Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.
We can also preallocate blocks past EOF in the same was as with
fallocate. Flag FALLOC_FL_KEEP_SIZE will cause the inode size to remain
the same even if we preallocate blocks past EOF.
It uses the same code to zero range as it is used by the
XFS_IOC_ZERO_RANGE ioctl.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Back in commit 23956703 ("xfs: inode log reservations are too
small"), the reservation size was increased to take into account the
difference in size between the in-memory BMBT block headers and the
on-disk BMDR headers. This solved a transaction overrun when logging
the inode size.
Recently, however, we've seen a number of these same overruns on
kernels with the above fix in it. All of them have been by 4 bytes,
so we must still not be accounting for something correctly.
Through inspection it turns out the above commit didn't take into
account everything it should have. That is, it only accounts for a
single log op_hdr structure, when it can actually require up to four
op_hdrs - one for each region (log iovec) that is formatted. These
regions are the inode log format header, the inode core, and the two
forks that can be held in the literal area of the inode.
This means we are not accounting for 36 bytes of log space that the
transaction can use, and hence when we get inodes in certain formats
with particular fragmentation patterns we can overrun the
transaction. Fix this by adding the correct accounting for log
op_headers in the transaction.
Tested-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_aops_discard_page() was introduced in the following commit:
xfs: truncate delalloc extents when IO fails in writeback
... to clean up left over delalloc ranges after I/O failure in
->writepage(). generic/224 tests for this scenario and occasionally
reproduces panics on sub-4k blocksize filesystems.
The cause of this is failure to clean up the delalloc range on a
page where the first buffer does not match one of the expected
states of xfs_check_page_type(). If a buffer is not unwritten,
delayed or dirty&mapped, xfs_check_page_type() stops and
immediately returns 0.
The stress test of generic/224 creates a scenario where the first
several buffers of a page with delayed buffers are mapped & uptodate
and some subsequent buffer is delayed. If the ->writepage() happens
to fail for this page, xfs_aops_discard_page() incorrectly skips
the entire page.
This then causes later failures either when direct IO maps the range
and finds the stale delayed buffer, or we evict the inode and find
that the inode still has a delayed block reservation accounted to
it.
We can easily fix this xfs_aops_discard_page() failure by making
xfs_check_page_type() check all buffers, but this breaks
xfs_convert_page() more than it is already broken. Indeed,
xfs_convert_page() wants xfs_check_page_type() to tell it if the
first buffers on the pages are of a type that can be aggregated into
the contiguous IO that is already being built.
xfs_convert_page() should not be writing random buffers out of a
page, but the current behaviour will cause it to do so if there are
buffers that don't match the current specification on the page.
Hence for xfs_convert_page() we need to:
a) return "not ok" if the first buffer on the page does not
match the specification provided to we don't write anything;
and
b) abort it's buffer-add-to-io loop the moment we come
across a buffer that does not match the specification.
Hence we need to fix both xfs_check_page_type() and
xfs_convert_page() to work correctly with pages that have mixed
buffer types, whilst allowing xfs_aops_discard_page() to scan all
buffers on the page for a type match.
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The inode chunk allocation path can lead to deadlock conditions if
a transaction is dirtied with an AGF (to fix up the freelist) for
an AG that cannot satisfy the actual allocation request. This code
path is written to try and avoid this scenario, but it can be
reproduced by running xfstests generic/270 in a loop on a 512b fs.
An example situation is:
- process A attempts an inode allocation on AG 3, modifies
the freelist, fails the allocation and ultimately moves on to
AG 0 with the AG 3 AGF held
- process B is doing a free space operation (i.e., truncate) and
acquires the AG 0 AGF, waits on the AG 3 AGF
- process A acquires the AG 0 AGI, waits on the AG 0 AGF (deadlock)
The problem here is that process A acquired the AG 3 AGF while
moving on to AG 0 (and releasing the AG 3 AGI with the AG 3 AGF
held). xfs_dialloc() makes one pass through each of the AGs when
attempting to allocate an inode chunk. The expectation is a clean
transaction if a particular AG cannot satisfy the allocation
request. xfs_ialloc_ag_alloc() is written to support this through
use of the minalignslop allocation args field.
When using the agi->agi_newino optimization, we attempt an exact
bno allocation request based on the location of the previously
allocated chunk. minalignslop is set to inform the allocator that
we will require alignment on this chunk, and thus to not allow the
request for this AG if the extra space is not available. Suppose
that the AG in question has just enough space for this request, but
not at the requested bno. xfs_alloc_fix_freelist() will proceed as
normal as it determines the request should succeed, and thus it is
allowed to modify the agf. xfs_alloc_ag_vextent() ultimately fails
because the requested bno is not available. In response, the caller
moves on to a NEAR_BNO allocation request for the same AG. The
alignment is set, but the minalignslop field is never reset. This
increases the overall requirement of the request from the first
attempt. If this delta is the difference between allocation success
and failure for the AG, xfs_alloc_fix_freelist() rejects this
request outright the second time around and causes the allocation
request to unnecessarily fail for this AG.
To address this situation, reset the minalignslop field immediately
after use and prevent it from leaking into subsequent requests.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we map pages in the buffer cache, we can do so in GFP_NOFS
contexts. However, the vmap interfaces do not provide any method of
communicating this information to memory reclaim, and hence we get
lockdep complaining about it regularly and occassionally see hangs
that may be vmap related reclaim deadlocks. We can also see these
same problems from anywhere where we use vmalloc for a large buffer
(e.g. attribute code) inside a transaction context.
A typical lockdep report shows up as a reclaim state warning like so:
[14046.101458] =================================
[14046.102850] [ INFO: inconsistent lock state ]
[14046.102850] 3.14.0-rc4+ #2 Not tainted
[14046.102850] ---------------------------------
[14046.102850] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[14046.102850] kswapd0/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
[14046.102850] (&xfs_dir_ilock_class){++++?+}, at: [<791a04bb>] xfs_ilock+0xff/0x16a
[14046.102850] {RECLAIM_FS-ON-W} state was registered at:
[14046.102850] [<7904cdb1>] mark_held_locks+0x81/0xe7
[14046.102850] [<7904d390>] lockdep_trace_alloc+0x5c/0xb4
[14046.102850] [<790c2c28>] kmem_cache_alloc_trace+0x2b/0x11e
[14046.102850] [<790ba7f4>] vm_map_ram+0x119/0x3e6
[14046.102850] [<7914e124>] _xfs_buf_map_pages+0x5b/0xcf
[14046.102850] [<7914ed74>] xfs_buf_get_map+0x67/0x13f
[14046.102850] [<7917506f>] xfs_attr_rmtval_set+0x396/0x4d5
[14046.102850] [<7916e8bb>] xfs_attr_leaf_addname+0x18f/0x37d
[14046.102850] [<7916ed9e>] xfs_attr_set_int+0x2f5/0x3e8
[14046.102850] [<7916eefc>] xfs_attr_set+0x6b/0x74
[14046.102850] [<79168355>] xfs_xattr_set+0x61/0x81
[14046.102850] [<790e5b10>] generic_setxattr+0x59/0x68
[14046.102850] [<790e4c06>] __vfs_setxattr_noperm+0x58/0xce
[14046.102850] [<790e4d0a>] vfs_setxattr+0x8e/0x92
[14046.102850] [<790e4ddd>] setxattr+0xcf/0x159
[14046.102850] [<790e5423>] SyS_lsetxattr+0x88/0xbb
[14046.102850] [<79268438>] sysenter_do_call+0x12/0x36
Now, we can't completely remove these traces - mainly because
vm_map_ram() will do GFP_KERNEL allocation and that generates the
above warning before we get into the reclaim code, but we can turn
them all into false positive warnings.
To do that, use the method that DM and other IO context code uses to
avoid this problem: there is a process flag to tell memory reclaim
not to do IO that we can set appropriately. That prevents GFP_KERNEL
context reclaim being done from deep inside the vmalloc code in
places we can't directly pass a GFP_NOFS context to. That interface
has a pair of wrapper functions: memalloc_noio_save() and
memalloc_noio_restore().
Adding them around vm_map_ram and the vzalloc call in
kmem_alloc_large() will prevent deadlocks and most lockdep reports
for this issue. Also, convert the vzalloc() call in
kmem_alloc_large() to use __vmalloc() so that we can pass the
correct gfp context to the data page allocation routine inside
__vmalloc() so that it is clear that GFP_NOFS context is important
to this vmalloc call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
While the verifier routines may return EFSBADCRC when a buffer has
a bad CRC, we need to translate that to EFSCORRUPTED so that the
higher layers treat the error appropriately and we return a
consistent error to userspace. This fixes a xfs/005 regression.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull filesystem fixes from Jan Kara:
"Notification, writeback, udf, quota fixes
The notification patches are (with one exception) a fallout of my
fsnotify rework which went into -rc1 (I've extented LTP to cover these
cornercases to avoid similar breakage in future).
The UDF patch is a nasty data corruption Al has recently reported,
the revert of the writeback patch is due to possibility of violating
sync(2) guarantees, and a quota bug can lead to corruption of quota
files in ocfs2"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Allocate overflow events with proper type
fanotify: Handle overflow in case of permission events
fsnotify: Fix detection whether overflow event is queued
Revert "writeback: do not sync data dirtied after sync start"
quota: Fix race between dqput() and dquot_scan_active()
udf: Fix data corruption on file type conversion
inotify: Fix reporting of cookies for inotify events
The change to add the IO lock to protect the directory extent map
during readdir operations has cause lockdep to have a heart attack
as it now sees a different locking order on inodes w.r.t. the
mmap_sem because readdir has a different ordering to write().
Add a new lockdep class for directory inodes to avoid this false
positive.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The struct xfs_da_args used to pass directory/attribute operation
information to the lower layers is 128 bytes in size and is
allocated on the stack. Dynamically allocate them to reduce the
stack footprint of directory operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Log forces can occur deep in the call chain when we have relatively
little stack free. Log forces can also happen at close to the call
chain leaves (e.g. xfs_buf_lock()) and hence we can trigger IO from
places where we really don't want to add more stack overhead.
This stack overhead occurs because log forces do foreground CIL
pushes (xlog_cil_push_foreground()) rather than waking the
background push wq and waiting for the for the push to complete.
This foreground push was done to avoid confusing the CFQ Io
scheduler when fsync()s were issued, as it has trouble dealing with
dependent IOs being issued from different process contexts.
Avoiding blowing the stack is much more critical than performance
optimisations for CFQ, especially as we've been recommending against
the use of CFQ for XFS since 3.2 kernels were release because of
it's problems with multi-threaded IO workloads.
Hence convert xlog_cil_push_foreground() to move the push work
to the CIL workqueue. We already do the waiting for the push to
complete in xlog_cil_force_lsn(), so there's nothing else we need to
modify to make this work.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Modify all read & write verifiers to differentiate
between CRC errors and other inconsistencies.
This sets the appropriate error number on bp->b_error,
and then calls xfs_verifier_error() if something went
wrong. That function will issue the appropriate message
to the user.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_error_report used to just print the hex address of the caller;
%pF will give us something more human-readable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We want to distinguish between corruption, CRC errors,
etc. In addition, the full stack trace on verifier errors
seems less than helpful; it looks more like an oops than
corruption.
Create a new function to specifically alert the user to
verifier errors, which can differentiate between
EFSCORRUPTED and CRC mismatches. It doesn't dump stack
unless the xfs error level is turned up high.
Define a new error message (EFSBADCRC) to clearly identify
CRC errors. (Defined to EBADMSG, bad message)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Many/most callers of xfs_update_cksum() pass bp->b_addr and
BBTOB(bp->b_length) as the first 2 args. Add a helper
which can just accept the bp and the crc offset, and work
it out on its own, for brevity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Many/most callers of xfs_verify_cksum() pass bp->b_addr and
BBTOB(bp->b_length) as the first 2 args. Add a helper
which can just accept the bp and the crc offset, and work
it out on its own, for brevity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some calls to crc functions used useful #defines,
others used awkward offsetof() constructs.
Switch them all to #define to make things a bit cleaner.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Most write verifiers don't update CRCs after the verifier
has failed and the buffer has been marked in error. These
two didn't, but should.
Add returns to the verifier failure block, since the buffer
won't be written anyway.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for XFS.
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
blocks which are present in this range and than updates all the logical
offsets of extents beyond "offset + len" to nullify the hole created by
removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull xfs fixes from Dave Chinner:
"This is the first pull request I've had to do for you, so I'm still
sorting things out. The reason I'm sending this and not Ben should be
obvious from the first commit below - SGI has stepped down from the
XFS maintainership role. As such, I'd like to take another
opportunity to thank them for their many years of effort maintaining
XFS and supporting the XFS community that they developed from the
ground up.
So I haven't had time to work things like signed tags into my
workflows yet, so this is just a repo branch I'm asking you to pull
from. And yes, I named the branch -rc4 because I wanted the fixes in
rc4, not because the branch was for merging into -rc3. Probably not
right, either.
Anyway, I should have everything sorted out by the time the next merge
window comes around. If there's anything that you don't like in the
pull req, feel free to flame me unmercifully.
The changes are fixes for recent regressions and important thinkos in
verification code:
- a log vector buffer alignment issue on ia32
- timestamps on truncate got mangled
- primary superblock CRC validation fixes and error message
sanitisation"
* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: limit superblock corruption errors to actual corruption
xfs: skip verification on initial "guess" superblock read
MAINTAINERS: SGI no longer maintaining XFS
xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
xfs: ensure correct log item buffer alignment
xfs: ensure correct timestamp updates from truncate
This reverts commit c4a391b53a. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.
CC: stable@vger.kernel.org # >= 3.13
Signed-off-by: Jan Kara <jack@suse.cz>
Today, if
xfs_sb_read_verify
xfs_sb_verify
xfs_mount_validate_sb
detects superblock corruption, it'll be extremely noisy, dumping
2 stacks, 2 hexdumps, etc.
This is because we call XFS_CORRUPTION_ERROR in xfs_mount_validate_sb
as well as in xfs_sb_read_verify.
Also, *any* errors in xfs_mount_validate_sb which are not corruption
per se; things like too-big-blocksize, bad version, bad magic, v1 dirs,
rw-incompat etc - things which do not return EFSCORRUPTED - will
still do the whole XFS_CORRUPTION_ERROR spew when xfs_sb_read_verify
sees any error at all. And it suggests to the user that they
should run xfs_repair, even if the root cause of the mount failure
is a simple incompatibility.
I'll submit that the probably-not-corrupted errors don't warrant
this much noise, so this patch removes the warning for anything
other than EFSCORRUPTED returns, and replaces the lower-level
XFS_CORRUPTION_ERROR with an xfs_notice().
