mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-16 14:02:10 +00:00
cbcdd87593
Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
674 lines
18 KiB
C
674 lines
18 KiB
C
/*
|
|
* sata_qstor.c - Pacific Digital Corporation QStor SATA
|
|
*
|
|
* Maintained by: Mark Lord <mlord@pobox.com>
|
|
*
|
|
* Copyright 2005 Pacific Digital Corporation.
|
|
* (OSL/GPL code release authorized by Jalil Fadavi).
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_qstor"
|
|
#define DRV_VERSION "0.09"
|
|
|
|
enum {
|
|
QS_MMIO_BAR = 4,
|
|
|
|
QS_PORTS = 4,
|
|
QS_MAX_PRD = LIBATA_MAX_PRD,
|
|
QS_CPB_ORDER = 6,
|
|
QS_CPB_BYTES = (1 << QS_CPB_ORDER),
|
|
QS_PRD_BYTES = QS_MAX_PRD * 16,
|
|
QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
|
|
|
|
/* global register offsets */
|
|
QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
|
|
QS_HID_HPHY = 0x0004, /* host physical interface info */
|
|
QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */
|
|
QS_HST_SFF = 0x0100, /* host status fifo offset */
|
|
QS_HVS_SERD3 = 0x0393, /* PHY enable offset */
|
|
|
|
/* global control bits */
|
|
QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */
|
|
QS_CNFG3_GSRST = 0x01, /* global chip reset */
|
|
QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/
|
|
|
|
/* per-channel register offsets */
|
|
QS_CCF_CPBA = 0x0710, /* chan CPB base address */
|
|
QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */
|
|
QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */
|
|
QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */
|
|
QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */
|
|
QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */
|
|
QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */
|
|
QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */
|
|
QS_CCT_CFF = 0x0a00, /* chan command fifo offset */
|
|
|
|
/* channel control bits */
|
|
QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */
|
|
QS_CTR0_CLER = (1 << 2), /* clear channel errors */
|
|
QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */
|
|
QS_CTR1_RCHN = (1 << 4), /* reset channel logic */
|
|
QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */
|
|
|
|
/* pkt sub-field headers */
|
|
QS_HCB_HDR = 0x01, /* Host Control Block header */
|
|
QS_DCB_HDR = 0x02, /* Device Control Block header */
|
|
|
|
/* pkt HCB flag bits */
|
|
QS_HF_DIRO = (1 << 0), /* data DIRection Out */
|
|
QS_HF_DAT = (1 << 3), /* DATa pkt */
|
|
QS_HF_IEN = (1 << 4), /* Interrupt ENable */
|
|
QS_HF_VLD = (1 << 5), /* VaLiD pkt */
|
|
|
|
/* pkt DCB flag bits */
|
|
QS_DF_PORD = (1 << 2), /* Pio OR Dma */
|
|
QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */
|
|
|
|
/* PCI device IDs */
|
|
board_2068_idx = 0, /* QStor 4-port SATA/RAID */
|
|
};
|
|
|
|
enum {
|
|
QS_DMA_BOUNDARY = ~0UL
|
|
};
|
|
|
|
typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
|
|
|
|
struct qs_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
qs_state_t state;
|
|
};
|
|
|
|
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
|
|
static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static int qs_port_start(struct ata_port *ap);
|
|
static void qs_host_stop(struct ata_host *host);
|
|
static void qs_phy_reset(struct ata_port *ap);
|
|
static void qs_qc_prep(struct ata_queued_cmd *qc);
|
|
static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
|
|
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void qs_bmdma_stop(struct ata_queued_cmd *qc);
|
|
static u8 qs_bmdma_status(struct ata_port *ap);
|
|
static void qs_irq_clear(struct ata_port *ap);
|
|
static void qs_eng_timeout(struct ata_port *ap);
|
|
|
|
static struct scsi_host_template qs_ata_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = QS_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
//FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = QS_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations qs_ata_ops = {
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.check_atapi_dma = qs_check_atapi_dma,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
.phy_reset = qs_phy_reset,
|
|
.qc_prep = qs_qc_prep,
|
|
.qc_issue = qs_qc_issue,
|
|
.data_xfer = ata_data_xfer,
|
|
.eng_timeout = qs_eng_timeout,
|
|
.irq_clear = qs_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.scr_read = qs_scr_read,
|
|
.scr_write = qs_scr_write,
