Commit Graph

697 Commits

Author SHA1 Message Date
Jason Lam
b20f010317 omap3: Add OMAP3 Stalker board LK-S defconfig
Add OMAP3 Stalker board LK-S defconfig.

Signed-off-by: Jason Lam <lzg@ema-tech.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:21:22 -07:00
kishore kadiyala
ebe6d428ed omap4: Enable HSMMC support
Enables HSMMC support for OMAP4430 defconfig

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:21:22 -07:00
Balaji T K
f9ea6cfb5a omap4: Enable RTC and regulator support
This patch enables RTC and regulator support on omap4430 sdp
platform. Also sync up the defconfig with latest kernel

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:21:21 -07:00
Santosh Shilimkar
baeb73e802 omap4: Add i2c board support on omap4430 sdp platform
This patch adds the i2c board support for OMAP4430 SDP platform.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:21:21 -07:00
Abraham Arce
2e5f51a539 OMAP4: Networking: Defconfig Support
Enable KS8851 SPI support +

 Networking Support
  - Packet Socket
  - TCP/IP

 Network Filesystems
  - NFS Client
  - Root Filesystem on NFS

Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
Tony Lindgren
df760137ad Merge branch 'omap-boards' into omap-for-linus 2010-05-20 11:07:23 -07:00
Janusz Krzysztofik
754b8e6534 OMAP1: Amstrad Delta: modify defconfig for external keyboardsupport
The patch adds a CONFIG directive required for supporting the Amstrad Delta
connected external keyboard by default.

Created and tested against linux-omap master,
commit 104a77440f05430f29f9d3f4ecb88c1536819585 dated 2010-04-27.

Works on top of PATCH v4 4/5(7), "input: serio: add support for Amstrad Delta
serial keyboard port".

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:02:43 -07:00
Sriram
38e473a84e AM3517: defconfig update to enable EMAC support
Update the default configuration for AM3517EVM to enable
support for EMAC peripheral.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Sriram
e72b9b8072 can: ti_hecc: Enable CAN support on AM3517
Modify the default kernel configuration on AM3517 to enable CAN.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:46 -07:00
Thomas Weber
a29b8204d2 omap: Devkit8000: Update default configuration
This patch updates the new default configuration for the Devkit8000.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Janusz Krzysztofik
d22ae836d6 omap1: amsdelta: defconfig updates
The patch provides the following ams_delta_defconfig updates:
- explicitly select preemptable RCU,
- replace outdated CONFIG_LBD and CONFIG_LSF options with CONFIG_LBDAF,
- activate support for LCD contrast setting (new in 2.6.34),
- turn off verbose bug reporting for smaller kernel.

Created and tested against linux-2.6.34-rc3.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Roger Quadros
2c59ff5501 OMAP: RX51: Update board defconfig
Add LCD, Boot-up logo, framebuffer console, Keypad
and Power button support

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18 15:06:05 +03:00
Vaibhav Hiremath
14ec4740ff OMAP: AM3517: Enable DSS2 in AM3517EVM defconfig
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tomi.valkeinen@nokia.com: removed the board file changes]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18 14:14:28 +03:00
Vaibhav Hiremath
91e8512e75 OMAP: Enable DSS2 in OMAP3EVM defconfig
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tomi.valkeinen@nokia.com: removed the board file changes]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18 14:14:28 +03:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King
c39e52a793 Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', 'omap', 'pxa', 'spear' and 'versatile' into devel
Conflicts:
	arch/arm/Makefile
	arch/arm/common/Makefile
	arch/arm/mm/Kconfig
2010-05-17 11:53:39 +01:00
Russell King
74b8721099 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2010-05-13 09:56:24 +01:00
Haojian Zhuang
d24123bfae [ARM] mmp: update mmp2 defconfig
Enable MAX8649 & MAX8925 regulator, dynamic debug, Marvell Jasper platform.
Disable DNOTIFY, MAX8660 regulator, 88pm860x PMIC.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:05 +02:00
Haojian Zhuang
66b1964750 [ARM] mmp: enable L2 in mmp2
Enable Tauros2 L2 in mmp2. Tauros2 L2 is shared in Marvell ARM cores.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:04 +02:00
Russell King
257dab8141 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2010-05-06 08:16:34 +01:00
Stefan Schmidt
12145cae4d [ARM] pxa/imote2: Fix iMote2 defconfig
- Bring in a CMDLINE that actually works and prints to the right tty
- Compile-in JFFS2 to boot into rootfs
- Remove unneeded options for Bluetooth and radio
- Disable CPU_FREQ as it makes the flash driver fail

Thanks Jonathan for spotting what I messed up.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Tony Lindgren
aea561359a omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig
Looks like CONFIG_FB_OMAP prevents somehow mounting root on MMC
at least on zoom3 for multi-omap. Disable CONFIG_FB until the
omap FB code is fixed.

This allows booting omap3_defconfig on various omaps. Tested on
2420-n8x0, 3430-n900, 3630-zoom3 and 4430-blaze. Note that n8x0
still has issues with starting user space because of TLS and
VFP.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-05 11:11:09 -07:00
Tony Lindgren
df5d9411f9 omap2/3/4: Disable CONFIG_PM_VERBOSE in omap3_defconfig
It's too noisy.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-04 13:19:16 -07:00
Tony Lindgren
0c463d09f4 omap2/3/4: Update PMIC options for TWL and Menelaus chips
These are needed for mounting root on MMC on many boards.
Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the
system from running with external watchdogs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-04 13:19:16 -07:00
Tony Lindgren
75eaf1eaa8 omap2/3/4: Make omap3_defconfig usable on Nokia boards
The bootloader on Nokia boards does not support updating
the kernel cmdline. For the other boards, the bootloader
provided cmdline will be used instead.

To mount root on n8x0, compile in also the MMC_OMAP.
It seems that the best way to mount root with the
new kernels on Nokia boards is to mount root on mmcblk0p2.

Note that n8x0 current has several issues booting with
omap3_defconfig: The bootloader has a 2MB limit for loading
kernels, so you may want to use kexec. Also ARMv6 does
not currently work with ARMv7 for VFP and TLS.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-04 13:19:16 -07:00
Tony Lindgren
7327d6374c omap2/3/4: Add new boards to omap3_defconfig
Enable 2430 omaps and the missing boards.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-04 13:19:16 -07:00
Dinh Nguyen
28a2afe0df mx5: Add USB to Freescale MX51 defconfig
Update mx51_defconfig to include USB EHCI by default.