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When xfs_readsb() does the very first read of the superblock,
it makes a guess at the length of the buffer, based on the
sector size of the underlying storage. This may or may
not match the filesystem sector size in sb_sectsize, so
we can't i.e. do a CRC check on it; it might be too short.
In fact, mounting a filesystem with sb_sectsize larger
than the device sector size will cause a mount failure
if CRCs are enabled, because we are checksumming a length
which exceeds the buffer passed to it.
So always read twice; the first time we read with NULL
buffer ops to skip verification; then set the proper
read length, hook up the proper verifier, and give it
another go.
Once we are sure that we've got the right buffer length,
we can also use bp->b_length in the xfs_sb_read_verify,
rather than the less-trusted on-disk sectorsize for
secondary superblocks. Before this we ran the risk of
passing junk to the crc32c routines, which didn't always
handle extreme values.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
My earlier commit 10e6e65 deserves a layer or two of brown paper
bags. The logic in that commit means that a CRC failure on the
primary superblock will *never* result in an error return.
Hopefully this fixes it, so that we always return the error
if it's a primary superblock, otherwise only if the filesystem
has CRCs enabled.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
On 32 bit platforms, the log item vector headers are not 64 bit
aligned or sized. hence if we don't take care to align them
correctly or pad the buffer appropriately for 8 byte alignment, we
can end up with alignment issues when accessing the user buffer
directly as a structure.
To solve this, simply pad the buffer headers to 64 bit offset so
that the data section is always 8 byte aligned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Tested-by: Michael L. Semon <mlsemon35@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The VFS doesn't set the proper ATTR_CTIME and ATTR_MTIME values for
truncate, so filesystems have to manually add them. The
introduction of xfs_setattr_time accidentally broke this special
case an caused a regression in generic/313. Fix this by removing
the local mask variable in xfs_setattr_size so that we only have a
single place to keep the attribute information.
cc: <stable@vger.kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS can easily support appending aio writes by ensuring we always allocate
blocks as unwritten extents when performing direct I/O writes and only
converting them to written extents at I/O completion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To allow aio writes beyond i_size we need to create unwritten extents for
newly allocated blocks, similar to how we already do inside i_size.
Instead of adding another special case we now use unwritten extents
unconditionally. This also marks the end of directly allocation data
extents in all of XFS - we now always use either delalloc or unwritten
extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support)
when sync_page_range() had been introduced; generic_file_write{,v}() correctly
synced
pos_after_write - written .. pos_after_write - 1
but generic_file_aio_write() synced
pos_before_write .. pos_before_write + written - 1
instead. Which is not the same thing with O_APPEND, obviously.
A couple of years later correct variant had been killed off when
everything switched to use of generic_file_aio_write().
All users of generic_file_aio_write() are affected, and the same bug
has been copied into other instances of ->aio_write().
The fix is trivial; the only subtle point is that generic_write_sync()
ought to be inlined to avoid calculations useless for the majority of
calls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the leftover XFS_TRANS_DEBUG dead code following the previous
cleaning up of it in commits ec47eb6b0b.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We should return -E2BIG rather than -EINVAL if hit the maximum size
limits of ACLS, as the former is consistent with VFS xattr syscalls.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_mount_validate_sb doesn't check sb_inopblock for sanity
(as does its xfs_repair counterpart, FWIW).
If it's out of bounds, we can go off the rails in i.e.
xfs_inode_buf_verify(), which uses sb_inopblock as a loop
limit when stepping through a metadata buffer.
The problem can be demonstrated easily by corrupting
sb_inopblock with xfs_db and trying to mount the result:
# mkfs.xfs -dfile,name=fsfile,size=1g
# xfs_db -x fsfile
xfs_db> sb 0
xfs_db> write inopblock 512
inopblock = 512
xfs_db> quit
# mount -o loop fsfile mnt
and we blow up in xfs_inode_buf_verify().
With this patch, we get a (very noisy) corruption error,
and fail the mount as we should.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Convert xfs_log_commit_cil() to a void function since it return nothing
but 0 in any case, after that we can simplify the relative code logic
in xfs_trans_commit() accordingly.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The dquot allocation path in xfs_qm_dqread() currently uses the
attribute set log reservation, which appears to be incorrect. We
have reports of transaction reservation overruns with the current
code. E.g., a repeated run of xfstests test generic/270 on a 512b
block size fs occassionally produces the following in dmesg:
XFS (sdN): xlog_write: reservation summary:
trans type = QM_DQALLOC (30)
unit res = 7080 bytes
current res = -632 bytes
total reg = 0 bytes (o/flow = 0 bytes)
ophdrs = 0 (ophdr space = 0 bytes)
ophdr + reg = 0 bytes
num regions = 0
XFS (sdN): xlog_write: reservation ran out. Need to up reservation
The dquot allocation case should consist of a write reservation
(i.e., we are allocating a range of the internal quota file) plus
the size of the actual dquots. We already have a log reservation
definition for this operation (tr_qm_dqalloc). Use it in
xfs_qm_dqread() and update the log reservation calculation function
to use the write res. calculation function rather than reading the
assumed to be pre-calculated value directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
tr_swrite is never used, remove it.
From a very quick look, I think the usage of it (and its ancestor
XFS_SWRITE_LOG_RES) went away in commit 13e6d5cd "xfs: merge fsync
and O_SYNC handling" back in 2009.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This is a regression from the following commit:
3d3c8b5222 xfs: refactor xfs_trans_reserve() interface
Use the tr_growrtalloc log reservation for growing the
bitmap/summary files.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
Pull vfs updates from Al Viro:
"Assorted stuff; the biggest pile here is Christoph's ACL series. Plus
assorted cleanups and fixes all over the place...
There will be another pile later this week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
__dentry_path() fixes
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.
Fix race when checking i_size on direct i/o read
hfsplus: remove can_set_xattr
nfsd: use get_acl and ->set_acl
fs: remove generic_acl
nfs: use generic posix ACL infrastructure for v3 Posix ACLs
gfs2: use generic posix ACL infrastructure
jfs: use generic posix ACL infrastructure
xfs: use generic posix ACL infrastructure
reiserfs: use generic posix ACL infrastructure
ocfs2: use generic posix ACL infrastructure
jffs2: use generic posix ACL infrastructure
hfsplus: use generic posix ACL infrastructure
f2fs: use generic posix ACL infrastructure
ext2/3/4: use generic posix ACL infrastructure
btrfs: use generic posix ACL infrastructure
fs: make posix_acl_create more useful
fs: make posix_acl_chmod more useful
...
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux,
and create inodes with the proper mode instead of fixing it up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_created to __posix_acl_create and add
a fully featured helper to set up the ACLs on file creation that
uses get_acl().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_chmod to __posix_acl_chmod and add
a fully featured ACL chmod helper that uses the ->set_acl inode
operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some time ago, mkfs.xfs started picking the storage physical
sector size as the default filesystem "sector size" in order
to avoid RMW costs incurred by doing IOs at logical sector
size alignments.
However, this means that for a filesystem made with i.e.
a 4k sector size on an "advanced format" 4k/512 disk,
512-byte direct IOs are no longer allowed. This means
that XFS has essentially turned this AF drive into a hard
4K device, from the filesystem on up.
XFS's mkfs-specified "sector size" is really just controlling
the minimum size & alignment of filesystem metadata.
There is no real need to tightly couple XFS's minimal
metadata size to the minimum allowed direct IO size;
XFS can continue doing metadata in optimal sizes, but
still allow smaller DIOs for apps which issue them,
for whatever reason.
This patch adds a new field to the xfs_buftarg, so that
we now track 2 sizes:
1) The metadata sector size, which is the minimum unit and
alignment of IO which will be performed by metadata operations.
2) The device logical sector size
The first is used internally by the file system for metadata
alignment and IOs.
The second is used for the minimum allowed direct IO alignment.
This has passed xfstests on filesystems made with 4k sectors,
including when run under the patch I sent to ignore
XFS_IOC_DIOINFO, and issue 512 DIOs anyway. I also directly
tested end of block behavior on preallocated, sparse, and
existing files when we do a 512 IO into a 4k file on a
4k-sector filesystem, to be sure there were no unexpected
behaviors.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for adding new members to the structure,
give these old ones more descriptive names:
bt_ssize -> bt_meta_sectorsize
bt_smask -> bt_meta_sectormask
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Clean up the xfs_buftarg structure a bit:
- remove bt_bsize which is never used
- replace bt_sshift with bt_ssize; we only ever shift it back
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 6f96b3063c)
With CRC check is enabled, if trying to set an attributes value just
equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote
attr write verification procedure failure, which would yield the back
trace like below:
<snip>
XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c
<snip>
Call Trace:
[<ffffffff816f0042>] dump_stack+0x45/0x56
[<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs]
[<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460
[<ffffffff81097230>] ? wake_up_state+0x20/0x20
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs]
[<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs]
[<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs]
[<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs]
[<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs]
[<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs]
[<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs]
[<ffffffff811df9b2>] generic_setxattr+0x62/0x80
[<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0
[<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10
[<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0
[<ffffffff811e054e>] setxattr+0x12e/0x1c0
[<ffffffff811c6e82>] ? final_putname+0x22/0x50
[<ffffffff811c708b>] ? putname+0x2b/0x40
[<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90
[<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0
[<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0
[<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0
[<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f
Tests:
setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile
This patch fix it to check the remote EA size is greater than the
XATTR_SIZE_MAX rather than more than or equal to it, because it's
valid if the specified EA value size is equal to the limitation as
per VFS setxattr interface.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 85dd0707f0)
A set of fixes which makes sure we are taking the ilock whenever accessing the
extent list. This was associated with "Access to block zero" messages which
may result in extent list corruption.
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The VFS allows an anonymous temporary file to be named at a later
time via a linkat() syscall. The inodes for O_TMPFILE files are
are marked with a special flag I_LINKABLE and have a zero link count.
To support this in XFS, xfs_link() detects if this flag I_LINKABLE
is set and behaves appropriately when detected. So in this case,
its transaciton reservation takes into account the additional
overhead of removing the inode from the unlinked list. Then the
inode is removed from the unlinked list and the directory entry
is added. Finally its link count is bumped accordingly.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add two functions xfs_create_tmpfile() and xfs_vn_tmpfile()
to support O_TMPFILE file creation.
In contrast to xfs_create(), xfs_create_tmpfile() has a different
log reservation to the regular file creation because there is no
directory modification, and doesn't check if an entry can be added
to the directory, but the reservation quotas is required appropriately,
and finally its inode is added to the unlinked list.
xfs_vn_tmpfile() add one O_TMPFILE method to VFS interface and directly
invoke xfs_create_tmpfile().
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
It will be reused by the O_TMPFILE creation function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With CRC check is enabled, if trying to set an attributes value just
equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote
attr write verification procedure failure, which would yield the back
trace like below:
<snip>
XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c
<snip>
Call Trace:
[<ffffffff816f0042>] dump_stack+0x45/0x56
[<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs]
[<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460
[<ffffffff81097230>] ? wake_up_state+0x20/0x20
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs]
[<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs]
[<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs]
[<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs]
[<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs]
[<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs]
[<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs]
[<ffffffff811df9b2>] generic_setxattr+0x62/0x80
[<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0
[<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10
[<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0
[<ffffffff811e054e>] setxattr+0x12e/0x1c0
[<ffffffff811c6e82>] ? final_putname+0x22/0x50
[<ffffffff811c708b>] ? putname+0x2b/0x40
[<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90
[<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0
[<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0
[<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0
[<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f
Tests:
setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile
This patch fix it to check the remote EA size is greater than the
XATTR_SIZE_MAX rather than more than or equal to it, because it's
valid if the specified EA value size is equal to the limitation as
per VFS setxattr interface.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
=/4/R
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc6' into for-3.14/core
Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.
Fixup merge issues related to the immutable biovec changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conflicts:
block/blk-flush.c
fs/btrfs/check-integrity.c
fs/btrfs/extent_io.c
fs/btrfs/scrub.c
fs/logfs/dev_bdev.c
Make sure that xfs_bmapi_read has the ilock held in some way, and that
xfs_bmapi_write, xfs_bmapi_delay, xfs_bunmapi and xfs_iread_extents are
called with the ilock held exclusively.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We might not have read in the extent list at this point, so make sure we
take the ilock exclusively if we have to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We might not have read in the extent list at this point, so make sure we
take the ilock exclusively if we have to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We might not have read in the extent list at this point, so make sure we
take the ilock exclusively if we have to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We might not have read in the extent list at this point, so make sure we
take the ilock exclusively if we have to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Although it was removed in commit 051e7cd44a, ilock needs to be taken in
xfs_readdir because we might have to read the extent list in from disk. This
keeps other threads from reading from or writing to the extent list while it is
being read in and is still in a transitional state.
This has been associated with "Access to block zero" messages on directories
with large numbers of extents resulting from excessive filesytem fragmentation,
as well as extent list corruption. Unfortunately no test case at this point.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Equivalent to xfs_ilock_data_map_shared, except for the attribute fork.
Make xfs_getbmap use it if called for the attribute fork instead of
xfs_ilock_data_map_shared.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Make it clear that we're only locking against the extent map on the data
fork. Also clean the function up a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We can just use xfs_iunlock without any loss of clarity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Both the inode number and the generation do not change on a live inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we are doing aysnc writeback of metadata, we can get write errors
but have nobody to report them to. At the moment, we simply attempt
to reissue the write from io completion in the hope that it's a
transient error.
When it's not a transient error, the buffer is stuck forever in
this loop, and we cannot break out of it. Eventually, unmount will
hang because the AIL cannot be emptied and everything goes downhill
from them.
To solve this problem, only retry the write IO once before aborting
it. We don't throw the buffer away because some transient errors can
last minutes (e.g. FC path failover) or even hours (thin
provisioned devices that have run out of backing space) before they
go away. Hence we really want to keep trying until we can't try any
more.
Because the buffer was not cleaned, however, it does not get removed
from the AIL and hence the next pass across the AIL will start IO on
it again. As such, we still get the "retry forever" semantics that
we currently have, but we allow other access to the buffer in the
mean time. Meanwhile the filesystem can continue to modify the
buffer and relog it, so the IO errors won't hang the log or the
filesystem.
Now when we are pushing the AIL, we can see all these "permanent IO
error" buffers and we can issue a warning about failures before we
retry the IO. We can also catch these buffers when unmounting an
issue a corruption warning, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
When swalloc is specified as a mount option, allocations are
supposed to be aligned to the stripe width rather than the stripe
unit of the underlying filesystem. However, it does not do this.