|
|
.port_start = qs_port_start,
|
|
.host_stop = qs_host_stop,
|
|
.bmdma_stop = qs_bmdma_stop,
|
|
.bmdma_status = qs_bmdma_status,
|
|
};
|
|
|
|
static const struct ata_port_info qs_port_info[] = {
|
|
/* board_2068_idx */
|
|
{
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SATA_RESET |
|
|
//FIXME ATA_FLAG_SRST |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
|
|
.pio_mask = 0x10, /* pio4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &qs_ata_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id qs_ata_pci_tbl[] = {
|
|
{ PCI_VDEVICE(PDC, 0x2068), board_2068_idx },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver qs_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = qs_ata_pci_tbl,
|
|
.probe = qs_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static void __iomem *qs_mmio_base(struct ata_host *host)
|
|
{
|
|
return host->iomap[QS_MMIO_BAR];
|
|
}
|
|
|
|
static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
return 1; /* ATAPI DMA not supported */
|
|
}
|
|
|
|
static void qs_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
/* nothing */
|
|
}
|
|
|
|
static u8 qs_bmdma_status(struct ata_port *ap)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void qs_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* nothing */
|
|
}
|
|
|
|
static inline void qs_enter_reg_mode(struct ata_port *ap)
|
|
{
|
|
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
|
|
|
|
writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
|
|
readb(chan + QS_CCT_CTR0); /* flush */
|
|
}
|
|
|
|
static inline void qs_reset_channel_logic(struct ata_port *ap)
|
|
{
|
|
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
|
|
|
|
writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1);
|
|
readb(chan + QS_CCT_CTR0); /* flush */
|
|
qs_enter_reg_mode(ap);
|
|
}
|
|
|
|
static void qs_phy_reset(struct ata_port *ap)
|
|
{
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
|
|
pp->state = qs_state_idle;
|
|
qs_reset_channel_logic(ap);
|
|
sata_phy_reset(ap);
|
|
}
|
|
|
|
static void qs_eng_timeout(struct ata_port *ap)
|
|
{
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
|
|
if (pp->state != qs_state_idle) /* healthy paranoia */
|
|
pp->state = qs_state_mmio;
|
|
qs_reset_channel_logic(ap);
|
|
ata_eng_timeout(ap);
|
|
}
|
|
|
|
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
*val = readl(ap->ioaddr.scr_addr + (sc_reg * 8));
|
|
return 0;
|
|
}
|
|
|
|
static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
writel(val, ap->ioaddr.scr_addr + (sc_reg * 8));
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int qs_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scatterlist *sg;
|
|
struct ata_port *ap = qc->ap;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
unsigned int nelem;
|
|
u8 *prd = pp->pkt + QS_CPB_BYTES;
|
|
|
|
WARN_ON(qc->__sg == NULL);
|
|
WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
|
|
|
|
nelem = 0;
|
|
ata_for_each_sg(sg, qc) {
|
|
u64 addr;
|
|
u32 len;
|
|
|
|
addr = sg_dma_address(sg);
|
|
*(__le64 *)prd = cpu_to_le64(addr);
|
|
prd += sizeof(u64);
|
|
|
|
len = sg_dma_len(sg);
|
|
*(__le32 *)prd = cpu_to_le32(len);
|
|
prd += sizeof(u64);
|
|
|
|
VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
|
|
(unsigned long long)addr, len);
|
|
nelem++;
|
|
}
|
|
|
|
return nelem;
|
|
}
|
|
|
|
static void qs_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct qs_port_priv *pp = qc->ap->private_data;
|
|
u8 dflags = QS_DF_PORD, *buf = pp->pkt;
|
|
u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD;
|
|
u64 addr;
|
|
unsigned int nelem;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
qs_enter_reg_mode(qc->ap);
|
|
if (qc->tf.protocol != ATA_PROT_DMA) {
|
|
ata_qc_prep(qc);
|
|
return;
|
|
}
|
|
|
|
nelem = qs_fill_sg(qc);
|
|
|
|
if ((qc->tf.flags & ATA_TFLAG_WRITE))
|
|
hflags |= QS_HF_DIRO;
|
|
if ((qc->tf.flags & ATA_TFLAG_LBA48))
|
|
dflags |= QS_DF_ELBA;
|
|
|
|
/* host control block (HCB) */
|
|
buf[ 0] = QS_HCB_HDR;
|
|
buf[ 1] = hflags;
|
|
*(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nbytes);
|
|
*(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem);
|
|
addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
|
|
*(__le64 *)(&buf[16]) = cpu_to_le64(addr);
|
|
|
|
/* device control block (DCB) */
|
|
buf[24] = QS_DCB_HDR;
|
|
buf[28] = dflags;
