Commit Graph

20649 Commits

Author SHA1 Message Date
Eric Dumazet
4de075e043 tcp: rename tcp_skb_cb flags
Rename struct tcp_skb_cb "flags" to "tcp_flags" to ease code review and
maintenance.

Its content is a combination of FIN/SYN/RST/PSH/ACK/URG/ECE/CWR flags

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27 13:25:05 -04:00
Paul Bolle
395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
Eric Dumazet
b82d1bb4fd tcp: unalias tcp_skb_cb flags and ip_dsfield
struct tcp_skb_cb contains a "flags" field containing either tcp flags
or IP dsfield depending on context (input or output path)

Introduce ip_dsfield to make the difference clear and ease maintenance.
If later we want to save space, we can union flags/ip_dsfield

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27 02:20:08 -04:00
Eric Dumazet
7a269ffad7 tcp: ECN blackhole should not force quickack mode
While playing with a new ADSL box at home, I discovered that ECN
blackhole can trigger suboptimal quickack mode on linux : We send one
ACK for each incoming data frame, without any delay and eventual
piggyback.

This is because TCP_ECN_check_ce() considers that if no ECT is seen on a
segment, this is because this segment was a retransmit.

Refine this heuristic and apply it only if we seen ECT in a previous
segment, to detect ECN blackhole at IP level.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Jerry Chu <hkchu@google.com>
CC: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
CC: Jim Gettys <jg@freedesktop.org>
CC: Dave Taht <dave.taht@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27 00:58:44 -04:00
Antonio Quartulli
8b267b312d batman-adv: do_bcast has to be true for broadcast packets only
corrects a critical bug of the GW feature. This bug made all the unicast
packets destined to a GW to be sent as broadcast. This bug is present even if
the sender GW feature is configured as OFF. It's an urgent bug fix and should
be committed as soon as possible.

This was a regression introduced by 43676ab590

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-22 20:27:10 +02:00
David S. Miller
8decf86879 Merge branch 'master' of github.com:davem330/net
Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
2011-09-22 03:23:13 -04:00
Thomas Pedersen
ba4a14e102 mac80211: notify peer when shutting down peer link
Send a Mesh Peering Close frame when we deactivate a mesh peer link.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21 16:19:41 -04:00
Johannes Berg
6f2d93353a mac80211: fix AP/VLAN PS buffer race
When an AP interface is removed without the
AP/VLAN interfaces having been removed before
already, the AP-VLAN interface might still
have sleeping stations and buffer multicast
frames which will happen on the AP interface.
Thus, we need to remove AP/VLAN interfaces
before purging buffered broadcast frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21 16:19:41 -04:00
Jouni Malinen
1b9ca0272f cfg80211: Fix validation of AKM suites
Incorrect variable was used in validating the akm_suites array from
NL80211_ATTR_AKM_SUITES. In addition, there was no explicit
validation of the array length (we only have room for
NL80211_MAX_NR_AKM_SUITES).

This can result in a buffer write overflow for stack variables with
arbitrary data from user space. The nl80211 commands using the affected
functionality require GENL_ADMIN_PERM, so this is only exposed to admin
users.

Cc: stable@kernel.org
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21 15:58:24 -04:00
David S. Miller
0c070900f6 Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge 2011-09-21 15:25:47 -04:00
Steffen Klassert
bcf66bf54a xfrm: Perform a replay check after return from async codepaths
When asyncronous crypto algorithms are used, there might be many
packets that passed the xfrm replay check, but the replay advance
function is not called yet for these packets. So the replay check
function would accept a replay of all of these packets. Also the
system might crash if there are more packets in async processing
than the size of the anti replay window, because the replay advance
function would try to update the replay window beyond the bounds.

This pach adds a second replay check after resuming from the async
processing to fix these issues.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21 15:20:57 -04:00
Gao feng
561dac2d41 fib:fix BUG_ON in fib_nl_newrule when add new fib rule
add new fib rule can cause BUG_ON happen
the reproduce shell is
ip rule add pref 38
ip rule add pref 38
ip rule add to 192.168.3.0/24 goto 38
ip rule del pref 38
ip rule add to 192.168.3.0/24 goto 38
ip rule add pref 38

then the BUG_ON will happen
del BUG_ON and use (ctarget == NULL) identify whether this rule is unresolved

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21 15:16:40 -04:00
Luiz Augusto von Dentz
ab0ff76d1b Bluetooth: mark l2cap_create_iframe_pdu as static
l2cap_create_iframe_pdu is only used in l2cap_core.c

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:16 -03:00
Andre Guedes
f8523598ee Bluetooth: Check 'dev_class' in mgmt_device_found()
The mgmt_device_found event will be used to report LE devices found
during discovery procedure. Since LE advertising reports events
doesn't have class of device information, we need to check if
'dev_class' is not NULL before copying it.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:16 -03:00
Andre Guedes
a8f13c8cd2 Bluetooth: Reduce critical region.
This patch reduces the critial region (protected by hdev->lock) in
hci_cc_le_set_scan_enable(). This way, only really required code is
synchronized.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:16 -03:00
Anderson Briglia
51beabdf62 Bluetooth: Fix wrong memcpy size on LE start encryption
This patch fixes wrong memcpy size when copying rand value to
HCI_OP_LE_START_ENC command.
The compiler pretends that the array parameter was declared as a pointer
and sizeof reports the size of the pointer. [1]

[1] http://www.c-faq.com/aryptr/aryparmsize.html

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:16 -03:00
Vinicius Costa Gomes
ca10b5ee0c Bluetooth: Remove support for other SMP keys than the LTK
For now, only the LTK is properly supported. We are able to receive
and generate the other types of keys, but we are not able to use
them. So it's better not request them to be distributed.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:16 -03:00
Vinicius Costa Gomes
feb45eb596 Bluetooth: Fix not setting a pending security level
For slave initiated security, we should set a default security level,
for now BT_SECURITY_MEDIUM.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:15 -03:00
Vinicius Costa Gomes
a492cd52b5 Revert "Bluetooth: Add support for communicating keys with userspace"
This reverts commit 5a0a8b4974.

If we use separate messages and list for SMP specific keys we can
simplify the code.

Conflicts:

	net/bluetooth/mgmt.c

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:15 -03:00
Vinicius Costa Gomes
988c5997d3 Bluetooth: Use the LTK after receiving a LE Security Request
When receiving a security request from the remote device we should find
if there is already a LTK associated with the remote device, if found
we should use it to encrypt the link.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:15 -03:00
Vinicius Costa Gomes
0fb4eb6f63 Bluetooth: Fix sending wrong authentication requirements
Until we support any pairing method (Passkey Entry, OOB) that gives
MITM protection we shouldn't send that we have MITM protection.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:15 -03:00
Antti Julku
5e762444b0 Bluetooth: Add mgmt events for blacklisting
Add management interface events for blocking/unblocking a device.
Sender of the block device command gets cmd complete and other
mgmt sockets get the event. Event is also sent to mgmt sockets when
blocking is done with ioctl, e.g when blocking a device with
hciconfig. This makes it possible for bluetoothd to track status
of blocked devices when a third party block or unblocks a device.

Event sending is handled in mgmt_device_blocked function which gets
called from hci_blacklist_add in hci_core.c. A pending command is
added in mgmt_block_device, so that it can found when sending the
event - the event is not sent to the socket from which the pending
command came. Locks were moved out from hci_core.c to hci_sock.c
and mgmt.c, because locking is needed also for mgmt_pending_add in
mgmt.c.

Signed-off-by: Antti Julku <antti.julku@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:59:15 -03:00
Vinicius Costa Gomes
c908df362c Bluetooth: Use the MEDIUM security level for pairings
This lifts the requirement of 16 digits pin codes when pairing
with devices that do not support SSP when using the mgmt interface.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:13 -03:00
Vinicius Costa Gomes
e9bf2bf03e Bluetooth: Require authentication if MITM protection is requested
The HIGH security level requires a 16 digit pin code for non-SSP
bondings. Sometimes this requirement is not acceptable and we still
want protection againts MITM attacks (which is something that the
MEDIUM security level doesn't provide), for that we should allow
another way to request authentication without using the HIGH security
level.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:12 -03:00
Vinicius Costa Gomes
8aab47574a Bluetooth: Move SMP crypto functions to a workqueue
The function crypto_blkcipher_setkey() called by smp_e()
can sleep, so all the crypto work has to be moved to
hci_dev workqueue.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:12 -03:00
Vinicius Costa Gomes
1c1def09c4 Bluetooth: Move SMP fields to a separate structure
The objective is to make the core to have as little as possible
information about SMP procedures and logic. Now, all the SMP
specific information is hidden from the core.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:12 -03:00
David Herrmann
142c69c6ea Bluetooth: hidp: Add support for NO_INIT_REPORTS quirk
During setup the host initializes all HID reports. Some devices do not
support this. If this quirk is set, we skip the initialization.
See also usbhid_init_reports() for this quirk.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:12 -03:00
Peter Hurley
21061df3a2 Bluetooth: Add LE link type for debugfs output
Add LE link type as known connection type for debugfs stringizing
output.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:12 -03:00
Antti Julku
f6422ec624 Bluetooth: Add mgmt command for fast connectable mode
Add command to management interface for enabling/disabling the
fast connectable mode.

Signed-off-by: Antti Julku <antti.julku@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:12 -03:00
Vinicius Costa Gomes
cfafccf730 Bluetooth: Add link_type information to the mgmt Connected event
One piece of information that was lost when using the mgmt interface,
was the type of the connection. Using HCI events we used to know
the type of the connection based on the type of the event, e.g.
HCI_LE_Connection_Complete for LE links.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:11 -03:00
Vinicius Costa Gomes
160dc6ac12 Bluetooth: Add support for running SMP without a socket
When doing the pairing procedure we won't have an associated
socket, but we still have to do the SMP negotiation. This
adds support for encrypting the link and exchanging keys.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:11 -03:00
Vinicius Costa Gomes
7a512d0172 Bluetooth: Add support for pairing via mgmt over LE
Using the advertising cache we are able to infer the type
of the remote device, and so trigger pairing over the correct
link type.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:11 -03:00
Vinicius Costa Gomes
d26a234548 Bluetooth: Add a flag to indicate that SMP is going on
Add HCI_CONN_LE_SMP_PEND flag to indicate that SMP is pending
for that connection. This allows to have information that an SMP
procedure is going on for that connection.

We use the HCI_CONN_ENCRYPT_PEND to indicate that encryption
(HCI_LE_Start_Encryption) is pending for that connection.

While a SMP procedure is going on we hold an reference to the
connection, to avoid disconnections.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:11 -03:00
Vinicius Costa Gomes
e2dcd113d1 Bluetooth: Reset the security timer when a command is queued
Each time a SMP command is enqueued, we reset the SMP timer,
this way we follow exactly what the spec mandates:

"The Security Manager Timer shall be reset when an L2CAP SMP command is
queued for transmission." Vol. 3, Part H, Section 3.4

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:10 -03:00
Luiz Augusto von Dentz
52087a792c Bluetooth: make use of connection number to optimize the scheduler
This checks if there is any existing connection according to its type
before start iterating in the list and immediately stop iterating when
reaching the number of connections.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21 12:58:10 -03:00
Roy Li
8603e33d01 ipv6: fix a possible double free
When calling snmp6_alloc_dev fails, the snmp6 relevant memory
are freed by snmp6_alloc_dev. Calling in6_dev_finish_destroy
will free these memory twice.

Double free will lead that undefined behavior occurs.

