask value, not the
one passed in as an argument.

This fixes these problems.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:42 +10:00
Stephen Rothwell
939e60f680 [POWERPC] Fix more section mismatches in head_64.S
WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start')
WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common')
WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common')
WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:41 +10:00
Kim Phillips
3c5ede8cc6 [POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC"
This reverts commit 3baee95595.

That commit was a mistake from the start; I added mdio type to the
bus scan list early on in my ucc_geth migrate to phylib development,
which is just pure wrong (the ucc_geth_mii driver creates the mii
bus and the PHY layer handles PHY enumeration without translation).

This follows on from commit 77926826f3:

 Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"

which was basically trying to hide a symptom of the original mistake
this revert fixes.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
geoffrey.levand@am.sony.com
bd948b0377 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
Geoff Levand
332a7b3e93 [POWERPC] PS3: Remove text saying PS3 support is incomplete
Remove the Kconfig message that indicates the PS3 platform support is
incomplete.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
Geert Uytterhoeven
edd2a9d185 [POWERPC] PS3: Fix storage probe logic
Fix the PS3 storage probe logic to properly find device regions on cold
startup.

 o Change the storage probe event mask from notify_device_ready
   to notify_region_update.
 o Improve the storage probe error handling.
 o Change ps3_storage_wait_for_device() to use a temporary variable to hold
   the buffer address.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:21 +10:00
Andre Detsch
f5996449e3 [POWERPC] cell: Move SPU affinity init to spu_management_of_ops
This patch moves affinity initialization code from spu_base.c to a
new spu_management_of_ops function (init_affinity), which is empty
in the case of PS3. This fixes a linking problem that was happening
when compiling for PS3.
Also, some small code style changes were made.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:21 +10:00
Paul Mackerras
edd0622bd2 [POWERPC] Fix potential duplicate entry in SLB shadow buffer
We were getting a duplicate entry in the SLB shadow buffer in
slb_flush_and_rebolt() if the kernel stack was in the same segment
as PAGE_OFFSET, which on POWER6 causes the hypervisor to terminate
the partition with an error.  This fixes it.

Also we were not creating an SLB entry (or an SLB shadow buffer
entry) for the kernel stack on secondary CPUs when starting the
CPU.  This isn't a major problem, since an appropriate entry will
be created on demand, but this fixes that also for consistency.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:07 +10:00
Michael Neuling
67439b76f2 [POWERPC] Fixes for the SLB shadow buffer code
On a machine with hardware 64kB pages and a kernel configured for a
64kB base page size, we need to change the vmalloc segment from 64kB
pages to 4kB pages if some driver creates a non-cacheable mapping in
the vmalloc area.  However, we never updated with SLB shadow buffer.
This fixes it.  Thanks to paulus for finding this.

Also added some write barriers to ensure the shadow buffer contents
are always consistent.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Segher Boessenkool
5628244059 [POWERPC] Fix a compile warning in powermac/feature.c
...by using the pci_get API instead of the deprecated old stuff.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Segher Boessenkool
3a77d291be [POWERPC] Fix a compile warning in pci_32.c
__must_check, so do so.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Michael Ellerman
b9c3fdb0f0 [POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
Some new machines use the "ibm,dynamic-reconfiguration-memory" property
to provide memory layout information, rather than via memory nodes.

There is a bug in the code to parse this property for start addresses
over 4GB; we store the start address in an unsigned int, which means
we throw away the high bits and add apparently duplicate regions.
This results in a BUG() in free_bootmem_core().  This fixes it by
using an unsigned long instead.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:00 +10:00
Kevin Corry
17aa3a82aa [POWERPC] Fix num_cpus calculation in smp_call_function_map()
In smp_call_function_map(), num_cpus is set to the number of online
CPUs minus one.  However, if the CPU mask does not include all CPUs
(except the one we're running on), the routine will hang in the first
while() loop until the 8 second timeout occurs.

The num_cpus should be set to the number of CPUs specified in the mask
passed into the routine, after we've made any modifications to the
mask.  With this change, we can also get rid of the call to
cpus_empty() and avoid adding another pass through the bitmask.

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:00 +10:00
Stephen Rothwell
cba684f56d [POWERPC] ps3: Fix section mismatch in ps3/setup.c
WARNING: vmlinux.o(.text+0x605d4): Section mismatch: reference to
.init.text:.__alloc_bootmem (between '.prealloc' and '.ps3_power_save')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:00 +10:00
Andre Detsch
683e3ab2b5 [POWERPC] spufs: Fix affinity after introduction of node_allowed() calls
This patch fixes affinity reference point placement, which was not being
done in some situations, after the introduction of node_allowed() calls.

