1) Use msecs_to_jiffies() instead of calculating by hand.
2) Call cancel_delayed_work_sync() instead of cancel_delayed_work()
followed by a separate flush_workqueue().
3) Remove the "tsc->wq = 0;" Sparse complains about that because
tsc->wq is a pointer, not an int. It's not needed because we just
free the pointer anyway.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set
powerpc/44x: icon: select SM502 and frame buffer console support
powerpc/85xx: Add P1021MDS board support
powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing
powerpc/fsl_msi: add removal path and probe failing path
powerpc/fsl_msi: enable msi sharing through AMP OSes
powerpc/fsl_msi: enable msi allocation in all banks
powerpc/fsl_msi: fix the conflict of virt_msir's chip_data
powerpc/fsl_msi: Add multiple MSI bank support
powerpc/kexec: Add support for FSL-BookE
powerpc/fsl-booke: Move the entry setup code into a seperate file
powerpc/fsl-booke: fix the case where we are not in the first page
powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
powerpc/fsl-booke: Add hibernation support for FSL BookE processors
powerpc/e500mc: Implement machine check handler.
powerpc/44x: Add basic ICON PPC440SPe board support
powerpc/44x: Fix UART clocks on 440SPe
powerpc/44x: Add reset-type to katmai.dts
powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits)
drm/i915: add HAS_BSD check to i915_getparam
drm/i915: Honor sync polarity from VBT panel timing descriptors
drm/i915: Unmask interrupt for render engine on Sandybridge
drm/i915: Fix PIPE_CONTROL command on Sandybridge
drm/i915: Fix up address spaces in slow_kernel_write()
drm/i915: Use non-atomic kmap for slow copy paths
drm/i915: Avoid moving from CPU domain during pwrite
drm/i915: Cleanup after failed initialization of ringbuffers
drm/i915: Reject bind_to_gtt() early if object > aperture
drm/i915: Check error code whilst moving buffer to GTT domain.
drm/i915: Remove spurious warning "Failure to install fence"
drm/i915: Rebind bo if currently bound with incorrect alignment.
drm/i915: Include pitch in set_base debug statement.
drm/i915: Only print "nothing to do" debug message as required.
drm/i915: Propagate error from unbinding an unfenceable object.
drm/i915: Avoid nesting of domain changes when setting display plane
drm/i915: Hold the spinlock whilst resetting unpin_work along error path
drm/i915: Only print an message if there was an error
drm/i915: Clean up leftover bits from hws move to ring structure.
drm/i915: Add CxSR support on Pineview DDR3
...
fscache_write_op() makes unnecessary checks of the page variable to see if it
is NULL. It can't be NULL at those points as the kernel would already have
crashed a little higher up where we examined page->index.
Furthermore, unless radix_tree_gang_lookup_tag() can return 1 but no page, a
NULL pointer crash should not be encountered there as we can only get there if
r_t_g_l_t() returned 1.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we use plain 'perf buildid-list' we use only what is in the buildid
table in the perf.data header. And those have absolute pathnames because
at 'perf record' time we used __perf_session__process_events and that
doesn't sets up the path shortening code in map__new() that happens if
symbol_conf.full_paths is false, the default.
On the other hand, when we use 'perf buildid-list --with-hits' we
process all the events using perf_session__process_events, adding
entries to the global DSO list _after_ removing the current directory
from the DSO name, for presentation purposes.
Because of that we end up having two entries in the DSO list when
recording events for binaries using relative pathnames.
Fix it minimally by setting symbol_conf.full_paths to true when marking
the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf
archive'
Right fix longer term is to shorten the path only at presentation time.
Will be done for 2.6.36.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100601183837.GC4093@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dialog token allocator has apparently been broken
since b83f4e15 ("mac80211: fix deadlock in sta->lock")
because it got moved out under the spinlock. Fix it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Daniel reported that the paged RX changes had
broken blockack request frame processing due
to using data that wasn't really part of the
skb data.
Fix this using skb_copy_bits() for the needed
data. As a side effect, this adds a check on
processing too short frames, which previously
this code could do.
Reported-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We can wake all queues after a chip reset since everything should be set up and
we are ready to transmit. If we don't do that we might end up starting up with
stopped queues, not beeing able to transmit. (This started to happen after
"ath5k: clean up queue manipulation" but since periodic calibration also
stopped and started the queues this effect was hidden most of the time).
