The comment was right originally but the _pad array size was wrong. It
was fixed in the meantime but the comment not updated.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 523d6e9fae (arm64:mm: free the useless initial page table)
introduced a BUG_ON checking for the allocation type but it was
referring the early_alloc() function in the __init section. This patch
changes the check to slab_is_available() and also relaxes the BUG to a
WARN_ON_ONCE.
Reported-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Alternate macro mode is not a property of a macro definition, but a
gas runtime state that alters the way macros are expanded for ever
after (until .noaltmacro is seen).
This means that subsequent assembly code that calls other macros can
break if fpsimdmacros.h is included.
Since these instruction sequences are simple (if dull -- but in a
good way), this patch solves the problem by simply expanding the
.irp loops. The pre-existing fpsimd_{save,restore} macros weren't
rolled with .irp anyway and the sequences affected are short, so
this change restores consistency at little cost.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The {pgd,pud,pmd}_bad family of macros have slightly fuzzy
cross-architecture semantics, and seem to imply a populated entry that
is not a next-level table, rather than a particular type of entry (e.g.
a section map).
In arm64 code, for those cases where we care about whether an entry is a
section mapping, we can instead use the {pud,pmd}_sect macros to
explicitly check for this case. This helps to document precisely what we
care about, making the code easier to read, and allows for future
relaxation of the *_bad macros to check for other "bad" entries.
To that end this patch updates the table dumping and initial table setup
to check for section mappings with {pud,pmd}_sect, and adds/restores
BUG_ON(*_bad((*p)) checks after we've handled the *_sect and *_none
cases so as to catch remaining "bad" cases.
In the fault handling code, show_pte is left with *_bad checks as it
only cares about whether it can walk the next level table, and this path
is used for both kernel and userspace fault handling. The former case
will be followed by a die() where we'll report the address that
triggered the fault, which can be useful context for debugging.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In paging_init, we call flush_cache_all, but this is backed by Set/Way
operations which may not achieve anything in the presence of cache line
migration and/or system caches. If the caches are already in an
inconsistent state at this point, there is nothing we can do (short of
flushing the entire physical address space by VA) to empty architected
and system caches. As such, flush_cache_all only serves to mask other
potential bugs. Hence, this patch removes the boot-time call to
flush_cache_all.
Immediately after the cache maintenance we flush the TLBs, but this is
also unnecessary. Before enabling the MMU, the TLBs are invalidated, and
thus are initially clean. When changing the contents of active tables
(e.g. in fixup_executable() for DEBUG_RODATA) we perform the required
TLB maintenance following the update, and therefore no additional
maintenance is required to ensure the new table entries are in effect.
Since activating the MMU we will not have modified system register
fields permitted to be cached in a TLB, and therefore do not need
maintenance for any cached system register fields. Hence, the TLB flush
is unnecessary.
Shortly after the unnecessary TLB flush, we update TTBR0 to point to an
empty zero page rather than the idmap, and flush the TLBs. This
maintenance is necessary to remove the global idmap entries from the
TLBs (as they would conflict with userspace mappings), and is retained.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For 64K page system, after mapping a PMD section, the corresponding initial
page table is not needed any more. That page can be freed.
Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
[catalin.marinas@arm.com: added BUG_ON() to catch late memblock freeing]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARM64_CPU_SUSPEND config option was introduced to make code providing
context save/restore selectable only on platforms requiring power
management capabilities.
Currently ARM64_CPU_SUSPEND depends on the PM_SLEEP config option which
in turn is set by the SUSPEND config option.
The introduction of CPU_IDLE for arm64 requires that code configured
by ARM64_CPU_SUSPEND (context save/restore) should be compiled in
in order to enable the CPU idle driver to rely on CPU operations
carrying out context save/restore.
The ARM64_CPUIDLE config option (ARM64 generic idle driver) is therefore
forced to select ARM64_CPU_SUSPEND, even if there may be (ie PM_SLEEP)
failed dependencies, which is not a clean way of handling the kernel
configuration option.
For these reasons, this patch removes the ARM64_CPU_SUSPEND config option
and makes the context save/restore dependent on CPU_PM, which is selected
whenever either SUSPEND or CPU_IDLE are configured, cleaning up dependencies
in the process.
This way, code previously configured through ARM64_CPU_SUSPEND is
compiled in whenever a power management subsystem requires it to be
present in the kernel (SUSPEND || CPU_IDLE), which is the behaviour
expected on ARM64 kernels.