|
|
|
|
/* frame information structure (FIS) */
|
|
ata_tf_to_fis(&qc->tf, 0, 1, &buf[32]);
|
|
}
|
|
|
|
static inline void qs_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0);
|
|
wmb(); /* flush PRDs and pkt to memory */
|
|
writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF);
|
|
readl(chan + QS_CCT_CFF); /* flush */
|
|
}
|
|
|
|
static unsigned int qs_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct qs_port_priv *pp = qc->ap->private_data;
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
|
|
pp->state = qs_state_pkt;
|
|
qs_packet_start(qc);
|
|
return 0;
|
|
|
|
case ATA_PROT_ATAPI_DMA:
|
|
BUG();
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pp->state = qs_state_mmio;
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static inline unsigned int qs_intr_pkt(struct ata_host *host)
|
|
{
|
|
unsigned int handled = 0;
|
|
u8 sFFE;
|
|
u8 __iomem *mmio_base = qs_mmio_base(host);
|
|
|
|
do {
|
|
u32 sff0 = readl(mmio_base + QS_HST_SFF);
|
|
u32 sff1 = readl(mmio_base + QS_HST_SFF + 4);
|
|
u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */
|
|
sFFE = sff1 >> 31; /* empty flag */
|
|
|
|
if (sEVLD) {
|
|
u8 sDST = sff0 >> 16; /* dev status */
|
|
u8 sHST = sff1 & 0x3f; /* host status */
|
|
unsigned int port_no = (sff1 >> 8) & 0x03;
|
|
struct ata_port *ap = host->ports[port_no];
|
|
|
|
DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
|
|
sff1, sff0, port_no, sHST, sDST);
|
|
handled = 1;
|
|
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct ata_queued_cmd *qc;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
if (!pp || pp->state != qs_state_pkt)
|
|
continue;
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
switch (sHST) {
|
|
case 0: /* successful CPB */
|
|
case 3: /* device error */
|
|
pp->state = qs_state_idle;
|
|
qs_enter_reg_mode(qc->ap);
|
|
qc->err_mask |= ac_err_mask(sDST);
|
|
ata_qc_complete(qc);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} while (!sFFE);
|
|
return handled;
|
|
}
|
|
|
|
static inline unsigned int qs_intr_mmio(struct ata_host *host)
|
|
{
|
|
unsigned int handled = 0, port_no;
|
|
|
|
for (port_no = 0; port_no < host->n_ports; ++port_no) {
|
|
struct ata_port *ap;
|
|
ap = host->ports[port_no];
|
|
if (ap &&
|
|
!(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct ata_queued_cmd *qc;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
if (!pp || pp->state != qs_state_mmio)
|
|
continue;
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
|
|
/* check main status, clearing INTRQ */
|
|
u8 status = ata_check_status(ap);
|
|
if ((status & ATA_BUSY))
|
|
continue;
|
|
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
|
|
ap->print_id, qc->tf.protocol, status);
|
|
|
|
/* complete taskfile transaction */
|
|
pp->state = qs_state_idle;
|
|
qc->err_mask |= ac_err_mask(status);
|
|
ata_qc_complete(qc);
|
|
handled = 1;
|
|
}
|
|
}
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static irqreturn_t qs_intr(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
unsigned int handled = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
spin_lock(&host->lock);
|
|
handled = qs_intr_pkt(host) | qs_intr_mmio(host);
|
|
spin_unlock(&host->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void qs_ata_setup_port(struct ata_ioports *port, void __iomem *base)
|
|
{
|
|
port->cmd_addr =
|
|
port->data_addr = base + 0x400;
|
|
port->error_addr =
|
|
port->feature_addr = base + 0x408; /* hob_feature = 0x409 */
|
|
port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */
|
|
port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */
|
|
port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */
|
|
port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */
|
|
port->device_addr = base + 0x430;
|
|
port->status_addr =
|
|
port->command_addr = base + 0x438;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + 0x440;
|
|
port->scr_addr = base + 0xc00;
|
|
}
|
|
|
|
static int qs_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct qs_port_priv *pp;
|
|
void __iomem *mmio_base = qs_mmio_base(ap->host);
|
|
void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
|
|
u64 addr;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
qs_enter_reg_mode(ap);
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
pp->pkt = dmam_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma,