What the implementation does is round up the allocation size to a
stripe width, hence ensuring that all allocations span a full stripe
width. It does not, however, ensure that that allocation is aligned
to a stripe width, and hence the allocations can span multiple
underlying stripes and so still see RMW cycles for things like
direct IO on MD RAID.
So, if the swalloc mount option is set, change the allocation
alignment in xfs_bmap_btalloc() to use the stripe width rather than
the stripe unit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xfsbdstrat helper is a small but useless wrapper for xfs_buf_iorequest that
handles the case of a shut down filesystem. Most of the users have private,
uncached buffers that can just be freed in this case, but the complex error
handling in xfs_bioerror_relse messes up the case when it's called without
a locked buffer.
Remove xfsbdstrat and opencode the error handling in the callers. All but
one can simply return an error and don't need to deal with buffer state,
and the one caller that cares about the buffer state could do with a major
cleanup as well, but we'll defer that to later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The function xfs_bmap_isaeof() is used to indicate that an
allocation is occurring at or past the end of file, and as such
should be aligned to the underlying storage geometry if possible.
Commit 27a3f8f ("xfs: introduce xfs_bmap_last_extent") changed the
behaviour of this function for empty files - it turned off
allocation alignment for this case accidentally. Hence large initial
allocations from direct IO are not getting correctly aligned to the
underlying geometry, and that is cause write performance to drop in
alignment sensitive configurations.
Fix it by considering allocation into empty files as requiring
aligned allocation again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit f9b395a8ef)
xfs_quota(8) will hang up if trying to turn group/project quota off
before the user quota is off, this could be 100% reproduced by:
# mount -ouquota,gquota /dev/sda7 /xfs
# mkdir /xfs/test
# xfs_quota -xc 'off -g' /xfs <-- hangs up
# echo w > /proc/sysrq-trigger
# dmesg
SysRq : Show Blocked State
task PC stack pid father
xfs_quota D 0000000000000000 0 27574 2551 0x00000000
[snip]
Call Trace:
[<ffffffff81aaa21d>] schedule+0xad/0xc0
[<ffffffff81aa327e>] schedule_timeout+0x35e/0x3c0
[<ffffffff8114b506>] ? mark_held_locks+0x176/0x1c0
[<ffffffff810ad6c0>] ? call_timer_fn+0x2c0/0x2c0
[<ffffffffa0c25380>] ? xfs_qm_shrink_count+0x30/0x30 [xfs]
[<ffffffff81aa3306>] schedule_timeout_uninterruptible+0x26/0x30
[<ffffffffa0c26155>] xfs_qm_dquot_walk+0x235/0x260 [xfs]
[<ffffffffa0c059d8>] ? xfs_perag_get+0x1d8/0x2d0 [xfs]
[<ffffffffa0c05805>] ? xfs_perag_get+0x5/0x2d0 [xfs]
[<ffffffffa0b7707e>] ? xfs_inode_ag_iterator+0xae/0xf0 [xfs]
[<ffffffffa0c22280>] ? xfs_trans_free_dqinfo+0x50/0x50 [xfs]
[<ffffffffa0b7709f>] ? xfs_inode_ag_iterator+0xcf/0xf0 [xfs]
[<ffffffffa0c261e6>] xfs_qm_dqpurge_all+0x66/0xb0 [xfs]
[<ffffffffa0c2497a>] xfs_qm_scall_quotaoff+0x20a/0x5f0 [xfs]
[<ffffffffa0c2b8f6>] xfs_fs_set_xstate+0x136/0x180 [xfs]
[<ffffffff8136cf7a>] do_quotactl+0x53a/0x6b0
[<ffffffff812fba4b>] ? iput+0x5b/0x90
[<ffffffff8136d257>] SyS_quotactl+0x167/0x1d0
[<ffffffff814cf2ee>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff81abcd19>] system_call_fastpath+0x16/0x1b
It's fine if we turn user quota off at first, then turn off other
kind of quotas if they are enabled since the group/project dquot
refcount is decreased to zero once the user quota if off. Otherwise,
those dquots refcount is non-zero due to the user dquot might refer
to them as hint(s). Hence, above operation cause an infinite loop
at xfs_qm_dquot_walk() while trying to purge dquot cache.
This problem has been around since Linux 3.4, it was introduced by:
[ b84a3a9675 xfs: remove the per-filesystem list of dquots ]
Originally we will release the group dquot pointers because the user
dquots maybe carrying around as a hint via xfs_qm_detach_gdquots().
However, with above change, there is no such work to be done before
purging group/project dquot cache.
In order to solve this problem, this patch introduces a special routine
xfs_qm_dqpurge_hints(), and it would release the group/project dquot
pointers the user dquots maybe carrying around as a hint, and then it
will proceed to purge the user dquot cache if requested.
Cc: stable@vger.kernel.org
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit df8052e7da)
For CRC enabled v5 super block, change a file's ownership can simply
trigger an ASSERT failure at xfs_setattr_nonsize() if both group and
project quota are enabled, i.e,
[ 305.337609] XFS: Assertion failed: !XFS_IS_PQUOTA_ON(mp), file: fs/xfs/xfs_iops.c, line: 621
[ 305.339250] Kernel BUG at ffffffffa0a7fa32 [verbose debug info unavailable]
[ 305.383939] Call Trace:
[ 305.385536] [<ffffffffa0a7d95a>] xfs_setattr_nonsize+0x69a/0x720 [xfs]
[ 305.387142] [<ffffffffa0a7dea9>] xfs_vn_setattr+0x29/0x70 [xfs]
[ 305.388727] [<ffffffff811ca388>] notify_change+0x1a8/0x350
[ 305.390298] [<ffffffff811ac39d>] chown_common+0xfd/0x110
[ 305.391868] [<ffffffff811ad6bf>] SyS_fchownat+0xaf/0x110
[ 305.393440] [<ffffffff811ad760>] SyS_lchown+0x20/0x30
[ 305.394995] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f
[ 305.399870] RIP [<ffffffffa0a7fa32>] assfail+0x22/0x30 [xfs]
This fix adjust the assertion to check if the super block support both
quota inodes or not.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 5a01dd54f4)
After the previous fix, there still has another ASSERT failure if turning
off any type of quota while fsstress is running at the same time.
Backtrace in this case:
[ 50.867897] XFS: Assertion failed: XFS_IS_GQUOTA_ON(mp), file: fs/xfs/xfs_qm.c, line: 2118
[ 50.867924] ------------[ cut here ]------------
... <snip>
[ 50.867957] Kernel BUG at ffffffffa0b55a32 [verbose debug info unavailable]
[ 50.867999] invalid opcode: 0000 [#1] SMP
[ 50.869407] Call Trace:
[ 50.869446] [<ffffffffa0bc408a>] xfs_qm_vop_create_dqattach+0x19a/0x2d0 [xfs]
[ 50.869512] [<ffffffffa0b9cc45>] xfs_create+0x5c5/0x6a0 [xfs]
[ 50.869564] [<ffffffffa0b5307c>] xfs_vn_mknod+0xac/0x1d0 [xfs]
[ 50.869615] [<ffffffffa0b531d6>] xfs_vn_mkdir+0x16/0x20 [xfs]
[ 50.869655] [<ffffffff811becd5>] vfs_mkdir+0x95/0x130
[ 50.869689] [<ffffffff811bf63a>] SyS_mkdirat+0xaa/0xe0
[ 50.869723] [<ffffffff811bf689>] SyS_mkdir+0x19/0x20
[ 50.869757] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f
[ 50.869793] Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 <snip>
[ 50.870003] RIP [<ffffffffa0b55a32>] assfail+0x22/0x30 [xfs]
[ 50.870050] RSP <ffff88002941fd60>
[ 50.879251] ---[ end trace c93a2b342341c65b ]---
We're hitting the ASSERT(XFS_IS_*QUOTA_ON(mp)) in xfs_qm_vop_create_dqattach(),
however the assertion itself is not right IMHO. While performing quota off, we
firstly clear the XFS_*QUOTA_ACTIVE bit(s) from struct xfs_mount without taking
any special locks, see xfs_qm_scall_quotaoff(). Hence there is no guarantee
that the desired quota is still active.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 37eb9706eb)
Fix the leak of kernel memory in xfs_dir2_node_removename()
when xfs_dir2_leafn_remove() returns an error code.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit ef701600fd)
Use xfs_icluster_size_fsb() in xfs_imap().
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use xfs_icluster_size_fsb() in xfs_ifree_cluster(), rename variable
ninodes to inodes_per_cluster, the latter is more meaningful.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use xfs_icluster_size_fsb() in xfs_ialloc_inode_init(), rename variable
ninodes to inodes_per_cluster, the latter is more meaningful.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use xfs_icluster_size_fsb() in xfs_bulkstat(), make the related
variables more meaningful and remove an unused variable nimask
from it.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Introduce a common routine xfs_icluster_size_fsb() to calculate
and return the number of file system blocks per inode cluster.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Get rid of XFS_IALLOC_BLOCKS() marcos, use mp->m_ialloc_blks directly.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Get rid of XFS_INODE_CLUSTER_SIZE() macros, use mp->m_inode_cluster_size
directly.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Get rid of XFS_IALLOC_INODES() marcos, use mp->m_ialloc_inos directly.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This one doesn't save a whole lot of memory, but still makes the
code simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
No need to keep the dquot log format around all the time, we can
easily generate it at iop_format time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
No need to keep the inode log format around all the time, we can
easily generate it at iop_format time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the new iop_format scheme there is no need to have a temporary buffer
to format logged extents into, we can do so directly into the CIL. This
also allows to remove the shortcut for big endian systems that probably
hasn't gotten a lot of test coverage for a long time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Instead of setting up pointers to memory locations in iop_format which then
get copied into the CIL linear buffer after return move the copy into
the individual inode items. This avoids the need to always have a memory
block in the exact same layout that gets written into the log around, and
allow the log items to be much more flexible in their in-memory layouts.
The only caveat is that we need to properly align the data for each
iovec so that don't have structures misaligned in subsequent iovecs.
Note that all log item format routines now need to be careful to modify
the copy of the item that was placed into the CIL after calls to
xlog_copy_iovec instead of the in-memory copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a helper to abstract out filling the log iovecs in the log item
format handlers. This will allow us to change the way we do the log
item formatting more easily.
The copy in the name is a bit confusing for now as it just assigns a
pointer and lets the CIL code perform the copy, but that will change
soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Split out a function to handle the data and attr fork, as well as a
helper for the really old v1 inodes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Split out two helpers to size the data and attribute to make the
function more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add two helpers to make the code more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Share code that was previously duplicated in two branches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The function xfs_bmap_isaeof() is used to indicate that an
allocation is occurring at or past the end of file, and as such
should be aligned to the underlying storage geometry if possible.
Commit 27a3f8f ("xfs: introduce xfs_bmap_last_extent") changed the
behaviour of this function for empty files - it turned off
allocation alignment for this case accidentally. Hence large initial
allocations from direct IO are not getting correctly aligned to the
underlying geometry, and that is cause write performance to drop in
alignment sensitive configurations.
Fix it by considering allocation into empty files as requiring
aligned allocation again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
rec.ir_startino is an agino rather than an ino. Use the correct macro
when dealing with it in xfs_difree.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we are using a large directory block size, and memory becomes
fragmented, we can get memory allocation failures trying to
kmem_alloc(64k) for a temporary buffer. However, there is not need
for a directory buffer sized allocation, as the end result ends up
in the inode literal area. This is, at most, slightly less than 2k
of space, and hence we don't need an allocation larger than that
fora temporary buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This loop in xfs_growfs_data_private() is incorrect for V4
superblocks filesystems:
for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++)
agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK);
For V4 filesystems, we don't have a agfl header structure, and so
XFS_AGFL_SIZE() returns an entire sector's worth of entries, which
we then index from an offset into the sector. Hence: buffer overrun.
This problem was introduced in 3.10 by commit 77c95bba ("xfs: add
CRC checks to the AGFL") which changed the AGFL structure but failed
to update the growfs code to handle the different structures.
Fix it by using the correct offset into the buffer for both V4 and
V5 filesystems.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit b7d961b35b)
For discard operation, we should return EINVAL if the given range length
is less than a block size, otherwise it will go through the file system
to discard data blocks as the end range might be evaluated to -1, e.g,
# fstrim -v -o 0 -l 100 /xfs7
/xfs7: 9811378176 bytes were trimmed
This issue can be triggered via xfstests/generic/288.
Also, it seems to get the request queue pointer via bdev_get_queue()
instead of the hard code pointer dereference is not a bad thing.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit f9fd013561)
If we allocate less than sizeof(struct attrlist) then we end up
corrupting memory or doing a ZERO_PTR_SIZE dereference.
This can only be triggered with CAP_SYS_ADMIN.
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 071c529eb6)
xfs_quota(8) will hang up if trying to turn group/project quota off
before the user quota is off, this could be 100% reproduced by:
# mount -ouquota,gquota /dev/sda7 /xfs
# mkdir /xfs/test
# xfs_quota -xc 'off -g' /xfs <-- hangs up
# echo w > /proc/sysrq-trigger
# dmesg
SysRq : Show Blocked State
task PC stack pid father
xfs_quota D 0000000000000000 0 27574 2551 0x00000000
[snip]
Call Trace:
[<ffffffff81aaa21d>] schedule+0xad/0xc0
[<ffffffff81aa327e>] schedule_timeout+0x35e/0x3c0
[<ffffffff8114b506>] ? mark_held_locks+0x176/0x1c0
[<ffffffff810ad6c0>] ? call_timer_fn+0x2c0/0x2c0
[<ffffffffa0c25380>] ? xfs_qm_shrink_count+0x30/0x30 [xfs]
[<ffffffff81aa3306>] schedule_timeout_uninterruptible+0x26/0x30
[<ffffffffa0c26155>] xfs_qm_dquot_walk+0x235/0x260 [xfs]
[<ffffffffa0c059d8>] ? xfs_perag_get+0x1d8/0x2d0 [xfs]
[<ffffffffa0c05805>] ? xfs_perag_get+0x5/0x2d0 [xfs]
[<ffffffffa0b7707e>] ? xfs_inode_ag_iterator+0xae/0xf0 [xfs]
[<ffffffffa0c22280>] ? xfs_trans_free_dqinfo+0x50/0x50 [xfs]
[<ffffffffa0b7709f>] ? xfs_inode_ag_iterator+0xcf/0xf0 [xfs]
[<ffffffffa0c261e6>] xfs_qm_dqpurge_all+0x66/0xb0 [xfs]
[<ffffffffa0c2497a>] xfs_qm_scall_quotaoff+0x20a/0x5f0 [xfs]
[<ffffffffa0c2b8f6>] xfs_fs_set_xstate+0x136/0x180 [xfs]
[<ffffffff8136cf7a>] do_quotactl+0x53a/0x6b0
[<ffffffff812fba4b>] ? iput+0x5b/0x90
[<ffffffff8136d257>] SyS_quotactl+0x167/0x1d0
[<ffffffff814cf2ee>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff81abcd19>] system_call_fastpath+0x16/0x1b
It's fine if we turn user quota off at first, then turn off other
kind of quotas if they are enabled since the group/project dquot
refcount is decreased to zero once the user quota if off. Otherwise,
those dquots refcount is non-zero due to the user dquot might refer
to them as hint(s). Hence, above operation cause an infinite loop
at xfs_qm_dquot_walk() while trying to purge dquot cache.
