mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 02:48:21 +00:00
d96a980441
All current Simtec designs source the DCLK outputs from the UPLL. This means the DCLK's parent must be set to UPLL so that anything enabling and disabling an UPLL sourced clock does not shutdown the DCLK due to missing open counts. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
464 lines
10 KiB
C
464 lines
10 KiB
C
/* linux/arch/arm/mach-s3c2440/mach-anubis.c
|
|
*
|
|
* Copyright (c) 2003-2005 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/sm501.h>
|
|
#include <linux/sm501-regs.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/arch/anubis-map.h>
|
|
#include <asm/arch/anubis-irq.h>
|
|
#include <asm/arch/anubis-cpld.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/plat-s3c/regs-serial.h>
|
|
#include <asm/arch/regs-gpio.h>
|
|
#include <asm/arch/regs-mem.h>
|
|
#include <asm/arch/regs-lcd.h>
|
|
#include <asm/plat-s3c/nand.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <net/ax88796.h>
|
|
|
|
#include <asm/plat-s3c24xx/clock.h>
|
|
#include <asm/plat-s3c24xx/devs.h>
|
|
#include <asm/plat-s3c24xx/cpu.h>
|
|
|
|
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
|
|
|
|
static struct map_desc anubis_iodesc[] __initdata = {
|
|
/* ISA IO areas */
|
|
|
|
{
|
|
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
|
|
.pfn = __phys_to_pfn(0x0),
|
|
.length = SZ_4M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)S3C24XX_VA_ISA_WORD,
|
|
.pfn = __phys_to_pfn(0x0),
|
|
.length = SZ_4M,
|
|
.type = MT_DEVICE,
|
|
},
|
|
|
|
/* we could possibly compress the next set down into a set of smaller tables
|
|
* pagetables, but that would mean using an L2 section, and it still means
|
|
* we cannot actually feed the same register to an LDR due to 16K spacing
|
|
*/
|
|
|
|
/* CPLD control registers */
|
|
|
|
{
|
|
.virtual = (u32)ANUBIS_VA_CTRL1,
|
|
.pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)ANUBIS_VA_IDREG,
|
|
.pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
|
|
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
|
|
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
|
|
|
|
static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
|
|
[0] = {
|
|
.name = "uclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
},
|
|
[1] = {
|
|
.name = "pclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
}
|
|
};
|
|
|
|
|
|
static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = anubis_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
|
|
},
|
|
[1] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = anubis_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
|
|
},
|
|
};
|
|
|
|
/* NAND Flash on Anubis board */
|
|
|
|
static int external_map[] = { 2 };
|
|
static int chip0_map[] = { 0 };
|
|
static int chip1_map[] = { 1 };
|
|
|
|
static struct mtd_partition anubis_default_nand_part[] = {
|
|
[0] = {
|
|
.name = "Boot Agent",
|
|
.size = SZ_16K,
|
|
.offset = 0,
|
|
},
|
|
[1] = {
|
|
.name = "/boot",
|
|
.size = SZ_4M - SZ_16K,
|
|
.offset = SZ_16K,
|
|
},
|
|
[2] = {
|
|
.name = "user1",
|
|
.offset = SZ_4M,
|
|
.size = SZ_32M - SZ_4M,
|
|
},
|
|
[3] = {
|
|
.name = "user2",
|
|
.offset = SZ_32M,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct mtd_partition anubis_default_nand_part_large[] = {
|
|
[0] = {
|
|
.name = "Boot Agent",
|
|
.size = SZ_128K,
|
|
.offset = 0,
|
|
},
|
|
[1] = {
|
|
.name = "/boot",
|
|
.size = SZ_4M - SZ_128K,
|
|
.offset = SZ_128K,
|
|
},
|
|
[2] = {
|
|
.name = "user1",
|
|
.offset = SZ_4M,
|
|
.size = SZ_32M - SZ_4M,
|
|
},
|
|
[3] = {
|
|
.name = "user2",
|
|
.offset = SZ_32M,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
/* the Anubis has 3 selectable slots for nand-flash, the two
|
|
* on-board chip areas, as well as the external slot.
