Without FADVISE_KEEP_SIZE_BIT, we will try to recover file size
according to last non-hole block, so in fallocate(), we must set
FADVISE_KEEP_SIZE_BIT flag once we have preallocated block cross
EOF, instead of when all preallocation is success. Otherwise, file
size will be incorrect due to lack of this flag.
Simple testcase to reproduce this:
1. echo 2 > /sys/fs/f2fs/<device>/inject_type
2. echo 10 > /sys/fs/f2fs/<device>/inject_rate
3. run tests/generic/392
4. disable fault injection
5. do remount
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During block exchange in {insert,collapse,move}_range, page-block mapping
is unstable due to mapping moving or recovery, so there should be no
concurrent cache read operation rely on such mapping, nor cache write
operation to mess up block exchange.
So this patch let background GC be aware of that.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use a slightly easier way to calculate last_nid.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes, after running generic/270 of fstest, fsck reports summary
info and actual position of block address in direct node becoming
inconsistent.
The root cause is race in between __f2fs_replace_block and change_curseg
as below:
Thread A Thread B
- __clone_blkaddrs
- f2fs_replace_block
- __f2fs_replace_block
- segnoA = GET_SEGNO(sbi, blkaddrA);
- type = se->type:=CURSEG_HOT_DATA
- if (!IS_CURSEG(sbi, segnoA))
type = CURSEG_WARM_DATA
- allocate_data_block
- allocate_segment
- get_ssr_segment
- change_curseg(segnoA, CURSEG_HOT_DATA)
- change_curseg(segnoA, CURSEG_WARM_DATA)
- reset_curseg
- __set_sit_entry_type
- change se->type from CURSEG_HOT_DATA to CURSEG_WARM_DATA
So finally, hot curseg locates in segnoA, but type of segnoA becomes
CURSEG_WARM_DATA.
Then if we invoke __f2fs_replace_block(blkaddrB, blkaddrA, true, false),
as blkaddrA locates in segnoA, so we will move warm type curseg to segnoA,
then change its summary cache and writeback it to summary block.
But segnoA is used by hot type curseg too, once it moves or persist, it
will cover summary block content with inner old summary cache, result in
inconsistent status.
This patch tries to fix this issue by introduce global curseg lock to avoid
race in between __f2fs_replace_block and change_curseg.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit a468f0ef516f ("f2fs: use crc and cp version to determine
roll-forward recovery"), last caller of update_meta_page passing @src
with NULL is gone, so remove related dead code there.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs does not set the SB_I_VERSION flag, so the i_version will never
be incremented on write. It was recently changed to increment the
i_version on a quota write, which isn't necessary here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we are closing to trigger foreground GC, if there are only a few
of dirty metas, we can log these dirty metas in left space of opened
segments instead of triggering foreground GC.
With this patch, total count of foreground GC triggered by
test/generic/* of fstest suit reduce from 254 to 184.
So let's do the check before foreground GC anyway.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are some cases user didn't update SIT cache under this lock,
so let's use rw_semaphore instead of mutex to enhance concurrently
accessing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports hidden quota files in the system, which will be used for
Android. It requires up-to-date f2fs-tools later than v1.9.0.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds quota_ino feature infra to be used for quota files.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Make three modification for __update_nat_bits:
1. Take the codes of dealing the nat with nid 0 out of the loop
Such nat only needs to be dealt with once at beginning.
2. Use " nat_index == 0" instead of " start_nid == 0" to decide if it's the first nat block
It's better that we don't assume @start_nid is the first nid of the nat block it's in.
3. Use " if (nat_blk->entries[i].block_addr != NULL_ADDR)" to explicitly comfirm the value of block_addr
use constant to make sure the codes is right, even if the value of NULL_ADDR changes.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
modify for accurate fggc node io stat
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 5e443818fa0b2a2845561ee25bec181424fb2889
The commit should be reverted because call sequence of below two parts
of code must be kept:
a. update sit information, it needs to be updated before segment
allocation since latter allocation may trigger SSR, and SSR allocation
needs latest valid block information of all segments.
b. update segment status, it needs to be updated after segment allocation
since we can skip updating current opened segment status.
Fixes: 5e443818fa0b ("f2fs: handle dirty segments inside refresh_sit_entry")
Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: remove refresh_sit_entry function]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new function to move nid from one state to another.
Move operation is heavily used, by adding a new function for it
we can cut down some branches from several flow.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch exports min_ssr_segments threshold in sysfs to let user
control triggering SSR allocation flexibly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have supported to issue discard in specified range during fstrim,
it needs to return caller with successfully trimmed bytes in that
range instead of bytes of invalid blocks which are scanned in
checkpoint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support bio allocation error injection to simulate
out-of-memory test scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support get_page error injection to simulate
out-of-memory test scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It supports to extend reserved_blocks sysfs interface to be soft
threshold, which allows user configure it exceeding current available
user space. This patch also introduces a new sysfs interface called
current_reserved_blocks, which shows the current blocks that have
already been reserved.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes recovering incomplete xattr entries remaining in inline xattr
and xattr block, caused by any kind of errors.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, in product, more and more features based on file encryption were
introduced, their demand of xattr space is increasing, however, inline
xattr has fixed-size of 200 bytes, once inline xattr space is full, new
increased xattr data would occupy additional xattr block which may bring
us more space usage and performance regression during persisting.
In order to resolve above issue, it's better to expand inline xattr size
flexibly according to user's requirement.
