mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
b4178ab58a
paride_register() returns 1 on success, 0 on failure and module init
code looks like
static int __init foo_init(void)
{
return paride_register(&foo) - 1;
}
which is not what one get used to. Converted to usual 0/-E convention.
In case of kbic driver, unwind registration. It was just
return (paride_register(&k951)||paride_register(&k971))-1;
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
317 lines
7.9 KiB
C
317 lines
7.9 KiB
C
/*
|
|
epia.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
|
|
Under the terms of the GNU General Public License.
|
|
|
|
epia.c is a low-level protocol driver for Shuttle Technologies
|
|
EPIA parallel to IDE adapter chip. This device is now obsolete
|
|
and has been replaced with the EPAT chip, which is supported
|
|
by epat.c, however, some devices based on EPIA are still
|
|
available.
|
|
|
|
*/
|
|
|
|
/* Changes:
|
|
|
|
1.01 GRG 1998.05.06 init_proto, release_proto
|
|
1.02 GRG 1998.06.17 support older versions of EPIA
|
|
|
|
*/
|
|
|
|
#define EPIA_VERSION "1.02"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/wait.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "paride.h"
|
|
|
|
/* mode codes: 0 nybble reads on port 1, 8-bit writes
|
|
1 5/3 reads on ports 1 & 2, 8-bit writes
|
|
2 8-bit reads and writes
|
|
3 8-bit EPP mode
|
|
4 16-bit EPP
|
|
5 32-bit EPP
|
|
*/
|
|
|
|
#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
|
|
#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
|
|
|
|
/* cont = 0 IDE register file
|
|
cont = 1 IDE control registers
|
|
*/
|
|
|
|
static int cont_map[2] = { 0, 0x80 };
|
|
|
|
static int epia_read_regr( PIA *pi, int cont, int regr )
|
|
|
|
{ int a, b, r;
|
|
|
|
regr += cont_map[cont];
|
|
|
|
switch (pi->mode) {
|
|
|
|
case 0: r = regr^0x39;
|
|
w0(r); w2(1); w2(3); w0(r);
|
|
a = r1(); w2(1); b = r1(); w2(4);
|
|
return j44(a,b);
|
|
|
|
case 1: r = regr^0x31;
|
|
w0(r); w2(1); w0(r&0x37);
|
|
w2(3); w2(5); w0(r|0xf0);
|
|
a = r1(); b = r2(); w2(4);
|
|
return j53(a,b);
|
|
|
|
case 2: r = regr^0x29;
|
|
w0(r); w2(1); w2(0X21); w2(0x23);
|
|
a = r0(); w2(4);
|
|
return a;
|
|
|
|
case 3:
|
|
case 4:
|
|
case 5: w3(regr); w2(0x24); a = r4(); w2(4);
|
|
return a;
|
|
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void epia_write_regr( PIA *pi, int cont, int regr, int val)
|
|
|
|
{ int r;
|
|
|
|
regr += cont_map[cont];
|
|
|
|
switch (pi->mode) {
|
|
|
|
case 0:
|
|
case 1:
|
|
case 2: r = regr^0x19;
|
|
w0(r); w2(1); w0(val); w2(3); w2(4);
|
|
break;
|
|
|
|
case 3:
|
|
case 4:
|
|
case 5: r = regr^0x40;
|
|
w3(r); w4(val); w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define WR(r,v) epia_write_regr(pi,0,r,v)
|
|
#define RR(r) (epia_read_regr(pi,0,r))
|
|
|
|
/* The use of register 0x84 is entirely unclear - it seems to control
|
|
some EPP counters ... currently we know about 3 different block
|
|
sizes: the standard 512 byte reads and writes, 12 byte writes and
|
|
2048 byte reads (the last two being used in the CDrom drivers.