|
|
*
|
|
* Note, there is no current hot-plug support for the External
|
|
* socket.
|
|
*/
|
|
|
|
static struct s3c2410_nand_set anubis_nand_sets[] = {
|
|
[1] = {
|
|
.name = "External",
|
|
.nr_chips = 1,
|
|
.nr_map = external_map,
|
|
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
|
|
.partitions = anubis_default_nand_part,
|
|
},
|
|
[0] = {
|
|
.name = "chip0",
|
|
.nr_chips = 1,
|
|
.nr_map = chip0_map,
|
|
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
|
|
.partitions = anubis_default_nand_part,
|
|
},
|
|
[2] = {
|
|
.name = "chip1",
|
|
.nr_chips = 1,
|
|
.nr_map = chip1_map,
|
|
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
|
|
.partitions = anubis_default_nand_part,
|
|
},
|
|
};
|
|
|
|
static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
slot = set->nr_map[slot] & 3;
|
|
|
|
pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
|
|
slot, set, set->nr_map);
|
|
|
|
tmp = __raw_readb(ANUBIS_VA_CTRL1);
|
|
tmp &= ~ANUBIS_CTRL1_NANDSEL;
|
|
tmp |= slot;
|
|
|
|
pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
|
|
|
|
__raw_writeb(tmp, ANUBIS_VA_CTRL1);
|
|
}
|
|
|
|
static struct s3c2410_platform_nand anubis_nand_info = {
|
|
.tacls = 25,
|
|
.twrph0 = 55,
|
|
.twrph1 = 40,
|
|
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
|
|
.sets = anubis_nand_sets,
|
|
.select_chip = anubis_nand_select,
|
|
};
|
|
|
|
/* IDE channels */
|
|
|
|
static struct resource anubis_ide0_resource[] = {
|
|
{
|
|
.start = S3C2410_CS3,
|
|
.end = S3C2410_CS3 + (8*32) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = S3C2410_CS3 + (1<<26),
|
|
.end = S3C2410_CS3 + (1<<26) + (8*32) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = IRQ_IDE0,
|
|
.end = IRQ_IDE0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device anubis_device_ide0 = {
|
|
.name = "simtec-ide",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(anubis_ide0_resource),
|
|
.resource = anubis_ide0_resource,
|
|
};
|
|
|
|
static struct resource anubis_ide1_resource[] = {
|
|
{
|
|
.start = S3C2410_CS4,
|
|
.end = S3C2410_CS4 + (8*32) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = S3C2410_CS4 + (1<<26),
|
|
.end = S3C2410_CS4 + (1<<26) + (8*32) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = IRQ_IDE0,
|
|
.end = IRQ_IDE0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
|
|
static struct platform_device anubis_device_ide1 = {
|
|
.name = "simtec-ide",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(anubis_ide1_resource),
|
|
.resource = anubis_ide1_resource,
|
|
};
|
|
|
|
/* Asix AX88796 10/100 ethernet controller */
|
|
|
|
static struct ax_plat_data anubis_asix_platdata = {
|
|
.flags = AXFLG_MAC_FROMDEV,
|
|
.wordlength = 2,
|
|
.dcr_val = 0x48,
|
|
.rcr_val = 0x40,
|
|
};
|
|
|
|
static struct resource anubis_asix_resource[] = {
|
|
[0] = {
|
|
.start = S3C2410_CS5,
|
|
.end = S3C2410_CS5 + (0x20 * 0x20) -1,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
[1] = {
|
|
.start = IRQ_ASIX,
|
|
.end = IRQ_ASIX,
|
|
.flags = IORESOURCE_IRQ
|
|
}
|
|
};
|
|
|
|
static struct platform_device anubis_device_asix = {
|
|
.name = "ax88796",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(anubis_asix_resource),
|
|
.resource = anubis_asix_resource,
|
|
.dev = {
|
|
.platform_data = &anubis_asix_platdata,
|
|
}
|
|
};
|
|
|
|
/* SM501 */
|
|
|
|
static struct resource anubis_sm501_resource[] = {
|
|
[0] = {
|
|
.start = S3C2410_CS2,
|
|
