Chaotian Jing 08b137d90e mmc: core: Fix init_card in 52Mhz ... Suppose that we got a data crc error, and it triggers the mmc_reset. mmc_reset will call mmc_send_status to see if HW reset was supported. before issue CMD13, it will do retune, and if EMMC was in HS400 mode, it will reduce frequency to 52Mhz firstly, then results in card init was doing at 52Mhz. The mmc_send_status was originally only done for mmc_test, should drop it. And, rename the "eMMC hardware reset" to "Reset test", as we would also be able to use the test for SD-cards. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: bd11e8bd03 ("mmc: core: Flag re-tuning is needed on CRC errors") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2015-10-21 10:18:11 +02:00
..
card	mmc: core: Fix init_card in 52Mhz	2015-10-21 10:18:11 +02:00
core	mmc: core: Fix init_card in 52Mhz	2015-10-21 10:18:11 +02:00
host	mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk	2015-10-08 19:55:05 +02:00
Kconfig
Makefile	mmc: sdhci-pci: add platform data	2012-01-11 23:58:47 -05:00