mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-18 06:50:08 +00:00
d0fc2eaaf4
Moved Freescale SoC related bindings out of booting-without-of.txt and into their own files. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
68 lines
2.2 KiB
Plaintext
68 lines
2.2 KiB
Plaintext
* Freescale Communications Processor Module
|
|
|
|
NOTE: This is an interim binding, and will likely change slightly,
|
|
as more devices are supported. The QE bindings especially are
|
|
incomplete.
|
|
|
|
* Root CPM node
|
|
|
|
Properties:
|
|
- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
|
|
- reg : A 48-byte region beginning with CPCR.
|
|
|
|
Example:
|
|
cpm@119c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
|
|
reg = <119c0 30>;
|
|
}
|
|
|
|
* Properties common to mulitple CPM/QE devices
|
|
|
|
- fsl,cpm-command : This value is ORed with the opcode and command flag
|
|
to specify the device on which a CPM command operates.
|
|
|
|
- fsl,cpm-brg : Indicates which baud rate generator the device
|
|
is associated with. If absent, an unused BRG
|
|
should be dynamically allocated. If zero, the
|
|
device uses an external clock rather than a BRG.
|
|
|
|
- reg : Unless otherwise specified, the first resource represents the
|
|
scc/fcc/ucc registers, and the second represents the device's
|
|
parameter RAM region (if it has one).
|
|
|
|
* Multi-User RAM (MURAM)
|
|
|
|
The multi-user/dual-ported RAM is expressed as a bus under the CPM node.
|
|
|
|
Ranges must be set up subject to the following restrictions:
|
|
|
|
- Children's reg nodes must be offsets from the start of all muram, even
|
|
if the user-data area does not begin at zero.
|
|
- If multiple range entries are used, the difference between the parent
|
|
address and the child address must be the same in all, so that a single
|
|
mapping can cover them all while maintaining the ability to determine
|
|
CPM-side offsets with pointer subtraction. It is recommended that
|
|
multiple range entries not be used.
|
|
- A child address of zero must be translatable, even if no reg resources
|
|
contain it.
|
|
|
|
A child "data" node must exist, compatible with "fsl,cpm-muram-data", to
|
|
indicate the portion of muram that is usable by the OS for arbitrary
|
|
purposes. The data node may have an arbitrary number of reg resources,
|
|
all of which contribute to the allocatable muram pool.
|
|
|
|
Example, based on mpc8272:
|
|
muram@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 10000>;
|
|
|
|
data@0 {
|
|
compatible = "fsl,cpm-muram-data";
|
|
reg = <0 2000 9800 800>;
|
|
};
|
|
};
|