The previously used parameter, 'ctx', is just the iterator of the
previous list_for_each_entry_reverse loop, and its value might be
invalid at the end of the loop. Also, the right context to seek
for information when defining the reference ctx location
_is_ the reference ctx.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:18:10 +10:00
Paul Mackerras
430404ed9c [POWERPC] Fix special PTE code for secondary hash bucket
The code for mapping special 4k pages on kernels using a 64kB base
page size was missing the code for doing the RPN (real page number)
manipulation when inserting the hardware PTE in the secondary hash
bucket.  It needs the same code as has already been added to the
code that inserts the HPTE in the primary hash bucket.  This adds it.

Spotted by Ben Herrenschmidt.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:16:11 +10:00
Linus Torvalds
2f63251ed0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits)
  [WATCHDOG] Fix pcwd_init_module crash
  [WATCHDOG] ICH9 support for iTCO_wdt
  [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges
  [WATCHDOG] 631xESB/632xESB support for iTCO_wdt
  [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY
  [WATCHDOG] Return value of nonseekable_open
  [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation
  [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed
  [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature
  [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting
  [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support
  [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl
  [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value
  [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open
  [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support
  [WATCHDOG] mv64x60_wdt: Get register address from platform data
  [WATCHDOG] mv64x60_wdt: set up platform_device in platform code
  [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt
  [WATCHDOG] s3c2410_wdt: fixup after arch include moves
  [WATCHDOG] git-watchdog-typo
  ...
2007-07-31 20:43:52 -07:00
Stephane Eranian
a583f1b542 remove unused TIF_NOTIFY_RESUME flag
Remove unused TIF_NOTIFY_RESUME flag for all processor architectures.  The
flag was not used excecpt on IA-64 where the patch replaces it with
TIF_PERFMON_WORK.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Alexey Dobriyan
4e950f6f01 Remove fs.h from mm.h
Remove fs.h from mm.h. For this,
 1) Uninline vma_wants_writenotify(). It's pretty huge anyway.
 2) Add back fs.h or less bloated headers (err.h) to files that need it.

As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files
rebuilt down to 3444 (-12.3%).

Cross-compile tested without regressions on my two usual configs and (sigh):

alpha              arm-mx1ads        mips-bigsur          powerpc-ebony
alpha-allnoconfig  arm-neponset      mips-capcella        powerpc-g5
alpha-defconfig    arm-netwinder     mips-cobalt          powerpc-holly
alpha-up           arm-netx          mips-db1000          powerpc-iseries
arm                arm-ns9xxx        mips-db1100          powerpc-linkstation
arm-assabet        arm-omap_h2_1610  mips-db1200          powerpc-lite5200
arm-at91rm9200dk   arm-onearm        mips-db1500          powerpc-maple
arm-at91rm9200ek   arm-picotux200    mips-db1550          powerpc-mpc7448_hpc2
arm-at91sam9260ek  arm-pleb          mips-ddb5477         powerpc-mpc8272_ads
arm-at91sam9261ek  arm-pnx4008       mips-decstation      powerpc-mpc8313_rdb
arm-at91sam9263ek  arm-pxa255-idp    mips-e55             powerpc-mpc832x_mds
arm-at91sam9rlek   arm-realview      mips-emma2rh         powerpc-mpc832x_rdb
arm-ateb9200       arm-realview-smp  mips-excite          powerpc-mpc834x_itx
arm-badge4         arm-rpc           mips-fulong          powerpc-mpc834x_itxgp
arm-carmeva        arm-s3c2410       mips-ip22            powerpc-mpc834x_mds
arm-cerfcube       arm-shannon       mips-ip27            powerpc-mpc836x_mds
arm-clps7500       arm-shark         mips-ip32            powerpc-mpc8540_ads
arm-collie         arm-simpad        mips-jazz            powerpc-mpc8544_ds
arm-corgi          arm-spitz         mips-jmr3927         powerpc-mpc8560_ads
arm-csb337         arm-trizeps4      mips-malta           powerpc-mpc8568mds
arm-csb637         arm-versatile     mips-mipssim         powerpc-mpc85xx_cds
arm-ebsa110        i386              mips-mpc30x          powerpc-mpc8641_hpcn
arm-edb7211        i386-allnoconfig  mips-msp71xx         powerpc-mpc866_ads
arm-em_x270        i386-defconfig    mips-ocelot          powerpc-mpc885_ads
arm-ep93xx         i386-up           mips-pb1100          powerpc-pasemi
arm-footbridge     ia64              mips-pb1500          powerpc-pmac32
arm-fortunet       ia64-allnoconfig  mips-pb1550          powerpc-ppc64
arm-h3600          ia64-bigsur       mips-pnx8550-jbs     powerpc-prpmc2800
arm-h7201          ia64-defconfig    mips-pnx8550-stb810  powerpc-ps3
arm-h7202          ia64-gensparse    mips-qemu            powerpc-pseries
arm-hackkit        ia64-sim          mips-rbhma4200       powerpc-up
arm-integrator     ia64-sn2          mips-rbhma4500       s390
arm-iop13xx        ia64-tiger        mips-rm200           s390-allnoconfig
arm-iop32x         ia64-up           mips-sb1250-swarm    s390-defconfig
arm-iop33x         ia64-zx1          mips-sead            s390-up
arm-ixp2000        m68k              mips-tb0219          sparc
arm-ixp23xx        m68k-amiga        mips-tb0226          sparc-allnoconfig
arm-ixp4xx         m68k-apollo       mips-tb0287          sparc-defconfig
arm-jornada720     m68k-atari        mips-workpad         sparc-up
arm-kafa           m68k-bvme6000     mips-wrppmc          sparc64
arm-kb9202         m68k-hp300        mips-yosemite        sparc64-allnoconfig
arm-ks8695         m68k-mac          parisc               sparc64-defconfig
arm-lart           m68k-mvme147      parisc-allnoconfig   sparc64-up
arm-lpd270         m68k-mvme16x      parisc-defconfig     um-x86_64
arm-lpd7a400       m68k-q40          parisc-up            x86_64
arm-lpd7a404       m68k-sun3         powerpc              x86_64-allnoconfig
arm-lubbock        m68k-sun3x        powerpc-cell         x86_64-defconfig
arm-lusl7200       mips              powerpc-celleb       x86_64-up
arm-mainstone      mips-atlas        powerpc-chrp32