.end = S3C2410_CS2 + SZ_8M,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = S3C2410_CS2 + SZ_64M - SZ_2M,
|
|
.end = S3C2410_CS2 + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = IRQ_EINT0,
|
|
.end = IRQ_EINT0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sm501_initdata anubis_sm501_initdata = {
|
|
.gpio_high = {
|
|
.set = 0x3F000000, /* 24bit panel */
|
|
.mask = 0x0,
|
|
},
|
|
.misc_timing = {
|
|
.set = 0x010100, /* SDRAM timing */
|
|
.mask = 0x1F1F00,
|
|
},
|
|
.misc_control = {
|
|
.set = SM501_MISC_PNL_24BIT,
|
|
.mask = 0,
|
|
},
|
|
|
|
/* set the SDRAM and bus clocks */
|
|
.mclk = 72 * MHZ,
|
|
.m1xclk = 144 * MHZ,
|
|
};
|
|
|
|
static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
|
|
[0] = {
|
|
.pin_scl = 44,
|
|
.pin_sda = 45,
|
|
},
|
|
[1] = {
|
|
.pin_scl = 40,
|
|
.pin_sda = 41,
|
|
},
|
|
};
|
|
|
|
static struct sm501_platdata anubis_sm501_platdata = {
|
|
.init = &anubis_sm501_initdata,
|
|
.gpio_i2c = anubis_sm501_gpio_i2c,
|
|
.gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
|
|
};
|
|
|
|
static struct platform_device anubis_device_sm501 = {
|
|
.name = "sm501",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(anubis_sm501_resource),
|
|
.resource = anubis_sm501_resource,
|
|
.dev = {
|
|
.platform_data = &anubis_sm501_platdata,
|
|
},
|
|
};
|
|
|
|
/* Standard Anubis devices */
|
|
|
|
static struct platform_device *anubis_devices[] __initdata = {
|
|
&s3c_device_usb,
|
|
&s3c_device_wdt,
|
|
&s3c_device_adc,
|
|
&s3c_device_i2c,
|
|
&s3c_device_rtc,
|
|
&s3c_device_nand,
|
|
&anubis_device_ide0,
|
|
&anubis_device_ide1,
|
|
&anubis_device_asix,
|
|
&anubis_device_sm501,
|
|
};
|
|
|
|
static struct clk *anubis_clocks[] = {
|
|
&s3c24xx_dclk0,
|
|
&s3c24xx_dclk1,
|
|
&s3c24xx_clkout0,
|
|
&s3c24xx_clkout1,
|
|
&s3c24xx_uclk,
|
|
};
|
|
|
|
static void __init anubis_map_io(void)
|
|
{
|
|
/* initialise the clocks */
|
|
|
|
s3c24xx_dclk0.parent = &clk_upll;
|
|
s3c24xx_dclk0.rate = 12*1000*1000;
|
|
|
|
s3c24xx_dclk1.parent = &clk_upll;
|
|
s3c24xx_dclk1.rate = 24*1000*1000;
|
|
|
|
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
|
|
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
|
|
|
|
s3c24xx_uclk.parent = &s3c24xx_clkout1;
|
|
|
|
s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
|
|
|
|
s3c_device_nand.dev.platform_data = &anubis_nand_info;
|
|
|
|
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
|
|
s3c24xx_init_clocks(0);
|
|
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
|
|
|
|
/* check for the newer revision boards with large page nand */
|
|
|
|
if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
|
|
printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
|
|
__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
|
|
anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
|
|
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
|
|
} else {
|
|
/* ensure that the GPIO is setup */
|
|
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
|
|
}
|
|
}
|
|
|
|
static void __init anubis_init(void)
|
|
{
|
|
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
|
|
}
|
|
|
|
|
|
MACHINE_START(ANUBIS, "Simtec-Anubis")
|
|
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
|
|
.phys_io = S3C2410_PA_UART,
|
|
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
|
|
.boot_params = S3C2410_SDRAM_PA + 0x100,
|
|
.map_io = anubis_map_io,
|
|
.init_machine = anubis_init,
|
|
.init_irq = s3c24xx_init_irq,
|
|
.timer = &s3c24xx_timer,
|
|
MACHINE_END
|