This problem has been around since Linux 3.4, it was introduced by:
[ b84a3a9675 xfs: remove the per-filesystem list of dquots ]
Originally we will release the group dquot pointers because the user
dquots maybe carrying around as a hint via xfs_qm_detach_gdquots().
However, with above change, there is no such work to be done before
purging group/project dquot cache.
In order to solve this problem, this patch introduces a special routine
xfs_qm_dqpurge_hints(), and it would release the group/project dquot
pointers the user dquots maybe carrying around as a hint, and then it
will proceed to purge the user dquot cache if requested.
Cc: stable@vger.kernel.org
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For CRC enabled v5 super block, change a file's ownership can simply
trigger an ASSERT failure at xfs_setattr_nonsize() if both group and
project quota are enabled, i.e,
[ 305.337609] XFS: Assertion failed: !XFS_IS_PQUOTA_ON(mp), file: fs/xfs/xfs_iops.c, line: 621
[ 305.339250] Kernel BUG at ffffffffa0a7fa32 [verbose debug info unavailable]
[ 305.383939] Call Trace:
[ 305.385536] [<ffffffffa0a7d95a>] xfs_setattr_nonsize+0x69a/0x720 [xfs]
[ 305.387142] [<ffffffffa0a7dea9>] xfs_vn_setattr+0x29/0x70 [xfs]
[ 305.388727] [<ffffffff811ca388>] notify_change+0x1a8/0x350
[ 305.390298] [<ffffffff811ac39d>] chown_common+0xfd/0x110
[ 305.391868] [<ffffffff811ad6bf>] SyS_fchownat+0xaf/0x110
[ 305.393440] [<ffffffff811ad760>] SyS_lchown+0x20/0x30
[ 305.394995] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f
[ 305.399870] RIP [<ffffffffa0a7fa32>] assfail+0x22/0x30 [xfs]
This fix adjust the assertion to check if the super block support both
quota inodes or not.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Split out a xfs_setattr_time helper to share code between truncate and
regular setattr similar to xfs_setattr_mode. I might also have another
caller growing for this in the near future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Remove the pointless tp argument, and properly align the local variable
declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
After the previous fix, there still has another ASSERT failure if turning
off any type of quota while fsstress is running at the same time.
Backtrace in this case:
[ 50.867897] XFS: Assertion failed: XFS_IS_GQUOTA_ON(mp), file: fs/xfs/xfs_qm.c, line: 2118
[ 50.867924] ------------[ cut here ]------------
... <snip>
[ 50.867957] Kernel BUG at ffffffffa0b55a32 [verbose debug info unavailable]
[ 50.867999] invalid opcode: 0000 [#1] SMP
[ 50.869407] Call Trace:
[ 50.869446] [<ffffffffa0bc408a>] xfs_qm_vop_create_dqattach+0x19a/0x2d0 [xfs]
[ 50.869512] [<ffffffffa0b9cc45>] xfs_create+0x5c5/0x6a0 [xfs]
[ 50.869564] [<ffffffffa0b5307c>] xfs_vn_mknod+0xac/0x1d0 [xfs]
[ 50.869615] [<ffffffffa0b531d6>] xfs_vn_mkdir+0x16/0x20 [xfs]
[ 50.869655] [<ffffffff811becd5>] vfs_mkdir+0x95/0x130
[ 50.869689] [<ffffffff811bf63a>] SyS_mkdirat+0xaa/0xe0
[ 50.869723] [<ffffffff811bf689>] SyS_mkdir+0x19/0x20
[ 50.869757] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f
[ 50.869793] Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 <snip>
[ 50.870003] RIP [<ffffffffa0b55a32>] assfail+0x22/0x30 [xfs]
[ 50.870050] RSP <ffff88002941fd60>
[ 50.879251] ---[ end trace c93a2b342341c65b ]---
We're hitting the ASSERT(XFS_IS_*QUOTA_ON(mp)) in xfs_qm_vop_create_dqattach(),
however the assertion itself is not right IMHO. While performing quota off, we
firstly clear the XFS_*QUOTA_ACTIVE bit(s) from struct xfs_mount without taking
any special locks, see xfs_qm_scall_quotaoff(). Hence there is no guarantee
that the desired quota is still active.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xfs_quota_priv header file is only included by xfs_qm header and
there is no much users for its contents, hence we can move those stuff
to xfs_qm header file and kill it.
This patch also remove an unused macro DQFLAGTO_TYPESTR.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
In xfs_qm_scall_trunc_qfiles(), we ignore the error if failed to remove
the users quota metadata and proceed to remove groups and projects if
they are being there. However, in user space, the remove operation will
break and return if failed to remove any kind of quota.
Also for v5 super block, we can enabled both group and project quota at
the same time, in this case the current error handling will cover the
group error with projects but they might failed due to different reasons.
It seems we'd better the error handling consistent to the user space and
don't trying to remove another kind of quota metadata if the previous
operation is failed.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Fix the leak of kernel memory in xfs_dir2_node_removename()
when xfs_dir2_leafn_remove() returns an error code.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Recovery builds a list of items on the transaction's
r_itemq head. Normally these items are committed and freed.
But in the event of a recovery error, these allocations
are leaked.
If the error occurs during item reordering, then reconstruct
the r_itemq list before deleting the list to avoid leaking
the entries that were on one of the temporary lists.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This loop in xfs_growfs_data_private() is incorrect for V4
superblocks filesystems:
for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++)
agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK);
For V4 filesystems, we don't have a agfl header structure, and so
XFS_AGFL_SIZE() returns an entire sector's worth of entries, which
we then index from an offset into the sector. Hence: buffer overrun.
This problem was introduced in 3.10 by commit 77c95bba ("xfs: add
CRC checks to the AGFL") which changed the AGFL structure but failed
to update the growfs code to handle the different structures.
Fix it by using the correct offset into the buffer for both V4 and
V5 filesystems.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For discard operation, we should return EINVAL if the given range length
is less than a block size, otherwise it will go through the file system
to discard data blocks as the end range might be evaluated to -1, e.g,
# fstrim -v -o 0 -l 100 /xfs7
/xfs7: 9811378176 bytes were trimmed
This issue can be triggered via xfstests/generic/288.
Also, it seems to get the request queue pointer via bdev_get_queue()
instead of the hard code pointer dereference is not a bad thing.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we allocate less than sizeof(struct attrlist) then we end up
corrupting memory or doing a ZERO_PTR_SIZE dereference.
This can only be triggered with CAP_SYS_ADMIN.
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The "verbose" argument to xfs_setsize_buftarg_flags() has been
unused since:
ffe37436 xfs: stop using the page cache to back the buffer cache
Remove it, and fold the function into xfs_setsize_buftarg()
now that there's no need for different types of callers.
Fix inconsistent comment spacing while we're at it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Here we have a performance fix for inode iversion, increased inode cluster size
for v5 superblock filesystems, a fix for error handling in
xfs_bmap_add_attrfork, and a MAINTAINERS update to add Dave.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJSjjbHAAoJENaLyazVq6ZO/l4QAIajqdOy56MDDCaE1ocNRMej
oPXqxMZpi+YAFRXIWQK/evjXjYE4hcCjiLI0tAKzQM0FGRHd1GgQQJvWKjvHBrLG
rlrHWDcKq+3bsJ6KIw+JvLnhsOxxKXbRovIG1PI4frOeFtS3DCtzMZ4FGBErh+BV
PkFjf5Lxe7VnegDL4eNpkAfSM/2/pEtn2gIMMj8eeKemTPAbDplMAk4UUxp18R7F
FCr6mOKETWthHdBgkLB1xA6OVGUuYcleWvluFc5PONJN1VPSutEHJaRw01lY1VLY
4COUt7MjLAqlAu24LTD1aNszhUlajYq0AL+nmd4gULZI2fpu+meUIGCHQG4BpVZl
ds9isn80SmKiLT4ZQCbJAv4XMEXn6p41+uxdKP6ZkYXso4zJmVw0TyGLg/ZOJpw0
9mNcaJG1s57ronN07dMCSMqsyNFLuLtX7+mVa5liO3sEkXv7hEK7EB9qojQ9Qn/p
xC2r4jrE0//xgcbOE+uKOyIad3L0IBM6TXuy58xVPi5l0dpM69z4LCyUGZ+L1G8x
0QhkA7NL3xI2tNgehzJBsBuxjtEePtm/jCIS1HfDSIRQZR3y+PxVEjgO4naS4vm2
xKwo5dBodsxgXeSMUY3miMuEX7ZQse+xVDK1q0Zk4VXZyC2+erNS5hxs313yzeLD
7X2ZESfIJaMrkLSKOVUe
=w0M3
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.13-rc1-2' of git://oss.sgi.com/xfs/xfs
Pull second xfs update from Ben Myers:
"There are a couple of patches that I wasn't quite sure about in time
for our initial 3.13 pull request, a bugfix, and an update to add Dave
to MAINTAINERS:
Here we have a performance fix for inode iversion, increased inode
cluster size for v5 superblock filesystems, a fix for error handling
in xfs_bmap_add_attrfork, and a MAINTAINERS update to add Dave"
* tag 'xfs-for-linus-v3.13-rc1-2' of git://oss.sgi.com/xfs/xfs:
xfs: open code inc_inode_iversion when logging an inode
xfs: increase inode cluster size for v5 filesystems
xfs: fix unlock in xfs_bmap_add_attrfork
xfs: update maintainers
Michael L Semon reported that generic/069 runtime increased on v5
superblocks by 100% compared to v4 superblocks. his perf-based
analysis pointed directly at the timestamp updates being done by the
write path in this workload. The append writers are doing 4-byte
writes, so there are lots of timestamp updates occurring.
The thing is, they aren't being triggered by timestamp changes -
they are being triggered by the inode change counter needing to be
updated. That is, every write(2) system call needs to bump the inode
version count, and it does that through the timestamp update
mechanism. Hence for v5 filesystems, test generic/069 is running 3
orders of magnitude more timestmap update transactions on v5
filesystems due to the fact it does a huge number of *4 byte*
write(2) calls.
This isn't a real world scenario we really need to address - anyone
doing such sequential IO should be using fwrite(3), not write(2).
i.e. fwrite(3) buffers the writes in userspace to minimise the
number of write(2) syscalls, and the problem goes away.
However, there is a small change we can make to improve the
situation - removing the expensive lock operation on the change
counter update. All inode version counter changes in XFS occur
under the ip->i_ilock during a transaction, and therefore we
don't actually need the spin lock that provides exclusive access to
it through inc_inode_iversion().
Hence avoid the lock and just open code the increment ourselves when
logging the inode.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
v5 filesystems use 512 byte inodes as a minimum, so read inodes in
clusters that are effectively half the size of a v4 filesystem with
256 byte inodes. For v5 fielsystems, scale the inode cluster size
with the size of the inode so that we keep a constant 32 inodes per
cluster ratio for all inode IO.
This only works if mkfs.xfs sets the inode alignment appropriately
for larger inode clusters, so this functionality is made conditional
on mkfs doing the right thing. xfs_repair needs to know about
the inode alignment changes, too.
Wall time:
create bulkstat find+stat ls -R unlink
v4 237s 161s 173s 201s 299s
v5 235s 163s 205s 31s 356s
patched 234s 160s 182s 29s 317s
System time:
create bulkstat find+stat ls -R unlink
v4 2601s 2490s 1653s 1656s 2960s
v5 2637s 2497s 1681s 20s 3216s
patched 2613s 2451s 1658s 20s 3007s
So, wall time same or down across the board, system time same or
down across the board, and cache hit rates all improve except for
the ls -R case which is a pure cold cache directory read workload
on v5 filesystems...
So, this patch removes most of the performance and CPU usage
differential between v4 and v5 filesystems on traversal related
workloads.
Note: while this patch is currently for v5 filesystems only, there
is no reason it can't be ported back to v4 filesystems. This hasn't
been done here because bringing the code back to v4 requires
forwards and backwards kernel compatibility testing. i.e. to
deterine if older kernels(*) do the right thing with larger inode
alignments but still only using 8k inode cluster sizes. None of this
testing and validation on v4 filesystems has been done, so for the
moment larger inode clusters is limited to v5 superblocks.
(*) a current default config v4 filesystem should mount just fine on
2.6.23 (when lazy-count support was introduced), and so if we change
the alignment emitted by mkfs without a feature bit then we have to
make sure it works properly on all kernels since 2.6.23. And if we
allow it to be changed when the lazy-count bit is not set, then it's
all kernels since v2 logs were introduced that need to be tested for
compatibility...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans_ijoin() activates the inode in a transaction and
also can specify which lock to free when the transaction is
committed or canceled.
xfs_bmap_add_attrfork call locks and adds the lock to the
transaction but also manually removes the lock. Change the
routine to not add the lock to the transaction and manually
remove lock on completion.
While here, clean up the xfs_trans_cancel flags and goto names.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
For 3.13-rc1 we have an eclectic assortment of bugfixes, cleanups, and
refactoring. Bugfixes that stand out are the fix for the AGF/AGI
deadlock, incore extent list fixes, verifier fixes for v4 superblocks
and growfs, and memory leaks. There are some asserts, warnings, and
strings that were cleaned up. There was further rearrangement of code
to make libxfs and the kernel sync up more easily, differences between
v2 and v3 directory code were abstracted using an ops vector,
xfs_inactive was reworked, and the preallocation/hole punching code was
refactored.
