Shawn Guo 8d7cf8370d gpio/mxs: Change gpio-mxs into an upstanding gpio driver ...

The patch makes necessary changes on gpio-mxs as below to turn it
into an upstanding gpio driver.

 * Clean up the gpio port definition stuff

 * Use readl/writel to replace mach-specific accessors
   __raw_readl/__raw_writel

 * Change mxs_gpio_init into mxs_gpio_probe function

And it then migrates mach-mxs to the updated driver by adding
corresponding platform devices.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-06-06 10:01:19 -06:00

..

devices

gpio/mxs: Change gpio-mxs into an upstanding gpio driver

2011-06-06 10:01:19 -06:00

include/mach

gpio/mxs: Change gpio-mxs into an upstanding gpio driver

2011-06-06 10:01:19 -06:00

clock-mx23.c

mx23: register clocks for mmc

2011-05-19 13:11:35 +02:00

clock-mx28.c

ARM: mxs/clock-mx28: fix up name##_set_rate

2011-04-12 09:48:02 +02:00

clock.c

ARM i.MX23/28: remove secondary field from struct clk. It's unused

2011-01-24 09:01:48 +01:00

devices-mx23.h

ARM: mxs: dynamically allocate mmc device

2011-03-25 08:36:55 +01:00

devices-mx28.h

ARM: mxs: fix naming of struct holding info for mxs-i2c devices

2011-05-19 13:11:23 +02:00

devices.c

gpio/mxs: Change gpio-mxs into an upstanding gpio driver

2011-06-06 10:01:19 -06:00

icoll.c

arm: Fold irq_set_chip/irq_set_handler

2011-03-29 14:47:58 +02:00

iomux.c

ARM: mxs: Add iomux support

2010-12-20 17:29:58 +01:00

Kconfig

Merge branch 'devel-stable' into for-linus

2011-05-23 19:28:04 +01:00

mach-mx23evk.c

ARM: mxs/mach-mx2[38]evk: Set the initial value on gpio_request_one

2011-05-19 13:11:10 +02:00

mach-mx28evk.c

gpio/mxs: Move Freescale mxs gpio driver to drivers/gpio

2011-06-06 09:37:58 -06:00

mach-stmp378x_devb.c

ARM: mach-mxs: add stmp378x-devb

2011-05-02 19:08:54 +01:00

mach-tx28.c

arm: mxs: tx28: add i2c bus and connected RTC

2011-03-07 19:29:18 +01:00

Makefile

gpio/mxs: Move Freescale mxs gpio driver to drivers/gpio

2011-06-06 09:37:58 -06:00

Makefile.boot

ARM: mxs: Add build configuration for mxs

2010-12-20 17:30:44 +01:00

mm-mx23.c

gpio/mxs: Change gpio-mxs into an upstanding gpio driver

2011-06-06 10:01:19 -06:00

mm-mx28.c

gpio/mxs: Change gpio-mxs into an upstanding gpio driver

2011-06-06 10:01:19 -06:00

module-tx28.c

ARM: mxs: configure and register the second FEC device on TX28/STK5-V4

2011-03-23 15:08:14 +01:00

module-tx28.h

ARM: mxs: configure and register the second FEC device on TX28/STK5-V4

2011-03-23 15:08:14 +01:00

ocotp.c

ARM: mxs: add ocotp read function

2011-01-21 11:36:49 +01:00

pm.c

ARM: mxs: add initial pm support

2011-01-26 08:30:49 +01:00

regs-clkctrl-mx23.h

ARM i.MX23: remove reserved register defines

2011-01-28 08:28:52 +01:00

regs-clkctrl-mx28.h

ARM i.MX28: remove reserved register defines

2011-01-28 08:28:57 +01:00

system.c

ARM: mxs: Add missing EXPORT_SYMBOL for mxs_reset_block

2011-03-07 19:29:06 +01:00

timer.c

clocksource: convert MXS timrotv2 to 32-bit down counting clocksource

2011-05-23 18:04:52 +01:00