The release_firmware() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
The following bug was reported by sometime back:
https://lkml.org/lkml/2016/6/29/795
This commit fixes this bug by setting value for the prefix string.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The TDM mode using PCM format now has two-bit right shift due to the
format configuration in the driver. According to Figure 4-13 in the
CS53L30 datasheet, using ASP_SCLK_INV = 0 and SHIFT_LEFT = 1 should
be the correct combination to create one-bit right shift for the DSP
type A format.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The maximum slot number of CS53L30 is 4 while it should support
the situation that's less than 4 channels based on the rx_mask.
So when the driver validates the last slot location, it should
check the last active slot instead of always the 4th one.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The spdif mclk should be 128 times of sample rate, and there is a
internal divider, the real rate of spdif mclk is mclk / (div + 1).
Hence, the original driver always get the good frequency for
48000/96000/44100/192000. But for 32000, the mclk is incorrect,
it should be 32000*128, but get 48000*128. Do not use the internal
divider here, just set all mclk to 128 * sample rate directly.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card needs to get its card name.
This patch makes this method simple style standard.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card is creating dai_link->name / dai_link->stream_name.
These are based on CPU + Codec name, or "fe.CPU" or "be.Codec" if it
was DPCM.
This patch adds asoc_simple_card_set_dailink_name() and set dailink
name as common method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Thanks Mark and Anatol for the discussion. According to the result,
the standard C will translate any non-zero value into true, or
false otherwise.
QUOTE:
"6.3.1.2 Boolean type
When any scalar value is converted to _Bool, the result is 0 if the
value compares equal to 0; otherwise, the result is 1
"
Thus, the "!!" idiom is removed.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The original design only covers the jack insertion logic is active low.
Add more condition to cover no matter the logic is active low and high.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds HDMI audio output support to the MT8173 RT5650 machine
driver.
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following sparse warning:
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:72:5: warning:
symbol 'mt2701_dai_num_to_i2s' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core sets the snd_soc_pcm_runtime->dev drvdata to
snd_soc_pcm_runtime in soc_post_component_init, and access
it in places like codec_reg_show.
hsw_pcm_open overwrites the drvdata to point to hsw_pcm_data,
confusing soc-core, and causing crashes when cat
/sys/devices/pci0000:00/INT3438:00/.../System PCM/codec_reg
This patch removes the set in hsw_pcm_open since it's no longer
used. commit 7ff9d6714a ("ASoC: Intel: Split hsw_pcm_data for
playback and capture") already removed all calls to
snd_soc_pcm_get_drvdata(rtd).
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Like SKL we have skl_nau88l25_ssm4567 machine for KBL,
so add the ID for this machine too.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Like SKL we have skl_nau88l25_max98357a machine for KBL,
so add the ID for this machine too.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Like SKL, we have two more machines for KBL, so add these IDs
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform device id table expects names to be less that
20chars, so truncate the name in skl id table and
skl_nau88l25_max98357a machine.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform device id table expects names to be less that
20chars, so truncate the name in skl id table and
skl_nau88l25_ssm4567 machine.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
FW reload had two issues:
- We need to disable the core 0 on when fw fails
- Before loading firmware mark boot flag as false
This patch fixes these two
Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kabylake platform is similar to Skylake. So, add machine id.
Since same machine driver supports both, add these in id table.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Like in Skylake, Kabylake also uses combo jack so add Kabylake to
DMI match for combo jack configuration.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kabylake platform is similar to Skylake. So, add the device id.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kabylake is next generation Intel platform which has similar
audio controller to Skylake, so add the ID and driver data in
SKL driver.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we correctly error an attempt to execute an unsupported operation.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The module list was not initialized for Broxton DSP code, so
initialize it.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Static checker warns:
Pointer 'hlink' returned from call to function 'snd_hdac_ext_bus_get_link'
at line may be NULL and will be dereferenced"
So we should always check the return of snd_hdac_ext_bus_get_link() before
referencing the link pointer
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent commit [a92ea59b74: ASoC: Intel: sst: only select
sst-firmware when DW DMAC is built-in] introduced more strict kconfig
dependency (depends on DW_DMAC_CORE=y) for avoiding the build failures
due to dependency messes in intel-sst. This makes, however, it
impossible to use this driver with the modularized systems,
i.e. typically on Linux distros.
The problem addressed in the commit above is that sst_dsp_new() and
sst_dsp_free() includes the firmware init / finish that call dw_*()
functions. Thus building it as built-in with DW_DMAC_CORE module
results in the missing symbols.
However, these sst_dsp functions are basically called only from the
drivers that depend on DW_DMAC_CORE already. That is, once when these
functions are split out, the rest can be independent from dw stuff.
This patch attempts to solve the issue by the following:
- Split sst-dsp stuff into two modules: snd-soc-sst-dsp and
snd-soc-sst-firmware.
- Move sst_dsp_new() and sst_dsp_free() to the latter module so that
the former module can be independent from DW_DMAC_CORE.
- Add a new kconfig SND_SOC_INTEL_SST_FIRMWARE to select the latter
module by machine drivers.
One only remaining pitfall is that each machine driver has to select
SND_SOC_INTEL_SST_FIRMWARE carefully depending on DW_DMAC_CORE.
This can't be done cleanly due to the restriction of the current
kbuild.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=988117
Fixes: a92ea59b74 ('ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse rightly warns:
sound/soc/intel/atom/sst/sst_acpi.c:353:22: warning: symbol 'cht_quirk' was not declared. Should it be static?
So statify this
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kbuild bot reports that we might use dai_index uninitialized.
sound/soc/intel/boards/cht_bsw_rt5645.c:391:37: warning: 'dai_index' may be used uninitialized in this function [-Wmaybe-uninitialized]
Since it is theoretically possible, set it while initializing.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP expects the actual length of parameters that is set through
TLV to be passed in large config set, so pass the actual size
received in tlv_control_set() instead of max size.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it.
Also add DMI quirk for jack detection.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001
[Jack detection]
Suggested-by: Stephen Just <stephenjust@gmail.com>
Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