- simplify kmem_zone_zalloc
- add traces for AGF/AGI read ops
- add additional AIL traces
- fix xfs_remove AGF vs AGI deadlock
- fix the extent count of new incore extent page in the indirection array
- don't fail bad secondary superblocks verification on v4 filesystems
due to unzeroed bits after v4 fields
- fix possible NULL dereference in xlog_verify_iclog
- remove redundant assert in xfs_dir2_leafn_split
- prevent stack overflows from page cache allocation
- fix some sparse warnings
- fix directory block format verifier to check the leaf entry count
- abstract the differences in dir2/dir3 via an ops vector
- continue process of reorganization to make libxfs/kernel code merges easier
- refactor the preallocation and hole punching code
- fix for growfs and verifiers
- remove unnecessary scary corruption error when probing non-xfs filesystems
- remove extra newlines from strings passed to printk
- prevent deadlock trying to cover an active log
- rework xfs_inactive()
- add the inode directory type support to XFS_IOC_FSGEOM
- cleanup (remove) usage of is_bad_inode
- fix miscalculation in xfs_iext_realloc_direct which results in oversized
direct extent list
- remove unnecessary count arg to xfs_iomap_write_allocate
- fix memory leak in xlog_recover_add_to_trans
- check superblock instead of block magic to determine if dtype field
is present
- fix lockdep annotation due to project quotas
- fix regression in xfs_node_toosmall which can lead to incorrect directory
btree node collapse
- make log recovery verify filesystem uuid of recovering blocks
- fix XFS_IOC_FREE_EOFBLOCKS definition
- remove invalid assert in xfs_inode_free
- fix for AIL lock regression
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=XMd/
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.13-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"For 3.13-rc1 we have an eclectic assortment of bugfixes, cleanups, and
refactoring. Bugfixes that stand out are the fix for the AGF/AGI
deadlock, incore extent list fixes, verifier fixes for v4 superblocks
and growfs, and memory leaks. There are some asserts, warnings, and
strings that were cleaned up. There was further rearrangement of code
to make libxfs and the kernel sync up more easily, differences between
v2 and v3 directory code were abstracted using an ops vector,
xfs_inactive was reworked, and the preallocation/hole punching code
was refactored.
- simplify kmem_zone_zalloc
- add traces for AGF/AGI read ops
- add additional AIL traces
- fix xfs_remove AGF vs AGI deadlock
- fix the extent count of new incore extent page in the indirection
array
- don't fail bad secondary superblocks verification on v4 filesystems
due to unzeroed bits after v4 fields
- fix possible NULL dereference in xlog_verify_iclog
- remove redundant assert in xfs_dir2_leafn_split
- prevent stack overflows from page cache allocation
- fix some sparse warnings
- fix directory block format verifier to check the leaf entry count
- abstract the differences in dir2/dir3 via an ops vector
- continue process of reorganization to make libxfs/kernel code
merges easier
- refactor the preallocation and hole punching code
- fix for growfs and verifiers
- remove unnecessary scary corruption error when probing non-xfs
filesystems
- remove extra newlines from strings passed to printk
- prevent deadlock trying to cover an active log
- rework xfs_inactive()
- add the inode directory type support to XFS_IOC_FSGEOM
- cleanup (remove) usage of is_bad_inode
- fix miscalculation in xfs_iext_realloc_direct which results in
oversized direct extent list
- remove unnecessary count arg to xfs_iomap_write_allocate
- fix memory leak in xlog_recover_add_to_trans
- check superblock instead of block magic to determine if dtype field
is present
- fix lockdep annotation due to project quotas
- fix regression in xfs_node_toosmall which can lead to incorrect
directory btree node collapse
- make log recovery verify filesystem uuid of recovering blocks
- fix XFS_IOC_FREE_EOFBLOCKS definition
- remove invalid assert in xfs_inode_free
- fix for AIL lock regression"
* tag 'xfs-for-linus-v3.13-rc1' of git://oss.sgi.com/xfs/xfs: (49 commits)
xfs: simplify kmem_{zone_}zalloc
xfs: add tracepoints to AGF/AGI read operations
xfs: trace AIL manipulations
xfs: xfs_remove deadlocks due to inverted AGF vs AGI lock ordering
xfs: fix the extent count when allocating an new indirection array entry
xfs: be more forgiving of a v4 secondary sb w/ junk in v5 fields
xfs: fix possible NULL dereference in xlog_verify_iclog
xfs:xfs_dir2_node.c: pointer use before check for null
xfs: prevent stack overflows from page cache allocation
xfs: fix static and extern sparse warnings
xfs: validity check the directory block leaf entry count
xfs: make dir2 ftype offset pointers explicit
xfs: convert directory vector functions to constants
xfs: convert directory vector functions to constants
xfs: vectorise encoding/decoding directory headers
xfs: vectorise DA btree operations
xfs: vectorise directory leaf operations
xfs: vectorise directory data operations part 2
xfs: vectorise directory data operations
xfs: vectorise remaining shortform dir2 ops
...
When there are processes heavily creating small files while sync(2) is
running, it can easily happen that quite some new files are created
between WB_SYNC_NONE and WB_SYNC_ALL pass of sync(2). That can happen
especially if there are several busy filesystems (remember that sync
traverses filesystems sequentially and waits in WB_SYNC_ALL phase on one
fs before starting it on another fs). Because WB_SYNC_ALL pass is slow
(e.g. causes a transaction commit and cache flush for each inode in
ext3), resulting sync(2) times are rather large.
The following script reproduces the problem:
function run_writers
{
for (( i = 0; i < 10; i++ )); do
mkdir $1/dir$i
for (( j = 0; j < 40000; j++ )); do
dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
done &
done
}
for dir in "$@"; do
run_writers $dir
done
sleep 40
time sync
Fix the problem by disregarding inodes dirtied after sync(2) was called
in the WB_SYNC_ALL pass. To allow for this, sync_inodes_sb() now takes
a time stamp when sync has started which is used for setting up work for
flusher threads.
To give some numbers, when above script is run on two ext4 filesystems
on simple SATA drive, the average sync time from 10 runs is 267.549
seconds with standard deviation 104.799426. With the patched kernel,
the average sync time from 10 runs is 2.995 seconds with standard
deviation 0.096.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce flag KM_ZERO which is used to alloc zeroed entry, and convert
kmem_{zone_}zalloc to call kmem_{zone_}alloc() with KM_ZERO directly,
in order to avoid the setting to zero step.
And following Dave's suggestion, make kmem_{zone_}zalloc static inline
into kmem.h as they're now just a simple wrapper.
V2:
Make kmem_{zone_}zalloc static inline into kmem.h as Dave suggested.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To help track down AGI/AGF lock ordering issues, I added these
tracepoints to tell us when an AGI or AGF is read and locked. With
these we can now determine if the lock ordering goes wrong from
tracing captures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
I debugging a log tail issue on a RHEL6 kernel, I added these trace
points to trace log items being added, moved and removed in the AIL
and how that affected the log tail LSN that was written to the log.
They were very helpful in that they immediately identified the cause
of the problem being seen. Hence I'd like to always have them
available for use.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Removing an inode from the namespace involves removing the directory
entry and dropping the link count on the inode. Removing the
directory entry can result in locking an AGF (directory blocks were
freed) and removing a link count can result in placing the inode on
an unlinked list which results in locking an AGI.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI.
Similarly, freeing the inode removes the inode from the unlinked
list, requiring that we lock the AGI first, and then freeing the
inode can result in an inode chunk being freed and hence freeing
disk space requiring that we lock an AGF.
Hence the ordering that is imposed by other parts of the code is AGI
before AGF. This means we cannot remove the directory entry before
we drop the inode reference count and put it on the unlinked list as
this results in a lock order of AGF then AGI, and this can deadlock
against inode allocation and freeing. Therefore we must drop the
link counts before we remove the directory entry.
This is still safe from a transactional point of view - it is not
until we get to xfs_bmap_finish() that we have the possibility of
multiple transactions in this operation. Hence as long as we remove
the directory entry and drop the link count in the first transaction
of the remove operation, there are no transactional constraints on
the ordering here.
Change the ordering of the operations in the xfs_remove() function
to align the ordering of AGI and AGF locking to match that of the
rest of the code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
At xfs_iext_add(), if extent(s) are being appended to the last page in
the indirection array and the new extent(s) don't fit in the page, the
number of extents(erp->er_extcount) in a new allocated entry should be
the minimum value between count and XFS_LINEAR_EXTS, instead of count.
For now, there is no existing test case can demonstrates a problem with
the er_extcount being set incorrectly here, but it obviously like a bug.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Today, if xfs_sb_read_verify encounters a v4 superblock
with junk past v4 fields which includes data in sb_crc,
it will be treated as a failing checksum and a significant
corruption.
There are known prior bugs which leave junk at the end
of the V4 superblock; we don't need to actually fail the
verification in this case if other checks pan out ok.
So if this is a secondary superblock, and the primary
superblock doesn't indicate that this is a V5 filesystem,
don't treat this as an actual checksum failure.
We should probably check the garbage condition as
we do in xfs_repair, and possibly warn about it
or self-heal, but that's a different scope of work.
Stable folks: This can go back to v3.10, which is what
introduced the sb CRC checking that is tripped up by old,
stale, incorrect V4 superblocks w/ unzeroed bits.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In xlog_verify_iclog a debug check of the incore log buffers prints an
error if icptr is null and then goes on to dereference the pointer
regardless. Convert this to an assert so that the intention is clear.
This was reported by Coverty.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
ASSERT on args takes place after args dereference.
This assertion is redundant since we are going to panic anyway.
Found by Linux Driver Verification project (linuxtesting.org) -
PVS-Studio analyzer.
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Page cache allocation doesn't always go through ->begin_write and
hence we don't always get the opportunity to set the allocation
context to GFP_NOFS. Failing to do this means we open up the direct
relcaim stack to recurse into the filesystem and consume a
significant amount of stack.
On RHEL6.4 kernels we are seeing ra_submit() and
generic_file_splice_read() from an nfsd context recursing into the
filesystem via the inode cache shrinker and evicting inodes. This is
causing truncation to be run (e.g EOF block freeing) and causing
bmap btree block merges and free space btree block splits to occur.
These btree manipulations are occurring with the call chain already
30 functions deep and hence there is not enough stack space to
complete such operations.
To avoid these specific overruns, we need to prevent the page cache
allocation from recursing via direct reclaim. We can do that because
the allocation functions take the allocation context from that which
is stored in the mapping for the inode. We don't set that right now,
so the default is GFP_HIGHUSER_MOVABLE, which is effectively a
GFP_KERNEL context. We need it to be the equivalent of GFP_NOFS, so
when we initialise an inode, set the mapping gfp mask appropriately.
This makes the use of AOP_FLAG_NOFS redundant from other parts of
the XFS IO path, so get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The kbuild test robot indicated that there were some new sparse
warnings in fs/xfs/xfs_dquot_buf.c. Actually, there were a lot more
that is wasn't warning about, so fix them all up.
Reported-by: kbuild test robot
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The directory block format verifier fails to check that the leaf
entry count is in a valid range, and so if it is corrupted then it
can lead to derefencing a pointer outside the block buffer. While we
can't exactly validate the count without first walking the directory
block, we can ensure the count lands in the valid area within the
directory block and hence avoid out-of-block references.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Rather than hiding the ftype field size accounting inside the dirent
padding for the ".." and first entry offset functions for v2
directory formats, add explicit functions that calculate it
correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Many of the vectorised function calls now take no parameters and
return a constant value. There is no reason for these to be vectored
functions, so convert them to constants
Binary sizes:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7
791701 96802 1096 889599 d92ff fs/xfs/xfs.o.p8
791205 96802 1096 889103 d91cf fs/xfs/xfs.o.p9
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Next step in the vectorisation process is the directory free block
encode/decode operations. There are relatively few of these, though
there are quite a number of calls to them.
Binary sizes:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7
791701 96802 1096 889599 d92ff fs/xfs/xfs.o.p8
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Conversion from on-disk structures to in-core header structures
currently relies on magic number checks. If the magic number is
wrong, but one of the supported values, we do the wrong thing with
the encode/decode operation. Split these functions so that there are
discrete operations for the specific directory format we are
handling.
In doing this, move all the header encode/decode functions to
xfs_da_format.c as they are directly manipulating the on-disk
format. It should be noted that all the growth in binary size is
from xfs_da_format.c - the rest of the code actaully shrinks.
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The remaining non-vectorised code for the directory structure is the
node format blocks. This is shared with the attribute tree, and so
is slightly more complex to vectorise.
Introduce a "non-directory" directory ops structure that is attached
to all non-directory inodes so that attribute operations can be
vectorised for all inodes.
Once we do this, we can vectorise all the da btree operations.
Because this patch adds more infrastructure than it removes the
binary size does not decrease:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Next step in the vectorisation process is the leaf block
encode/decode operations. Most of the operations on leaves are
handled by the data block vectors, so there are relatively few of
them here.
Because of all the shuffling of code and having to pass more state
to some functions, this patch doesn't directly reduce the size of
the binary. It does open up many more opportunities for factoring
and optimisation, however.
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Convert the rest of the directory data block encode/decode
operations to vector format.
This further reduces the size of the built binary:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Following from the initial patches to vectorise the shortform
directory encode/decode operations, convert half the data block
operations to use the vector. The rest will be done in a second
patch.
This further reduces the size of the built binary:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Following from the initial patch to introduce the directory
operations vector, convert the rest of the shortform directory
operations to use vectored ops rather than superblock feature
checks. This further reduces the size of the built binary:
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Lots of the dir code now goes through switches to determine what is
the correct on-disk format to parse. It generally involves a
"xfs_sbversion_hasfoo" check, deferencing the superblock version and
feature fields and hence touching several cache lines per operation
in the process. Some operations do multiple checks because they nest
conditional operations and they don't pass the information in a
direct fashion between each other.
Hence, add an ops vector to the xfs_inode structure that is
configured when the inode is initialised to point to all the correct
decode and encoding operations. This will significantly reduce the
branchiness and cacheline footprint of the directory object decoding
and encoding.
This is the first patch in a series of conversion patches. It will
introduce the ops structure, the setup of it and add the first
operation to the vector. Subsequent patches will convert directory
ops one at a time to keep the changes simple and obvious.
Just this patch shows the benefit of such an approach on code size.
Just converting the two shortform dir operations as this patch does
decreases the built binary size by ~1500 bytes:
$ size fs/xfs/xfs.o.orig fs/xfs/xfs.o.p1
text data bss dec hex filename
794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig
792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1
$
That's a significant decrease in the instruction cache footprint of
the directory code for such a simple change, and indicates that this
approach is definitely worth pursuing further.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_rtalloc.c is partially shared with userspace. Split the file up
into two parts - one that is kernel private and the other which is
wholly shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.
Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.
