linux/mm/mlock.c
Eric B Munson 1aab92ec3d mm: mlock: refactor mlock, munlock, and munlockall code
mlock() allows a user to control page out of program memory, but this
comes at the cost of faulting in the entire mapping when it is allocated.
For large mappings where the entire area is not necessary this is not
ideal.  Instead of forcing all locked pages to be present when they are
allocated, this set creates a middle ground.  Pages are marked to be
placed on the unevictable LRU (locked) when they are first used, but they
are not faulted in by the mlock call.

This series introduces a new mlock() system call that takes a flags
argument along with the start address and size.  This flags argument gives
the caller the ability to request memory be locked in the traditional way,
or to be locked after the page is faulted in.  A new MCL flag is added to
mirror the lock on fault behavior from mlock() in mlockall().

There are two main use cases that this set covers.  The first is the
security focussed mlock case.  A buffer is needed that cannot be written
to swap.  The maximum size is known, but on average the memory used is
significantly less than this maximum.  With lock on fault, the buffer is
guaranteed to never be paged out without consuming the maximum size every
time such a buffer is created.

The second use case is focussed on performance.  Portions of a large file
are needed and we want to keep the used portions in memory once accessed.
This is the case for large graphical models where the path through the
graph is not known until run time.  The entire graph is unlikely to be
used in a given invocation, but once a node has been used it needs to stay
resident for further processing.  Given these constraints we have a number
of options.  We can potentially waste a large amount of memory by mlocking
the entire region (this can also cause a significant stall at startup as
the entire file is read in).  We can mlock every page as we access them
without tracking if the page is already resident but this introduces large
overhead for each access.  The third option is mapping the entire region
with PROT_NONE and using a signal handler for SIGSEGV to
mprotect(PROT_READ) and mlock() the needed page.  Doing this page at a
time adds a significant performance penalty.  Batching can be used to
mitigate this overhead, but in order to safely avoid trying to mprotect
pages outside of the mapping, the boundaries of each mapping to be used in
this way must be tracked and available to the signal handler.  This is
precisely what the mm system in the kernel should already be doing.

For mlock(MLOCK_ONFAULT) the user is charged against RLIMIT_MEMLOCK as if
mlock(MLOCK_LOCKED) or mmap(MAP_LOCKED) was used, so when the VMA is
created not when the pages are faulted in.  For mlockall(MCL_ONFAULT) the
user is charged as if MCL_FUTURE was used.  This decision was made to keep
the accounting checks out of the page fault path.

To illustrate the benefit of this set I wrote a test program that mmaps a
5 GB file filled with random data and then makes 15,000,000 accesses to
random addresses in that mapping.  The test program was run 20 times for
each setup.  Results are reported for two program portions, setup and
execution.  The setup phase is calling mmap and optionally mlock on the
entire region.  For most experiments this is trivial, but it highlights
the cost of faulting in the entire region.  Results are averages across
the 20 runs in milliseconds.

mmap with mlock(MLOCK_LOCKED) on entire range:
Setup avg:      8228.666
Processing avg: 8274.257

mmap with mlock(MLOCK_LOCKED) before each access:
Setup avg:      0.113
Processing avg: 90993.552

mmap with PROT_NONE and signal handler and batch size of 1 page:
With the default value in max_map_count, this gets ENOMEM as I attempt
to change the permissions, after upping the sysctl significantly I get:
Setup avg:      0.058
Processing avg: 69488.073
mmap with PROT_NONE and signal handler and batch size of 8 pages:
Setup avg:      0.068
Processing avg: 38204.116

mmap with PROT_NONE and signal handler and batch size of 16 pages:
Setup avg:      0.044
Processing avg: 29671.180

mmap with mlock(MLOCK_ONFAULT) on entire range:
Setup avg:      0.189
Processing avg: 17904.899

The signal handler in the batch cases faulted in memory in two steps to
avoid having to know the start and end of the faulting mapping.  The first
step covers the page that caused the fault as we know that it will be
possible to lock.  The second step speculatively tries to mlock and
mprotect the batch size - 1 pages that follow.  There may be a clever way
to avoid this without having the program track each mapping to be covered
by this handeler in a globally accessible structure, but I could not find
it.  It should be noted that with a large enough batch size this two step
fault handler can still cause the program to crash if it reaches far
beyond the end of the mapping.