|
|
GFP_KERNEL);
|
|
if (!pp->pkt)
|
|
return -ENOMEM;
|
|
memset(pp->pkt, 0, QS_PKT_BYTES);
|
|
ap->private_data = pp;
|
|
|
|
addr = (u64)pp->pkt_dma;
|
|
writel((u32) addr, chan + QS_CCF_CPBA);
|
|
writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
|
|
return 0;
|
|
}
|
|
|
|
static void qs_host_stop(struct ata_host *host)
|
|
{
|
|
void __iomem *mmio_base = qs_mmio_base(host);
|
|
|
|
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
|
|
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
|
|
}
|
|
|
|
static void qs_host_init(struct ata_host *host, unsigned int chip_id)
|
|
{
|
|
void __iomem *mmio_base = host->iomap[QS_MMIO_BAR];
|
|
unsigned int port_no;
|
|
|
|
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
|
|
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
|
|
|
|
/* reset each channel in turn */
|
|
for (port_no = 0; port_no < host->n_ports; ++port_no) {
|
|
u8 __iomem *chan = mmio_base + (port_no * 0x4000);
|
|
writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
|
|
writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
|
|
readb(chan + QS_CCT_CTR0); /* flush */
|
|
}
|
|
writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
|
|
|
|
for (port_no = 0; port_no < host->n_ports; ++port_no) {
|
|
u8 __iomem *chan = mmio_base + (port_no * 0x4000);
|
|
/* set FIFO depths to same settings as Windows driver */
|
|
writew(32, chan + QS_CFC_HUFT);
|
|
writew(32, chan + QS_CFC_HDFT);
|
|
writew(10, chan + QS_CFC_DUFT);
|
|
writew( 8, chan + QS_CFC_DDFT);
|
|
/* set CPB size in bytes, as a power of two */
|
|
writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP);
|
|
}
|
|
writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */
|
|
}
|
|
|
|
/*
|
|
* The QStor understands 64-bit buses, and uses 64-bit fields
|
|
* for DMA pointers regardless of bus width. We just have to
|
|
* make sure our DMA masks are set appropriately for whatever
|
|
* bridge lies between us and the QStor, and then the DMA mapping
|
|
* code will ensure we only ever "see" appropriate buffer addresses.
|
|
* If we're 32-bit limited somewhere, then our 64-bit fields will
|
|
* just end up with zeros in the upper 32-bits, without any special
|
|
* logic required outside of this routine (below).
|
|
*/
|
|
static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
|
|
{
|
|
u32 bus_info = readl(mmio_base + QS_HID_HPHY);
|
|
int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
|
|
|
|
if (have_64bit_bus &&
|
|
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"64-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
} else {
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int qs_ata_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
const struct ata_port_info *ppi[] = { &qs_port_info[board_idx], NULL };
|
|
struct ata_host *host;
|
|
int rc, port_no;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* alloc host */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, QS_PORTS);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
/* acquire resources and fill host */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if ((pci_resource_flags(pdev, QS_MMIO_BAR) & IORESOURCE_MEM) == 0)
|
|
return -ENODEV;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << QS_MMIO_BAR, DRV_NAME);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
rc = qs_set_dma_masks(pdev, host->iomap[QS_MMIO_BAR]);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (port_no = 0; port_no < host->n_ports; ++port_no) {
|
|
struct ata_port *ap = host->ports[port_no];
|
|
unsigned int offset = port_no * 0x4000;
|
|
void __iomem *chan = host->iomap[QS_MMIO_BAR] + offset;
|
|
|
|
qs_ata_setup_port(&ap->ioaddr, chan);
|
|
|
|
ata_port_pbar_desc(ap, QS_MMIO_BAR, -1, "mmio");
|
|
ata_port_pbar_desc(ap, QS_MMIO_BAR, offset, "port");
|
|
}
|
|
|
|
/* initialize adapter */
|
|
qs_host_init(host, board_idx);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, qs_intr, IRQF_SHARED,
|
|
&qs_ata_sht);
|
|
}
|
|
|
|
static int __init qs_ata_init(void)
|
|
{
|
|
return pci_register_driver(&qs_ata_pci_driver);
|
|
}
|
|
|
|
static void __exit qs_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&qs_ata_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Mark Lord");
|
|
MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(qs_ata_init);
|
|
module_exit(qs_ata_exit);
|