This patch applies to 2.6.34-rc6.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-03 15:18:13 +02:00
Anton Vorontsov
478ea14466 ARM: cns3xxx: Add defconfig for CNS3420 validation board
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
2010-05-02 22:01:02 +04:00
Linus Torvalds
6bec11921a Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working.
  ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB
  ARM: 6030/1: KS8695: enable console
  ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT.
  ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs.
  ARM: 6023/1: update bcmring_defconfig to latest version and fix build error
  ARM: fix build error in arch/arm/kernel/process.c
2010-04-29 17:17:35 -07:00
Francisco Alecrim
57ed0e7b72 n8x0_defconfig: remove CONFIG_NILFS2_FS override
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to
symbol NILFS2_FS

Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23 15:37:24 -07:00
Jarkko Nikula
cc352a3432 omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and
it seems also that the Maemo release works without when testing with the
Maemo 2.6.28 kernel.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23 15:37:24 -07:00
Jarkko Nikula
c8fa4d2738 omap: rx51_defconfig: Remove duplicate phonet
Phonet is enabled by the commit bce54fed94
and this duplicate gives a warning when doing make rx51_defconfig.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23 15:35:11 -07:00
Leo Chen
313af42b5b ARM: 6023/1: update bcmring_defconfig to latest version and fix build error
update bcmring_defconfig to the latest kernel version, this will fix the
KAutobuild error.

Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22 12:30:12 +01:00
viresh kumar
b77932a4d2 ARM: 6019/1: ST SPEAr: Added default configuration files for SPEAr machines
Reviewed-by: Linus Walleij <linux.walleij@stericsson.com>

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:34:37 +01:00
Christian Glindkamp
67be0b8dba ARM: 6055/1: AT91: add defconfig for taskit PortuxG20 and Stamp9G20
Support for both boards can easily be built into one kernel image, so
there is no need to add one defconfig for each of them.

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:24:54 +01:00
Tony Lindgren
b3c7740a12 Merge branch 'omap-fixes-for-tony' of git://dev.omapzoom.org/pub/scm/saaguirre/linux-omap-camera into omap-fixes-for-linus 2010-03-22 14:06:38 -07:00
Linus Torvalds
9b59a0a4ee Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  ARM/OMAP: Remove the +x bit from a couple of source files
  omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values
  OMAP4: fix temporary hacks that break multi-omap PM
  OMAP2: cpu_is_omap2*: fix compile-time removal of unused code
  omap3: pandora: add missing i2c3 board_info
  omap: mach-omap2/io.c: fix function declarations
  omap: Fix gpio_resume_after_retention
  omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board
  omap: Checkpatch cleanup for blizzard.h
  omap: pass the reboot command to the boot loader
  omap2/3/4: mailbox: remove compiler warning
  OMAP2: serial.c: Fix number of uarts in early_init
  omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors
  omap2: Update n8x0 defconfig to test multi-omap and DMA api changes
  omap2: add USB initialization for tusb6010
  omap4: Fix build break by moving omap_smc1 into a separate .S
  omap2/3/4: ehci: avoid compiler error with touchbook
  omap3: Fix compile for Touch Book early_param
2010-03-18 16:59:30 -07:00
Sergio Aguirre
e6e8ea63f5 omap3: zoom2/3: Register only 1 8250 port
There's no more serial ports available, so, doesn't make sense
to create 4 device nodes.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:22 -05:00
Linus Torvalds
dca1d9f6d7 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...
2010-03-12 16:00:54 -08:00
Wang Qiang
8661970875 NUC900 LCD Controller Driver
An LCD controller driver for nuc900s.  The Linux LOGO is just fine and the
FB-Test application was ok, too.

Signed-off-by: Wang Qiang <rurality.linux@gmail.com>
Cc: Wang Zongshun <mcuos.com@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:34 -08:00
Tony Lindgren
9e542f37ce omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors
While waiting for the related USB patch, fix compile by enabling
it in the defconfigs. As discussed at:

http://thread.gmane.org/gmane.linux.usb.general/27432/focus=4460

Otherwise we'll get errors like:

drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in this function)
drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is reported only once
drivers/usb/core/hcd.c:1892: error: for each function it appears in.)

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11 12:35:07 -08:00
Tony Lindgren
79cf5bff25 omap2: Update n8x0 defconfig to test multi-omap and DMA api changes
Recent DMA API changes broke compile for tusb6010. While
testing the fixes for tusb6010, I had to update the n8x0
defconfig quite a bit. Might as well merge it while at it
to make it more usable as we're using this to test the
multi-omap booting between V6 and V7 ARMs.

Also, anybody using n8x0 with a current kernel will most
likely want to mount root on the MMC instead of the onenand
to keep the Maemo install intact.

Enable I2C, REGULATOR, MMC, MFD, PM, and USB. Also change the root
to /dev/mmcblk0p2 instead of the onenand.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11 10:22:39 -08:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Linus Torvalds
7f5b09c15a Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...
2010-03-03 08:48:58 -08:00
Russell King
882d01f96b Merge branch 'for-rmk/samsung5' of git://git.fluff.org/bjdooks/linux into devel-stable
Conflicts:
	arch/arm/Kconfig
	arch/arm/Makefile
2010-03-02 23:40:15 +00:00
Russell King
64ed28a87a Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into devel-stable
Conflicts:
	arch/arm/Kconfig
2010-03-02 23:31:07 +00:00
Russell King
b93a4afcff Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Conflicts:
	arch/arm/Makefile
2010-03-02 23:29:32 +00:00
Felipe Balbi
bce54fed94 arm: defconfig: rx51: enable phonet and g_nokia
trivial patch enabling g_nokia on rx51_defconfig.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:02 -08:00
Haojian Zhuang
ccffb1ad1f [ARM] mmp: add default configuration for MMP2
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:55 +08:00
Haojian Zhuang
e6dac5e1b6 [ARM] mmp: update pxa168_defconfig and include avengers lite support
Signed-off-by: Gavin Gu <gavin.gu@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:54 +08:00
Stefan Schmidt
d496936f95 [ARM] pxa/imote2: Add defconfig for the imote2 platform.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:53 +08:00
Tony Lindgren
d702d12167 Merge with mainline to remove plat-omap/Kconfig conflict
Conflicts:
	arch/arm/plat-omap/Kconfig
2010-03-01 14:19:05 -08:00
Sriram
6d20ca78b6 AM3517 EVM: Enable I2C support
There are multiple devices connected to I2C bus on AM3517EVM
(for instance audio codec, IO expander etc). Enable I2C support
in the default kernel configuration for AM3517 EVM.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25 14:45:09 -08:00
Ajay Kumar Gupta
13fc638289 AM35x: Enable OMAP_MUX in defconfig
Enabling OMAP_MUX in defconfig as it is required for EHCI to work.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25 14:45:09 -08:00
manjugk manjugk
93bfc85b23 Zoom3: Defconfig update
Some of the features are not enabled by default in zoom3 defconfig.