These results show that if the developer knows that a majority of the
mapping will be used, it is better to try and fault it in at once,
otherwise mlock(MLOCK_ONFAULT) is significantly faster.

The performance cost of these patches are minimal on the two benchmarks I
have tested (stream and kernbench).  The following are the average values
across 20 runs of stream and 10 runs of kernbench after a warmup run whose
results were discarded.

Avg throughput in MB/s from stream using 1000000 element arrays
Test     4.2-rc1      4.2-rc1+lock-on-fault
Copy:    10,566.5     10,421
Scale:   10,685       10,503.5
Add:     12,044.1     11,814.2
Triad:   12,064.8     11,846.3

Kernbench optimal load
                 4.2-rc1  4.2-rc1+lock-on-fault
Elapsed Time     78.453   78.991
User Time        64.2395  65.2355
System Time      9.7335   9.7085
Context Switches 22211.5  22412.1
Sleeps           14965.3  14956.1

This patch (of 6):

Extending the mlock system call is very difficult because it currently
does not take a flags argument.  A later patch in this set will extend
mlock to support a middle ground between pages that are locked and faulted
in immediately and unlocked pages.  To pave the way for the new system
call, the code needs some reorganization so that all the actual entry
point handles is checking input and translating to VMA flags.

Signed-off-by: Eric B Munson <emunson@akamai.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00

