Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.
Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When multiple events were used in 'perf record', allow the user to
choose which one is wanted before showing the per event histograms.
Annotations will be performed on the chosen event.
Allow going back and forth from event to event quickly using just the
arrow keys and enter.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: William Cohen <wcohen@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.
More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.
But the overall goal/trend is to more uniformly use evsels and evlists.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[root@emilia ~]# perf report --stdio
The perf.data file has no samples!
[root@emilia ~]#
The TUI shows a popup warning message with the same message.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We only allocate it when in TUI mode. In --stdio mode unconditionally
initializing this area leads to memory corruption.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we'll need it when implementing the live annotate TUI browser.
This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf annotate tool continues aggregating everything on just one
histograms, but to support the top model add support for one histogram
perf evsel in the evlist.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They will be used by perf top, so that we have just one set of routines
to do annotation.
Rename "struct sym_priv" to "struct annotation", etc, to clarify this
code a bit.
Rename "struct sym_ext" to "struct source_line", to give it a meaningful
name, that clarifies that it is a the result of an addr2line call, that
is sorted by percentage one particular source code line appeared in the
annotation.
And since we're moving things around also rename 'sym_hist->ip' to
'sym_hist->addr' as we want to do data structure annotation at some
point.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because in tools like 'top' we don't want the pager.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And move the event_t methods to the perf_event__ too.
No code changes, just namespace consistency.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the callchain API naming more consistent.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchains are fed with an array of a fixed size.
As a result we iterate over each callchains three times:
- 1st to resolve symbols
- 2nd to filter out context boundaries
- 3rd for the insertion into the tree
This also involves some pairs of memory allocation/deallocation
everytime we insert a callchain, for the filtered out array of
addresses and for the array of symbols that comes along.
Instead, feed the callchains through a linked list with persistent
allocations. It brings several pros like:
- Merge the 1st and 2nd iterations in one. That was possible before
but in a way that would involve allocating an array slightly taller
than necessary because we don't know in advance the number of context
boundaries to filter out.
- Much lesser allocations/deallocations. The linked list keeps
persistent empty entries for the next usages and is extendable at
will.
- Makes it easier for multiple sources of callchains to feed a
stacktrace together. This is deemed to pave the way for cfi based
callchains wherein traditional frame pointer based kernel
stacktraces will precede cfi based user ones, producing an overall
callchain which size is hardly predictable. This requirement
makes the static array obsolete and makes a linked list based
iterator a much more flexible fit.
Basic testing on a big perf file containing callchains (~ 176 MB)
has shown a throughput gain of about 11% with perf report.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symfs argument allows analysis of perf.data file using a locally accessible
filesystem tree with debug symbols - e.g., tree created during image builds,
sshfs mount, loop mounted KVM disk images, USB keys, initrds, etc. Anything
with an OS tree can be analyzed from anywhere without the need to populate a
local data store with build-ids.
Commiter notes:
o Fixed up symfs="/" variants handling.
o prefixed DSO__ORIG_GUEST_KMODULE case with symfs too, avoiding use of files
outside the symfs directory.
LKML-Reference: <1291926427-28846-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we are running the new perf on an old kernel without support for
sample_id_all, we should fall back to the old unordered processing of
events. If we didn't than we would *always* process events without
timestamps out of order, whether or not we hit a reordering race. In
other words, instead of there being a chance of not attributing samples
correctly, we would guarantee that samples would not be attributed.
While processing all events without timestamps before events with
timestamps may seem like an intuitive solution, it falls down as
PERF_RECORD_EXIT events would also be processed before any samples.
Even with a workaround for that case, samples before/after an exec would
not be attributed correctly.
This patch allows commands to indicate whether they need to fall back to
unordered processing, so that commands that do not care about timestamps
on every event will not be affected. If we do fallback, this will print
out a warning if report -D was invoked.
This patch adds the test in perf_session__new so that we only need to
test once per session. Commands that do not use an event_ops (such as
record and top) can simply pass NULL in it's place.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291951882-sup-6069@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful for analyzing a perf data file on a different system than
the one data was collected on and still include symbols from loaded
kernel modules in the output.
Commiter note: Updated the man page accordingly.
LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do that to start a consistant callchain API namespace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@infradead.org>
Relying just on ~/.perfconfig or rebuilding the tool disabling support
for the TUI is too cumbersome, so allow specifying which UI to use and
make the command line switch override whatever is in ~/.perfconfig.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cmd_record exits the whole perf binary will exit right after,
so no need to traverse lots of complex data structures freeing them.
Sticked a comment for leak detectives and for a experiment with obstacks
to be performed so that we can speed up freeing that memory.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only in verbose mode so as not to bloat struct symbol too much.
The key used is '/', just like in vi, less, etc.
More work is needed to allocate space on the symbol in a more clear way.
This experiment shows how to do it for the hist_browser, in the main
window.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy-up patch to remove some code and struct perf_session data members
which are no longer needed due to the previous patch: "perf tools: Don't
abbreviate file paths relative to the cwd".
LKML-Reference: <new-submission>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hists have their hits increased by the event period. And this
period based counting is the foundation of all the stats in
perf report.
