Shawn Guo 395816623d ARM: imx: pll1_sys should be an initial on clk
We always boot from PLL1, so let's have pll1_sys in the clks_init_on
list to have clk prepare/enable use count match the hardware status,
so that drivers managing pll1_sys like cpufreq can get the use count
right from the start.

Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11 10:44:40 +08:00
..
2013-02-21 15:27:22 -08:00
2013-02-04 22:56:41 -08:00
2013-02-04 22:56:41 -08:00
2012-11-22 15:32:39 +01:00
2013-01-29 14:05:43 +08:00
2013-02-04 22:24:20 -08:00
2013-01-29 14:05:43 +08:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2013-02-21 15:27:22 -08:00
2012-12-24 09:36:38 -07:00
2013-02-21 14:58:40 -08:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2013-02-28 19:59:34 -08:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2012-12-24 09:36:38 -07:00
2013-01-29 14:05:43 +08:00
2013-01-29 14:05:43 +08:00
2013-01-03 15:57:04 -08:00
2013-01-29 14:05:43 +08:00
2013-01-29 14:05:43 +08:00
2013-02-04 22:24:20 -08:00