The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We don't do callbacks at transaction commit time, no do we have any
infrastructure to set up or run such callbacks, so remove the
variables and typedefs for these operations. If we ever need to add
callbacks, we can reintroduce the variables at that time.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Parts of userspace want to be able to read and modify dquot buffers
(e.g. xfs_db) so we need to split out the reading and writing of
these buffers so it is easy to shared code with libxfs in userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on-disk format definitions for the directory and attribute
structures are spread across 3 header files right now, only one of
which is dedicated to defining on-disk structures and their
manipulation (xfs_dir2_format.h). Pull all the format definitions
into a single header file - xfs_da_format.h - and switch all the
code over to point at that.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
All of the buffer operations structures are needed to be exported
for xfs_db, so move them all to a common location rather than
spreading them all over the place. They are verifying the on-disk
format, so while xfs_format.h might be a good place, it is not part
of the on disk format.
Hence we need to create a new header file that we centralise these
related definitions. Start by moving the bffer operations
structures, and then also move all the other definitions that have
crept into xfs_log_format.h and xfs_format.h as there was no other
shared header file to put them in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that only one caller of xfs_change_file_space is left it can be merged
into said caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Call xfs_alloc_file_space or xfs_free_file_space directly from
xfs_file_fallocate instead of going through xfs_change_file_space.
This simplified the code by removing the unessecary marshalling of the
arguments into an xfs_flock64_t structure and allows removing checks that
are already done in the VFS code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently fallocate always holds the iolock when calling into
xfs_change_file_space, while the ioctl path lets some of the lower level
functions take it, but leave it out in others.
This patch makes sure the ioctl path also always holds the iolock and
thus introduces consistent locking for the preallocation operations while
simplifying the code and allowing to kill the now unused XFS_ATTR_NOLOCK
flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no reason to conditionally take the iolock inside xfs_setattr_size
when we can let the caller handle it unconditionally, which just incrases
the lock hold time for the case where it was previously taken internally
by a few instructions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When xfs_growfs_data_private() is updating backup superblocks,
it bails out on the first error encountered, whether reading or
writing:
* If we get an error writing out the alternate superblocks,
* just issue a warning and continue. The real work is
* already done and committed.
This can cause a problem later during repair, because repair
looks at all superblocks, and picks the most prevalent one
as correct. If we bail out early in the backup superblock
loop, we can end up with more "bad" matching superblocks than
good, and a post-growfs repair may revert the filesystem to
the old geometry.
With the combination of superblock verifiers and old bugs,
we're more likely to encounter read errors due to verification.
And perhaps even worse, we don't even properly write any of the
newly-added superblocks in the new AGs.
Even with this change, growfs will still say:
xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Structure needs cleaning
data blocks changed from 319815680 to 335216640
which might be confusing to the user, but it at least communicates
that something has gone wrong, and dmesg will probably highlight
the need for an xfs_repair.
And this is still best-effort; if verifiers fail on more than
half the backup supers, they may still "win" - but that's probably
best left to repair to more gracefully handle by doing its own
strict verification as part of the backup super "voting."
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we get EWRONGFS due to probing of non-xfs filesystems,
there's no need to issue the scary corruption error and backtrace.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
__xfs_printk adds its own "\n". Having it in the original string
leads to unintentional blank lines from these messages.
Most format strings have no newline, but a few do, leading to
i.e.:
[ 7347.119911] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05
[ 7347.119911]
[ 7347.119919] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05
[ 7347.119919]
Fix them all.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Recent analysis of a deadlocked XFS filesystem from a kernel
crash dump indicated that the filesystem was stuck waiting for log
space. The short story of the hang on the RHEL6 kernel is this:
- the tail of the log is pinned by an inode
- the inode has been pushed by the xfsaild
- the inode has been flushed to it's backing buffer and is
currently flush locked and hence waiting for backing
buffer IO to complete and remove it from the AIL
- the backing buffer is marked for write - it is on the
delayed write queue
- the inode buffer has been modified directly and logged
recently due to unlinked inode list modification
- the backing buffer is pinned in memory as it is in the
active CIL context.
- the xfsbufd won't start buffer writeback because it is
pinned
- xfssyncd won't force the log because it sees the log as
needing to be covered and hence wants to issue a dummy
transaction to move the log covering state machine along.
Hence there is no trigger to force the CIL to the log and hence
unpin the inode buffer and therefore complete the inode IO, remove
it from the AIL and hence move the tail of the log along, allowing
transactions to start again.
Mainline kernels also have the same deadlock, though the signature
is slightly different - the inode buffer never reaches the delayed
write lists because xfs_buf_item_push() sees that it is pinned and
hence never adds it to the delayed write list that the xfsaild
flushes.
There are two possible solutions here. The first is to simply force
the log before trying to cover the log and so ensure that the CIL is
emptied before we try to reserve space for the dummy transaction in
the xfs_log_worker(). While this might work most of the time, it is
still racy and is no guarantee that we don't get stuck in
xfs_trans_reserve waiting for log space to come free. Hence it's not
the best way to solve the problem.
The second solution is to modify xfs_log_need_covered() to be aware
of the CIL. We only should be attempting to cover the log if there
is no current activity in the log - covering the log is the process
of ensuring that the head and tail in the log on disk are identical
(i.e. the log is clean and at idle). Hence, by definition, if there
are items in the CIL then the log is not at idle and so we don't
need to attempt to cover it.
When we don't need to cover the log because it is active or idle, we
issue a log force from xfs_log_worker() - if the log is idle, then
this does nothing. However, if the log is active due to there being
items in the CIL, it will force the items in the CIL to the log and
unpin them.
In the case of the above deadlock scenario, instead of
xfs_log_worker() getting stuck in xfs_trans_reserve() attempting to
cover the log, it will instead force the log, thereby unpinning the
inode buffer, allowing IO to be issued and complete and hence
removing the inode that was pinning the tail of the log from the
AIL. At that point, everything will start moving along again. i.e.
the xfs_log_worker turns back into a watchdog that can alleviate
deadlocks based around pinned items that prevent the tail of the log
from being moved...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xfs_inactive() return value is meaningless. Turn xfs_inactive()
into a void function and clean up the error handling appropriately.
Kill the VN_INACTIVE_[NO]CACHE directives as they are not relevant
to Linux.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Push the inode free work performed during xfs_inactive() down into
a new xfs_inactive_ifree() helper. This clears xfs_inactive() from
all inode locking and transaction management more directly
associated with freeing the inode xattrs, extents and the inode
itself.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Create the new xfs_inactive_truncate() function to handle the
truncate portion of xfs_inactive(). Push the locking and
transaction management into the new function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Push down the transaction management for remote symlinks from
xfs_inactive() down to xfs_inactive_symlink_rmt(). The latter is
cleaned up to avoid transaction management intended for the
calling context (i.e., trans duplication, reservation, item
attachment).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add the inode type directory type support to XFS_IOC_FSGEOM
so that xfs_repair/xfs_info knows if the superblock v4 filesystem
enabled the feature.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This fixes a build failure caused by calling the free() function which
does not exist in the Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit aaaae98022)
Free the memory in error path of xlog_recover_add_to_trans().
Normally this memory is freed in recovery pass2, but is leaked
in the error path.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 519ccb81ac)
The determination of whether a directory entry contains a dtype
field originally was dependent on the filesystem having CRCs
enabled. This meant that the format for dtype beign enabled could be
determined by checking the directory block magic number rather than
doing a feature bit check. This was useful in that it meant that we
didn't need to pass a struct xfs_mount around to functions that
were already supplied with a directory block header.
Unfortunately, the introduction of dtype fields into the v4
structure via a feature bit meant this "use the directory block
magic number" method of discriminating the dirent entry sizes is
broken. Hence we need to convert the places that use magic number
checks to use feature bit checks so that they work correctly and not
by chance.
The current code works on v4 filesystems only because the dirent
size roundup covers the extra byte needed by the dtype field in the
places where this problem occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 367993e7c6)
Michael Semon reported that xfs/299 generated this lockdep warning:
=============================================
[ INFO: possible recursive locking detected ]
3.12.0-rc2+ #2 Not tainted
---------------------------------------------
touch/21072 is trying to acquire lock:
(&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
but task is already holding lock:
(&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&xfs_dquot_other_class);
lock(&xfs_dquot_other_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by touch/21072:
#0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e
#1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40
#2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35
#3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1
#4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f
#5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
#6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
The lockdep annotation for dquot lock nesting only understands
locking for user and "other" dquots, not user, group and quota
dquots. Fix the annotations to match the locking heirarchy we now
have.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit f112a04971)
XFS never calls mark_inode_bad or iget_failed, so it will never see a
bad inode. Remove all checks for is_bad_inode because they are
unnecessary.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
At xfs_iext_realloc_direct(), the new_size is changed by adding
if_bytes if originally the extent records are stored at the inline
extent buffer, and we have to switch from it to a direct extent
list for those new allocated extents, this is wrong. e.g,
Create a file with three extents which was showing as following,
xfs_io -f -c "truncate 100m" /xfs/testme
for i in $(seq 0 5 10); do
offset=$(($i * $((1 << 20))))
xfs_io -c "pwrite $offset 1m" /xfs/testme
done
Inline
------
irec: if_bytes bytes_diff new_size
1st 0 16 16
2nd 16 16 32
Switching
--------- rnew_size
3rd 32 16 48 + 32 = 80 roundup=128
In this case, the desired value of new_size should be 48, and then
it will be roundup to 64 and be assigned to rnew_size.
However, this issue has been covered by resetting the if_bytes to
the new_size which is calculated at the begnning of xfs_iext_add()
before leaving out this function, and in turn make the rnew_size
correctly again. Hence, this can not be detected via xfstestes.
This patch fix above problem and revise the new_size comments at
xfs_iext_realloc_direct() to make it more readable. Also, fix the
comments while switching from the inline extent buffer to a direct
extent list to reflect this change.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Get rid of function variable count from xfs_iomap_write_allocate() as
it is unused.
Additionally, checkpatch warn me of the following for this change:
WARNING: extern prototypes should be avoided in .h files
+extern int xfs_iomap_write_allocate(struct xfs_inode *, xfs_off_t,
So this patch also remove all extern function prototypes at xfs_iomap.h
to suppress it to make this code style in consistent manner in this file.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This fixes a build failure caused by calling the free() function which
does not exist in the Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Free the memory in error path of xlog_recover_add_to_trans().
Normally this memory is freed in recovery pass2, but is leaked
in the error path.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The determination of whether a directory entry contains a dtype
field originally was dependent on the filesystem having CRCs
enabled. This meant that the format for dtype beign enabled could be
determined by checking the directory block magic number rather than
doing a feature bit check. This was useful in that it meant that we
didn't need to pass a struct xfs_mount around to functions that
were already supplied with a directory block header.
Unfortunately, the introduction of dtype fields into the v4
structure via a feature bit meant this "use the directory block
magic number" method of discriminating the dirent entry sizes is
broken. Hence we need to convert the places that use magic number
checks to use feature bit checks so that they work correctly and not
by chance.
The current code works on v4 filesystems only because the dirent
size roundup covers the extra byte needed by the dtype field in the
places where this problem occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Michael Semon reported that xfs/299 generated this lockdep warning:
=============================================
[ INFO: possible recursive locking detected ]
3.12.0-rc2+ #2 Not tainted
---------------------------------------------
touch/21072 is trying to acquire lock:
(&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
but task is already holding lock:
(&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&xfs_dquot_other_class);
lock(&xfs_dquot_other_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by touch/21072:
#0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e
#1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40
#2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35
#3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1
#4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f
#5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
#6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
The lockdep annotation for dquot lock nesting only understands
locking for user and "other" dquots, not user, group and quota
dquots. Fix the annotations to match the locking heirarchy we now
have.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commit f5ea1100 cleans up the disk to host conversions for
node directory entries, but because a variable is reused in
xfs_node_toosmall() the next node is not correctly found.
If the original node is small enough (<= 3/8 of the node size),
this change may incorrectly cause a node collapse when it should
not. That will cause an assert in xfstest generic/319:
Assertion failed: first <= last && last < BBTOB(bp->b_length),
file: /root/newest/xfs/fs/xfs/xfs_trans_buf.c, line: 569
Keep the original node header to get the correct forward node.
(When a node is considered for a merge with a sibling, it overwrites the
sibling pointers of the original incore nodehdr with the sibling's
pointers. This leads to loop considering the original node as a merge
candidate with itself in the second pass, and so it incorrectly
determines a merge should occur.)
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
[v3: added Dave Chinner's (slightly modified) suggestion to the commit header,
cleaned up whitespace. -bpm]
After a fair number of xfstests runs, xfs/182 started to fail
regularly with a corrupted directory - a directory read verifier was
failing after recovery because it found a block with a XARM magic
number (remote attribute block) rather than a directory data block.
The first time I saw this repeated failure I did /something/ and the
problem went away, so I was never able to find the underlying
problem. Test xfs/182 failed again today, and I found the root
cause before I did /something else/ that made it go away.
Tracing indicated that the block in question was being correctly
logged, the log was being flushed by sync, but the buffer was not
being written back before the shutdown occurred. Tracing also
indicated that log recovery was also reading the block, but then
never writing it before log recovery invalidated the cache,
indicating that it was not modified by log recovery.
More detailed analysis of the corpse indicated that the filesystem
had a uuid of "a4131074-1872-4cac-9323-2229adbcb886" but the XARM
block had a uuid of "8f32f043-c3c9-e7f8-f947-4e7f989c05d3", which
indicated it was a block from an older filesystem. The reason that
log recovery didn't replay it was that the LSN in the XARM block was
larger than the LSN of the transaction being replayed, and so the
block was not overwritten by log recovery.
Hence, log recovery cant blindly trust the magic number and LSN in
the block - it must verify that it belongs to the filesystem being
recovered before using the LSN. i.e. if the UUIDs don't match, we
need to unconditionally recovery the change held in the log.
This patch was first tested on a block device that was repeatedly
causing xfs/182 to fail with the same failure on the same block with
the same directory read corruption signature (i.e. XARM block). It
did not fail, and hasn't failed since.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
It uses a kernel internal structure in it's definition rather than
the user visible structure that is passed to the ioctl.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we free an inode, we do so via RCU. As an RCU lookup can occur
at any time before we free an inode, and that lookup takes the inode
flags lock, we cannot safely assert that the flags lock is not held
just before marking it dead and running call_rcu() to free the
inode.
We check on allocation of a new inode structre that the lock is not
held, so we still have protection against locks being leaked and
hence not correctly initialised when allocated out of the slab.
Hence just remove the assert...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Regression introduced by commit 46f9d2e ("xfs: aborted buf items can
be in the AIL") which fails to lock the AIL before removing the
item. Spinlock debugging throws a warning about this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Here we have defrag support for v5 superblock, a number of bugfixes and
a cleanup or two.