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20 15:10:16 -04:00
Eric Dumazet
d24f22f3df ip6_tunnel: add optional fwmark inherit
Add IP6_TNL_F_USE_ORIG_FWMARK to ip6_tunnel, so that ip6_tnl_xmit2()
makes a route lookup taking into account skb->fwmark and doesnt cache
lookup result.

This permits more flexibility in policies and firewall setups.

To setup such a tunnel, "fwmark inherit" option should be added to "ip
-f inet6 tunnel" command.

Reported-by: Anders Franzen <Anders.Franzen@ericsson.com>
CC: Hans Schillström <hans.schillstrom@ericsson.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20 14:50:00 -04:00
Ilan Elias
6a2968aaf5 NFC: basic NCI protocol implementation
The NFC Controller Interface (NCI) is a standard
communication protocol between an NFC Controller (NFCC)
and a Device Host (DH), defined by the NFC Forum.

Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20 14:43:49 -04:00
Ilan Elias
55eb94f9e9 NFC: move nfc.h from include/net to include/net/nfc
The file nfc.h was moved from include/net to include/net/nfc,
since new NFC header files will be added to include/net/nfc.

Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20 14:43:49 -04:00
Ilan Elias
8b3fe7b591 NFC: Add dev_up and dev_down control operations
Add 2 new nfc control operations:
dev_up to turn on the nfc device
dev_down to turn off the nfc device

Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20 14:43:49 -04:00
Alexander Simon
a7ce1c9446 mac80211: fix indentation
Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20 14:43:48 -04:00
Rajkumar Manoharan
e30815016b wireless: Do not allow disabled channel in scan request
cfg80211_conn_scan allows disabled channels at scan request.
Hence probe request was seen at the disabled one. This patch
ensures that disabled channel never be added into the scan
request's channel list.

Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20 14:43:48 -04:00
David S. Miller
46151ae817 Merge branch 'tipc-Sep17-2011' of git://openlinux.windriver.com/people/paulg/net-next 2011-09-20 14:39:04 -04:00
John W. Linville
4d8b61490c Merge branch 'master' of git://git.infradead.org/users/linville/wireless
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
2011-09-20 14:11:55 -04:00
John W. Linville
eebb6fb4ae Merge branch 'master' of ssh://infradead/~/public_git/wireless into for-davem 2011-09-20 09:19:14 -04:00
Jouni Malinen
c9df56b48e cfg80211/nl80211: Add PMKSA caching candidate event
When the driver (or most likely firmware) decides which AP to use
for roaming based on internal scan result processing, user space
needs to be notified of PMKSA caching candidates to allow RSN
pre-authentication to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19 16:10:14 -04:00
Mohammed Shafi Shajakhan
6be19ccd69 rfkill: properly assign a boolean type
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19 16:10:14 -04:00
Johannes Berg
3919349891 cfg80211: validate IBSS BSSID
The IBSS BSSID is never validated, so an
invalid one might end up being used. Fix
this by rejecting invalid configuration.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19 16:10:13 -04:00
Rajkumar Manoharan
7cc44ed48d mac80211: Fix regression on queue stop during 2040 bss change
The commit "mac80211: stop tx before doing hw config and
rate update" stops the tx queue and call drv_flush so frequently
whenever a beacon got received with 11n htcap. This leads to
massive "Failed to stop TX DMA" logspam on embedded hw. So the
queue stop and flush should be called if and only if there is a
change in the channel type.

Reported-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19 16:10:11 -04:00
Eliad Peller
0c28ec587a cfg80211: add cfg80211_find_vendor_ie() function
Add function to find vendor-specific ie (along with
vendor-specific ie struct definition and P2P OUI values)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19 15:49:11 -04:00
John W. Linville
b53d63ecce Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem 2011-09-19 15:00:16 -04:00
John W. Linville
5d59bbce3d Merge branch 'for-3.1' of git://github.com/padovan/bluetooth-next 2011-09-19 14:47:29 -04:00
Zheng Yan
f779b2d60a tcp: fix validation of D-SACK
D-SACK is allowed to reside below snd_una. But the corresponding check
in tcp_is_sackblock_valid() is the exact opposite. It looks like a typo.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-18 22:37:34 -04:00
Linus Torvalds
b0e7031ac0 Merge git://github.com/davem330/net
* git://github.com/davem330/net: (62 commits)
  ipv6: don't use inetpeer to store metrics for routes.
  can: ti_hecc: include linux/io.h
  IRDA: Fix global type conflicts in net/irda/irsysctl.c v2
  net: Handle different key sizes between address families in flow cache
  net: Align AF-specific flowi structs to long
  ipv4: Fix fib_info->fib_metrics leak
  caif: fix a potential NULL dereference
  sctp: deal with multiple COOKIE_ECHO chunks
  ibmveth: Fix checksum offload failure handling
  ibmveth: Checksum offload is always disabled
  ibmveth: Fix issue with DMA mapping failure
  ibmveth: Fix DMA unmap error
  pch_gbe: support ML7831 IOH
  pch_gbe: added the process of FIFO over run error
  pch_gbe: fixed the issue which receives an unnecessary packet.
  sfc: Use 64-bit writes for TX push where possible
  Revert "sfc: Use write-combining to reduce TX latency" and follow-ups
  bnx2x: Fix ethtool advertisement
  bnx2x: Fix 578xx link LED
  bnx2x: Fix XMAC loopback test
  ...
2011-09-18 11:02:26 -07:00
Ying Xue
94362c7e49 tipc: Remove unused link event tracking code
Elimintes prototype link event tracking functionality that has never
been fleshed out and doesn't do anything useful at the current time.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:15 -04:00
Ying Xue
7e2447763c tipc: Remove callback field from subscription structure
Eliminate the "event_cb" member from TIPC's "subscription" structure
since the function pointer it holds always points to subscr_send_event().

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:14 -04:00
Ying Xue
245f3d342d tipc: Simplify prohibition of listen and accept for connectionless sockets
Modifies the proto_ops structure used by TIPC DGRAM and RDM sockets
so that calls to listen() and accept() are handled by existing kernel
"unsupported operation" routines, and eliminates the related checks
in the listen and accept routines used by SEQPACKET and STREAM sockets
that are no longer needed.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:12 -04:00
Ying Xue
1d835874af tipc: Add support for SO_SNDTIMEO socket option
Adds support for the SO_SNDTIMEO socket option. (This complements the
existing support for SO_RCVTIMEO that is already present.)

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:11 -04:00
Allan Stephens
9aa88c2a50 tipc: Enhance sending of bulk name table messages
Modifies the initial transfer of name table entries to a new neighboring
node so that the messages are enqueued as a unit, rather than individually.

The revised algorithm now locates the link carrying the message only once,
and eliminates unnecessary checks for link congestion, message fragmentation,
and message bundling that are not required when sending these messages.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:10 -04:00
Paul Gortmaker
1c553bb52e tipc: relocate/coalesce node cast in tipc_named_node_up
Functions like this are called using unsigned longs from
function pointers.  In this case, the function is passed in
a node which is normally internally treated as a u32 by TIPC.

Rather than add more casts into this function in the future
for each added use of node within, move the cast to a single
place on a local.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:09 -04:00
Allan Stephens
149ce37c8d tipc: Prevent fragmented messages during initial name table exchange
Reduces the maximum size of messages sent during the initial exchange
of name table information between two nodes to be no larger than the
MTU of the first link established between the nodes. This ensures that
messages will never need to be fragmented, which would add unnecessary
overhead to the name table synchronization mechanism.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:08 -04:00
Allan Stephens
909234cdd2 tipc: Lower limits for number of bearers and media types
Reduces the number of bearers a node can support to 2, which can use
identical or non-identical media. This change won't impact users,
since they are currently limited to a maximum of 2 Ethernet bearers,
and will save memory by eliminating a number of unused entries in
TIPC's media and bearer arrays.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:07 -04:00
Allan Stephens
18abf0fb6b tipc: Remove redundant search when enabling bearer
Removes obsolete code that searches for an Ethernet bearer structure entry
to use for a newly enabled bearer, since this search is now performed
at the start of the enabling algorithm.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:06 -04:00
Allan Stephens
bcd326e844 tipc: Fix unsafe device list search when enabling bearer
Ensures that the device list lock is held while trying to locate
the Ethernet device used by a newly enabled bearer, so that the
addition or removal of a device does not cause problems.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:05 -04:00
Allan Stephens
b4b5610223 tipc: Ensure both nodes recognize loss of contact between them
Enhances TIPC to ensure that a node that loses contact with a
neighboring node does not allow contact to be re-established until
it sees that its peer has also recognized the loss of contact.

Previously, nodes that were connected by two or more links could
encounter a situation in which node A would lose contact with node B
on all of its links, purge its name table of names published by B,
and then fail to repopulate those names once contact with B was restored.
This would happen because B was able to re-establish one or more links
so quickly that it never reached a point where it had no links to A --
meaning that B never saw a loss of contact with A, and consequently
didn't re-publish its names to A.

This problem is now prevented by enhancing the cleanup done by TIPC
following a loss of contact with a neighboring node to ensure that
node A ignores all messages sent by B until it receives a LINK_PROTOCOL
message that indicates B has lost contact with A, thereby preventing
the (re)establishment of links between the nodes. The loss of contact
is recognized when a RESET or ACTIVATE message is received that has
a "redundant link exists" field of 0, indicating that B's sending link
endpoint is in a reset state and that B has no other working links.

Additionally, TIPC now suppresses the sending of (most) link protocol
messages to a neighboring node while it is cleaning up after an earlier
loss of contact with that node. This stops the peer node from prematurely
activating its link endpoint, which would prevent TIPC from later
activating its own end. TIPC still allows outgoing RESET messages to
occur during cleanup, to avoid problems if its own node recognizes
the loss of contact first and tries to notify the peer of the situation.

Finally, TIPC now recognizes an impending loss of contact with a peer node
as soon as it receives a RESET message on a working link that is the
peer's only link to the node, and ensures that the link protocol
suppression mentioned above goes into effect right away -- that is,
even before its own link endpoints have failed. This is necessary to
ensure correct operation when there are redundant links between the nodes,
since otherwise TIPC would send an ACTIVATE message upon receiving a RESET
on its first link and only begin suppressing when a RESET on its second
link was received, instead of initiating suppression with the first RESET
message as it needs to.

Note: The reworked cleanup code also eliminates a check that prevented
a link endpoint's discovery object from responding to incoming messages
while stale name table entries are being purged. This check is now
unnecessary and would have slowed down re-establishment of communication
between the nodes in some situations.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:03 -04:00
Eric Dumazet
765cf9976e tcp: md5: remove one indirection level in tcp_md5sig_pool
tcp_md5sig_pool is currently an 'array' (a percpu object) of pointers to
struct tcp_md5sig_pool. Only the pointers are NUMA aware, but objects
themselves are all allocated on a single node.

Remove this extra indirection to get proper percpu memory (NUMA aware)
and make code simpler.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-17 01:15:46 -04:00
Yan, Zheng
8e2ec63917 ipv6: don't use inetpeer to store metrics for routes.
Current IPv6 implementation uses inetpeer to store metrics for
routes. The problem of inetpeer is that it doesn't take subnet
prefix length in to consideration. If two routes have the same
address but different prefix length, they share same inetpeer.
So changing metrics of one route also affects the other. The
fix is to allocate separate metrics storage for each route.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-17 00:57:26 -04:00
David S. Miller
f78a5fda91 Revert "Scm: Remove unnecessary pid & credential references in Unix socket's send and receive path"
This reverts commit 0856a30409.

As requested by Eric Dumazet, it has various ref-counting
problems and has introduced regressions.  Eric will add
a more suitable version of this performance fix.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 19:34:00 -04:00
stephen hemminger
d97a077a15 wan: make LAPB callbacks const
This is compile tested only.
Suggested by dumpster diving in PAX.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 19:20:20 -04:00
Andi Kleen
9566042ef8 IRDA: Fix global type conflicts in net/irda/irsysctl.c v2
The externs here didn't agree with the declarations in qos.c.

