Marcin Niestroj 1b211d48ab iio: st_pressure: Fix data sign ... Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that the pressure and temperature data is a 2's complement. I'm sending this the slow way, as negative pressures on these are pretty unusual and the nature of the fixing of multiple device introduction patches will make it hard to apply to older kernels - Jonathan. Fixes: 217494e5b7 ("iio:pressure: Add STMicroelectronics pressures driver") Fixes: 2f5effcbd0 ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor") Fixes: 7885a8ce68 ("iio: pressure: st: Add support for new LPS001WP pressure sensor") Fixes: e039e2f5b4 ("iio:st_pressure:initial lps22hb sensor support") Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-12-30 11:31:16 +00:00
..
accel	iio: accel: hid-sensor-accel-3d: Add timestamp	2016-12-03 10:06:13 +00:00
adc	iio: adc: spmi-vadc: Changes to support different scaling	2016-12-10 17:28:21 +00:00
amplifiers
buffer	iio: add resource managed triggered buffer init helpers	2016-09-04 15:42:46 +01:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	iio: accel: hid-sensor-accel-3d: Add timestamp	2016-12-03 10:06:13 +00:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dpot-dac: DAC driver based on a digital potentiometer	2016-11-13 13:07:15 +00:00
dummy
frequency
gyro	iio: gyro: st_gyro: inline per-sensor data	2016-11-12 15:38:09 +00:00
health
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	iio: bmi160: Add of device table for spi	2016-12-30 10:38:19 +00:00
light	iio: light: fix improper return value	2016-12-04 10:56:26 +00:00
magnetometer	iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor	2016-11-24 20:41:30 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: st_pressure: Fix data sign	2016-12-30 11:31:16 +00:00
proximity	iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management	2016-10-23 19:34:26 +01:00
temperature	iio: maxim_thermocouple: detect invalid storage size in read()	2016-11-13 10:08:32 +01:00
trigger
iio_core_trigger.h
iio_core.h
industrialio-buffer.c	iio: Use kmalloc_array() in iio_scan_mask_set()	2016-09-24 16:35:24 +01:00
industrialio-configfs.c
industrialio-core.c	iio:core: add a callback to allow drivers to provide _available attributes	2016-11-13 11:40:25 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: add helpers to query available values from channels	2016-11-13 11:40:26 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00