Lothar Waßmann 8035691365 usb: musb: dsps: fix the base address for accessing the mode register ...

commit 943c13971c08 "usb: musb: dsps: implement ->set_mode()"
should have made it possible to use the driver with boards that have
the USBID pin unconnected. This doesn't actually work, since the
driver uses the wrong base address to access the mode register.
Furthermore it uses different base addresses in different places to
access the same register (phy_utmi).

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

2014-06-30 13:31:48 -05:00

..

am35x.c

usb: phy: generic: allow multiples calls to usb_phy_generic_register()

2014-04-21 14:07:25 -05:00

blackfin.c

usb: phy: generic: allow multiples calls to usb_phy_generic_register()

2014-04-21 14:07:25 -05:00

blackfin.h

usb: musb: drop a gigantic amount of ifdeferry

2011-07-01 14:31:10 -07:00

cppi_dma.c

usb: musb: dma: merge ->start/stop into create/destroy

2013-07-29 13:53:18 +03:00

cppi_dma.h

…

da8xx.c

usb: phy: generic: allow multiples calls to usb_phy_generic_register()

2014-04-21 14:07:25 -05:00

davinci.c

usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove()

2014-04-21 14:07:25 -05:00

davinci.h

usb: musb: davinci: Fix build breakage

2012-06-04 18:29:42 +03:00

jz4740.c

usb: musb: add support for JZ4740 usb device controller

2013-12-20 09:53:24 -06:00

Kconfig

usb: musb: omap2plus bus glue needs USB host support

2014-05-14 09:23:32 -05:00

Makefile

usb: musb: add support for JZ4740 usb device controller

2013-12-20 09:53:24 -06:00

musb_am335x.c

usb: musb: Fix panic upon musb_am335x module removal

2014-06-27 10:53:06 -05:00

musb_core.c

usb: musb: core: Handle Babble condition only in HOST mode

2014-06-19 15:43:07 -05:00

musb_core.h

usb: musb: tusb6010: Add tusb_revision to struct musb to store the revision.

2014-05-16 12:14:55 -05:00

musb_cppi41.c

usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq

2014-06-27 10:53:37 -05:00

musb_debug.h

usb: musb: remove extern qualifier from musb_debug.h header

2011-12-21 13:21:02 +02:00

musb_debugfs.c

usb: remove use of __devinit

2012-11-21 13:27:16 -08:00

musb_dma.h

usb: musb dma: add cppi41 dma driver

2013-08-09 17:40:16 +03:00

musb_dsps.c

usb: musb: dsps: fix the base address for accessing the mode register

2014-06-30 13:31:48 -05:00

musb_gadget_ep0.c

usb: musb: gadget: read ep0 fifo only if rxcount is non zero

2013-04-02 11:42:50 +03:00

musb_gadget.c

usb: musb: fix setting JZ4740 gadget periphal mode on reset

2013-12-20 09:53:59 -06:00

musb_gadget.h

usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes

2013-05-28 19:22:23 +03:00

musb_host.c

usb: patches for v3.15

2014-03-07 16:47:36 -08:00

musb_host.h

usb: musb: fix prototype for musb_port_reset

2013-12-20 15:05:43 -06:00

musb_io.h

usb: musb: use io{read,write}*_rep accessors

2012-12-17 17:15:13 -08:00

musb_regs.h

usb: musb: tusb6010: fix compilation

2011-08-12 11:52:50 +03:00

musb_virthub.c

usb: musb: correct use of schedule_delayed_work()

2014-02-20 09:17:24 -06:00

musbhsdma.c

usb: musb: dma: merge ->start/stop into create/destroy

2013-07-29 13:53:18 +03:00

musbhsdma.h

usb: musb: remove generic_interrupt

2012-11-06 15:32:13 +02:00

omap2430.c

usb: musb: omap2430: make sure clocks are enabled when running mailbox

2014-04-15 12:08:02 -05:00

omap2430.h

usb: start using the control module driver

2013-01-25 12:27:24 +02:00

tusb6010_omap.c

usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.

2014-05-16 12:16:31 -05:00

tusb6010.c

usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.

2014-05-16 12:16:31 -05:00

tusb6010.h

usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.

2014-05-16 12:16:31 -05:00

ux500_dma.c

usb: musb: ux500_dma: fix potential NULL dereference error

2013-12-17 13:17:42 -06:00

ux500.c

usb: musb: ux500: don't propagate the OF node

2014-06-19 10:06:47 -05:00