763 lines
20 KiB
C

/*
* linux/mm/mlock.c
*
* (C) Copyright 1995 Linus Torvalds
* (C) Copyright 2002 Christoph Hellwig
*/
#include <linux/capability.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/mempolicy.h>
#include <linux/syscalls.h>
#include <linux/sched.h>
#include <linux/export.h>
#include <linux/rmap.h>
#include <linux/mmzone.h>
#include <linux/hugetlb.h>
#include <linux/memcontrol.h>
#include <linux/mm_inline.h>
#include "internal.h"
int can_do_mlock(void)
{
if (rlimit(RLIMIT_MEMLOCK) != 0)
return 1;
if (capable(CAP_IPC_LOCK))
return 1;
return 0;
}
EXPORT_SYMBOL(can_do_mlock);
/*
* Mlocked pages are marked with PageMlocked() flag for efficient testing
* in vmscan and, possibly, the fault path; and to support semi-accurate
* statistics.
*
* An mlocked page [PageMlocked(page)] is unevictable. As such, it will
* be placed on the LRU "unevictable" list, rather than the [in]active lists.
* The unevictable list is an LRU sibling list to the [in]active lists.
* PageUnevictable is set to indicate the unevictable state.
*
* When lazy mlocking via vmscan, it is important to ensure that the
* vma's VM_LOCKED status is not concurrently being modified, otherwise we
* may have mlocked a page that is being munlocked. So lazy mlock must take
* the mmap_sem for read, and verify that the vma really is locked
* (see mm/rmap.c).
*/
/*
* LRU accounting for clear_page_mlock()
*/
void clear_page_mlock(struct page *page)
{
if (!TestClearPageMlocked(page))
return;
mod_zone_page_state(page_zone(page), NR_MLOCK,
-hpage_nr_pages(page));
count_vm_event(UNEVICTABLE_PGCLEARED);
if (!isolate_lru_page(page)) {
putback_lru_page(page);
} else {
/*
* We lost the race. the page already moved to evictable list.
*/
if (PageUnevictable(page))
count_vm_event(UNEVICTABLE_PGSTRANDED);
}
}
/*
* Mark page as mlocked if not already.
* If page on LRU, isolate and putback to move to unevictable list.
*/
void mlock_vma_page(struct page *page)
{
/* Serialize with page migration */
BUG_ON(!PageLocked(page));
if (!TestSetPageMlocked(page)) {
mod_zone_page_state(page_zone(page), NR_MLOCK,
hpage_nr_pages(page));
count_vm_event(UNEVICTABLE_PGMLOCKED);
if (!isolate_lru_page(page))
putback_lru_page(page);
}
}
/*
* Isolate a page from LRU with optional get_page() pin.
* Assumes lru_lock already held and page already pinned.
*/
static bool __munlock_isolate_lru_page(struct page *page, bool getpage)
{
if (PageLRU(page)) {
struct lruvec *lruvec;
lruvec = mem_cgroup_page_lruvec(page, page_zone(page));
if (getpage)
get_page(page);
ClearPageLRU(page);
del_page_from_lru_list(page, lruvec, page_lru(page));
return true;
}
return false;
}
/*
* Finish munlock after successful page isolation
*
* Page must be locked. This is a wrapper for try_to_munlock()
* and putback_lru_page() with munlock accounting.
*/
static void __munlock_isolated_page(struct page *page)
{
int ret = SWAP_AGAIN;
/*
* Optimization: if the page was mapped just once, that's our mapping
* and we don't need to check all the other vmas.
*/
if (page_mapcount(page) > 1)
ret = try_to_munlock(page);
/* Did try_to_unlock() succeed or punt? */
if (ret != SWAP_MLOCK)
count_vm_event(UNEVICTABLE_PGMUNLOCKED);
putback_lru_page(page);
}
/*
* Accounting for page isolation fail during munlock
*
* Performs accounting when page isolation fails in munlock. There is nothing
* else to do because it means some other task has already removed the page
* from the LRU. putback_lru_page() will take care of removing the page from
* the unevictable list, if necessary. vmscan [page_referenced()] will move
* the page back to the unevictable list if some other vma has it mlocked.
*/
static void __munlock_isolation_failed(struct page *page)
{
if (PageUnevictable(page))
__count_vm_event(UNEVICTABLE_PGSTRANDED);
else
__count_vm_event(UNEVICTABLE_PGMUNLOCKED);
}