This patch enables:
 - MMC Resume
 - TWL4030 RTC driver
 - Debug File system

Build and boot tested on Zoom3 board.

Signed-off-by: Manjunatha GK <manjugk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25 14:45:08 -08:00
Russell King
2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Russell King
3560adf620 Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', 'pending-dma-streaming', 'u300' and 'umc' into devel 2010-02-25 22:06:43 +00:00
Russell King
2a2d10f386 Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable 2010-02-25 20:41:34 +00:00
Tony Lindgren
b610ec5023 Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
Santosh Shilimkar
ad001f145d OMAP4: clock: Remove clock hacks from timer-gp.c
Now the omap4 clock framework is in mainline and clk_get_rate()
is functional. Hence reomve the hardcoded clock hacks.

This patch also fixes
Division by zero in kernel.
Backtrace:
[<c0025fb8>] (dump_backtrace+0x0/0x110) from [<c017febc>] (dump_stack+0x18/0x1c)
 r7:60000093 r6:c0641050 r5:c0223e78 r4:c02126b4
[<c017fea4>] (dump_stack+0x0/0x1c) from [<c00260fc>] (__div0+0x18/0x20)
[<c00260e4>] (__div0+0x0/0x20) from [<c01431fc>] (Ldiv0+0x8/0x10)
[<c00318d4>] (omap_dm_timer_stop+0x0/0xb0) from [<c002c148>] (omap2_gp_timer_set_mode+0x1c/0x68)
 r5:c0223e78 r4:00000000
[<c002c12c>] (omap2_gp_timer_set_mode+0x0/0x68) from [<c0063270>] (clockevents_set_mode+0x30/0x64)
 r5:c020cae0 r4:00000000
[<c0063240>] (clockevents_set_mode+0x0/0x64) from [<c00632fc>] (clockevents_exchange_device+0x30/0x9c)
 r5:c020cae0 r4:c02146e0
[<c00632cc>] (clockevents_exchange_device+0x0/0x9c) from [<c00636e0>] (tick_notify+0x17c/0x404)
 r7:00000000 r6:c0641050 r5:00000000 r4:c020cae0
[<c0063564>] (tick_notify+0x0/0x404) from [<c005d5fc>] (notifier_call_chain+0x34/0x78)
[<c005d5c8>] (notifier_call_chain+0x0/0x78) from [<c005d684>] (__raw_notifier_call_chain+0x1c/0x24)
[<c005d668>] (__raw_notifier_call_chain+0x0/0x24) from [<c005d6ac>] (raw_notifier_call_chain+0x20/0x28)
[<c005d68c>] (raw_notifier_call_chain+0x0/0x28) from [<c0062e78>] (clockevents_do_notify+0x1c/0x24)
[<c0062e5c>] (clockevents_do_notify+0x0/0x24) from [<c0062f18>] (clockevents_register_device+0x98/0xd0)
[<c0062e80>] (clockevents_register_device+0x0/0xd0) from [<c001a194>] (percpu_timer_setup+0x80/0x9c)
 r7:00000000 r6:00000002 r5:00000002 r4:00000003
[<c001a114>] (percpu_timer_setup+0x0/0x9c) from [<c000e9f0>] (smp_prepare_cpus+0xb0/0xe8)
[<c000e940>] (smp_prepare_cpus+0x0/0xe8) from [<c00084e8>] (kernel_init+0x5c/0x1fc)
 r7:00000000 r6:00000000 r5:00000000 r4:c001b8a4
[<c000848c>] (kernel_init+0x0/0x1fc) from [<c0046c50>] (do_exit+0x0/0x604)
 r7:00000000 r6:00000000 r5:00000000 r4:00000000

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 17:45:17 -07:00
Kukjin Kim
e6502522c2 ARM: S5PV210: Add S5PC110 configuration file
This patch adds S5PC110 default configuration file.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 22:47:24 +00:00
Kukjin Kim
af60ca4f29 ARM: S5PV210: Add S5PV210 configuration file
This patch adds S5PV210 default configuration file.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 22:47:23 +00:00
Kukjin Kim
7f7035f21c ARM: S5P6442: Add S5P6442 configuration file
This patch adds S5P6442 default configuration file.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 01:52:18 +00:00
Sebastien Requiem
c499546f43 [ARM] MV78xx0: Support for Buffalo WXL (Terastation Duo)
* Modification of Kconfig to add the Option
* 1 new file : buffalo-wxl-setup.c
This file is inspired from the db-78xx0-setup.c already present.
The following is done:
  - Configure MPP Lines for the plateform (see my patch for MPP)
This is taken from the stock kernel provided by buffalotech (the vendor)
  - GigaBit Ethernet
  - Sata
  - Uart are initiallized in a different way than on the dev board as we
have one core only.
  - USB

The kernel has been running for some days now on my plateform.

Signed-off-by: Sebastien Requiem <sebastien@kolios.dk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-23 17:10:08 -05:00
Sanjeev Premi
5ebc86eda7 OMAP3EVM: PM: Update defconfig
This patch updates the omap3_evm_defconfig to
select these options:
  * CONFIG_PM_DEBUG
  * CONFIG_DEBUG_FS
  * CONFIG_OMAP_SMARTREFLEX

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19 15:22:17 -08:00
Thomas Weber
8a88b61b70 Add devkit8000_defconfig
This patch adds a default config for the Timll Devkit8000.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19 15:22:17 -08:00
Enric Balletbo i Serra
cd2b90d9f7 omap3: Update defconfig for IGEP v2 to allow new drivers andfeatures
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19 15:22:17 -08:00
Grazvydas Ignotas
3cca088d07 omap3: pandora: update defconfig
Enable DSS2 and update defconfig for current kernel.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17 17:23:20 -08:00
Santosh Shilimkar
22192b37bb ARM: 5920/1: OMAP4: Enable L2 Cache
This patch enables L2 cache and associated Errata on the
OMAP4430 SDP.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:39:55 +00:00
Russell King
56012808f4 Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable
Conflicts:
	arch/arm/Makefile
2010-02-15 21:20:18 +00:00
Adrian Hunter
db0fefc511 omap_hsmmc: Move gpio and regulator control from board file
This patch moves the setup code for GPIO's and Voltage
Regulators from the board file mmc-twl4030.c to the
driver omap_hsmmc.c.  PBIAS and other system control
configuration remains in the board file.

