mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-28 20:37:27 +00:00
22f5f10d2d
Oak scsi doesn't use any IRQ, but it sets irq = IRQ_NONE rather than SCSI_IRQ_NONE. Problem is, the core NCR5380 driver expects SCSI_IRQ_NONE if it is to issue IDENTIFY commands that prevent target disconnection. And, as Geert points out, IRQ_NONE is part of enum irqreturn. Other drivers, when they can't get an IRQ or can't use one, will set host->irq = SCSI_IRQ_NONE (that is, 255). But when they exit they will attempt to free IRQ 255 which was never requested. Fix these bugs by using NO_IRQ in place of SCSI_IRQ_NONE and IRQ_NONE. That means IRQ 0 is no longer probed by ISA drivers but I don't think this matters. Setting IRQ = 255 for these ISA drivers is understood to mean no IRQ. This remains supported so as to avoid breaking existing ISA setups (which can be difficult to get working) and because existing documentation (SANE, TLDP etc) describes this usage for the ISA NCR5380 driver options. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
172 lines
4.4 KiB
C
172 lines
4.4 KiB
C
/*
|
|
dmx3191d.c - driver for the Domex DMX3191D SCSI card.
|
|
Copyright (C) 2000 by Massimo Piccioni <dafastidio@libero.it>
|
|
Portions Copyright (C) 2004 by Christoph Hellwig <hch@lst.de>
|
|
|
|
Based on the generic NCR5380 driver by Drew Eckhardt et al.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
/*
|
|
* Definitions for the generic 5380 driver.
|
|
*/
|
|
|
|
#define NCR5380_read(reg) inb(port + reg)
|
|
#define NCR5380_write(reg, value) outb(value, port + reg)
|
|
|
|
#define NCR5380_implementation_fields /* none */
|
|
#define NCR5380_local_declare() unsigned int port
|
|
#define NCR5380_setup(instance) port = instance->io_port
|
|
|
|
/*
|
|
* Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include "scsi.h"
|
|
|
|
#include "NCR5380.h"
|
|
#include "NCR5380.c"
|
|
|
|
#define DMX3191D_DRIVER_NAME "dmx3191d"
|
|
#define DMX3191D_REGION_LEN 8
|
|
|
|
|
|
static struct scsi_host_template dmx3191d_driver_template = {
|
|
.proc_name = DMX3191D_DRIVER_NAME,
|
|
.name = "Domex DMX3191D",
|
|
.queuecommand = NCR5380_queue_command,
|
|
.eh_abort_handler = NCR5380_abort,
|
|
.eh_bus_reset_handler = NCR5380_bus_reset,
|
|
.can_queue = 32,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = 2,
|
|
.use_clustering = DISABLE_CLUSTERING,
|
|
};
|
|
|
|
static int dmx3191d_probe_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct Scsi_Host *shost;
|
|
unsigned long io;
|
|
int error = -ENODEV;
|
|
|
|
if (pci_enable_device(pdev))
|
|
goto out;
|
|
|
|
io = pci_resource_start(pdev, 0);
|
|
if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
|
|
printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
|
|
io, io + DMX3191D_REGION_LEN);
|
|
goto out_disable_device;
|
|
}
|
|
|
|
shost = scsi_host_alloc(&dmx3191d_driver_template,
|
|
sizeof(struct NCR5380_hostdata));
|
|
if (!shost)
|
|
goto out_release_region;
|
|
shost->io_port = io;
|
|
shost->irq = pdev->irq;
|
|
|
|
NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
|
|
|
|
if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
|
|
DMX3191D_DRIVER_NAME, shost)) {
|
|
/*
|
|
* Steam powered scsi controllers run without an IRQ anyway
|
|
*/
|
|
printk(KERN_WARNING "dmx3191: IRQ %d not available - "
|
|
"switching to polled mode.\n", pdev->irq);
|
|
shost->irq = NO_IRQ;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, shost);
|
|
|
|
error = scsi_add_host(shost, &pdev->dev);
|
|
if (error)
|
|
goto out_free_irq;
|
|
|
|
scsi_scan_host(shost);
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
if (shost->irq != NO_IRQ)
|
|
free_irq(shost->irq, shost);
|
|
out_release_region:
|
|
release_region(io, DMX3191D_REGION_LEN);
|
|
out_disable_device:
|
|
pci_disable_device(pdev);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
static void dmx3191d_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct Scsi_Host *shost = pci_get_drvdata(pdev);
|
|
|
|
scsi_remove_host(shost);
|
|
|
|
NCR5380_exit(shost);
|
|
|
|
if (shost->irq != NO_IRQ)
|
|
free_irq(shost->irq, shost);
|
|
release_region(shost->io_port, DMX3191D_REGION_LEN);
|
|
pci_disable_device(pdev);
|
|
|
|
scsi_host_put(shost);
|
|
}
|
|
|
|
static struct pci_device_id dmx3191d_pci_tbl[] = {
|
|
{PCI_VENDOR_ID_DOMEX, PCI_DEVICE_ID_DOMEX_DMX3191D,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, dmx3191d_pci_tbl);
|
|
|
|
static struct pci_driver dmx3191d_pci_driver = {
|
|
.name = DMX3191D_DRIVER_NAME,
|
|
.id_table = dmx3191d_pci_tbl,
|
|
.probe = dmx3191d_probe_one,
|
|
.remove = dmx3191d_remove_one,
|
|
};
|
|
|
|
static int __init dmx3191d_init(void)
|
|
{
|
|
return pci_register_driver(&dmx3191d_pci_driver);
|
|
}
|
|
|
|
static void __exit dmx3191d_exit(void)
|
|
{
|
|
pci_unregister_driver(&dmx3191d_pci_driver);
|
|
}
|
|
|
|
module_init(dmx3191d_init);
|
|
module_exit(dmx3191d_exit);
|
|
|
|
MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
|
|
MODULE_DESCRIPTION("Domex DMX3191D SCSI driver");
|
|
MODULE_LICENSE("GPL");
|