Better would be probably to move this into a header, but since it's
common practice to have naked externs with sysctls I left it for now.

Cc: samuel@sortiz.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 19:17:09 -04:00
Tore Anderson
026359bc6e ipv6: Send ICMPv6 RSes only when RAs are accepted
This patch improves the logic determining when to send ICMPv6 Router
Solicitations, so that they are 1) always sent when the kernel is
accepting Router Advertisements, and 2) never sent when the kernel is
not accepting RAs. In other words, the operational setting of the
"accept_ra" sysctl is used.

The change also makes the special "Hybrid Router" forwarding mode
("forwarding" sysctl set to 2) operate exactly the same as the standard
Router mode (forwarding=1). The only difference between the two was
that RSes was being sent in the Hybrid Router mode only. The sysctl
documentation describing the special Hybrid Router mode has therefore
been removed.

Rationale for the change:

Currently, the value of forwarding sysctl is the only thing determining
whether or not to send RSes. If it has the value 0 or 2, they are sent,
otherwise they are not. This leads to inconsistent behaviour in the
following cases:

* accept_ra=0, forwarding=0
* accept_ra=0, forwarding=2
* accept_ra=1, forwarding=2
* accept_ra=2, forwarding=1

In the first three cases, the kernel will send RSes, even though it will
not accept any RAs received in reply. In the last case, it will not send
any RSes, even though it will accept and process any RAs received. (Most
routers will send unsolicited RAs periodically, so suppressing RSes in
the last case will merely delay auto-configuration, not prevent it.)

Also, it is my opinion that having the forwarding sysctl control RS
sending behaviour (completely independent of whether RAs are being
accepted or not) is simply not what most users would intuitively expect
to be the case.

Signed-off-by: Tore Anderson <tore@fud.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 19:14:41 -04:00
dpward
aa1c366e4f net: Handle different key sizes between address families in flow cache
With the conversion of struct flowi to a union of AF-specific structs, some
operations on the flow cache need to account for the exact size of the key.

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 17:47:28 -04:00
Yan, Zheng
19c1ea14c9 ipv4: Fix fib_info->fib_metrics leak
Commit 4670994d(net,rcu: convert call_rcu(fc_rport_free_rcu) to
kfree_rcu()) introduced a memory leak. This patch reverts it.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 17:42:26 -04:00
Eric Dumazet
4fb66b8210 caif: fix a potential NULL dereference
Commit bd30ce4bc0 (caif: Use RCU instead of spin-lock in caif_dev.c)
added a potential NULL dereference in case alloc_percpu() fails.

caif_device_alloc() can also use GFP_KERNEL instead of GFP_ATOMIC.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 17:40:34 -04:00
Oliver Hartkopp
c1aabdf379 can-gw: add netlink based CAN routing
This patch adds a CAN Gateway/Router to route (and modify) CAN frames.

It is based on the PF_CAN core infrastructure for msg filtering and msg
sending and can optionally modify routed CAN frames on the fly.
CAN frames can *only* be routed between CAN network interfaces (one hop).
They can be modified with AND/OR/XOR/SET operations as configured by the
netlink configuration interface known e.g. from iptables. From the netlink
view this can-gw implements RTM_{NEW|DEL|GET}ROUTE for PF_CAN.

The CAN specific userspace tool to manage CAN routing entries can be found in
the CAN utils http://svn.berlios.de/wsvn/socketcan/trunk/can-utils/cangw.c
at the SocketCAN SVN on BerliOS.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 17:37:51 -04:00
Max Matveev
d5ccd49660 sctp: deal with multiple COOKIE_ECHO chunks
Attempt to reduce the number of IP packets emitted in response to single
SCTP packet (2e3216cd) introduced a complication - if a packet contains
two COOKIE_ECHO chunks and nothing else then SCTP state machine corks the
socket while processing first COOKIE_ECHO and then loses the association
and forgets to uncork the socket. To deal with the issue add new SCTP
command which can be used to set association explictly. Use this new
command when processing second COOKIE_ECHO chunk to restore the context
for SCTP state machine.

Signed-off-by: Max Matveev <makc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 17:17:22 -04:00
Felix Fietkau
7107676a3a mac80211: fix endian issues and comments for BAR failure handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16 16:45:42 -04:00
Rajkumar Manoharan
3965ac0020 wireless: Fix rate mask for scan request
The scan request received from cfg80211_connect do not
have proper rate mast. So the probe request sent on each
channel do not have proper the supported rates ie.

Cc: stable@kernel.org
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16 15:32:11 -04:00
Rajkumar Manoharan
aa3d7eef39 wireless: Reset beacon_found while updating regulatory
During the association, the regulatory is updated by country IE
that reaps the previously found beacons. The impact is that
after a STA disconnects *or* when for any reason a regulatory
domain change happens the beacon hint flag is not cleared
therefore preventing future beacon hints to be learned.
This is important as a regulatory domain change or a restore
of regulatory settings would set back the passive scan and no-ibss
flags on the channel. This is the right place to do this given that
it covers any regulatory domain change.

Cc: stable@kernel.org
Reviewed-by: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16 15:32:08 -04:00
David S. Miller
9c223f9bba Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless-next 2011-09-16 15:14:19 -04:00
Sage Weil
935b639a04 libceph: fix linger request requeuing
The r_req_lru_item list node moves between several lists, and that cycle
is not directly related (and does not begin) with __register_request().
Initialize it in the request constructor, not __register_request(). This
fixes later badness (below) when OSDs restart underneath an rbd mount.

Crashes we've seen due to this include:

[  213.974288] kernel BUG at net/ceph/messenger.c:2193!

and

[  144.035274] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[  144.035278] IP: [<ffffffffa036c053>] con_work+0x1463/0x2ce0 [libceph]

Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-16 11:13:17 -07:00
Noah Watkins
1cad78932a libceph: fix parse options memory leak
ceph_destroy_options does not free opt->mon_addr that
is allocated in ceph_parse_options.

Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-16 09:19:53 -07:00
Jim Schutt
c0d5f9db1c libceph: initialize ack_stamp to avoid unnecessary connection reset
Commit 4cf9d54463 recorded when an outgoing ceph message was ACKed,
in order to avoid unnecessary connection resets when an OSD is busy.

However, ack_stamp is uninitialized, so there is a window between
when the message is sent and when it is ACKed in which handle_timeout()
interprets the unitialized value as an expired timeout, and resets
the connection unnecessarily.

Close the window by initializing ack_stamp.

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-16 09:16:22 -07:00
David S. Miller
52b9aca7ae Merge branch 'master' of ../netdev/ 2011-09-16 01:09:02 -04:00
Jiri Pirko
4bc71cb983 net: consolidate and fix ethtool_ops->get_settings calling
This patch does several things:
- introduces __ethtool_get_settings which is called from ethtool code and
  from drivers as well. Put ASSERT_RTNL there.
- dev_ethtool_get_settings() is replaced by __ethtool_get_settings()
- changes calling in drivers so rtnl locking is respected. In
  iboe_get_rate was previously ->get_settings() called unlocked. This
  fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same
  problem. Also fixed by calling __dev_get_by_index() instead of
  dev_get_by_index() and holding rtnl_lock for both calls.
- introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create()
  so bnx2fc_if_create() and fcoe_if_create() are called locked as they
  are from other places.
- use __ethtool_get_settings() in bonding code

Signed-off-by: Jiri Pirko <jpirko@redhat.com>

v2->v3:
	-removed dev_ethtool_get_settings()
	-added ASSERT_RTNL into __ethtool_get_settings()
	-prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock
	 around it and __ethtool_get_settings() call
v1->v2:
        add missing export_symbol
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits]
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 17:32:26 -04:00
John W. Linville
8ea9ac0a47 Merge branch 'master' of git://git.infradead.org/users/linville/wireless into for-davem 2011-09-15 15:37:02 -04:00
alex.bluesman.smirnov@gmail.com
dcef115180 6LoWPAN: fix skb_copy call
This patch fixes 2 issues in lowpan_skb_deliver function:
1. Check for return status of skb_copy call;
2. Use skb_copy with proper GFP flag, drop check for non-interrupt
context.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:35 -04:00
Jiri Pirko
fa3df928e0 br: remove redundant check and init
Since these checks and initialization are done in
dev_ethtool_get_settings called later on, remove this redundancy.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:34 -04:00
Eric Dumazet
c37e0c9930 net: linkwatch: allow vlans to get carrier changes faster
There is a time-lag of IFF_RUNNING flag consistency between vlan and
real devices when the real devices are in problem such as link or cable
broken.

This leads to a degradation of Availability such as a delay of failover
in HA systems using vlan since the detection of the problem at real
device is delayed.

We can avoid the linkwatch delay (~1 sec) for devices linked to another
ones, since delay is already done for the realdev.

Based on a previous patch from Mitsuo Hayasaka

Reported-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Tom Herbert <therbert@google.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jesse Gross <jesse@nicira.com>
Tested-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:34 -04:00
Huang Ying
1bc144b625 net, rds, Replace xlist in net/rds/xlist.h with llist
The functionality of xlist and llist is almost same.  This patch
replace xlist with llist to avoid code duplication.

Known issues: don't know how to test this, need special hardware?

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andy Grover <andy.grover@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
Dan Carpenter
dc00fd4441 6LoWPAN: call dev_put() on error in lowpan_newlink()
We should release the dev_hold() on error before returning here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
Dan Carpenter
aec9db355c 6LoWPAN: use the _safe version of list_for_each
When we kfree(entry) that causes a use-after-free bug so we have to
use list_for_each_entry_safe() safe here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
Dan Carpenter
90d0963d17 6LoWPAN: use kfree_skb() instead of kfree()
Use kfree_skb() to free sbk_buffs.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
nhorman
31dda0ae93 net: don't clear IFF_XMIT_DST_RELEASE in ether_setup
d88733150 introduced the IFF_SKB_TX_SHARING flag, which I unilaterally set in
ether_setup.  In doing this I didn't realize that other flags (such as
IFF_XMIT_DST_RELEASE) might be set prior to calling the ether_setup routine.
This patch changes ether_setup to or in SKB_TX_SHARING so as not to
inadvertently clear other existing flags.  Thanks to Pekka Riikonen for pointing
out my error

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Pekka Riikonen <priikone@iki.fi>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:44 -04:00
Michael S. Tsirkin
48c830120f net: copy userspace buffers on device forwarding
dev_forward_skb loops an skb back into host networking
stack which might hang on the memory indefinitely.
In particular, this can happen in macvtap in bridged mode.
Copy the userspace fragments to avoid blocking the
sender in that case.

As this patch makes skb_copy_ubufs extern now,
I also added some documentation and made it clear
the SKBTX_DEV_ZEROCOPY flag automatically instead
of doing it in all callers. This can be made into a separate
patch if people feel it's worth it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:44 -04:00
dpward
0542b69e2c net: Make flow cache namespace-aware
flow_cache_lookup will return a cached object (or null pointer) that the
resolver (i.e. xfrm_policy_lookup) previously found for another namespace
using the same key/family/dir.  Instead, make the namespace part of what
identifies entries in the cache.

As before, flow_entry_valid will return 0 for entries where the namespace
has been deleted, and they will be removed from the cache the next time
flow_cache_gc_task is run.

Reported-by: Andrew Dickinson <whydna@whydna.net>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:44 -04:00
rajan.aggarwal85@gmail.com
d9e64f83eb net/can/af_can.c: Change del_timer to del_timer_sync
This is important for SMP platform to check if timer function is
executing on other CPU with deleting the timer.