- defrag support for CRC filesystems
- fix endian worning in xlog_recover_get_buf_lsn
- fixes for sparse warnings
- fix for assert in xfs_dir3_leaf_hdr_from_disk
- fix for log recovery of remote symlinks
- fix for log recovery of btree root splits
- fixes formemory allocation failures with ACLs
- fix for assert in xfs_buf_item_relse
- fix for assert in xfs_inode_buf_verify
- fix an assignment in an assert that should be a test in
xfs_bmbt_change_owner
- remove dead code in xlog_recover_inode_pass2
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJSMjQUAAoJENaLyazVq6ZOu2IP/1OHZYy+Bkmj0tO9pdsdEa4s
w4FEBPsQePMJPjwdN693rKpW1exZue5sUmPMErH3ENzc2DPAwpUAlc9XAIohtdFx
rTqrz2q+qTfZTq8oYBIA/RCOifJ2cHWN8tDYZPJpp5wceV7CRGYQeR1foiudE3ZH
QDIPXioy8P9IkfGaXCtr/iWf9kycMO2lgNTNfdL6qtwX99HCqHZanTlsWx1BIYGQ
Fa5TaOsXis6idPMCFMuEC15iEwA+YXc0HmXuHkMFLj+9mwFc4h/Aq65bwUkYZLmy
+T1Wo/uQ/21rl6im/rWqgCh6fFS8NJQp8NIJeCIyihUEHbarfPyJIJRJjoP457YO
cv8OkixCkt4zX6CkTxaL5ZFEBW9FYbRb13Gg96J6hb4WfdAFMtQg7FAjThSU/+Qr
HwjaAso3GXimEaZD1C3c0TtZEQ0x9E6pENVI7/ewB1I0p92p7GJBMq4C7CTAYThV
5zhdcOnViSrJTJvVQxm+gfOYzubkWWiVmbVku3RCO6//kvPBOvJ9juSYsl0mKeRu
v2DZZB3AYJE/qnbYfZBlktX9obE6k+keKF6w8Eiufr2IqwJaqfaM4h9eogzAwTJA
vyXKeLxUEmgHuqivFSZjw3sEK6sY654GCMMTP+2IpD19vlAIioYXdgp0ZbkkdiE3
6twrzdFZAr1zy80xlM8W
=2Uq6
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.12-rc1-2' of git://oss.sgi.com/xfs/xfs
Pull xfs update #2 from Ben Myers:
"Here we have defrag support for v5 superblock, a number of bugfixes
and a cleanup or two.
- defrag support for CRC filesystems
- fix endian worning in xlog_recover_get_buf_lsn
- fixes for sparse warnings
- fix for assert in xfs_dir3_leaf_hdr_from_disk
- fix for log recovery of remote symlinks
- fix for log recovery of btree root splits
- fixes formemory allocation failures with ACLs
- fix for assert in xfs_buf_item_relse
- fix for assert in xfs_inode_buf_verify
- fix an assignment in an assert that should be a test in
xfs_bmbt_change_owner
- remove dead code in xlog_recover_inode_pass2"
* tag 'xfs-for-linus-v3.12-rc1-2' of git://oss.sgi.com/xfs/xfs:
xfs: remove dead code from xlog_recover_inode_pass2
xfs: = vs == typo in ASSERT()
xfs: don't assert fail on bad inode numbers
xfs: aborted buf items can be in the AIL.
xfs: factor all the kmalloc-or-vmalloc fallback allocations
xfs: fix memory allocation failures with ACLs
xfs: ensure we copy buffer type in da btree root splits
xfs: set remote symlink buffer type for recovery
xfs: recovery of swap extents operations for CRC filesystems
xfs: swap extents operations for CRC filesystems
xfs: check magic numbers in dir3 leaf verifier first
xfs: fix some minor sparse warnings
xfs: fix endian warning in xlog_recover_get_buf_lsn()
Merge more patches from Andrew Morton:
"The rest of MM. Plus one misc cleanup"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
mm/Kconfig: add MMU dependency for MIGRATION.
kernel: replace strict_strto*() with kstrto*()
mm, thp: count thp_fault_fallback anytime thp fault fails
thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
thp: do_huge_pmd_anonymous_page() cleanup
thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
mm: cleanup add_to_page_cache_locked()
thp: account anon transparent huge pages into NR_ANON_PAGES
truncate: drop 'oldsize' truncate_pagecache() parameter
mm: make lru_add_drain_all() selective
memcg: document cgroup dirty/writeback memory statistics
memcg: add per cgroup writeback pages accounting
memcg: check for proper lock held in mem_cgroup_update_page_stat
memcg: remove MEMCG_NR_FILE_MAPPED
memcg: reduce function dereference
memcg: avoid overflow caused by PAGE_ALIGN
memcg: rename RESOURCE_MAX to RES_COUNTER_MAX
memcg: correct RESOURCE_MAX to ULLONG_MAX
mm: memcg: do not trap chargers with full callstack on OOM
mm: memcg: rework and document OOM waiting and wakeup
...
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression"). Let's drop it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Additional code in the error handler of xlog_recover_inode_pass2()
results in the following error:
static checker warning: "fs/xfs/xfs_log_recover.c:2999
xlog_recover_inode_pass2()
info: ignoring unreachable code."
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com
Signed-off-by: Ben Myers <bpm@sgi.com>
There is a '=' vs '==' typo so the ASSERT()s are always true.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This patch adds the missing call to list_lru_destroy (spotted by Li Zhong)
and moves the deletion to after the shrinker is unregistered, as correctly
spotted by Dave
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently use a compile-time constant to size the node array for the
list_lru structure. Due to this, we don't need to allocate any memory at
initialization time. But as a consequence, the structures that contain
embedded list_lru lists can become way too big (the superblock for
instance contains two of them).
This patch aims at ameliorating this situation by dynamically allocating
the node arrays with the firmware provided nr_node_ids.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The new LRU list isolation code in xfs_qm_dquot_isolate() isn't
completely up to date. Firstly, it needs conversion to return enum
lru_status values, not raw numbers. Secondly - most importantly - it
fails to unlock the dquot and relock the LRU in the LRU_RETRY path.
This leads to deadlocks in xfstests generic/232. Fix them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fix warnings
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the XFS dquot lru to use the list_lru construct and convert the
shrinker to being node aware.
[glommer@openvz.org: edited for conflicts + warning fixes]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In converting the buffer lru lists to use the generic code, the locking
for marking the buffers as on the dispose list was lost. This results in
confusion in LRU buffer tracking and acocunting, resulting in reference
counts being mucked up and filesystem beig unmountable.
To fix this, introduce an internal buffer spinlock to protect the state
field that holds the dispose list information. Because there is now
locking needed around xfs_buf_lru_add/del, and they are used in exactly
one place each two lines apart, get rid of the wrappers and code the logic
directly in place.
Further, the LRU emptying code used on unmount is less than optimal.
Convert it to use a dispose list as per a normal shrinker walk, and repeat
the walk that fills the dispose list until the LRU is empty. Thi avoids
needing to drop and regain the LRU lock for every item being freed, and
allows the same logic as the shrinker isolate call to be used. Simpler,
easier to understand.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fix warnings
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the buftarg LRU to use the new generic LRU list and take advantage
of the functionality it supplies to make the buffer cache shrinker node
aware.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that the shrinker is passing a node in the scan control structure, we
can pass this to the the generic LRU list code to isolate reclaim to the
lists on matching nodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert superblock shrinker to use the new count/scan API, and propagate
the API changes through to the filesystem callouts. The filesystem
callouts already use a count/scan API, so it's just changing counters to
longs to match the VM API.
This requires the dentry and inode shrinker callouts to be converted to
the count/scan API. This is mainly a mechanical change.
[glommer@openvz.org: use mult_frac for fractional proportions, build fixes]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The sysctl knob sysctl_vfs_cache_pressure is used to determine which
percentage of the shrinkable objects in our cache we should actively try
to shrink.
It works great in situations in which we have many objects (at least more
than 100), because the aproximation errors will be negligible. But if
this is not the case, specially when total_objects < 100, we may end up
concluding that we have no objects at all (total / 100 = 0, if total <
100).
This is certainly not the biggest killer in the world, but may matter in
very low kernel memory situations.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let the inode verifier do it's work by returning an error when we
fail to find correct magic numbers in an inode buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Saw this on generic/270 after a DQALLOC transaction overrun
shutdown:
XFS: Assertion failed: !(bip->bli_item.li_flags & XFS_LI_IN_AIL), file: fs/xfs/xfs_buf_item.c, line: 952
.....
xfs_buf_item_relse+0x4f/0xd0
xfs_buf_item_unlock+0x1b4/0x1e0
xfs_trans_free_items+0x7d/0xb0
xfs_trans_cancel+0x13c/0x1b0
xfs_symlink+0x37e/0xa60
....
When a transaction abort occured.
If we are aborting a transaction and trigger this code path, then
the item may be dirty. If the item is dirty, then it may be in the
AIL. Hence if we are aborting, we need to check if the item is in
the AIL and remove it before freeing it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We have quite a few places now where we do:
x = kmem_zalloc(large size)
if (!x)
x = kmem_zalloc_large(large size)
and do a similar dance when freeing the memory. kmem_free() already
does the correct freeing dance, and kmem_zalloc_large() is only ever
called in these constructs, so just factor it all into
kmem_zalloc_large() and kmem_free().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Ever since increasing the number of supported ACLs from 25 to as
many as can fit in an xattr, there have been reports of order 4
memory allocations failing in the ACL code. Fix it in the same way
we've fixed all the xattr read/write code that has the same problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When splitting the root of the da btree, we shuffled data between
buffers and the structures that track them. At one point, we copy
data and state from one buffer to another, including the ops
associated with the buffer. When we do this, we also need to copy
the buffer type associated with the buf log item so that the buffer
is logged correctly. If we don't do that, log recovery won't
recognise it and hence it won't recalculate the CRC on the buffer
after recovery. This leads to a directory block that can't be read
after recovery has run.
Found by inspection after finding the same problem with remote
symlink buffers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The logging of a remote symlink block does not set the buffer type
being logged, and hence on recovery the type of buffer is not
recognised and hence CRCs are not calculated after replay. This
results in log recoery throwing:
XFS (vdc): Unknown buffer type 0
errors, and subsequent reads of the symlink failing CRC
verification. Found via fsstress + godown.
Reported by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
This is the recovery side of the btree block owner change operation
performed by swapext on CRC enabled filesystems. We detect that an
owner change is needed by the flag that has been placed on the inode
log format flag field. Because the inode recovery is being replayed
after the buffers that make up the BMBT in the given checkpoint, we
can walk all the buffers and directly modify them when we see the
flag set on an inode.
Because the inode can be relogged and hence present in multiple
chekpoints with the "change owner" flag set, we could do multiple
passes across the inode to do this change. While this isn't optimal,
we can't directly ignore the flag as there may be multiple
independent swap extent operations being replayed on the same inode
in different checkpoints so we can't ignore them.
Further, because the owner change operation uses ordered buffers, we
might have buffers that are newer on disk than the current
checkpoint and so already have the owner changed in them. Hence we
cannot just peek at a buffer in the tree and check that it has the
correct owner and assume that the change was completed.
So, for the moment just brute force the owner change every time we
see an inode with the flag set. Note that we have to be careful here
because the owner of the buffers may point to either the old owner
or the new owner. Currently the verifier can't verify the owner
directly, so there is no failure case here right now. If we verify
the owner exactly in future, then we'll have to take this into
account.
This was tested in terms of normal operation via xfstests - all of
the fsr tests now pass without failure. however, we really need to
modify xfs/227 to stress v3 inodes correctly to ensure we fully
cover this case for v5 filesystems.
In terms of recovery testing, I used a hacked version of xfs_fsr
that held the temp inode open for a few seconds before exiting so
that the filesystem could be shut down with an open owner change
recovery flags set on at least the temp inode. fsr leaves the temp
inode unlinked and in btree format, so this was necessary for the
owner change to be reliably replayed.
logprint confirmed the tmp inode in the log had the correct flag set:
INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88
INODE: #regs:3 ino:0x44 flags:0x209 dsize:88
^^^^^
0x200 is set, indicating a data fork owner change needed to be
replayed on inode 0x44. A printk in the revoery code confirmed that
the inode change was recovered:
XFS (vdc): Mounting Filesystem
XFS (vdc): Starting recovery (logdev: internal)
recovering owner change ino 0x44
XFS (vdc): Version 5 superblock detected. This kernel L support enabled!
Use of these features in this kernel is at your own risk!
XFS (vdc): Ending recovery (logdev: internal)
The script used to test this was:
$ cat ./recovery-fsr.sh
#!/bin/bash
dev=/dev/vdc
mntpt=/mnt/scratch
testfile=$mntpt/testfile
umount $mntpt
mkfs.xfs -f -m crc=1 $dev
mount $dev $mntpt
chmod 777 $mntpt
for i in `seq 10000 -1 0`; do
xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1
done
xfs_bmap -vp $testfile |head -20
xfs_fsr -d -v $testfile &
sleep 10
/home/dave/src/xfstests-dev/src/godown -f $mntpt
wait
umount $mntpt
xfs_logprint -t $dev |tail -20
time mount $dev $mntpt
xfs_bmap -vp $testfile
umount $mntpt
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For CRC enabled filesystems, we can't just swap inode forks from one
inode to another when defragmenting a file - the blocks in the inode
fork bmap btree contain pointers back to the owner inode. Hence if
we are to swap the inode forks we have to atomically modify every
block in the btree during the transaction.
We are doing an entire fork swap here, so we could create a new
transaction item type that indicates we are changing the owner of a
certain structure from one value to another. If we combine this with
ordered buffer logging to modify all the buffers in the tree, then
we can change the buffers in the tree without needing log space for
the operation. However, this then requires log recovery to perform
the modification of the owner information of the objects/structures
in question.
This does introduce some interesting ordering details into recovery:
we have to make sure that the owner change replay occurs after the
change that moves the objects is made, not before. Hence we can't
use a separate log item for this as we have no guarantee of strict
ordering between multiple items in the log due to the relogging
action of asynchronous transaction commits. Hence there is no
"generic" method we can use for changing the ownership of arbitrary
metadata structures.
For inode forks, however, there is a simple method of communicating
that the fork contents need the owner rewritten - we can pass a
inode log format flag for the fork for the transaction that does a
fork swap. This flag will then follow the inode fork through
relogging actions so when the swap actually gets replayed the
ownership can be changed immediately by log recovery. So that gives
us a simple method of "whole fork" exchange between two inodes.