|
|
*/
|
|
|
|
static void epia_connect ( PIA *pi )
|
|
|
|
{ pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
|
|
w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
|
|
w2(1); w2(4);
|
|
if (pi->mode >= 3) {
|
|
w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
|
|
w2(0x24); w2(0x26); w2(4);
|
|
}
|
|
WR(0x86,8);
|
|
}
|
|
|
|
static void epia_disconnect ( PIA *pi )
|
|
|
|
{ /* WR(0x84,0x10); */
|
|
w0(pi->saved_r0);
|
|
w2(1); w2(4);
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
}
|
|
|
|
static void epia_read_block( PIA *pi, char * buf, int count )
|
|
|
|
{ int k, ph, a, b;
|
|
|
|
switch (pi->mode) {
|
|
|
|
case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
|
|
ph = 1;
|
|
for (k=0;k<count;k++) {
|
|
w2(2+ph); a = r1();
|
|
w2(4+ph); b = r1();
|
|
buf[k] = j44(a,b);
|
|
ph = 1 - ph;
|
|
}
|
|
w0(0); w2(4);
|
|
break;
|
|
|
|
case 1: w0(0x91); w2(1); w0(0x10); w2(3);
|
|
w0(0x51); w2(5); w0(0xd1);
|
|
ph = 1;
|
|
for (k=0;k<count;k++) {
|
|
w2(4+ph);
|
|
a = r1(); b = r2();
|
|
buf[k] = j53(a,b);
|
|
ph = 1 - ph;
|
|
}
|
|
w0(0); w2(4);
|
|
break;
|
|
|
|
case 2: w0(0x89); w2(1); w2(0x23); w2(0x21);
|
|
ph = 1;
|
|
for (k=0;k<count;k++) {
|
|
w2(0x24+ph);
|
|
buf[k] = r0();
|
|
ph = 1 - ph;
|
|
}
|
|
w2(6); w2(4);
|
|
break;
|
|
|
|
case 3: if (count > 512) WR(0x84,3);
|
|
w3(0); w2(0x24);
|
|
for (k=0;k<count;k++) buf[k] = r4();
|
|
w2(4); WR(0x84,0);
|
|
break;
|
|
|
|
case 4: if (count > 512) WR(0x84,3);
|
|
w3(0); w2(0x24);
|
|
for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
|
|
w2(4); WR(0x84,0);
|
|
break;
|
|
|
|
case 5: if (count > 512) WR(0x84,3);
|
|
w3(0); w2(0x24);
|
|
for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
|
|
w2(4); WR(0x84,0);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
static void epia_write_block( PIA *pi, char * buf, int count )
|
|
|
|
{ int ph, k, last, d;
|
|
|
|
switch (pi->mode) {
|
|
|
|
case 0:
|
|
case 1:
|
|
case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
|
|
ph = 0; last = 0x8000;
|
|
for (k=0;k<count;k++) {
|
|
d = buf[k];
|
|
if (d != last) { last = d; w0(d); }
|
|
w2(4+ph);
|
|
ph = 1 - ph;
|
|
}
|
|
w2(7); w2(4);
|
|
break;
|
|
|
|
case 3: if (count < 512) WR(0x84,1);
|
|
w3(0x40);
|
|
for (k=0;k<count;k++) w4(buf[k]);
|
|
if (count < 512) WR(0x84,0);
|
|
break;
|
|
|
|
case 4: if (count < 512) WR(0x84,1);
|
|
w3(0x40);
|
|
for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
|
|
if (count < 512) WR(0x84,0);
|
|
break;
|
|
|
|
case 5: if (count < 512) WR(0x84,1);
|
|
w3(0x40);
|
|
for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
|
|
if (count < 512) WR(0x84,0);
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
static int epia_test_proto( PIA *pi, char * scratch, int verbose )
|
|
|
|
{ int j, k, f;
|
|
int e[2] = {0,0};
|
|
|
|
epia_connect(pi);
|
|
for (j=0;j<2;j++) {
|
|
WR(6,0xa0+j*0x10);
|
|
for (k=0;k<256;k++) {
|
|
WR(2,k^0xaa);
|
|
WR(3,k^0x55);
|
|
if (RR(2) != (k^0xaa)) e[j]++;
|
|
}
|
|
WR(2,1); WR(3,1);
|
|
}
|
|
epia_disconnect(pi);
|
|
|
|
f = 0;
|
|
epia_connect(pi);
|
|
WR(0x84,8);
|
|
epia_read_block(pi,scratch,512);
|
|
for (k=0;k<256;k++) {
|
|
if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
|
|
if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
|
|
}
|
|
WR(0x84,0);
|
|
epia_disconnect(pi);
|
|
|
|
if (verbose) {
|
|
printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
|
|
pi->device,pi->port,pi->mode,e[0],e[1],f);
|
|
}
|
|
|
|
return (e[0] && e[1]) || f;
|
|
|
|
}
|
|
|
|
|
|
static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
|
|
|
|
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
|
|
"EPP-8","EPP-16","EPP-32"};
|
|
|
|
printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
|
|
pi->device,EPIA_VERSION,pi->port);
|
|
printk("mode %d (%s), delay %d\n",pi->mode,
|
|
mode_string[pi->mode],pi->delay);
|
|
|
|
}
|
|
|
|
static struct pi_protocol epia = {
|
|
.owner = THIS_MODULE,
|
|
.name = "epia",
|
|
.max_mode = 6,
|
|
.epp_first = 3,
|
|
.default_delay = 1,
|
|
.max_units = 1,
|
|
.write_regr = epia_write_regr,
|
|
.read_regr = epia_read_regr,
|
|
.write_block = epia_write_block,
|
|
.read_block = epia_read_block,
|
|
.connect = epia_connect,
|
|
.disconnect = epia_disconnect,
|
|
.test_proto = epia_test_proto,
|
|
.log_adapter = epia_log_adapter,
|
|
};
|
|
|
|
static int __init epia_init(void)
|
|
{
|
|
return paride_register(&epia);
|
|
}
|
|
|
|
static void __exit epia_exit(void)
|
|
{
|
|
paride_unregister(&epia);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
module_init(epia_init)
|
|
module_exit(epia_exit)
|