/**
* munlock_vma_page - munlock a vma page
* @page - page to be unlocked, either a normal page or THP page head
*
* returns the size of the page as a page mask (0 for normal page,
* HPAGE_PMD_NR - 1 for THP head page)
*
* called from munlock()/munmap() path with page supposedly on the LRU.
* When we munlock a page, because the vma where we found the page is being
* munlock()ed or munmap()ed, we want to check whether other vmas hold the
* page locked so that we can leave it on the unevictable lru list and not
* bother vmscan with it. However, to walk the page's rmap list in
* try_to_munlock() we must isolate the page from the LRU. If some other
* task has removed the page from the LRU, we won't be able to do that.
* So we clear the PageMlocked as we might not get another chance. If we
* can't isolate the page, we leave it for putback_lru_page() and vmscan
* [page_referenced()/try_to_unmap()] to deal with.
*/
unsigned int munlock_vma_page(struct page *page)
{
unsigned int nr_pages;
struct zone *zone = page_zone(page);
/* For try_to_munlock() and to serialize with page migration */
BUG_ON(!PageLocked(page));
/*
* Serialize with any parallel __split_huge_page_refcount() which
* might otherwise copy PageMlocked to part of the tail pages before
* we clear it in the head page. It also stabilizes hpage_nr_pages().
*/
spin_lock_irq(&zone->lru_lock);
nr_pages = hpage_nr_pages(page);
if (!TestClearPageMlocked(page))
goto unlock_out;
__mod_zone_page_state(zone, NR_MLOCK, -nr_pages);
if (__munlock_isolate_lru_page(page, true)) {
spin_unlock_irq(&zone->lru_lock);
__munlock_isolated_page(page);
goto out;
}
__munlock_isolation_failed(page);
unlock_out:
spin_unlock_irq(&zone->lru_lock);
out:
return nr_pages - 1;
}
/*
* convert get_user_pages() return value to posix mlock() error
*/
static int __mlock_posix_error_return(long retval)
{
if (retval == -EFAULT)
retval = -ENOMEM;
else if (retval == -ENOMEM)
retval = -EAGAIN;
return retval;
}
/*
* Prepare page for fast batched LRU putback via putback_lru_evictable_pagevec()
*
* The fast path is available only for evictable pages with single mapping.
* Then we can bypass the per-cpu pvec and get better performance.
* when mapcount > 1 we need try_to_munlock() which can fail.
* when !page_evictable(), we need the full redo logic of putback_lru_page to
* avoid leaving evictable page in unevictable list.
*
* In case of success, @page is added to @pvec and @pgrescued is incremented
* in case that the page was previously unevictable. @page is also unlocked.
*/
static bool __putback_lru_fast_prepare(struct page *page, struct pagevec *pvec,
int *pgrescued)
{
VM_BUG_ON_PAGE(PageLRU(page), page);
VM_BUG_ON_PAGE(!PageLocked(page), page);
if (page_mapcount(page) <= 1 && page_evictable(page)) {
pagevec_add(pvec, page);
if (TestClearPageUnevictable(page))
(*pgrescued)++;
unlock_page(page);
return true;
}
return false;
}
/*
* Putback multiple evictable pages to the LRU
*
* Batched putback of evictable pages that bypasses the per-cpu pvec. Some of
* the pages might have meanwhile become unevictable but that is OK.
*/
static void __putback_lru_fast(struct pagevec *pvec, int pgrescued)
{
count_vm_events(UNEVICTABLE_PGMUNLOCKED, pagevec_count(pvec));
/*
*__pagevec_lru_add() calls release_pages() so we don't call
* put_page() explicitly
*/
__pagevec_lru_add(pvec);
count_vm_events(UNEVICTABLE_PGRESCUED, pgrescued);
}
/*
* Munlock a batch of pages from the same zone
*
* The work is split to two main phases. First phase clears the Mlocked flag
* and attempts to isolate the pages, all under a single zone lru lock.
* The second phase finishes the munlock only for pages where isolation
* succeeded.
*
* Note that the pagevec may be modified during the process.
*/
static void __munlock_pagevec(struct pagevec *pvec, struct zone *zone)