This way we can also get rid of the superfluous ath5k_reset_wake() function.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This will let userland only try to use the new media decode
functionality when the appropriate kernel is present.
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
I'm actually kind of shocked that it works at all otherwise.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Commit 315e995c63 is causing OOM kills
when stress-testing a CIFS filesystem. The VFS readpages operation takes
a page reference. The older code just handed this reference off to the
page cache, but the new code takes an extra one. The simplest fix is to
put the new reference after add_to_page_cache_lru.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We should only build hpet_example on x86[-64], where it is implemented.
It can cause build errors on other architectures.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a possible null pointer dereference in afs_alloc_server(): the server
pointer is NULL if there was an allocation failure, and under such a
condition, we can't dereference it in the _leave() statement.
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit e9fb7631eb ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") the new helper functions access
cpu_chain. As a result, it shouldn't be marked __cpuinitdata (via
section mismatch warning).
Alternatively, the helper functions should be forced inline, or marked
__ref or __cpuinit. In the meantime, this patch silences the warning
the trivial way.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We never actually use the return value of sfi_sysfs_install_table() but
it still seems wrong to return a freed pointer.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
kbuild: Revert part of e8d400a to resolve a conflict
kbuild: Fix checking of scm-identifier variable
gconfig: add support to show hidden options that have prompts
menuconfig: add support to show hidden options which have prompts
gconfig: remove show_debug option
gconfig: remove dbg_print_ptype() and dbg_print_stype()
kconfig: fix zconfdump()
kconfig: some small fixes
add random binaries to .gitignore
kbuild: Include gen_initramfs_list.sh and the file list in the .d file
kconfig: recalc symbol value before showing search results
.gitignore: ignore *.lzo files
headerdep: perlcritic warning
scripts/Makefile.lib: Align the output of LZO
kbuild: Generate modules.builtin in make modules_install
Revert "kbuild: specify absolute paths for cscope"
kbuild: Do not unnecessarily regenerate modules.builtin
headers_install: use local file handles
headers_check: fix perl warnings
export_report: fix perl warnings
...
* 'for-linus' of git://www.jni.nu/cris:
CRIS: Don't use mask_irq as symbol name
CRIS: Simplify param.h by simply including <asm-generic/param.h>
CRISv10: Whitespace fixes for hw_settings.S
CRISv10: Trivial fixes.
CRISv32: Fix RS485 port 4 CD Kconfig item.
CRISv32: Remove duplicated Kconfig items.
cris: push down BKL into some device drivers
Commands with data must set the length in the message.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is held
ksz884x: Add missing validate_addr hook
ksz884x: convert to netdev_tx_t
virtio-net: pass gfp to add_buf
be2net: convert hdr.timeout in be_cmd_loopback_test() to le32
can: mpc5xxx_can.c: Fix build failure
net/ipv4/tcp_input.c: fix compilation breakage when FASTRETRANS_DEBUG > 1
net: sock_queue_err_skb() dont mess with sk_forward_alloc
netfilter: xtables: stackptr should be percpu
netfilter: don't xt_jumpstack_alloc twice in xt_register_table
greth: Fix build after OF device conversions.
net: fix sk_forward_alloc corruptions
Phonet: listening socket lock protects the connected socket list
caif: unlock on error path in cfserl_receive()
be2net: remove superfluous externs
be2net: add unlock on error path
net/rds: Add missing mutex_unlock
drivers/isdn/hardware/mISDN: Add missing spin_unlock
fs_enet: Adjust BDs after tx error
skb: make skb_recycle_check() return a bool value
...
clear_user() returns the number of bytes that could not be copied rather than
an error code. So we should return -EFAULT rather than directly returning the
results.
Without this patch, positive values may be returned to elf_fdpic_map_file()
and the following error handlings do not function as expected.
1.
ret = elf_fdpic_map_file_constdisp_on_uclinux(params, file, mm);
if (ret < 0)
return ret;
2.
ret = elf_fdpic_map_file_by_direct_mmap(params, file, mm);
if (ret < 0)
return ret;
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
CC: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9195291e5f added calls to
sched_clock() from preemptible code. sched_clock() is both the
wrong interface AND cannot be called without preempt disabled.
Apply a temporary fix to get rid of the warnings, a real patch
is in the works.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
I moved the range check after the increment. The current code would
write past the end of the array once before calling BUG().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
trace_unhandled() callback does not allow to access event fields, this patch
resolves the problem.
