linux/arch/mips/txx9/rbtx4939/setup.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

556 lines
14 KiB
C

/*
* Toshiba RBTX4939 setup routines.
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
* Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/rbtx4939.h>
static void rbtx4939_machine_restart(char *command)
{
local_irq_disable();
writeb(1, rbtx4939_reseten_addr);
writeb(1, rbtx4939_softreset_addr);
while (1)
;
}
static void __init rbtx4939_time_init(void)
{
tx4939_time_init(0);
}
#if defined(__BIG_ENDIAN) && \
(defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE))
#define HAVE_RBTX4939_IOSWAB
#define IS_CE1_ADDR(addr) \
((((unsigned long)(addr) - IO_BASE) & 0xfff00000) == TXX9_CE(1))
static u16 rbtx4939_ioswabw(volatile u16 *a, u16 x)
{
return IS_CE1_ADDR(a) ? x : le16_to_cpu(x);
}
static u16 rbtx4939_mem_ioswabw(volatile u16 *a, u16 x)
{
return !IS_CE1_ADDR(a) ? x : le16_to_cpu(x);
}
#endif /* __BIG_ENDIAN && CONFIG_SMC91X */
static void __init rbtx4939_pci_setup(void)
{
#ifdef CONFIG_PCI
int extarb = !(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB);
struct pci_controller *c = &txx9_primary_pcic;
register_pci_controller(c);
tx4939_report_pciclk();
tx4927_pcic_setup(tx4939_pcicptr, c, extarb);
if (!(__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_ATA1MODE) &&
(__raw_readq(&tx4939_ccfgptr->pcfg) &
(TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE))) {
tx4939_report_pci1clk();
/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
register_pci_controller(c);
tx4927_pcic_setup(tx4939_pcic1ptr, c, 0);
}
tx4939_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
static unsigned long long default_ebccr[] __initdata = {
0x01c0000000007608ULL, /* 64M ROM */
0x017f000000007049ULL, /* 1M IOC */
0x0180000000408608ULL, /* ISA */
0,
};
static void __init rbtx4939_ebusc_setup(void)
{
int i;
unsigned int sp;
/* use user-configured speed */
sp = TX4939_EBUSC_CR(0) & 0x30;
default_ebccr[0] |= sp;
default_ebccr[1] |= sp;
default_ebccr[2] |= sp;
/* initialise by myself */
for (i = 0; i < ARRAY_SIZE(default_ebccr); i++) {
if (default_ebccr[i])
____raw_writeq(default_ebccr[i],
&tx4939_ebuscptr->cr[i]);
else
____raw_writeq(____raw_readq(&tx4939_ebuscptr->cr[i])
& ~8,
&tx4939_ebuscptr->cr[i]);
}
}
static void __init rbtx4939_update_ioc_pen(void)
{
__u64 pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
__u64 ccfg = ____raw_readq(&tx4939_ccfgptr->ccfg);
__u8 pe1 = readb(rbtx4939_pe1_addr);
__u8 pe2 = readb(rbtx4939_pe2_addr);
__u8 pe3 = readb(rbtx4939_pe3_addr);
if (pcfg & TX4939_PCFG_ATA0MODE)
pe1 |= RBTX4939_PE1_ATA(0);
else
pe1 &= ~RBTX4939_PE1_ATA(0);
if (pcfg & TX4939_PCFG_ATA1MODE) {
pe1 |= RBTX4939_PE1_ATA(1);
pe1 &= ~(RBTX4939_PE1_RMII(0) | RBTX4939_PE1_RMII(1));
} else {
pe1 &= ~RBTX4939_PE1_ATA(1);
if (pcfg & TX4939_PCFG_ET0MODE)
pe1 |= RBTX4939_PE1_RMII(0);
else
pe1 &= ~RBTX4939_PE1_RMII(0);
if (pcfg & TX4939_PCFG_ET1MODE)
pe1 |= RBTX4939_PE1_RMII(1);
else
pe1 &= ~RBTX4939_PE1_RMII(1);
}
if (ccfg & TX4939_CCFG_PTSEL)
pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P |
RBTX4939_PE3_VP_S);
else {
__u64 vmode = pcfg &
(TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE);
if (vmode == 0)
pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P |
RBTX4939_PE3_VP_S);
else if (vmode == TX4939_PCFG_VPSMODE) {