{
int i;
int nr = pagevec_count(pvec);
int delta_munlocked;
struct pagevec pvec_putback;
int pgrescued = 0;
pagevec_init(&pvec_putback, 0);
/* Phase 1: page isolation */
spin_lock_irq(&zone->lru_lock);
for (i = 0; i < nr; i++) {
struct page *page = pvec->pages[i];
if (TestClearPageMlocked(page)) {
/*
* We already have pin from follow_page_mask()
* so we can spare the get_page() here.
*/
if (__munlock_isolate_lru_page(page, false))
continue;
else
__munlock_isolation_failed(page);
}
/*
* We won't be munlocking this page in the next phase
* but we still need to release the follow_page_mask()
* pin. We cannot do it under lru_lock however. If it's
* the last pin, __page_cache_release() would deadlock.
*/
pagevec_add(&pvec_putback, pvec->pages[i]);
pvec->pages[i] = NULL;
}
delta_munlocked = -nr + pagevec_count(&pvec_putback);
__mod_zone_page_state(zone, NR_MLOCK, delta_munlocked);
spin_unlock_irq(&zone->lru_lock);
/* Now we can release pins of pages that we are not munlocking */
pagevec_release(&pvec_putback);
/* Phase 2: page munlock */
for (i = 0; i < nr; i++) {
struct page *page = pvec->pages[i];
if (page) {
lock_page(page);
if (!__putback_lru_fast_prepare(page, &pvec_putback,
&pgrescued)) {
/*
* Slow path. We don't want to lose the last
* pin before unlock_page()
*/
get_page(page); /* for putback_lru_page() */
__munlock_isolated_page(page);
unlock_page(page);
put_page(page); /* from follow_page_mask() */
}
}
}
/*
* Phase 3: page putback for pages that qualified for the fast path
* This will also call put_page() to return pin from follow_page_mask()
*/
if (pagevec_count(&pvec_putback))
__putback_lru_fast(&pvec_putback, pgrescued);
}
/*
* Fill up pagevec for __munlock_pagevec using pte walk
*
* The function expects that the struct page corresponding to @start address is
* a non-TPH page already pinned and in the @pvec, and that it belongs to @zone.
*
* The rest of @pvec is filled by subsequent pages within the same pmd and same
* zone, as long as the pte's are present and vm_normal_page() succeeds. These
* pages also get pinned.
*
* Returns the address of the next page that should be scanned. This equals
* @start + PAGE_SIZE when no page could be added by the pte walk.
*/
static unsigned long __munlock_pagevec_fill(struct pagevec *pvec,
struct vm_area_struct *vma, int zoneid, unsigned long start,
unsigned long end)
{
pte_t *pte;
spinlock_t *ptl;
/*
* Initialize pte walk starting at the already pinned page where we
* are sure that there is a pte, as it was pinned under the same
* mmap_sem write op.
*/
pte = get_locked_pte(vma->vm_mm, start, &ptl);
/* Make sure we do not cross the page table boundary */
end = pgd_addr_end(start, end);
end = pud_addr_end(start, end);
end = pmd_addr_end(start, end);
/* The page next to the pinned page is the first we will try to get */
start += PAGE_SIZE;
while (start < end) {
struct page *page = NULL;
pte++;
if (pte_present(*pte))
page = vm_normal_page(vma, start, *pte);
/*
* Break if page could not be obtained or the page's node+zone does not
* match
*/
if (!page || page_zone_id(page) != zoneid)
break;
get_page(page);
/*
* Increase the address that will be returned *before* the
* eventual break due to pvec becoming full by adding the page
*/
start += PAGE_SIZE;
if (pagevec_add(pvec, page) == 0)
break;
}
pte_unmap_unlock(pte, ptl);
return start;
}
/*
* munlock_vma_pages_range() - munlock all pages in the vma range.'
* @vma - vma containing range to be munlock()ed.
* @start - start address in @vma of the range
* @end - end of range in @vma.
*
* For mremap(), munmap() and exit().
*
* Called with @vma VM_LOCKED.
*
* Returns with VM_LOCKED cleared. Callers must be prepared to
* deal with this.
*
* We don't save and restore VM_LOCKED here because pages are