Signed-off-by: Rajan Aggarwal <Rajan Aggarwal rajan.aggarwal85@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:43 -04:00
Eric Dumazet
946cedccbd tcp: Change possible SYN flooding messages
"Possible SYN flooding on port xxxx " messages can fill logs on servers.

Change logic to log the message only once per listener, and add two new
SNMP counters to track :

TCPReqQFullDoCookies : number of times a SYNCOOKIE was replied to client

TCPReqQFullDrop : number of times a SYN request was dropped because
syncookies were not enabled.

Based on a prior patch from Tom Herbert, and suggestions from David.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:43 -04:00
Igor Maravić
27e95a8c67 pkt_sched: cls_rsvp.h was outdated
File cls_rsvp.h in /net/sched was outdated. I'm sending you patch for this
file.

[ tb[] array should be indexed by X not X-1 -DaveM ]

Signed-off-by: Igor Maravić <igorm@etf.rs>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 14:49:43 -04:00
Oliver Neukum
2d20a26a92 Bluetooth: Fix timeout on scanning for the second time
The checks for HCI_INQUIRY and HCI_MGMT were in the wrong order,
so that second scans always failed.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-15 11:54:05 -03:00
Jiri Kosina
e060c38434 Merge branch 'master' into for-next
Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.
2011-09-15 15:08:18 +02:00
Joe Perches
3dbd443983 net: Convert vmalloc/memset to vzalloc
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 13:59:25 +02:00
Shahar Levi
1ea57b1f12 mac80211: Update device channel in case of HW channel switch supported
The hw.conf.channel value is not updated properly for drivers that
support HW channel switch.  Since the switch is done entirely by the
driver and we don't call ieee80211_hw_config(), this value remains
untouched.  This patch fixes that by setting the new channel directly in
ieee80211_chswitch_work().

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:52 -04:00
Javier Cardona
5fbdf4a2df mac80211: Mark all mesh stations as QoS capable
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:51 -04:00
Javier Cardona
2154c81c32 mac80211: Mesh data frames must have the QoS header
Per sec 7.1.3.5 of draft 12.0 of 802.11s, mesh frames indicate the
presence of the mesh control header in their QoS header.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:50 -04:00
Javier Cardona
4777be4163 mac80211: Start implementing QoS support for mesh interfaces
In order to support QoS in mesh, we need to assign queue mapping only
after the next hop has been resolved, both for forwarded and locally
originated frames.  Also, now that this is fixed, remove the XXX comment
in ieee80211_select_queue().

Also, V-Shy Ho reported that the queue mapping was not being applied to
the forwarded frame (fwd_skb instead of skb).  Fixed that as well.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:48 -04:00
Johannes Berg
4319e19327 cfg80211: verify format of uAPSD information
The format is intended to be like the subfields
in the QoS Info field, verify that is the case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:43 -04:00
Johannes Berg
cd0b8d89c7 mac80211: further optimise buffer expiry timer
Juuso optimised the timer to not run all the
time in commit 3393a608c4.
However, after that it will still run once
more even if all frames just expired. Fixing
that also makes the function return value a
little clearer in the process.

Also, while at it, change the return value
to bool (instead of int).

Cc: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:31 -04:00
Arik Nemtsov
7827493b88 mac80211: add ssid config to bss information in AP-mode
Set SSID information from nl80211 beacon parameters. Advertise changes
in SSID to low level drivers.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:26 -04:00
Christian Lamparter
64ed5cf013 minstrel_ht: fix Open BA session request floods
Minstrel HT tries very hard to establish a BA session with
each peer once there's some data on the way. However the
stack does not inform minstrel if an aggregation session
is already in place, so it keeps trying and wastes good
cycles in the tx status path.

[ 8149.946393] Open BA session requested for $AP tid 0
[ 8150.048765] Open BA session requested for $AP tid 0
[ 8150.174509] Open BA session requested for $AP tid 0
[ 8150.274376] Open BA session requested for $AP tid 0
...

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:23 -04:00
Rajkumar Manoharan
693828fe92 mac80211: stop tx before doing hw config and rate update
The assumption is that during the hw config, transmission was
already stopped by mac80211. Sometimes the AP can be switching
b/w the ht modes due to intolerant or etc where STA is in
the middle of transmission. In such scenario, buffer overflow
was observed at driver side. And also before updating the rate
control, the frames are continued to xmited with older rates.
This patch ensures that the frames are always xmitted with
updated rates and avoid buffer overflow.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:18 -04:00
Javier Cardona
cfee66b0f9 mac80211: Stop forwarding mesh traffic when tx queues are full
Tx flow control for non-mesh modes of operation only needs to act on the
net device queues: when the hardware queues are full we stop accepting
traffic from the net device.  In mesh, however, we also need to stop
forwarding traffic.  This patch checks the hardware queues before
attempting to forward a mesh frame.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:17 -04:00
Thomas Pedersen
2157fdd6ae mac80211: check if mesh frame is in RMC after decrypt
To check whether a frame is in the RMC, we need access to the mesh
header.  This header is encrypted in encrypted data frames, so make this
check after the frame has been decrypted.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:16 -04:00
Felix Fietkau
8c771244fb mac80211: make ieee80211_send_bar available for drivers
To properly maintain the peer's block ack window, the driver needs to be
able to control the new starting sequence number that is sent along with
the BlockAckReq frame.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:56:16 -04:00
Sven Neumann
d7549cbb9a cfg80211: reorder code to obsolete forward declaration
Reorder functions to remove the need for a forward declaration
introduced by the last commit.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: linux-wireless@vger.kernel.org
Acked-by:  Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:26:39 -04:00
Sven Neumann
eac03e3819 cfg80211: hold reg_mutex when updating regulatory
The function wiphy_update_regulatory() uses the static variable
last_request and thus needs to be called with reg_mutex held.
This is the case for all users in reg.c, but the function was
exported for use by wiphy_register(), from where it is called
without the lock being held.

Fix this by making wiphy_update_regulatory() private and introducing
regulatory_update() as a wrapper that acquires and holds the lock.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: linux-wireless@vger.kernel.org
Acked-by:  Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14 13:26:39 -04:00
Mi Jinlong
849a1cf13d SUNRPC: Replace svc_addr_u by sockaddr_storage
For IPv6 local address, lockd can not callback to client for
missing scope id when binding address at inet6_bind:

 324       if (addr_type & IPV6_ADDR_LINKLOCAL) {
 325               if (addr_len >= sizeof(struct sockaddr_in6) &&
 326                   addr->sin6_scope_id) {
 327                       /* Override any existing binding, if another one
 328                        * is supplied by user.
 329                        */
 330                       sk->sk_bound_dev_if = addr->sin6_scope_id;
 331               }
 332
 333               /* Binding to link-local address requires an interface */
 334               if (!sk->sk_bound_dev_if) {
 335                       err = -EINVAL;
 336                       goto out_unlock;
 337               }

Replacing svc_addr_u by sockaddr_storage, let rqstp->rq_daddr contains more info
besides address.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-14 08:21:48 -04:00
Pavel Roskin
56e6786e59 cfg80211: print bandwidth in chan_reg_rule_print_dbg()
Two spaces and the second "KHz" suggest that the code author meant to
print the bandwidth but forgot it.  The code appears in commit e702d3cf
already with two spaces and "KHz" in place of the bandwidth.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:53:46 -04:00
Luciano Coelho
a1f1c21c18 nl80211/cfg80211: add match filtering for sched_scan
Introduce filtering for scheduled scans to reduce the number of
unnecessary results (which cause useless wake-ups).

Add a new nested attribute where sets of parameters to be matched can
be passed when starting a scheduled scan.  Only scan results that
match any of the sets will be returned.

At this point, the set consists of a single parameter, an SSID.  This
can be easily extended in the future to support more complex matches.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:53:45 -04:00
Eliad Peller
cedb5412ba nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag
add WIPHY_FLAG_AP_UAPSD flag to indicate uapsd support on
AP mode.

Advertise it to userspace by including a new
NL80211_ATTR_SUPPORT_AP_UAPSD attribute.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:50:56 -04:00
Dan Carpenter
4c5ade4149 mac80211: handle allocation failures in mesh_pathtbl_init()
The calls to kzalloc() weren't checked here and it upsets the static
checkers.  Obviously they're not super likely to fail, but we might
as well add some error handling.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:48:48 -04:00
Arik Nemtsov
edf6b784c0 mac80211: add flag to indicate HW only Tx-agg setup support
When this flag is set, Tx A-MPDU sessions will not be started by
mac80211. This flag is required for devices that support Tx A-MPDU setup
in hardware.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:45:03 -04:00
Joe Perches
24616152b1 wireless: Remove unnecessary OOM logging messages
Removing unnecessary messages saves code and text.

Site specific OOM messages are duplications of a generic MM
out of memory message and aren't really useful, so just
delete them.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:45:02 -04:00
Joe Perches
246c081204 rfkill: Remove unnecessary OOM logging messages
Removing unnecessary messages saves code and text.

Site specific OOM messages are duplications of a generic MM
out of memory message and aren't really useful, so just
delete them.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:45:02 -04:00
Joe Perches
d15b84590a mac80211: Remove unnecessary OOM logging messages
Removing unnecessary messages saves code and text.

Site specific OOM messages are duplications of a generic MM
out of memory message and aren't really useful, so just
delete them.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:45:02 -04:00
Javier Cardona
239289e446 mac80211: Consolidate mesh path duplicated functions
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:33 -04:00
Javier Cardona
cd72e81748 mac80211: Consolidate {mesh,mpp}_path_flush into one function
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:33 -04:00
Javier Cardona
19c50b3dc5 mac80211: Don't iterate twice over all mpaths when once in sufficient
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:32 -04:00
Javier Cardona
ad99d14114 mac80211: Remove redundant mesh path expiration checks
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:32 -04:00
Javier Cardona
f5e50cd075 mac80211: Improve mpath state locking
No need to take the mpath state lock when an mpath is removed.
Also, no need checking the lock when reading mpath flags.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:32 -04:00
Javier Cardona
ece1a2e7e8 mac80211: Remove mesh paths when an interface is removed
When an interface is removed, the mesh paths associated with it should
also be removed.

This fixes a bug we observed when reloading a device driver module
without reloading mac80211s.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:32 -04:00
Javier Cardona
af089c15cb mac80211: Fix RCU pointer dereference in mesh_path_discard_frame()
Reported by Pedro Larbig (ASPj)

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:32 -04:00
Vivek Natarajan
f4b34b550a cfg80211/nl80211: Indicate roaming feature capability to userspace.
When the rssi of the current AP drops, both wpa_supplicant and the
firmware may do a background scan to find a better AP and try to
associate. Since firmware based roaming is faster, inform
wpa_supplicant to avoid roaming and let the firmware decide to
roam if necessary.

For fullmac drivers like ath6kl, it is just enough to provide the
ESSID and the firmware will decide on the BSSID. Since it is not
possible to do pre-auth during roaming for fullmac drivers, the
wpa_supplicant needs to completely disconnect with the old AP and
reconnect with the new AP. This consumes lot of time and it is
better to leave the roaming decision to the firmware.

Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:31 -04:00
Felix Fietkau
f0425beda4 mac80211: retry sending failed BAR frames later instead of tearing down aggr
Unfortunately failed BAR tx attempts happen more frequently than I
expected, and the resulting aggregation teardowns cause performance
issues, as the aggregation session does not always get re-established
properly.
Instead of tearing down the entire aggr session, we can simply store the
SSN of the last failed BAR tx attempt, wait for the first successful
tx status event, and then send another BAR with the same SSN.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:30 -04:00
Javier Cardona
2cca397f76 mac80211: Defer tranmission of mesh path errors
Under failure conditions, the mesh stack sends PERR messages to the
previous sender of the failed frame.  This happens in the tx feedback
path, in which the transmission queue lock may be taken.  Avoid a
deadlock by sending the path error via the pending queue.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 15:42:29 -04:00
John W. Linville
b4d3de8ca2 Merge branch 'master' of git://git.infradead.org/users/linville/wireless-next into for-davem 2011-09-13 15:41:16 -04:00
Johannes Berg
4bae7d9769 mac80211: fix missing sta_lock in __sta_info_destroy
Since my commit 34e895075e
("mac80211: allow station add/remove to sleep") there is
a race in mac80211 when it clears the TIM bit because a
sleeping station disconnected, the spinlock isn't held
around the relevant code any more. Use the right API to
acquire the spinlock correctly.

Cc: stable@kernel.org [2.6.34+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13 14:18:38 -04:00
Linus Torvalds
0d20fbbe82 Merge branch 'for-linus' of git://ceph.newdream.net/git/ceph-client
* 'for-linus' of git://ceph.newdream.net/git/ceph-client:
  libceph: fix leak of osd structs during shutdown
  ceph: fix memory leak
  ceph: fix encoding of ino only (not relative) paths
  libceph: fix msgpool
2011-09-09 15:48:34 -07:00
Joe Perches
320f422f62 batman-adv: Remove unnecessary OOM logging messages
Removing unnecessary messages saves code and text.

Site specific OOM messages are duplications of a generic MM
out of memory message and aren't really useful, so just
delete them.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:52:30 +02:00
Sven Eckelmann
45485ad7d2 batman-adv: update internal version number
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:52:19 +02:00
Marek Lindner
b9dacc521f batman-adv: agglomerate all batman iv ogm sending functions in the batman iv file
In the process the batman iv OGM aggregation code could be merged
into the batman iv code base which makes the separate aggregation
files superfluous.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:44:41 +02:00
Marek Lindner
d0b9fd89c2 batman-adv: move routing packet initialization into corresponding file
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:39:06 +02:00
Marek Lindner
fc95727564 batman-adv: agglomerate all batman iv ogm processing functions in a single file
In preparation of the upcoming improved routing algorithm the code based has
to be re-organized to allow choosing the routing algorithm at compile time.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:39:06 +02:00
Marek Lindner
b6da4bf5d7 batman-adv: rename all instances of batman_packet to batman_ogm_packet
The follow-up routing code changes are going to introduce additional
routing packet types which make this distinction necessary.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:37:51 +02:00
Aneesh Kumar K.V
b49d8b5d70 net/9p: Fix kernel crash with msize 512K
With msize equal to 512K (PAGE_SIZE * VIRTQUEUE_NUM), we hit multiple
crashes. This patch fix those.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-09-06 08:17:15 -05:00
Allan Stephens
4b3743ef2c tipc: Ensure congested links receive bearer status updates
Modifies code that disables a bearer to ensure that all of its links
are deleted, not just its uncongested links. Similarly, modifies code
that blocks a bearer to ensure that all of its links are reset, not
just its uncongested links.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
a0f40f02ef tipc: Prevent rounding issues when saving connect timeout option
Saves a socket's TIPC_CONN_TIMEOUT socket option value in its original
form (milliseconds), rather than jiffies. This ensures that the exact
value set using setsockopt() is always returned by getsockopt(), without
being subject to rounding issues introduced by a ms->jiffies->ms
conversion sequence.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
ff60af8c16 tipc: Eliminate redundant check when sending messages
Eliminates code in tipc_send_buf_fast() that handles messages
sent to a destination on the current node, since the only caller
of the routine only passes in messages destined for other nodes.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
0f38513d22 tipc: Remove obsolete congestion handling when sending a broadcast NACK
Eliminates obsolete code that handles broadcast bearer congestion when
the broadast link sends a NACK message, since the broadcast pseudo-bearer
never becomes blocked.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
9f6bdcd428 tipc: Discard incoming broadcast messages that are unexpected
Modifies TIPC's incoming broadcast packet handler to discard messages
that cannot legally be sent over the broadcast link, including:

- broadcast protocol messages that do no contain state information
- payload messages that are not named multicast messages
- any other form of message except for bundled messages, fragmented
  messages, and name distribution messages.

These checks are needed to prevent TIPC from handing an unexpected
message to a routine that isn't prepared to handle it, which could
lead to incorrect processing (up to and including invalid memory
references caused by attempts to access message fields that aren't
present in the message).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
693d03ae3c tipc: Remove deferred queue head caching during broadcast message reception
Modifies TIPC's incoming broadcast packet handler so that it no longer
pre-reads information about the deferred packet queue, since the cached
value is unreliable once the associated node lock has been released.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
5d3c488dfe tipc: Fix node lock problems during broadcast message reception
Modifies TIPC's incoming broadcast packet handler to ensure that the
node lock associated with the sender of the packet is held whenever
node-related data structure fields are accessed. The routine is also
restructured with a single exit point, making it easier to ensure
the node lock is properly released and the incoming packet is properly
disposed of.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
169073db44 tipc: Prevent broadcast link stalling when another node fails
Ensure that broadcast link messages that have not been acknowledged
by a newly failed node do not get an implied acknowledgement until the
failed node is removed from the broadcast link's map of reachable nodes.

Previously, a race condition allowed a new broadcast link message to be
sent after the implicit acknowledgement processing was completed, but
before the map of reachable nodes was updated, resulting in the message
having an expected acknowledgement count that required the failed node
to explicitly acknowledge the message. Since this would never occur
the new message would remain in the broadcast link's transmit queue
forever, eventually causing the link to become congested and "stall".
Delaying the implicit acknowledgement processing until after the update
of the map of reachable nodes eliminates this race condition and prevents
stalling.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
c5bd4d85d3 tipc: Enhance cleanup of broadcast link when contact with node is lost
Enhances cleanup of broadcast link-related information when contact
with a node is lost.

1) All broadcast link-related cleanup now occurs only if the lost node
   was capable of communicating over the broadcast link.

2) Following cleanup, the lost node is marked as no longer supporting
   the broadcast link, ensuring that any remaining broadcast messages
   received from that node prior to the re-establishment of a normal
   communication link are ignored.

Thanks to Surya [Suryanarayana.Garlapati@emerson.com] for contributing
a prototype version of this patch.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
23f0ff906a tipc: Remove non-executable code to handle broadcast bearer congestion
Eliminates code associated with the sending of unsent broadcast link
traffic when the broadcast pseudo-bearer becomes unblocked following a
temporary congestion situation. This code is non-executable because the
broadcast pseudo-bearer never becomes blocked [see tipc_bcbearer_send()].

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
2ff9f924a5 tipc: Cosmetic changes to broadcast bearer send routine
Updates the comments in the broadcast bearer send routine to more
accurately describe the processing done by the routine. Also replaces
the improper use of a TIPC payload message error status symbol (in a place
that has nothing to do with such errors) with its numeric equivalent.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
2e2d9be845 tipc: Update obsolete references to multicast link
Updates TIPC's broadcast link in a couple of places that were missed
during the transition from its former name ("multicast-link") to its
current name ("broadcast-link"). These changes are essentially cosmetic
and do not affect the overall operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
641c218d12 tipc: Enhance filtering of out-dated link reset messages
Ensure TIPC ignores an out-dated link reset message whose session
number predates the current session number. (Previously, TIPC only
ignored an out-date reset message whose session number was equal
to the current link session number.)

Out-dated link reset messages should not occur under normal circumstances;
however, they can be generated if a link endpoint is unable to send a
link reset message right away and queues it for later delivery, but the
queued message is not sent until after the link is established.

Thanks to Laser [gotolaser@gmail.com] for diagnosing the problem and
contributing a prototype patch.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
f882cb7684 tipc: Initialize peer session field of newly created link endpoint
Initializes the peer session number field of a newly created link
endpoint to an invalid value. This eliminates the remote possibility
that it will accidentally match the session number used by the peer
the first time the link is activated, and cause the link to ignore
a valid RESET message.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
062b4c99fe tipc: Display meaningful peer interface name during link creation
Sets the peer interface portion of the name of a newly created link
endpoint to "unknown". This ensures that state and statistics information
can be properly displayed during the time between the link endpoint's
creation and the time handshaking with its peer is completed.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
ed33a9c4e3 tipc: Eliminate obsolete filter for unexpected unicast messages
Removes a test that ensures unicast link endpoints discard an incoming
message if it will not be consumed by the node itself and cannot be
forwarded to another node, since the preceding test already ensures that
the message is destined for this node and single-cluster TIPC no longer
performs message forwarding.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
5adeb17c93 tipc: Remove obsolete manipulation of message re-route count field
Eliminates code that increments and validates the re-route count field
of payload messages, since the elimination of multi-cluster support
means that it is no longer necessary for TIPC to forward incoming messages
to another node. (The obsolete code was incorrect anyway, since it
incorrectly incremented the re-route count field of messages that
originated on the node that forwarded the message.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Sage Weil
aca420bc51 libceph: fix leak of osd structs during shutdown
We want to remove all OSDs, not just those on the idle LRU.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-31 15:22:46 -07:00
Eric Dumazet
29c486df6a net: ipv4: relax AF_INET check in bind()
commit d0733d2e29 (Check for mistakenly passed in non-IPv4 address)
added regression on legacy apps that use bind() with AF_UNSPEC family.

Relax the check, but make sure the bind() is done on INADDR_ANY
addresses, as AF_UNSPEC has probably no sane meaning for other
addresses.

Bugzilla reference : https://bugzilla.kernel.org/show_bug.cgi?id=42012

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-and-bisected-by: Rene Meier <r_meier@freenet.de>
CC: Marcus Meissner <meissner@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30 18:57:00 -04:00
David S. Miller
7858241655 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2011-08-30 17:43:56 -04:00
Maciej Żenczykowski
ec0506dbe4 net: relax PKTINFO non local ipv6 udp xmit check
Allow transparent sockets to be less restrictive about
the source ip of ipv6 udp packets being sent.

Google-Bug-Id: 5018138
Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: "Erik Kline" <ek@google.com>
CC: "Lorenzo Colitti" <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30 17:39:01 -04:00
Jozsef Kadlecsik
bb9fc37358 netfilter: nf_ct_tcp: wrong multiplication of TCPOLEN_TSTAMP_ALIGNED in tcp_sack skips fastpath
The wrong multiplication of TCPOLEN_TSTAMP_ALIGNED by 4 skips the fast path
for the timestamp-only option. Bug reported by Michael M. Builov (netfilter
bugzilla #738).

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30 15:46:13 +02:00
Jozsef Kadlecsik
4a5cc84ae7 netfilter: nf_ct_tcp: fix incorrect handling of invalid TCP option
Michael M. Builov reported that in the tcp_options and tcp_sack functions
of netfilter TCP conntrack the incorrect handling of invalid TCP option
with too big opsize may lead to read access beyond tcp-packet or buffer
allocated on stack (netfilter bugzilla #738). The fix is to stop parsing
the options at detecting the broken option.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30 15:45:10 +02:00
Sanket Shah
4c6e420966 netfilter: nf_ct_pptp: fix DNATed PPTP connection address translation
When both the server and the client are NATed, the set-link-info control
packet containing the peer's call-id field is not properly translated.

I have verified that it was working in 2.6.16.13 kernel previously but
due to rewrite, this scenario stopped working (Not knowing exact version
when it stopped working).