pe3 |= RBTX4939_PE3_VP_P;
pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_S);
} else if (vmode == TX4939_PCFG_VSSMODE) {
pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_S;
pe3 &= ~RBTX4939_PE3_VP_P;
} else {
pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_P;
pe3 &= ~RBTX4939_PE3_VP_S;
}
}
if (pcfg & TX4939_PCFG_SPIMODE) {
if (pcfg & TX4939_PCFG_SIO2MODE_GPIO)
pe2 &= ~(RBTX4939_PE2_SIO2 | RBTX4939_PE2_SIO0);
else {
if (pcfg & TX4939_PCFG_SIO2MODE_SIO2) {
pe2 |= RBTX4939_PE2_SIO2;
pe2 &= ~RBTX4939_PE2_SIO0;
} else {
pe2 |= RBTX4939_PE2_SIO0;
pe2 &= ~RBTX4939_PE2_SIO2;
}
}
if (pcfg & TX4939_PCFG_SIO3MODE)
pe2 |= RBTX4939_PE2_SIO3;
else
pe2 &= ~RBTX4939_PE2_SIO3;
pe2 &= ~RBTX4939_PE2_SPI;
} else {
pe2 |= RBTX4939_PE2_SPI;
pe2 &= ~(RBTX4939_PE2_SIO3 | RBTX4939_PE2_SIO2 |
RBTX4939_PE2_SIO0);
}
if ((pcfg & TX4939_PCFG_I2SMODE_MASK) == TX4939_PCFG_I2SMODE_GPIO)
pe2 |= RBTX4939_PE2_GPIO;
else
pe2 &= ~RBTX4939_PE2_GPIO;
writeb(pe1, rbtx4939_pe1_addr);
writeb(pe2, rbtx4939_pe2_addr);
writeb(pe3, rbtx4939_pe3_addr);
}
#define RBTX4939_MAX_7SEGLEDS 8
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
static u8 led_val[RBTX4939_MAX_7SEGLEDS];
struct rbtx4939_led_data {
struct led_classdev cdev;
char name[32];
unsigned int num;
};
/* Use "dot" in 7seg LEDs */
static void rbtx4939_led_brightness_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct rbtx4939_led_data *led_dat =
container_of(led_cdev, struct rbtx4939_led_data, cdev);
unsigned int num = led_dat->num;
unsigned long flags;
local_irq_save(flags);
led_val[num] = (led_val[num] & 0x7f) | (value ? 0x80 : 0);
writeb(led_val[num], rbtx4939_7seg_addr(num / 4, num % 4));
local_irq_restore(flags);
}
static int __init rbtx4939_led_probe(struct platform_device *pdev)
{
struct rbtx4939_led_data *leds_data;
int i;
static char *default_triggers[] __initdata = {
"heartbeat",
"ide-disk",
"nand-disk",
};
leds_data = kzalloc(sizeof(*leds_data) * RBTX4939_MAX_7SEGLEDS,
GFP_KERNEL);
if (!leds_data)
return -ENOMEM;
for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) {
int rc;
struct rbtx4939_led_data *led_dat = &leds_data[i];
led_dat->num = i;
led_dat->cdev.brightness_set = rbtx4939_led_brightness_set;
sprintf(led_dat->name, "rbtx4939:amber:%u", i);
led_dat->cdev.name = led_dat->name;
if (i < ARRAY_SIZE(default_triggers))
led_dat->cdev.default_trigger = default_triggers[i];
rc = led_classdev_register(&pdev->dev, &led_dat->cdev);
if (rc < 0)
return rc;
led_dat->cdev.brightness_set(&led_dat->cdev, 0);
}
return 0;
}
static struct platform_driver rbtx4939_led_driver = {
.driver = {
.name = "rbtx4939-led",
.owner = THIS_MODULE,
},
};
static void __init rbtx4939_led_setup(void)
{
platform_device_register_simple("rbtx4939-led", -1, NULL, 0);
platform_driver_probe(&rbtx4939_led_driver, rbtx4939_led_probe);
}
#else
static inline void rbtx4939_led_setup(void)
{
}
#endif
static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
{
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
unsigned long flags;
local_irq_save(flags);
/* bit7: reserved for LED class */
led_val[pos] = (led_val[pos] & 0x80) | (val & 0x7f);
val = led_val[pos];
local_irq_restore(flags);
#endif
writeb(val, rbtx4939_7seg_addr(pos / 4, pos % 4));
}
static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
{
/* convert from map_to_seg7() notation */