Moving GPIO code to the driver makes the board initialisation
code independent of when GPIO's are defined.  That makes the
board initialisation now entirely independent of its original
twl4030 roots.

Moving Voltage Regulator code to the driver allows for further
development of regulator support in the core MMC code.  It also
permits the MMC core to be compiled as a module, because the
board code no longer calls MMC core functions.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 10:03:34 -08:00
Tony Lindgren
fd17a25fe9 omap2/3/4: Add omap4 into omap3_defconfig
Add omap4 into omap3_defconfig. Note that this does not
yet boot on omap4, but boots on omap2 and omap3.

Also note that CONFIG_SMP does not currently work on
uniprocessor ARMs.

Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 09:27:25 -08:00
Tony Lindgren
78aee23f32 omap2/3: Update omap3_defconfig to build in all the 2420 based boards
Note that booting 2420 depends on another patch posted earlier to not
select CONFIG_CPU_32v6K if CONFIG_ARCH_OMAP2 is selected.

Also note that we cannot add omap2430 in yet because of the different
clock addresses compared to 2420. Also note that we cannot have
CONFIG_CPU_32v6K=y in order to boot on 24xx.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 09:27:07 -08:00
Amit Kucheria
51c23a04c3 mxc: Add mx51_defconfig
This config is used to test the base support for i.MX51 processors on the
Babbage board

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 18:32:18 +02:00
Magnus Damm
4ae04acb81 ARM: mach-shmobile: early console support using earlyprintk
Add support for early console to the SH-Mobile boards.

Simply perform an early platform probe for "earlyprintk"
to trigger the early serial console code in sh-sci.c.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09 10:34:12 +09:00
Magnus Damm
34bf0fc54a ARM: mach-shmobile: G3EVM, G4EVM and AP4EVB defconfigs
Add defconfigs for G3EVM, G4EVM and AP4EVB.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08 12:54:19 +09:00
Nicolas Pitre
e233230f9c [ARM] orion5x: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-05 00:28:36 -05:00
Nicolas Pitre
f123560a07 [ARM] Kirkwood: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-05 00:27:08 -05:00
Zhu Qingsen
2d18638ec0 [ARM] Orion: Add Buffalo Linkstation LS-HGL support
Signed-off-by: Zhu Qingsen <zhuqs@cn.fujitsu.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-05 00:27:06 -05:00
Russell King
a814290e17 Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into devel-stable 2010-01-27 22:11:32 +00:00
Ben Dooks
1725c679a0 ARM: S3C64XX: Update s3c6400_defconfig for current kernel
Update the s3c6400_defconfig with one from the current kernel which has been
build and run tested on an SMDK6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21 15:37:15 +09:00
Ben Dooks
3a3b585aa4 ARM: S3C6400: Update s3c6400_defconfig for bigger initrds for SMDK6410
The Samsung initrd for SMDK6410 is now bigger than the original initrds
that where used. Increase the command-line size and the size of the ramdisk
that it is unpacked into.

Also change the default init to /linuxrc to avoid problems with the current
SMDK ramdisk image failing to run /bin/bash.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21 15:36:40 +09:00
Ben Dooks
8005745d6e ARM: SAMSUNG: Move pm-check.c to plat-samsung
Move the pm-check.c file to plat-samsung for all Samsung SoC users, and
update Kconfig names to make them SAMSUNG_ instead of S3C2410_

Sed expresions used to make the change:

    s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g
    s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21 13:45:58 +09:00
Andrew Victor
c9a8fdd8b3 ARM: 5851/1: [AT91] AT572D940HF-EK board support
Add support for the Atmel AT572D940HF-EK board (development board for
the AT572D940HF processor).

Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-20 12:36:27 +00:00
Maurus Cuelenaere
3929e1e76d ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsung
Move S3C24XX ADC driver to plat-samsung

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18 09:30:49 +09:00
Kukjin Kim
62a6156e88 ARM: S5P6440: Add configuration file
This patch adds Samsung's S5P6440 default configuration file.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 19:16:43 +09:00
Russell King
e55d1936f2 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2010-01-10 17:34:09 +00:00
Linus Walleij
406eb02029 ARM: 5867/1: Update U300 defconfig
This updates the U300 defconfig to include the DMA driver merged
in 2.6.33-rc1 and adds a codepage that's needed to mount VFAT MMC
cards as default. The rest is new config options.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-08 16:14:28 +00:00
Uwe Kleine-König
d13ab097ae imx: remove mx1ads defconfig
For some time now the defconfig for mx1ads produces a kernel for
a versatile board.  As CONFIG_ARCH_MX1ADS is included in the mx1
defconfig just get rid of mx1ads_defconfig.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
2010-01-08 16:45:21 +01:00
Uwe Kleine-König
f747f93543 imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform"
Not using MACH_IMX27LITE makes machine_is_imx27lite always return 0
independent of building support for this machine.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
2010-01-05 10:10:08 +01:00
Russell King
4da8b8208e ARM: Kill CONFIG_CPU_32
26-bit ARM support was removed a long time ago, and this symbol has
been defined to be 'y' ever since.  As it's never disabled anymore,
we can kill it without any side effects.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18 16:07:53 +00:00
Daniel Mack
e863c884cd [ARM] pxa/raumfeld: add defconfig
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-18 15:34:58 +08:00
Marc Zyngier
285eae0a4b [ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13 21:42:58 +08:00
manjugk manjugk
5bcf5a106f omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
The TWL4030 keypad driver is not enabled by default for zoom2 and zoom3
boards.

This patch will enable the same for both zoom2 and zoom3 boards.

Tested on zoom2(3430) and zoom3(3630) boards.