* still on lru. In unmap path, pages might be scanned by reclaim
* and re-mlocked by try_to_{munlock|unmap} before we unmap and
* free them. This will result in freeing mlocked pages.
*/
void munlock_vma_pages_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
vma->vm_flags &= ~VM_LOCKED;
while (start < end) {
struct page *page = NULL;
unsigned int page_mask;
unsigned long page_increm;
struct pagevec pvec;
struct zone *zone;
int zoneid;
pagevec_init(&pvec, 0);
/*
* Although FOLL_DUMP is intended for get_dump_page(),
* it just so happens that its special treatment of the
* ZERO_PAGE (returning an error instead of doing get_page)
* suits munlock very well (and if somehow an abnormal page
* has sneaked into the range, we won't oops here: great).
*/
page = follow_page_mask(vma, start, FOLL_GET | FOLL_DUMP,
&page_mask);
if (page && !IS_ERR(page)) {
if (PageTransHuge(page)) {
lock_page(page);
/*
* Any THP page found by follow_page_mask() may
* have gotten split before reaching
* munlock_vma_page(), so we need to recompute
* the page_mask here.
*/
page_mask = munlock_vma_page(page);
unlock_page(page);
put_page(page); /* follow_page_mask() */
} else {
/*
* Non-huge pages are handled in batches via
* pagevec. The pin from follow_page_mask()
* prevents them from collapsing by THP.
*/
pagevec_add(&pvec, page);
zone = page_zone(page);
zoneid = page_zone_id(page);
/*
* Try to fill the rest of pagevec using fast
* pte walk. This will also update start to
* the next page to process. Then munlock the
* pagevec.
*/
start = __munlock_pagevec_fill(&pvec, vma,
zoneid, start, end);
__munlock_pagevec(&pvec, zone);
goto next;
}
}
/* It's a bug to munlock in the middle of a THP page */
VM_BUG_ON((start >> PAGE_SHIFT) & page_mask);
page_increm = 1 + page_mask;
start += page_increm * PAGE_SIZE;
next:
cond_resched();
}
}
/*
* mlock_fixup - handle mlock[all]/munlock[all] requests.
*
* Filters out "special" vmas -- VM_LOCKED never gets set for these, and
* munlock is a no-op. However, for some special vmas, we go ahead and
* populate the ptes.
*
* For vmas that pass the filters, merge/split as appropriate.
*/
static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev,
unsigned long start, unsigned long end, vm_flags_t newflags)
{
struct mm_struct *mm = vma->vm_mm;
pgoff_t pgoff;
int nr_pages;
int ret = 0;
int lock = !!(newflags & VM_LOCKED);
if (newflags == vma->vm_flags || (vma->vm_flags & VM_SPECIAL) ||
is_vm_hugetlb_page(vma) || vma == get_gate_vma(current->mm))
goto out; /* don't set VM_LOCKED, don't count */
pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
*prev = vma_merge(mm, *prev, start, end, newflags, vma->anon_vma,
vma->vm_file, pgoff, vma_policy(vma),
vma->vm_userfaultfd_ctx);
if (*prev) {
vma = *prev;
goto success;
}
if (start != vma->vm_start) {
ret = split_vma(mm, vma, start, 1);
if (ret)
goto out;
}
if (end != vma->vm_end) {
ret = split_vma(mm, vma, end, 0);
if (ret)
goto out;
}
success:
/*
* Keep track of amount of locked VM.
*/
nr_pages = (end - start) >> PAGE_SHIFT;
if (!lock)
nr_pages = -nr_pages;
mm->locked_vm += nr_pages;
/*
* vm_flags is protected by the mmap_sem held in write mode.
* It's okay if try_to_unmap_one unmaps a page just after we
* set VM_LOCKED, populate_vma_page_range will bring it back.
*/
if (lock)
vma->vm_flags = newflags;
else
munlock_vma_pages_range(vma, start, end);
out:
*prev = vma;
return ret;
}
static int apply_vma_lock_flags(unsigned long start, size_t len,
vm_flags_t flags)
{
unsigned long nstart, end, tmp;
struct vm_area_struct * vma, * prev;
int error;
VM_BUG_ON(offset_in_page(start));
VM_BUG_ON(len != PAGE_ALIGN(len));
end = start + len;
if (end < start)
return -EINVAL;
if (end == start)
return 0;
vma = find_vma(current->mm, start);
if (!vma || vma->vm_start > start)
return -ENOMEM;
prev = vma->vm_prev;
if (start > vma->vm_start)