val = (val & 0x88) |
((val & 0x40) >> 6) |
((val & 0x20) >> 4) |
((val & 0x10) >> 2) |
((val & 0x04) << 2) |
((val & 0x02) << 4) |
((val & 0x01) << 6);
__rbtx4939_7segled_putc(pos, val);
}
#if defined(CONFIG_MTD_RBTX4939) || defined(CONFIG_MTD_RBTX4939_MODULE)
/* special mapping for boot rom */
static unsigned long rbtx4939_flash_fixup_ofs(unsigned long ofs)
{
u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;
unsigned char shift;
if (bdipsw & 8) {
/* BOOT Mode: USER ROM1 / USER ROM2 */
shift = bdipsw & 3;
/* rotate A[23:22] */
return (ofs & ~0xc00000) | ((((ofs >> 22) + shift) & 3) << 22);
}
#ifdef __BIG_ENDIAN
if (bdipsw == 0)
/* BOOT Mode: Monitor ROM */
ofs ^= 0x400000; /* swap A[22] */
#endif
return ofs;
}
static map_word rbtx4939_flash_read16(struct map_info *map, unsigned long ofs)
{
map_word r;
ofs = rbtx4939_flash_fixup_ofs(ofs);
r.x[0] = __raw_readw(map->virt + ofs);
return r;
}
static void rbtx4939_flash_write16(struct map_info *map, const map_word datum,
unsigned long ofs)
{
ofs = rbtx4939_flash_fixup_ofs(ofs);
__raw_writew(datum.x[0], map->virt + ofs);
mb(); /* see inline_map_write() in mtd/map.h */
}
static void rbtx4939_flash_copy_from(struct map_info *map, void *to,
unsigned long from, ssize_t len)
{
u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;
unsigned char shift;
ssize_t curlen;
from += (unsigned long)map->virt;
if (bdipsw & 8) {
/* BOOT Mode: USER ROM1 / USER ROM2 */
shift = bdipsw & 3;
while (len) {
curlen = min_t(unsigned long, len,
0x400000 - (from & (0x400000 - 1)));
memcpy(to,
(void *)((from & ~0xc00000) |
((((from >> 22) + shift) & 3) << 22)),
curlen);
len -= curlen;
from += curlen;
to += curlen;
}
return;
}
#ifdef __BIG_ENDIAN
if (bdipsw == 0) {
/* BOOT Mode: Monitor ROM */
while (len) {
curlen = min_t(unsigned long, len,
0x400000 - (from & (0x400000 - 1)));
memcpy(to, (void *)(from ^ 0x400000), curlen);
len -= curlen;
from += curlen;
to += curlen;
}
return;
}
#endif
memcpy(to, (void *)from, len);
}
static void rbtx4939_flash_map_init(struct map_info *map)
{
map->read = rbtx4939_flash_read16;
map->write = rbtx4939_flash_write16;
map->copy_from = rbtx4939_flash_copy_from;
}
static void __init rbtx4939_mtd_init(void)
{
static struct {
struct platform_device dev;
struct resource res;
struct rbtx4939_flash_data data;
} pdevs[4];
int i;
static char names[4][8];
static struct mtd_partition parts[4];
struct rbtx4939_flash_data *boot_pdata = &pdevs[0].data;
u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;
if (bdipsw & 8) {
/* BOOT Mode: USER ROM1 / USER ROM2 */
boot_pdata->nr_parts = 4;
for (i = 0; i < boot_pdata->nr_parts; i++) {
sprintf(names[i], "img%d", 4 - i);
parts[i].name = names[i];
parts[i].size = 0x400000;
parts[i].offset = MTDPART_OFS_NXTBLK;
}
} else if (bdipsw == 0) {
/* BOOT Mode: Monitor ROM */
boot_pdata->nr_parts = 2;
strcpy(names[0], "big");
strcpy(names[1], "little");
for (i = 0; i < boot_pdata->nr_parts; i++) {
parts[i].name = names[i];
parts[i].size = 0x400000;
parts[i].offset = MTDPART_OFS_NXTBLK;
}
} else {
/* BOOT Mode: ROM Emulator */
boot_pdata->nr_parts = 2;
parts[0].name = "boot";
parts[0].offset = 0xc00000;
parts[0].size = 0x400000;
parts[1].name = "user";
parts[1].offset = 0;
parts[1].size = 0xc00000;
}
boot_pdata->parts = parts;
boot_pdata->map_init = rbtx4939_flash_map_init;
