linux/drivers/staging/brcm80211
Joe Perches f4528696d8 staging: brcm80211: Fix WL_<type> logging macros
These macros use the equivalent of "#define WL_<type>(x) printk x"
which requires an extra level of parentheses.

Convert the macros to use the normal WL_<type>(fmt, args...) style
and remove the extra parentheses from the uses.

Add format argument verification using no_printk as appropriate.
Couple of spelling typo fixes in the formats and argument alignment
at the same time. Also coalesced long formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 12:25:37 -08:00
..
brcmfmac staging: brcm80211: Fix WL_<type> logging macros 2010-12-16 12:25:37 -08:00
include staging: brcm80211: Convert ETHER_TYPE_802_1X to ETH_P_PAE 2010-12-16 12:21:30 -08:00
phy
sys staging: brcm80211: Fix WL_<type> logging macros 2010-12-16 12:25:37 -08:00
util staging: brcm80211: Convert ETHER_ADDR_LEN to ETH_ALEN 2010-12-16 12:21:28 -08:00
Kconfig
Makefile
README
TODO

Broadcom Mac80211 driver

This is a driver in progress.  It has features still to be implemented well as
bugs in current code.


What's here and not here
=======================
- Completely open source host driver, no binary object files
- Features Broadcom's OneDriver architecture (single source base for
  supported chips and architectures)
- On-chip firmware loaded using standard request_firmware()
- Support for BCM43224, BCM43225, BCM4313 (PCIe NIC)
- Framework for supporting new chips, including mac80211-aware embedded chips
- Does not support older PCI/PCIe chips with SSB backplane
- Driver includes BMAC interface for transparent dongle support
- Uses minstrel_ht rate algorithm
- HW based encryption not enabled yet


What's done
==========
- Integration with mac80211 stack
- A-MPDU single & dual stream rates
- BCM43224:	Dualband, Dual stream, 20MHz channels
	Throughput (in chamber): ~85-90 Mbits/sec (in both 2.4 & 5 GHz bands)
- BCM43225:	2.4 GHz, Dual Stream, 20MHz channels
	Throughput (in chamber): ~85-90 Mbits/sec
- BCM4313:		2.4 GHz, Single Stream
	Throughput (in chamber): ~40 Mbits/sec


Things To Be Done
=================
See the TODO file


Firmware installation
======================
Firmware is available from the Linux firmware repository at:

	git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
	http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git
	https://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git

For all chips, copy brcm/bcm43xx-0.fw and brcm/bcm43xx_hdr-0.fw to
/lib/firmware/brcm (or wherever firmware is normally installed on your system).

Currently supported chips
==============
PCI
Name		Device ID
BCM4313		0x4727
BCM43224	0x4353
BCM43225	0x4357


Bugs/Problems
==============
- Driver can get confused while scanning during high throughput, can cause
  burping, hanging, and possible crashing.
- Occasional hangs & burps with BCM43224 on 2.4 GHz with dual stream rates.
- Occasional crashes with BCM43224 on multicore machines.


Note on Regulatory Implementation
================================
This generation of chips contain additional regulatory support independent of
the driver. The devices use a single worldwide regulatory domain, with channels
12-14 (2.4 GHz band) and channels 52-64 and 100-140 (5 GHz band) restricted to
passive operation. Transmission on those channels is suppressed until
appropriate other traffic is observed on those channels.

Within the driver, we use the ficticious country code "X2" to represent this
worldwide regulatory domain. There is currently no interface to configure a
different domain.

The driver reads the SROM country code from the chip and hands it up to
mac80211 as the regulatory hint, however this information is otherwise unused
with the driver.


Contact Info:
=============
Brett Rudley		brudley@broadcom.com
Henry Ptasinski		henryp@broadcom.com
Dowan Kim			dowan@broadcom.com
Roland Vossen		rvossen@broadcom.com
Arend van Spriel	arend@broadcom.com