Signed-off-by: Sanket Shah <sanket.shah@elitecore.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30 15:23:03 +02:00
Florian Westphal
c6675233f9 netfilter: nf_queue: reject NF_STOLEN verdicts from userspace
A userspace listener may send (bogus) NF_STOLEN verdict, which causes skb leak.

This problem was previously fixed via
64507fdbc2 (netfilter:
nf_queue: fix NF_STOLEN skb leak) but this had to be reverted because
NF_STOLEN can also be returned by a netfilter hook when iterating the
rules in nf_reinject.

Reject userspace NF_STOLEN verdict, as suggested by Michal Miroslaw.

This is complementary to commit fad5444043
(netfilter: avoid double free in nf_reinject).

Cc: Julian Anastasov <ja@ssi.bg>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30 15:01:20 +02:00
John W. Linville
817a53d986 mac80211: refactor skb copy to failq in mesh_path_move_to_queue
This seems a bit less awkward...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29 15:25:28 -04:00
Peter Huewe
b38de31ffa net/mac80211/debugfs: Convert to kstrou8_from_user
This patch replaces the code for getting an number from a
userspace buffer by a simple call to kstrou8_from_user.
This makes it easier to read and less error prone.

Since the old buffer was only 10 bytes long and the value is masked by a
nibble-mask anyway, we don't need to use kstrtoul but rather kstrtou8.

Kernel Version: v3.0-rc2

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29 15:25:28 -04:00
John W. Linville
ba6e5eb107 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2011-08-29 14:52:20 -04:00
Joe Perches
7ac2ed0cee caif: Remove OOM messages, use kzalloc
Remove per site OOM messages because they duplicate
the generic mm subsystem OOM message.

Use kzalloc instead of kmalloc/memset
when next to the OOM message removals.

Reduces object size (allyesconfig ~2%)

$ size -t drivers/net/caif/built-in.o.old net/caif/built-in.o.old
   text	   data	    bss	    dec	    hex	filename
  32297	    700	   8224	  41221	   a105	drivers/net/caif/built-in.o.old
  72159	   1317	  20552	  94028	  16f4c	net/caif/built-in.o.old
 104456	   2017	  28776	 135249	  21051	(TOTALS)
$ size -t drivers/net/caif/built-in.o.new net/caif/built-in.o.new
   text	   data	    bss	    dec	    hex	filename
  31975	    700	   8184	  40859	   9f9b	drivers/net/caif/built-in.o.new
  70748	   1317	  20152	  92217	  16839	net/caif/built-in.o.new
 102723	   2017	  28336	 133076	  207d4	(TOTALS)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-28 17:16:13 -04:00
Eric Dumazet
363437f40a net_sched: sfb: optimize enqueue on full queue
In case SFB queue is full (hard limit reached), there is no point
spending time to compute hash and maximum qlen/p_mark.

We instead just early drop packet.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26 12:55:18 -04:00
Eric Dumazet
e9278a475f netpoll: fix incorrect access to skb data in __netpoll_rx
__netpoll_rx() doesnt properly handle skbs with small header

pskb_may_pull() or pskb_trim_rcsum() can change skb->data, we must
reload it.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26 12:49:04 -04:00
chetan loke
bc59ba3991 af_packet: Prefixed tpacket_v3 structs to avoid name space collision
structs introduced in tpacket_v3 implementation are prefixed with 'tpacket'
to avoid namespace collision.

Compile tested.

Signed-off-by: Chetan Loke <loke.chetan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26 12:38:44 -04:00
Eliad Peller
9533b4ac86 mac80211: add uapsd_queues and max_sp params fields
Add uapsd_queues and max_sp fields to ieee80211_sta.
These fields might be needed by low-level drivers in
order to configure the AP.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 10:47:56 -04:00
Eliad Peller
c75786c9ef nl80211/cfg80211: add STA WME parameters
Add new NL80211_ATTR_STA_WME nested attribute that contains
wme params needed by the low-level driver (uapsd_queues and
max_sp).

Add these params to the station_parameters struct as well.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 10:47:56 -04:00
Arik Nemtsov
a21fa87e3a mac80211: allow action frames with unknown BSSID in GO mode
When operating as a P2P GO, we receive some P2P action frames where the
BSSID is set to the peer MAC address. Specifically, this occurs for
invitation responses. These are valid action frames and they should be
passed up.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 10:47:56 -04:00
Guy Eilam
2a33bee275 mac80211: fix race condition between assoc_done and first EAP packet
When associating to an AP, the station might miss the first EAP
packet that the AP sends due to a race condition between the association
success procedure and the rx flow in mac80211.
In such cases, the packet might fall in ieee80211_rx_h_check due to
the fact that the relevant rx->sta wasn't allocated yet.
Allocation of the relevant station info struct before actually
sending the association request and setting it with a new
dummy_sta flag solve this problem.
The station will accept only EAP packets from the AP while it
is in the pre-association/dummy state.
This dummy station entry is not seen by normal sta_info_get()
calls, only by sta_info_get_bss_rx().
The driver is not notified for the first insertion of the
dummy station. The driver is notified only after the association
is complete and the dummy flag is removed from the station entry.
That way, all the rest of the code flow should be untouched by
this change.

Signed-off-by: Guy Eilam <guy@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 10:47:55 -04:00
Guy Eilam
8c71df7a2f mac80211: refactor sta_info_insert_rcu to 3 main stages
Divided the sta_info_insert_rcu function to 3 mini-functions:
sta_info_insert_check - the initial checks done when inserting
a new station
sta_info_insert_ibss - the function that handles the station
addition for IBSS interfaces
sta_info_insert_non_ibss - the function that handles the station
addition in other cases

The outer API was not changed.
The refactoring was done for better usage of the different
stages in the station addition in new scenarios added
in the next commit.

Signed-off-by: Guy Eilam <guy@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 10:47:55 -04:00
Thomas Pedersen
c613366113 mac80211: mesh gate fixes
Since a v1 of the mesh gate series was accidentally applied, this patch
contains the changes in v2.

These are:
	- automatically make mesh gate a root node.
	- use TU_TO_EXP_TIME macro.
	- initialize timer instead of checking for NULL timer function.
	- cleanups.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 10:39:23 -04:00
John W. Linville
e2e6be56df Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2011-08-26 10:33:51 -04:00
Jiri Slaby
0b058353ab TTY: use tty_wait_until_sent_from_close in other drivers
Let's use the newly added helper to avoid stalls in drivers which are
not yet ported to tty_port helpers.

Those which are broken (call tty_wait_until_sent with irqs disabled)
are left untouched. They are in a deeper trouble than we are trying to
solve here. This includes amiserial, 68328serial, 68360serial and
crisv10.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25 09:00:42 -07:00
Jean Pihet
e8db0be124 PM QoS: Move and rename the implementation files
The PM QoS implementation files are better named
kernel/power/qos.c and include/linux/pm_qos.h.

The PM QoS support is compiled under the CONFIG_PM option.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:03 +02:00
Mathieu Desnoyers
bc909d9ddb sendmmsg/sendmsg: fix unsafe user pointer access
Dereferencing a user pointer directly from kernel-space without going
through the copy_from_user family of functions is a bad idea. Two of
such usages can be found in the sendmsg code path called from sendmmsg,
added by

commit c71d8ebe7a upstream.
commit 5b47b8038f183b44d2d8ff1c7d11a5c1be706b34 in the 3.0-stable tree.

Usages are performed through memcmp() and memcpy() directly. Fix those
by using the already copied msg_sys structure instead of the __user *msg
structure. Note that msg_sys can be set to NULL by verify_compat_iovec()
or verify_iovec(), which requires additional NULL pointer checks.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
CC: Anton Blanchard <anton@samba.org>
CC: David S. Miller <davem@davemloft.net>
CC: stable <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:45:03 -07:00
Tim Chen
0856a30409 Scm: Remove unnecessary pid & credential references in Unix socket's send and receive path
Patch series 109f6e39..7361c36c back in 2.6.36 added functionality to
allow credentials to work across pid namespaces for packets sent via
UNIX sockets.  However, the atomic reference counts on pid and
credentials caused plenty of cache bouncing when there are numerous
threads of the same pid sharing a UNIX socket.  This patch mitigates the
problem by eliminating extraneous reference counts on pid and
credentials on both send and receive path of UNIX sockets. I found a 2x
improvement in hackbench's threaded case.

On the receive path in unix_dgram_recvmsg, currently there is an
increment of reference count on pid and credentials in scm_set_cred.
Then there are two decrement of the reference counts.  Once in scm_recv
and once when skb_free_datagram call skb->destructor function
unix_destruct_scm.  One pair of increment and decrement of ref count on
pid and credentials can be eliminated from the receive path.  Until we
destroy the skb, we already set a reference when we created the skb on
the send side.

On the send path, there are two increments of ref count on pid and
credentials, once in scm_send and once in unix_scm_to_skb.  Then there
is a decrement of the reference counts in scm_destroy's call to
scm_destroy_cred at the end of unix_dgram_sendmsg functions.   One pair
of increment and decrement of the reference counts can be removed so we
only need to increment the ref counts once.

By incorporating these changes, for hackbench running on a 4 socket
NHM-EX machine with 40 cores, the execution of hackbench on
50 groups of 20 threads sped up by factor of 2.

Hackbench command used for testing:
./hackbench 50 thread 2000

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:41:13 -07:00
Michio Honda
6af29ccc22 sctp: Bundle HEAERTBEAT into ASCONF_ACK
With this patch a HEARTBEAT chunk is bundled into the ASCONF-ACK
for ADD IP ADDRESS, confirming the new destination as quickly as
possible.

Signed-off-by: Michio Honda <micchie@sfc.wide.ad.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:41:13 -07:00
Michio Honda
f207c050fb sctp: HEARTBEAT negotiation after ASCONF
This patch fixes BUG that the ASCONF receiver transmits DATA chunks
to the newly added UNCONFIRMED destination.

Signed-off-by: Michio Honda <micchie@sfc.wide.ad.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:41:09 -07:00
Nandita Dukkipati
a262f0cdf1 Proportional Rate Reduction for TCP.
This patch implements Proportional Rate Reduction (PRR) for TCP.
PRR is an algorithm that determines TCP's sending rate in fast
recovery. PRR avoids excessive window reductions and aims for
the actual congestion window size at the end of recovery to be as
close as possible to the window determined by the congestion control
algorithm. PRR also improves accuracy of the amount of data sent
during loss recovery.

The patch implements the recommended flavor of PRR called PRR-SSRB
(Proportional rate reduction with slow start reduction bound) and
replaces the existing rate halving algorithm. PRR improves upon the
existing Linux fast recovery under a number of conditions including:
  1) burst losses where the losses implicitly reduce the amount of
outstanding data (pipe) below the ssthresh value selected by the
congestion control algorithm and,
  2) losses near the end of short flows where application runs out of
data to send.

As an example, with the existing rate halving implementation a single
loss event can cause a connection carrying short Web transactions to
go into the slow start mode after the recovery. This is because during
recovery Linux pulls the congestion window down to packets_in_flight+1
on every ACK. A short Web response often runs out of new data to send
and its pipe reduces to zero by the end of recovery when all its packets
are drained from the network. Subsequent HTTP responses using the same
connection will have to slow start to raise cwnd to ssthresh. PRR on
the other hand aims for the cwnd to be as close as possible to ssthresh
by the end of recovery.