But callchains still use the raw number of hits, without taking
the period into account. So when we compute the percentage,
absolute based percentages are totally broken, and relative ones
too in the first parent level. Because we pass the number of events
muliplied by their period as the total number of hits to the
callchain filtering, while callchains expect this number to be
the number of raw hits.
perf report -g graph was simply not working, showing no graph unless
the min percent was zero. And even there the percentage of the
branches was always 0. And may be fractal filtering was broken on
the first branch level too.
flat also was broken, but it was hidden because of other breakages.
Anyway fix this by counting using periods on callchains.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Simplifying the tools that were using both in sequence and allowing
upcoming simplifications, such as Arun's patch to sort by cpus.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is useful to know on which CPU a sample was captured on.
The information is captured with perf record -R but it was
not printed out by perf report -D. This patch adds this.
When -R is not used, cpu is set to -1to indicate that
the CPU is unknown (it is not captured).
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bff964c.e88cd80a.3106.7d31@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__tty_browse_tree function was created with the loop to print
all events, and its equivalent, hists__tui_browse_tree, was created in a
similar fashion, where it is possible to switch among the multiple
events, if present, using TAB to go the next event, and shift+TAB
(UNTAB) to go to the previous.
The report TUI now shows as the window title the name of the event and a
leak was fixed wrt pstacks.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:
[root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
/root/.perfconfig
[root@doppio linux-2.6-tip]# cat /root/.perfconfig
[tui]
report = off
[root@doppio linux-2.6-tip]#
System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OPT_SET_INT was renamed to OPT_SET_UINT since the only use in these
tools is to set something that has an enum type, that is builtin
compatible with unsigned int.
Several string constifications were done to make OPT_STRING require a
const char * type.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Number of samples is meaningless after we switched to auto-freq, so
report the number of events, i.e. not the sum of the different periods,
but the number PERF_RECORD_SAMPLE emitted by the kernel.
While doing this I noticed that naming "count" to the sum of all the
event periods can be confusing, so rename it to .period, just like in
struct sample.data, so that we become more consistent.
This helps with the next step, that was to record in struct hist_entry
the number of sample events for each instance, we need that because we
use it to generate the number of events when applying filters to the
tree of hist entries like it is being done in the TUI report browser.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The events_stats.total field is too generic, rename it to .total_period,
and also add a comment explaining that it is the sum of all the .period
fields in samples, that is needed because we use auto-freq to avoid
sampling artifacts.
Ditto for events_stats.lost, that is the sum of all lost_event.lost
fields, i.e. the number of events the kernel dropped.
Looking at the users, builtin-sched.c can make use of these fields and
stop doing it again.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is one more thing that started global but are more useful per hist
or per session.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we don't anymore use popen to run 'perf annotate' for the selected
symbol, instead we collect per address samplings when processing samples
in 'perf report' if we're using the newt browser, then we use this data
directly to do annotation.
Done this way we can actually traverse the objdump_line objects
directly, matching the addresses to the collected samples and colouring
them appropriately using lower level slang routines.
The new ui_browser class will be reused for the main, callchain aware,
histogram browser, when it will be made generic and don't assume that
the objects are always instances of the objdump_line class maintained
using list_heads.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are really not specific to the newt code, can be used by other UI
frontends.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Better done when we are adding entries, be it initially of when we're
re-sorting the histograms.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In cbbc79a we introduced support for multiple events by introducing a
new "event_stat_id" struct and then made several perf_session methods
receive a point to it instead of a pointer to perf_session, and kept the
event_stats and hists rb_tree in perf_session.
While working on the new newt based browser, I realised that it would be
better to introduce a new class, "hists" (short for "histograms"),
renaming the "event_stat_id" struct and the perf_session methods that
were really "hists" methods, as they manipulate only struct hists
members, not touching anything in the other perf_session members.
Other optimizations, such as calculating the maximum lenght of a symbol
name present in an hists instance will be possible as we add them,
avoiding a re-traversal just for finding that information.
The rationale for the name "hists" to replace "event_stat_id" is that we
may have multiple sets of hists for the same event_stat id, as, for
instance, the 'perf diff' tool has, so event stat id is not what
characterizes what this struct and the functions that manipulate it do.
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Works by adding a third parameter to the '-g' argument, after the graph
type and minimum percentage, for example:
[root@doppio linux-2.6-tip]# perf report -g fractal,0.5,2
Will show only the first two symbols where at least 0.5% of the samples
took place.
All the other symbols that don't fall outside these constraints will be
put together in the last entry, prefixed with "[...]" and the total
percentage for them.
Suggested-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And with that fix at least one bug:
The first hit for an entry, the one that calls malloc to create a new
instance in __perf_session__add_hist_entry, wasn't adding the count to
the per cpumode (PERF_RECORD_MISC_USER, etc) total variable.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch improves 'perf report -h' output for the
'--call-graph' command line option by enumerating the
different output types.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1273332783-4268-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.
What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit. Doing
that in perf-record itself, however, is off-limits.
This patch introduces perf-inject, which does the same job while
leaving perf-record untouched. Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:
perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -
perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.
Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now those methods don't operate on a global list of dsos, but on lists
of machines, so make this clear by renaming the functions.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct kernel_info and kerninfo__ are too vague, what they really
describe are machines, virtual ones or hosts.
There are more changes to introduce helpers to shorten function calls
and to make more clear what is really being done, but I left that for
subsequent patches.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