Signed-off-by: Manjunatha GK <manjugk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:37 -08:00
Cory Maccarrone
87cbb94b83 omap1: htcherald: Update defconfig to include mux support
The existing htcherald_defconfig did not include mux support, which
prevented USB and other functionality from working out of the box.
This change updates the defconfig to add it in.  It also aligns the
defconfig to the -rc8 kernel config.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:36 -08:00
Santosh Shilimkar
dca0d91769 OMAP4: Sync up omap4430 defconfig
Enable minimum features to boot omap4430 on es1.0 samples. v2 versions
removes the "CONFIG_SYSFS_DEPRECATED_V2" since it's deprecated. Without
this older file system doesn't boot. One need to upgrade the filesystem
if getting stuck in first init function.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:35 -08:00
Gregoire Gentil
249b17f23a omap3: Defconfig file of Always Innovating OMAP3-based Touch Book
Defconfig file of Always Innovating OMAP3-based Touch Book

Signed-off-by: Gregoire Gentil <gregoire@gentil.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Linus Torvalds
aa2cf42059 Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer
  OMAP: SDP: Enable DSS2 for OMAP3 SDP board
  OMAP: DSS2: Taal DSI command mode panel driver
  OMAP: DSS2: Add generic and Sharp panel drivers
  OMAP: DSS2: omapfb driver
  OMAP: DSS2: DSI driver
  OMAP: DSS2: SDI driver
  OMAP: DSS2: RFBI driver
  OMAP: DSS2: Video encoder driver
  OMAP: DSS2: DPI driver
  OMAP: DSS2: DISPC
  OMAP: DSS2: Add more core files
  OMAP: DSS2: Display Subsystem Driver core
  OMAP: DSS2: Documentation for DSS2
  OMAP: Add support for VRFB rotation engine
  OMAP: Add VRAM manager
  OMAP: OMAPFB: add omapdss device
  OMAP: OMAPFB: split omapfb.h
  OMAP2: Add funcs for writing SMS_ROT_* registers
2009-12-10 21:55:17 -08:00
Linus Torvalds
aed886ce77 Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (69 commits)
  davinci: Initial support for Neuros OSD2 platform.
  davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c
  davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c
  DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM
  DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilities
  davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig
  davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator
  davinci: DA850/OMAP-L138 EVM: register for cpuidle support
  davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register
  davinci: add CPU idle driver
  davinci: DA8XX/OMAP-L1XX: fix compiler warning
  davinci: DA850/OMAP-L138: eliminate static function declaration
  davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII mode
  davinci: DA850/OMAP-L138 EVM: get rid of DA850_UI_EXP config option
  davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY
  davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD is selected
  davinci: DA830/OMAP-L137 EVM: use runtime detection for UI card
  davinci: DA830/OMAP-L137 EVM: remove ifdefs inside da830_evm_init()
  davinci: DA830/OMAP-L137 EVM: fix warning with default config
  davinci: Add NAND support for DA830/OMAP-L137 EVM platform
  ...
2009-12-09 19:02:46 -08:00
Tomi Valkeinen
d9056ce2af OMAP: SDP: Enable DSS2 for OMAP3 SDP board
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2009-12-09 18:29:38 +02:00
Linus Torvalds
1c496784a0 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits)
  arm: omap: Add omap3_defconfig
  AM35xx: Defconfig for AM3517 EVM board
  AM35xx: Add support for AM3517 EVM board
  omap: 3630sdp: defconfig creation
  omap: 3630sdp: introduce 3630 sdp board support
  omap3: Add defconfig for IGEP v2 board
  omap3: Add minimal IGEP v2 support
  omap3: Add CompuLab CM-T35 defconfig
  omap3: Add CompuLab CM-T35 board support
  omap3: rx51: Add wl1251 wlan driver support
  omap3: rx51: Add SDRAM init
  omap1: Add default kernel configuration for Herald
  omap1: Add board support and LCD for HTC Herald
  omap: zoom2: update defconfig for LL_DEBUG_NONE
  omap: zoom3: defconfig creation
  omap3: zoom: Introduce zoom3 board support
  omap3: zoom: Drop i2c-1 speed to 2400
  omap3: zoom: rename zoom2 name to generic zoom
  omap3: zoom: split board file for software reuse
  omap3evm: MIgrate to smsc911x ethernet driver
  ...

Fix trivial conflict (two unrelated config options added next to each
other) in arch/arm/mach-omap2/Makefile
2009-12-08 08:15:29 -08:00
Russell King
3d14b5beba Merge branch 'sa1100' into devel 2009-12-06 17:00:33 +00:00
Dmitry Artamonow
ebdb56409d ARM: 5825/1: SA1100: h3600: update defconfig
Update defconfig to current kernel, enable support for iPAQ H3100
and following drivers: gpio-keys, htc-egpio, ide_cs.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06 16:52:57 +00:00
Russell King
0719dc3413 Merge branch 'devel-stable' into devel 2009-12-05 10:35:33 +00:00
Russell King
e28edb723e Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' into devel 2009-12-05 10:35:18 +00:00
Russell King
677f4f64e4 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2009-12-04 17:34:50 +00:00
Russell King
4567c4a896 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2009-12-04 17:34:16 +00:00
Olof Johansson
9a01609e18 arm: omap: Add omap3_defconfig
Having one combined defconfig that is the superset of the individual
defconfigs for OMAP3 platforms is useful for easily finding build
errors. Not to mention convenient as a base if you want to boot several
platforms with a single kernel image.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 16:52:21 -08:00
wanzongshun
045868df2c ARM: 5844/1: rename w90p910_defconfig to n uc910_defconfig
rename w90p910_defconfig

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 23:08:31 +00:00
wanzongshun
6aeb4e4a9d ARM: 5839/1: add nuc960_defconfig
add nuc960_defconfig

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 23:08:30 +00:00
wanzongshun
9b5b495281 ARM: 5838/1: add nuc950_defconfig
add nuc950_defconfig

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 23:08:30 +00:00
Srinidhi Kasagar
71abe6f5ce ARM: 5835/1: ARM U8500: add defconfig
Add defconfig file for mop500 board

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 12:43:52 +00:00
Igor Grinberg
5fa46fca1c [ARM] pxa/cm-x300: update defconfig
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:12 +08:00
Antonio Ospite
2fd8e55e13 [ARM] pxa/ezx: update ezx_defconfig now that ezx-pcap is in
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:03 +08:00
Saeed Bishara
da43243e76 RTC: let Dove soc select the rtc-mv driver.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27 15:43:21 -05:00
Lennert Buytenhek
573a652fb0 ARM: Add Tauros2 L2 cache controller support
Support for the Tauros2 L2 cache controller as used with the PJ1
and PJ4 CPUs.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27 15:43:21 -05:00
Saeed Bishara
edabd38e1a ARM: add base support for Marvell Dove SoC
The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27 15:43:06 -05:00
Yoichi Yuasa
415c7d26d2 Add KZM-ARM11-01 support
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-27 09:17:00 +01:00
Ranjith Lohithakshan
4421752e33 AM35xx: Defconfig for AM3517 EVM board
This patch adds a minimal defconfig for AM3517 EVM board.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-25 14:21:01 -08:00
vikram pandita
62002e8f82 omap: 3630sdp: defconfig creation
Create 3630sdp defconfig file