A description of PRR and a discussion of its performance can be found at
the following links:
- IETF Draft:
    http://tools.ietf.org/html/draft-mathis-tcpm-proportional-rate-reduction-01
- IETF Slides:
    http://www.ietf.org/proceedings/80/slides/tcpm-6.pdf
    http://tools.ietf.org/agenda/81/slides/tcpm-2.pdf
- Paper to appear in Internet Measurements Conference (IMC) 2011:
    Improving TCP Loss Recovery
    Nandita Dukkipati, Matt Mathis, Yuchung Cheng

Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:40:40 -07:00
chetan loke
f6fb8f100b af-packet: TPACKET_V3 flexible buffer implementation.
1) Blocks can be configured with non-static frame-size.
2) Read/poll is at a block-level(as opposed to packet-level).
3) Added poll timeout to avoid indefinite user-space wait on idle links.
4) Added user-configurable knobs:
   4.1) block::timeout.
   4.2) tpkt_hdr::sk_rxhash.

Changes:
C1) tpacket_rcv()
    C1.1) packet_current_frame() is replaced by packet_current_rx_frame()
          The bulk of the processing is then moved in the following chain:
          packet_current_rx_frame()
            __packet_lookup_frame_in_block
              fill_curr_block()
              or
                retire_current_block
                dispatch_next_block
              or
              return NULL(queue is plugged/paused)

Signed-off-by: Chetan Loke <loke.chetan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:40:40 -07:00
Alexander Smirnov
44331fe2aa IEEE802.15.4: 6LoWPAN basic support
This patch provides base support for transmission of IPv6 packets as
well as the formation of IPv6 link-local addresses and statelessly
autoconfigured addresses on top of IEEE 802.15.4 networks.

For more information please look at the RFC4944 "Compression Format
for IPv6 Datagrams in Low Power and Losst Networks (6LoWPAN).

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:36:06 -07:00
Eric Dumazet
20e6074eb8 arp: fix rcu lockdep splat in arp_process()
Dave Jones reported a lockdep splat triggered by an arp_process() call
from parp_redo().

Commit faa9dcf793 (arp: RCU changes) is the origin of the bug, since
it assumed arp_process() was called under rcu_read_lock(), which is not
true in this particular path.

Instead of adding rcu_read_lock() in parp_redo(), I chose to add it in
neigh_proxy_process() to take care of IPv6 side too.

 ===================================================
 [ INFO: suspicious rcu_dereference_check() usage. ]
 ---------------------------------------------------
 include/linux/inetdevice.h:209 invoked rcu_dereference_check() without
protection!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 4 locks held by setfiles/2123:
  #0:  (&sb->s_type->i_mutex_key#13){+.+.+.}, at: [<ffffffff8114cbc4>]
walk_component+0x1ef/0x3e8
  #1:  (&isec->lock){+.+.+.}, at: [<ffffffff81204bca>]
inode_doinit_with_dentry+0x3f/0x41f
  #2:  (&tbl->proxy_timer){+.-...}, at: [<ffffffff8106a803>]
run_timer_softirq+0x157/0x372
  #3:  (class){+.-...}, at: [<ffffffff8141f256>] neigh_proxy_process
+0x36/0x103

 stack backtrace:
 Pid: 2123, comm: setfiles Tainted: G        W
3.1.0-0.rc2.git7.2.fc16.x86_64 #1
 Call Trace:
  <IRQ>  [<ffffffff8108ca23>] lockdep_rcu_dereference+0xa7/0xaf
  [<ffffffff8146a0b7>] __in_dev_get_rcu+0x55/0x5d
  [<ffffffff8146a751>] arp_process+0x25/0x4d7
  [<ffffffff8146ac11>] parp_redo+0xe/0x10
  [<ffffffff8141f2ba>] neigh_proxy_process+0x9a/0x103
  [<ffffffff8106a8c4>] run_timer_softirq+0x218/0x372
  [<ffffffff8106a803>] ? run_timer_softirq+0x157/0x372
  [<ffffffff8141f220>] ? neigh_stat_seq_open+0x41/0x41
  [<ffffffff8108f2f0>] ? mark_held_locks+0x6d/0x95
  [<ffffffff81062bb6>] __do_softirq+0x112/0x25a
  [<ffffffff8150d27c>] call_softirq+0x1c/0x30
  [<ffffffff81010bf5>] do_softirq+0x4b/0xa2
  [<ffffffff81062f65>] irq_exit+0x5d/0xcf
  [<ffffffff8150dc11>] smp_apic_timer_interrupt+0x7c/0x8a
  [<ffffffff8150baf3>] apic_timer_interrupt+0x73/0x80
  <EOI>  [<ffffffff8108f439>] ? trace_hardirqs_on_caller+0x121/0x158
  [<ffffffff814fc285>] ? __slab_free+0x30/0x24c
  [<ffffffff814fc283>] ? __slab_free+0x2e/0x24c
  [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81130cb0>] kfree+0x108/0x131
  [<ffffffff81204e74>] inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81204fc6>] selinux_d_instantiate+0x1c/0x1e
  [<ffffffff81200f4f>] security_d_instantiate+0x21/0x23
  [<ffffffff81154625>] d_instantiate+0x5c/0x61
  [<ffffffff811563ca>] d_splice_alias+0xbc/0xd2
  [<ffffffff811b17ff>] ext4_lookup+0xba/0xeb
  [<ffffffff8114bf1e>] d_alloc_and_lookup+0x45/0x6b
  [<ffffffff8114cbea>] walk_component+0x215/0x3e8
  [<ffffffff8114cdf8>] lookup_last+0x3b/0x3d
  [<ffffffff8114daf3>] path_lookupat+0x82/0x2af
  [<ffffffff8110fc53>] ? might_fault+0xa5/0xac
  [<ffffffff8110fc0a>] ? might_fault+0x5c/0xac
  [<ffffffff8114c564>] ? getname_flags+0x31/0x1ca
  [<ffffffff8114dd48>] do_path_lookup+0x28/0x97
  [<ffffffff8114df2c>] user_path_at+0x59/0x96
  [<ffffffff811467ad>] ? cp_new_stat+0xf7/0x10d
  [<ffffffff811469a6>] vfs_fstatat+0x44/0x6e
  [<ffffffff811469ee>] vfs_lstat+0x1e/0x20
  [<ffffffff81146b3d>] sys_newlstat+0x1a/0x33
  [<ffffffff8108f439>] ? trace_hardirqs_on_caller+0x121/0x158
  [<ffffffff812535fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff8150af82>] system_call_fastpath+0x16/0x1b

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:55:00 -07:00
Ian Campbell
804cf14ea5 net: xfrm: convert to SKB frag APIs
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:52:12 -07:00
Ian Campbell
408dadf03f net: ipv6: convert to SKB frag APIs
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:52:12 -07:00
Ian Campbell
aff65da0f1 net: ipv4: convert to SKB frag APIs
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:52:11 -07:00
Ian Campbell
ea2ab69379 net: convert core to skb paged frag APIs
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:52:11 -07:00
Eric Dumazet
22df13319d bridge: fix a possible use after free
br_multicast_ipv6_rcv() can call pskb_trim_rcsum() and therefore skb
head can be reallocated.

Cache icmp6_type field instead of dereferencing twice the struct
icmp6hdr pointer.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:49:24 -07:00
Yan, Zheng
4b275d7efa bridge: Pseudo-header required for the checksum of ICMPv6
Checksum of ICMPv6 is not properly computed because the pseudo header is not used.
Thus, the MLD packet gets dropped by the bridge.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reported-by: Ang Way Chuang <wcang@sfc.wide.ad.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:49:00 -07:00
Yan, Zheng
e05c4ad3ed mcast: Fix source address selection for multicast listener report
Should check use count of include mode filter instead of total number
of include mode filters.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:46:15 -07:00
Eric Dumazet
ec5efe7946 rps: support IPIP encapsulation
Skip IPIP header to get proper layer-4 information.

Like GRE tunnels, this only works if rxhash is not already provided by
the device itself (ethtool -K ethX rxhash off), to allow kernel compute
a software rxhash.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 16:13:55 -07:00
Samuel Ortiz
e8753043f9 NFC: Reserve tx head and tail room
We can have the NFC core layer allocating the tx head and tail
room for the drivers and avoid 1 or more SKBs copy on write on
the Tx path.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 14:41:44 -04:00
Javier Cardona
16dd7267f4 {nl,cfg,mac}80211: let userspace make meshif mesh gate
Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute,
which will advertise this mesh node as being a mesh gate.
NL80211_HWMP_ROOTMODE must be set or this will do nothing.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:43 -04:00
Javier Cardona
0507e159a2 {nl,cfg,mac}80211: let userspace set RANN interval
Allow userspace to set Root Announcement Interval for our mesh
interface. Also, RANN interval is now in proper units of TUs.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:43 -04:00
Javier Cardona
699403dbd4 {nl,mac}80211: add missing root mode meshconf entries
This fix allows userspace to mark a meshif as a root node.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:43 -04:00
Javier Cardona
5ee68e5b39 mac80211: mesh gate implementation
In this implementation, a mesh gate is a root node with a certain bit
set in its RANN flags. The mpath to this root node is marked as a path
to a gate, and added to our list of known gates for this if_mesh. Once a
path discovery process fails, we forward the unresolved frames to a
known gate. Thanks to Luis Rodriguez for refactoring and bug fix help.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:42 -04:00
Javier Cardona
00e3f25c85 mac80211: fix mesh path flushing
Previously, mpaths were never flushed since the mpath is not active once
we call this function.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:42 -04:00
Javier Cardona
a6965c44e9 mac80211: mesh locking fixes
mesh_queue_preq is invoked invoked from both user (work queue) and
softirq (timer) context, so the _bh version of spinlock needs to be
used. Also, the mpath->state_lock should be softirq safe as well.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:42 -04:00
Javier Cardona
86d7f9f35d mac80211: fix mpath timer NULL function
If we have an mpath whose timer has not been initialized, don't try to
delete it.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:42 -04:00
Javier Cardona
7646887a53 mac80211: improve mpath debugging
make hwmp_dbg print the relevant sdata->name by default and improve
formatting. Also add mpath_dbg macro for debugging of mesh path
operations.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 13:59:41 -04:00
David S. Miller
0e43182c0c Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge 2011-08-24 10:33:00 -07:00
Jason Baron
ffa10cb47a dynamic_debug: make netdev_dbg() call __netdev_printk()
Previously, if dynamic debug was enabled netdev_dbg() was using
dynamic_dev_dbg() to print out the underlying msg. Fix this by making
sure netdev_dbg() uses __netdev_printk().

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 18:23:06 -07:00
Eric Dumazet
11f3a6bdc2 bridge: fix a possible net_device leak
Jan Beulich reported a possible net_device leak in bridge code after
commit bb900b27a2 (bridge: allow creating bridge devices with netlink)

Reported-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22 16:49:56 -07:00
David S. Miller
7ae9ed8d32 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next 2011-08-22 14:47:43 -07:00
Jiri Pirko
0dfe178239 net: vlan: goto another_round instead of calling __netif_receive_skb
Now, when vlan tag on untagged in non-accelerated path is stripped from
skb, headers are reset right away. Benefit from that and avoid calling
__netif_receive_skb recursivelly and just use another_round.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22 12:43:22 -07:00
Thomas Pedersen
25d49e4d63 mac80211: update mesh path selection frame format
Make mesh path selection frames Mesh Action category, remove outdated
Mesh Path Selection category and defines, use updated reason codes, add
mesh_action_is_path_sel for readability, and update/correct path
selection IEs.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:46:00 -04:00
Thomas Pedersen
8db098507c mac80211: update mesh peering frame format
This patch updates the mesh peering frames to the format specified in
the recently ratified 802.11s standard. Several changes took place to
make this happen:

	- Change RX path to handle new self-protected frames
	- Add new Peering management IE
	- Remove old Peer Link IE
	- Remove old plink_action field in ieee80211_mgmt header

These changes by themselves would either break peering, or work by
coincidence, so squash them all into this patch.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:46:00 -04:00
Thomas Pedersen
54ef656b05 mac80211: update mesh peering frame codes
Have the mesh peering frames use the self-protected action and reason codes
specified in 802.11s and defined in ieee80211.h. Remove the local enums.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:46:00 -04:00
Thomas Pedersen
082ebb0c25 mac80211: fix mesh beacon format
Correct ordering of IEs in the mesh beacon while removing unneeded IEs
from mesh peering frames. Set privacy bit in capability info if security
is enabled. Add utility functions to aid in construction
of IEs and reduce code duplication.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:45:59 -04:00
Helmut Schaa
e69deded2b mac80211: Tear down BA session on BAR tx failure
As described at [1] some STAs (i.e. Intel 5100 Windows) can end up
correctly BlockAcking incoming frames without delivering them to user
space if a AMPDU subframe got lost and we don't flush the receipients
reorder buffer with a BlockAckReq. This in turn results in stuck
connections.