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 17:09:29 -07:00
Rafael J. Wysocki
b0cb1a19d0 Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:45:38 -07:00
Paul Mackerras
46b2835771 Merge branch 'fixes-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2007-07-26 16:43:24 +10:00
Christoph Hellwig
9d78592ed7 [POWERPC] spusched: Fix initial timeslice calculation
Currently we calculate the first timeslice for every context
incorrectly - alloc_spu_context calls spu_set_timeslice before we set
ctx->prio so we always calculate the longest possible timeslice for the
lowest possible priority.

This patch makes sure to update the schedule-related fields before
calculating the timeslice and also makes sure we update the timeslice for
a non-running context when entering spu_run so a priority change affects
the context as soon as possible.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:56 +10:00
Masato Noguchi
6f6a6dc0c8 [POWERPC] spufs: Fix incorrect initialization of cbe_spu_info.spus
We currently initialize cbe_spu_info[].spus in both init_spu_base and
spu_sched_init. The initialise in spu_sched_init clears the SPU list,
so we end up with no physical SPUs. Because of this, the spu_run
syscall will block forever.

This change removes the unnecessary initialization in spu_sched_init.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:55 +10:00
Benjamin Herrenschmidt
17cd87c26b [POWERPC] Fix Maple platform ISA bus
The Maple platform has ISA IOs but didn't call the new functions to
actually map those, thus crashing when trying to access the nvram.

This fixes Maple and JS2x using SLOF.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:49 +10:00
Benjamin Herrenschmidt
50747cb818 [POWERPC] Make pci_iounmap actually unmap things
This patch uses the newly added functions for testing if an address is
an ISA or PCI IO port to properly unmap things in pci_iounmap that
aren't such ports.  Without that, drivers using the iomap API will never
actually unmap resources, which on IBM server machines will prevent
hot-unplug of the corresponding HW adapters.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:48 +10:00
Benjamin Herrenschmidt
6dfbde2091 [POWERPC] Add function to check if address is an IO port
This adds a function that tells you if a given kernel virtual address
is hitting a PCI or ISA IO port permanent mapping or not. This is to
be used in the next patch to fix iomap APIs to properly unmap things.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:47 +10:00
Alan Curry
f5d834fc34 [POWERPC] Fix Pegasos keyboard detection
As of 2.6.22 the kernel doesn't recognize the i8042 keyboard/mouse
controller on the PegasosPPC.  This is because of a feature/bug in the
OF device tree: the "device_type" attribute is an empty string instead
of "8042" as the kernel expects.  This adds a secondary detection
which looks for a device whose *name* is "8042" if there is no device
whose *type* is "8042".

