Mika Westerberg
2479c7300e
pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOs
...
If the pin is in HiZ mode when it is requested as GPIO its value cannot be
read (it always returns 0). In order to cope with the Linux GPIO subsystem
where we do not have such state at all, turn the pin to be input instead.
Reported-by: Jerome Blin <jerome.blin@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-04 09:59:26 +01:00
..
2014-10-20 16:21:21 +02:00
2015-02-03 14:02:55 +01:00
2015-02-04 09:59:26 +01:00
2015-01-26 09:13:00 +01:00
2015-01-14 14:21:53 +01:00
2015-01-11 22:32:19 +01:00
2015-01-30 14:36:33 +01:00
2015-01-19 11:04:47 +01:00
2015-01-29 10:40:38 +01:00
2015-01-14 14:21:54 +01:00
2014-12-14 16:10:09 -08:00
2015-01-14 14:21:52 +01:00
2014-10-20 16:21:26 +02:00
2015-01-14 14:20:33 +01:00
2014-02-24 10:44:54 +01:00
2015-01-26 09:13:00 +01:00
2015-01-26 09:13:00 +01:00
2015-01-14 14:21:38 +01:00
2015-01-11 22:32:19 +01:00
2015-01-11 22:32:19 +01:00
2014-02-25 10:49:13 +01:00
2014-02-25 10:49:13 +01:00
2014-09-05 10:33:51 +02:00
2014-02-25 10:49:13 +01:00
2014-10-20 16:21:21 +02:00
2014-12-14 16:10:09 -08:00
2014-10-29 09:28:35 +01:00
2015-01-14 14:21:53 +01:00
2014-10-20 16:21:21 +02:00
2014-07-22 16:34:12 +02:00
2015-01-21 11:02:26 +01:00
2014-09-04 10:05:07 +02:00
2014-04-22 08:41:35 +02:00
2014-10-20 16:21:21 +02:00
2015-01-30 10:38:36 +01:00
2014-10-20 16:21:21 +02:00
2015-01-07 10:44:39 +01:00
2014-12-14 16:10:09 -08:00
2014-10-20 16:21:21 +02:00
2014-10-20 16:21:21 +02:00
2014-10-20 16:21:21 +02:00
2014-10-20 16:21:21 +02:00
2014-12-14 14:57:16 -08:00
2014-09-04 10:05:07 +02:00
2014-04-22 16:55:41 +02:00
2015-01-11 22:32:19 +01:00
2015-01-11 22:32:19 +01:00
2014-10-20 16:21:21 +02:00
2013-08-28 15:50:33 +02:00
2013-08-14 21:00:41 +02:00
2015-01-14 14:20:46 +01:00
2015-01-30 14:30:59 +01:00
2014-09-04 10:05:07 +02:00