According to 802.11n-2009 it is not necessary to send a BAR to flush
the recepients RX reorder buffer but we still do that to be polite.

However, assume the following frame exchange:

AP -> STA, AMPDU (failed)
AP -> STA, BAR (failed)

The client in question then ends up in the same situation and won't
deliver frames to userspace anymore since we weren't able to flush
its reorder buffer.

This is not a hypothetical situation but I was able to observe this
exact behavior during a stress test between a rt2800pci AP and a Intel
5100 Windows client.

In order to work around this issue just tear down the BA session as
soon as a BAR failed to be TX'ed.

[1] http://comments.gmane.org/gmane.linux.kernel.wireless.general/66867

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:45:58 -04:00
Helmut Schaa
c1407b6cb2 wireless: Introduce defines for BAR TID_INFO & MULTI_TID fields
While at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:45:58 -04:00
John W. Linville
b38d355eaa Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c
	drivers/staging/ath6kl/os/linux/ar6000_drv.c
2011-08-22 14:28:50 -04:00
Stanislaw Gruszka
ecb4433550 mac80211: fix suspend/resume races with unregister hw
Do not call ->suspend, ->resume methods after we unregister wiphy. Also
delete sta_clanup timer after we finish wiphy unregister to avoid this:

WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0()
Hardware name: 6369CTO
ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211]
Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode]
Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19
Call Trace:
 [<c0454cfd>] warn_slowpath_common+0x6d/0xa0
 [<c05e05e5>] ? debug_print_object+0x85/0xa0
 [<c05e05e5>] ? debug_print_object+0x85/0xa0
 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30
 [<c05e05e5>] debug_print_object+0x85/0xa0
 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211]
 [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180
 [<c051175b>] kfree+0x8b/0x150
 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211]
 [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211]
 [<c068d959>] device_release+0x19/0x80
 [<c05d06ba>] kobject_release+0x7a/0x1c0
 [<c07646a8>] ? rtnl_unlock+0x8/0x10
 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211]
 [<c05d0640>] ? kobject_del+0x30/0x30
 [<c05d1a6d>] kref_put+0x2d/0x60
 [<c05d056d>] kobject_put+0x1d/0x50
 [<c08015f4>] ? mutex_lock+0x14/0x40
 [<c068d60f>] put_device+0xf/0x20
 [<c069716a>] dpm_resume+0xca/0x160
 [<c04912bd>] hibernation_snapshot+0xcd/0x260
 [<c04903df>] ? freeze_processes+0x3f/0x90
 [<c049151b>] hibernate+0xcb/0x1e0
 [<c048fdc0>] ? pm_async_store+0x40/0x40
 [<c048fe60>] state_store+0xa0/0xb0
 [<c048fdc0>] ? pm_async_store+0x40/0x40
 [<c05d0200>] kobj_attr_store+0x20/0x30
 [<c0575ea4>] sysfs_write_file+0x94/0xf0
 [<c051e26a>] vfs_write+0x9a/0x160
 [<c0575e10>] ? sysfs_open_file+0x200/0x200
 [<c051e3fd>] sys_write+0x3d/0x70
 [<c080959f>] sysenter_do_call+0x12/0x28

Cc: stable@kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22 14:21:40 -04:00
Marek Lindner
a943cac144 batman-adv: merge update_transtable() into tt related code
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:22 +02:00
Marek Lindner
267151cdfd batman-adv: reuse tt_len() to calculate tt buffer length
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
2011-08-22 15:16:22 +02:00
Antonio Quartulli
df6edb9e69 batman-adv: print client flags in the local/global transtables output
Since clients can have several flags on or off, this patches make them
appear in the local/global transtable output so that they can be checked
for debugging purposes.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:22 +02:00
Antonio Quartulli
3d393e4732 batman-adv: implement AP-isolation on the sender side
If a node has to send a packet issued by a WIFI client to another WIFI client,
the packet is dropped.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:21 +02:00
Antonio Quartulli
59b699cdee batman-adv: implement AP-isolation on the receiver side
When a node receives a unicast packet it checks if the source and the
destination client can communicate or not due to the AP isolation

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:20 +02:00
Antonio Quartulli
bc2790808a batman-adv: detect clients connected through a 802.11 device
Clients connected through a 802.11 device are now marked with the
TT_CLIENT_WIFI flag. This flag is also advertised with the tt
announcement.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:20 +02:00
Antonio Quartulli
015758d002 batman-adv: correct several typ0s in the comments
Several typos have been corrected and some sentences have been rephrased

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:19 +02:00
Antonio Quartulli
1a1f37d925 batman-adv: hash_add() has to discriminate on the return value
hash_add() returns 0 on success while returns -1 either on error and on
entry already present. The caller could use such information to select
its behaviour. For this reason it is useful that hash_add() returns -1
in case on error and returns 1 in case of entry already present.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:19 +02:00
Changli Gao
6461be3a54 net: Preserve ooo_okay when copying skb header
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20 14:20:49 -07:00
Daniel Schwierzeck
fbe5e29ec1 atm: br2684: Fix oops due to skb->dev being NULL
This oops have been already fixed with commit

    27141666b6

    atm: [br2684] Fix oops due to skb->dev being NULL

    It happens that if a packet arrives in a VC between the call to open it on
    the hardware and the call to change the backend to br2684, br2684_regvcc
    processes the packet and oopses dereferencing skb->dev because it is
    NULL before the call to br2684_push().

but have been introduced again with commit

    b6211ae7f2

    atm: Use SKB queue and list helpers instead of doing it by-hand.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20 14:13:05 -07:00
David S. Miller
823dcd2506 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net 2011-08-20 10:39:12 -07:00
Eric Dumazet
11fd165c68 sunrpc: use better NUMA affinities
Use NUMA aware allocations to reduce latencies and increase throughput.

sunrpc kthreads can use kthread_create_on_node() if pool_mode is
"percpu" or "pernode", and svc_prepare_thread()/svc_init_buffer() can
also take into account NUMA node affinity for memory allocations.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: "J. Bruce Fields" <bfields@fieldses.org>
CC: Neil Brown <neilb@suse.de>
CC: David Miller <davem@davemloft.net>
Reviewed-by: Greg Banks <gnb@fastmail.fm>
[bfields@redhat.com: fix up caller nfs41_callback_up]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-19 13:25:36 -04:00
Daniel Baluta
98e77438ae ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
IPV6_2292PKTOPTIONS is broken for 32-bit applications running
in COMPAT mode on 64-bit kernels.

The same problem was fixed for IPv4 with the patch:
ipv4: Fix ip_getsockopt for IP_PKTOPTIONS,
commit dd23198e58

Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com>
Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19 03:19:07 -07:00
Changli Gao
ae1511bf76 net: rps: support PPPOE session messages
Inspect the payload of PPPOE session messages for the 4 tuples to generate
skb->rxhash.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 23:23:47 -07:00
Changli Gao
1ff1986fc9 net: rps: support 802.1Q
For the 802.1Q packets, if the NIC doesn't support hw-accel-vlan-rx, RPS
won't inspect the internal 4 tuples to generate skb->rxhash, so this kind
of traffic can't get any benefit from RPS.

This patch adds the support for 802.1Q to RPS.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 22:07:54 -07:00
Jiri Pirko
c5114cd59d vlan: reset headers on accel emulation path
It's after all necessary to do reset headers here. The reason is we
cannot depend that it gets reseted in __netif_receive_skb once skb is
reinjected. For incoming vlanids without vlan_dev, vlan_do_receive()
returns false with skb != NULL and __netif_reveive_skb continues, skb is
not reinjected.

This might be good material for 3.0-stable as well

Reported-by: Mike Auty <mike.auty@gmail.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 21:29:27 -07:00
Jiri Pirko
b81693d914 net: remove ndo_set_multicast_list callback
Remove no longer used operation.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:22:03 -07:00
Jiri Pirko
afc4b13df1 net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:22:03 -07:00
Jiri Pirko
01789349ee net: introduce IFF_UNICAST_FLT private flag
Use IFF_UNICAST_FTL to find out if driver handles unicast address
filtering. In case it does not, promisc mode is entered.

Patch also fixes following drivers:
stmmac, niu: support uc filtering and yet it propagated
	ndo_set_multicast_list
bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set
	ndo_set_rx_mode but do not support uc filtering

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:21:27 -07:00
Jamal Hadi Salim
8919bc13e8 net_sched: fix port mirror/redirect stats reporting
When a redirected or mirrored packet is dropped by the target
device we need to record statistics.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:10:20 -07:00
Tom Herbert
c6865cb3cc rps: Inspect GRE encapsulated packets to get flow hash
Crack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on
in encapsulated packet.  Note that this is used only when the
__skb_get_rxhash is taken, in particular only when the device does
not compute provide the rxhash (ie. feature is disabled).

This was tested by creating a single GRE tunnel between two 16 core
AMD machines.  200 netperf TCP_RR streams were ran with 1 byte
request and response size.

Without patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs
With patch: 325896 tps, 50/90/99% latencies 603/848/1169

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:06:03 -07:00
Tom Herbert
e971b7225b rps: Infrastructure in __skb_get_rxhash for deep inspection
Basics for looking for ports in encapsulated packets in tunnels.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:06:03 -07:00
Tom Herbert
bdeab99191 rps: Add flag to skb to indicate rxhash is based on L4 tuple
The l4_rxhash flag was added to the skb structure to indicate
that the rxhash value was computed over the 4 tuple for the
packet which includes the port information in the encapsulated
transport packet.  This is used by the stack to preserve the
rxhash value in __skb_rx_tunnel.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:06:03 -07:00
Tom Herbert
792df22cd0 rps: Some minor cleanup in get_rps_cpus
Use some variables for clarity and extensibility.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:06:03 -07:00
Lionel Elie Mamane
c2bceb3d7f sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
sit tunnels (IPv6 tunnel over IPv4) do not implement the "tos inherit"
case to copy the IPv6 transport class byte from the inner packet to
the IPv4 type of service byte in the outer packet. By contrast, ipip
tunnels and GRE tunnels do.

This patch, adapted from the similar code in net/ipv4/ipip.c and
net/ipv4/ip_gre.c, implements that.

This patch applies to 3.0.1, and has been tested on that version.

Signed-off-by: Lionel Elie Mamane <lionel@mamane.lu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 16:28:55 -07:00
Ursula Braun
3881ac441f af_iucv: add HiperSockets transport
The current transport mechanism for af_iucv is the z/VM offered
communications facility IUCV. To provide equivalent support when
running Linux in an LPAR, HiperSockets transport is added to the
AF_IUCV address family. It requires explicit binding of an AF_IUCV
socket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV
is announced. An af_iucv specific transport header is defined
preceding the skb data. A small protocol is implemented for
connecting and for flow control/congestion management.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13 01:10:16 -07:00