prev = vma;
for (nstart = start ; ; ) {
vm_flags_t newflags = vma->vm_flags & ~VM_LOCKED;
newflags |= flags;
/* Here we know that vma->vm_start <= nstart < vma->vm_end. */
tmp = vma->vm_end;
if (tmp > end)
tmp = end;
error = mlock_fixup(vma, &prev, nstart, tmp, newflags);
if (error)
break;
nstart = tmp;
if (nstart < prev->vm_end)
nstart = prev->vm_end;
if (nstart >= end)
break;
vma = prev->vm_next;
if (!vma || vma->vm_start != nstart) {
error = -ENOMEM;
break;
}
}
return error;
}
static int do_mlock(unsigned long start, size_t len, vm_flags_t flags)
{
unsigned long locked;
unsigned long lock_limit;
int error = -ENOMEM;
if (!can_do_mlock())
return -EPERM;
lru_add_drain_all(); /* flush pagevec */
len = PAGE_ALIGN(len + (offset_in_page(start)));
start &= PAGE_MASK;
lock_limit = rlimit(RLIMIT_MEMLOCK);
lock_limit >>= PAGE_SHIFT;
locked = len >> PAGE_SHIFT;
down_write(&current->mm->mmap_sem);
locked += current->mm->locked_vm;
/* check against resource limits */
if ((locked <= lock_limit) || capable(CAP_IPC_LOCK))
error = apply_vma_lock_flags(start, len, flags);
up_write(&current->mm->mmap_sem);
if (error)
return error;
error = __mm_populate(start, len, 0);
if (error)
return __mlock_posix_error_return(error);
return 0;
}
SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
{
return do_mlock(start, len, VM_LOCKED);
}
SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
{
int ret;
len = PAGE_ALIGN(len + (offset_in_page(start)));
start &= PAGE_MASK;
down_write(&current->mm->mmap_sem);
ret = apply_vma_lock_flags(start, len, 0);
up_write(&current->mm->mmap_sem);
return ret;
}
static int apply_mlockall_flags(int flags)
{
struct vm_area_struct * vma, * prev = NULL;
if (flags & MCL_FUTURE)
current->mm->def_flags |= VM_LOCKED;
else
current->mm->def_flags &= ~VM_LOCKED;
if (flags == MCL_FUTURE)
goto out;
for (vma = current->mm->mmap; vma ; vma = prev->vm_next) {
vm_flags_t newflags;
newflags = vma->vm_flags & ~VM_LOCKED;
if (flags & MCL_CURRENT)
newflags |= VM_LOCKED;
/* Ignore errors */
mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
cond_resched_rcu_qs();
}
out:
return 0;
}
SYSCALL_DEFINE1(mlockall, int, flags)
{
unsigned long lock_limit;
int ret;
if (!flags || (flags & ~(MCL_CURRENT | MCL_FUTURE)))
return -EINVAL;
if (!can_do_mlock())
return -EPERM;
if (flags & MCL_CURRENT)
lru_add_drain_all(); /* flush pagevec */
lock_limit = rlimit(RLIMIT_MEMLOCK);
lock_limit >>= PAGE_SHIFT;
ret = -ENOMEM;
down_write(&current->mm->mmap_sem);
if (!(flags & MCL_CURRENT) || (current->mm->total_vm <= lock_limit) ||
capable(CAP_IPC_LOCK))
ret = apply_mlockall_flags(flags);
up_write(&current->mm->mmap_sem);
if (!ret && (flags & MCL_CURRENT))
mm_populate(0, TASK_SIZE);
return ret;
}
SYSCALL_DEFINE0(munlockall)
{
int ret;
down_write(&current->mm->mmap_sem);
ret = apply_mlockall_flags(0);
up_write(&current->mm->mmap_sem);
return ret;
}
/*
* Objects with different lifetime than processes (SHM_LOCK and SHM_HUGETLB
* shm segments) get accounted against the user_struct instead.
*/
static DEFINE_SPINLOCK(shmlock_user_lock);
int user_shm_lock(size_t size, struct user_struct *user)
{
unsigned long lock_limit, locked;
int allowed = 0;
locked = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
lock_limit = rlimit(RLIMIT_MEMLOCK);
if (lock_limit == RLIM_INFINITY)
allowed = 1;
lock_limit >>= PAGE_SHIFT;
spin_lock(&shmlock_user_lock);
if (!allowed &&
locked + user->locked_shm > lock_limit && !capable(CAP_IPC_LOCK))
goto out;
get_uid(user);
user->locked_shm += locked;
allowed = 1;
out:
spin_unlock(&shmlock_user_lock);
return allowed;
}
void user_shm_unlock(size_t size, struct user_struct *user)
{
spin_lock(&shmlock_user_lock);
user->locked_shm -= (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
spin_unlock(&shmlock_user_lock);
free_uid(user);
}