This is relatively simple to implement, so it makes sense to do this
as an initial implementation to support xfs_fsr on CRC enabled
filesytems in the same manner as we do on existing filesystems. This
commit introduces the swapext driven functionality, the recovery
functionality will be in a separate patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Calling xfs_dir3_leaf_hdr_from_disk() in a verifier before
validating the magic numbers in the buffer results in ASSERT
failures due to mismatching magic numbers when a corruption occurs.
Seeing as the verifier is supposed to catch the corruption and pass
it back to the caller, having the verifier assert fail on error
defeats the purpose of detecting the errors in the first place.
Check the magic numbers direct from the buffer before decoding the
header.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
A couple of simple locking annotations and 0 vs NULL warnings.
Nothing that changes any code behaviour, just removes build noise.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
sparse reports:
fs/xfs/xfs_log_recover.c:2017:24: sparse: cast to restricted __be64
Because I used the wrong structure for the on-disk superblock cast
in 50d5c8d ("xfs: check LSN ordering for v5 superblocks during
recovery"). Fix it.
Reported-by: kbuild test robot
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
For 3.12-rc1 there are a number of bugfixes in addition to work to ease usage
of shared code between libxfs and the kernel, the rest of the work to enable
project and group quotas to be used simultaneously, performance optimisations
in the log and the CIL, directory entry file type support, fixes for log space
reservations, some spelling/grammar cleanups, and the addition of user
namespace support.
- introduce readahead to log recovery
- add directory entry file type support
- fix a number of spelling errors in comments
- introduce new Q_XGETQSTATV quotactl for project quotas
- add USER_NS support
- log space reservation rework
- CIL optimisations
- kernel/userspace libxfs rework
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=V4s4
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs updates from Ben Myers:
"For 3.12-rc1 there are a number of bugfixes in addition to work to
ease usage of shared code between libxfs and the kernel, the rest of
the work to enable project and group quotas to be used simultaneously,
performance optimisations in the log and the CIL, directory entry file
type support, fixes for log space reservations, some spelling/grammar
cleanups, and the addition of user namespace support.
- introduce readahead to log recovery
- add directory entry file type support
- fix a number of spelling errors in comments
- introduce new Q_XGETQSTATV quotactl for project quotas
- add USER_NS support
- log space reservation rework
- CIL optimisations
- kernel/userspace libxfs rework"
* tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs: (112 commits)
xfs: XFS_MOUNT_QUOTA_ALL needed by userspace
xfs: dtype changed xfs_dir2_sfe_put_ino to xfs_dir3_sfe_put_ino
Fix wrong flag ASSERT in xfs_attr_shortform_getvalue
xfs: finish removing IOP_* macros.
xfs: inode log reservations are too small
xfs: check correct status variable for xfs_inobt_get_rec() call
xfs: inode buffers may not be valid during recovery readahead
xfs: check LSN ordering for v5 superblocks during recovery
xfs: btree block LSN escaping to disk uninitialised
XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568
xfs: fix bad dquot buffer size in log recovery readahead
xfs: don't account buffer cancellation during log recovery readahead
xfs: check for underflow in xfs_iformat_fork()
xfs: xfs_dir3_sfe_put_ino can be static
xfs: introduce object readahead to log recovery
xfs: Simplify xfs_ail_min() with list_first_entry_or_null()
xfs: Register hotcpu notifier after initialization
xfs: add xfs sb v4 support for dirent filetype field
xfs: Add write support for dirent filetype field
xfs: Add read-only support for dirent filetype field
...
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue. This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.
The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.
Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara. I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.
JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
So move it to a header file shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
So fix up the export in xfs_dir2.h that is needed by userspace.
<sigh>
Now xfs_dir3_sfe_put_ino has been made static. Revert 98f7462 ("xfs:
xfs_dir3_sfe_put_ino can be static") to being non static so that the
code shared with userspace is identical again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This ASSERT is testing an if_flags flag value against
a di_aformat enum value. di_aformat is never assigned
XFS_IFINLINE.
This happens to work for now, because XFS_IFINLINE has
the same value as XFS_DINODE_FMT_LOCAL, and that's tested
just before we call this function.
However, I think the intention is to assert that we have
read in the data, i.e. XFS_IFINLINE on if_flags, before
we use if_data. This is done in other places through the
code as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
In optimising the CIL operations, some of the IOP_* macros for
calling log item operations were removed. Remove the rest of them as
Christoph requested.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Geoffrey Wehrman <gwehrman@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We've been seeing occasional problems with log space leaks and
transaction underruns such as this for some time:
XFS (dm-0): xlog_write: reservation summary:
trans type = FSYNC_TS (36)
unit res = 2740 bytes
current res = -4 bytes
total reg = 0 bytes (o/flow = 0 bytes)
ophdrs = 0 (ophdr space = 0 bytes)
ophdr + reg = 0 bytes
num regions = 0
Turns out that xfstests generic/311 is reliably reproducing this
problem with the test it runs at sequence 16 of it execution. It is
a 100% reliable reproducer with the mkfs configuration of "-b
size=1024 -m crc=1" on a 10GB scratch device.
The problem? Inode forks in btree format are logged in memory
format, not disk format (i.e. bmbt format, not bmdr format). That
means there is a btree block header being logged, when such a
structure is never written to the inode fork in bmdr format. The
bmdr header in the inode is only 4 bytes, while the bmbt header is
24 bytes for v4 filesystems and 72 bytes for v5 filesystems.
We currently reserve the inode size plus the rounded up overhead of
a logging a buffer, which is 128 bytes. That means the reservation
for a 512 byte inode is 640 bytes. What we can actually log is:
inode core, data and attr fork = 512 bytes
inode log format + log op header = 56 + 12 = 68 bytes
data fork bmbt hdr = 24/72 bytes
attr fork bmbt hdr = 24/72 bytes
So, for a v2 inodes we can log at least 628 bytes, but if we split that
inode over the end of the log across log buffers, we need to also
another log op header, which takes us to 640 bytes. If there's
another reservation taken out of this that I haven't taken into
account (perhaps multiple iclog splits?) or I haven't corectly
calculated the bmbt format space used (entirely possible), then
we will overun it.
For v3 inodes the maximum is actually 724 bytes, and even a
single maximally sized btree format fork can blow it (652 bytes).
And that's exactly what is happening with the FSYNC_TS transaction
in the above output - it's consumed 644 bytes of space after the CIL
context took the space reserved for it (2100 bytes).
This problem has always been present in the XFS code - the btree
format inode forks have always been logged in this manner. Hence
there has always been the possibility of an overrun with such a
transaction. The CRC code has just exposed it frequently enough to
be able to debug and understand the root cause....
So, let's fix all the inode log space reservations.
[ I'm so glad we spent the effort to clean up the transaction
reservation code. This is an easy fix now. ]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The call to xfs_inobt_get_rec() in xfs_dialloc_ag() passes 'j' as
the output status variable. The immediately following
XFS_WANT_CORRUPTED_GOTO() checks the value of 'i,' which is from
the previous lookup call and has already been checked. Fix the
corruption check to use 'j.'
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
CRC enabled filesystems fail log recovery with 100% reliability on
xfstests xfs/085 with the following failure:
XFS (vdb): Mounting Filesystem
XFS (vdb): Starting recovery (logdev: internal)
XFS (vdb): Corruption detected. Unmount and run xfs_repair
XFS (vdb): bad inode magic/vsn daddr 144 #0 (magic=0)
XFS: Assertion failed: 0, file: fs/xfs/xfs_inode_buf.c, line: 95
The problem is that the inode buffer has not been recovered before
the readahead on the inode buffer is issued. The checkpoint being
recovered actually allocates the inode chunk we are doing readahead
from, so what comes from disk during readahead is essentially
random and the verifier barfs on it.
This inode buffer readahead problem affects non-crc filesystems,
too, but xfstests does not trigger it at all on such
configurations....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Log recovery has some strict ordering requirements which unordered
or reordered metadata writeback can defeat. This can occur when an
item is logged in a transaction, written back to disk, and then
logged in a new transaction before the tail of the log is moved past
the original modification.
The result of this is that when we read an object off disk for
recovery purposes, the buffer that we read may not contain the
object type that recovery is expecting and hence at the end of the
checkpoint being recovered we have an invalid object in memory.
This isn't usually a problem, as recovery will then replay all the
other checkpoints and that brings the object back to a valid and
correct state, but the issue is that while the object is in the
invalid state it can be flushed to disk. This results in the object
verifier failing and triggering a corruption shutdown of log
recover. This is correct behaviour for the verifiers - the problem
is that we are not detecting that the object we've read off disk is
newer than the transaction we are replaying.
All metadata in v5 filesystems has the LSN of it's last modification
stamped in it. This enabled log recover to read that field and
determine the age of the object on disk correctly. If the LSN of the
object on disk is older than the transaction being replayed, then we
replay the modification. If the LSN of the object matches or is more
recent than the transaction's LSN, then we should avoid overwriting
the object as that is what leads to the transient corrupt state.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When testing LSN ordering code for v5 superblocks, it was discovered
that the the LSN embedded in the generic btree blocks was
occasionally uninitialised. These values didn't get written to disk
by metadata writeback - they got written by previous transactions in
log recovery.
The issue is here that the when the block is first allocated and
initialised, the LSN field was not initialised - it gets overwritten
before IO is issued on the buffer - but the value that is logged by
transactions that modify the header before it is written to disk
(and initialised) contain garbage. Hence the first recovery of the
buffer will stamp garbage into the LSN field, and that can cause
subsequent transactions to not replay correctly.
The fix is simply to initialise the bb_lsn field to zero when we
initialise the block for the first time.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The calculation doesn't take into account the size of the dir v3
header, so overestimates the hash entries in a node. This causes
directory buffer overruns when splitting and merging nodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfstests xfs/087 fails 100% reliably with this assert:
XFS (vdb): Mounting Filesystem
XFS (vdb): Starting recovery (logdev: internal)
XFS: Assertion failed: bp->b_flags & XBF_STALE, file: fs/xfs/xfs_buf.c, line: 548
while trying to read a dquot buffer in xlog_recover_dquot_ra_pass2().
The issue is that the buffer length to read that is passed to
xfs_buf_readahead is in units of filesystem blocks, not disk blocks.
(i.e. FSB, not daddr). Fix it but putting the correct conversion in
place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When doing readhaead in log recovery, we check to see if buffers are
cancelled before doing readahead. If we find a cancelled buffer,
however, we always decrement the reference count we have on it, and
that means that readahead is causing a double decrement of the
cancelled buffer reference count.
This results in log recovery *replaying cancelled buffers* as the
actual recovery pass does not find the cancelled buffer entry in the
commit phase of the second pass across a transaction. On debug
kernels, this results in an ASSERT failure like so:
XFS: Assertion failed: !(flags & XFS_BLF_CANCEL), file: fs/xfs/xfs_log_recover.c, line: 1815
xfstests generic/311 reproduces this ASSERT failure with 100%
reproducability.
Fix it by making readahead only peek at the buffer cancelled state
rather than the full accounting that xlog_check_buffer_cancelled()
does.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The "di_size" variable comes from the disk and it's a signed 64 bit.
We check the upper limit but we should check for negative numbers as
well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
TO: Dave Chinner <david@fromorbit.com>
CC: Ben Myers <bpm@sgi.com>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
It can take a long time to run log recovery operation because it is
single threaded and is bound by read latency. We can find that it took
most of the time to wait for the read IO to occur, so if one object
readahead is introduced to log recovery, it will obviously reduce the
log recovery time.
Log recovery time stat:
w/o this patch w/ this patch
real: 0m15.023s 0m7.802s
user: 0m0.001s 0m0.001s
sys: 0m0.246s 0m0.107s
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
At xfs_ail_min(), we do check if the AIL list is empty or not before
returning the first item in it with list_empty() and list_first_entry().
This can be simplified a bit with a new list operation routine that is
the list_first_entry_or_null() which has been introduced by:
commit 6d7581e62f
list: introduce list_first_entry_or_null
v2: make xfs_ail_min() as a static inline function and move it to
xfs_trans_priv.h as per Dave Chinner's comments.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently the code initializizes mp->m_icsb_mutex and other things
_after_ register_hotcpu_notifier().
As the notifier takes mp->m_icsb_mutex it can happen
that it takes the lock before it's initialization.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add XFS superblock v4 support for the file type field in the
directory entry feature.
This support adds a feature bit for version 4 superblocks and
leaves the original superblock 5 incompatibility bit.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Geoffrey Wehrman <gwehrman@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add support to propagate and add filetype values into the on-disk
directs. This involves passing the filetype into the xfs_da_args
structure along with the name and namelength for direct operations,
and encoding it into the dirent at the same time we write the inode
number into the dirent.
With write support, add the feature flag to the
XFS_SB_FEAT_INCOMPAT_ALL mask so we can now mount filesystems with
this feature set.
Performance of directory recursion is now much improved. Parallel
walk of ~50 million directory entries across hundreds of directories
improves significantly. Unpatched, no CRCs:
Walking via ls -R
real 3m19.886s
user 6m36.960s
sys 28m19.087s
THis is doing roughly 500 getdents() calls per second, and 250,000
inode lookups per second to determine the inode type at roughly
17,000 read IOPS. CPU usage is 90% kernel space.
With dtype support patched in and the fileset recreated with CRCs
enabled:
Walking via ls -R
real 0m31.316s
user 6m32.975s
sys 0m21.111s
This is doing roughly 3500 getdents() calls per second at 16,000
IOPS. There are no inode lookups at all. CPU usages is almost 100%
userspace.
This is a big win for recursive directory walks that only need to
find file names and file types.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add support for the file type field in directory entries so that
readdir can return the type of the inode the dirent points to to
userspace without first having to read the inode off disk.
The encoding of the type field is a single byte that is added to the
end of the directory entry name length. For all intents and
purposes, it appends a "hidden" byte to the name field which
contains the type information. As the directory entry is already of
dynamic size, helpers are already required to access and decode the
direct entry structures.
Hence the relevent extraction and iteration helpers are updated to
understand the hidden byte. Helpers for reading and writing the
filetype field from the directory entries are also added. Only the
read helpers are used by this patch. It also adds all the code
necessary to read the type information out of the dirents on disk.
Further we add the superblock feature bit and helpers to indicate
that we understand the on-disk format change. This is not a
compatible change - existing kernels cannot read the new format
successfully - so an incompatible feature flag is added. We don't
yet allow filesystems to mount with this flag yet - that will be
added once write support is added.
Finally, the code to take the type from the VFS, convert it to an
XFS on-disk type and put it into the xfs_name structures passed
around is added, but the directory code does not use this field yet.
That will be in the next patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For XFS, add support for Q_XGETQSTATV quotactl command.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Follow up with xfs naming style.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
