linux/net/mac80211
Felix Fietkau 0c5b93290b mac80211: update sta->last_rx on acked tx frames
When clients are idle for too long, hostapd sends nullfunc frames for
probing. When those are acked by the client, the idle time needs to be
updated.

To make this work (and to avoid unnecessary probing), update sta->last_rx
whenever an ACK was received for a tx packet. Only do this if the flag
IEEE80211_HW_REPORTS_TX_ACK_STATUS is set.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-30 12:34:09 +02:00
..
aes_ccm.c wireless: move crypto constants to ieee80211.h 2013-05-16 22:39:41 +02:00
aes_ccm.h
aes_cmac.c
aes_cmac.h
agg-rx.c
agg-tx.c
cfg.c mac80211: use sta_info_get_bss() for nl80211 tx and client probing 2013-09-30 11:30:57 +02:00
cfg.h
chan.c mac80211: add channel switch command and beacon callbacks 2013-08-01 18:30:33 +02:00
debug.h mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_key.c mac80211: move sdata debugfs dir to vif 2013-03-18 20:10:04 +01:00
debugfs_key.h
debugfs_netdev.c cfg80211/mac80211: use cfg80211 wdev mutex in mac80211 2013-05-25 00:02:16 +02:00
debugfs_netdev.h
debugfs_sta.c mac80211: add debugfs for driver-buffered TID bitmap 2013-08-01 15:08:24 +02:00
debugfs_sta.h
debugfs.c mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE 2013-02-11 18:45:01 +01:00
debugfs.h
driver-ops.h mac80211: add channel switch command and beacon callbacks 2013-08-01 18:30:33 +02:00
event.c
ht.c mac80211: enable HT overrides for ibss 2013-07-16 09:57:57 +03:00
ibss.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2013-08-28 10:36:09 -04:00
ieee80211_i.h wireless: make TU conversion macros available 2013-08-06 11:00:59 +02:00
iface.c mac80211: fix change_interface queue assignments 2013-08-26 09:52:58 +02:00
Kconfig Driver core patches for 3.9-rc1 2013-02-21 12:05:51 -08:00
key.c mac80211: add APIs to allow keeping connections after WoWLAN 2013-08-16 12:58:43 +02:00
key.h wireless: move crypto constants to ieee80211.h 2013-05-16 22:39:41 +02:00
led.c mac80211: use oneshot blink API for LED triggers 2013-08-01 10:48:49 +02:00
led.h mac80211: use oneshot blink API for LED triggers 2013-08-01 10:48:49 +02:00
main.c mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into drivers 2013-08-23 12:02:26 +02:00
Makefile mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
mesh_hwmp.c mac80211: parse VHT channel switch IEs 2013-04-16 15:29:45 +02:00
mesh_pathtbl.c mac80211: return new mpath from mesh_path_add() 2013-04-08 09:16:59 +02:00
mesh_plink.c mac80211: select and adjust bitrates according to channel mode 2013-07-16 09:58:06 +03:00
mesh_ps.c mac80211: prevent the buffering or frame transmission to non-assoc mesh STA 2013-07-22 15:32:47 +02:00
mesh_sync.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh.c mac80211: only respond to probe request with mesh ID 2013-08-23 15:25:06 +02:00
mesh.h mac80211: update mesh beacon on workqueue 2013-06-18 15:57:27 +02:00
michael.c
michael.h
mlme.c Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2013-08-28 13:49:20 -04:00
offchannel.c Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2013-04-10 14:09:54 -04:00
pm.c mac80211: fix monitor interface suspend crash regression 2013-07-23 14:02:08 +02:00
rate.c mac80211: allow lowest basic rate for unicast management for mesh 2013-08-09 15:11:27 +02:00
rate.h mac80211/rc80211: add chandef to rate initialization 2013-07-16 09:58:02 +03:00
rc80211_minstrel_debugfs.c mac80211: cosmetics for minstrel_debugfs 2013-04-17 17:08:23 +02:00
rc80211_minstrel_ht_debugfs.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel_ht.c Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2013-08-28 13:51:40 -04:00
rc80211_minstrel_ht.h mac80211/minstrel_ht: use the new rate control API 2013-04-22 16:16:41 +02:00
rc80211_minstrel.c Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2013-08-01 15:26:52 -04:00
rc80211_minstrel.h mac80211/minstrel: use the new rate control API 2013-04-22 16:16:41 +02:00
rc80211_pid_algo.c mac80211/rc80211: add chandef to rate initialization 2013-07-16 09:58:02 +03:00
rc80211_pid_debugfs.c
rc80211_pid.h
rx.c mac80211: drop spoofed packets in ad-hoc mode 2013-09-26 19:56:06 +02:00
scan.c mac80211: allow scanning for 5/10 MHz channels in IBSS 2013-07-16 09:58:09 +03:00
spectmgmt.c
sta_info.c mac80211: initialize power mode for mesh STAs 2013-06-24 15:59:20 +02:00
sta_info.h mac80211: Ensure tid_start_tx is protected by sta->lock 2013-06-13 10:27:07 +02:00
status.c mac80211: update sta->last_rx on acked tx frames 2013-09-30 12:34:09 +02:00
tkip.c mac80211: use just spin_lock() in ieee80211_get_tkip_p2k() 2013-05-16 22:38:06 +02:00
tkip.h
trace.c
trace.h mac80211: add channel switch command and beacon callbacks 2013-08-01 18:30:33 +02:00
tx.c mac80211: use sta_info_get_bss() for nl80211 tx and client probing 2013-09-30 11:30:57 +02:00
util.c mac80211: fix the setting of extended supported rate IE 2013-09-26 19:56:59 +02:00
vht.c mac80211: Fix VHT bandwidth change event 2013-06-13 11:58:47 +02:00
wep.c wireless: move crypto constants to ieee80211.h 2013-05-16 22:39:41 +02:00
wep.h
wme.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
wme.h
wpa.c wireless: move crypto constants to ieee80211.h 2013-05-16 22:39:41 +02:00
wpa.h