linux

mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-18 06:50:08 +00:00

History

Olaf Hering 733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"\|xargs grep -El '(UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux/version.h)'\|grep -Ev '(/(boot\|coda\|drm)/\|~$)'` search pattern: /UTS_RELEASE\\|LINUX_VERSION_CODE\\|KERNEL_VERSION\\|linux\/$utsname\\|version$.h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>		2005-11-09 07:55:57 -08:00
..
3780i.c	[PATCH] fix missing includes	2005-10-30 17:37:32 -08:00
3780i.h
Makefile
mwavedd.c	[SERIAL] Convert mwave to use serial8250_(un)?register_port	2005-08-31 22:19:33 +01:00
mwavedd.h
mwavepub.h
README
smapi.c
smapi.h
tp3780i.c	[PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason	2005-11-09 07:55:57 -08:00
tp3780i.h

README

Module options
--------------

The mwave module takes the following options. Note that these options
are not saved by the BIOS and so do not persist after unload and reload.

mwave_debug=value, where value is bitwise OR of trace flags:
0x0001 mwavedd api tracing
0x0002 smapi api tracing
0x0004 3780i tracing
0x0008 tp3780i tracing

Tracing only occurs if the driver has been compiled with the
MW_TRACE macro #defined (i.e. let EXTRA_CFLAGS += -DMW_TRACE
in the Makefile).

mwave_3780i_irq=5/7/10/11/15
If the dsp irq has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
irq used by the dsp to be configured.

mwave_3780i_io=0x130/0x350/0x0070/0xDB0
If the dsp io range has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
io range used by the dsp to be configured.

mwave_uart_irq=3/4
If the mwave's uart irq has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
irq used by the mwave uart to be configured.

mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
If the uart io range has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
io range used by the mwave uart to be configured.

Example to enable the 3780i DSP using ttyS1 resources:

insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8

Accessing the driver
--------------------

You must also create a node for the driver. Without devfs:
mkdir -p /dev/modems
mknod --mode=660 /dev/modems/mwave c 10 219
With devfs:
mkdir -p /dev/modems
ln -s ../misc/mwave /dev/modems/mwave