The cpu_suspend and cpu_init_idle CPU operations are added only if
CPU_IDLE is selected, since they are CPU_IDLE specific methods and
should be grouped and defined accordingly.
PSCI CPU operations are updated to reflect the introduced changes.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As with x86, mark the sys_call_table const such that it will be placed
in the .rodata section. This will cause attempts to modify the table
(accidental or deliberate) to fail when strict page permissions are in
place. In the absence of strict page permissions, there should be no
functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch moves the sys_rt_sigreturn_wrapper prototype to
arch/arm64/kernel/sys.c and removes the asm/syscalls.h header.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Unlike the sys_call_table[], the compat one was implemented in sys32.S
making it impossible to notice discrepancies between the number of
compat syscalls and the __NR_compat_syscalls macro, the latter having to
be defined in asm/unistd.h as including asm/unistd32.h would cause
conflicts on __NR_* definitions. With this patch, incorrect
__NR_compat_syscalls values will result in a build-time error.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
arm64 defines its own ucontext structure which is incompatible with the
struct defined (and exposed to userspace by) the asm-generic headers.
glibc carries its own struct definition that is compatible with the
arm64 definition, but we should expose our format in the uapi headers in
case other libraries want to make use of the ucontext pushed as part of
an arm64 sigframe.
This patch moves the arm64 asm/ucontext.h to the uapi headers, along
with the necessary #include of linux/types.h.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 9a46ad6d6d "smp: make smp_call_function_many() use logic
similar to smp_call_function_single()" has unified the way to handle
single and multiple cross-CPU function calls. Now only one interrupt
is needed for architecture specific code to support generic SMP function
call interfaces, so kill the redundant single function call interrupt.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Emulate deprecated 'setend' instruction for AArch32 bit tasks.
setend [le/be] - Sets the endianness of EL0
On systems with CPUs which support mixed endian at EL0, the hardware
support for the instruction can be enabled by setting the SCTLR_EL1.SED
bit. Like the other emulated instructions it is controlled by an entry in
/proc/sys/abi/. For more information see :
Documentation/arm64/legacy_instructions.txt
The instruction is emulated by setting/clearing the SPSR_EL1.E bit, which
will be reflected in the PSTATE.E in AArch32 context.
This patch also restores the native endianness for the execution of signal
handlers, since the process could have changed the endianness.
Note: All CPUs on the system must have mixed endian support at EL0. Once the
handler is registered, hotplugging a CPU which doesn't support mixed endian,
could lead to unexpected results/behavior in applications.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As of now each insn_emulation has a cpu hotplug notifier that
enables/disables the CPU feature bit for the functionality. This
patch re-arranges the code, such that there is only one notifier
that runs through the list of registered emulation hooks and runs
their corresponding set_hw_mode.
We do nothing when a CPU is dying as we will set the appropriate bits
as it comes back online based on the state of the hooks.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
[catalin.marinas@arm.com: fix pr_warn compilation error]
[catalin.marinas@arm.com: remove unnecessary "insn" check]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch keeps track of the mixed endian EL0 support across
the system and provides helper functions to export it. The status
is a boolean indicating whether all the CPUs on the system supports
mixed endian at EL0.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the necessary call to of_iommu_init.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since dev_archdata now has a dma_coherent state, combine the two
coherent and non-coherent operations and remove their declaration,
together with set_dma_ops, from the arch dma-mapping.h file.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We initialise the SCTLR_EL1 value by read-modify-writeback
of the desired bits, leaving the other bits (including reserved
bits(RESx)) untouched. However, sometimes the boot monitor could
leave garbage values in the RESx bits which could have different
implications. This patch makes sure that all the bits, including
the RESx bits, are set to the proper state, except for the
'endianness' control bits, EE(25) & E0E(24)- which are set early
in the el2_setup.