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-25 14:21:01 -08:00
Enric Balletbo i Serra
9d9e502725 omap3: Add defconfig for IGEP v2 board
Add defconfig for IGEP v2 board

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-25 14:21:00 -08:00
Mike Rapoport
35ca0d1e42 omap3: Add CompuLab CM-T35 defconfig
Add CompuLab CM-T35 defconfig

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-25 14:21:00 -08:00
Andrey Porodko
c16fe26701 davinci: Initial support for Neuros OSD2 platform.
The Neuros OSD 2.0 is the hardware component of the Neuros Open
Internet Television Platform. Hardware is very close to Ti DM644X-EVM board.
It has: DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
Additionaly realtime clock, IR remote control receiver,
IR Blaster based on MSP430 (firmware although is different
from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
with PATA interface, two muxed red-green leds.

For more information please refer to
	http://wiki.neurostechnology.com/index.php/OSD_2.0_HD

Signed-off-by: Andrey Porodko <panda@chelcom.ru>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:39 -08:00
Sekhar Nori
afc3ea1cea davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:37 -08:00
Kevin Hilman
1ce52121c4 davinci: DMx and da8xx defconfig updates
DMx:
- enable MMC and dm365evm_keys
- Enable DM355 and DM365 input drivers as modules.

da8xx
- combine da830 and da850 into common defconfig
- drop SYSFS_DEPRECATED flag
- auto-select D$ writethrough for da830
- enable CPUfreq and FB

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:32 -08:00
Cory Maccarrone
58c54e156c omap1: Add default kernel configuration for Herald
This adds a new defconfig for the HTC Herald series of devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
vikram pandita
1ced4532c0 omap: zoom2: update defconfig for LL_DEBUG_NONE
Update DEBUG_LL for zoom2 board as CONFIG_OMAP_LL_DEBUG_NONE

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
vikram pandita
d516aad1c3 omap: zoom3: defconfig creation
Create zoom3 defconfig file

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
Sriram
562138a448 omap3evm: MIgrate to smsc911x ethernet driver
Migrate to smsc911x ethernet driver instead of smc911x driver.
The smsc911x ethernet driver supports NAPI and performs better
under heavy traffic. With the smc911x driver we were witnessing
very high iowait time for high IO load over NFS.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
Ajay Kumar Gupta
e8e51d2920 omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E)
Added runtime programming for the differences in EHCI interface between
OMAP3EVM revisions (Rev >= E) and (Rev < E).

Changes:
	- EHCI PHY reset GPIO pin is 21 on Rev >= E while Rev < E
	  uses GPIO pin 135.
	- Rev >= E uses EHCI Vbus enable GPIO22 line.
	- Rev >= E uses GPIO61 to select EHCI port either on main board or
	  on Mistral Daughter Card (MDC). OMAP3EVM Rev < E doesn't have
	  EHCI port on main board.
	- Currently GPIO61 it programmed to enable EHCI port on main
	  board only.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2009-11-22 10:24:33 -08:00
Anand Gadiyar
50a1f7bfea omap3: Update 3430SDP defconfig
The mainline merge of the 3430SDP support (commit 6fdc29e2)
seems to have messed up the 3430 defconfig completely.

Update the defconfig using a known good version
(SDP defconfig from v2.6.26-omap2 and current beagle defconfig)
as reference.

The image size is now 1.9 MB down from 2.4 MB earlier, and
the number of modules is 8, down from 203. Build time also
scales proportionally.

Other support (OneNAND, etc) can be enabled as needed.

Note that this patch intentionally does not update CONFIG_FB
related options to avoid merge conflicts with the pending
omap_dss2 patches.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
vikram pandita
6502401d81 omap3: defconfigs: remove SYSFS_DEPRECATED flag
Remove the SYSFS_DEPRECATED flag from OMAP3 board defconfigs
This is a deprecated feature no longer needed.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:33 -08:00
Sriram
839c978794 omap3: evm: make HSMMC driver built-in
For ease of use it is preferrable to build in HSMMC driver
rather than build it as kernel module. This patches updates
default configuration for omap3evm to reflect this change.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
Jani Nikula
f014ee320e ARM OMAP3: RX-51 board - add initialization of gpio keys
Initialize some of the RX-51 input GPIO lines as gpio keys. Enable gpio
keys as a module in rx51_defconfig.

Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-22 10:09:35 -08:00
Linus Torvalds
031fc8f313 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap3: Decrease cpufreq transition latency
  omap3: update Pandora defconfig
  omap3: 3430sdp: Enable Linux Regulator framework
  omap3: beagle: Fix USB host port power control
  omap3: pandora: Fix keypad keymap
  omap1: Amstrad Delta defconfig fixes
  omap: Fix omapfb/lcdc on OMAP1510 broken when PM set
  omap: Use resource_size
  omap: Fix race condition in omap dma driver
2009-11-12 14:57:15 -08:00
Grazvydas Ignotas
1ea6e6652a omap3: update Pandora defconfig
This patch updates defconfig to enable options needed to properly
boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs,
TWL4030 GPIO and sound drivers.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Sergio Aguirre
b30dcf5f37 omap3: 3430sdp: Enable Linux Regulator framework
Some drivers have dependencies on this, and therefore should be
enabled.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Janusz Krzysztofik
0194324455 omap1: Amstrad Delta defconfig fixes
The patch provides the following fixes:

- keep kernel small enough to boot with standard tools,
- ensure compatibility with both new and legacy distros,
- turn on support for recently added or fixed hardware features.

Created and tested against linux-2.6.32-rc5.

Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:08 -08:00
Uwe Kleine-König
01c62c9b32 ARM: 5782/1: at91: support for eco920
CONFIG_MACH_ECO920 is enabled in at91rm9200dk_defconfig.  The name is
wrong, but this is better than adding another defconfig or don't get
compile coverage at all.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-10 23:46:35 +00:00
Nicolas Pitre
3293576c6b [ARM] orion5x: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-07 20:59:20 -05:00
Nicolas Pitre
ffbfe093b6 [ARM] Kirkwood: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-07 20:36:02 -05:00
Linus Torvalds
0b3dc0e9c8 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: Fix UART4 platform data on omap4
  omap4: Allow omap_serial_early_init() for OMAP4430 board
  omap3: PM: enable UART3 module wakeups
  omap2: Fix console serial port number for n8x0
  omap2: Fix detection of n8x0
  omap1: Fix DSP public peripherals support for ams-delta
  omap1: Fix redundant UARTs pin muxing that can break other hardware support
  omap: iommu: fix wrong condition check for SUPERSECTION
  omap: SDMA: Fix omap_stop_dma() API for channel linking
  omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-29 08:16:42 -07:00
Tony Lindgren
60dbd8c95f omap2: Fix console serial port number for n8x0
With the recent changes omap serial ports match the physical
numbering like they should. Fix the kernel CMDLINE accordingly
so console works.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22 15:41:16 -07:00
Linus Walleij
faff8032ec ARM: 5765/1: Updated U300 defconfig
This updates the U300 to use all the drivers merged in during the
2.6.32 merge window.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21 13:08:42 +01:00
Sanjeev Premi
dc6e56b199 omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
The symbol CONFIG_ISP1301_OMAP was defined twice in the
defconfig. This was causing the warning:
arch/arm/configs/omap3_beagle_defconfig:972:warning:
 override: reassigning to symbol ISP1301_OMAP

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14 09:56:33 -07:00
Russell King
534d0c92cf Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop
Conflicts:
	MAINTAINERS
2009-10-02 22:31:04 +01:00
Jaswinder Singh Rajput
d5fc79cca2 ARM: Remove unused CONFIG SA1100_H3XXX
Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Dmitry Artamonow <mad_soft@inbox.ru>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28 18:06:20 +01:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Linus Torvalds
a7c367b95a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...
2009-09-23 10:07:49 -07:00
Imre Deak
c8f1c1b9e1 N770: enable LCD MIPI-DCS in Kconfig
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Stanley.Miao
8fea8844a7 omapfb: add support for the ZOOM MDK LCD
Add glue to control the OMAP_LDP LCD as a frame buffer device using the
existing dispc.c driver under omapfb.

Patch updated for mainline kernel.  Note that the drivers/video/omap
should be updated to pass omap_lcd_config in platform_data.  The patch
should also be updated to compile if twl4030 is not selected, and
eventually to use the regulator framework.

Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Koen Kooi
27969ccc28 omapfb: add support for the OMAP3 Beagle DVI output
The default resolution is 1024x768@24bit

This version addresses the comments from Felipe Balbi adn Arun Edarath

Fixed-by: Felipe Contreras <felipe.contreras@gmail.com>
Fixed-by: Steve Sakoman <steve@sakoman.com>
Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Koen Kooi <koen@openembedded.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Kevin Hilman
fb49b78452 omapfb: add support for the 3430SDP LCD
The 3430SDP uses the same panel as the 2430SDP.  The main difference are
in the GPIO lines used for panel enable and backlight, and the VAUX
register/commands sent to the TWL4030 power subsystem.

Also, some misc. whitespace cleanups.

Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@mvsita.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Russell King
28f9f19db9 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-09-21 16:02:30 +01:00
Alessandro Rubini
63234717d1 mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-20 05:59:42 -07:00
Linus Torvalds
6f128fa344 Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits)
  DaVinci: DM646x - platform changes for vpif capture and display drivers
  davinci: DM355 - platform changes for vpfe capture
  davinci: DM644x platform changes for vpfe capture
  davinci: audio: move tlv320aic33 i2c setup into board files
  DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs
  DaVinci: DM365: Adding entries for DM365 IRQ's
  DaVinci: DM355: Adding PINMUX entries for DM355 Display
  davinci: Handle pinmux conflict between mmc/sd and nor flash
  davinci: Add NOR flash support for da850/omap-l138
  davinci: Add NAND flash support for DA850/OMAP-L138
  davinci: Add MMC/SD support for da850/omap-l138
  davinci: Add platform support for da850/omap-l138 GLCD
  davinci: Macro to convert GPIO signal to GPIO pin number
  davinci: Audio support for DA850/OMAP-L138 EVM
  davinci: Audio support for DA830 EVM
  davinci: Correct the number of GPIO pins for da850/omap-l138
  davinci: Configure MDIO pins for EMAC
  DaVinci: DM365: Add Support for new Revision of silicon
  DaVinci: DM365: Fix Compilation issue due to PINMUX entry
  DaVinci: EDMA: Updating default queue handling
  ...
2009-09-18 09:20:37 -07:00
Linus Torvalds
73c583e4e2 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...
2009-09-18 09:19:26 -07:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Russell King
7010381449 Merge branch 'nomadik' into devel-stable 2009-09-12 11:50:52 +01:00
Matej Kenda
23440f85ff [ARM] pxa: add defconfig for IskraTel XCEP board
Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:39 +08:00
Haojian Zhuang
36714c935a [ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig
Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig.
Since they're similar platform and servicing for same SoC family.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:28 +08:00
Kristoffer Ericson
56ddf7e6d4 ARM: 5689/1: Update default config of HP Jornada 700-series machines
This patch updates the default config for HP Jornada 700-series handhelds.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-06 20:54:41 +01:00
Paul Walmsley
36d568ec05 OMAP3: update OMAP3 Beagle defconfig
Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support.
Beagle can again use MMC rootfs after this patch.  Tested on BeagleBoard
rev C2.

Patch updated to enable PM and OTG options as suggested by
Eric Witcher <ewitcher@mindspring.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:17 -07:00
Vikram Pandita
1eab46a2ea OMAP3: Zoom2: Update board defconfig
Update defconfig for Zoom2 to include
TWL4030 core
TWL4030 drivers (bci, gpio, keypad, usb, mmc)

Also sync the defconfig after issuing a menuconfig

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:14 -07:00
Timo Kokkonen
ac2a048c3c OMAP3: rx51_defconfig: add twl4030 to rx51 default configuration
twl4030 watchdog will be compiled as a module by default.

Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:10 -07:00
Sergio Aguirre
8870d946e1 OMAP3: 3430SDP: Fix defconfig
This patch makes the SDP boot again with the defconfig.

Changes done:

 - Removes other selected boards.
 - Sets the Low Level debug output for UART1.
 - Disables some paripherals from other boards.

