Shawn Lin 07cbeea541 mmc: sdio_cis: fix unknown tuple for CISTPL_SDIO_STD ... CISTPL_SDIO_STD(0x91) is a known tuple, but sdio_cis don't define it, so we get the warning below while probing several sdio wifi cards. Refer to SDIO spec, it's not needed to parse the tuple, so this patch make it a known one. [ 4.098980] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.099033] mmc2: new ultra high speed SDR104 SDIO card at address 0001 Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2016-01-20 12:39:24 +01:00
..
bus.c	mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously	2015-12-22 11:32:16 +01:00
bus.h	mmc: rename dev_to_mmc_card() to mmc_dev_to_card()	2010-10-23 21:11:12 +08:00
core.c	mmc: core: Optimize boot time by detecting cards simultaneously	2015-12-28 10:08:09 +01:00
core.h	mmc: fix mmc_{un,}register_pm_notifier prototypes	2015-12-22 11:32:09 +01:00
debugfs.c	mmc: debugfs: correct wrong voltage value	2016-01-19 10:14:22 +01:00
host.c	mmc: core: Refactor code to register the MMC PM notifier	2015-12-22 11:32:04 +01:00
host.h	mmc: host: Add facility to support re-tuning	2015-06-01 09:06:53 +02:00
Kconfig	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
Makefile	mmc: pwrseq: add driver for emmc hardware reset	2015-02-04 09:45:09 +01:00
mmc_ops.c	mmc: core: fix __mmc_switch timeout caused by preempt	2015-12-22 11:32:18 +01:00
mmc_ops.h	mmc: core: Convert __mmc_switch() into an internal core function	2015-10-26 15:59:54 +01:00
mmc.c	mmc: It is not an error for the card to be removed while suspended	2015-12-28 12:51:38 +01:00
pwrseq_emmc.c	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
pwrseq_simple.c	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
pwrseq.c	mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()	2015-04-17 10:17:19 +02:00
pwrseq.h	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
quirks.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sd_ops.c	mmc: sd: warn if card stays busy during init	2014-07-09 11:26:07 +02:00
sd_ops.h	mmc: add erase, secure erase, trim and secure trim operations	2010-08-12 08:43:30 -07:00
sd.c	mmc: core: Enable tuning according to the actual timing	2016-01-14 10:59:09 +01:00
sd.h	mmc: drop the speed mode of card's state	2014-05-12 18:05:53 -04:00
sdio_bus.c	mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously	2015-12-22 11:32:16 +01:00
sdio_bus.h	mmc: basic SDIO device model	2007-09-23 19:45:31 +02:00
sdio_cis.c	mmc: sdio_cis: fix unknown tuple for CISTPL_SDIO_STD	2016-01-20 12:39:24 +01:00
sdio_cis.h	sdio: split up common and function CIS parsing	2007-09-23 20:44:22 +02:00
sdio_io.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_irq.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sdio_ops.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_ops.h	mmc: Add mmc_is_io_op helper function	2015-10-26 16:00:01 +01:00
sdio.c	mmc: core: Enable tuning according to the actual timing	2016-01-14 10:59:09 +01:00
slot-gpio.c	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
slot-gpio.h	mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core	2015-01-19 09:56:17 +01:00