Updated the state of the Bit[6] in the comment to RES0 in the
comment.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 dump code is currently relying on some definitions which are
pulled in via transitive dependencies. It seems we have implicit
dependencies on the following definitions:
* MODULES_VADDR (asm/memory.h)
* MODULES_END (asm/memory.h)
* PAGE_OFFSET (asm/memory.h)
* PTE_* (asm/pgtable-hwdef.h)
* ENOMEM (linux/errno.h)
* device_initcall (linux/init.h)
This patch ensures we explicitly include the relevant headers for the
above items, fixing the observed build issue and hopefully preventing
future issues as headers are refactored.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
PCI IO space was intended to be 16MiB, at 32MiB below MODULES_VADDR, but
commit d1e6dc91b5 ("arm64: Add architectural support for PCI")
extended this to cover the full 32MiB. The final 8KiB of this 32MiB is
also allocated for the fixmap, allowing for potential clashes between
the two.
This change was masked by assumptions in mem_init and the page table
dumping code, which assumed the I/O space to be 16MiB long through
seaparte hard-coded definitions.
This patch changes the definition of the PCI I/O space allocation to
live in asm/memory.h, along with the other VA space allocations. As the
fixmap allocation depends on the number of fixmap entries, this is moved
below the PCI I/O space allocation. Both the fixmap and PCI I/O space
are guarded with 2MB of padding. Sites assuming the I/O space was 16MiB
are moved over use new PCI_IO_{START,END} definitions, which will keep
in sync with the size of the IO space (now restored to 16MiB).
As a useful side effect, the use of the new PCI_IO_{START,END}
definitions prevents a build issue in the dumping code due to a (now
redundant) missing include of io.h for PCI_IOBASE.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: reorder FIXADDR and PCI_IO address_markers_idx enum]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that the create_mapping() code in mm/mmu.c is able to support
setting up kernel page tables at initcall time, we can move the whole
virtmap creation to arm64_enable_runtime_services() instead of having
a distinct stage during early boot. This also allows us to drop the
arm64-specific EFI_VIRTMAP flag.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add page protections for arm64 similar to those in arm.
This is for security reasons to prevent certain classes
of exploits. The current method:
- Map all memory as either RWX or RW. We round to the nearest
section to avoid creating page tables before everything is mapped
- Once everything is mapped, if either end of the RWX section should
not be X, we split the PMD and remap as necessary
- When initmem is to be freed, we change the permissions back to
RW (using stop machine if necessary to flush the TLB)
- If CONFIG_DEBUG_RODATA is set, the read only sections are set
read only.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When kernel text is marked as read only, it cannot be modified directly.
Use a fixmap to modify the text instead in a similar manner to
x86 and arm.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When booting with EFI, we acquire the EFI memory map after parsing the
early params. This unfortuantely renders the option useless as we call
memblock_enforce_memory_limit (which uses memblock_remove_range behind
the scenes) before we've added any memblocks. We end up removing
nothing, then adding all of memory later when efi_init calls
reserve_regions.
Instead, we can log the limit and apply this later when we do the rest
of the memblock work in memblock_init, which should work regardless of
the presence of EFI. At the same time we may as well move the early
parameter into arm64's mm/init.c, close to arm64_memblock_init.
Any memory which must be mapped (e.g. for use by EFI runtime services)
must be mapped explicitly reather than relying on the linear mapping,
which may be truncated as a result of a mem= option passed on the kernel
command line.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When remapping the UEFI memory map using ioremap_cache(), we
have to deal with potential failure. Note that, even if the
common case is for ioremap_cache() to return the existing linear
mapping of the memory map, we cannot rely on that to be always the
case, e.g., in the presence of a mem= kernel parameter.
At the same time, remove a stale comment and move the memmap code
together.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 kernel builds fine without the libgcc. Actually it should not
be used at all in the kernel. The following are the reasons indicated
by Russell King:
Although libgcc is part of the compiler, libgcc is built with the
expectation that it will be running in userland - it expects to link
to a libc. That's why you can't build libgcc without having the glibc
headers around.
[...]
Meanwhile, having the kernel build the compiler support functions that
it needs ensures that (a) we know what compiler support functions are
being used, (b) we know the implementation of those support functions
are sane for use in the kernel, (c) we can build them with appropriate
compiler flags for best performance, and (d) we remove an unnecessary
dependency on the build toolchain.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To aid the developer when something triggers an unexpected exception,
decode the ESR_ELx.EC field when logging an ESR_ELx value using the
newly introduced esr_get_class_string. This doesn't tell the developer
the specifics of the exception encoded in the remaining IL and ISS bits,
but it can be helpful to distinguish between exception classes (e.g.
