linux

include/mach

[ARM] pxa: remove duplicate mfp definition in mach

2009-09-10 18:49:24 +08:00

am200epd.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

am300epd.c

[ARM] 5354/1: mach-pxa: add AM300 platform driver v3

2009-02-10 11:28:00 +00:00

clock.c

[ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c

2009-06-04 17:45:43 +01:00

clock.h

[ARM] pxa: remove left-over struct clk *other field from struct clk

2009-09-10 18:49:23 +08:00

cm-x2xx-pci.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

cm-x2xx-pci.h

[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255

2008-10-07 12:05:05 +01:00

cm-x2xx.c

[ARM] pxa/cm-x2xx: fix ucb1400 not being registered

2009-04-04 10:26:34 +08:00

cm-x255.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

cm-x270.c

[ARM] pxa/em-x270, cm-x270: use DEEPSLEEP for PM_SUSPEND_MEM

2009-06-05 10:50:25 +08:00

cm-x300.c

[ARM] pxa/cm-x300: add .fixup method to enable second DRAM bank

2009-06-05 10:50:27 +08:00

colibri-pxa3xx.c

[ARM] pxa/colibri: provide MAC address from ATAG_SERIAL

2009-04-04 10:26:34 +08:00

colibri-pxa270.c

[ARM] pxa: rename colibri.c to colibri-pxa270.c

2009-03-23 09:57:54 +08:00

colibri-pxa300.c

[ARM] pxa/colibri: get rid of set_irq_type()

2009-04-04 10:26:34 +08:00

colibri-pxa320.c

[ARM] pxa/colibri: get rid of set_irq_type()

2009-04-04 10:26:34 +08:00

corgi_lcd.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

corgi_pm.c

[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one

2009-06-11 22:20:42 +08:00

corgi_ssp.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

corgi.c

[ARM] pxa: register wm8731 explicitly for corgi and poodle

2009-06-16 21:03:36 +08:00

cpufreq-pxa2xx.c

[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx

2009-06-05 10:33:07 +08:00

cpufreq-pxa3xx.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

csb701.c

[ARM] pxa/csb701: do not register devices on non-csb726 boads

2009-04-04 10:26:35 +08:00

csb726.c

[ARM] pxa/csb726: register ac97 controller

2009-06-05 10:41:23 +08:00

devices.c

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2009-06-14 13:42:43 -07:00

devices.h

[ARM] pxa: add resources for incoming rtc-pxa driver

2008-12-02 14:43:47 +08:00

e330.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

e350.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

e400.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

e740.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

e750.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

e800.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

em-x270.c

[ARM] pxa/em-x270: fix compile failure when CONFIG_APM_EMULATION=n

2009-07-23 10:43:40 +08:00

eseries.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

eseries.h

[ARM] pxa: Add multi-io support for e-series

2008-12-15 03:29:34 +00:00

ezx.c

[ARM] pxa/ezx: setup gpio-keys for EzX phones

2009-06-05 10:50:22 +08:00

generic.c

[ARM] pxa: move GPIO register definitions into <mach/gpio.h>

2009-03-09 21:22:37 +08:00

generic.h

[ARM] pxa: add missing declaration of pxa26x_init_irq()

2009-04-13 12:10:36 +08:00

gumstix.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

h5000.c

Merge branch 'origin' into devel

2009-03-28 20:29:51 +00:00

himalaya.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

hx4700.c

[ARM] pxa/hx4700: add Maxim 1587A voltage regulator

2009-06-16 21:03:35 +08:00

idp.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

imote2.c

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2009-06-14 13:42:43 -07:00

irq.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

Kconfig

[ARM] pxa/treo680: initial support

2009-06-16 21:03:34 +08:00

leds-idp.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

leds-lubbock.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

leds-mainstone.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

leds.c

[ARM] 5251/1: remove old LED support for Trizeps4 SOM

2008-10-01 22:34:34 +01:00

leds.h

fix file specification in comments

2006-10-03 23:01:26 +02:00

littleton.c

[ARM] pxa/littleton: add support for the Micro-SD slot (MMC1)

