Greg Ungerer 201d8975ae serial: mcf: fix no driver name in probe output
The current output of the device probing looks like this:

ColdFire internal UART serial driver
(NULL device *): ttyS0 at MMIO 0xfc060000 (irq = 90, base_baud = 5208333) is a ColdFire UART
console [ttyS0] enabled
(NULL device *): ttyS1 at MMIO 0xfc064000 (irq = 91, base_baud = 5208333) is a ColdFire UART
(NULL device *): ttyS2 at MMIO 0xfc068000 (irq = 92, base_baud = 5208333) is a ColdFire UART

Fix the port device linkage at probing time so that the device name is
printed out properly, and not "(NULL device *)".

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 14:06:57 -08:00
..
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-19 12:57:45 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:43:47 -08:00
2014-12-14 16:10:09 -08:00
2014-12-15 18:06:13 -08:00
2014-12-20 13:42:57 -08:00
2014-12-14 16:10:09 -08:00
2014-12-17 09:59:26 -08:00
2014-12-14 16:10:09 -08:00
2014-12-19 12:57:45 -08:00
2014-12-17 09:59:26 -08:00
2014-12-16 14:53:01 -08:00
2014-12-14 16:10:09 -08:00
2014-12-18 20:24:55 -08:00
2014-12-17 10:10:51 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-20 13:42:57 -08:00
2014-12-20 13:42:57 -08:00
2014-12-14 16:43:47 -08:00
2014-12-20 13:42:57 -08:00
2014-12-17 10:44:22 -08:00
2014-12-14 16:43:47 -08:00
2014-12-15 18:06:13 -08:00
2014-12-15 18:06:13 -08:00