SError and a data abort) without having to manually decode the field,
which can be tiresome.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Now that all users have been moved over to the common ESR_ELx_* macros,
remove the redundant ESR_EL2 macros. To maintain compatibility with the
fault handling code shared with 32-bit, the FSC_{FAULT,PERM} macros are
retained as aliases for the common ESR_ELx_FSC_{FAULT,PERM} definitions.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Now that all users have been moved over to the common ESR_ELx_* macros,
remove the redundant ESR_EL1 macros.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Now that we have common ESR_ELx macros, make use of them in the arm64
KVM code. The addition of <asm/esr.h> to the include path highlighted
badly ordered (i.e. not alphabetical) include lists; these are changed
to alphabetical order.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
To aid the developer when something triggers an unexpected exception,
decode the ESR_ELx.EC field when logging an ESR_ELx value. This doesn't
tell the developer the specifics of the exception encoded in the
remaining IL and ISS bits, but it can be helpful to distinguish between
exception classes (e.g. SError and a data abort) without having to
manually decode the field, which can be tiresome.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Now that we have common ESR_ELx_* macros, move the core arm64 code over
to them.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Currently we have separate ESR_EL{1,2}_* macros, despite the fact that
the encodings are common. While encodings are architected to refer to
the current EL or a lower EL, the macros refer to particular ELs (e.g.
ESR_ELx_EC_DABT_EL0). Having these duplicate definitions is redundant,
and their naming is misleading.
This patch introduces common ESR_ELx_* macros that can be used in all
cases, in preparation for later patches which will migrate existing
users over. Some additional cleanups are made in the process:
* Suffixes for particular exception levelts (e.g. _EL0, _EL1) are
replaced with more general _LOW and _CUR suffixes, matching the
architectural intent.
* ESR_ELx_EC_WFx, rather than ESR_ELx_EC_WFI is introduced, as this
EC encoding covers traps from both WFE and WFI. Similarly,
ESR_ELx_WFx_ISS_WFE rather than ESR_ELx_EC_WFI_ISS_WFE is introduced.
* Multi-bit fields are given consistently named _SHIFT and _MASK macros.
* UL() is used for compatiblity with assembly files.
* Comments are added for currently unallocated ESR_ELx.EC encodings.
For fields other than ESR_ELx.EC, macros are only implemented for fields
for which there is already an ESR_EL{1,2}_* macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
This patch adds support for cacheinfo on ARM64.
On ARMv8, the cache hierarchy can be identified through Cache Level ID
(CLIDR) register while the cache geometry is provided by Cache Size ID
(CCSIDR) register.
Since the architecture doesn't provide any way of detecting the cpus
sharing particular cache, device tree is used for the same purpose.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The cachepolicy kernel parameter was intended to aid in the debugging of
coherency issues, but it is fundamentally broken for several reasons:
* On SMP platforms, only the boot CPU's tcr_el1 is altered. Secondary
CPUs may therefore use differ w.r.t. the attributes they apply to
MT_NORMAL memory, resulting in a loss of coherency.
* The cache maintenance using flush_dcache_all (based on Set/Way
operations) is not guaranteed to empty a given CPU's cache hierarchy
while said CPU has caches enabled, it cannot empty the caches of
other coherent PEs, nor is it guaranteed to flush data to the PoC
even when caches are disabled.
* The TLBs are not invalidated around the modification of MAIR_EL1 and
TCR_EL1, as required by the architecture (as both are permitted to be
cached in a TLB). This may result in CPUs using attributes other than
those expected for some memory accesses, resulting in a loss of
coherency.
* Exclusive accesses are not architecturally guaranteed to function as
expected on memory marked as Write-Through or Non-Cacheable. Thus
changing the attributes of MT_NORMAL away from the (architecurally
safe) defaults may cause uses of these instructions (e.g. atomics) to
behave erratically.
Given this, the cachepolicy code cannot be used for debugging purposes
as it alone is likely to cause coherency issues. This patch removes the
broken cachepolicy code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that we have moved the call to SetVirtualAddressMap() to the stub,
UEFI has no use for the ID map, so we can drop the code that installs
ID mappings for UEFI memory regions.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that we are calling SetVirtualAddressMap() from the stub, there is no
need to reserve boot-only memory regions, which implies that there is also
no reason to free them again later.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In order to support kexec, the kernel needs to be able to deal with the
state of the UEFI firmware after SetVirtualAddressMap() has been called.