So this patch introduces new filesystem feature 'flexible inline xattr',
and new mount option 'inline_xattr_size=%u', once mkfs enables the
feature, we can use the option to make f2fs supporting flexible inline
xattr size.
To support this feature, we add extra attribute i_inline_xattr_size in
inode layout, indicating that how many space inline xattr borrows from
block address mapping space in inode layout, by this, we can easily
locate and store flexible-sized inline xattr data in inode.
Inode disk layout:
+----------------------+
| .i_mode |
| ... |
| .i_ext |
+----------------------+
| .i_extra_isize |
| .i_inline_xattr_size |-----------+
| ... | |
+----------------------+ |
| .i_addr | |
| - block address or | |
| - inline data | |
+----------------------+<---+ v
| inline xattr | +---inline xattr range
+----------------------+<---+
| .i_nid |
+----------------------+
| node_footer |
| (nid, ino, offset) |
+----------------------+
Note that, we have to cnosider backward compatibility which reserved
inline_data space, 200 bytes, all the time, reported by Sheng Yong.
Previous inline data or directory always reserved 200 bytes in inode layout,
even if inline_xattr is disabled. In order to keep inline_dentry's structure
for backward compatibility, we get the space back only from inline_data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to call quota_intialize in f2fs_set_acl, f2fs_unlink,
and f2fs_rename.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds one sysfs entry to show # of dirty segments which can be
used for gc timing by user.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch replaces to use cp_error flag instead of RDONLY for quota off.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several assignments to variables that are redundant
as the values are never read when the variables are updated later
and so the redundant statements can be safely removed.
Cleans up clang warnings:
fs/f2fs/segment.c:923:19: warning: Value stored to 'p' during its initialization is never read
fs/f2fs/segment.c:2060:2: warning: Value stored to 'hint' is never read
fs/f2fs/segment.c:2353:2: warning: Value stored to 'start_block' is never read
fs/f2fs/segment.c:2354:2: warning: Value stored to 'end_block' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
All uses of timespec are deprecated, and this one is not particularly
useful, as the documented method for converting seconds to jiffies
is to multiply by 'HZ'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There may be extreme case as below:
For one section contains one segment, and there are total 100 segments
with 10% over-privision ratio in f2fs partition, fggc_threshold will
be rounded down to 460 instead of 460.8 as below caclulation:
sbi->fggc_threshold = div_u64((u64)(main_count - ovp_count) *
BLKS_PER_SEC(sbi), (main_count - resv_count));
If section usage is as:
60 segments which contain 460 valid blocks
40 segments which contain 462 valid blocks
As valid block number in all sections is large than fggc_threshold, so
none of them will be chosen as candidate due to incorrect fggc_threshold.
Let's just soften the term of choosing foreground GC candidates.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 4f31d26b0c17f2aae6a6afeb823a87e20671ab4b.
It turns out that we need to report error number if nothing was written.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes obosolete parameter for truncate_xattr_node.
Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If some abnormal users try lots of atomic write operations, f2fs is able to
produce pinned pages in the main memory which affects system performance.
This patch limits that as 20% over total memory size, and if f2fs reaches
to the limit, it will drop all the inmemory pages.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to update ctx->pos correctly when hitting hole in
directory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, for large directory, we just do readahead only once in
readdir(), readdir()'s performance may drop when traversing latter
blocks. In order to avoid this, relocate readahead codes to covering
all traverse flow.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch follows ext4 to allow readdir() in large empty directory to
be interrupted. Referenced commit of ext4: 1f60fbe72749 ("ext4: allow
readdir()'s of large empty directories to be interrupted").
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's skip entire non-exist area to speed up truncate_hole by
using get_next_page_offset.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there's some data written through inline data or dentry, we need to shouw
st_blocks. This fixes reporting zero blocks even though there is small written
data.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid link file for quotacheck]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When doing fault injection test, f2fs_evict_inode() didn't remove gdirty_list
which incurs a kernel panic due to wrong pointer access.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids dropping crypto key in f2fs_drop_inode, so we can guarantee
it happens only at evict_inode.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
last_disk_size could be wrong due to concurrently updating, so using
i_sem semaphore to make last_disk_size updating exclusive to fix this
issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In ->umount, once we drop remained discard entries, we should not
set CP_TRIMMED_FLAG with another checkpoint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__submit_discard_cmd may lead long latency due to exhaustion of I/O
request resource in block layer, so issuing all discard under cmd_lock
may lead to hangtask, in order to avoid that, let's reduce it's coverage.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are many different scenarios such as fstrim, umount, urgent or
background where we will issue discards, actually, they need use
different policy in aspect of io aware, discard granularity, delay
interval and so on. But now they just share one common discard policy,
so there will be race when changing policy in between these scenarios,
the interference of changing discard policy will be very serious.
This patch changes to split discard policy for different scenarios.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch wraps scattered optional parameters into discard policy as
below, later, with it we expect that we can adjust these parameters with
proper strategy in different scenario.
struct discard_policy {
unsigned int min_interval; /* used for candidates exist */
unsigned int max_interval; /* used for candidates not exist */
unsigned int max_requests; /* # of discards issued per round */
unsigned int io_aware_gran; /* minimum granularity discard not be aware of I/O */
bool io_aware; /* issue discard in idle time */
bool sync; /* submit discard with REQ_SYNC flag */
};
This patch doesn't change any logic of codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