Signed-off-by: Alan Curry <pacman@world.std.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:45 +10:00
Stephen Rothwell
16782a604c [POWERPC] iSeries: Fix section mismatch warning in lpevents
WARNING: vmlinux.o(.text+0x4f568): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.setup_hvlpevent_queue' and '.process_hvlpevents')

setup_hvlpevent_queue is only called from __init code so make it __init
as well.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:18 +10:00
Stephen Rothwell
c40b91b59d [POWERPC] iSeries: Fix section mismatch warnings
WARNING: vmlinux.o(.text+0x8124): Section mismatch: reference to .init.text:.iSeries_early_setup (between '.__start_initialization_iSeries' and '.__mmu_off')
WARNING: vmlinux.o(.text+0x8128): Section mismatch: reference to .init.text:.early_setup (between '.__start_initialization_iSeries' and '.__mmu_off')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Guennadi Liakhovetski
f2d32db344 [POWERPC] Fix RTC and device tree on linkstation machines
This fixes the RTC on linkstation ppc machines again, and updates the
device tree: add rtc nodes on i2c, remove bogus 0-size cache-line
declarations, rename interrupt-controller nodes, remove erroneous
interrupt-parent line, accidentally introduced by a recent patch.

Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Guennadi Liakhovetski
d13ae8620d [POWERPC] Add of_register_i2c_devices()
Scan the device tree for i2c devices, check their "compatible" property
against a hard-coded table, and, if found, register with i2c boardinfo.
This provides the infrastructure needed to find i2c devices in the
device tree and register them with the i2c subsystem.

This and the following commit let the linkstation work with the new i2c
API and thus fix a regression.

Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Manish Ahuja
56d6d1a73d [POWERPC] Fix loop with unsigned long counter variable
This fixes a possible infinite loop when the unsigned long counter "i"
is used in lmb_add_region() in the following for loop:

for (i = rgn->cnt-1; i >= 0; i--)

by making the loop counter "i" be signed.

Signed-off-by: Manish Ahuja <ahuja@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Kumar Gala
141707892e [POWERPC] Fix register labels on show_regs() message for 4xx/Book-E
In a show_regs()  message The DEAR and ESR were reported as
DAR and DSISR which only exist on classic parts.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:46:15 -05:00
Kumar Gala
d1c813123f [POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORM
BootX text code is only supported on systems with real OF at this point
which is PPC_OF && PPC_MULTIPLATFORM.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:43:36 -05:00
Roy Zang
10ce8c69d0 [POWERPC] Fix the ability to reset on MPC8544 DS and MPC8568 MDS boards
Add global-utilities node with has-rstcr on MPC8544 DS and MPC8568 MDS
boards so they are able to reset properly.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:19:57 -05:00
Roy Zang
006af9e229 [POWERPC] Fix mpc7448hpc2 tsi108 device_type bug
Fix mpc7448hpc2 tsi108 device_type bug.
Wrong device type will break the board startup.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:17:02 -05:00
Kumar Gala
282045b450 [POWREPC] Fixup a number of modpost warnings on ppc32
Fixed the following warnings:

WARNING: vmlinux.o(.text+0x2934): Section mismatch: reference to .init.text:__alloc_bootmem (between 'irq_alloc_host' and 'irq_set_default_host')
WARNING: vmlinux.o(.text+0xb2aa): Section mismatch: reference to .init.data:boot_command_line (between 'register_early_udbg_console' and 'udbg_printf')
WARNING: vmlinux.o(.text+0xb2b2): Section mismatch: reference to .init.data:boot_command_line (between 'register_early_udbg_console' and 'udbg_printf')
WARNING: vmlinux.o(.text+0xe354): Section mismatch: reference to .init.text:__alloc_bootmem (between 'pcibios_alloc_controller' and 'pci_domain_nr')
WARNING: vmlinux.o(.text+0x12768): Section mismatch: reference to .init.text:update_bridge_resource (between 'quirk_fsl_pcie_transparent' and 'indirect_read_config')
WARNING: vmlinux.o(.text+0x127a8): Section mismatch: reference to .init.text:update_bridge_resource (between 'quirk_fsl_pcie_transparent' and 'indirect_read_config')
WARNING: vmlinux.o(.text+0x17566c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bus_parented')