To avoid having separate code paths for non-kexec and kexec, let's move
the call to SetVirtualAddressMap() to the stub: this will guarantee us
that it will only be called once (since the stub is not executed during
kexec), and ensures that the UEFI state is identical between kexec and
normal boot.
This implies that the layout of the virtual mapping needs to be created
by the stub as well. All regions are rounded up to a naturally aligned
multiple of 64 KB (for compatibility with 64k pages kernels) and recorded
in the UEFI memory map. The kernel proper reads those values and installs
the mappings in a dedicated set of page tables that are swapped in during
UEFI Runtime Services calls.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Set EFI_ALLOC_ALIGN to 64 KB so that all allocations done by the stub
are naturally compatible with a 64 KB granule kernel.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
For UEFI, we need to install the memory mappings used for Runtime Services
in a dedicated set of page tables. Add create_pgd_mapping(), which allows
us to allocate and install those page table entries early.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, swapper_pg_dir and idmap_pg_dir share the init_mm mm_struct
instance. To allow the introduction of other pg_dir instances, for instance,
for UEFI's mapping of Runtime Services, make the struct_mm instance an
explicit argument that gets passed down to the pmd and pte instantiation
functions. Note that the consumers (pmd_populate/pgd_populate) of the
mm_struct argument don't actually inspect it, but let's fix it for
correctness' sake.
Acked-by: Steve Capper <steve.capper@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also some kernel side fixes: uncore PMU
driver fix, user regs sampling fix and an instruction decoder fix that
unbreaks PEBS precise sampling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
perf/x86_64: Improve user regs sampling
perf: Move task_pt_regs sampling into arch code
x86: Fix off-by-one in instruction decoder
perf hists browser: Fix segfault when showing callchain
perf callchain: Free callchains when hist entries are deleted
perf hists: Fix children sort key behavior
perf diff: Fix to sort by baseline field by default
perf list: Fix --raw-dump option
perf probe: Fix crash in dwarf_getcfi_elf
perf probe: Fix to fall back to find probe point in symbols
perf callchain: Append callchains only when requested
perf ui/tui: Print backtrace symbols when segfault occurs
perf report: Show progress bar for output resorting
On x86_64, at least, task_pt_regs may be only partially initialized
in many contexts, so x86_64 should not use it without extra care
from interrupt context, let alone NMI context.
This will allow x86_64 to override the logic and will supply some
scratch space to use to make a cleaner copy of user regs.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: chenggang.qcg@taobao.com
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/e431cd4c18c2e1c44c774f10758527fb2d1025c4.1420396372.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The early ioremap support introduced by patch bf4b558eba
("arm64: add early_ioremap support") failed to add a call to
early_ioremap_reset() at an appropriate time. Without this call,
invocations of early_ioremap etc. that are done too late will go
unnoticed and may cause corruption.
This is exactly what happened when the first user of this feature
was added in patch f84d02755f ("arm64: add EFI runtime services").
The early mapping of the EFI memory map is unmapped during an early
initcall, at which time the early ioremap support is long gone.
Fix by adding the missing call to early_ioremap_reset() to
setup_arch(), and move the offending early_memunmap() to right after
the point where the early mapping of the EFI memory map is last used.
Fixes: f84d02755f ("arm64: add EFI runtime services")
Cc: <stable@vger.kernel.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On next-20150105, defconfig compilation breaks with:
arch/arm64/kernel/smp_spin_table.c:80:2: error: implicit declaration of function ‘ioremap_cache’ [-Werror=implicit-function-declaration]
arch/arm64/kernel/smp_spin_table.c:92:2: error: implicit declaration of function ‘writeq_relaxed’ [-Werror=implicit-function-declaration]
arch/arm64/kernel/smp_spin_table.c:101:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
Fix by including asm/io.h, which contains definitions or prototypes
for these macros or functions.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On next-20150105, defconfig compilation breaks with:
arch/arm64/kernel/module.c:408:4: error: implicit declaration of function ‘apply_alternatives’ [-Werror=implicit-function-declaration]
Fix by including asm/alternative.h, where the apply_alternatives()
prototype is declared.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On next-20150105, defconfig compilation breaks with:
./arch/arm64/include/asm/arch_timer.h:112:2: error: implicit declaration of function ‘BUG’ [-Werror=implicit-function-declaration]
Fix by including linux/bug.h, where the BUG macro is defined.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
