linux/drivers/mmc/core
Lars-Peter Clausen 19f4424677 mmc: dt: Allow to specify that no write protect signal is present
Allow to specify in the device-tree that no physical write-protect signal
is connected to a particular instance of a MMC controller. Setting the
property will cause the core will assume that the SD card is always
read-write.

The name for the new property is 'disable-wp' and was chosen based on the
property with the same function from the Synopsys designware mobile storage
host controller DT bindings specification.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:00 +02:00
..
bus.c Revert "mmc: core: Convert mmc_driver to device_driver" 2015-04-17 11:48:01 +02:00
bus.h
core.c mmc: core: Don't print reset warning if reset is not supported 2015-06-01 09:06:59 +02:00
core.h mmc: core: Add support for HS400 re-tuning 2015-06-01 09:06:57 +02:00
debugfs.c mmc: core: Use mmc_get_ext_csd() instead of mmc_send_ext_csd() 2014-11-10 12:40:44 +01:00
host.c mmc: dt: Allow to specify that no write protect signal is present 2015-06-01 09:07:00 +02:00
host.h mmc: host: Add facility to support re-tuning 2015-06-01 09:06:53 +02:00
Kconfig mmc: core: Use MMC_UNSAFE_RESUME as default behavior 2014-02-13 22:58:15 -05:00
Makefile mmc: pwrseq: add driver for emmc hardware reset 2015-02-04 09:45:09 +01:00
mmc_ops.c mmc: core: Separate out the mmc_switch status check so it can be re-used 2015-06-01 09:06:56 +02:00
mmc_ops.h mmc: core: Separate out the mmc_switch status check so it can be re-used 2015-06-01 09:06:56 +02:00
mmc.c mmc: core: Add support for HS400 re-tuning 2015-06-01 09:06:57 +02:00
pwrseq_emmc.c mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
pwrseq_simple.c mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
pwrseq.c mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc() 2015-04-17 10:17:19 +02:00
pwrseq.h mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
quirks.c mmc: quirks: Fixup debug message 2014-07-09 11:26:03 +02:00
sd_ops.c mmc: sd: warn if card stays busy during init 2014-07-09 11:26:07 +02:00
sd_ops.h
sd.c mmc: Add support for disabling write-protect detection 2015-06-01 09:06:59 +02:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sdio_bus.c mmc: Add SDIO function devicetree subnode parsing 2015-01-19 09:56:26 +01:00
sdio_bus.h
sdio_cis.c
sdio_cis.h
sdio_io.c
sdio_irq.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
sdio_ops.c
sdio_ops.h
sdio.c mmc: core: Enable / disable re-tuning 2015-06-01 09:06:54 +02:00
slot-gpio.c mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts 2015-01-19 09:56:29 +01:00
slot-gpio.h mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core 2015-01-19 09:56:17 +01:00