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:16:21 -05:00
Kumar Gala
9a9bcf4e00 [POWERPC] Fix ethernet PHY support on MPC8544 DS
The MPC8544 dts needed to set the new phy-connection-type to rgmii-id
for the Vitesse PHY on the board to work properly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:07:36 -05:00
Kumar Gala
2052d6d25d [POWERPC] Don't try to allocate resources for a Freescale POWERPC PHB
The Freescale PCI PHBs actual report back values in the BAR registers
this causes issues in that we try to allocate resources for them
and will get error messages like the following on MPC8544 DS:

PCI: Failed to allocate mem resource #1:80000000@0 for 0000:00:00.0

To address this if we are class PCI_CLASS_PROCESSOR_POWERPC, a normal
header type, and the PHB we clear out all the resources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-25 23:02:06 -05:00
Paul Mackerras
77926826f3 Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"
This reverts commit fd6e9d3945.

Having #size-cells == 0 in a node indicates that things under the
node aren't directly accessible, and therefore we shouldn't try to
translate addresses for devices under the node into CPU physical
addresses.

Some drivers, such as the nvram driver for powermacs, rely on
of_address_to_resource failing if they are called for a node
representing a device whose resources aren't directly accessible
by the CPU.  These drivers were broken by commit fd6e9d39,
resulting in the "Lombard" powerbook hanging early in the boot
process.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 13:44:36 +10:00
Kumar Gala
7659c038d3 [POWERPC] Fix PCI indirect for big-endian cfg_addr
We didn't actually propogate the flag we pass into setup_indirect_pci()
to set indirect_type and thus were getting the wrong endianness if
PPC_INDIRECT_TYPE_BIG_ENDIAN was set.

Also, we need to or in additional flags rather than just doing a
direct assignment.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-25 00:29:53 -05:00
Linus Torvalds
0de085bb47 Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits)
  [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
  [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
  [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
  [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
  [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
  [POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
  [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
  [POWERPC] FSL: Add support for PCI-X controllers
  [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
  [POWERPC] Provide ability to setup P2P bridge registers from struct resource
  [POWERPC] Add basic PCI/PCI Express support for 8544DS board
  [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
  [POWERPC] Removed setup_indirect_pci_nomap
  [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
  [POWERPC] 85xx: Added 8568 PCIe support
  [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
  [POWERPC] Add basic PCI node for mpc8568mds board
  [POWERPC] Use Freescale pci/pcie common code for 85xx boards
  [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
  [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node
  ...
2007-07-24 20:26:25 -07:00
Dale Farnsworth
7e07a15913 [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support
Add support for arch/powerpc, specifically for the prpmc2800 platform.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:02 +00:00
Christoph Hellwig
b2c863bd2d spusched: fix mismerge in spufs.h
spufs.h now has two enums for the sched_flags leading to identical
values for SPU_SCHED_WAS_ACTIVE and SPU_SCHED_NOTIFY_ACTIVE.  Merge
them into a single enum as they were in the IBM development tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24 12:24:58 -07:00
Kumar Gala
e58712111f [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
Added the MPC85xx PCI device IDs that we need for the quirks we have.

Also, fixed the MPC8567E, MPC8567 device IDs which had the wrong value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:32:05 -05:00
Jon Loeliger
c26c372cdb [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
Also add 8641/8641D device IDs as well.
All of which already exist or have been submitted to
The Linux PCI ID Repository at:
    http://pci-ids.ucw.cz/

CC-to: pci-ids@ucw.cz
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:58 -05:00
Randy Vinson
6af0125742 [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
Added the P2P bridge present on the Arcadia base board and moved the VIA
Southbridge behind the bridge to reflect its actual position in the bus
organization. Added the RTC that's in the VIA Southbridge and expanded
the ranges array for the SOC node to allow proper address translation of
the RTC registers.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:55 -05:00
Randy Vinson
8d7bc8f9d1 [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
Setting the host bridge @8000 as primary. Also fixing a bug in
setting the USB interrupt numbers.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:49 -05:00
Randy Vinson
bca03c6bdd [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
The interrupts of an E100 card inserted in PCI slot 4 may be on at bootup.
The resulting interrupt flood interacts with the 8259 cascade handler and
prevents proper boot up. There is a quirk for the E100 that will disable
the E100's interrupts but to use it, the 8259 cascade hookup must be
delayed until after the quirk has run. This patch delays the 8259 cascade
hookup by registering a device_initcall() which runs after the PCI quirk
for the E100.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 10:31:34 -05:00