mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
50d7d5bf31
We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
---|---|---|
.. | ||
at25.c | ||
atmel_spi.c | ||
atmel_spi.h | ||
au1550_spi.c | ||
Kconfig | ||
Makefile | ||
mpc52xx_psc_spi.c | ||
omap2_mcspi.c | ||
omap_uwire.c | ||
orion_spi.c | ||
pxa2xx_spi.c | ||
spi_bfin5xx.c | ||
spi_bitbang.c | ||
spi_butterfly.c | ||
spi_imx.c | ||
spi_lm70llp.c | ||
spi_mpc83xx.c | ||
spi_s3c24xx_gpio.c | ||
spi_s3c24xx.c | ||
spi_sh_sci.c | ||
spi_txx9.c | ||
spi.c | ||
spidev.c | ||
tle62x0.c | ||
xilinx_spi.c |