2009-06-05 16:49:26 +08:00

lpd270.c

[ARM] pxa: move GPIO register definitions into <mach/gpio.h>

2009-03-09 21:22:37 +08:00

lubbock.c

[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c

2009-03-09 21:22:40 +08:00

magician.c

[ARM] pxa/magician: use ARRAY_AND_SIZE for platform_add_devices

2009-06-05 10:39:39 +08:00

mainstone.c

[ARM] pxa: move mach/i2c.h to plat/i2c.h

2009-06-05 10:32:01 +08:00

Makefile

[ARM] pxa/treo680: initial support

2009-06-16 21:03:34 +08:00

Makefile.boot

Linux-2.6.12-rc2

2005-04-16 15:20:36 -07:00

mfp-pxa2xx.c

[ARM] pxa: enable GPIO receivers after configuring pins

2009-05-18 21:52:09 +08:00

mfp-pxa3xx.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

mioa701_bootresume.S

[ARM] pxa/MioA701: fix memory corruption.

2008-11-22 20:57:21 +08:00

mioa701.c

[ARM] pxa/mioa701: add V3 gain configuration for Maxim 1586 voltage regulator

2009-06-16 21:03:36 +08:00

mp900.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

palmld.c

[ARM] pxa: add STUART MFP config for PalmTX,T5,LD

2009-07-18 10:01:30 +08:00

palmt5.c

[ARM] pxa: add STUART MFP config for PalmTX,T5,LD

2009-07-18 10:01:30 +08:00

palmte2.c

[ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2

2009-06-05 10:41:54 +08:00

palmtx.c

[ARM] pxa: add STUART MFP config for PalmTX,T5,LD

2009-07-18 10:01:30 +08:00

palmz72.c

[ARM] pxa/palm: various fixes for PalmZ72 (mostly audio asoc and usb)

2009-06-16 16:55:24 +08:00

pcm027.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

pcm990-baseboard.c

V4L/DVB (11607): soc-camera: add a free_bus method to struct soc_camera_link

2009-06-16 18:20:43 -03:00

pm.c

[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines

2009-06-11 23:25:09 +08:00

poodle.c

[ARM] pxa: register wm8731 explicitly for corgi and poodle

2009-06-16 21:03:36 +08:00

pxa2xx.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

pxa3xx.c

[ARM] pxa: correct I2CPWR clock for pxa3xx

2009-07-03 14:13:49 +08:00

pxa25x.c

[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c

2009-03-09 21:22:37 +08:00

pxa27x.c

[ARM] pxa: add ability to set suspend mode

2009-06-05 10:32:48 +08:00

pxa300.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

pxa320.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

pxa930.c

[ARM] pxa: support mfp of pxa935

2009-09-10 18:49:24 +08:00

reset.c

[ARM] pxa: allow gpio_reset drive high during normal work

2009-05-18 21:52:09 +08:00

saar.c

[ARM] pxa: move mach/i2c.h to plat/i2c.h

2009-06-05 10:32:01 +08:00

sharpsl_pm.c

[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines

2009-06-11 23:25:09 +08:00

sharpsl.h

[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one

2009-06-11 22:20:42 +08:00

sleep.S

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

smemc.c

[ARM] pxa: avoid polluting the kernel's namespace

2008-11-28 16:04:54 +00:00

spitz_pm.c

[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one

2009-06-11 22:20:42 +08:00

spitz.c

[ARM] pxa/spitz: drop unused header files from spitz.c

2009-06-05 10:49:45 +08:00

ssp.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

standby.S

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

stargate2.c

[ARM] pxa: Stargate 2 board support

2009-06-05 10:46:17 +08:00

tavorevb.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

time.c

clocksource: pass clocksource to read() callback

2009-04-21 13:41:47 -07:00

tosa-bt.c

rfkill: rewrite

2009-06-03 14:06:13 -04:00

tosa.c

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

2009-06-15 03:02:23 -07:00

treo680.c

ARM: 5623/1: Treo680: ir shutdown typo fix

2009-07-27 14:23:57 +01:00

trizeps4.c

[ARM] pxa: move mach/i2c.h to plat/i2c.h

2009-06-05 10:32:01 +08:00

viper.c

[ARM] pxa: move mach/i2c.h to plat/i2c.h

2009-06-05 10:32:01 +08:00

zylonite_pxa300.c

[ARM] pxa: fix gpio issue in zylonite

2009-07-18 10:00:08 +08:00

zylonite_pxa320.c

[ARM] pxa: fix gpio issue in zylonite

2009-07-18 10:00:08 +08:00

zylonite.c

[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>

2008-12-02 14:42:37 +08:00