for (i = 0; i < ARRAY_SIZE(pdevs); i++) {
struct resource *r = &pdevs[i].res;
struct platform_device *dev = &pdevs[i].dev;
r->start = 0x1f000000 - i * 0x1000000;
r->end = r->start + 0x1000000 - 1;
r->flags = IORESOURCE_MEM;
pdevs[i].data.width = 2;
dev->num_resources = 1;
dev->resource = r;
dev->id = i;
dev->name = "rbtx4939-flash";
dev->dev.platform_data = &pdevs[i].data;
platform_device_register(dev);
}
}
#else
static void __init rbtx4939_mtd_init(void)
{
}
#endif
static void __init rbtx4939_arch_init(void)
{
rbtx4939_pci_setup();
}
static void __init rbtx4939_device_init(void)
{
unsigned long smc_addr = RBTX4939_ETHER_ADDR - IO_BASE;
struct resource smc_res[] = {
{
.start = smc_addr,
.end = smc_addr + 0x10 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = RBTX4939_IRQ_ETHER,
/* override default irq flag defined in smc91x.h */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
struct smc91x_platdata smc_pdata = {
.flags = SMC91X_USE_16BIT,
};
struct platform_device *pdev;
#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
int i, j;
unsigned char ethaddr[2][6];
u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;
for (i = 0; i < 2; i++) {
unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10);
if (bdipsw == 0)
memcpy(ethaddr[i], (void *)area, 6);
else {
u16 buf[3];
if (bdipsw & 8)
area -= 0x03000000;
else
area -= 0x01000000;
for (j = 0; j < 3; j++)
buf[j] = le16_to_cpup((u16 *)(area + j * 2));
memcpy(ethaddr[i], buf, 6);
}
}
tx4939_ethaddr_init(ethaddr[0], ethaddr[1]);
#endif
pdev = platform_device_alloc("smc91x", -1);
if (!pdev ||
platform_device_add_resources(pdev, smc_res, ARRAY_SIZE(smc_res)) ||
platform_device_add_data(pdev, &smc_pdata, sizeof(smc_pdata)) ||
platform_device_add(pdev))
platform_device_put(pdev);
rbtx4939_mtd_init();
/* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */
tx4939_ndfmc_init(10, 35,
(1 << 1) | (1 << 2),
(1 << 2)); /* ch1:8bit, ch2:16bit */
rbtx4939_led_setup();
tx4939_wdt_init();
tx4939_ata_init();
tx4939_rtc_init();
tx4939_dmac_init(0, 2);
tx4939_aclc_init();
platform_device_register_simple("txx9aclc-generic", -1, NULL, 0);
tx4939_sramc_init();
tx4939_rng_init();
}
static void __init rbtx4939_setup(void)
{
int i;
rbtx4939_ebusc_setup();
/* always enable ATA0 */
txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
if (txx9_master_clock == 0)
txx9_master_clock = 20000000;
tx4939_setup();
rbtx4939_update_ioc_pen();
#ifdef HAVE_RBTX4939_IOSWAB
ioswabw = rbtx4939_ioswabw;
__mem_ioswabw = rbtx4939_mem_ioswabw;
#endif
_machine_restart = rbtx4939_machine_restart;
txx9_7segled_init(RBTX4939_MAX_7SEGLEDS, rbtx4939_7segled_putc);
for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++)
txx9_7segled_putc(i, '-');
pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr),
readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr));
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(RBTX4939_ETHER_BASE);
#endif
tx4939_sio_init(TX4939_SCLK0(txx9_master_clock), 0);
}
struct txx9_board_vec rbtx4939_vec __initdata = {
.system = "Toshiba RBTX4939",
.prom_init = rbtx4939_prom_init,
.mem_setup = rbtx4939_setup,
.irq_setup = rbtx4939_irq_setup,
.time_init = rbtx4939_time_init,
.device_init = rbtx4939_device_init,
.arch_init = rbtx4939_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = tx4939_pci_map_irq,
#endif
};