Commit Graph

13 Commits

Author SHA1 Message Date
Silvio Fricke
2f643105e5 ARM: dts: imx6: edmqmx6: change enet reset pin
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-18 14:42:14 +08:00
Silvio Fricke
37183793f5 ARM: dts: imx6: edmqmx6: Add can bus
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:43 +08:00
Silvio Fricke
3c6c868594 ARM: dts: imx6: edmqmx6: Add two other i2c buses
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:42 +08:00
Silvio Fricke
fd101c4c56 ARM: dts: imx6: edmqmx6: Add PCIe support
Add support for the PCI express bus available on MX6 Data Modul
edm-qmx6 board.

Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:42 +08:00
Silvio Fricke
e59d28e896 ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:11 +08:00
Lucas Stach
819826a158 ARM: dts: imx6: edmqmx6: add SPI bus and flash
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:08 +08:00
Lucas Stach
d02f74aa75 ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:08 +08:00
Sascha Hauer
48f5196364 ARM: dts: Add stdout-path property to i.MX boards
This adds the stdout-path property to various i.MX boards. Values
of the property have been taken from barebox, so they should be
correct. Also, the older linux,stdout-path property is converted
to stdout-path.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:07 +08:00
Lucas Stach
52d13453df ARM: dts: imx6: edmqmx6: add second STMPE
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
Lucas Stach
8dde78e8d6 ARM: dts: imx6: edmqmx6: USB H1 only supports host mode
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
Sascha Hauer
465ca5dc4a ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator
GPIO7_12 switches the D+/D- USB lines on and off. When we use this as
VBUS regulator it means that USB device mode can never work as VBUS is
never turned on in Device mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
Lucas Stach
19f7cb6dec ARM: dts: imx6: edmqmx6: Fix usbotg id pin
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
Silvio F
c1f77e73a8 ARM: dts: imx6: Add support for imx6q dmo edmqmx6
Signed-off-by: Silvio F <silvio.fricke@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09 21:29:01 +08:00