It can also been used as a more pythonic and flexible way for script writters
to demux event types
This will for example greatly simplify pytimechart event demux.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com>
Signed-off-by: Pierre Tardy <tardyp@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "Local READ/WRITE failed" messages are too verbose.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
using the global printk_ratelimit() may mask other messages.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
"canceled" w_read_retry_remote never completed, if they have been
canceled after drbd_disconnect connection teardown cleanup has already
run (or we are currently not connected anyways).
Fixed by not queueing a remote retry if we already know it won't work
(pdsk not uptodate), and cleanup ourselves on "cancel", in case we hit a
race with drbd_disconnect.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
drbd/drbd_receiver.c: linux/mm.h is included more than once.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It seems to improve performance if we allow the "p_data" header in its
own frame (no MSG_MORE), but sendpage all but the last page with MSG_MORE.
This is also in preparation of a later zero copy receive implementation.
Suggested by Eduard.Guzovsky@stratus.com on drbd-dev.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
quoting tcp(7):
On individual connections, the socket buffer size must be set prior to the
listen(2) or connect(2) calls in order to have it take effect.
This adds a wrapper to do so, and uses it appropriately.
Improves performance in certain situations.
Note that because we cannot easily determine which socket will be
"meta" and wich "data" (bulk) socket, we adjust both sockets.
Previously, DRBD only adjusted the bufsizes of the "data" socket.
Thanks again to Eduard.Guzovsky@stratus.com.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
On Thu, Apr 29, 2010 at 04:00:50PM -0400, Eduard.Guzovsky@stratus.com
wrote on drbd-dev@lists.linbit.com
Subject: [Drbd-dev] DRBD small synchronous writes performance improvements
> 1. TCP_QUICKACK option is set incorrectly. The goal was force TCP to
> send and ACK as a "one time" event. Instead the code permanently sets
> connection in the QUICKACK mode.
He is right, we actually want to use an even val with TCP_QUICKACK.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The late-UUID writing is delayed until the next release.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Support discard requests in brd by zeroing or deleting the underlying backing
pages. This is simply to help with testing and documentation nature of
brd code.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This reverts commit e913fc825d.
We are investigating a hang associated with the WB_SYNC_NONE changes,
so revert them for now.
Conflicts:
fs/fs-writeback.c
mm/page-writeback.c
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This reverts commit 7c8a3554c6.
We are investigating a hang associated with the WB_SYNC_NONE changes,
so revert them for now.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
hist_entry__annotate() runs objdump with -S option so the output may contain
lines of any format. If a line starts with a colon strtoull() returns 0 and
calculated offset will be negative. This causes perf annotate segfaults.
Make sure that strtoull() has parsed at least one digit.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Konstantin Stepanyuk <konstantin.stepanyuk@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch implements a fallback to the GART IOMMU if this
is possible and the AMD IOMMU initialization failed.
Otherwise the fallback would be nommu which is very
problematic on machines with more than 4GB of memory or
swiotlb which hurts io-performance.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When request_mem_region fails the error path tries to
disable the IOMMUs. This accesses the mmio-region which was
not allocated leading to a kernel crash. This patch fixes
the issue.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
For CONFIG_PREEMPT=y kernels the sched_switch(.prev_state) argument isn't
useful because we can get preempted with current->state != TASK_RUNNING
without actually getting removed from the runqueue.
Cure this by treating all preempted tasks as runnable from the tracer's
point of view.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cautiously-acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1275322715.27810.23323.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike reports that since e9e9250b (sched: Scale down cpu_power due to RT
tasks), wake_affine() goes funny on RT tasks due to them still having a
!0 weight and wake_affine() still subtracts that from the rq weight.
Since nobody should be using se->weight for RT tasks, set the value to
zero. Also, since we now use ->cpu_power to normalize rq weights to
account for RT cpu usage, add that factor into the imbalance computation.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275316109.27810.22969.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function inittiger is only called from nj_init_card, where a lock is held.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@gfp exists@
identifier fn;
position p;
@@
fn(...) {
... when != spin_unlock_irqrestore
when any
GFP_KERNEL@p
... when any
}
@locked@
identifier gfp.fn;
@@
spin_lock_irqsave(...)
... when != spin_unlock_irqrestore
fn(...)
@depends on locked@
position gfp.p;
@@
- GFP_KERNEL@p
+ GFP_ATOMIC
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