Tested on a SDP3430-VE5.1.0 (OMAP3430 ES3.1)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:09 -07:00
Kalle Valo
af933f4729 OMAP2: n8x0: add n8x0_defconfig
Add defconfig file for OMAP2 N800 and N810 devices.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 10:53:38 -07:00
Kevin Hilman
889c1e0dab davinci: Kconfig: add dm646x ASoC support 2009-08-26 11:55:48 +03:00
Kevin Hilman
10a1af384e davinci: Kconfig: update default defconfig
Updated default defconfig after da850 merge and 2.6.31-rc3 update.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:46 +03:00
Sudhakar Rajashekhara
0fbc559215 davinci: Add support for DA850/OMAP-L138 EVM board
Add support for the DA850/OMAP-L138 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) card which contains
various devices. This UI card can be connected to the base
board. Support for all the devices on the UI card and ones on
the EVM will be added in subsequent patches.

The EVM schematics are not available publicly yet; but should
be available soon.

A new defconfig for this board has been added mainly because
the DA830/OMAP-L137 defconfig forces writethrough cache mode
which is not required on DA850/OMAP-L138.

This patch has been boot tested on DA850/OMAP-L138 EVM
using ramdisk as filesystem.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:45 +03:00
Kevin Hilman
88659988d5 davinci: Kconfig: update default config for 2.6.31-rc
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:57:00 +03:00
Mark A. Greer
8593790d60 davinci: da8xx: Add support for DA830/OMAP-L137 EVM board
Add support for the DA830/OMAP-L137 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) and Audio cards
that can be connected which contain various devices.
Support for those devices and ones on the EVM will be
added in subsequent patches.

Additional generalizations for future SoCs in da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:59 +03:00
Sandeep Paulraj
a46e9e403c davinci: Adding DM365 entries to Makefile/Kconfig/defconfig
This patch does the following
1) Adds entries to davinci_all_defconfig for DM365
2) Adds entries to the Makefile for DM365
3) Adds entries for DM365 in the Kconfig

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:58 +03:00
John Holland
c55bf102b6 [ARM] Kirkwood: enable eSATA on QNAP TS-219P
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:56:00 -04:00
Dan Williams
9e2a7e6f5f iop33x: update defconfig (default atu to on)
By default the iop3xx configurations are set to boot the platforms over
an nfs root configuration.  Since commit c34002c1 "iop: unconditionally
initialize the ATU on platforms known to be 'hosts'" this configuration
also requires iop3xx_init_atu=y to be specified on the kernel command
line.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-18 13:47:30 -07:00
Byungho Min
e119766f4e ARM: S5PC100: Board and configuration file
SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-16 23:40:39 +01:00
Leo Chen
7f33527f54 ARM: 5670/1: bcmring: add default configuration for bcmring arch
add default configuration for bcmring arch

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 16:01:51 +01:00
Russell King
7063c88c72 Merge branch 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-08-10 14:23:29 +01:00
Roger Quadros
4177662ec9 OMAP3: RX51: Updated rx51_defconfig
Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots.

Note that the regulator code should be moved from mmc-twl4030.c
to omap_hsmmc.c so it can be a module.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-10 14:49:52 +03:00
Gupta, Ajay Kumar
e8e2ff462d USB: musb: fix the nop registration for OMAP3EVM
OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.

Cleanups being done:
	- Remove unwanted code in usb-musb.c file
	- Register NOP in OMAP3EVM board file using
	  usb_nop_xceiv_register().
	- Select NOP_USB_XCEIV for OMAP3EVM boards.
	- Don't enable TWL4030_USB in omap3_evm_defconfig

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 16:05:13 -07:00
Eric Bénard
10233a9398 ARM: 5630/1: Add support for Eukrea's CPUAT91
CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash,
up to 128MB SDRAM and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <ebenard@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 17:48:41 +01:00
Eric Bénard
41a353d126 ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20
CPU9260 and CPU9G20 share the same PCB populated with either
Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash,
up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 17:48:40 +01:00
Sascha Hauer
42469ff014 mx3 defconfig update
- enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards
- enable MXC nand driver
- enable UBI support
- disable cs89x0 support which broke all boards which do not have this chip

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28 14:24:28 +02:00
Sascha Hauer
8666f8deec mx27 defconfig update
- enable MX27_3DS and MX27LITE Board
- enable MXC nand driver
- enable UBI support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28 14:22:42 +02:00
Linus Walleij
d740d347f8 [ARM] 5608/1: Updated U300 defconfig
Removed the LBD support that isn't of any use right now at least,
then remove remnants of the TCM config flags that somehow crept
in by mistake (not yet merged patch for 2.6.32) and then the usual
defconfig noise from updated menus.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17 13:38:56 +01:00
Matthias Kaehlcke
66d9e2102a [ARM] 5576/1: Update kb9202_defconfig
The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the
configuration in order to produce a bootable image.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:23:05 +01:00
Alessandro Rubini
c2b455474e [ARM] 5588/1: nomadik: add defconfig for nhk8815
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:20:48 +01:00
Linus Walleij
9be4b17c4c [ARM] 5579/1: Updated U300 defconfig
This defconfig update selects all the new U300 drivers merged for
2.6.31-rc1 in the merge window and add defaults for the new
config options. It compiles and boots nicely from initramfs on
the U300.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 17:24:39 +01:00
Ben Dooks
622a8f5f7b [ARM] s3c2410_defconfig: add MINI2440 machine to build
Add the MINI2440 to the list of machines built by the
central defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 18:20:10 +01:00
Ben Dooks
a18327f35a [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT
Remove the unused CONFIG_DEBUG_S3C_PORT as we currently only have
support for using the S3C UARTs via the low-level debug code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 12:24:07 +01:00
Michel Pollet
bf4a59f152 [ARM] MINI2440: Create a mini2440_defconfig file
Just a working, starting point config file for the board.

Signed-off-by: Michel Pollet <buserror@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-15 22:10:24 +01:00
Russell King
b7c11ec9f1 Merge branch 'u300' into devel
Conflicts:
	arch/arm/Makefile
Updates:
	arch/arm/mach-u300/core.c
	arch/arm/mach-u300/timer.c
2009-06-14 11:01:44 +01:00
Russell King
0609996100 Merge branch 'stmp' into devel 2009-06-14 11:01:05 +01:00
Russell King
4c31791c3d Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-06-14 11:00:16 +01:00
Russell King
2631182bf9 Merge branch 'w90x900' into devel 2009-06-11 15:23:26 +01:00
wanzongshun
cc63262f27 [ARM] 5550/1: Add default configure file for w90p910 platform
Add default configure file for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 14:45:19 +01:00
Russell King
b0efb42478 Merge branch 'ep93xx' into devel 2009-06-10 22:40:04 +01:00
Russell King
1ee73784b6 Merge branch 'for_rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel 2009-06-10 22:38:27 +01:00